C++ rgb_t函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rgb_t函数的典型用法代码示例。如果您正苦于以下问题：C++ rgb_t函数的具体用法？C++ rgb_t怎么用？C++ rgb_t使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rgb_t函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(gunsmoke_state, gunsmoke)
{
	const UINT8 *color_prom = memregion("proms")->base();
	int i;

	/* create a lookup table for the palette */
	for (i = 0; i < 0x100; i++)
	{
		int r = pal4bit(color_prom[i + 0x000]);
		int g = pal4bit(color_prom[i + 0x100]);
		int b = pal4bit(color_prom[i + 0x200]);

		palette.set_indirect_color(i, rgb_t(r, g, b));
	}

	/* color_prom now points to the beginning of the lookup table */
	color_prom += 0x300;

	/* characters use colors 0x40-0x4f */
	for (i = 0; i < 0x80; i++)
	{
		UINT8 ctabentry = color_prom[i] | 0x40;
		palette.set_pen_indirect(i, ctabentry);
	}

	/* background tiles use colors 0-0x3f */
	for (i = 0x100; i < 0x200; i++)
	{
		UINT8 ctabentry = color_prom[i] | ((color_prom[i + 0x100] & 0x03) << 4);
		palette.set_pen_indirect(i - 0x80, ctabentry);
	}

	/* sprites use colors 0x80-0xff */
	for (i = 0x300; i < 0x400; i++)
	{
		UINT8 ctabentry = color_prom[i] | ((color_prom[i + 0x100] & 0x07) << 4) | 0x80;
		palette.set_pen_indirect(i - 0x180, ctabentry);
	}
}

开发者ID:Archlogic，项目名称:libretro-mame，代码行数:39，代码来源:gunsmoke.c

示例2: PALETTE_INIT_MEMBER

/* guess: use the same resistor values as Crazy Climber (needs checking on the real HW) */
PALETTE_INIT_MEMBER(nightgal_state, nightgal)
{
	const uint8_t *color_prom = memregion("proms")->base();
	static const int resistances_rg[3] = { 1000, 470, 220 };
	static const int resistances_b [2] = { 470, 220 };
	double weights_rg[3], weights_b[2];
	int i;

	/* compute the color output resistor weights */
	compute_resistor_weights(0, 255, -1.0,
			3, resistances_rg, weights_rg, 0, 0,
			2, resistances_b,  weights_b,  0, 0,
			0, nullptr, nullptr, 0, 0);

	for (i = 0; i < palette.entries(); i++)
	{
		int bit0, bit1, bit2;
		int r, g, b;

		/* red component */
		bit0 = BIT(color_prom[i], 0);
		bit1 = BIT(color_prom[i], 1);
		bit2 = BIT(color_prom[i], 2);
		r = combine_3_weights(weights_rg, bit0, bit1, bit2);

		/* green component */
		bit0 = BIT(color_prom[i], 3);
		bit1 = BIT(color_prom[i], 4);
		bit2 = BIT(color_prom[i], 5);
		g = combine_3_weights(weights_rg, bit0, bit1, bit2);

		/* blue component */
		bit0 = BIT(color_prom[i], 6);
		bit1 = BIT(color_prom[i], 7);
		b = combine_2_weights(weights_b, bit0, bit1);

		palette.set_pen_color(i, rgb_t(r, g, b));
	}
}

开发者ID:Robbbert，项目名称:store1，代码行数:40，代码来源:nightgal.cpp

示例3: switch

void tc0110pcr_device::restore_colors()
{
    int i, color, r = 0, g = 0, b = 0;

    for (i = 0; i < (256 * 16); i++)
    {
        color = m_ram[i];

        switch (m_type)
        {
        case 0x00:
        {
            r = pal5bit(color >>  0);
            g = pal5bit(color >>  5);
            b = pal5bit(color >> 10);
            break;
        }

        case 0x01:
        {
            b = pal5bit(color >>  0);
            g = pal5bit(color >>  5);
            r = pal5bit(color >> 10);
            break;
        }

        case 0x02:
        {
            r = pal4bit(color >> 0);
            g = pal4bit(color >> 4);
            b = pal4bit(color >> 8);
            break;
        }
        }

        m_palette->set_pen_color(i, rgb_t(r, g, b));
    }
}

开发者ID:DragonMinded，项目名称:mame，代码行数:38，代码来源:tc0110pcr.cpp

示例4: memregion

void kontest_state::kontest_palette(palette_device &palette) const
{
	const uint8_t *color_prom = memregion("proms")->base();
	for (int i = 0; i < 0x20; ++i)
	{
		int bit0, bit1, bit2;

		bit0 = 0;
		bit1 = BIT(color_prom[i], 6);
		bit2 = BIT(color_prom[i], 7);
		int const b = 0x21 * bit0 + 0x47 * bit1 + 0x97 * bit2;
		bit0 = BIT(color_prom[i], 3);
		bit1 = BIT(color_prom[i], 4);
		bit2 = BIT(color_prom[i], 5);
		int const g = 0x21 * bit0 + 0x47 * bit1 + 0x97 * bit2;
		bit0 = BIT(color_prom[i], 0);
		bit1 = BIT(color_prom[i], 1);
		bit2 = BIT(color_prom[i], 2);
		int const r = 0x21 * bit0 + 0x47 * bit1 + 0x97 * bit2;

		palette.set_pen_color(i, rgb_t(r, g, b));
	}
}

开发者ID:SailorSat，项目名称:cabmame，代码行数:23，代码来源:kontest.cpp

示例5: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(equites_state,splndrbt)
{
	const UINT8 *color_prom = memregion("proms")->base();
	int i;

	for (i = 0; i < 0x100; i++)
		palette.set_indirect_color(i, rgb_t(pal4bit(color_prom[i]), pal4bit(color_prom[i + 0x100]), pal4bit(color_prom[i + 0x200])));

	for (i = 0; i < 0x100; i++)
		palette.set_pen_indirect(i, i);

	// point to the bg CLUT
	color_prom += 0x300;

	for (i = 0; i < 0x80; i++)
		palette.set_pen_indirect(i + 0x100, color_prom[i] + 0x10);

	// point to the sprite CLUT
	color_prom += 0x100;

	for (i = 0; i < 0x100; i++)
		palette.set_pen_indirect(i + 0x180, color_prom[i]);
}

开发者ID:jiangzhonghui，项目名称:mame，代码行数:23，代码来源:equites.c

示例6: dview_draw_vsb

static void dview_draw_vsb(DView *dv)
{
	int vt;
	int ts;
	//int sz = SLIDER_SIZE;
	int sz;
	rectangle r;
	adjustment *sb = &dv->vsb;

	dview_get_rect(dv, RECT_DVIEW_VSB, r);

	dview_draw_outlined_box(dv, RECT_DVIEW_VSB, 0, r.height() - HSB_HEIGHT, VSB_WIDTH, HSB_HEIGHT, rgb_t(0xff, 0xff, 0x00, 0x00));
	dview_draw_outlined_box(dv, RECT_DVIEW_VSB, 0, 0,                       VSB_WIDTH, HSB_HEIGHT, rgb_t(0xff, 0xff, 0x00, 0x00));

	ts = r.height() - 2 * HSB_HEIGHT;

	sz = (ts * (sb->page_size)) / (sb->upper - sb->lower);
	ts = ts - sz;

	vt = (ts * (sb->value - sb->lower)) / (sb->upper - sb->lower - sb->page_size) + sz / 2 + HSB_HEIGHT;

	dview_draw_outlined_box(dv, RECT_DVIEW_VSB, 0, vt - sz / 2, VSB_WIDTH, sz, rgb_t(0xff, 0xff, 0x00, 0x00));
}

开发者ID:h0tw1r3，项目名称:mewui，代码行数:23，代码来源:debugint.c

示例7: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(olibochu_state, olibochu)
{
	const UINT8 *color_prom = memregion("proms")->base();
	int i;

	for (i = 0; i < palette.entries(); i++)
	{
		UINT8 pen;
		int bit0, bit1, bit2, r, g, b;

		if (i < 0x100)
			/* characters */
			pen = (color_prom[0x020 + (i - 0x000)] & 0x0f) | 0x10;
		else
			/* sprites */
			pen = (color_prom[0x120 + (i - 0x100)] & 0x0f) | 0x00;

		/* red component */
		bit0 = BIT(color_prom[pen], 0);
		bit1 = BIT(color_prom[pen], 1);
		bit2 = BIT(color_prom[pen], 2);
		r = 0x21 * bit0 + 0x47 * bit1 + 0x97 * bit2;

		/* green component */
		bit0 = BIT(color_prom[pen], 3);
		bit1 = BIT(color_prom[pen], 4);
		bit2 = BIT(color_prom[pen], 5);
		g = 0x21 * bit0 + 0x47 * bit1 + 0x97 * bit2;

		/* blue component */
		bit0 = BIT(color_prom[pen], 6);
		bit1 = BIT(color_prom[pen], 7);
		b = 0x4f * bit0 + 0xa8 * bit1;

		palette.set_pen_color(i, rgb_t(r, g, b));
	}
}

开发者ID:richard42，项目名称:mame，代码行数:37，代码来源:olibochu.c

示例8: memregion

// guess: use the same resistor values as Crazy Climber (needs checking on the real hardware)
void jangou_state::jangou_palette(palette_device &palette) const
{
	uint8_t const *const color_prom = memregion("proms")->base();
	static constexpr int resistances_rg[3] = { 1000, 470, 220 };
	static constexpr int resistances_b [2] = { 470, 220 };

	// compute the color output resistor weights
	double weights_rg[3], weights_b[2];
	compute_resistor_weights(0, 255, -1.0,
			3, resistances_rg, weights_rg, 0, 0,
			2, resistances_b,  weights_b,  0, 0,
			0, nullptr, nullptr, 0, 0);

	for (int i = 0;i < palette.entries(); i++)
	{
		int bit0, bit1, bit2;

		// red component
		bit0 = BIT(color_prom[i], 0);
		bit1 = BIT(color_prom[i], 1);
		bit2 = BIT(color_prom[i], 2);
		int const r = combine_weights(weights_rg, bit0, bit1, bit2);

		// green component
		bit0 = BIT(color_prom[i], 3);
		bit1 = BIT(color_prom[i], 4);
		bit2 = BIT(color_prom[i], 5);
		int const g = combine_weights(weights_rg, bit0, bit1, bit2);

		// blue component
		bit0 = BIT(color_prom[i], 6);
		bit1 = BIT(color_prom[i], 7);
		int const b = combine_weights(weights_b, bit0, bit1);

		palette.set_pen_color(i, rgb_t(r, g, b));
	}
}

开发者ID:SailorSat，项目名称:cabmame，代码行数:38，代码来源:jangou.cpp

示例9: map_attr_to_fg_bg

INLINE void map_attr_to_fg_bg(unsigned char attr, rgb_t *fg, rgb_t *bg)
{
	*bg = rgb_t(0xff,0xff,0xff,0xff);
	*fg = rgb_t(0xff,0x00,0x00,0x00);

	if(attr & DCA_ANCILLARY)
		*bg = rgb_t(0xff,0xe0,0xe0,0xe0);
	if(attr & DCA_SELECTED) {
		*bg = rgb_t(0xff,0xff,0x80,0x80);
	}
	if(attr & DCA_CURRENT) {
		*bg = rgb_t(0xff,0xff,0xff,0x00);
	}
	if(attr & DCA_CHANGED) {
		*fg = rgb_t(0xff,0xff,0x00,0x00);
	}
	if(attr & DCA_INVALID) {
		*fg = rgb_t(0xff,0x00,0x00,0xff);
	}
	if(attr & DCA_DISABLED) {
		*fg = rgb_t(fg->a(), (fg->r() + bg->r()) >> 1, (fg->g() + bg->g()) >> 1, (fg->b() + bg->b()) >> 1);
	}

开发者ID:h0tw1r3，项目名称:mewui，代码行数:22，代码来源:debugint.c

示例10: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(sprint4_state, sprint4)
{
	palette.set_indirect_color(0, rgb_t(0x00, 0x00, 0x00)); /* black  */
	palette.set_indirect_color(1, rgb_t(0xfc, 0xdf, 0x80)); /* peach  */
	palette.set_indirect_color(2, rgb_t(0xf0, 0x00, 0xf0)); /* violet */
	palette.set_indirect_color(3, rgb_t(0x00, 0xf0, 0x0f)); /* green  */
	palette.set_indirect_color(4, rgb_t(0x30, 0x4f, 0xff)); /* blue   */
	palette.set_indirect_color(5, rgb_t(0xff, 0xff, 0xff)); /* white  */

	palette.set_pen_indirect(0, 0);
	palette.set_pen_indirect(2, 0);
	palette.set_pen_indirect(4, 0);
	palette.set_pen_indirect(6, 0);
	palette.set_pen_indirect(8, 0);

	palette.set_pen_indirect(1, 1);
	palette.set_pen_indirect(3, 2);
	palette.set_pen_indirect(5, 3);
	palette.set_pen_indirect(7, 4);
	palette.set_pen_indirect(9, 5);
}

开发者ID:Archlogic，项目名称:libretro-mame，代码行数:21，代码来源:sprint4.c

示例11: rgb_t

void nc_state::video_start()
{
}

#if 0
/* two colours */
static const unsigned short nc_colour_table[NC_NUM_COLOURS] =
{
	0, 1,2,3
};
#endif

/* black/white */
static const rgb_t nc_palette[NC_NUM_COLOURS] =
{
	rgb_t(0x060, 0x060, 0x060),
	rgb_t(0x000, 0x000, 0x000),
	rgb_t(0x080, 0x0a0, 0x060),
	rgb_t(0x000, 0x000, 0x000)
};


/* Initialise the palette */
PALETTE_INIT_MEMBER(nc_state, nc)
{
	palette.set_pen_colors(0, nc_palette, ARRAY_LENGTH(nc_palette));
}


void nc_state::nc200_video_set_backlight(int state)
{

开发者ID:vorlenko，项目名称:mame，代码行数:31，代码来源:nc.c

示例12: INPUT_PORTS_START

/* Input ports */
static INPUT_PORTS_START( tim100 )
INPUT_PORTS_END

static DEVICE_INPUT_DEFAULTS_START( tim100 )
	DEVICE_INPUT_DEFAULTS( "RS232_TXBAUD", 0xff, RS232_BAUD_9600 )
	DEVICE_INPUT_DEFAULTS( "RS232_RXBAUD", 0xff, RS232_BAUD_9600 )
	DEVICE_INPUT_DEFAULTS( "RS232_STARTBITS", 0xff, RS232_STARTBITS_1 )
	DEVICE_INPUT_DEFAULTS( "RS232_DATABITS", 0xff, RS232_DATABITS_8 )
	DEVICE_INPUT_DEFAULTS( "RS232_PARITY", 0xff, RS232_PARITY_ODD )
	DEVICE_INPUT_DEFAULTS( "RS232_STOPBITS", 0xff, RS232_STOPBITS_2 )
DEVICE_INPUT_DEFAULTS_END

static const rgb_t tim100_palette[3] = {
	rgb_t(0x00, 0x00, 0x00), // black
	rgb_t(0xa0, 0xa0, 0xa0), // white
	rgb_t(0xff, 0xff, 0xff)  // highlight
};

void tim100_state::machine_start()
{
	m_charmap = memregion("chargen")->base();
	m_palette->set_pen_colors(0, tim100_palette, ARRAY_LENGTH(tim100_palette));
}

const gfx_layout tim100_charlayout =
{
	12, 16,             /* 8x16 characters */
	256,                /* 128 characters */
	1,              /* 1 bits per pixel */

开发者ID:MASHinfo，项目名称:mame，代码行数:30，代码来源:tim100.cpp

示例13: PORT_START

	PORT_START("keyb_special")
	PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_UNUSED)
	PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Left Shift")   PORT_CODE(KEYCODE_LSHIFT)   PORT_CHAR(UCHAR_SHIFT_1)
	PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Right Shift")  PORT_CODE(KEYCODE_RSHIFT)   PORT_CHAR(UCHAR_SHIFT_1)
	PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("Control")      PORT_CODE(KEYCODE_LCONTROL) PORT_CHAR(UCHAR_SHIFT_2)
	PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_UNUSED)
	PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_UNUSED)
	PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_KEYBOARD) PORT_NAME("RESET")        PORT_CODE(KEYCODE_F12)
INPUT_PORTS_END

// this is an apple II palette; it seems more likely the
// actual laser3000 has a digital RGB palette...
static const rgb_t laser3k_palette[] =
{
	rgb_t::black,
	rgb_t(0xE3, 0x1E, 0x60), /* Dark Red */
	rgb_t(0x60, 0x4E, 0xBD), /* Dark Blue */
	rgb_t(0xFF, 0x44, 0xFD), /* Purple */
	rgb_t(0x00, 0xA3, 0x60), /* Dark Green */
	rgb_t(0x9C, 0x9C, 0x9C), /* Dark Gray */
	rgb_t(0x14, 0xCF, 0xFD), /* Medium Blue */
	rgb_t(0xD0, 0xC3, 0xFF), /* Light Blue */
	rgb_t(0x60, 0x72, 0x03), /* Brown */
	rgb_t(0xFF, 0x6A, 0x3C), /* Orange */
	rgb_t(0x9C, 0x9C, 0x9C), /* Light Grey */
	rgb_t(0xFF, 0xA0, 0xD0), /* Pink */
	rgb_t(0x14, 0xF5, 0x3C), /* Light Green */
	rgb_t(0xD0, 0xDD, 0x8D), /* Yellow */
	rgb_t(0x72, 0xFF, 0xD0), /* Aquamarine */
	rgb_t(0xFF, 0xFF, 0xFF)  /* White */
};

开发者ID:DragonMinded，项目名称:mame，代码行数:31，代码来源:laser3k.cpp

示例14: machine

void ui_menu_dats_view::custom_render(void *selectedref, float top, float bottom, float origx1, float origy1, float origx2, float origy2)
{
	ui_manager &mui = machine().ui();
	float maxwidth = origx2 - origx1;
	float width;
	std::string driver;

	if (issoft)
		driver = m_swinfo->longname;
	else
		driver = m_driver->description;

	mui.draw_text_full(container, driver.c_str(), 0.0f, 0.0f, 1.0f, JUSTIFY_CENTER, WRAP_TRUNCATE,
		DRAW_NONE, ARGB_WHITE, ARGB_BLACK, &width, nullptr);
	width += 2 * UI_BOX_LR_BORDER;
	maxwidth = MAX(origx2 - origx1, width);

	// compute our bounds
	float x1 = 0.5f - 0.5f * maxwidth;
	float x2 = x1 + maxwidth;
	float y1 = origy1 - top;
	float y2 = origy1 - 2.0f * UI_BOX_TB_BORDER - mui.get_line_height();

	// draw a box
	mui.draw_outlined_box(container, x1, y1, x2, y2, UI_GREEN_COLOR);

	// take off the borders
	x1 += UI_BOX_LR_BORDER;
	x2 -= UI_BOX_LR_BORDER;
	y1 += UI_BOX_TB_BORDER;

	mui.draw_text_full(container, driver.c_str(), x1, y1, x2 - x1, JUSTIFY_CENTER, WRAP_NEVER,
		DRAW_NORMAL, UI_TEXT_COLOR, UI_TEXT_BG_COLOR, nullptr, nullptr);


	// take off the borders
	x1 -= UI_BOX_LR_BORDER;
	x2 += UI_BOX_LR_BORDER;
	y1 -= UI_BOX_TB_BORDER;

	maxwidth = 0;
	for (auto & elem : m_items_list)
	{
		mui.draw_text_full(container, elem.label.c_str(), 0.0f, 0.0f, 1.0f, JUSTIFY_CENTER, WRAP_NEVER,
			DRAW_NONE, ARGB_WHITE, ARGB_BLACK, &width, nullptr);
		maxwidth += width;
	}

	float space = (1.0f - maxwidth) / (m_items_list.size() * 2);

	// compute our bounds
	y1 = y2 + UI_BOX_TB_BORDER;
	y2 += mui.get_line_height() + 2.0f * UI_BOX_TB_BORDER;

	// draw a box
	mui.draw_outlined_box(container, x1, y1, x2, y2, UI_BACKGROUND_COLOR);

	// take off the borders
	x2 -= UI_BOX_LR_BORDER;
	y1 += UI_BOX_TB_BORDER;

	// draw the text within it
	int x = 0;
	for (auto & elem : m_items_list)
	{
		x1 += space;
		rgb_t fcolor = (actual == x) ? rgb_t(0xff, 0xff, 0xff, 0x00) : UI_TEXT_COLOR;
		rgb_t bcolor = (actual == x) ? rgb_t(0xff, 0xff, 0xff, 0xff) : UI_TEXT_BG_COLOR;
		mui.draw_text_full(container, elem.label.c_str(), x1, y1, 1.0f, JUSTIFY_LEFT, WRAP_NEVER,
			DRAW_NONE, fcolor, bcolor, &width, nullptr);
		if (bcolor != UI_TEXT_BG_COLOR)
			mui.draw_textured_box(container, x1 - (space / 2), y1, x1 + width + (space / 2), y2, bcolor, rgb_t(255, 43, 43, 43),
				hilight_main_texture, PRIMFLAG_BLENDMODE(BLENDMODE_ALPHA) | PRIMFLAG_TEXWRAP(TRUE));

		mui.draw_text_full(container, elem.label.c_str(), x1, y1, 1.0f, JUSTIFY_LEFT, WRAP_NEVER,
			DRAW_NORMAL, fcolor, bcolor, &width, nullptr);
		x1 += width + space;
		++x;
	}

	// bottom
	std::string revision;
	revision.assign(_("Revision: ")).append(m_items_list[actual].revision);
	mui.draw_text_full(container, revision.c_str(), 0.0f, 0.0f, 1.0f, JUSTIFY_CENTER, WRAP_TRUNCATE,
	                              DRAW_NONE, ARGB_WHITE, ARGB_BLACK, &width, nullptr);
	width += 2 * UI_BOX_LR_BORDER;
	maxwidth = MAX(origx2 - origx1, width);

	// compute our bounds
	x1 = 0.5f - 0.5f * maxwidth;
	x2 = x1 + maxwidth;
	y1 = origy2 + UI_BOX_TB_BORDER;
	y2 = origy2 + bottom;

	// draw a box
	mui.draw_outlined_box(container, x1, y1, x2, y2, UI_GREEN_COLOR);

	// take off the borders
	x1 += UI_BOX_LR_BORDER;
	x2 -= UI_BOX_LR_BORDER;
//.........这里部分代码省略.........

开发者ID:Chintiger，项目名称:mame，代码行数:101，代码来源:datmenu.cpp

示例15: auto_bitmap_ind16_alloc

	m_prn_output = auto_bitmap_ind16_alloc(machine(),PCW_PRINTER_WIDTH,PCW_PRINTER_HEIGHT);
	m_prn_output->fill(1, rect);
}

#if 0
/* two colours */
static const unsigned short pcw_colour_table[PCW_NUM_COLOURS] =
{
	0, 1
};
#endif

/* black/white */
static const rgb_t pcw_palette[PCW_NUM_COLOURS] =
{
	rgb_t(0x000, 0x000, 0x000),
	rgb_t(0x0ff, 0x0ff, 0x0ff)
};


/* Initialise the palette */
PALETTE_INIT_MEMBER(pcw_state, pcw)
{
	palette.set_pen_colors(0, pcw_palette, ARRAY_LENGTH(pcw_palette));
}

/***************************************************************************
  Draw the game screen in the given bitmap_ind16.
  Do NOT call osd_update_display() from this function,
  it will be called by the main emulation engine.
***************************************************************************/

开发者ID:Archlogic，项目名称:libretro-mame，代码行数:31，代码来源:pcw.c

示例16: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(tamag1_state, tama)
{
	palette.set_pen_color(0, rgb_t(0xf1, 0xf0, 0xf9)); // background
	palette.set_pen_color(1, rgb_t(0x3c, 0x38, 0x38)); // lcd pixel
}

开发者ID:Robbbert，项目名称:store1，代码行数:5，代码来源:tamag1.cpp

示例17: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(d110_state, d110)
{
	palette.set_pen_color(0, rgb_t(0, 255, 0));
	palette.set_pen_color(1, rgb_t(0, 0, 0));
}

开发者ID:DragonMinded，项目名称:mame，代码行数:5，代码来源:rd110.cpp

示例18: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(prestige_state, prestige)
{
	palette.set_pen_color(0, rgb_t(39, 108, 51));
	palette.set_pen_color(1, rgb_t(16, 37, 84));
}

开发者ID:dinkc64，项目名称:mame，代码行数:5，代码来源:prestige.c

示例19: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(hunter2_state, hunter2)
{
	palette.set_pen_color(0, rgb_t(138, 146, 148));
	palette.set_pen_color(1, rgb_t(92, 83, 88));
}

开发者ID:MASHinfo，项目名称:mame，代码行数:5，代码来源:hunter2.cpp

示例20: PALETTE_INIT_MEMBER

PALETTE_INIT_MEMBER(pc8401a_state,pc8401a)
{
	palette.set_pen_color(0, rgb_t(39, 108, 51));
	palette.set_pen_color(1, rgb_t(16, 37, 84));
}

开发者ID:NULUSIOS，项目名称:mame，代码行数:5，代码来源:pc8401a.cpp

注：本文中的rgb_t函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rgb_to_hsv函数代码示例发布时间：2022-05-30

C++ rfree函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19174|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9985|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9654|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8621|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rgb_t函数代码示例

示例1: PALETTE_INIT_MEMBER

示例2: PALETTE_INIT_MEMBER

示例3: switch

示例4: memregion

示例5: PALETTE_INIT_MEMBER

示例6: dview_draw_vsb

示例7: PALETTE_INIT_MEMBER

示例8: memregion

示例9: map_attr_to_fg_bg

示例10: PALETTE_INIT_MEMBER

示例11: rgb_t

示例12: INPUT_PORTS_START

示例13: PORT_START

示例14: machine

示例15: auto_bitmap_ind16_alloc

示例16: PALETTE_INIT_MEMBER

示例17: PALETTE_INIT_MEMBER

示例18: PALETTE_INIT_MEMBER

示例19: PALETTE_INIT_MEMBER

示例20: PALETTE_INIT_MEMBER

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2366

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053