C++ rtrim函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtrim函数的典型用法代码示例。如果您正苦于以下问题：C++ rtrim函数的具体用法？C++ rtrim怎么用？C++ rtrim使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtrim函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: NetlibHttpRecvHeaders

INT_PTR NetlibHttpRecvHeaders(WPARAM wParam, LPARAM lParam)
{
	NetlibConnection *nlc = (struct NetlibConnection*)wParam;
	if (!NetlibEnterNestedCS(nlc, NLNCS_RECV))
		return 0;

	char *peol, *pbuffer;
	int headersCount = 0, bufferSize = 8192;

	DWORD dwRequestTimeoutTime = GetTickCount() + HTTPRECVDATATIMEOUT;
	NETLIBHTTPREQUEST *nlhr = (NETLIBHTTPREQUEST*)mir_calloc(sizeof(NETLIBHTTPREQUEST));
	nlhr->cbSize = sizeof(NETLIBHTTPREQUEST);
	nlhr->nlc = nlc;  // Needed to id connection in the protocol HTTP gateway wrapper functions
	nlhr->requestType = REQUEST_RESPONSE;

	int firstLineLength = 0;
	if (!HttpPeekFirstResponseLine(nlc, dwRequestTimeoutTime, lParam | MSG_PEEK, &nlhr->resultCode, &nlhr->szResultDescr, &firstLineLength)) {
		NetlibLeaveNestedCS(&nlc->ncsRecv);
		NetlibHttpFreeRequestStruct(0, (LPARAM)nlhr);
		return 0;
	}

	char *buffer = (char*)mir_alloc(bufferSize + 1);
	int bytesPeeked = NLRecv(nlc, buffer, min(firstLineLength, bufferSize), lParam | MSG_DUMPASTEXT);
	if (bytesPeeked != firstLineLength) {
		NetlibLeaveNestedCS(&nlc->ncsRecv);
		NetlibHttpFreeRequestStruct(0, (LPARAM)nlhr);
		if (bytesPeeked != SOCKET_ERROR) SetLastError(ERROR_HANDLE_EOF);
		mir_free(buffer);
		return 0;
	}

	// Make sure all headers arrived
	bytesPeeked = 0;
	for (bool headersCompleted = false; !headersCompleted;) {
		if (bytesPeeked >= bufferSize) {
			bufferSize += 8192;
			mir_free(buffer);
			if (bufferSize > 32 * 1024) {
				bytesPeeked = 0;
				break;
			}
			buffer = (char*)mir_alloc(bufferSize + 1);
		}

		bytesPeeked = RecvWithTimeoutTime(nlc, dwRequestTimeoutTime, buffer, bufferSize, MSG_PEEK | MSG_NODUMP | lParam);
		if (bytesPeeked == 0)
			break;

		if (bytesPeeked == SOCKET_ERROR) {
			bytesPeeked = 0;
			break;
		}
		buffer[bytesPeeked] = 0;

		for (pbuffer = buffer, headersCount = 0;; pbuffer = peol + 1, ++headersCount) {
			peol = strchr(pbuffer, '\n');
			if (peol == NULL) break;
			if (peol == pbuffer || (peol == (pbuffer + 1) && *pbuffer == '\r')) {
				bytesPeeked = peol - buffer + 1;
				headersCompleted = true;
				break;
			}
		}
	}

	// Receive headers
	if (bytesPeeked > 0)
		bytesPeeked = NLRecv(nlc, buffer, bytesPeeked, lParam | MSG_DUMPASTEXT);
	if (bytesPeeked <= 0) {
		NetlibLeaveNestedCS(&nlc->ncsRecv);
		NetlibHttpFreeRequestStruct(0, (LPARAM)nlhr);
		mir_free(buffer);
		return 0;
	}
	buffer[bytesPeeked] = 0;

	nlhr->headersCount = headersCount;
	nlhr->headers = (NETLIBHTTPHEADER*)mir_calloc(sizeof(NETLIBHTTPHEADER) * headersCount);

	for (pbuffer = buffer, headersCount = 0;; pbuffer = peol + 1, ++headersCount) {
		peol = strchr(pbuffer, '\n');
		if (peol == NULL || peol == pbuffer || (peol == (pbuffer + 1) && *pbuffer == '\r')) break;
		*peol = 0;

		char *pColon = strchr(pbuffer, ':');
		if (pColon == NULL) {
			NetlibHttpFreeRequestStruct(0, (LPARAM)nlhr); nlhr = NULL;
			SetLastError(ERROR_INVALID_DATA);
			break;
		}

		*(pColon++) = 0;
		nlhr->headers[headersCount].szName = mir_strdup(rtrim(pbuffer));
		nlhr->headers[headersCount].szValue = mir_strdup(lrtrimp(pColon));
	}

	NetlibLeaveNestedCS(&nlc->ncsRecv);
	mir_free(buffer);
	return (INT_PTR)nlhr;
//.........这里部分代码省略.........

开发者ID:kxepal，项目名称:miranda-ng，代码行数:101，代码来源:netlibhttp.cpp

示例2: trim

	std::string trim(const std::string& a_Input, char l_ToTrim){
		return ltrim(rtrim(a_Input, l_ToTrim), l_ToTrim);
	}

开发者ID:Jasper-Bekkers，项目名称:krryn-ui，代码行数:3，代码来源:string_util.cpp

示例3: ltrim

std::string 
ProgrammableOpAttributes::trim(const std::string &s) 
{
        return ltrim(rtrim(s));
}

开发者ID:HarinarayanKrishnan，项目名称:VisIt28RC_Trunk，代码行数:5，代码来源:ProgrammableOpAttributes.C

示例4: g_malloc

static GtkWidget *script_info_add(const char *path, const char *fname)
{
    char *fullname;
    ScriptInfo *si;
    FILE *script;
    int i;
    char line[1024];
    const char *str;
    char *dot;
    char *underscore;
    GtkWidget *menuitem = NULL;

    fullname = g_malloc(strlen(path)+strlen(fname)+2);
    sprintf(fullname,"%s/%s",path,fname);

    script = fopen(fullname,"r");
    if (script)
    {
        si = (ScriptInfo *)g_malloc0(sizeof(ScriptInfo));
        si->script_file = strdup(fname);

        //rtrim(line); uninitialized yet

        for (i=0; i<30; i++)
        {
            if (fgets(line,1024,script)==NULL) break;

            rtrim(line);

            if ((str=locate_after_prefix("@name",line))!=NULL)
            {
                si->script_name = g_strdup(str);
            }
            else if ((str=locate_after_prefix("@description",line))!=NULL)
            {
                si->script_description = g_strdup(str);
            }
            else if ((str=locate_after_prefix("@targets",line))!=NULL)
            {
                si->script_targeted_version = g_strdup(str);
            }
        }

        fclose(script);

        if (si->script_name==NULL)
        {
            si->script_name = g_strdup(fname);

            dot = rindex(si->script_name,'.');
            if (dot) *dot=0;

            for (underscore=si->script_name; *underscore!=0; underscore++)
            {
                if (*underscore=='_') *underscore=' ';
            }
        }

        si->prev = SCRIPTS;
        SCRIPTS = si;

        menuitem = gtk_menu_item_new_with_label(si->script_name);
        if (si->script_description) gtk_widget_set_tooltip_text(menuitem,si->script_description);
        g_signal_connect(GTK_WIDGET(menuitem),"activate",G_CALLBACK(menu_run_script_cb),si);
        gtk_widget_show(menuitem);
    }
    else
    {
        log_printf(LOG_ERROR,"Failed to open %s for reading",fullname);
    }
    g_free(fullname);
    return menuitem;
}

开发者ID:nuschpl，项目名称:cardpeek，代码行数:73，代码来源:gui_cardview.c

示例5: rtrim

char *trim(char *s)
{
    return rtrim(ltrim(s)); 
}

开发者ID:mike-seger，项目名称:raop2_play，代码行数:4，代码来源:rtsp_client.c

示例6: ltrim

// trim from both ends 
static inline std::string &trim(std::string &s) { 
        return ltrim(rtrim(s)); 
}

开发者ID:Mateuus，项目名称:newundead，代码行数:4，代码来源:main.cpp

示例7: assert

bool CLemWord::ProcessPlmLineForTheFirstHomonym(const char* sPlmLine, MorphLanguageEnum langua, int& OborotNo)
{
    char buffer[CriticalGraphemLineLength*2];
    assert (strlen(sPlmLine) < CriticalGraphemLineLength*2);
    strcpy(buffer, sPlmLine);
    char* strPlmLine = buffer;


    // откусываю признаки конца строки, если они по¤вились
    size_t iPlmLineLen = strlen(strPlmLine);
    rtrim(strPlmLine,&iPlmLineLen);

    size_t iFirstFieldLen = strcspn(strPlmLine," ");
    char WordBuffer[CriticalTokenLength+1];
    strncpy(WordBuffer, strPlmLine, iFirstFieldLen);
    WordBuffer[iFirstFieldLen] = '\0';
    SetWordStr(WordBuffer, langua);


    size_t iSomeUnusefulDigitsLen = strspn(strPlmLine + iFirstFieldLen," -1234567890");

    //  reading file position of an item from graline
    if (sscanf(strPlmLine + iFirstFieldLen, "%i %i", &m_GraphematicalUnitOffset, &m_TokenLengthInFile) != 2)
        return false;

    strPlmLine += iFirstFieldLen + iSomeUnusefulDigitsLen;

    int MorphSectionOffset = ProcessGraphematicalDescriptors(strPlmLine);

    if( m_bSpace )
        return true;

    CHomonym*  pHomonym  = AddNewHomonym();

    if (HasDes(OEXPR1))
        OborotNo = ParseOborotNo(m_UnparsedGraphemDescriptorsStr);

    if (OborotNo != -1)
    {
        pHomonym->m_OborotNo =  OborotNo;
        pHomonym->m_bInOb =  true;
        pHomonym->m_bOborot1 = HasDes(OEXPR1);
        pHomonym->m_bOborot2 = HasDes(OEXPR2);
    }
    if (HasDes(OEXPR2))
        OborotNo = -1;

    if( MorphSectionOffset == strlen(strPlmLine) )
        pHomonym->SetLemma(m_strWord);
    else
        if (!pHomonym->ProcessLemmaAndGrammems(strPlmLine+MorphSectionOffset))
            return false;

    InitLevelSpecific(pHomonym);

    if	(		(m_strWord == "\"")
        ||	(m_strWord == "'")
        )
        DelDes(OPun);




    if (pHomonym->m_LemSign != '+')
        m_bPredicted = true;

    return true;
}

开发者ID:eamosov，项目名称:lspl，代码行数:68，代码来源:LemWord.cpp

示例8: ltrim

char *trim(char *str) {
	return ltrim(rtrim(str));
}

开发者ID:crawlingChaos，项目名称:dosbox-x，代码行数:3，代码来源:support.cpp

示例9: build_doctype

std::string GumboInterface::prettyprint(GumboNode* node, int lvl, const std::string indent_chars)
{

    // special case the document node
    if (node->type == GUMBO_NODE_DOCUMENT) {
      std::string results = build_doctype(node);
      results.append(prettyprint_contents(node,lvl+1,indent_chars));
      return results;
    }

    std::string close              = "";
    std::string closeTag           = "";
    std::string atts               = "";
    std::string tagname            = get_tag_name(node);
    std::string parentname         = get_tag_name(node->parent);
    bool in_head                   = (parentname == "head");
    // bool need_special_handling     = in_set(special_handling, tagname);
    bool is_empty_tag              = in_set(empty_tags, tagname);
    bool no_entity_substitution    = in_set(no_entity_sub, tagname);
    bool keep_whitespace           = in_set(preserve_whitespace, tagname);
    bool is_inline                 = in_set(nonbreaking_inline, tagname) && (parentname != "body");
    bool is_structural             = in_set(structural_tags, tagname);
    bool pp_okay                   = !is_inline && !keep_whitespace;
    char c                         = indent_chars.at(0);
    int  n                         = indent_chars.length(); 

    // build attr string
    const GumboVector * attribs = &node->v.element.attributes;
    for (unsigned int i=0; i< attribs->length; ++i) {
        GumboAttribute* at = static_cast<GumboAttribute*>(attribs->data[i]);
        atts.append(build_attributes(at, no_entity_substitution));
    }

    // determine closing tag type
    if (is_empty_tag) {
        close = "/";
    } else {
        closeTag = "</" + tagname + ">";
    }

    std::string indent_space = std::string((lvl-1)*n,c);
    std::string contents;

    // prettyprint your contents
    if (is_structural && tagname != "html") {
        contents = prettyprint_contents(node, lvl+1, indent_chars);
    } else {
        contents = prettyprint_contents(node, lvl, indent_chars);
    }

    if (is_structural) {
        rtrim(contents);
        if (!contents.empty()) contents.append("\n");
    }

    // remove any leading or trailing whitespace form within paragraphs
    if (tagname == "p") {
        ltrim(contents);
        rtrim(contents);
    }

    char last_char = ' ';
    if (!contents.empty()) {
        last_char = contents.at(contents.length()-1);
    } 

    // build results
    std::string results;

    if (!is_inline && !in_set(nonbreaking_inline, parentname)) {
      results.append(indent_space);
    }

    results.append("<"+tagname+atts+close+">");

    if (pp_okay && is_structural && !contents.empty()) {
        results.append("\n");
    }

    results.append(contents);

    if (pp_okay && (last_char != '\n') && !contents.empty() && is_structural) {
        results.append("\n");
    }

    // handle any indent before structural close tags
    if (!is_inline && is_structural && !closeTag.empty() && !contents.empty()) {
        results.append(indent_space);
    }

    results.append(closeTag);

    if ((pp_okay || tagname =="br") && !in_set(nonbreaking_inline, parentname)) {
        if (!in_head  && tagname != "html") {
            results.append("\n\n");
        } else {
            results.append("\n");
        }
    }

//.........这里部分代码省略.........

开发者ID:joyplug，项目名称:Sigil，代码行数:101，代码来源:GumboInterface.cpp

示例10: ltrim

 inline std::string &trim(std::string &s, char x)
 {
     return ltrim(rtrim(s, x), x);
 }

开发者ID:LTears，项目名称:practice，代码行数:4，代码来源:str_functs.hpp

示例11: do_command

static int do_command(char type, const char *command, const char *parameters, char *response)
{
	char	buffer[SMALLBUF];
	int	count, ret;

	ser_flush_io(upsfd);

	if (response) {
		*response = '\0';
	}

	snprintf(buffer, sizeof(buffer), "~00%c%03d%s%s", type, (int)(strlen(command) + strlen(parameters)), command, parameters);

	ret = ser_send_pace(upsfd, 10000, "%s", buffer);
	if (ret <= 0) {
		upsdebug_with_errno(3, "do_command: send [%s]", buffer);
		return -1;
	}

	upsdebugx(3, "do_command: %d bytes sent [%s] -> OK", ret, buffer);

	ret = ser_get_buf_len(upsfd, (unsigned char *)buffer, 4, 3, 0);
	if (ret < 0) {
		upsdebug_with_errno(3, "do_command: read");
		return -1;
	}
	if (ret == 0) {
		upsdebugx(3, "do_command: read -> TIMEOUT");
		return -1;
	}

	buffer[ret] = '\0';
	upsdebugx(3, "do_command: %d byted read [%s]", ret, buffer);

	if (!strcmp(buffer, "~00D")) {

		ret = ser_get_buf_len(upsfd, (unsigned char *)buffer, 3, 3, 0);
		if (ret < 0) {
			upsdebug_with_errno(3, "do_command: read");
			return -1;
		}
		if (ret == 0) {
			upsdebugx(3, "do_command: read -> TIMEOUT");
			return -1;
		}

		buffer[ret] = '\0';
		upsdebugx(3, "do_command: %d bytes read [%s]", ret, buffer);

		count = atoi(buffer);
		if (count >= MAX_RESPONSE_LENGTH) {
			upsdebugx(3, "do_command: response exceeds expected size!");
			return -1;
		}

		if (count && !response) {
			upsdebugx(3, "do_command: response not expected!");
			return -1;
		}

		if (count == 0) {
			return 0;
		}

		ret = ser_get_buf_len(upsfd, (unsigned char *)response, count, 3, 0);
		if (ret < 0) {
			upsdebug_with_errno(3, "do_command: read");
			return -1;
		}
		if (ret == 0) {
			upsdebugx(3, "do_command: read -> TIMEOUT");
			return -1;
		}

		response[ret] = '\0';
		upsdebugx(3, "do_command: %d bytes read [%s]", ret, response);

		/* Tripp Lite pads their string responses with spaces.
		   I don't like that, so I remove them.  This is safe to
		   do with all responses for this protocol, so I just
		   do that here. */
		rtrim(response, ' ');

		return ret;
	}

	if (!strcmp(buffer, "~00A")) {
		return 0;
	}

	return -1;
}

开发者ID:AlexLov，项目名称:nut，代码行数:92，代码来源:tripplitesu.c

示例12: trim

 std::string & trim(std::string & str)
 {
     return ltrim(rtrim(str));
 }

开发者ID:chakke，项目名称:zzz，代码行数:4，代码来源:Functions.cpp

示例13: update_topol

static void update_topol(const char *topinout, int p_num, int n_num,
                         const char *p_name, const char *n_name, char *grpname)
{
#define TEMP_FILENM "temp.top"
    FILE    *fpin, *fpout;
    char     buf[STRLEN], buf2[STRLEN], *temp, **mol_line = NULL;
    int      line, i, nsol, nmol_line, sol_line, nsol_last;
    gmx_bool bMolecules;

    printf("\nProcessing topology\n");
    fpin  = gmx_ffopen(topinout, "r");
    fpout = gmx_ffopen(TEMP_FILENM, "w");

    line       = 0;
    bMolecules = FALSE;
    nmol_line  = 0;
    sol_line   = -1;
    nsol_last  = -1;
    while (fgets(buf, STRLEN, fpin))
    {
        line++;
        strcpy(buf2, buf);
        if ((temp = strchr(buf2, '\n')) != NULL)
        {
            temp[0] = '\0';
        }
        ltrim(buf2);
        if (buf2[0] == '[')
        {
            buf2[0] = ' ';
            if ((temp = strchr(buf2, '\n')) != NULL)
            {
                temp[0] = '\0';
            }
            rtrim(buf2);
            if (buf2[strlen(buf2)-1] == ']')
            {
                buf2[strlen(buf2)-1] = '\0';
                ltrim(buf2);
                rtrim(buf2);
                bMolecules = (gmx_strcasecmp(buf2, "molecules") == 0);
            }
            fprintf(fpout, "%s", buf);
        }
        else if (!bMolecules)
        {
            fprintf(fpout, "%s", buf);
        }
        else
        {
            /* Check if this is a line with solvent molecules */
            sscanf(buf, "%s", buf2);
            if (gmx_strcasecmp(buf2, grpname) == 0)
            {
                sol_line = nmol_line;
                sscanf(buf, "%*s %d", &nsol_last);
            }
            /* Store this molecules section line */
            srenew(mol_line, nmol_line+1);
            mol_line[nmol_line] = strdup(buf);
            nmol_line++;
        }
    }
    gmx_ffclose(fpin);

    if (sol_line == -1)
    {
        gmx_ffclose(fpout);
        gmx_fatal(FARGS, "No line with moleculetype '%s' found the [ molecules ] section of file '%s'", grpname, topinout);
    }
    if (nsol_last < p_num+n_num)
    {
        gmx_ffclose(fpout);
        gmx_fatal(FARGS, "The last entry for moleculetype '%s' in the [ molecules ] section of file '%s' has less solvent molecules (%d) than were replaced (%d)", grpname, topinout, nsol_last, p_num+n_num);
    }

    /* Print all the molecule entries */
    for (i = 0; i < nmol_line; i++)
    {
        if (i != sol_line)
        {
            fprintf(fpout, "%s", mol_line[i]);
        }
        else
        {
            printf("Replacing %d solute molecules in topology file (%s) "
                   " by %d %s and %d %s ions.\n",
                   p_num+n_num, topinout, p_num, p_name, n_num, n_name);
            nsol_last -= p_num + n_num;
            if (nsol_last > 0)
            {
                fprintf(fpout, "%-10s  %d\n", grpname, nsol_last);
            }
            if (p_num > 0)
            {
                fprintf(fpout, "%-15s  %d\n", p_name, p_num);
            }
            if (n_num > 0)
            {
                fprintf(fpout, "%-15s  %d\n", n_name, n_num);
//.........这里部分代码省略.........

开发者ID:ElsevierSoftwareX，项目名称:SOFTX-D-15-00003，代码行数:101，代码来源:gmx_genion.c

示例14: ltrim

std::string
ossfs::util::trim(const std::string &s)
{
    return ltrim(rtrim(s));
}

开发者ID:sreadfox，项目名称:ossfs，代码行数:5，代码来源:util.cpp

示例15: main

int main(void) {
    plan(60);

    /* lowercase */
    char test[100];
    ok(lc(NULL) == NULL, "lc(NULL)");
    strcpy(test, "Yes"); like(lc(test), "yes", "lc(yes)");
    strcpy(test, "YES"); like(lc(test), "yes", "lc(YES)");
    strcpy(test, "yeS"); like(lc(test), "yes", "lc(yeS)");


    /* trim */
    strcpy(test, "    text  "); like(ltrim(test), "text  ",   "ltrim()");
    strcpy(test, "    text  "); like(rtrim(test), "    text", "rtrim()");
    strcpy(test, "    text  "); like(trim(test),  "text",     "trim()");
    char *test2;
    test2 = strdup("   text   ");  like(trim(test2),  "text", "trim()");
    free(test2);

    /* parse_yes_or_no */
    ok(parse_yes_or_no(NULL,    GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 1");
    ok(parse_yes_or_no(NULL,    GM_DISABLED) == GM_DISABLED, "parse_yes_or_no 2");
    strcpy(test, "");      ok(parse_yes_or_no(test, GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 3");
    strcpy(test, "");      ok(parse_yes_or_no(test, GM_DISABLED) == GM_DISABLED, "parse_yes_or_no 4");
    strcpy(test, "yes");   ok(parse_yes_or_no(test, GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 5");
    strcpy(test, "true");  ok(parse_yes_or_no(test, GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 6");
    strcpy(test, "Yes");   ok(parse_yes_or_no(test, GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 7");
    strcpy(test, "1");     ok(parse_yes_or_no(test, GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 8");
    strcpy(test, "On");    ok(parse_yes_or_no(test, GM_ENABLED)  == GM_ENABLED, "parse_yes_or_no 9");
    strcpy(test, "Off");   ok(parse_yes_or_no(test, GM_ENABLED)  == GM_DISABLED, "parse_yes_or_no 10");
    strcpy(test, "false"); ok(parse_yes_or_no(test, GM_ENABLED)  == GM_DISABLED, "parse_yes_or_no 11");
    strcpy(test, "no");    ok(parse_yes_or_no(test, GM_ENABLED)  == GM_DISABLED, "parse_yes_or_no 12");
    strcpy(test, "0");     ok(parse_yes_or_no(test, GM_ENABLED)  == GM_DISABLED, "parse_yes_or_no 13");


    /* trim */
    ok(trim(NULL) == NULL, "trim(NULL)");
    strcpy(test, " test "); like(trim(test), "^test$", "trim(' test ')");
    strcpy(test, "\ntest\n"); like(trim(test), "^test$", "trim('\\ntest\\n')");

    /* reading keys */
    mod_gm_opt_t *mod_gm_opt;
    mod_gm_opt = malloc(sizeof(mod_gm_opt_t));
    int rc = set_default_options(mod_gm_opt);

    ok(rc == 0, "setting default options");
    mod_gm_opt->keyfile = strdup("t/data/test1.key");
    read_keyfile(mod_gm_opt);
    //printf_hex(mod_gm_opt->crypt_key, 32);
    test[0]='\x0';
    int i = 0;
    char hex[4];
    for(i=0; i<32; i++) {
        hex[0] = '\x0';
        snprintf(hex, 4, "%02x", mod_gm_opt->crypt_key[i]);
        strncat(test, hex, 4);
    }
    like(test, "3131313131313131313131313131313131313131313131313131313131310000", "read keyfile t/data/test1.key");

    free(mod_gm_opt->keyfile);
    mod_gm_opt->keyfile = strdup("t/data/test2.key");
    read_keyfile(mod_gm_opt);

    like(mod_gm_opt->crypt_key, "abcdef", "reading keyfile t/data/test2.key");

    free(mod_gm_opt->keyfile);
    mod_gm_opt->keyfile = strdup("t/data/test3.key");
    read_keyfile(mod_gm_opt);
    //printf_hex(mod_gm_opt->crypt_key, 32);
    like(mod_gm_opt->crypt_key, "11111111111111111111111111111111", "reading keyfile t/data/test3.key");
    ok(strlen(mod_gm_opt->crypt_key) == 32, "key size for t/data/test3.key");


    /* encrypt */
    char * key       = "test1234";
    char * encrypted = malloc(GM_BUFFERSIZE);
    char * text      = "test message";
    char * base      = "a7HqhQEE8TQBde9uknpPYQ==";
    mod_gm_crypt_init(key);
    int len;
    len = mod_gm_encrypt(&encrypted, text, GM_ENCODE_AND_ENCRYPT);
    ok(len == 24, "length of encrypted only");
    like(encrypted, base, "encrypted string");

    /* decrypt */
    char * decrypted = malloc(GM_BUFFERSIZE);
    mod_gm_decrypt(&decrypted, encrypted, GM_ENCODE_AND_ENCRYPT);
    like(decrypted, text, "decrypted text");
    free(decrypted);
    free(encrypted);

    /* base 64 */
    char * base64 = malloc(GM_BUFFERSIZE);
    len = mod_gm_encrypt(&base64, text, GM_ENCODE_ONLY);
    ok(len == 16, "length of encode only");
    like(base64, "dGVzdCBtZXNzYWdl", "base64 only string");

    /* debase 64 */
    char * debase64 = malloc(GM_BUFFERSIZE);
    mod_gm_decrypt(&debase64, base64, GM_ENCODE_ONLY);
//.........这里部分代码省略.........

开发者ID:jayKayEss，项目名称:mod_gearman，代码行数:101，代码来源:01-utils.c

示例16: ltrim

void StringUtil::atrim(std::wstring& str) {
	ltrim(str);
	rtrim(str);
}

开发者ID:gvsurenderreddy，项目名称:openulteo，代码行数:4，代码来源:StringUtil.cpp

示例17: trim

// trim from left & right
inline std::string& trim(std::string& s, const char* t = " \t\n\r\f\v")
{
    return ltrim(rtrim(s, t), t);
}

开发者ID:molguin-qc，项目名称:xpress-apex，代码行数:5，代码来源:utils.hpp

示例18: trim

// trim from both ends
string& trim(string &s) {
  return ltrim(rtrim(s));
}

开发者ID:dabrunhosa，项目名称:gvd，代码行数:4，代码来源:options.cpp

示例19: rtrim_copy

inline std::string rtrim_copy(std::string s, const char* t = " \t\n\r\f\v")
{
    return rtrim(s, t);
}

开发者ID:molguin-qc，项目名称:xpress-apex，代码行数:4，代码来源:utils.hpp

示例20: trim

 static std::string& trim(std::string &s)
 { return rtrim(ltrim(s)); }

开发者ID:juruen，项目名称:stdman，代码行数:2，代码来源:str.hpp

注：本文中的rtrim函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rts_error函数代码示例发布时间：2022-05-30

C++ rtp_profile_get_payload函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19168|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtrim函数代码示例

示例1: NetlibHttpRecvHeaders

示例2: trim

示例3: ltrim

示例4: g_malloc

示例5: rtrim

示例6: ltrim

示例7: assert

示例8: ltrim

示例9: build_doctype

示例10: ltrim

示例11: do_command

示例12: trim

示例13: update_topol

示例14: ltrim

示例15: main

示例16: ltrim

示例17: trim

示例18: trim

示例19: rtrim_copy

示例20: trim

请发表评论

全部评论

上一篇：

下一篇：

AllenDowney/ThinkDataStructures: LaTeX s

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053