C++ rp_fatal函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rp_fatal函数的典型用法代码示例。如果您正苦于以下问题：C++ rp_fatal函数的具体用法？C++ rp_fatal怎么用？C++ rp_fatal使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rp_fatal函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: dlbindack

void dlbindack(int fd, char *bufp)
{
        union   DL_primitives   *dlp;
        struct  strbuf  ctl;
        int     flags;

        ctl.maxlen = MAXDLBUF;
        ctl.len = 0;
        ctl.buf = bufp;

        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlbindack");

        dlp = (union DL_primitives *) ctl.buf;

        expecting(DL_BIND_ACK, dlp);

        if (flags != RS_HIPRI)
                rp_fatal("dlbindack:  DL_OK_ACK was not M_PCPROTO");

        if (ctl.len < sizeof (dl_bind_ack_t)) {
		char buffer[256];
		sprintf(buffer, "dlbindack:  short response ctl.len:  %d", ctl.len);
		rp_fatal(buffer); 
	}
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:25，代码来源:if.c

示例2: openInterface

/**********************************************************************
*%FUNCTION: openInterface
*%ARGUMENTS:
* ifname -- name of interface
* type -- Ethernet frame type
* hwaddr -- if non-NULL, set to the hardware address
*%RETURNS:
* A raw socket for talking to the Ethernet card.  Exits on error.
*%DESCRIPTION:
* Opens a raw Ethernet socket
***********************************************************************/
int
openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
{
    int fd;
    long buf[MAXDLBUF]; 

	union   DL_primitives   *dlp;

    char base_dev[PATH_MAX]; 
    int ppa; 

    if(strlen(ifname) > PATH_MAX) {
	rp_fatal("socket: string to long"); 
    }

    ppa = atoi(&ifname[strlen(ifname)-1]);
    strncpy(base_dev, ifname, PATH_MAX); 
    base_dev[strlen(base_dev)-1] = '\0'; 

/* rearranged order of DLPI code - delphys 20010803 */
    dlp = (union DL_primitives*) buf;

    if (( fd = open(base_dev, O_RDWR)) < 0) {
	/* Give a more helpful message for the common error case */
	if (errno == EPERM) {
	    rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
	}
	fatalSys("socket");
    }

/* rearranged order of DLPI code - delphys 20010803 */
    dlattachreq(fd, ppa); 
    dlokack(fd, (char *)buf);

    dlbindreq(fd, type, 0, DL_CLDLS, 0, 0);
    dlbindack(fd, (char *)buf);

    dlinforeq(fd);
    dlinfoack(fd, (char *)buf);

    dl_abssaplen = ABS(dlp->info_ack.dl_sap_length);
    dl_saplen = dlp->info_ack.dl_sap_length;
    if (ETHERADDRL != (dlp->info_ack.dl_addr_length - dl_abssaplen))
	fatalSys("invalid destination physical address length");
    dl_addrlen = dl_abssaplen + ETHERADDRL;

/* ethernet address retrieved as part of DL_INFO_ACK - delphys 20010803 */
    memcpy(hwaddr, (u_char*)((char*)(dlp) + (int)(dlp->info_ack.dl_addr_offset)), ETHERADDRL);

    if ( strioctl(fd, DLIOCRAW, -1, 0, NULL) < 0 ) { 
	fatalSys("DLIOCRAW"); 
    }

    if (ioctl(fd, I_FLUSH, FLUSHR) < 0) fatalSys("I_FLUSH");

    return fd;
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:68，代码来源:if.c

示例3: sendPacket

/***********************************************************************
*%FUNCTION: sendPacket
*%ARGUMENTS:
* sock -- socket to send to
* pkt -- the packet to transmit
* size -- size of packet (in bytes)
*%RETURNS:
* 0 on success; -1 on failure
*%DESCRIPTION:
* Transmits a packet
***********************************************************************/
int
sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size)
{
#if defined(USE_BPF)
    if (write(sock, pkt, size) < 0) {
	sysErr("write (sendPacket)");
	return -1;
    }
#elif defined(HAVE_STRUCT_SOCKADDR_LL)
    if (send(sock, pkt, size, 0) < 0) {
	sysErr("send (sendPacket)");
	return -1;
    }
#else

    struct sockaddr sa;

    if (!conn) {
	rp_fatal("relay and server not supported on Linux 2.0 kernels");
    }
    strcpy(sa.sa_data, conn->ifName);
    if (sendto(sock, pkt, size, 0, &sa, sizeof(sa)) < 0) {
	sysErr("sendto (sendPacket)");
	return -1;
    }

#endif
    return 0;
}

开发者ID:vilpalu，项目名称:GPL_2.6.31，代码行数:40，代码来源:if.c

示例4: getHWaddr

/**********************************************************************
*%FUNCTION: getHWaddr
*%ARGUMENTS:
* ifname -- name of interface
* hwaddr -- buffer for ehthernet address
*%RETURNS:
* Nothing
*%DESCRIPTION:
* Locates the Ethernet hardware address for an interface.
***********************************************************************/
void
getHWaddr(int sock, char const *ifname, unsigned char *hwaddr)
{
    char inbuf[8192];
    const struct sockaddr_dl *sdl;
    struct ifconf ifc;
    struct ifreq ifreq, *ifr;
    int i;
    int found = 0;

    ifc.ifc_len = sizeof(inbuf);
    ifc.ifc_buf = inbuf;
    if (ioctl(sock, SIOCGIFCONF, &ifc) < 0) {
	fatalSys("SIOCGIFCONF");
    }
    ifr = ifc.ifc_req;
    ifreq.ifr_name[0] = '\0';
    for (i = 0; i < ifc.ifc_len; ) {
	ifr = (struct ifreq *)((caddr_t)ifc.ifc_req + i);
	i += sizeof(ifr->ifr_name) +
		    (ifr->ifr_addr.sa_len > sizeof(struct sockaddr)
		    ? ifr->ifr_addr.sa_len
		    : sizeof(struct sockaddr));
	if (ifr->ifr_addr.sa_family == AF_LINK) {
	    sdl = (const struct sockaddr_dl *) &ifr->ifr_addr;
	    if ((sdl->sdl_type == IFT_ETHER) &&
	        (sdl->sdl_alen == ETH_ALEN) &&
		!strncmp(ifname, ifr->ifr_name, sizeof(ifr->ifr_name))) {
		if (found) {
		    char buffer[256];
		    sprintf(buffer, "interface %.16s has more than one ethernet address", ifname);
		    rp_fatal(buffer);
		} else {
		    found = 1;
	            memcpy(hwaddr, LLADDR(sdl), ETH_ALEN);
		}
	    }
	}
    }
    if (!found) {
	char buffer[256];
        sprintf(buffer, "interface %.16s has no ethernet address", ifname);
	rp_fatal(buffer);
    }
    test_func();
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:56，代码来源:if.c

示例5: strgetmsg

void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller)
{
	int     rc;
	static  char    errmsg[80];

	(void) signal(SIGALRM, sigalrm);
	if (alarm(MAXWAIT) < 0) {
		(void) sprintf(errmsg, "%s:  alarm", caller);
		fatalSys(errmsg);
	}

	*flagsp = 0;
	if ((rc = getmsg(fd, ctlp, datap, flagsp)) < 0) {
		(void) sprintf(errmsg, "%s:  getmsg", caller);
		fatalSys(errmsg);
	}

	if (alarm(0) < 0) {
		(void) sprintf(errmsg, "%s:  alarm", caller);
		fatalSys(errmsg);
	}

	if ((rc & (MORECTL | MOREDATA)) == (MORECTL | MOREDATA)) {
		char buffer[256];
		sprintf(buffer, "%s:  MORECTL|MOREDATA", caller);
		rp_fatal(buffer);
	}

	if (rc & MORECTL) {
		char buffer[256];
		sprintf(buffer, "%s:  MORECTL", caller);
		rp_fatal(buffer);
	}

	if (rc & MOREDATA) {
		char buffer[256];
		sprintf(buffer, "%s:  MOREDATA", caller);
		rp_fatal(buffer);
	}

	if (ctlp->len < sizeof (long)) {
		char buffer[256];
		sprintf(buffer, "getmsg:  control portion length < sizeof (long):  %d", ctlp->len);
		rp_fatal(buffer);
	}
}

开发者ID:qtekfun，项目名称:htcDesire820Kernel，代码行数:46，代码来源:if.c

示例6: expecting

void expecting(int prim, union DL_primitives *dlp)
{
        if (dlp->dl_primitive != (u_long)prim) {
		char buffer[256]; 
		sprintf(buffer, "expected %s got %s", dlprim(prim), dlprim(dlp->dl_primitive));
		rp_fatal(buffer); 
		exit(1); 
	}
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:9，代码来源:if.c

示例7: discovery

/**********************************************************************
*%FUNCTION: discovery
*%ARGUMENTS:
* conn -- PPPoE connection info structure
*%RETURNS:
* Nothing
*%DESCRIPTION:
* Performs the PPPoE discovery phase
***********************************************************************/
void
discovery(PPPoEConnection *conn)
{
    int padiAttempts;
    int padrAttempts;
    int timeout = conn->discoveryTimeout;

    /* Skip discovery? */
    if (conn->skipDiscovery) {
	conn->discoveryState = STATE_SESSION;
	if (conn->killSession) {
	    sendPADT(conn, "RP-PPPoE: Session killed manually");
	    exit(0);
	}
	return;
    }

  SEND_PADI:
    padiAttempts = 0;
    do {
#ifdef PLUGIN
	if (got_sigterm || got_sighup) return;
#endif
	padiAttempts++;
	if (padiAttempts > MAX_PADI_ATTEMPTS) {
	    if (persist) {
		padiAttempts = 0;
		timeout = conn->discoveryTimeout;
		printErr("Timeout waiting for PADO packets");
	    } else {
#ifdef PLUGIN
		printErr("Timeout waiting for PADO packets");
		return;
#else
		rp_fatal("Timeout waiting for PADO packets");
#endif
	    }
	}
	sendPADI(conn);
	conn->discoveryState = STATE_SENT_PADI;
	waitForPADO(conn, timeout);

	/* If we're just probing for access concentrators, don't do
	   exponential backoff.  This reduces the time for an unsuccessful
	   probe to 15 seconds. */
	if (!conn->printACNames) {
	    timeout *= 2;
	}
	if (conn->printACNames && conn->numPADOs) {
	    break;
	}
    } while (conn->discoveryState == STATE_SENT_PADI);

    /* If we're only printing access concentrator names, we're done */
    if (conn->printACNames) {
	exit(0);
    }

    timeout = conn->discoveryTimeout;
    padrAttempts = 0;
    do {
#ifdef PLUGIN
	if (got_sigterm || got_sighup) return;
#endif
	padrAttempts++;
	if (padrAttempts > MAX_PADI_ATTEMPTS) {
	    if (persist) {
		padrAttempts = 0;
		timeout = conn->discoveryTimeout;
		printErr("Timeout waiting for PADS packets");
		/* Go back to sending PADI again */
		goto SEND_PADI;
	    } else {
#ifdef PLUGIN
		printErr("Timeout waiting for PADS packets");
		return;
#else
		rp_fatal("Timeout waiting for PADS packets");
#endif
	    }
	}
	sendPADR(conn);
	conn->discoveryState = STATE_SENT_PADR;
	waitForPADS(conn, timeout);
	timeout *= 2;
    } while (conn->discoveryState == STATE_SENT_PADR);

#ifdef PLUGIN
    if (!conn->seenMaxPayload) {
	/* RFC 4638: MUST limit MTU/MRU to 1492 */
	if (lcp_allowoptions[0].mru > ETH_PPPOE_MTU) lcp_allowoptions[0].mru = ETH_PPPOE_MTU;
//.........这里部分代码省略.........

开发者ID:Einheri，项目名称:wl500g，代码行数:101，代码来源:discovery.c

示例8: strgetmsg

void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller)
{
        int     rc;
        static  char    errmsg[80];

        /*
         * Start timer.
         */
        (void) signal(SIGALRM, sigalrm);
        if (alarm(MAXWAIT) < 0) {
                (void) sprintf(errmsg, "%s:  alarm", caller);
                fatalSys(errmsg);
        }

        /*
         * Set flags argument and issue getmsg().
         */
        *flagsp = 0;
        if ((rc = getmsg(fd, ctlp, datap, flagsp)) < 0) {
                (void) sprintf(errmsg, "%s:  getmsg", caller);
                fatalSys(errmsg);
        }

        /*
         * Stop timer.
         */
        if (alarm(0) < 0) {
                (void) sprintf(errmsg, "%s:  alarm", caller);
                fatalSys(errmsg);
        }

        /*
         * Check for MOREDATA and/or MORECTL.
         */
        if ((rc & (MORECTL | MOREDATA)) == (MORECTL | MOREDATA)) {
		char buffer[256]; 
		sprintf(buffer, "%s:  MORECTL|MOREDATA", caller);
		rp_fatal(buffer);
	}
                
        if (rc & MORECTL) {
		char buffer[256];
		sprintf(buffer, "%s:  MORECTL", caller);
		rp_fatal(buffer); 
	}
        
        if (rc & MOREDATA) {
		char buffer[256]; 
		sprintf(buffer, "%s:  MOREDATA", caller);
		rp_fatal(buffer);
	}

        /*
         * Check for at least sizeof (long) control data portion.
         */
        if (ctlp->len < sizeof (long)) {
		char buffer[256]; 
		sprintf(buffer, "getmsg:  control portion length < sizeof (long):  %d", ctlp->len);
		rp_fatal(buffer); 
	}
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:61，代码来源:if.c

示例9: discovery

/**********************************************************************
*%FUNCTION: discovery
*%ARGUMENTS:
* conn -- PPPoE connection info structure
*%RETURNS:
* Nothing
*%DESCRIPTION:
* Performs the PPPoE discovery phase
***********************************************************************/
void
discovery(PPPoEConnection *conn)
{
    int padiAttempts = 0;
    int padrAttempts = 0;
    int timeout = PADI_TIMEOUT;

    /* Skip discovery and don't open discovery socket? */
    if (conn->skipDiscovery && conn->noDiscoverySocket) {
	conn->discoveryState = STATE_SESSION;
	return;
    }

    conn->discoverySocket =
	openInterface(conn->ifName, Eth_PPPOE_Discovery, conn->myEth);

    /* Skip discovery? */
    if (conn->skipDiscovery) {
	conn->discoveryState = STATE_SESSION;
	if (conn->killSession) {
	    sendPADT(conn, "RP-PPPoE: Session killed manually");
	    exit(0);
	}
	return;
    }

    do {
	padiAttempts++;
	if (padiAttempts > MAX_PADI_ATTEMPTS) {
		system("rm /etc/ppp/connectfile");
	    rp_fatal("Timeout waiting for PADO packets0");
	}
	sendPADI(conn);
	conn->discoveryState = STATE_SENT_PADI;
	waitForPADO(conn, timeout);


#if 0 // RexHua to Reduce connect time
        /* If we're just probing for access concentrators, don't do
           exponential backoff.  This reduces the time for an unsuccessful
           probe to 15 seconds. */
        if (!conn->printACNames) {
            timeout *= 2;
        }
#endif


	if (conn->printACNames && conn->numPADOs) {
	    break;
	}
    } while (conn->discoveryState == STATE_SENT_PADI);

    /* If we're only printing access concentrator names, we're done */
    if (conn->printACNames) {
	printf("--------------------------------------------------\n");
	exit(0);
    }

    timeout = PADI_TIMEOUT;
    do {
	padrAttempts++;
	if (padrAttempts > MAX_PADI_ATTEMPTS) {
	    rp_fatal("Timeout waiting for PADS packets");
	}
	sendPADR(conn);
	conn->discoveryState = STATE_SENT_PADR;
	waitForPADS(conn, timeout);
#if 0 // RexHua to Reduce connect time
        timeout *= 2;
#endif
    } while (conn->discoveryState == STATE_SENT_PADR);

    /* We're done. */
    conn->discoveryState = STATE_SESSION;
    return;
}

开发者ID:froggatt，项目名称:edimax-br-6528n，代码行数:85，代码来源:discovery.c

示例10: openInterface

int
openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
{
    static int fd = -1;
    char bpfName[32];
    u_int optval;
    struct bpf_version bpf_ver;
    struct ifreq ifr;
    int sock;
    int i;

    
    if (fd >= 0) {
	return fd;
    }

    
    for (i = 0; i < 256; i++) {
	sprintf(bpfName, "/dev/bpf%d", i);
	if (((fd = open(bpfName, O_RDWR, 0)) >= 0) ||
	    (errno != EBUSY)) {
	    break;
	}
    }
    if (fd < 0) {
	switch (errno) {
	case EACCES:		
	    {
		char buffer[256];
		sprintf(buffer, "Cannot open %.32s -- pppoe must be run as root.", bpfName);
		rp_fatal(buffer);
	    }
	    break;
	case EBUSY:
	case ENOENT:		
	    if (i == 0) {
		rp_fatal("No /dev/bpf* devices (check your kernel configuration for BPF support)");
	    } else {
		rp_fatal("All /dev/bpf* devices are in use");
	    }
	    break;
	}
	fatalSys(bpfName);
    }

    if ((sock = socket(AF_LOCAL, SOCK_DGRAM, 0)) < 0) {
	fatalSys("socket");
    }

    
    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
    if (ioctl(sock, SIOCGIFFLAGS, &ifr) < 0) {
	fatalSys("ioctl(SIOCGIFFLAGS)");
    }
    if ((ifr.ifr_flags & IFF_UP) == 0) {
	char buffer[256];
	sprintf(buffer, "Interface %.16s is not up", ifname);
	rp_fatal(buffer);
    }

    
    if (hwaddr == NULL) {
	rp_fatal("openInterface: no hwaddr arg.");
    }
    getHWaddr(sock, ifname, hwaddr);
    initFilter(fd, type, hwaddr);

    
#if !defined(__OpenBSD__)
    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
    if (ioctl(sock, SIOCGIFMTU, &ifr) < 0) {
	fatalSys("ioctl(SIOCGIFMTU)");
    }
    if (ifr.ifr_mtu < ETH_DATA_LEN) {
	char buffer[256];
	sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d.  You may have serious connection problems.",
		ifname, ifr.ifr_mtu, ETH_DATA_LEN);
	printErr(buffer);
    }
#endif

    
    if (close(sock) < 0) {
	fatalSys("close");
    }

    
    if (ioctl(fd, BIOCVERSION, &bpf_ver) < 0) {
	fatalSys("ioctl(BIOCVERSION)");
    }
    if ((bpf_ver.bv_major != BPF_MAJOR_VERSION) ||
	(bpf_ver.bv_minor < BPF_MINOR_VERSION)) {
	char buffer[256];
	sprintf(buffer, "Unsupported BPF version: %d.%d (kernel: %d.%d)",
			BPF_MAJOR_VERSION, BPF_MINOR_VERSION,
			bpf_ver.bv_major, bpf_ver.bv_minor);
	rp_fatal(buffer);
    }

    
//.........这里部分代码省略.........

开发者ID:qtekfun，项目名称:htcDesire820Kernel，代码行数:101，代码来源:if.c

示例11: discovery

/**********************************************************************
*%FUNCTION: discovery
*%ARGUMENTS:
* conn -- PPPoE connection info structure
*%RETURNS:
* Nothing
*%DESCRIPTION:
* Performs the PPPoE discovery phase
***********************************************************************/
void
discovery(PPPoEConnection *conn)
{
    int padiAttempts = 0;
    int padrAttempts = 0;
    int timeout = conn->discoveryTimeout;

    /* Skip discovery? */
    if (conn->skipDiscovery) {
	conn->discoveryState = STATE_SESSION;
	if (conn->killSession) {
	    sendPADT(conn, "RP-PPPoE: Session killed manually");
	    exit(0);
	}
	return;
    }

    do {
	padiAttempts++;
	if (padiAttempts > MAX_PADI_ATTEMPTS) {
	    if (persist) {
		padiAttempts = 0;
		timeout = conn->discoveryTimeout;
		printErr("Timeout waiting for PADO packets");
	    } else {
		rp_fatal("Timeout waiting for PADO packets");
	    }
	}
	sendPADI(conn);
	conn->discoveryState = STATE_SENT_PADI;
	waitForPADO(conn, timeout);

	/* If we're just probing for access concentrators, don't do
	   exponential backoff.  This reduces the time for an unsuccessful
	   probe to 15 seconds. */
	if (!conn->printACNames) {
	    timeout *= 2;
	}
	if (conn->printACNames && conn->numPADOs) {
	    break;
	}
    } while (conn->discoveryState == STATE_SENT_PADI);

    /* If we're only printing access concentrator names, we're done */
    if (conn->printACNames) {
	exit(0);
    }

    timeout = conn->discoveryTimeout;
    do {
	padrAttempts++;
	if (padrAttempts > MAX_PADI_ATTEMPTS) {
	    if (persist) {
		padrAttempts = 0;
		timeout = conn->discoveryTimeout;
		printErr("Timeout waiting for PADS packets");
	    } else {
		rp_fatal("Timeout waiting for PADS packets");
	    }
	}
	sendPADR(conn);
	conn->discoveryState = STATE_SENT_PADR;
	waitForPADS(conn, timeout);
	timeout *= 2;
    } while (conn->discoveryState == STATE_SENT_PADR);

    /* We're done. */
    conn->discoveryState = STATE_SESSION;
    return;
}

开发者ID:0xFA-Team，项目名称:OpenKeeper，代码行数:79，代码来源:discovery.c

示例12: sendPacket

/***********************************************************************
*%FUNCTION: sendPacket
*%ARGUMENTS:
* sock -- socket to send to
* pkt -- the packet to transmit
* size -- size of packet (in bytes)
*%RETURNS:
* 0 on success; -1 on failure
*%DESCRIPTION:
* Transmits a packet
***********************************************************************/
int
sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size)
{
#if defined(USE_BPF)
    if (write(sock, pkt, size) < 0) {
	sysErr("write (sendPacket)");
	return -1;
    }
#elif defined(HAVE_STRUCT_SOCKADDR_LL)
    if (send(sock, pkt, size, 0) < 0) {
	sysErr("send (sendPacket)");
	return -1;
    }
#else
#ifdef USE_DLPI

#define ABS(x)          ((x) < 0 ? -(x) : (x))

	u_char  addr[MAXDLADDR];
	u_char  phys[MAXDLADDR];
	u_char  sap[MAXDLADDR];
	u_char    xmitbuf[MAXDLBUF];
	int	data_size;

	short	tmp_sap;

	tmp_sap = htons(pkt->ethHdr.h_proto); 
	data_size = size - sizeof(struct ethhdr); 

	memcpy((char *)phys, (char *)pkt->ethHdr.h_dest, ETHERADDRL);
	memcpy((char *)sap,  (char *)&tmp_sap, sizeof(ushort_t));
	memcpy((char *)xmitbuf, (char *)pkt + sizeof(struct ethhdr), data_size); 

	if (dl_saplen > 0) {  /* order is sap+phys */
		(void) memcpy((char*)addr, (char*)&sap, dl_abssaplen);
		(void) memcpy((char*)addr+dl_abssaplen, (char*)phys, ETHERADDRL);
	} else {        /* order is phys+sap */
		(void) memcpy((char*)addr, (char*)phys, ETHERADDRL);
		(void) memcpy((char*)addr+ETHERADDRL, (char*)&sap, dl_abssaplen);
	}

#ifdef DL_DEBUG
	printf("%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x\n", 
		addr[0],addr[1],addr[2],addr[3],addr[4],addr[5],
		addr[6],addr[7]);
#endif

	dlunitdatareq(sock, addr, dl_addrlen, 0, 0, xmitbuf, data_size);



#else
    struct sockaddr sa;

    if (!conn) {
	rp_fatal("relay and server not supported on Linux 2.0 kernels");
    }
    strcpy(sa.sa_data, conn->ifName);
    if (sendto(sock, pkt, size, 0, &sa, sizeof(sa)) < 0) {
	sysErr("sendto (sendPacket)");
	return -1;
    }
#endif
#endif
    return 0;
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:77，代码来源:if.c

示例13: sigalrm

void sigalrm(int sig)
{
        (void) rp_fatal("sigalrm:  TIMEOUT");
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:4，代码来源:if.c

示例14: sysErr

void sysErr(char const *str)
{
    rp_fatal(str);
}

开发者ID:AllardJ，项目名称:Tomato，代码行数:4，代码来源:pppoe-discovery.c

注：本文中的rp_fatal函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rpal_memory_isValid函数代码示例发布时间：2022-05-30

C++ rp函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19174|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9985|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9654|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8621|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rp_fatal函数代码示例

示例1: dlbindack

示例2: openInterface

示例3: sendPacket

示例4: getHWaddr

示例5: strgetmsg

示例6: expecting

示例7: discovery

示例8: strgetmsg

示例9: discovery

示例10: openInterface

示例11: discovery

示例12: sendPacket

示例13: sigalrm

示例14: sysErr

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2366

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053