C++ rtw_hal_set_hwreg函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtw_hal_set_hwreg函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_hal_set_hwreg函数的具体用法？C++ rtw_hal_set_hwreg怎么用？C++ rtw_hal_set_hwreg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtw_hal_set_hwreg函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: _restore_network_status

static void _restore_network_status(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	WLAN_BSSID_EX	*pnetwork = (WLAN_BSSID_EX*)(&(pmlmeinfo->network));
	unsigned short	caps;
	u8	join_type;
#if 1

	//=======================================================
	// reset related register of Beacon control

	//set MSR to nolink
	Set_MSR(padapter, _HW_STATE_NOLINK_);
	// reject all data frame
	rtw_write16(padapter, REG_RXFLTMAP2,0x00);
	//reset TSF
	rtw_write8(padapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));

	// disable update TSF
	SetBcnCtrlReg(padapter, BIT(4), 0);

	//=======================================================
	rtw_joinbss_reset(padapter);
	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);
	//pmlmeinfo->assoc_AP_vendor = maxAP;

	if (padapter->registrypriv.wifi_spec) {
		// for WiFi test, follow WMM test plan spec
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F431C);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E541C);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x0000A525);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A549);

                // for WiFi test, mixed mode with intel STA under bg mode throughput issue
	        if (padapter->mlmepriv.htpriv.ht_option == 0)
		     rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00004320);

	} else {
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F3217);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E4317);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00105320);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A444);
	}

	//disable dynamic functions, such as high power, DIG
	//Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
#endif

	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress);
	join_type = 0;
	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));

	Set_MSR(padapter, (pmlmeinfo->state & 0x3));

	mlmeext_joinbss_event_callback(padapter, 1);
	//restore Sequence No.
	rtw_write8(padapter,0x4dc,padapter->xmitpriv.nqos_ssn);
}

开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:60，代码来源:rtl8723b_sreset.c

示例2: update_hw_ht_param

static void update_hw_ht_param(struct adapter *padapter)
{
	unsigned char		max_AMPDU_len;
	unsigned char		min_MPDU_spacing;
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &pmlmeext->mlmext_info;

	DBG_88E("%s\n", __func__);

	/* handle A-MPDU parameter field */
	/*
		ampdu_params_info [1:0]:Max AMPDU Len => 0:8k , 1:16k, 2:32k, 3:64k
		ampdu_params_info [4:2]:Min MPDU Start Spacing
	*/
	max_AMPDU_len = pmlmeinfo->HT_caps.ampdu_params_info & 0x03;

	min_MPDU_spacing = (pmlmeinfo->HT_caps.ampdu_params_info & 0x1c) >> 2;

	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_MIN_SPACE, (u8 *)(&min_MPDU_spacing));

	rtw_hal_set_hwreg(padapter, HW_VAR_AMPDU_FACTOR, (u8 *)(&max_AMPDU_len));

	/*  */
	/*  Config SM Power Save setting */
	/*  */
	pmlmeinfo->SM_PS = (le16_to_cpu(pmlmeinfo->HT_caps.cap_info) & 0x0C) >> 2;
	if (pmlmeinfo->SM_PS == WLAN_HT_CAP_SM_PS_STATIC)
		DBG_88E("%s(): WLAN_HT_CAP_SM_PS_STATIC\n", __func__);
}

开发者ID:austriancoder，项目名称:linux，代码行数:29，代码来源:rtw_ap.c

示例3: hal_init_macaddr

void hal_init_macaddr(_adapter *adapter)
{
	rtw_hal_set_hwreg(adapter, HW_VAR_MAC_ADDR, adapter->eeprompriv.mac_addr);
#ifdef  CONFIG_CONCURRENT_MODE
	if (adapter->pbuddy_adapter)
		rtw_hal_set_hwreg(adapter->pbuddy_adapter, HW_VAR_MAC_ADDR, adapter->pbuddy_adapter->eeprompriv.mac_addr);
#endif
}

开发者ID:abrakev，项目名称:RTL-8188C-8192C，代码行数:8，代码来源:hal_com.c

示例4: _restore_network_status

static void _restore_network_status(struct adapter *padapter)
{
	struct hal_data_8188e	*pHalData = GET_HAL_DATA(padapter);
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	struct wlan_bssid_ex	*pnetwork = (struct wlan_bssid_ex*)(&(pmlmeinfo->network));
	unsigned short	caps;
	u8	join_type;

	/*  */
	/*  reset related register of Beacon control */

	/* set MSR to nolink */
	Set_MSR(padapter, _HW_STATE_NOLINK_);
	/*  reject all data frame */
	rtw_write16(padapter, REG_RXFLTMAP2,0x00);
	/* reset TSF */
	rtw_write8(padapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));

	/*  disable update TSF */
	SetBcnCtrlReg(padapter, BIT(4), 0);

	/*  */
	rtw_joinbss_reset(padapter);
	set_channel_bwmode(padapter, pmlmeext->cur_channel, pmlmeext->cur_ch_offset, pmlmeext->cur_bwmode);

	if (padapter->registrypriv.wifi_spec) {
		/*  for WiFi test, follow WMM test plan spec */
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F431C);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E541C);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x0000A525);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A549);
		/*  for WiFi test, mixed mode with intel STA under bg mode throughput issue */
		if (padapter->mlmepriv.htpriv.ht_option == 0)
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00004320);

	} else {
		rtw_write32(padapter, REG_EDCA_VO_PARAM, 0x002F3217);
		rtw_write32(padapter, REG_EDCA_VI_PARAM, 0x005E4317);
		rtw_write32(padapter, REG_EDCA_BE_PARAM, 0x00105320);
		rtw_write32(padapter, REG_EDCA_BK_PARAM, 0x0000A444);
	}

	rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pmlmeinfo->network.MacAddress);
	join_type = 0;
	rtw_hal_set_hwreg(padapter, HW_VAR_MLME_JOIN, (u8 *)(&join_type));

	Set_MSR(padapter, (pmlmeinfo->state & 0x3));

	mlmeext_joinbss_event_callback(padapter, 1);
	/* restore Sequence No. */
	rtw_write8(padapter,0x4dc,padapter->xmitpriv.nqos_ssn);
}

开发者ID:simar7，项目名称:rtl8188eu，代码行数:53，代码来源:rtl8188e_sreset.c

示例5: rtw_set_ps_mode

void rtw_set_ps_mode(struct rtl_priv *rtlpriv, uint8_t ps_mode, uint8_t smart_ps, uint8_t bcn_ant_mode)
{
	struct pwrctrl_priv *pwrpriv = &rtlpriv->pwrctrlpriv;



	if (ps_mode > PM_Card_Disable) {
		return;
	}

	if (pwrpriv->pwr_mode == ps_mode) {
		if (PS_MODE_ACTIVE == ps_mode)
			return;

		if ((pwrpriv->smart_ps == smart_ps)
		   && (pwrpriv->bcn_ant_mode == bcn_ant_mode)) {
			return;
		}
	}

	//if(pwrpriv->pwr_mode == PS_MODE_ACTIVE)
	if(ps_mode == PS_MODE_ACTIVE)
	{
		{
			DBG_871X("rtw_set_ps_mode: Leave 802.11 power save\n");


			pwrpriv->pwr_mode = ps_mode;
			rtw_set_rpwm(rtlpriv, PS_STATE_S4);
			rtw_hal_set_hwreg(rtlpriv, HW_VAR_H2C_FW_PWRMODE, (uint8_t *)(&ps_mode));
			pwrpriv->fw_current_inpsmode = false;
		}
	} else 	{
		if (PS_RDY_CHECK(rtlpriv)) {
			DBG_871X("%s: Enter 802.11 power save\n", __FUNCTION__);


			pwrpriv->fw_current_inpsmode = true;
			pwrpriv->pwr_mode = ps_mode;
			pwrpriv->smart_ps = smart_ps;
			pwrpriv->bcn_ant_mode = bcn_ant_mode;
			rtw_hal_set_hwreg(rtlpriv, HW_VAR_H2C_FW_PWRMODE, (uint8_t *)(&ps_mode));

			rtw_set_rpwm(rtlpriv, PS_STATE_S2);
		}
	}


}

开发者ID:paralin，项目名称:rtl8821au-1，代码行数:49，代码来源:rtw_pwrctrl.c

示例6: rtw_set_ps_mode

void rtw_set_ps_mode(struct adapter *padapter, u8 ps_mode, u8 smart_ps, u8 bcn_ant_mode)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;

	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
		 ("%s: PowerMode=%d Smart_PS=%d\n",
		  __func__, ps_mode, smart_ps));

	if (ps_mode > PM_Card_Disable) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_, ("ps_mode:%d error\n", ps_mode));
		return;
	}

	if (pwrpriv->pwr_mode == ps_mode) {
		if (PS_MODE_ACTIVE == ps_mode)
			return;

		if ((pwrpriv->smart_ps == smart_ps) &&
		    (pwrpriv->bcn_ant_mode == bcn_ant_mode))
			return;
	}

	/* if (pwrpriv->pwr_mode == PS_MODE_ACTIVE) */
	if (ps_mode == PS_MODE_ACTIVE) {
		if (PS_RDY_CHECK(padapter)) {
			DBG_88E("%s: Enter 802.11 power save\n", __func__);
			pwrpriv->bFwCurrentInPSMode = true;
			pwrpriv->pwr_mode = ps_mode;
			pwrpriv->smart_ps = smart_ps;
			pwrpriv->bcn_ant_mode = bcn_ant_mode;
			rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_PWRMODE, (u8 *)(&ps_mode));
			rtw_set_rpwm(padapter, PS_STATE_S2);
		}
	}
}

开发者ID:020gzh，项目名称:linux，代码行数:35，代码来源:rtw_pwrctrl.c

示例7: rtw_btcoex_MediaStatusNotify

void rtw_btcoex_MediaStatusNotify(PADAPTER padapter, u8 mediaStatus)
{
#ifdef DBG_CONFIG_ERROR_RESET
    if (_TRUE == rtw_hal_sreset_inprogress(padapter))
    {
        DBG_8192C(FUNC_ADPT_FMT ": [BTCoex] under reset, skip notify!\n",
                  FUNC_ADPT_ARG(padapter));
        return;
    }
#endif // DBG_CONFIG_ERROR_RESET

#ifdef CONFIG_CONCURRENT_MODE
    if ((RT_MEDIA_DISCONNECT == mediaStatus) && (padapter->pbuddy_adapter))
    {
        PADAPTER pbuddy = padapter->pbuddy_adapter;
        if (check_fwstate(&pbuddy->mlmepriv, WIFI_ASOC_STATE) == _TRUE)
            return;
    }
#endif // CONFIG_CONCURRENT_MODE

    if ((RT_MEDIA_CONNECT == mediaStatus)
            && (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == _TRUE))
    {
        rtw_hal_set_hwreg(padapter, HW_VAR_DL_RSVD_PAGE, NULL);
    }

    hal_btcoex_MediaStatusNotify(padapter, mediaStatus);
}

开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:28，代码来源:rtw_btcoex.c

示例8: rtw_init_pwrctrl_priv

void rtw_init_pwrctrl_priv(PADAPTER padapter)
{
	struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(padapter);

	sema_init(&pwrctrlpriv->lock, 1);
	sema_init(&pwrctrlpriv->check_32k_lock, 1);
	pwrctrlpriv->rf_pwrstate = rf_on;
	pwrctrlpriv->ips_enter_cnts =0;
	pwrctrlpriv->ips_leave_cnts =0;
	pwrctrlpriv->bips_processing = false;

	pwrctrlpriv->ips_mode = padapter->registrypriv.ips_mode;
	pwrctrlpriv->ips_mode_req = padapter->registrypriv.ips_mode;

	pwrctrlpriv->pwr_state_check_interval = RTW_PWR_STATE_CHK_INTERVAL;
	pwrctrlpriv->pwr_state_check_cnts = 0;
	pwrctrlpriv->bInternalAutoSuspend = false;
	pwrctrlpriv->bInSuspend = false;
	pwrctrlpriv->bkeepfwalive = false;

	pwrctrlpriv->LpsIdleCount = 0;
	if (padapter->registrypriv.mp_mode == 1)
		pwrctrlpriv->power_mgnt =PS_MODE_ACTIVE ;
	else
		pwrctrlpriv->power_mgnt =padapter->registrypriv.power_mgnt;/*  PS_MODE_MIN; */
	pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?true:false;

	pwrctrlpriv->bFwCurrentInPSMode = false;

	pwrctrlpriv->rpwm = 0;
	pwrctrlpriv->cpwm = PS_STATE_S4;

	pwrctrlpriv->pwr_mode = PS_MODE_ACTIVE;
	pwrctrlpriv->smart_ps = padapter->registrypriv.smart_ps;
	pwrctrlpriv->bcn_ant_mode = 0;
	pwrctrlpriv->dtim = 0;

	pwrctrlpriv->tog = 0x80;

	rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&pwrctrlpriv->rpwm));

	_init_workitem(&pwrctrlpriv->cpwm_event, cpwm_event_callback, NULL);

	pwrctrlpriv->brpwmtimeout = false;
	_init_workitem(&pwrctrlpriv->rpwmtimeoutwi, rpwmtimeout_workitem_callback, NULL);
	_init_timer(&pwrctrlpriv->pwr_rpwm_timer, padapter->pnetdev, pwr_rpwm_timeout_handler, padapter);

	rtw_init_timer(&pwrctrlpriv->pwr_state_check_timer, padapter, pwr_state_check_handler);

	pwrctrlpriv->wowlan_mode = false;
	pwrctrlpriv->wowlan_ap_mode = false;

#ifdef CONFIG_PNO_SUPPORT
	pwrctrlpriv->pno_inited = false;
	pwrctrlpriv->pnlo_info = NULL;
	pwrctrlpriv->pscan_info = NULL;
	pwrctrlpriv->pno_ssid_list = NULL;
	pwrctrlpriv->pno_in_resume = true;
#endif
}

开发者ID:jasonabele，项目名称:rtl8723bs，代码行数:60，代码来源:rtw_pwrctrl.c

示例9: lps_ctrl_wk_hdl

static void lps_ctrl_wk_hdl(struct adapter *padapter, u8 lps_ctrl_type)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
	u8	mstatus;


	if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true) ||
	    (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == true))
		return;

	switch (lps_ctrl_type) {
	case LPS_CTRL_SCAN:
		if (check_fwstate(pmlmepriv, _FW_LINKED) == true) {
			/* connect */
			LPS_Leave(padapter);
		}
		break;
	case LPS_CTRL_JOINBSS:
		LPS_Leave(padapter);
		break;
	case LPS_CTRL_CONNECT:
		mstatus = 1;/* connect */
		/*  Reset LPS Setting */
		padapter->pwrctrlpriv.LpsIdleCount = 0;
		rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus));
		break;
	case LPS_CTRL_DISCONNECT:
		mstatus = 0;/* disconnect */
		LPS_Leave(padapter);
		rtw_hal_set_hwreg(padapter, HW_VAR_H2C_FW_JOINBSSRPT, (u8 *)(&mstatus));
		break;
	case LPS_CTRL_SPECIAL_PACKET:
		/* DBG_88E("LPS_CTRL_SPECIAL_PACKET\n"); */
		pwrpriv->DelayLPSLastTimeStamp = jiffies;
		LPS_Leave(padapter);
		break;
	case LPS_CTRL_LEAVE:
		LPS_Leave(padapter);
		break;
	default:
		break;
	}

}

开发者ID:020gzh，项目名称:linux，代码行数:45，代码来源:rtw_cmd.c

示例10: rtw_btcoex_MediaStatusNotify

void rtw_btcoex_MediaStatusNotify(struct adapter *padapter, u8 mediaStatus)
{
	if ((mediaStatus == RT_MEDIA_CONNECT)
		&& (check_fwstate(&padapter->mlmepriv, WIFI_AP_STATE) == true)) {
		rtw_hal_set_hwreg(padapter, HW_VAR_DL_RSVD_PAGE, NULL);
	}

	hal_btcoex_MediaStatusNotify(padapter, mediaStatus);
}

开发者ID:mkrufky，项目名称:linux，代码行数:9，代码来源:rtw_btcoex.c

示例11: sreset_restore_security_station

void sreset_restore_security_station(_adapter *padapter)
{
	u8 EntryId = 0;
	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
	struct sta_priv * pstapriv = &padapter->stapriv;
	struct sta_info *psta;
	struct security_priv* psecuritypriv=&(padapter->securitypriv);
	struct mlme_ext_info	*pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;

	{
		u8 val8;

		if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X) {
			val8 = 0xcc;
		#ifdef CONFIG_WAPI_SUPPORT
		} else if (padapter->wapiInfo.bWapiEnable && pmlmeinfo->auth_algo == dot11AuthAlgrthm_WAPI) {
			//Disable TxUseDefaultKey, RxUseDefaultKey, RxBroadcastUseDefaultKey.
			val8 = 0x4c;
		#endif
		} else {
			val8 = 0xcf;
		}
		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
	}

	#if 0
	if (	( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP40_ ) ||
		( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP104_ ))
	{

		for(EntryId=0; EntryId<4; EntryId++)
		{
			if(EntryId == psecuritypriv->dot11PrivacyKeyIndex)
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 1);
			else
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 0);
		}

	}
	else
	#endif
	if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) ||
		(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_))
	{
		psta = rtw_get_stainfo(pstapriv, get_bssid(mlmepriv));
		if (psta == NULL) {
			//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
		}
		else
		{
			//pairwise key
			rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
			//group key
			rtw_set_key(padapter,&padapter->securitypriv,padapter->securitypriv.dot118021XGrpKeyid, 0);
		}
	}
}

开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:57，代码来源:rtw_sreset.c

示例12: rtw_ips_dev_unload

void rtw_ips_dev_unload(struct adapter *padapter)
{
	DBG_88E("====> %s...\n", __func__);

	rtw_hal_set_hwreg(padapter, HW_VAR_FIFO_CLEARN_UP, NULL);

	usb_intf_stop(padapter);

	/* s5. */
	if (!padapter->bSurpriseRemoved)
		rtw_hal_deinit(padapter);
}

开发者ID:Lyude，项目名称:linux，代码行数:12，代码来源:os_intfs.c

示例13: rtw_set_rpwm

/*
 *
 * Parameters
 *	padapter
 *	pslv			power state level, only could be PS_STATE_S0 ~ PS_STATE_S4
 *
 */
void rtw_set_rpwm(struct adapter *padapter, u8 pslv)
{
	u8	rpwm;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;

	pslv = PS_STATE(pslv);

	if (pwrpriv->btcoex_rfon) {
		if (pslv < PS_STATE_S4)
			pslv = PS_STATE_S3;
	}

	if ((pwrpriv->rpwm == pslv)) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
			 ("%s: Already set rpwm[0x%02X], new=0x%02X!\n", __func__, pwrpriv->rpwm, pslv));
		return;
	}

	if ((padapter->bSurpriseRemoved) ||
	    (!padapter->hw_init_completed)) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
			 ("%s: SurpriseRemoved(%d) hw_init_completed(%d)\n",
			 __func__, padapter->bSurpriseRemoved, padapter->hw_init_completed));

		pwrpriv->cpwm = PS_STATE_S4;

		return;
	}

	if (padapter->bDriverStopped) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
			 ("%s: change power state(0x%02X) when DriverStopped\n", __func__, pslv));

		if (pslv < PS_STATE_S2) {
			RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
				 ("%s: Reject to enter PS_STATE(0x%02X) lower than S2 when DriverStopped!!\n", __func__, pslv));
			return;
		}
	}

	rpwm = pslv | pwrpriv->tog;
	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
		 ("rtw_set_rpwm: rpwm=0x%02x cpwm=0x%02x\n", rpwm, pwrpriv->cpwm));

	pwrpriv->rpwm = pslv;

	rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&rpwm));

	pwrpriv->tog += 0x80;
	pwrpriv->cpwm = pslv;
}

开发者ID:020gzh，项目名称:linux，代码行数:58，代码来源:rtw_pwrctrl.c

示例14: rtw_hal_macid_sleep

s32 rtw_hal_macid_sleep(PADAPTER padapter, u32 macid)
{
	u8 support;


	support = false;
	rtw_hal_get_def_var(padapter, HAL_DEF_MACID_SLEEP, &support);
	if (false == support)
		return _FAIL;

	rtw_hal_set_hwreg(padapter, HW_VAR_MACID_SLEEP, (u8*)&macid);

	return _SUCCESS;
}

开发者ID:jhartma，项目名称:rtl8723bs，代码行数:14，代码来源:hal_intf.c

示例15: rtw_hal_macid_wakeup

s32 rtw_hal_macid_wakeup(PADAPTER padapter, u32 macid)
{
	u8 support;


	support = _FALSE;
	rtw_hal_get_def_var(padapter, HAL_DEF_MACID_SLEEP, &support);
	if (_FALSE == support)
		return _FAIL;

	rtw_hal_set_hwreg(padapter, HW_VAR_MACID_WAKEUP, (u8*)&macid);

	return _SUCCESS;
}

开发者ID:austinmarton，项目名称:rtl8812au_linux，代码行数:14，代码来源:hal_intf.c

示例16: rtw_hal_macid_wakeup

s32 rtw_hal_macid_wakeup(struct adapter *padapter, u32 macid)
{
	u8 support;


	support = false;
	rtw_hal_get_def_var(padapter, HAL_DEF_MACID_SLEEP, &support);
	if (false == support)
		return _FAIL;

	rtw_hal_set_hwreg(padapter, HW_VAR_MACID_WAKEUP, (u8 *)&macid);

	return _SUCCESS;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:14，代码来源:hal_intf.c

示例17: rtw_ips_dev_unload

void rtw_ips_dev_unload(struct rtl_priv *rtlpriv)
{
	struct net_device *ndev = (struct net_device *) rtlpriv->ndev;
	struct xmit_priv	*pxmitpriv = &(rtlpriv->xmitpriv);

	DBG_871X("====> %s...\n", __FUNCTION__);

	rtw_hal_set_hwreg(rtlpriv, HW_VAR_FIFO_CLEARN_UP, 0);

	if (rtlpriv->intf_stop) {
		rtlpriv->intf_stop(rtlpriv);
	}

	/* s5. */
	if (rtlpriv->bSurpriseRemoved == _FALSE) {
		rtw_hal_deinit(rtlpriv);
	}

}

开发者ID:directhex，项目名称:rtl8821au-dkms，代码行数:19，代码来源:os_intfs.c

示例18: rtw_set_rpwm

/*
 *
 * Parameters
 *	padapter
 *	pslv			power state level, only could be PS_STATE_S0 ~ PS_STATE_S4
 *
 */
void rtw_set_rpwm(PADAPTER padapter, u8 pslv)
{
	u8	rpwm;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;

_func_enter_;

	pslv = PS_STATE(pslv);

	if (pwrpriv->rpwm == pslv) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_,_drv_err_,
			("%s: Already set rpwm[0x%02x]!\n", __FUNCTION__, pslv));
		return;
	}

	if ((padapter->bDriverStopped == _TRUE) ||
		(padapter->bSurpriseRemoved == _TRUE)) {
		RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_err_,
				 ("%s: bDriverStopped(%d) bSurpriseRemoved(%d)\n",
				  __FUNCTION__, padapter->bDriverStopped, padapter->bSurpriseRemoved));
		return;
	}

	rpwm = pslv | pwrpriv->tog;
#ifdef CONFIG_LPS_LCLK
	if ((pwrpriv->cpwm < PS_STATE_S2) && (pslv >= PS_STATE_S2))
		rpwm |= PS_ACK;
#endif
	RT_TRACE(_module_rtl871x_pwrctrl_c_, _drv_notice_,
			 ("rtw_set_rpwm: rpwm=0x%02x cpwm=0x%02x\n", rpwm, pwrpriv->cpwm));

	pwrpriv->rpwm = pslv;

	rtw_hal_set_hwreg(padapter, HW_VAR_SET_RPWM, (u8 *)(&rpwm));

	pwrpriv->tog += 0x80;

	if (!(rpwm & PS_ACK)) pwrpriv->cpwm = pslv;

_func_exit_;
}

开发者ID:lwfinger，项目名称:rtl8192cu，代码行数:48，代码来源:rtw_pwrctrl.c

示例19: rtw_hal_macid_wakeup

s32 rtw_hal_macid_wakeup(PADAPTER padapter, u8 macid)
{
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
	struct macid_ctl_t *macid_ctl = dvobj_to_macidctl(dvobj);
	u8 support;

	support = _FALSE;
	rtw_hal_get_def_var(padapter, HAL_DEF_MACID_SLEEP, &support);
	if (_FALSE == support)
		return _FAIL;

	if (macid >= macid_ctl->num) {
		DBG_871X_LEVEL(_drv_err_, FUNC_ADPT_FMT": Invalid macid(%u)\n",
			FUNC_ADPT_ARG(padapter), macid);
		return _FAIL;
	}

	rtw_hal_set_hwreg(padapter, HW_VAR_MACID_WAKEUP, &macid);

	return _SUCCESS;
}

开发者ID:rcd765，项目名称:rtl8723bs_intel_compute_stick，代码行数:21，代码来源:hal_intf.c

示例20: antenna_select_wk_hdl

static void antenna_select_wk_hdl(struct adapter *padapter, u8 antenna)
{
	rtw_hal_set_hwreg(padapter, HW_VAR_ANTENNA_DIVERSITY_SELECT, (u8 *)(&antenna));
}

开发者ID:020gzh，项目名称:linux，代码行数:4，代码来源:rtw_cmd.c

注：本文中的rtw_hal_set_hwreg函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtw_indicate_disconnect函数代码示例发布时间：2022-05-30

C++ rtw_get_stainfo函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtw_hal_set_hwreg函数代码示例

示例1: _restore_network_status

示例2: update_hw_ht_param

示例3: hal_init_macaddr

示例4: _restore_network_status

示例5: rtw_set_ps_mode

示例6: rtw_set_ps_mode

示例7: rtw_btcoex_MediaStatusNotify

示例8: rtw_init_pwrctrl_priv

示例9: lps_ctrl_wk_hdl

示例10: rtw_btcoex_MediaStatusNotify

示例11: sreset_restore_security_station

示例12: rtw_ips_dev_unload

示例13: rtw_set_rpwm

示例14: rtw_hal_macid_sleep

示例15: rtw_hal_macid_wakeup

示例16: rtw_hal_macid_wakeup

示例17: rtw_ips_dev_unload

示例18: rtw_set_rpwm

示例19: rtw_hal_macid_wakeup

示例20: antenna_select_wk_hdl

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053