C++ run_cmd函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中run_cmd函数的典型用法代码示例。如果您正苦于以下问题：C++ run_cmd函数的具体用法？C++ run_cmd怎么用？C++ run_cmd使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了run_cmd函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: set_firewall_rule

static int
set_firewall_rule(char *addr, int add)
{
    char cli[256];
    struct cork_ip ip;

    if (getuid() != 0)
        return -1;

    if (cork_ip_init(&ip, addr))
        return -1;

    if (add) {
        if (mode == IPTABLES_MODE)
            sprintf(cli, ip.version == 4 ? iptables_add_rule : ip6tables_add_rule,
                    chain_name, addr);
        else if (mode == FIREWALLD_MODE)
            sprintf(cli, ip.version == 4 ? firewalld_add_rule : firewalld6_add_rule,
                    chain_name, addr);
        return run_cmd(cli);
    } else {
        if (mode == IPTABLES_MODE)
            sprintf(cli, ip.version == 4 ? iptables_remove_rule : ip6tables_remove_rule,
                    chain_name, addr);
        else if (mode == FIREWALLD_MODE)
            sprintf(cli, ip.version == 4 ? firewalld_remove_rule : firewalld6_remove_rule,
                    chain_name, addr);
        return run_cmd(cli);
    }

    return 0;
}

开发者ID:ss-plus，项目名称:shadowsocksR-libev，代码行数:32，代码来源:acl.c

示例2: test_dsync_proxy_box_create

static void test_dsync_proxy_box_create(void)
{
	struct test_dsync_box_event event;

	test_begin("proxy server box create");

	test_assert(run_cmd("BOX-CREATE", "noselect", "/",
			    "553", "1", NULL) == 1);
	test_assert(test_dsync_worker_next_box_event(test_worker, &event));
	test_assert(event.type == LAST_BOX_TYPE_CREATE);
	test_assert(strcmp(event.box.name, "noselect") == 0);
	test_assert(event.box.name_sep == '/');
	test_assert(event.box.last_change == 553);
	test_assert(event.box.flags == DSYNC_MAILBOX_FLAG_NOSELECT);
	test_assert(event.box.uid_validity == 0);

	test_assert(run_cmd("BOX-CREATE", "selectable", "?",
			    "61", "2", TEST_MAILBOX_GUID2, "1234567890", "9876",
			    "4610", "28427847284728", "853", NULL) == 1);
	test_assert(test_dsync_worker_next_box_event(test_worker, &event));
	test_assert(event.type == LAST_BOX_TYPE_CREATE);
	test_assert(strcmp(event.box.name, "selectable") == 0);
	test_assert(event.box.name_sep == '?');
	test_assert(memcmp(event.box.mailbox_guid.guid, test_mailbox_guid2, MAIL_GUID_128_SIZE) == 0);
	test_assert(event.box.flags == 2);
	test_assert(event.box.uid_validity == 1234567890);
	test_assert(event.box.uid_next == 9876);
	test_assert(event.box.message_count == 4610);
	test_assert(event.box.highest_modseq == 28427847284728);
	test_assert(event.box.first_recent_uid == 853);
	test_assert(event.box.last_change == 61);

	test_end();
}

开发者ID:aosm，项目名称:dovecot，代码行数:34，代码来源:test-dsync-proxy-server-cmd.c

示例3: _startpipe

int _startpipe(int* fd, int argc1, char **argv1, int argc2, char **argv2) {
	int pid1 = fork();
	int pid2;
	_pid1=pid1;
	_pid2=pid2;
	int exitc1;
	int exitc2;
	signal(SIGDONE,sd_hd);
	switch (pid1) {
		case -1:
			fprintf(stderr,"%s: fork: operation failed",shellname);
			kill(pid2,SIGKILL);
			return 1;
		case 0:
			// child process
			close(0);	// close stdin
			dup(fd[0]); // connect stdin with pipe read end
			close(fd[1]); // close write end of pipe
			int c2 = run_cmd(argc2,argv2);
			close(fd[0]); // close pipe read end
			close(1); // close stdout
			exit(c2); // terminate child
			break;
		default:
			// parent process
			pid2=fork();
			switch (pid2) {
				case -1:
					fprintf(stderr,"%s: fork: operation failed",shellname);
					kill(pid1,SIGKILL);
					return 1;
				case 0:
					// child process
					close(1); // close stdout
					dup(fd[1]); // connect stdout with pipe write end
					close(fd[0]); // close read end of pipe 
					int c = run_cmd(argc1,argv1);
					close(fd[1]); // close pipe write end
					close(0); // close stdin
					kill(pid1,SIGTERM); // terminate child 1
					kill(getppid(),SIGDONE);
					exit(c); // terminate child 
					
					break;
			
			}
			
	}
	
	pause();
	fflush(stdout);
	lastpid=pid2;
	exitcode=exitc2; 
	pipeargc=0;
	pipeargv=NULL;
	return exitc2;
}

开发者ID:marcsances，项目名称:zesh，代码行数:57，代码来源:builtins.c

示例4: test_run_cmd

static int test_run_cmd(void)
{
	int ret;
	ret = run_cmd("/bin/ls", "/", (char*)NULL);
	if (ret)
		return ret;
	ret = run_cmd("/bin/ls", (char*)NULL);
	if (ret)
		return ret;
	return 0;
}

开发者ID:cmccabe，项目名称:cmccabe-daemon-utils，代码行数:11，代码来源:run_cmd_unit.c

示例5: test_dsync_proxy_box_select

static void test_dsync_proxy_box_select(void)
{
	test_begin("proxy server box select");

	test_assert(run_cmd("BOX-SELECT", TEST_MAILBOX_GUID1, NULL) == 1);
	test_assert(memcmp(test_worker->selected_mailbox.guid, test_mailbox_guid1, MAIL_GUID_128_SIZE) == 0);

	test_assert(run_cmd("BOX-SELECT", TEST_MAILBOX_GUID2, NULL) == 1);
	test_assert(memcmp(test_worker->selected_mailbox.guid, test_mailbox_guid2, MAIL_GUID_128_SIZE) == 0);

	test_end();
}

开发者ID:aosm，项目名称:dovecot，代码行数:12，代码来源:test-dsync-proxy-server-cmd.c

示例6: init_vxlan

int
init_vxlan()
{
    /*
     *  Run the following:
     *  ip link add vxlan0 type vxlan id 1 group 239.0.0.1 dev eth0
     *  ip link set vxlan0 up
     */
    int retry;
    int success = -1;


    if (vxlan_exists() != 0) {
        char *add_link_cmd[] = {"ip", "link", "add", server.vxlan_name, "type", "vxlan", "id", server.vxlan_vni, "dev", server.vxlan_interface, 0};
        for (retry = 0; retry < server.vxlan_max_retries; retry++) {
            if ((success = run_cmd(add_link_cmd)) == 0) {
                break;
            } else {
                red_log(REDD_WARNING, "Failed to create link %s", server.vxlan_name);
                sleep(1);
                red_log(REDD_WARNING, "Retrying to create link %s", server.vxlan_name);
            }
        }
    }

    if (success == -1) return -1;

    char *set_link_cmd[] = {"ip", "link", "set", server.vxlan_name, "up", 0};
    for (retry = 0; retry < server.vxlan_max_retries; retry++) {
        if ((success = run_cmd(set_link_cmd)) == 0)	{
            break;
        } else {
            red_log(REDD_WARNING, "Failed to set link %s up", server.vxlan_name);
            sleep(1);
            red_log(REDD_WARNING, "Retrying to set link %s up", server.vxlan_name);
        }
    }

    if (success == -1) return -1;

    char *set_route_cmd[] = {"bridge", "fdb", "add", "to", "00:00:00:00:00:00", "dst", server.vxlan_group, "via", server.tun_name, "dev", server.vxlan_name, 0};
    for (retry = 0; retry < server.vxlan_max_retries; retry++) {
        if ((success = run_cmd(set_route_cmd)) == 0) {
            break;
        } else {
            red_log(REDD_WARNING, "Failed to set route %s", server.vxlan_name);
            sleep(1);
            red_log(REDD_WARNING, "Retrying to set route %s", server.vxlan_name);
        }
    }
    return success;
}

开发者ID:nanopack，项目名称:redd，代码行数:52，代码来源:vxlan.c

示例7: swap_on_off_gbde

static const char *
swap_on_off_gbde(const char *name, int doingall)
{
	const char *ret;
	char pass[64 * 2 + 1];
	unsigned char bpass[64];
	char *dname;
	int i, error;

	dname = swap_basename(name);
	if (dname == NULL)
		return (NULL);

	if (which_prog == SWAPON) {
		arc4random_buf(bpass, sizeof(bpass));
		for (i = 0; i < (int)sizeof(bpass); i++)
			sprintf(&pass[2 * i], "%02x", bpass[i]);
		pass[sizeof(pass) - 1] = '\0';

		error = run_cmd(NULL, "%s init %s -P %s", _PATH_GBDE,
		    dname, pass);
		if (error) {
			/* bde device found.  Ignore it. */
			free(dname);
			if (qflag == 0)
				warnx("%s: Device already in use", name);
			return (NULL);
		}
		error = run_cmd(NULL, "%s attach %s -p %s", _PATH_GBDE,
		    dname, pass);
		free(dname);
		if (error) {
			warnx("gbde (attach) error: %s", name);
			return (NULL);
		}
	}

	ret = swap_on_off_sfile(name, doingall);

	if (which_prog == SWAPOFF) {
		error = run_cmd(NULL, "%s detach %s", _PATH_GBDE, dname);
		free(dname);
		if (error) {
			/* bde device not found.  Ignore it. */
			if (qflag == 0)
				warnx("%s: Device not found", name);
			return (NULL);
		}
	}

	return (ret);
}

开发者ID:coyizumi，项目名称:cs111，代码行数:52，代码来源:swapon.c

示例8: main

int main(POSSIBLY_UNUSED(int argc), char **argv)
{
	char st_trivial[PATH_MAX];

	EXPECT_ZERO(get_colocated_path(argv[0], "st_trivial",
			      st_trivial, sizeof(st_trivial)));
	EXPECT_ZERO(run_cmd(st_trivial, "-h", (char*)NULL));
	EXPECT_ZERO(run_cmd(st_trivial, "-f", (char*)NULL));
	snprintf(env_str, sizeof(env_str), "ST_ERROR=1");
	putenv(env_str);
	EXPECT_NONZERO(run_cmd(st_trivial, "-f", (char*)NULL));
	return 0;
}

开发者ID:cmccabe，项目名称:redfish，代码行数:13，代码来源:trivial_unit.c

示例9: run_script

int run_script(const char *s_file)
{
    char *line = NULL;
    size_t len;
    FILE *script;

    script = fopen(s_file, "r");

    if (!script) {
        printf("Error opening script '%s'\n", s_file);
        return -1;
    }

    while ((len = getline(&line, &len, script)) != -1 && !exit_inp_loop) {
        if (line[len - 1] == '\n')
            line[len - 1] = '\0';
        if (len == 1)
            continue ;
        printf("%s%s\n", prompt, line);
        run_cmd(line);
    }

    fclose(script);
    free(line);

    return 0;
}

开发者ID:DSMan195276，项目名称:cmips，代码行数:27，代码来源:input.c

示例10: main

int main() {
	char *line = malloc(2*MAX_LINE_SIZE * sizeof(char) + 1);
	char * const *args = malloc(MAX_ARGS*2 * sizeof(char*));
	int *cmds = malloc(21 * sizeof(int));
	int reached_eof = 0;
	while(!reached_eof) {
		if(signal(SIGINT, s_handler) == SIG_ERR) {
		      printf("Error catching interrupt signal.\n");
		}
		//if(signal(SIGCHLD, SIG_IGN) == SIG_ERR) {
		//    printf("Error catching child signal.\n");
		//}
		
		int status, pid;
		while((pid=waitpid(-1, &status, WNOHANG)) > 0) {
		    printf("Child process %d exited.\n", pid);
		}
		background = 0;
		printf("%s", PROMPT);
		reached_eof = read_line(line, MAX_LINE_SIZE + 1);
		if(*line == '\n') {
		    continue;
		}
		int num_cmds = parse(line, (char**)args, cmds);
		if(num_cmds == 1) {
		    execute(*args, args);
		}
		else {
		    run_cmd(args, cmds, num_cmds);
		}
	}
	free(line);
	free((char**)args);
	free(cmds);
}

开发者ID:simon-eh，项目名称:hw9，代码行数:35，代码来源:sehll.c

示例11: main

int main (int argc, char **argv)
{
	int rt, i, size = 0;
	char *cmd;
	char output[1024] = {};

	if (argc == 1)
		return 0;

	for (i = 1; i < argc; ++i)
		size += (strlen(argv[i]) + 1);

	cmd = (char *) malloc(size + 1);

	for (i = 1; i < argc; ++i) {
		strcat(cmd, argv[i]);
		strcat(cmd, " ");
	}

	printf("Command line : %s\n", cmd);
	rt = run_cmd(cmd, output, 1024);
	if (!rt)
		fprintf(stderr, "Execution failed\n");
	else
		printf("%s\n", output);

	free(cmd);

	return 0;
}

开发者ID:RoyMenczer，项目名称:ibssa2，代码行数:30，代码来源:ssa_signal_handler.c

示例12: adb_init_busybox

int adb_init_busybox(void)
{
    mkdir("/mrom_bin", 0777);

    copy_file(busybox_path, "/mrom_bin/busybox");
    chmod("/mrom_bin/busybox", 0755);

    static const char *install_cmd[] = {
        "/mrom_bin/busybox", "--install", "/mrom_bin/", NULL
    };

    if(run_cmd((char**)install_cmd) != 0)
    {
        ERROR("adb: failed to --install busybox\n");
        return -1;
    }

    mkdir("/dev/pts", 0666);
    if(mount("devpts", "/dev/pts", "devpts", 0, NULL) < 0)
    {
        ERROR("Failed to mount devpts: %d (%s)\n", errno, strerror(errno));
        return -1;
    }

    return 0;
}

开发者ID:DaveDaCoda，项目名称:multirom，代码行数:26，代码来源:adb.c

示例13: test_dsync_proxy_msg_save

static void test_dsync_proxy_msg_save(void)
{
	static const char *input = "..dotty\n..behavior\nfrom you\n.\nstop";
	struct test_dsync_msg_event event;
	const unsigned char *data;
	size_t size;

	test_begin("proxy server msg save");

	server->input = i_stream_create_from_data(input, strlen(input));

	test_assert(run_cmd("MSG-SAVE", "28492428", "pop3uidl",
			    "saveguid", "874", "33982482882924", "\\Flagged bar \\Answered",
			    "8294284", NULL) == 1);
	test_assert(test_dsync_worker_next_msg_event(test_worker, &event));
	test_assert(event.type == LAST_MSG_TYPE_SAVE);
	test_assert(event.save_data.received_date == 28492428);
	test_assert(strcmp(event.save_data.pop3_uidl, "pop3uidl") == 0);
	test_assert(strcmp(event.save_body, ".dotty\n.behavior\nfrom you") == 0);

	test_assert(strcmp(event.msg.guid, "saveguid") == 0);
	test_assert(event.msg.uid == 874);
	test_assert(event.msg.modseq == 33982482882924);
	test_assert(event.msg.flags == (MAIL_FLAGGED | MAIL_ANSWERED));
	test_assert(strcmp(event.msg.keywords[0], "bar") == 0);
	test_assert(event.msg.keywords[1] == NULL);
	test_assert(event.msg.save_date == 8294284);

	data = i_stream_get_data(server->input, &size);
	test_assert(size == 4 && memcmp(data, "stop", 4) == 0);
	i_stream_destroy(&server->input);

	test_end();
}

开发者ID:aosm，项目名称:dovecot，代码行数:34，代码来源:test-dsync-proxy-server-cmd.c

示例14: run_input_loop

void run_input_loop(void)
{
    char *line = NULL;

    if (cmips_arg_state.cmd_script) {
        run_script(cmips_arg_state.cmd_script);
        return ;
    }

    rl_attempted_completion_function = complete_line;

    do {
        line = readline(prompt);
        if (line && *line)
            add_history(line);
        else
            continue;

        run_cmd(line);

        if (line)
            free(line);
    } while (!exit_inp_loop);

    clear_history();
}

开发者ID:DSMan195276，项目名称:cmips，代码行数:26，代码来源:input.c

示例15: WinMain

int WINAPI WinMain(HINSTANCE a1, HINSTANCE a2, LPSTR a3, int a4)
{
	int answer = 0;
	answer = MessageBox(0, "Click 'Yes' to dump iotrace to a file (iotrace.log)", THIS_PROG_NAME, MB_YESNO);
	if (answer == IDYES)
	{

#if 1
		run_cmd(TRACE_CMD__DUMP);
		/* seek and destroy the files called 'kernel.etl'
		 * on the first depth of directory of corresponding disk,
		 * for example, 'F:\kernel.etl' */
//		run_cmd(TRACE_CMD__TRANSFORM);
#else
		WinExec(TRACE_CMD__START, SW_HIDE);
		Sleep(TRACE_TIME__IN_MILLI_SECOND);
		WinExec(TRACE_CMD__DUMP, SW_HIDE);
		WinExec(TRACE_CMD__TRANSFORM, SW_HIDE);
#endif
	}
	else /* answer == IDNO */
	{
#if 1
		MessageBox(0, "Nothing happened.\n\nMany Thanks,\nBrian", THIS_PROG_NAME, MB_OK);
#else
//		run_cmd("\"c:\\windows\\system32\\calc.exe\"");
//		WinExec("c:\\windows\\system32\\calc.exe", SW_HIDE);
		WinExec("calc", SW_HIDE);
#endif
	}

	return 0;
}

开发者ID:blusjune，项目名称:.bd，代码行数:33，代码来源:wintrace_dump.c

示例16: run_script

int run_script(FILE *script)
{
	int scripting = 1;
	int size;
	char **args, cmd[100];
	
	while (scripting && !feof(script)) {
		size = 0;
		redirect_in = 0;
	
		dup2(defin, STDIN_FILENO);
		dup2(defout, STDOUT_FILENO);

        /* get the input from user. */
        fgets(cmd, 100, script);
		
		args = parse_cmd(cmd, &size);
		
		if (pipeFlag) {
			scripting = run_pipe_cmd(size, args);
			pipeFlag = 0;
		} else {
			scripting = run_cmd(size, args);
		}
    }
	return cmd_exit_status;
}

开发者ID:luok，项目名称:XSSH，代码行数:27，代码来源:xssh.c

示例17: strlen

static char
*get_save_file_path(char *file_name)
{
	char *save_file_name;
	struct stat file_stat;
	int len;
	if (stat(server.save_path, &file_stat) != 0) {
		char *cmd[] = {"mkdir", "-p", server.save_path, 0};
		if (!run_cmd(cmd))
			return NULL;
	}
	if (server.save_path == NULL) {
		return NULL;
	}
	len = strlen(server.save_path);
	if (len == 0) {
		return NULL;
	}
	if (server.save_path[len - 1] == '/') {
		save_file_name = (char *)malloc(len + strlen(file_name) + 1);
		sprintf(save_file_name, "%s%s", server.save_path, file_name);
	} else {
		save_file_name = (char *)malloc(len + strlen(file_name) + 2);
		sprintf(save_file_name, "%s/%s", server.save_path, file_name);
	}
	return save_file_name;
}

开发者ID:nanopack，项目名称:redd，代码行数:27，代码来源:helper.c

示例18: reset_firewall

static int
reset_firewall()
{
    int ret = 0;
    char cli[256];

    if (getuid() != 0)
        return -1;

    if (mode == IPTABLES_MODE) {
        sprintf(cli, ip6tables_remove_chain, chain_name, chain_name, chain_name);
        ret |= system(cli);
        sprintf(cli, iptables_remove_chain, chain_name, chain_name, chain_name);
        ret |= system(cli);
    } else if (mode == FIREWALLD_MODE) {
        sprintf(cli, firewalld6_remove_chain, chain_name, chain_name, chain_name);
        ret |= system(cli);
        sprintf(cli, firewalld_remove_chain, chain_name, chain_name, chain_name);
        ret |= system(cli);
    }

    if (shell_stdin != NULL) {
        run_cmd("exit 0");
        pclose(shell_stdin);
    }

    return ret;
}

开发者ID:ss-plus，项目名称:shadowsocksR-libev，代码行数:28，代码来源:acl.c

示例19: process_file

int process_file(char *batch_file)
{
	FILE * batch_stream;
	char *cmdLine;
	READ_STATUS s;

	batch_stream = fopen(batch_file, "r");

	if (batch_stream == NULL) {
		printError();
		return 1;
	}

	for (s = readInput(batch_stream, &cmdLine);
		 (s != INPUT_READ_EOF) && (s != INPUT_READ_ERROR);
		 s = readInput(batch_stream, &cmdLine)) {

		if (s == INPUT_READ_OVERFLOW) {
			display_full_command(cmdLine);
			free(cmdLine);
			continue;
		}
		run_cmd(cmdLine, BATCH_MODE);
	}
	fclose(batch_stream);
	return 0;
}

开发者ID:smihir，项目名称:homework，代码行数:27，代码来源:mysh.c

示例20: __wrap_main

int
__wrap_main(int argc, char **argv)  // , char **envp
{
    // NOTE: parse all ctrl args at beg (or end -- easy to discard)
    while (argc > 1) {
        if (!strcmp(argv[1], "-src-path")) {
            printf("%s\n", src_path);
            return 0;
        } else if (!strcmp(argv[1], "-no-rebuild")) {
            return __real_main(argc, argv);
        } else
            break;
        --argc, argv[1] = argv[0], argv++;
    }

    char bin_path[PATH_MAX] = {0};
    if (0 >= readlink("/proc/self/exe", bin_path, PATH_MAX)) {
        error(2, errno, "readlink(\"%s\")", argv[0]);
    }

    // WARN: rebuild won't be triggered
    //  * changes saved directly during compilation
    //      ALT:(slow): -cmp-hash and func_ptr
    //  * updated static libs  ALT:(slow): use make
    if (0 < timestamp_cmp(src_path, bin_path)) {
        if (0 != run_cmd(recompile_cmdv))
            return 99;
        execvp(bin_path, argv);
        error(9, errno, "execvp");
    }
    return __real_main(argc, argv);
}

开发者ID:amerlyq，项目名称:airy，代码行数:32，代码来源:selfcompile.c

注：本文中的run_cmd函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ run_command函数代码示例发布时间：2022-05-30

C++ runWithScene函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ run_cmd函数代码示例

示例1: set_firewall_rule

示例2: test_dsync_proxy_box_create

示例3: _startpipe

示例4: test_run_cmd

示例5: test_dsync_proxy_box_select

示例6: init_vxlan

示例7: swap_on_off_gbde

示例8: main

示例9: run_script

示例10: main

示例11: main

示例12: adb_init_busybox

示例13: test_dsync_proxy_msg_save

示例14: run_input_loop

示例15: WinMain

示例16: run_script

示例17: strlen

示例18: reset_firewall

示例19: process_file

示例20: __wrap_main

请发表评论

全部评论

上一篇：

下一篇：

Ubuntu14.04下安装matlab2014a

bradtraversy/iweather: Ionic 3 mobile we

CVE-2020-27732

joaomh/curso-de-matlab

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053