C++ rig_debug函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rig_debug函数的典型用法代码示例。如果您正苦于以下问题：C++ rig_debug函数的具体用法？C++ rig_debug怎么用？C++ rig_debug使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rig_debug函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: netrigctl_scan

static int netrigctl_scan(RIG *rig, vfo_t vfo, scan_t scan, int ch)
{
  int ret, len;
  char cmd[CMD_MAX];
  char buf[BUF_MAX];

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __FUNCTION__);

  len = sprintf(cmd, "g %s %d\n", rig_strscan(scan), ch);

  ret = netrigctl_transaction(rig, cmd, len, buf);
  if (ret > 0)
	return -RIG_EPROTO;
  else
  	return ret;
}

开发者ID:jnse，项目名称:qtar8200，代码行数:16，代码来源:netrigctl.c

示例2: netrigctl_set_powerstat

static int netrigctl_set_powerstat(RIG *rig, powerstat_t status)
{
  int ret, len;
  char cmd[CMD_MAX];
  char buf[BUF_MAX];

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __FUNCTION__);

  len = sprintf(cmd, "\\set_powerstat %d\n", status);

  ret = netrigctl_transaction(rig, cmd, len, buf);
  if (ret > 0)
	return -RIG_EPROTO;
  else
  	return ret;
}

开发者ID:jnse，项目名称:qtar8200，代码行数:16，代码来源:netrigctl.c

示例3: netrigctl_set_bank

static int netrigctl_set_bank(RIG *rig, vfo_t vfo, int bank)
{
  int ret, len;
  char cmd[CMD_MAX];
  char buf[BUF_MAX];

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __FUNCTION__);

  len = sprintf(cmd, "B %d\n", bank);

  ret = netrigctl_transaction(rig, cmd, len, buf);
  if (ret > 0)
	return -RIG_EPROTO;
  else
  	return ret;
}

开发者ID:jnse，项目名称:qtar8200，代码行数:16，代码来源:netrigctl.c

示例4: ft817_send_icmd

/*
 * The same for incomplete commands.
 */
static int ft817_send_icmd(RIG *rig, int index, unsigned char *data)
{
	struct ft817_priv_data *p = (struct ft817_priv_data *) rig->state.priv;
	unsigned char cmd[YAESU_CMD_LENGTH];

	if (p->pcs[index].ncomp == 1) {
		rig_debug(RIG_DEBUG_VERBOSE, "ft817: Complete sequence\n");
		return -RIG_EINTERNAL;
	}

	cmd[YAESU_CMD_LENGTH - 1] = p->pcs[index].nseq[YAESU_CMD_LENGTH - 1];
	memcpy(cmd, data, YAESU_CMD_LENGTH - 1);

	write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
	return ft817_read_ack(rig);
}

开发者ID:8cH9azbsFifZ，项目名称:arduino_ft817，代码行数:19，代码来源:ft817.c

示例5: par_unlock

/**
 * \brief Release lock on Parallel Port
 * \param port
 * \return RIG_OK or < 0
 */
int HAMLIB_API par_unlock(hamlib_port_t *port)
{
#ifdef HAVE_LINUX_PPDEV_H
	if (ioctl(port->fd, PPRELEASE) < 0) {
		rig_debug(RIG_DEBUG_ERR, "Releasing device \"%s\": %s\n", port->pathname, strerror(errno));
		return -RIG_EIO;
	}
	return RIG_OK;
#elif defined(HAVE_DEV_PPBUS_PPI_H)
	return RIG_OK;
#elif defined(WIN32)
	return RIG_OK;
#else
	return -RIG_ENIMPL;
#endif
}

开发者ID:jnse，项目名称:qtar8200，代码行数:21，代码来源:parallel.c

示例6: mode_to_char

static char mode_to_char(rmode_t mode)
{
      switch (mode) {
         case RIG_MODE_CW:       return(MD_CW);
         case RIG_MODE_CWR:      return(MD_CWR);
         case RIG_MODE_USB:      return(MD_USB);
         case RIG_MODE_LSB:      return(MD_LSB);
         case RIG_MODE_FM:       return(MD_FM);
         case RIG_MODE_AM:       return(MD_AM);
         case RIG_MODE_RTTY:     return(MD_FSK);
         case RIG_MODE_RTTYR:    return(MD_FSKR);
	 default:
		rig_debug(RIG_DEBUG_WARN,"ts570_mode_to_char %s: unsupported mode %d\n", __func__,mode);
     }
 return(RIG_MODE_NONE);
}

开发者ID:jessicalh，项目名称:hamlib，代码行数:16，代码来源:ts570.c

示例7: ft817_init

int ft817_init (RIG *rig)
{
	struct ft817_priv_data *p;

	rig_debug (RIG_DEBUG_VERBOSE,"ft817: ft817_init called \n");

	if ((p = calloc(1, sizeof(struct ft817_priv_data))) == NULL)
		return -RIG_ENOMEM;

	/* Copy complete native cmd set to private cmd storage area */
	memcpy(p->pcs, ncmd, sizeof(ncmd));

	rig->state.priv = (void*) p;

	return RIG_OK;
}

开发者ID:8cH9azbsFifZ，项目名称:arduino_ft817，代码行数:16，代码来源:ft817.c

示例8: netrigctl_send_morse

static int netrigctl_send_morse(RIG *rig, vfo_t vfo, const char *msg)
{
  int ret, len;
  char cmd[CMD_MAX];
  char buf[BUF_MAX];

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __FUNCTION__);

  len = sprintf(cmd, "\\send_morse %s\n", msg);

  ret = netrigctl_transaction(rig, cmd, len, buf);
  if (ret > 0)
	return -RIG_EPROTO;
  else
  	return ret;
}

开发者ID:jnse，项目名称:qtar8200，代码行数:16，代码来源:netrigctl.c

示例9: netrigctl_vfo_op

static int netrigctl_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
{
  int ret, len;
  char cmd[CMD_MAX];
  char buf[BUF_MAX];

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __FUNCTION__);

  len = sprintf(cmd, "J %s\n", rig_strvfop(op));

  ret = netrigctl_transaction(rig, cmd, len, buf);
  if (ret > 0)
	return -RIG_EPROTO;
  else
  	return ret;
}

开发者ID:jnse，项目名称:qtar8200，代码行数:16，代码来源:netrigctl.c

示例10: rig_set_mem_all

/**
 * \brief set all channel and non-channel data
 * \param rig   The rig handle
 * \param chans Channel data
 * \param cfgps ??
 * \param vals  ??
 *
 * Writes the data associated with all the memory channels,
 * and rigs memory parameters.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 * \sa rig_get_mem_all(), rig_set_mem_all_cb()
 *
 * \todo set all parm's
 * \todo finish coding and testing of mem_all functions
 */
int HAMLIB_API rig_set_mem_all(RIG *rig,
                               const channel_t chans[],
                               const struct confparams cfgps[],
                               const value_t vals[])
{
    struct rig_caps *rc;
    int retval;
    struct map_all_s mem_all_arg;

    rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);

    if (CHECK_RIG_ARG(rig) || !chans || !cfgps || !vals)
    {
        return -RIG_EINVAL;
    }

    rc = rig->caps;
    mem_all_arg.chans = (channel_t *) chans;
    mem_all_arg.cfgps = cfgps;
    mem_all_arg.vals = (value_t *) vals;

    if (rc->set_mem_all_cb)
        return rc->set_mem_all_cb(rig, map_chan, map_parm,
                                  (rig_ptr_t)&mem_all_arg);

    /* if not available, emulate it */
    retval = rig_set_chan_all(rig, chans);

    if (retval != RIG_OK)
    {
        return retval;
    }

#if 0
    retval = rig_set_parm_all(rig, parms);

    if (retval != RIG_OK)
    {
        return retval;
    }

#else
    return -RIG_ENIMPL;
#endif

    return retval;
}

开发者ID:airween，项目名称:hamlib，代码行数:66，代码来源:mem.c

示例11: aor_set_level

/*
 * aor_set_level
 * Assumes rig!=NULL, rig->state.priv!=NULL
 */
int aor_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
	struct rig_state *rs;
	char lvlbuf[BUFSZ];
	int lvl_len;
	unsigned i;
	int agc;

	rs = &rig->state;


	switch (level) {
	case RIG_LEVEL_ATT:
		{
		unsigned att = 0;
		for (i=0; i<MAXDBLSTSIZ && !RIG_IS_DBLST_END(rs->attenuator[i]); i++) {
			if (rs->attenuator[i] == val.i) {
				att = i+1;
				break;
			}
		}
		/* should be caught by the front end */
		if ((val.i != 0) & (i>=MAXDBLSTSIZ || RIG_IS_DBLST_END(rs->attenuator[i])) )
			return -RIG_EINVAL;

		lvl_len = sprintf(lvlbuf, "AT%u" EOM, att);
		break;
		}
	case RIG_LEVEL_AGC:	/* AR5000 & AR5000A */
		switch(val.i) {
		case RIG_AGC_FAST: agc = '0'; break;
		case RIG_AGC_MEDIUM: agc = '1'; break;
		case RIG_AGC_SLOW: agc = '2'; break;
		case RIG_AGC_OFF:
		default: agc = 'F';
		}
		lvl_len = sprintf(lvlbuf,"AC%c" EOM, agc);
		break;

	default:
		rig_debug(RIG_DEBUG_ERR,"Unsupported aor_set_level %d\n", level);
		return -RIG_EINVAL;
	}

	return aor_transaction (rig, lvlbuf, lvl_len, NULL, NULL);
}

开发者ID:airween，项目名称:hamlib，代码行数:50，代码来源:aor.c

示例12: thd72_set_mem

static int thd72_set_mem(RIG *rig, vfo_t vfo, int ch)
{
  int retval;
  char c, cmd[10];

  rig_debug(RIG_DEBUG_TRACE, "%s: called\n", __func__);

  retval = thd72_vfoc(rig, vfo, &c);

  if (retval != RIG_OK)
  {
    return retval;
  }

  sprintf(cmd, "MR %c,%03d", c, ch);
  return kenwood_simple_transaction(rig, cmd, 10);
}

开发者ID:mdblack98，项目名称:hamlib，代码行数:17，代码来源:thd72.c

示例13: thd72_get_mem

static int thd72_get_mem(RIG *rig, vfo_t vfo, int *ch)
{
    int retval;
    char c, cmd[10], buf[10];

    rig_debug(RIG_DEBUG_TRACE, "%s: called\n", __func__);

    retval = thd72_vfoc(rig, vfo, &c);
    if (retval != RIG_OK)
	return retval;
    sprintf(cmd, "MR %c", c);
    retval = kenwood_transaction(rig, cmd, buf, sizeof (buf));
    if (retval != RIG_OK)
	return retval;
    sscanf(buf+5, "%d", ch);
    return RIG_OK;
}

开发者ID:airween，项目名称:hamlib，代码行数:17，代码来源:thd72.c

示例14: ft100_get_split_vfo

int ft100_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo) {

  struct ft100_priv_data *priv = (struct ft100_priv_data*)rig->state.priv;
  int ret;

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __func__);

  if( !split )  return -RIG_EINVAL;

  ret = ft100_read_flags(rig);
  if (ret < 0)
	return ret;

  *split = (priv->flags.byte[0] & 0x01) == 0x01 ? RIG_SPLIT_ON : RIG_SPLIT_OFF;

  return RIG_OK;
}

开发者ID:DF4OR，项目名称:hamlib，代码行数:17，代码来源:ft100.c

示例15: ft897_set_mode

int ft897_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
  int index;	/* index of sequence to send */

  if (vfo != RIG_VFO_CURR)
    return -RIG_ENTARGET;

  rig_debug(RIG_DEBUG_VERBOSE,"ft897: generic mode = %x \n", mode);

  switch(mode) {
  case RIG_MODE_AM:
    index = FT897_NATIVE_CAT_SET_MODE_AM;
    break;
  case RIG_MODE_CW:
    index = FT897_NATIVE_CAT_SET_MODE_CW;
    break;
  case RIG_MODE_USB:
    index = FT897_NATIVE_CAT_SET_MODE_USB;
    break;
  case RIG_MODE_LSB:
    index = FT897_NATIVE_CAT_SET_MODE_LSB;
    break;
  case RIG_MODE_RTTY:
    index = FT897_NATIVE_CAT_SET_MODE_DIG;
    break;
  case RIG_MODE_FM:
    index = FT897_NATIVE_CAT_SET_MODE_FM;
    break;
  case RIG_MODE_WFM:
    index = FT897_NATIVE_CAT_SET_MODE_FM;
    break;
  case RIG_MODE_CWR:
    index = FT897_NATIVE_CAT_SET_MODE_CWR;
    break;
  case RIG_MODE_PKTFM:
    index = FT897_NATIVE_CAT_SET_MODE_PKT;
    break;
  default:
    return -RIG_EINVAL;
  }

  if (width != RIG_PASSBAND_NORMAL)
    return -RIG_EINVAL;

  return ft897_send_cmd(rig, index);
}

开发者ID:W4AQL，项目名称:hamlib，代码行数:46，代码来源:ft897.c

示例16: gp2000_set_freq

/*
 * gp2000_set_freq
 * Assumes rig!=NULL
 */
int
gp2000_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
    char freqbuf[32];
    int freq_len, retval;

    rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s,freq=%.0f\n", __func__,
              rig_strvfo(vfo), freq);

    freq_len =
        snprintf(freqbuf, sizeof(freqbuf), BOM "F%" PRIll ",%" PRIll EOM,
                 (int64_t) freq,
                 (int64_t) freq);
    retval = gp2000_transaction(rig, freqbuf, freq_len, NULL, NULL);

    return retval;
}

开发者ID:airween，项目名称:hamlib，代码行数:21，代码来源:gp2000.c

示例17: ft817_set_freq

int ft817_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
    unsigned char data[YAESU_CMD_LENGTH - 1];

    if (vfo != RIG_VFO_CURR)
        return -RIG_ENTARGET;

    rig_debug(RIG_DEBUG_VERBOSE,"ft817: requested freq = %"PRIfreq" Hz\n", freq);

    /* fill in the frequency */
    to_bcd_be(data, (freq + 5) / 10, 8);

    rig_force_cache_timeout(
        &((struct ft817_priv_data *)rig->state.priv)->fm_status_tv);

    return ft817_send_icmd(rig, FT817_NATIVE_CAT_SET_FREQ, data);
}

开发者ID:GomSpace，项目名称:hamlib，代码行数:17，代码来源:ft817.c

示例18: pcr_set_trn

int pcr_set_trn(RIG * rig, int trn)
{
	struct pcr_priv_data *priv = (struct pcr_priv_data *) rig->state.priv;

	rig_debug(RIG_DEBUG_VERBOSE, "%s: trn = %d\n", __func__, trn);

	if (trn == RIG_TRN_OFF) {
		priv->auto_update = 0;
		return pcr_transaction(rig, "G300");
	}
	else if (trn == RIG_TRN_RIG) {
		priv->auto_update = 1;
		return pcr_send(rig, "G301");
	}
	else
		return -RIG_EINVAL;
}

开发者ID:DF4OR，项目名称:hamlib，代码行数:17，代码来源:pcr.c

示例19: thd72_get_rptr_offs

static int thd72_get_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t *offs)
{
  int retval;
  char buf[64];

  rig_debug(RIG_DEBUG_TRACE, "%s: called\n", __func__);

  retval = thd72_get_freq_info(rig, vfo, buf);

  if (retval != RIG_OK)
  {
    return retval;
  }

  sscanf(buf + 42, "%ld", offs);
  return RIG_OK;
}

开发者ID:mdblack98，项目名称:hamlib，代码行数:17，代码来源:thd72.c

示例20: netrigctl_set_split_mode

static int netrigctl_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width)
{
  int ret, len;
  char cmd[CMD_MAX];
  char buf[BUF_MAX];

  rig_debug(RIG_DEBUG_VERBOSE,"%s called\n", __FUNCTION__);

  len = sprintf(cmd, "X %s %li\n",
  		rig_strrmode(tx_mode), tx_width);

  ret = netrigctl_transaction(rig, cmd, len, buf);
  if (ret > 0)
	return -RIG_EPROTO;
  else
  	return ret;
}

开发者ID:jnse，项目名称:qtar8200，代码行数:17，代码来源:netrigctl.c

注：本文中的rig_debug函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ right_rotate函数代码示例发布时间：2022-05-30

C++ riPS0函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19174|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9985|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9654|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8621|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rig_debug函数代码示例

示例1: netrigctl_scan

示例2: netrigctl_set_powerstat

示例3: netrigctl_set_bank

示例4: ft817_send_icmd

示例5: par_unlock

示例6: mode_to_char

示例7: ft817_init

示例8: netrigctl_send_morse

示例9: netrigctl_vfo_op

示例10: rig_set_mem_all

示例11: aor_set_level

示例12: thd72_set_mem

示例13: thd72_get_mem

示例14: ft100_get_split_vfo

示例15: ft897_set_mode

示例16: gp2000_set_freq

示例17: ft817_set_freq

示例18: pcr_set_trn

示例19: thd72_get_rptr_offs

示例20: netrigctl_set_split_mode

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2366

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053