C++ rtw_free_assoc_resources函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtw_free_assoc_resources函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_free_assoc_resources函数的具体用法？C++ rtw_free_assoc_resources怎么用？C++ rtw_free_assoc_resources使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtw_free_assoc_resources函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtw_set_802_11_disassociate

u8 rtw_set_802_11_disassociate(_adapter *padapter)
{
	_irqL irqL;
	struct mlme_priv * pmlmepriv = &padapter->mlmepriv;

_func_enter_;

	_enter_critical_bh(&pmlmepriv->lock, &irqL);

	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("MgntActrtw_set_802_11_disassociate: rtw_indicate_disconnect\n"));

		rtw_disassoc_cmd(padapter, 0, _TRUE);
		rtw_indicate_disconnect(padapter);
		rtw_free_assoc_resources(padapter, 1);
		rtw_pwr_wakeup(padapter);
	}

	_exit_critical_bh(&pmlmepriv->lock, &irqL);

_func_exit_;

	return _TRUE;
}

开发者ID:zefie，项目名称:nxt_andx86_kernel，代码行数:25，代码来源:rtw_ioctl_set.c

示例2: netdev_close

static int netdev_close(struct net_device *pnetdev)
{
	_adapter *padapter = (_adapter *)netdev_priv(pnetdev);
		
	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+871x_drv - drv_close\n"));	

	if(padapter->pwrctrlpriv.bInternalAutoSuspend == _TRUE)
	{
		rfpwrstate_check(padapter);
	}

	padapter->net_closed = _TRUE;
/*	if(!padapter->hw_init_completed)
	{
		printk("(1)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", padapter->bup, padapter->hw_init_completed);

	padapter->bDriverStopped = _TRUE;   

	rtw_dev_unload(padapter);	
	}
	else*/
	{
		printk("(2)8192cu_drv - drv_close, bup=%d, hw_init_completed=%d\n"
			, padapter->bup
			, padapter->hw_init_completed);

		//s1.
		if(pnetdev)   
     		{
			if (!netif_queue_stopped(pnetdev))
				netif_stop_queue(pnetdev);
     		}
		
#ifndef CONFIG_PLATFORM_ANDROID	
		
		//s2.	
		//s2-1.  issue rtw_disassoc_cmd to fw
		rtw_disassoc_cmd(padapter);	
		//s2-2.  indicate disconnect to os
		rtw_indicate_disconnect(padapter);
		//s2-3. 
	       rtw_free_assoc_resources(padapter);	
		//s2-4.
		rtw_free_network_queue(padapter,_TRUE);	
#endif

	}

	// Close LED
	padapter->ledpriv.LedControlHandler(padapter, LED_CTL_POWER_OFF);

	RT_TRACE(_module_os_intfs_c_,_drv_info_,("-871x_drv - drv_close\n"));
	printk("-871x_drv - drv_close, bup=%d\n", padapter->bup);
	   
	return 0;
	
}

开发者ID:FFTEAM，项目名称:open-duckbox-project-sh4-pingulux-git，代码行数:57，代码来源:os_intfs.c

示例3: netdev_close

int netdev_close(struct net_device *ndev)
{
	struct rtl_priv *rtlpriv = rtl_priv(ndev);
	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);	

	if (rtlpriv->pwrctrlpriv.bInternalAutoSuspend == _TRUE) {
		/*rtw_pwr_wakeup(rtlpriv); */
		if (rtlpriv->pwrctrlpriv.rf_pwrstate == rf_off)
			rtlpriv->pwrctrlpriv.ps_flag = _TRUE;
	}
	rtlpriv->net_closed = _TRUE;

/*	if (!rtlpriv->hw_init_completed)
	{
		DBG_871X("(1)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", rtlpriv->bup, rtlpriv->hw_init_completed);

		rtlpriv->bDriverStopped = _TRUE;

		rtw_dev_unload(rtlpriv);
	}
	else*/
	if (rtlpriv->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_871X("(2)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", rtlpriv->bup, rtlpriv->hw_init_completed);

		/* s1. */
		if (ndev) {
			if (!rtw_netif_queue_stopped(ndev))
				rtw_netif_stop_queue(ndev);
		}

		/* s2. */
		LeaveAllPowerSaveMode(rtlpriv);
		rtw_disassoc_cmd(rtlpriv, 500, _FALSE);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect(rtlpriv);
		/* s2-3. */
		rtw_free_assoc_resources(rtlpriv, 1);
		/* s2-4. */
		rtw_free_network_queue(rtlpriv, _TRUE);
		/* Close LED */
		rtw_hal_led_control(rtlpriv, LED_CTL_POWER_OFF);
	}

	kfree(rtlhal->pfirmware);
	rtlhal->pfirmware = NULL;

	DBG_871X("-871x_drv - drv_close, bup=%d\n", rtlpriv->bup);

	return 0;

}

开发者ID:directhex，项目名称:rtl8821au-dkms，代码行数:51，代码来源:os_intfs.c

示例4: netdev_close

int netdev_close(struct net_device *pnetdev)
{
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(pnetdev);
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+88eu_drv - drv_close\n"));

	if (padapter->pwrctrlpriv.bInternalAutoSuspend) {
		if (padapter->pwrctrlpriv.rf_pwrstate == rf_off)
			padapter->pwrctrlpriv.ps_flag = true;
	}
	padapter->net_closed = true;

	if (padapter->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_88E("(2)88eu_drv - drv_close, bup =%d, hw_init_completed =%d\n",
			padapter->bup, padapter->hw_init_completed);

		/* s1. */
		if (pnetdev) {
			if (!rtw_netif_queue_stopped(pnetdev))
				rtw_netif_stop_queue(pnetdev);
		}

		/* s2. */
		LeaveAllPowerSaveMode(padapter);
		rtw_disassoc_cmd(padapter, 500, false);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect(padapter);
		/* s2-3. */
		rtw_free_assoc_resources(padapter, 1);
		/* s2-4. */
		rtw_free_network_queue(padapter, true);
		/*  Close LED */
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
	}

	nat25_db_cleanup(padapter);

#ifdef CONFIG_88EU_P2P
	rtw_p2p_enable(padapter, P2P_ROLE_DISABLE);
#endif /* CONFIG_88EU_P2P */

	kfree(dvobj->firmware.szFwBuffer);
	dvobj->firmware.szFwBuffer = NULL;

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-88eu_drv - drv_close\n"));
	DBG_88E("-88eu_drv - drv_close, bup =%d\n", padapter->bup);
	return 0;
}

开发者ID:arm13，项目名称:rtl8188eu，代码行数:49，代码来源:os_intfs.c

示例5: netdev_close

int netdev_close(struct net_device *pnetdev)
{
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(pnetdev);
	struct hal_data_8188e *rtlhal = GET_HAL_DATA(padapter);

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+88eu_drv - drv_close\n"));

	if (padapter->pwrctrlpriv.bInternalAutoSuspend) {
		if (padapter->pwrctrlpriv.rf_pwrstate == rf_off)
			padapter->pwrctrlpriv.ps_flag = true;
	}
	padapter->net_closed = true;

	if (padapter->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_88E("(2)88eu_drv - drv_close, bup =%d, hw_init_completed =%d\n",
			padapter->bup, padapter->hw_init_completed);

		/* s1. */
		if (pnetdev) {
			if (!rtw_netif_queue_stopped(pnetdev))
				netif_tx_stop_all_queues(pnetdev);
		}

		/* s2. */
		LeaveAllPowerSaveMode(padapter);
		rtw_disassoc_cmd(padapter, 500, false);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect(padapter);
		/* s2-3. */
		rtw_free_assoc_resources(padapter, 1);
		/* s2-4. */
		rtw_free_network_queue(padapter, true);
		/*  Close LED */
		rtw_led_control(padapter, LED_CTL_POWER_OFF);
	}

	kfree(rtlhal->pfirmware);
	rtlhal->pfirmware = NULL;

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-88eu_drv - drv_close\n"));
	DBG_88E("-88eu_drv - drv_close, bup =%d\n", padapter->bup);
	return 0;
}

开发者ID:383530895，项目名称:linux，代码行数:43，代码来源:os_intfs.c

示例6: rtw_set_802_11_disassociate

u8 rtw_set_802_11_disassociate(struct adapter *padapter)
{
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;

	spin_lock_bh(&pmlmepriv->lock);

	if (check_fwstate(pmlmepriv, _FW_LINKED)) {
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_,
			 ("MgntActrtw_set_802_11_disassociate: rtw_indicate_disconnect\n"));

		rtw_disassoc_cmd(padapter, 0, true);
		rtw_indicate_disconnect(padapter);
		rtw_free_assoc_resources(padapter, 1);
		rtw_pwr_wakeup(padapter);
	}

	spin_unlock_bh(&pmlmepriv->lock);

	return true;
}

开发者ID:Igoretc，项目名称:rtl8188eu，代码行数:20，代码来源:rtw_ioctl_set.c

示例7: rtw_set_802_11_disassociate

uint8_t rtw_set_802_11_disassociate(struct rtl_priv *rtlpriv)
{
	struct mlme_priv * pmlmepriv = &rtlpriv->mlmepriv;



	spin_lock_bh(&pmlmepriv->lock);

	if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
	{
		rtw_disassoc_cmd(rtlpriv, 0, _TRUE);
		rtw_indicate_disconnect(rtlpriv);
		rtw_free_assoc_resources(rtlpriv, 1);
		rtw_pwr_wakeup(rtlpriv);
	}

	spin_unlock_bh(&pmlmepriv->lock);



	return _TRUE;
}

开发者ID:ssurba，项目名称:rtl8821au，代码行数:22，代码来源:rtw_ioctl_set.c

示例8: rtw_set_802_11_infrastructure_mode

/*
rtw_set_802_11_infrastructure_mode(~)
	### NOTE:#### (!!!!)
	MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock and scanned_queue->lock in sequence
*/
u8 rtw_set_802_11_infrastructure_mode(_adapter* padapter, 
	NDIS_802_11_NETWORK_INFRASTRUCTURE networktype)
{
	_irqL irqL;
	struct	mlme_priv	*pmlmepriv = &padapter->mlmepriv;
	struct	wlan_network	*cur_network = &pmlmepriv->cur_network;
	NDIS_802_11_NETWORK_INFRASTRUCTURE* pold_state = &(cur_network->network.InfrastructureMode);
	
_func_enter_;

	RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_notice_,
		 ("+rtw_set_802_11_infrastructure_mode: old=%d new=%d fw_state=0x%08x\n",
		  *pold_state, networktype, get_fwstate(pmlmepriv)));
	
	if(*pold_state != networktype)
	{
		
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,(" change mode!"));
		//DBG_871X("change mode, old_mode=%d, new_mode=%d, fw_state=0x%x\n", *pold_state, networktype, get_fwstate(pmlmepriv));

		if(*pold_state==Ndis802_11APMode)
		{		
			//change to other mode from Ndis802_11APMode			
			cur_network->join_res = -1;
			
#ifdef CONFIG_NATIVEAP_MLME
			stop_ap_mode(padapter);
#endif
		}	

		if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||(*pold_state==Ndis802_11IBSS))
			rtw_disassoc_cmd(padapter, 0, _TRUE);

		if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||
			(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)== _TRUE) )
			rtw_free_assoc_resources(padapter, 0);

		if((*pold_state == Ndis802_11Infrastructure) ||(*pold_state == Ndis802_11IBSS))
	       {
			if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
			{		
				rtw_indicate_disconnect(padapter); //will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not
			}
	       }

		*pold_state = networktype;

		_clr_fwstate_(pmlmepriv, ~WIFI_NULL_STATE);
				
		switch(networktype)
		{
			case Ndis802_11IBSS:
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
				break;
				
			case Ndis802_11Infrastructure:
				set_fwstate(pmlmepriv, WIFI_STATION_STATE);
				break;
				
			case Ndis802_11APMode:
				set_fwstate(pmlmepriv, WIFI_AP_STATE);
#ifdef CONFIG_NATIVEAP_MLME
				start_ap_mode(padapter);
				//rtw_indicate_connect(padapter);
#endif				
				
				break;

			case Ndis802_11AutoUnknown:
			case Ndis802_11InfrastructureMax:
				break;                        				
		}

		//SecClearAllKeys(adapter);
		
		//RT_TRACE(COMP_OID_SET, DBG_LOUD, ("set_infrastructure: fw_state:%x after changing mode\n",
		//									get_fwstate(pmlmepriv) ));

	}

_func_exit_;

	return _TRUE;
}

开发者ID:digetx，项目名称:rtl8192cu-fixes，代码行数:89，代码来源:rtw_ioctl_set.c

示例9: rtw_set_802_11_ssid

u8 rtw_set_802_11_ssid(_adapter* padapter, NDIS_802_11_SSID *ssid)
{	
	_irqL irqL;
	u8 status = _SUCCESS;
	u32 cur_time = 0;

	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct wlan_network *pnetwork = &pmlmepriv->cur_network;
	
_func_enter_;
	
	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
		 ("+rtw_set_802_11_ssid: ssid=[%s] fw_state=0x%08x\n",
		  ssid->Ssid, get_fwstate(pmlmepriv)));

	if(padapter->hw_init_completed==_FALSE){
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
			 ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n"));
		status = _FAIL;
		goto exit;
	}
		
	_enter_critical_bh(&pmlmepriv->lock, &irqL);

	DBG_871X("Set SSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {	
		goto handle_tkip_countermeasure;
	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
		goto release_mlme_lock;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_,
			 ("set_ssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));

		if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) &&
		    (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == _TRUE))
		{			
			if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE))
			{
				RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
					 ("Set SSID is the same ssid, fw_state=0x%08x\n",
					  get_fwstate(pmlmepriv)));

				if(rtw_is_same_ibss(padapter, pnetwork) == _FALSE)
				{				
					//if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again
					rtw_disassoc_cmd(padapter, 0, _TRUE);

					if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
						rtw_indicate_disconnect(padapter);
						
					rtw_free_assoc_resources(padapter, 1);

					if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
						_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
						set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
					}
				}
				else
				{
					goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
				}
			}
#ifdef CONFIG_LPS
			else {
				rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1);
			}
#endif
		}
		else
		{
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set SSID not the same ssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_ssid=[%s] len=0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("assoc_ssid=[%s] len=0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength));

			rtw_disassoc_cmd(padapter, 0, _TRUE);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(padapter);
			
			rtw_free_assoc_resources(padapter, 1);

			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}		
	}

handle_tkip_countermeasure:
	if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) {
		status = _FAIL;
		goto release_mlme_lock;
	}

	if (rtw_validate_ssid(ssid) == _FALSE) {
		status = _FAIL;
		goto release_mlme_lock;
//.........这里部分代码省略.........

开发者ID:digetx，项目名称:rtl8192cu-fixes，代码行数:101，代码来源:rtw_ioctl_set.c

示例10: rtw_set_802_11_bssid

u8 rtw_set_802_11_bssid(_adapter* padapter, u8 *bssid)
{	
	_irqL irqL;	
	u8 status=_SUCCESS;
	u32 cur_time = 0;

	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	
_func_enter_;
	
	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
		 ("+rtw_set_802_11_bssid: bssid="MAC_FMT"\n", MAC_ARG(bssid) ));

	if ((bssid[0]==0x00 && bssid[1]==0x00 && bssid[2]==0x00 && bssid[3]==0x00 && bssid[4]==0x00 &&bssid[5]==0x00) ||
	    (bssid[0]==0xFF && bssid[1]==0xFF && bssid[2]==0xFF && bssid[3]==0xFF && bssid[4]==0xFF &&bssid[5]==0xFF))
	{
		status = _FAIL;
		goto exit;
	}
		
	_enter_critical_bh(&pmlmepriv->lock, &irqL);


	DBG_871X("Set BSSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		goto handle_tkip_countermeasure;
	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
		goto release_mlme_lock;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("set_bssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));

		if (_rtw_memcmp(&pmlmepriv->cur_network.network.MacAddress, bssid, ETH_ALEN) == _TRUE)
		{		
			if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE)
				goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
		} else {
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set BSSID not the same bssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_bssid="MAC_FMT"\n", MAC_ARG(bssid) ));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("cur_bssid="MAC_FMT"\n", MAC_ARG(pmlmepriv->cur_network.network.MacAddress) ));

			rtw_disassoc_cmd(padapter, 0, _TRUE);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(padapter);

			rtw_free_assoc_resources(padapter, 1);

			if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}		
		}
	}

handle_tkip_countermeasure:
	if (rtw_handle_tkip_countermeasure(padapter, __func__) == _FAIL) {
		status = _FAIL;
		goto release_mlme_lock;
	}

	_rtw_memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN);
	pmlmepriv->assoc_by_bssid=_TRUE;

	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		pmlmepriv->to_join = _TRUE;	
	}
	else {
		status = rtw_do_join(padapter);
	}

release_mlme_lock:
	_exit_critical_bh(&pmlmepriv->lock, &irqL);
		
exit:
	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
		("rtw_set_802_11_bssid: status=%d\n", status));
	
_func_exit_;

	return status;
}

开发者ID:digetx，项目名称:rtl8192cu-fixes，代码行数:84，代码来源:rtw_ioctl_set.c

示例11: rtw_set_802_11_ssid

u8 rtw_set_802_11_ssid(_adapter* padapter, NDIS_802_11_SSID *ssid)
{	
	_irqL irqL;
	u8 status = _SUCCESS;
	u32 cur_time = 0;

	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct wlan_network *pnetwork = &pmlmepriv->cur_network;
	
_func_enter_;
	
	DBG_871X_LEVEL(_drv_always_, "set ssid [%s] fw_state=0x%08x\n",
		       	ssid->Ssid, get_fwstate(pmlmepriv));

	if(padapter->hw_init_completed==_FALSE){
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
			 ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n"));
		status = _FAIL;
		goto exit;
	}
		
	_enter_critical_bh(&pmlmepriv->lock, &irqL);

	DBG_871X("Set SSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {	
		goto handle_tkip_countermeasure;
	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
		goto release_mlme_lock;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_,
			 ("set_ssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));

		if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) &&
		    (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == _TRUE))
		{			
			if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE))
			{
				RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
					 ("Set SSID is the same ssid, fw_state=0x%08x\n",
					  get_fwstate(pmlmepriv)));

				if(rtw_is_same_ibss(padapter, pnetwork) == _FALSE)
				{				
					//if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again
					rtw_disassoc_cmd(padapter);

					if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
						rtw_indicate_disconnect(padapter);
						
					rtw_free_assoc_resources(padapter, 1);

					if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
						_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
						set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
					}
				}
				else
				{
					goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
				}
			}
#ifdef CONFIG_LPS
			else {
				rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1);
			}
#endif
		}
		else
		{
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set SSID not the same ssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_ssid=[%s] len=0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("assoc_ssid=[%s] len=0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength));

			rtw_disassoc_cmd(padapter);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(padapter);
			
			rtw_free_assoc_resources(padapter, 1);

			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}		
	}

handle_tkip_countermeasure:
#ifdef PLATFORM_WINDOWS
	if (padapter->securitypriv.btkip_countermeasure==_TRUE)
	{
		LARGE_INTEGER	sys_time;
		u32  diff_time,cur_time ;
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:padapter->securitypriv.btkip_countermeasure==_TRUE\n"));
		NdisGetCurrentSystemTime(&sys_time);	
		cur_time=(u32)(sys_time.QuadPart/10);  // In micro-second.
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:cur_time=0x%x\n",cur_time));
//.........这里部分代码省略.........

开发者ID:pocketbook，项目名称:U7，代码行数:101，代码来源:rtw_ioctl_set.c

示例12: rtw_set_802_11_infrastructure_mode

u8 rtw_set_802_11_infrastructure_mode(struct adapter *padapter,
	enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype)
{
	struct	mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct	wlan_network	*cur_network = &pmlmepriv->cur_network;
	enum NDIS_802_11_NETWORK_INFRASTRUCTURE *pold_state = &(cur_network->network.InfrastructureMode);

	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
		 ("+rtw_set_802_11_infrastructure_mode: old =%d new =%d fw_state = 0x%08x\n",
		  *pold_state, networktype, get_fwstate(pmlmepriv)));

	if (*pold_state != networktype) {
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, (" change mode!"));
		/* DBG_871X("change mode, old_mode =%d, new_mode =%d, fw_state = 0x%x\n", *pold_state, networktype, get_fwstate(pmlmepriv)); */

		if (*pold_state == Ndis802_11APMode) {
			/* change to other mode from Ndis802_11APMode */
			cur_network->join_res = -1;

			stop_ap_mode(padapter);
		}

		spin_lock_bh(&pmlmepriv->lock);

		if ((check_fwstate(pmlmepriv, _FW_LINKED) == true) || (*pold_state == Ndis802_11IBSS))
			rtw_disassoc_cmd(padapter, 0, true);

		if ((check_fwstate(pmlmepriv, _FW_LINKED) == true) ||
			(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true))
			rtw_free_assoc_resources(padapter, 1);

		if ((*pold_state == Ndis802_11Infrastructure) || (*pold_state == Ndis802_11IBSS)) {
			if (check_fwstate(pmlmepriv, _FW_LINKED) == true) {
				rtw_indicate_disconnect(padapter); /* will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not */
			}
	       }

		*pold_state = networktype;

		_clr_fwstate_(pmlmepriv, ~WIFI_NULL_STATE);

		switch (networktype) {
		case Ndis802_11IBSS:
			set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			break;

		case Ndis802_11Infrastructure:
			set_fwstate(pmlmepriv, WIFI_STATION_STATE);
			break;

		case Ndis802_11APMode:
			set_fwstate(pmlmepriv, WIFI_AP_STATE);
			start_ap_mode(padapter);
			/* rtw_indicate_connect(padapter); */

			break;

		case Ndis802_11AutoUnknown:
		case Ndis802_11InfrastructureMax:
			break;
		}

		/* SecClearAllKeys(adapter); */

		/* RT_TRACE(COMP_OID_SET, DBG_LOUD, ("set_infrastructure: fw_state:%x after changing mode\n", */
		/* 									get_fwstate(pmlmepriv))); */

		spin_unlock_bh(&pmlmepriv->lock);
	}
	return true;
}

开发者ID:Lyude，项目名称:linux，代码行数:71，代码来源:rtw_ioctl_set.c

示例13: rtw_set_802_11_ssid

u8 rtw_set_802_11_ssid(_adapter* padapter, NDIS_802_11_SSID *ssid)
{	
	_irqL irqL;
	u8 status = _TRUE;

	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct wlan_network *pnetwork = &pmlmepriv->cur_network;
	_queue *queue = &pmlmepriv->scanned_queue;

#ifdef PLATFORM_WINDOWS
	LARGE_INTEGER	sys_time;
	u32  diff_time,cur_time ;
#endif

	
_func_enter_;
	
	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
		 ("+rtw_set_802_11_ssid: ssid=[%s] fw_state=0x%08x\n",
		  ssid->Ssid, get_fwstate(pmlmepriv)));

	if(padapter->hw_init_completed==_FALSE){
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
			 ("set_ssid: hw_init_completed==_FALSE=>exit!!!\n"));
		return _FALSE;
	}
		
	_enter_critical_bh(&pmlmepriv->lock, &irqL);

	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == _TRUE) {
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
			 ("Set SSID is not allowed under surveying || adhoc master || under linking\n"));
		status = check_fwstate(pmlmepriv, _FW_UNDER_LINKING);
		goto _Abort_Set_SSID;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_,
			 ("set_ssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));

		if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) &&
		    (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == _TRUE))
		{			
			if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE))
			{
				RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
					 ("Set SSID is the same ssid, fw_state=0x%08x\n",
					  get_fwstate(pmlmepriv)));

				if(rtw_is_same_ibss(padapter, pnetwork) == _FALSE)
				{				
					//if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again
					rtw_disassoc_cmd(padapter);

					if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
						rtw_indicate_disconnect(padapter);
						
					rtw_free_assoc_resources(padapter);

					if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
						_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
						set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
					}
				}
				else
				{
				       goto _Abort_Set_SSID;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
			        }			
			}			
#ifdef CONFIG_LPS
			else {
				lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1);
			}
#endif
		}
		else
		{
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set SSID not the same ssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_ssid=[%s] len=0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("assoc_ssid=[%s] len=0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength));

			rtw_disassoc_cmd(padapter);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(padapter);
			
			rtw_free_assoc_resources(padapter);

			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}		
	}

#ifdef PLATFORM_WINDOWS
	if (padapter->securitypriv.btkip_countermeasure==_TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:padapter->securitypriv.btkip_countermeasure==_TRUE\n"));
//.........这里部分代码省略.........

开发者ID:WayWingsDev，项目名称:Gplus_2159_0801，代码行数:101，代码来源:rtw_ioctl_set.c

示例14: rtw_set_802_11_ssid

u8 rtw_set_802_11_ssid(struct rtw_adapter *padapter, struct ndis_802_11_ssid *ssid)
{
	u8 status = _SUCCESS;
	u32 cur_time = 0;

	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct wlan_network *pnetwork = &pmlmepriv->cur_network;

_func_enter_;

	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_notice_,
		 ("+rtw_set_802_11_ssid: ssid =[%s] fw_state= 0x%08x\n",
		  ssid->Ssid, get_fwstate(pmlmepriv)));

	if (padapter->hw_init_completed == false) {
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
			 ("set_ssid: hw_init_completed== false=>exit!!!\n"));
		status = _FAIL;
		goto exit;
	}

	spin_lock_bh(&pmlmepriv->lock);

	DBG_8192D("Set SSID under fw_state= 0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == true)
		goto handle_tkip_countermeasure;
	else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == true)
		goto release_mlme_lock;

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == true) {
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_,
			 ("set_ssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));

		if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) &&
		    (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == true)) {
			if ((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == false)) {
				RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
					 ("Set SSID is the same ssid, fw_state= 0x%08x\n",
					  get_fwstate(pmlmepriv)));

				if (rtw_is_same_ibss(padapter, pnetwork) == false) {
					/* if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again */
					rtw_disassoc_cmd(padapter, 0, true);

					if (check_fwstate(pmlmepriv, _FW_LINKED) == true)
						rtw_indicate_disconnect(padapter);

					rtw_free_assoc_resources(padapter, 1);

					if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true) {
						_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
						set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
					}
				} else {
					goto release_mlme_lock;/* it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again. */
				}
			}
#ifdef CONFIG_LPS
			else {
				rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1);
			}
#endif
		} else {
			RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("Set SSID not the same ssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("set_ssid =[%s] len= 0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength));
			RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("assoc_ssid =[%s] len= 0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength));

			rtw_disassoc_cmd(padapter, 0, true);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == true)
				rtw_indicate_disconnect(padapter);

			rtw_free_assoc_resources(padapter, 1);

			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}
	}

handle_tkip_countermeasure:

	if (padapter->securitypriv.btkip_countermeasure == true) {
		cur_time = rtw_get_current_time();

		if ((cur_time - padapter->securitypriv.btkip_countermeasure_time) > 60 * HZ) {
			padapter->securitypriv.btkip_countermeasure = false;
			padapter->securitypriv.btkip_countermeasure_time = 0;
		} else {
			status = _FAIL;
			goto release_mlme_lock;
		}
	}

	#ifdef CONFIG_VALIDATE_SSID
	if (rtw_validate_ssid(ssid) == false) {
		status = _FAIL;
		goto release_mlme_lock;
	}
//.........这里部分代码省略.........

开发者ID:adamrights，项目名称:rtl8192du，代码行数:101，代码来源:rtw_ioctl_set.c

示例15: rtw_set_802_11_infrastructure_mode

uint8_t rtw_set_802_11_infrastructure_mode(struct rtl_priv* rtlpriv,
	NDIS_802_11_NETWORK_INFRASTRUCTURE networktype)
{
	struct	mlme_priv	*pmlmepriv = &rtlpriv->mlmepriv;
	struct	wlan_network	*cur_network = &pmlmepriv->cur_network;
	NDIS_802_11_NETWORK_INFRASTRUCTURE* pold_state = &(cur_network->network.InfrastructureMode);



	if(*pold_state != networktype)
	{
		spin_lock_bh(&pmlmepriv->lock);

		//DBG_871X("change mode, old_mode=%d, new_mode=%d, fw_state=0x%x\n", *pold_state, networktype, get_fwstate(pmlmepriv));

		if(*pold_state==Ndis802_11APMode)
		{
			//change to other mode from Ndis802_11APMode
			cur_network->join_res = -1;

			stop_ap_mode(rtlpriv);
		}

		if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||(*pold_state==Ndis802_11IBSS))
			rtw_disassoc_cmd(rtlpriv, 0, _TRUE);

		if((check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) ||
			(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)== _TRUE) )
			rtw_free_assoc_resources(rtlpriv, 1);

		if((*pold_state == Ndis802_11Infrastructure) ||(*pold_state == Ndis802_11IBSS))
	       {
			if(check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
			{
				rtw_indicate_disconnect(rtlpriv); //will clr Linked_state; before this function, we must have chked whether  issue dis-assoc_cmd or not
			}
	       }

		*pold_state = networktype;

		_clr_fwstate_(pmlmepriv, ~WIFI_NULL_STATE);

		switch(networktype)
		{
			case Ndis802_11IBSS:
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
				break;

			case Ndis802_11Infrastructure:
				set_fwstate(pmlmepriv, WIFI_STATION_STATE);
				break;

			case Ndis802_11APMode:
				set_fwstate(pmlmepriv, WIFI_AP_STATE);
				start_ap_mode(rtlpriv);
				//rtw_indicate_connect(rtlpriv);

				break;

			case Ndis802_11AutoUnknown:
			case Ndis802_11InfrastructureMax:
				break;
		}

		//SecClearAllKeys(rtlpriv);

		//RT_TRACE(COMP_OID_SET, DBG_LOUD, ("set_infrastructure: fw_state:%x after changing mode\n",
		//									get_fwstate(pmlmepriv) ));

		spin_unlock_bh(&pmlmepriv->lock);
	}



	return _TRUE;
}

开发者ID:ssurba，项目名称:rtl8821au，代码行数:76，代码来源:rtw_ioctl_set.c

示例16: rtw_set_802_11_ssid

uint8_t rtw_set_802_11_ssid(struct rtl_priv* rtlpriv, NDIS_802_11_SSID *ssid)
{
	uint8_t status = _SUCCESS;
	uint32_t	 cur_time = 0;

	struct mlme_priv *pmlmepriv = &rtlpriv->mlmepriv;
	struct wlan_network *pnetwork = &pmlmepriv->cur_network;



	DBG_871X_LEVEL(_drv_always_, "set ssid [%s] fw_state=0x%08x\n",
		       	ssid->Ssid, get_fwstate(pmlmepriv));

	if(rtlpriv->hw_init_completed==_FALSE){
		status = _FAIL;
		goto exit;
	}

	spin_lock_bh(&pmlmepriv->lock);

	DBG_871X("Set SSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		goto handle_tkip_countermeasure;
	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
		goto release_mlme_lock;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{

		if ((pmlmepriv->assoc_ssid.SsidLength == ssid->SsidLength) &&
		    (_rtw_memcmp(&pmlmepriv->assoc_ssid.Ssid, ssid->Ssid, ssid->SsidLength) == _TRUE))
		{
			if((check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE))
			{
				if(rtw_is_same_ibss(rtlpriv, pnetwork) == _FALSE)
				{
					//if in WIFI_ADHOC_MASTER_STATE | WIFI_ADHOC_STATE, create bss or rejoin again
					rtw_disassoc_cmd(rtlpriv, 0, _TRUE);

					if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
						rtw_indicate_disconnect(rtlpriv);

					rtw_free_assoc_resources(rtlpriv, 1);

					if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
						_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
						set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
					}
				}
				else
				{
					goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
				}
			}
			else {
				rtw_lps_ctrl_wk_cmd(rtlpriv, LPS_CTRL_JOINBSS, 1);
			}
		}
		else
		{
			rtw_disassoc_cmd(rtlpriv, 0, _TRUE);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(rtlpriv);

			rtw_free_assoc_resources(rtlpriv, 1);

			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}
	}

handle_tkip_countermeasure:

	if((status=rtw_handle_tkip_countermeasure(rtlpriv)) == _FAIL)
		goto release_mlme_lock;

	#ifdef CONFIG_VALIDATE_SSID
	if (rtw_validate_ssid(ssid) == _FALSE) {
		status = _FAIL;
		goto release_mlme_lock;
	}
	#endif

	memcpy(&pmlmepriv->assoc_ssid, ssid, sizeof(NDIS_802_11_SSID));
	pmlmepriv->assoc_by_bssid=_FALSE;

	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		pmlmepriv->to_join = _TRUE;
	}
	else {
		status = rtw_do_join(rtlpriv);
	}

release_mlme_lock:
	spin_unlock_bh(&pmlmepriv->lock);

//.........这里部分代码省略.........

开发者ID:ssurba，项目名称:rtl8821au，代码行数:101，代码来源:rtw_ioctl_set.c

示例17: rtw_set_802_11_bssid

uint8_t rtw_set_802_11_bssid(struct rtl_priv* rtlpriv, uint8_t *bssid)
{
	uint8_t status=_SUCCESS;

	struct mlme_priv *pmlmepriv = &rtlpriv->mlmepriv;



	DBG_871X_LEVEL(_drv_always_, "set bssid:%pM\n", bssid);

	if ((bssid[0]==0x00 && bssid[1]==0x00 && bssid[2]==0x00 && bssid[3]==0x00 && bssid[4]==0x00 &&bssid[5]==0x00) ||
	    (bssid[0]==0xFF && bssid[1]==0xFF && bssid[2]==0xFF && bssid[3]==0xFF && bssid[4]==0xFF &&bssid[5]==0xFF))
	{
		status = _FAIL;
		goto exit;
	}

	spin_lock_bh(&pmlmepriv->lock);


	DBG_871X("Set BSSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		goto handle_tkip_countermeasure;
	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
		goto release_mlme_lock;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{

		if (_rtw_memcmp(&pmlmepriv->cur_network.network.MacAddress, bssid, ETH_ALEN) == _TRUE)
		{
			if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE)
				goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
		} else {
			rtw_disassoc_cmd(rtlpriv, 0, _TRUE);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(rtlpriv);

			rtw_free_assoc_resources(rtlpriv, 1);

			if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}
	}

handle_tkip_countermeasure:
	//should we add something here...?
	if((status=rtw_handle_tkip_countermeasure(rtlpriv)) == _FAIL)
		goto release_mlme_lock;

	memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN);
	pmlmepriv->assoc_by_bssid=_TRUE;

	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		pmlmepriv->to_join = _TRUE;
	}
	else {
		status = rtw_do_join(rtlpriv);
	}

release_mlme_lock:
	spin_unlock_bh(&pmlmepriv->lock);

exit:



	return status;
}

开发者ID:ssurba，项目名称:rtl8821au，代码行数:73，代码来源:rtw_ioctl_set.c

示例18: rtw_gspi_suspend

static int rtw_gspi_suspend(struct spi_device *spi, pm_message_t mesg)
{
	struct dvobj_priv *dvobj = spi_get_drvdata(spi);
	PADAPTER padapter = dvobj->if1;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct net_device *pnetdev = padapter->pnetdev;
	int ret = 0;

	u32 start_time = rtw_get_current_time();

	_func_enter_;

	DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);

	pwrpriv->bInSuspend = _TRUE;

	while (pwrpriv->bips_processing == _TRUE)
		rtw_msleep_os(1);

	if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved))
	{
		DBG_871X("%s bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n", __FUNCTION__
			,padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved);
		goto exit;
	}

	rtw_cancel_all_timer(padapter);
	LeaveAllPowerSaveMode(padapter);

	//padapter->net_closed = _TRUE;
	//s1.
	if(pnetdev)
	{
		netif_carrier_off(pnetdev);
		rtw_netif_stop_queue(pnetdev);
	}
#ifdef CONFIG_WOWLAN
	padapter->pwrctrlpriv.bSupportRemoteWakeup=_TRUE;
#else
	//s2.
	//s2-1.  issue rtw_disassoc_cmd to fw
	disconnect_hdl(padapter, NULL);
	//rtw_disassoc_cmd(padapter);
#endif

#ifdef CONFIG_LAYER2_ROAMING_RESUME
	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) )
	{
		DBG_871X("%s %s(" MAC_FMT "), length:%d assoc_ssid.length:%d\n",__FUNCTION__,
				pmlmepriv->cur_network.network.Ssid.Ssid,
				MAC_ARG(pmlmepriv->cur_network.network.MacAddress),
				pmlmepriv->cur_network.network.Ssid.SsidLength,
				pmlmepriv->assoc_ssid.SsidLength);

		pmlmepriv->to_roaming = 1;
	}
#endif

	//s2-2.  indicate disconnect to os
	rtw_indicate_disconnect(padapter);
	//s2-3.
	rtw_free_assoc_resources(padapter, 1);

	//s2-4.
	rtw_free_network_queue(padapter, _TRUE);

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_dev_unload(padapter);

	if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
		rtw_indicate_scan_done(padapter, 1);

	if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING))
		rtw_indicate_disconnect(padapter);

	// interface deinit
	gspi_deinit(dvobj);
	RT_TRACE(_module_hci_intfs_c_, _drv_notice_, ("%s: deinit GSPI complete!\n", __FUNCTION__));

	rtw_wifi_gpio_wlan_ctrl(WLAN_PWDN_OFF);
	rtw_mdelay_os(1);
exit:
	DBG_871X("<===  %s return %d.............. in %dms\n", __FUNCTION__
		, ret, rtw_get_passing_time_ms(start_time));

	_func_exit_;
	return ret;
}

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:90，代码来源:gspi_intf.c

示例19: rtw_hw_suspend

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtw_free_recvframe函数代码示例发布时间：2022-05-30

C++ rtw_end_of_queue_search函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19168|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtw_free_assoc_resources函数代码示例

示例1: rtw_set_802_11_disassociate

示例2: netdev_close

示例3: netdev_close

示例4: netdev_close

示例5: netdev_close

示例6: rtw_set_802_11_disassociate

示例7: rtw_set_802_11_disassociate

示例8: rtw_set_802_11_infrastructure_mode

示例9: rtw_set_802_11_ssid

示例10: rtw_set_802_11_bssid

示例11: rtw_set_802_11_ssid

示例12: rtw_set_802_11_infrastructure_mode

示例13: rtw_set_802_11_ssid

示例14: rtw_set_802_11_ssid

示例15: rtw_set_802_11_infrastructure_mode

示例16: rtw_set_802_11_ssid

示例17: rtw_set_802_11_bssid

示例18: rtw_gspi_suspend

示例19: rtw_hw_suspend

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053