• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ rk28printk函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rk28printk函数的典型用法代码示例。如果您正苦于以下问题：C++ rk28printk函数的具体用法？C++ rk28printk怎么用？C++ rk28printk使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rk28printk函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rkusb_function_call_callback

/*
 * 20100111,[email protected],use LUN to dicide call at task or irq.
 * lun==0: at irq , other at task.
 */
static int rkusb_function_call_callback( struct rkusb_dev *dev )
{
         int     ret;
         rk28printk("%s::cmd=%s,crash=%d\n" , __func__ , (char*) dev->req_out->buf , rk28_system_crash );
         if( !__rkusb_write_enable() ) {
                //if( !strcmp((char*) dev->req_out->buf , rkusb_en_read) ) {
                //        rk28_system_crash = 2;
                //        rkusb_send_csw_result( dev , rk28_system_crash);
                //        return RKUSB_CB_OK_NONE;
                //}
                if( !strcmp((char*) dev->req_out->buf , rkusb_en_write) ) {
                        rk28_system_crash = RKDBG_WRITE;
                        rkusb_send_csw_result( dev , rk28_system_crash);
                        return RKUSB_CB_OK_NONE;
                }
                return RKUSB_CB_FAILD;
        }
        if( DEV_LUN(dev) == 0 ) {
                ret = __rk28_scu_parse_cmd((char*) dev->req_out->buf);
                rk28printk("cmd ret = 0x%x(%d)" , ret ,ret );
                rkusb_send_csw_result( dev , ret );
        } else {
                rkusb_wakeup_thread( dev );
        }
        return RKUSB_CB_OK_NONE;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:30，代码来源:rk28_usb.c


示例2: GetFirmwareInformation

// ================================================================================
// Function Name --- GetFirmwareInformation
// Description --- Get firmware information
// Input --- NULL
//Output --- return true if the command execute successfully, otherwuse return false.
// ================================================================================
bool GetFirmwareInformation(struct i2c_client *client)
{
	u8 ucWriteLength, ucReadLength;
	u8 pucData[128];
	u8 ucQuery;
int i;
	ucWriteLength = 2;
	ucReadLength = 0x09;
	pucData[0] = 0x01;
	pucData[1] = 0x00;

	// Query
	do
	{
		if(!ReadQueryBuffer(client, &ucQuery))
		{
			ucQuery = QUERY_BUSY;
		}
	}while(ucQuery & QUERY_BUSY);

	// Write Command
	if(!WriteCommandBuffer(client, pucData, ucWriteLength))
	{
		return false;
	}

	// Query
	do
	{
		if(!ReadQueryBuffer(client, &ucQuery))
		{
			ucQuery = QUERY_BUSY;
		}
	}while(ucQuery & QUERY_BUSY);
	pucData[5]= 0 ;
	 pucData[6]= 0 ;
	 pucData[7]= 0 ;
	 pucData[8]= 0;
	// Read Command Response
	if(!ReadCommandResponseBuffer(client, pucData, ucReadLength))
	{
		return false;
	}


	
for (i =0;i<ucReadLength;i++)
	rk28printk("GetFirmwareInformation pucData[%d]=%d \r\n",i,pucData[i]);
	if(pucData[5]== 0 
	&& pucData[6] == 0 
	&& pucData[7] == 0 
	&& pucData[8] == 0) 
	{
		// There is no flash code
		rk28printk("There is no flash code \r\n");
		return false;
	}

	return true;
}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:66，代码来源:ctp_it7250.c


示例3: rk28_AD_irq_handler

//[email protected]
static irqreturn_t rk28_AD_irq_handler(s32 irq, void *dev_id)
{
	rk28printk("\n =================================rk28_AD_irq_handler===================================\n");

    rk28printk("========= pm_sleep_status=%d   PA0=%d\n", pm_sleep_status, GPIOGetPinLevel(WAKEUP_KEY_PORT));
    
   if( pm_sleep_status == 1)
    {
        g_wake_press = !GPIOGetPinLevel(WAKEUP_KEY_PORT);
        rk28printk("========== in sleep: g_wakeup_key_enable=%d  g_wake_press=%d\n", g_wakeup_key_enable, g_wake_press);
        if(g_wakeup_key_enable)
        {
        	input_report_key(prockAD_button->input_dev,AD1KEY5,1);
        	input_sync(prockAD_button->input_dev);
        	input_report_key(prockAD_button->input_dev,AD1KEY5,0);
        	input_sync(prockAD_button->input_dev);
        	
        	printk("\n%s^^level 2^^Wake Up ^^^^^!!\n",__FUNCTION__);

            g_wakeup_key_enable = 0;

            // [email protected]: 只有在5S后，或者系统被唤醒后(pm_sleep_status == 1)，才能再处理唤醒IRQ
        	setup_timer(&g_wakeup_key_timer, rk28_enable_wakeup_key, (unsigned long)0);
        	g_wakeup_key_timer.expires  = jiffies + (5*HZ);
        	add_timer(&g_wakeup_key_timer);
        }
    }
    return IRQ_HANDLED;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:30，代码来源:rk28_mid_ipad.c


示例4: Ctp_it7250_tx_data

static int Ctp_it7250_tx_data(struct i2c_client *client, u8 reg,char *txData, int length)
{
#if 0
    int ret,i;
	struct i2c_adapter *adap = client->adapter;
	struct i2c_msg msg;
	
	u8 buf[128];//128
//	rk28printk("reg=0x%x txData=0x%x  \r\n",reg,*txData);
	buf[0]=reg;
	for (i=0;i<length;i++)
		{
		buf[i+1]=*txData++;
		rk28printk("buf[%d]=0x%x   ",i+1,buf[i+1]);
		}
	rk28printk("\r\n");
//	rk28printk("buf[0]=0x%x buf[1]=0x%x",buf[0],buf[1]);
	msg.addr = client->addr;
//rk28printk("i2c addr=0x%x",msg.addr);
	msg.buf =&buf[0];
	msg.len = length+1;//+1 means add the reg length;by roberts
	msg.flags = client->flags;
	msg.scl_rate = 400*1000;
    
	ret = i2c_transfer(adap, &msg, 1);
return ret;
#else
 return i2c_master_reg8_send(client, reg, txData, length, 400 * 1000);
#endif




}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:34，代码来源:ctp_it7250.c


示例5: rkusb_init

/*
*  init call at msc or adb set alt.use buf_length to distinguish.
*  adb first!
* __attribute__((weak))
*/
int  rkusb_init(struct rkusb_dev_fsg* dev , struct usb_ep* in_ep , 
        struct usb_ep* out_ep , int fsg )
{
        if( !dev ) {
                rk28printk("%s::clear rkusb\n" , __func__ );
                rkusb_reinit_req(_rkusb_dev,NULL,out_ep);
                _rkusb_dev->ep_in = NULL;
                return 0;
        }
        rk28printk("%s::init rkusb,fsg=%d\n" , __func__ , fsg );
        dev->usb_out = NULL;
        /*
         * 4 init case :
         * 0: only fsg , 1:only adb , 2:fsg first,adb second , 3:adb first,fsg second.
         * we want:if have adb,select adb ,then select fsg.
        */
        if( !_rkusb_dev->ep_in ||  fsg == 0) {
                if( _rkusb_dev->fsg_dev ) 
                        _rkusb_dev->fsg_dev->usb_out_bak = NULL;
                rkusb_reinit_req(_rkusb_dev,in_ep,out_ep);
                _rkusb_dev->fsg_dev = dev;
                _rkusb_dev->fsg = fsg;
                dev->usb_out_bak = rkusb_complete_out;
        }
        dev->rk_dev = _rkusb_dev;
        return 0;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:32，代码来源:rk28_usb.c


示例6: Ctp_it7250_init

static int __init Ctp_it7250_init(void)
{
	int ret;	
	rk28printk("+++++++     %s++\n", __FUNCTION__);
	ret=i2c_add_driver(&Ctp_it7250_driver);
	rk28printk("**Ctp_it7250_init_init return %d**\n",ret);
	return ret;
}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:8，代码来源:ctp_it7250.c


示例7: rk28_AD_irq_handler

//[email protected]
static irqreturn_t rk28_AD_irq_handler(s32 irq, void *dev_id)
{
	rk28printk("\n =================================rk28_AD_irq_handler===================================\n");

   if( rk28_pm_status == 1)
    {
    	input_report_key(prockAD_button->input_dev,AD1KEY5,1);
    	input_sync(prockAD_button->input_dev);
    	input_report_key(prockAD_button->input_dev,AD1KEY5,0);
    	input_sync(prockAD_button->input_dev);
	g_wake =1;
    }
	rk28printk("\n%s^^^^Wake Up ^^^^^!!\n",__FUNCTION__);
    return IRQ_HANDLED;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:16，代码来源:rk28_mid_ipady1006oldv7.c


示例8: ts_input_init

static int ts_input_init(struct i2c_client *client)
{
	int ret = -1,i;
	struct Ctp_it7250_data *Ctp_it7250;
	Ctp_it7250 = i2c_get_clientdata(client);
	/* register input device */
	Ctp_it7250->input_dev = input_allocate_device();
	if (Ctp_it7250->input_dev == NULL) {
		pr_emerg( "%s: failed to allocate input dev\n",
			__FUNCTION__);
		return -ENOMEM;
	}
rk28printk("+++++++     %s+++++++\n", __FUNCTION__);
	Ctp_it7250->input_dev->name = "CTS_Ctp_it7250";
	Ctp_it7250->input_dev->phys = "CTS_Ctp_it7250/input1";
	Ctp_it7250->input_dev->dev.parent = &client->dev;
     //no need to open & close it,it will do it automaticlly;noted by robert
	Ctp_it7250->input_dev->open = Ctp_it7250_touch_open;
	Ctp_it7250->input_dev->close = Ctp_it7250_touch_close;

	__set_bit(EV_ABS, Ctp_it7250->input_dev->evbit);
	__set_bit(ABS_X, Ctp_it7250->input_dev->absbit);
	__set_bit(ABS_Y, Ctp_it7250->input_dev->absbit);

	__set_bit(EV_SYN, Ctp_it7250->input_dev->evbit);
	__set_bit(EV_KEY, Ctp_it7250->input_dev->evbit);
	__set_bit(BTN_TOUCH, Ctp_it7250->input_dev->keybit);

for (i = 0; i < ARRAY_SIZE(panel_key_info); i++)
{rk28printk("ts_input_init  i=%d\r\n",i);
	__set_bit(panel_key_info[i].key,Ctp_it7250->input_dev->keybit);
}
	//__clear_bit(0, input_dev->keybit);

	input_set_abs_params(Ctp_it7250->input_dev, ABS_X, 0, 1000, 0, 0);
	input_set_abs_params(Ctp_it7250->input_dev, ABS_Y, 0, 1000, 0, 0);
//pr_emerg("+++++++ %s\n", __FUNCTION__); 
	ret = input_register_device(Ctp_it7250->input_dev);
	if (ret) {
		pr_emerg(
			"%s: unabled to register input device, ret = %d\n",
			__FUNCTION__, ret);
		return ret;
	}
	rk28printk("+++++++     %s+++++++END\n", __FUNCTION__);
	return 0;

}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:48，代码来源:ctp_it7250.c


示例9: mma7660_get_data

static int mma7660_get_data(struct i2c_client *client)
{
	char buffer[3];
	int ret;
	int x, y, z;
    struct mma7660_axis axis;
    struct mma8452_platform_data *pdata = client->dev.platform_data;
    do {
        memset(buffer, 0, 3);
        buffer[0] = MMA7660_REG_X_OUT;
        ret = mma7660_rx_data(client, &buffer[0], 3);
        if (ret < 0)
            return ret;
    } while ((buffer[0] & 0x40) || (buffer[1] & 0x40) || (buffer[2] & 0x40));

	x =  mma7660_convert_to_int(buffer[MMA7660_REG_Y_OUT])*YSENSIT;
	y =  mma7660_convert_to_int(buffer[MMA7660_REG_X_OUT])*XSENSIT;
	z =  mma7660_convert_to_int(buffer[MMA7660_REG_Z_OUT])*ZSENSIT;

#if defined(CONFIG_MACH_RK29_ODYS_NEOX8)
	axis.x = x;
	axis.y = -z;
	axis.z = y;
#elif defined(CONFIG_MACH_RK29_ODYS_NEOX7)
	axis.x = -x;
	axis.y = -z;
	axis.z = -y;
#elif  defined(CONFIG_MACH_ODYS_LOOX_PLUS) || defined(CONFIG_MACH_ODYS_NEXT)
	axis.x = x;
	axis.y = z;
	axis.z = -y;
#else
	axis.x = y;
	axis.y = -x;
	axis.z = z;
#endif

	//	printk("l=%-4d,x=%-5d, y=%-5d, z=%-5d. %s:\n",__LINE__,axis.x, axis.y, axis.z, __func__);
	//	printk("%s: x=%-5d, y=%-5d, z=%-d\n",__func__, axis.x, axis.y, axis.z);
		mma7660_report_value(client, &axis);
	//	Xaverage = Yaverage = Zaverage = 0;

	//����RawDataLength��ֵ��ƽ��ֵ
	Xaverage += axis.x;
	Yaverage += axis.y;
	Zaverage += axis.z;
    rk28printk( "%s: ------------------mma7660_GetData axis = %d  %d  %d,average=%d %d %d--------------\n",
           __func__, axis.x, axis.y, axis.z,Xaverage,Yaverage,Zaverage); 
	
	if((++RawDataNum)>=RawDataLength){
		RawDataNum = 0;
		axis.x = Xaverage/RawDataLength;
		axis.y = Yaverage/RawDataLength;
		axis.z = Zaverage/RawDataLength;
	    mma7660_report_value(client, &axis);
		Xaverage = Yaverage = Zaverage = 0;
	}

	return 0;
}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:60，代码来源:mma7660.c


示例10: rkusb_shell_log_write

/*
 *   return : = count ok, else failed 
 */
static int rkusb_shell_log_write( struct log_buffer *p , char *buf, int count )
{
        char *pt = buf;
        struct tty_struct *tty_s = (struct tty_struct *)p->private_data;
        int     i = 0;
        int flag = TTY_NORMAL;

        buf[count] = 0;
        rk28printk("%s:log=%s,buf=%s,count=%d,tty_s=0x%p\n" ,__func__ , p->name , pt , count , tty_s );
        if( !tty_s ) {
                return 0;
        }
        #if 0 /* add at pc tools */
        if ( buf[count-1]  != '\n' ) {
                buf[count++] = '\n';
                buf[count] = 0;
        }
        #endif
                
        while( *pt && i < count ) {
                tty_insert_flip_char(tty_s, *pt , flag);
                pt++;
                i++;
        }
        tty_flip_buffer_push( tty_s );
        p->property |= LOG_PROT_MAYWRITE;
        return count;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:31，代码来源:rk28_usb.c


示例11: rkusb_get_symbol

static int rkusb_get_symbol( struct rkusb_dev *dev )
{
        switch ( DEV_FUNC(dev) ) {
        case FUNC_GSYM_KERNEL:
                return rkusb_get_kernel_symbols( dev );
        case FUNC_GSYM_GETTASKS:
                return rksub_get_sym_tasks( dev );
        case FUNC_GSYM_GETTASKVM:
                return rkusb_get_task_mm( dev );
        case FUNC_GSYM_PROFILE:
                {
                char * buf = __rkusb_rwbuffer_start(dev);
                PROFILE_INFO   pe;
                pe.size = sizeof( pe );
                pe.npc = profile_check( buf );
                pe.buf = (unsigned long)buf;
                pe.now = ktime_to_ns( ktime_get() );
                rk28printk("%s::profile n=%ld\n" , __func__ , pe.npc );
                rkusb_normal_data_xfer_onetime( dev , &pe );
                return 0;
                }
        default:
                break;
        }
        return RKUSB_CB_FAILD;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:26，代码来源:rk28_usb.c


示例12: rkusb_get_kernel_symbols

static int rkusb_get_kernel_symbols( struct rkusb_dev *dev )
{
        struct __kernel_symbol ks;
        ks.size = sizeof( ks );
        ks._stext = _stext;
        ks._text = _text;
        ks._etext = _etext;
        ks._data = __data_start ; //_data;
        ks._edata = _edata;
        ks.__bss_start = __bss_start;
        ks._end = _end;

        ks.kallsyms_start = (unsigned char*)kallsyms_addresses;
        ks.total_syms_size = (unsigned char*)__start_rodata - ks.kallsyms_start;
        ks._kallsyms_num_syms = kallsyms_num_syms;
        ks._kallsyms_addresses = (unsigned long*)kallsyms_addresses;
        ks._kallsyms_markers = (unsigned long*)kallsyms_markers;
        ks._kallsyms_names = (unsigned char*)kallsyms_names;
        ks._kallsyms_token_index = (unsigned short*)kallsyms_token_index;
        ks._kallsyms_token_table = (unsigned char*)kallsyms_token_table;
        rkusb_normal_data_xfer_onetime( dev , &ks );
        rk28printk("symbols addres=0x%p,names=0x%p,syms=0x%lx\n",
                ks._kallsyms_addresses,ks._kallsyms_names,ks._kallsyms_num_syms);
        return RKUSB_CB_OK_NONE;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:25，代码来源:rk28_usb.c


示例13: CaptouchHWInitial

// *******************************************************************************************
// Function Name: CaptouchHWInitial
// Description: 
//   This function is mainly used to initialize cap-touch controller to active state.
// Parameters: NULL
// Return value: 
//   return zero if success, otherwise return non zero value
// *******************************************************************************************
int CaptouchHWInitial(struct i2c_client *client)
{
	u32 wXResolution=0,wYResolution=0;
	u8 ucStep=0;
	if (!IdentifyCapSensor(client))
	{
		rk28printk("%s IdentifyCapSensor error \r\n",__FUNCTION__);
		printk("%s IdentifyCapSensor error \r\n",__FUNCTION__);
		return false;
		//goto resetagin;
}
	#if 1
if (!GetFirmwareInformation (client))
	{
	rk28printk("%s GetFirmwareInformation error \r\n",__FUNCTION__);
	printk("%s GetFirmwareInformation error \r\n",__FUNCTION__);
	//	goto resetagin;
}

	if (!Get2DResolutions(client, &wXResolution, &wYResolution, &ucStep))
	{
	rk28printk("%s Get2DResolutions error \r\n",__FUNCTION__);
	printk("%s Get2DResolutions error \r\n",__FUNCTION__);
	//	goto resetagin;
}

//no need to set interrupt mode because firmware has done that;note by robert
	#if 0
	if (!SetInterruptNotification(client, 0x01, 0x00))
	{
	rk28printk("%s SetInterruptNotification error \r\n",__FUNCTION__);
	goto resetagin;
}
	#endif
	//note end
#endif
	return true;

#if 0
resetagin:
	if (!CaptouchReset(client))
		rk28printk("CaptouchReset success \r\n");
	mdelay(100);
	#endif
//	if (!CaptouchMode(client, 0x00))
	//	rk28printk("CaptouchMode success \r\n");
}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:55，代码来源:ctp_it7250.c


示例14: Ctp_it7250_probe

 static int  Ctp_it7250_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
	struct Ctp_it7250_data *Ctp_it7250;

	Ctp_it7250_client = client;
	rk28printk("+++++++     %s+++++++\n", __FUNCTION__);
	Ctp_it7250 = kzalloc(sizeof(struct Ctp_it7250_data), GFP_KERNEL);
	if (!Ctp_it7250) 
		{
		rk28printk("[Ctp_it7250_probe]:alloc data failed.\n");
		return  -ENOMEM;
		}

//	INIT_WORK(&Ctp_it7250->irq_work, Ctp_it7250_irq_worker);
	INIT_DELAYED_WORK(&Ctp_it7250->delaywork, Ctp_it7250_delaywork_func);

	Ctp_it7250->client = client;
	i2c_set_clientdata(client, Ctp_it7250);
	
	if (!CaptouchHWInitial(client))
		goto  err_free_mem;
	Ctp_it7250_init_irq(client);	
	ts_input_init(client);
//	CTS_configure_pin(client);

#if 0
	lp8725_lilo_en(2,0);
	mdelay(100);

	lp8725_lilo_en(2,1);
	mdelay(100);
	lp8725_set_lilo_vol(2,300);
	mdelay(5);
#endif

//不是查询模式，不需要轮询
//schedule_delayed_work(&Ctp_it7250->delaywork,msecs_to_jiffies(50));


	rk28printk("+++++++     %s+++++++\n", __FUNCTION__);
	return 0;
	err_free_mem:
 	kfree(Ctp_it7250);
	 return false;

}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:46，代码来源:ctp_it7250.c


示例15: rkusb_write_shell_callback

static int rkusb_write_shell_callback( struct rkusb_dev *dev )
{
        rk28printk("%s:actual len=%d\n" ,__func__ , dev->req_out->actual);
        
        if( dev->log[DEV_LUN(dev)].setlog( &dev->log[DEV_LUN(dev)] , dev->req_out->buf , dev->req_out->actual ) 
                >= dev->req_out->actual ) {
                return RKUSB_CB_OK_CSW;
        }
        return RKUSB_CB_FAILD_CSW;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:10，代码来源:rk28_usb.c


示例16: rkusb_set_log

/*
 *      write sdram, just send command to shell.
 */
static int rkusb_set_log( struct rkusb_dev *dev )
{
        rk28printk("%s:lun=%d,lba=0x%08x\n" ,__func__ , DEV_LUN(dev) , DEV_OFFSET(dev));
        if( DEV_LUN(dev) < dev->luns && (dev->log[DEV_LUN(dev)].property & LOG_PROT_WRITE )
                && !__system_crashed() ) {
                rkusb_normal_data_xfer( dev , rkusb_write_shell_callback );
                return RKUSB_CB_OK_NONE;
        } 
        return RKUSB_CB_FAILD;
}
开发者ID:Tigrouzen，项目名称:k1099，代码行数:13，代码来源:rk28_usb.c


示例17: Ctp_it7250_suspend

static int Ctp_it7250_suspend(struct i2c_client *client, pm_message_t state)
{//pr_emerg("\n irq1=%d \n",irq1);
	struct Ctp_it7250_data *Ctp_it7250 = (struct Ctp_it7250_data *)i2c_get_clientdata(client);

	rk28printk("%s\n",__func__);

	CaptouchMode(client, 2);
	disable_irq(Ctp_it7250->irq);

	return 0;
}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:11，代码来源:ctp_it7250.c



注：本文中的rk28printk函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ rk_UNCONST函数代码示例发布时间：2022-05-30
下一篇：
C++ rio_readlineb函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap