• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ run函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中run函数的典型用法代码示例。如果您正苦于以下问题:C++ run函数的具体用法?C++ run怎么用?C++ run使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了run函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: complete

static void
complete(CamelMimeFilter *mf, char *in, size_t len, size_t prespace, char **out, size_t *outlenptr, size_t *outprespace)
{
	run(mf, in, len, prespace, out, outlenptr, outprespace, TRUE);
}
开发者ID:Codeminded,项目名称:tinymail,代码行数:5,代码来源:camel-mime-filter-html.c


示例2: main


//.........这里部分代码省略.........
  /* Finally, add rule in our forwarding table to pass to our virtual interface */
  {
    char *const route_args[] =
      {
	"ip", "route", "add", "default", "dev", dev,
	"table", DNS_TABLE, NULL
      };
    if (0 != fork_and_exec (sbin_ip, route_args))
      goto cleanup_forward_3;
  }

  /* drop privs *except* for the saved UID; this is not perfect, but better
     than doing nothing */
#ifdef HAVE_SETRESUID
  if (0 != setresuid (uid, uid, 0))
  {
    fprintf (stderr, "Failed to setresuid: %s\n", strerror (errno));
    r = 24;
    goto cleanup_route_4;
  }
#else
  /* Note: no 'setuid' here as we must keep our saved UID as root */
  if (0 != seteuid (uid))
  {
    fprintf (stderr, "Failed to seteuid: %s\n", strerror (errno));
    r = 24;
    goto cleanup_route_4;
  }
#endif

  r = 0; /* did fully setup routing table (if nothing else happens, we were successful!) */

  /* now forward until we hit a problem */
   run (fd_tun);

  /* now need to regain privs so we can remove the firewall rules we added! */
#ifdef HAVE_SETRESUID
  if (0 != setresuid (uid, 0, 0))
  {
    fprintf (stderr, "Failed to setresuid back to root: %s\n", strerror (errno));
    r = 40;
    goto cleanup_route_4;
  }
#else
  if (0 != seteuid (0))
  {
    fprintf (stderr, "Failed to seteuid back to root: %s\n", strerror (errno));
    r = 40;
    goto cleanup_route_4;
  }
#endif

  /* update routing tables again -- this is why we could not fully drop privs */
  /* now undo updating of routing tables; normal exit or clean-up-on-error case */
 cleanup_route_4:
  {
    char *const route_clean_args[] = 			
      {
	"ip", "route", "del", "default", "dev", dev,
	"table", DNS_TABLE, NULL
      };
    if (0 != fork_and_exec (sbin_ip, route_clean_args))
      r += 1;
  }
 cleanup_forward_3:
  {
开发者ID:claudiuolteanu,项目名称:gnunet-1,代码行数:67,代码来源:gnunet-helper-dns.c


示例3: dag_link

static void 
dag_link(struct dag * slf,char *output, char *match, char ** look, char ** lnk)
{
    
    int i, rv, main_count;
    char * args;
    struct pkg ** pks;
    
    if(slf->sorted){
        
        main_count = num_main_pkgs(slf);

        if( main_count > 1 ){
            pks = filter_relevant_main(slf, match);
        }else{
            pks = slf->sorted;
        }
        
        if( ! global_get_bool("-dryrun") ){
            if( dag_binary_up2date( pks , output ) ){
                if(! global_get_bool("-quiet")){
                    printf("up 2 date: %s\n", output );
                }
                return;
            }
        }

        struct strvec * v = new_strvec();
        
        v->add(v, global_get_str("-backend"));
        v->add(v, "-o");
        v->add(v, output );

        for(i = 0; pks[i]; i++){
            if(pks[i]->o_file){
                v->add(v, pks[i]->o_file);
            }
        }
        
        if(v->len(v) > 3){
            
            if(!global_get_bool("-quiet") && !global_get_bool("-dryrun") ) {
                printf("linking  : %s\n", output );
            }
            
            if( global_get_bool("-static") ){
                v->add(v, "-static");
            }
            
            if(look){
                for(i = 0; look[i]; i++){
                    v->add(v, "-L");
                    v->add(v, look[i]);
                }
            }

            if(lnk){
                for(i = 0; lnk[i]; i++){
                    v->add(v, "-l");
                    v->add(v, lnk[i]);
                }
            }

            args = v->join(v, " ");

            if(global_get_bool("-dryrun")) {
                printf("%s\n", args);
            }else{
                rv = run(args);
                if(rv == -1){ panic("failed to fork()",__FILE__,__LINE__); }
                if(rv){ exit(EXIT_FAILURE); }
            }
            
            free(args);
        }
        v->free(v);

        // we have allocated a new array if we filtered
        if( main_count > 1 ){
            free(pks);
        }
    }
};
开发者ID:bjarneh,项目名称:organice,代码行数:83,代码来源:dag.c


示例4: run

void TestFixture::run(const std::string &str)
{
    testToRun = str;
    run();
}
开发者ID:gscacco,项目名称:cppcheck,代码行数:5,代码来源:testsuite.cpp


示例5: ATF_TC_BODY

ATF_TC_BODY(glob_star_not, tc)
{
	run("a/**", 0, glob_star_not, __arraycount(glob_star_not));
}
开发者ID:Lxg1582,项目名称:freebsd,代码行数:4,代码来源:t_glob.c


示例6: run_and_delete

 void run_and_delete() {
     run();
     delete this;
 }
开发者ID:abners,项目名称:brpc,代码行数:4,代码来源:server.cpp


示例7: main

// This test is expected to be executed either by a regular
// user or by root. If executed by a regular user it doesn't
// test all the functions that would depend on changing the
// effective user id. If executed by a super-user everything
// gets tested. Here are different ways of execing the test binary:
// 1. regular user assuming user == yarn user
//    $ test-container-executor     
// 2. regular user with a given yarn user
//    $ test-container-executor yarn_user
// 3. super user with a given user and assuming user == yarn user
//    # test-container-executor user
// 4. super user with a given user and a given yarn user
//    # test-container-executor user yarn_user
int main(int argc, char **argv) {
  LOGFILE = stdout;
  ERRORFILE = stderr;

  // clean up any junk from previous run
  if (system("chmod -R u=rwx " TEST_ROOT "; rm -fr " TEST_ROOT)) {
    exit(1);
  }
  
  if (mkdirs(TEST_ROOT "/logs/userlogs", 0755) != 0) {
    exit(1);
  }
  
  if (write_config_file(TEST_ROOT "/test.cfg", 1) != 0) {
    exit(1);
  }
  read_config(TEST_ROOT "/test.cfg");

  local_dirs = extract_values(strdup(NM_LOCAL_DIRS));
  log_dirs = extract_values(strdup(NM_LOG_DIRS));

  create_nm_roots(local_dirs);

  // See the description above of various ways this test
  // can be executed in order to understand the following logic
  char* current_username = strdup(getpwuid(getuid())->pw_name);
  if (getuid() == 0 && (argc == 2 || argc == 3)) {
    username = argv[1];
    yarn_username = (argc == 3) ? argv[2] : argv[1];
  } else {
    username = current_username;
    yarn_username = (argc == 2) ? argv[1] : current_username;
  }
  set_nm_uid(geteuid(), getegid());

  if (set_user(username)) {
    exit(1);
  }

  printf("\nStarting tests\n");

  printf("\nTesting resolve_config_path()\n");
  test_resolve_config_path();

  printf("\nTesting get_user_directory()\n");
  test_get_user_directory();

  printf("\nTesting get_app_directory()\n");
  test_get_app_directory();

  printf("\nTesting get_container_directory()\n");
  test_get_container_directory();

  printf("\nTesting get_container_launcher_file()\n");
  test_get_container_launcher_file();

  printf("\nTesting get_app_log_dir()\n");
  test_get_app_log_dir();

  test_check_configuration_permissions();

  printf("\nTesting delete_container()\n");
  test_delete_container();

  printf("\nTesting delete_app()\n");
  test_delete_app();

  test_check_user();

  // the tests that change user need to be run in a subshell, so that
  // when they change user they don't give up our privs
  run_test_in_child("test_signal_container_group", test_signal_container_group);

  // init app and run container can't be run if you aren't testing as root
  if (getuid() == 0) {
    // these tests do internal forks so that the change_owner and execs
    // don't mess up our process.
    test_init_app();
    test_run_container();
  }

  seteuid(0);
  // test_delete_user must run as root since that's how we use the delete_as_user
  test_delete_user();
  free_configurations();

  printf("\nTrying banned default user()\n");
//.........这里部分代码省略.........
开发者ID:jiayuhan-it,项目名称:yarn-jyhtest,代码行数:101,代码来源:test-container-executor.c


示例8: run

void BundleRTS::apply() {
	run();
	output();
}
开发者ID:AutonomyLab,项目名称:visual_coslam,代码行数:4,代码来源:SL_CoSLAMBA.cpp


示例9: do_async

	typename std::shared_future<typename std::result_of<F(detail::convertible_to_async_helper)>::type> do_async(F f){
		auto ret = std::make_shared<detail::simple_async_function_holder<F>>(f);
		return ret->run();
	}
开发者ID:jbandela,项目名称:cpp_async_await,代码行数:4,代码来源:std_future_helper.hpp


示例10: m_device

GUIEngine::GUIEngine(	irr::IrrlichtDevice* dev,
						gui::IGUIElement* parent,
						IMenuManager *menumgr,
						scene::ISceneManager* smgr,
						MainMenuData* data,
						bool& kill) :
	m_device(dev),
	m_parent(parent),
	m_menumanager(menumgr),
	m_smgr(smgr),
	m_data(data),
	m_texture_source(NULL),
	m_sound_manager(NULL),
	m_formspecgui(0),
	m_buttonhandler(0),
	m_menu(0),
	m_kill(kill),
	m_startgame(false),
	m_script(0),
	m_scriptdir(""),
	m_irr_toplefttext(0),
	m_clouds_enabled(true),
	m_cloud()
{
	//initialize texture pointers
	for (unsigned int i = 0; i < TEX_LAYER_MAX; i++) {
		m_textures[i].texture = NULL;
	}
	// is deleted by guiformspec!
	m_buttonhandler = new TextDestGuiEngine(this);

	//create texture source
	m_texture_source = new MenuTextureSource(m_device->getVideoDriver());

	//create soundmanager
	MenuMusicFetcher soundfetcher;
#if USE_SOUND
	m_sound_manager = createOpenALSoundManager(&soundfetcher);
#endif
	if(!m_sound_manager)
		m_sound_manager = &dummySoundManager;

	//create topleft header
	std::wstring t = narrow_to_wide(std::string("")); // = narrow_to_wide(std::string("MultiCraft ") + g_version_hash);

	core::rect<s32> rect(0, 0, g_fontengine->getTextWidth(t), g_fontengine->getTextHeight());
	rect += v2s32(4, 0);

	m_irr_toplefttext =
		m_device->getGUIEnvironment()->addStaticText(t.c_str(),
		rect,false,true,0,-1);

	//create formspecsource
	m_formspecgui = new FormspecFormSource("");

	/* Create menu */
	m_menu = new GUIFormSpecMenu(m_device,
			m_parent,
			-1,
			m_menumanager,
			NULL /* &client */,
			NULL /* gamedef */,
			m_texture_source,
			m_formspecgui,
			m_buttonhandler,
			NULL,
			false);

	m_menu->allowClose(false);
	m_menu->lockSize(true,v2u32(800,600));

	// Initialize scripting

	infostream << "GUIEngine: Initializing Lua" << std::endl;

	m_script = new MainMenuScripting(this);

	try {
		if (m_data->errormessage != "") {
			m_script->setMainMenuErrorMessage(m_data->errormessage);
			m_data->errormessage = "";
		}

		if (!loadMainMenuScript()) {
			errorstream << "No future without mainmenu" << std::endl;
			abort();
		}

		run();
	}
	catch(LuaError &e) {
		errorstream << "MAINMENU ERROR: " << e.what() << std::endl;
		m_data->errormessage = e.what();
	}

	m_menu->quitMenu();
	m_menu->drop();
	m_menu = NULL;
}
开发者ID:4aiman,项目名称:MultiCraft,代码行数:99,代码来源:guiEngine.cpp


示例11: run

 MatrixXd MCDAQ_t::run_get_data() {
      run();
      return get_data();
 }
开发者ID:henryeherman,项目名称:echidna,代码行数:4,代码来源:mcdaq.hpp


示例12: filter

static void
filter(CamelMimeFilter *mf, char *in, size_t len, size_t prespace, char **out, size_t *outlenptr, size_t *outprespace)
{
	run(mf, in, len, prespace, out, outlenptr, outprespace, FALSE);
}
开发者ID:Codeminded,项目名称:tinymail,代码行数:5,代码来源:camel-mime-filter-html.c


示例13: cli_commands

void cli::start()
{
   cli_commands() = get_method_names(0);
   _run_complete = fc::async( [&](){ run(); } );
}
开发者ID:FollowMyVote,项目名称:fc,代码行数:5,代码来源:cli.cpp


示例14: main

int main(int argc, char *argv[])
{
    QApplication a(argc, argv);

    auto keys = QStyleFactory::keys();
    for (auto s : keys)
    {
        qDebug(s.toStdString().c_str());
    }

    QString ss = load_stylesheet(":/Stylesheets/common.qss");

#ifdef _6IT_UI_MOBILE
    ss.append(load_stylesheet(":/Stylesheets/common_mobile.qss"));
#else
    ss.append(load_stylesheet(":/Stylesheets/common_desktop.qss"));
#endif

#ifdef _6IT_QT_WINRT_DESKTOP
    ss.append(load_stylesheet(":/Stylesheets/winrt_desktop.qss"));
#elif defined(_6IT_QT_WINRT_PHONE)
    a.setStyle(QStyleFactory::create("Fusion"));
    ss.append(load_stylesheet(":/Stylesheets/winrt_phone.qss"));
#elif defined(_6IT_QT_WINRT_DESKTOP)
    ss.append(load_stylesheet(":/Stylesheets/windows_desktop.qss"));
#elif defined(_6IT_QT_IOS)
    ss.append(load_stylesheet(":/Stylesheets/ios.qss"));
#elif defined(_6IT_QT_ANDROID)
    a.setStyle(QStyleFactory::create("Fusion"));
    ss.append(load_stylesheet(":/Stylesheets/android.qss"));
#elif defined(_6IT_QT_LINUX_DESKTOP)
    ss.append(load_stylesheet(":/Stylesheets/linux_desktop.qss"));
#endif

    a.setStyleSheet(ss);

    QThread thread;
    auto pworker = new RZQtSubCWorker();
    auto &worker = *pworker;
    worker.moveToThread(&thread);
    thread.start();

    FileListWindow fileListWindow;
    ViewSourceWindow editorWindow;
    RunWindow runWindow;
    CompileWindow compileWindow(worker);
    fileListWindow.show();

    QObject::connect(&fileListWindow, SIGNAL(sourceSelected(QString)), &editorWindow, SLOT(show()));
    QObject::connect(&fileListWindow, SIGNAL(sourceSelected(QString)), &editorWindow, SLOT(loadFile(QString)));
    QObject::connect(&fileListWindow, SIGNAL(sourceSelected(QString)), &fileListWindow, SLOT(hide()));

    QObject::connect(&editorWindow, SIGNAL(navigatedBack()), &fileListWindow, SLOT(show()));
    QObject::connect(&editorWindow, SIGNAL(navigatedBack()), &editorWindow, SLOT(hide()));

    QObject::connect(&editorWindow, SIGNAL(runCode(QString const &)), &editorWindow, SLOT(hide()));
    QObject::connect(&editorWindow, SIGNAL(runCode(QString const &)), &compileWindow, SLOT(show()));
    QObject::connect(&editorWindow, SIGNAL(runCode(QString const &)), &compileWindow, SLOT(clear()));
    QObject::connect(&editorWindow, SIGNAL(runCode(QString const &)), &worker, SLOT(setSource(QString const &)));

    QObject::connect(&compileWindow, SIGNAL(navigatedBack()), &editorWindow, SLOT(show()));
    QObject::connect(&compileWindow, SIGNAL(navigatedBack()), &compileWindow, SLOT(hide()));
    QObject::connect(&worker, SIGNAL(compilationWillStart()), &compileWindow, SLOT(compileStarted()));
    QObject::connect(&worker, SIGNAL(compilationDidFinish()), &compileWindow, SLOT(compileFinished()));

    QObject::connect(&compileWindow, SIGNAL(runClicked()), &compileWindow, SLOT(hide()));
    QObject::connect(&compileWindow, SIGNAL(runClicked()), &runWindow, SLOT(show()));
    QObject::connect(&compileWindow, SIGNAL(runClicked()), &worker, SLOT(run()));

    QObject::connect(&runWindow, SIGNAL(navigatedBack()), &compileWindow, SLOT(show()));
    QObject::connect(&runWindow, SIGNAL(navigatedBack()), &runWindow, SLOT(hide()));
    QObject::connect(&worker, SIGNAL(runWillStart()), &runWindow, SLOT(runStarted()));
    QObject::connect(&worker, SIGNAL(runDidFinish()), &runWindow, SLOT(runFinished()));

    QObject::connect(&worker, SIGNAL(sourceChanged()), &worker, SLOT(compile()));
    QObject::connect(&worker, SIGNAL(compilerConsoleOutput(QString const &, int)), &compileWindow, SLOT(printString(QString const &, int)));
    QObject::connect(&worker, SIGNAL(runConsoleOutput(QString const &, int)), &runWindow, SLOT(printString(QString const &, int)));

    return a.exec();
}
开发者ID:rozetti,项目名称:0x0C0DE7AB,代码行数:80,代码来源:main.cpp


示例15: glfwWindowHint

bool RenderHub::init()
{
    //std::cout<<"----------------------------\n"
    //		<<"SPACE LION - Early Prototype\n"
    //		<<"----------------------------\n";
    //	Initialize GLFW
    if(!glfwInit())
    {
        std::cout<<"-----\n"
                 <<"The time is out of joint - O cursed spite,\n"
                 <<"That ever I was born to set it right!\n"
                 <<"-----\n"
                 <<"Error: Couldn't initialize glfw.";

        return false;
    }
    //std::cout<<"Initializing GLFW\n";

    //glfwWindowHint(GLFW_VERSION_MAJOR,3);
    //glfwWindowHint(GLFW_VERSION_MINOR,3);
    glfwWindowHint(GLFW_SAMPLES, 4);

    activeWindow = glfwCreateWindow(800,450,"Sea-Crossing",NULL,NULL);

    if(!activeWindow)
    {
        std::cout<<"-----\n"
                 <<"The time is out of joint - O cursed spite,\n"
                 <<"That ever I was born to set it right!\n"
                 <<"-----\n"
                 <<"Error: Couldn't open glfw window";

        glfwTerminate();
        return false;
    }

    glfwMakeContextCurrent(activeWindow);

    /*
    /	The callback function needs a reference to this object,
    /	so just hand it over and quietly weep in the corner.
    */
    setActiveInstance(this);
    glfwSetWindowSizeCallback(activeWindow,windowSizeCallback);
    glfwSetWindowCloseCallback(activeWindow,windowCloseCallback);
    Controls::setControlCallbacks(activeWindow);

    /*	Initialize glew */
    //glewExperimental = GL_TRUE;
    GLenum error = glewInit();
    if( GLEW_OK != error)
    {
        std::cout<<"-----\n"
                 <<"The time is out of joint - O cursed spite,\n"
                 <<"That ever I was born to set it right!\n"
                 <<"-----\n"
                 <<"Error: "<<glewGetErrorString(error);
        return false;
    }
    /*
    /	Apparently glweInit() causes a GL ERROR 1280, so let's just catch that...
    */
    glGetError();

    /*
    /	This is actually not supposed to be done like this!
    */
    addScene();
    setActiveScene(0);
    run();

    return true;
}
开发者ID:nireis,项目名称:sea-crossing,代码行数:73,代码来源:renderHub.cpp


示例16: main

int main(int argc, char *argv[]) {
	check_usage(argc);
	init(argv);
	run();
	return 0;
}
开发者ID:pratiksatapathy,项目名称:vEPC-handover-implementation,代码行数:6,代码来源:pgw_server.cpp


示例17: test_delete_container

void test_delete_container() {
  if (initialize_user(yarn_username, local_dirs)) {
    printf("FAIL: failed to initialize user %s\n", yarn_username);
    exit(1);
  }
  char* app_dir = get_app_directory(TEST_ROOT "/local-2", yarn_username, "app_1");
  char* dont_touch = get_app_directory(TEST_ROOT "/local-2", yarn_username, 
                                       DONT_TOUCH_FILE);
  char* container_dir = get_container_work_directory(TEST_ROOT "/local-2", 
					      yarn_username, "app_1", "container_1");
  char buffer[100000];
  sprintf(buffer, "mkdir -p %s/who/let/the/dogs/out/who/who", container_dir);
  run(buffer);
  sprintf(buffer, "touch %s", dont_touch);
  run(buffer);

  // soft link to the canary file from the container directory
  sprintf(buffer, "ln -s %s %s/who/softlink", dont_touch, container_dir);
  run(buffer);
  // hard link to the canary file from the container directory
  sprintf(buffer, "ln %s %s/who/hardlink", dont_touch, container_dir);
  run(buffer);
  // create a dot file in the container directory
  sprintf(buffer, "touch %s/who/let/.dotfile", container_dir);
  run(buffer);
  // create a no permission file
  sprintf(buffer, "touch %s/who/let/protect", container_dir);
  run(buffer);
  sprintf(buffer, "chmod 000 %s/who/let/protect", container_dir);
  run(buffer);
  // create a no permission directory
  sprintf(buffer, "chmod 000 %s/who/let", container_dir);
  run(buffer);

  // delete container directory
  char * dirs[] = {app_dir, 0};
  int ret = delete_as_user(yarn_username, "container_1" , dirs);
  if (ret != 0) {
    printf("FAIL: return code from delete_as_user is %d\n", ret);
    exit(1);
  }

  // check to make sure the container directory is gone
  if (access(container_dir, R_OK) == 0) {
    printf("FAIL: failed to delete the directory - %s\n", container_dir);
    exit(1);
  }
  // check to make sure the app directory is not gone
  if (access(app_dir, R_OK) != 0) {
    printf("FAIL: accidently deleted the directory - %s\n", app_dir);
    exit(1);
  }
  // but that the canary is not gone
  if (access(dont_touch, R_OK) != 0) {
    printf("FAIL: accidently deleted file %s\n", dont_touch);
    exit(1);
  }
  sprintf(buffer, "chmod -R 700 %s", app_dir);
  run(buffer);
  sprintf(buffer, "rm -fr %s", app_dir);
  run(buffer);
  free(app_dir);
  free(container_dir);
  free(dont_touch);
}
开发者ID:jiayuhan-it,项目名称:yarn-jyhtest,代码行数:65,代码来源:test-container-executor.c


示例18: main

int main(int argc, char *argv[]){
	run();
	return 0;
}
开发者ID:haroonhassan,项目名称:project_fox,代码行数:4,代码来源:playerdemo.c


示例19: qDebug

void UfrawWorker::developImpl(bool preview, WorkerBase *predecessor)
{
    qDebug() << "UfrawWorker::developImpl()" << this << predecessor;

    double progressPhaseA = 0.1;
    double progressPhaseB = 0.5;

    int nof = config()->settings()->getSetting(UfrawSettings::Fuse)->value().toInt();
    Magick::Image normalImg;
    std::vector<UfrawProcess>  ufraw(nof);
    int firstIdx = -(nof-1)/2;
    for( int i=0; i<nof; i++ )
    {
        setProgress( double(i) / nof * progressPhaseA );
        qDebug() << "UfrawWorker::developImpl() running" << i << "...";
        run( ufraw[i], preview, firstIdx+i, nof );
    }
    for( int i=0; i<nof; i++ )
    {
        setProgress( progressPhaseA + double(i) / nof * progressPhaseB );
        ufraw[i].waitForFinished(-1);
        qDebug() << "UfrawWorker::developImpl()" << i << "finished with exitcode" << ufraw[i].exitCode() << ":" << ufraw[i].console();
        if( ufraw[i].exitCode() == 0 )
        {
            bool isNormalExposed = (firstIdx+i)==0;
            bool isOverExposed   = (firstIdx+i)>0;
            qDebug() << "UfrawWorker::developImpl()" << i << "loading" << ufraw[i].output();
            Magick::Image img, mask;
            img.read( ufraw[i].output().toStdString().c_str() );
            if( isNormalExposed )
            {
                normalImg = img;
                normalImg.write( QString("/Users/manuel/tmp/test_normal.tif").toStdString().c_str() );
            }
            else
            {
                mask = masked( isOverExposed, 0.98, img );
                mask.write( ufraw[i].output().toStdString().c_str() );
                mask.write( QString("/Users/manuel/tmp/test_masked%1.tif").arg(i).toStdString().c_str() );
            }
        }
    }

    QStringList rawImages;
    for( int i=0; i<nof; i++ )
    {
        rawImages << ufraw[i].output();
    }

    if( nof > 1 )
    {
        double sigma = config()->settings()->getSetting(UfrawSettings::ExposureSigma)->value().toDouble();
        EnfuseProcess enfuse;
        enfuse.setProgram( m_enfusePath );
        enfuse.setInputs( rawImages );
        enfuse.setExposureSigma( sigma );
        connect( &enfuse, &EnfuseProcess::progress, [&](double progress) {
            setProgress( progressPhaseA + progressPhaseB + (1-progressPhaseA-progressPhaseB)*progress );
        });
        enfuse.run();
        enfuse.waitForFinished(-1);
        qDebug() << "UfrawWorker::developImpl() enfuse finished with exitcode" << enfuse.exitCode() << ":" << enfuse.console();
        if( enfuse.exitCode() == 0 )
        {
            qDebug() << "UfrawWorker::developImpl()" << "loading" << enfuse.output();
            m_img.read( enfuse.output().toStdString().c_str() );
            m_img.matte(false);
            qDebug() << "UfrawWorker::developImpl() fused" << m_img.format().c_str();
        }
    }
    else
    {
        m_img = normalImg;
    }
}
开发者ID:manuel-koch,项目名称:rawstack,代码行数:75,代码来源:ufrawworker.cpp


示例20: main

int
main(int argc, char *argv[]) {
    int i;

    progname = "dmenu";
    for(i = 1; i < argc; i++)
        /* single flags */
        if(!strcmp(argv[i], "-v") || !strcmp(argv[1], "--version")) {
            fputs("dmenu-"VERSION", © 2006-2011 dmenu engineers, see LICENSE for details\n", stdout);
            exit(EXIT_SUCCESS);
        }
        else if(!strcmp(argv[i], "-b") || !strcmp(argv[i], "--bottom"))
            topbar = False;
        else if(!strcmp(argv[i], "-e") || !strcmp(argv[i], "--echo"))
            message = True;
        else if(!strcmp(argv[i], "-ec") || !strcmp(argv[i], "--echo-centre"))
            message = True, messageposition = CENTRE;
        else if(!strcmp(argv[i], "-er") || !strcmp(argv[i], "--echo-right"))
            message = True, messageposition = RIGHT;
        else if(!strcmp(argv[i], "-i") || !strcmp(argv[i], "--insensitive"))
            fstrncmp = strncasecmp;
        else if(!strcmp(argv[i], "-r") || !strcmp(argv[i], "--return-early"))
            returnearly = True;
        else if(i==argc-1)
            usage();
    /* opts that need 1 arg */
        else if(!strcmp(argv[i], "-et") || !strcmp(argv[i], "--echo-timeout"))
            timeout = atoi(argv[++i]);
        else if(!strcmp(argv[i], "-h") || !strcmp(argv[i], "--height"))
            height = atoi(argv[++i]);
        else if(!strcmp(argv[i], "-l") || !strcmp(argv[i], "--lines"))
            lines = atoi(argv[++i]);
        else if(!strcmp(argv[i], "-m") || !strcmp(argv[i], "--monitor"))
            monitor = atoi(argv[++i]);
        else if(!strcmp(argv[i], "-p") || !strcmp(argv[i], "--prompt"))
            prompt = argv[++i];
        else if(!strcmp(argv[i], "-po") || !strcmp(argv[i], "--prompt-only"))
            prompt = argv[++i], nostdin = True;
        else if(!strcmp(argv[i], "-fn") || !strcmp(argv[i], "--font-name"))
            font = argv[++i];
        else if(!strcmp(argv[i], "-nb") || !strcmp(argv[i], "--normal-background"))
            normbgcolor = argv[++i];
        else if(!strcmp(argv[i], "-nf") || !strcmp(argv[i], "--normal-foreground"))
            normfgcolor = argv[++i];
        else if(!strcmp(argv[i], "-sb") || !strcmp(argv[i], "--selected-background"))
            selbgcolor = argv[++i];
        else if(!strcmp(argv[i], "-sf") || !strcmp(argv[i], "--selected-foreground"))
            selfgcolor = argv[++i];
        else
            usage();

    if(message) {
        signal(SIGALRM, alarmhandler);
        alarm(timeout);
    }

    dc = initdc();
    initfont(dc, font);
    if(!nostdin) {
        readstdin();
    }
    setup();
    run();

    return EXIT_FAILURE;  /* should not reach */
}
开发者ID:stilvoid,项目名称:dmenu,代码行数:66,代码来源:dmenu.c



注:本文中的run函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ runAction函数代码示例发布时间:2022-05-30
下一篇:
C++ rump_unschedule函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap