C++ retranslate函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中retranslate函数的典型用法代码示例。如果您正苦于以下问题：C++ retranslate函数的具体用法？C++ retranslate怎么用？C++ retranslate使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了retranslate函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: connect

// Initialize the dialog widgets and connect the signals/slots
void ObservabilityDialog::createDialogContent()
{
	ui->setupUi(dialog);
	ui->tabs->setCurrentIndex(0);
	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));

	// Settings:
	connect(ui->Today, SIGNAL(stateChanged(int)), this, SLOT(setTodayFlag(int)));
	connect(ui->AcroCos, SIGNAL(stateChanged(int)), this, SLOT(setAcroCosFlag(int)));
	connect(ui->Opposition, SIGNAL(stateChanged(int)), this, SLOT(setOppositionFlag(int)));
	connect(ui->Goods, SIGNAL(stateChanged(int)), this, SLOT(setGoodDatesFlag(int)));
	connect(ui->FullMoon, SIGNAL(stateChanged(int)), this, SLOT(setFullMoonFlag(int)));
//	connect(ui->Crescent, SIGNAL(stateChanged(int)), this, SLOT(setCrescentMoonFlag(int)));
//	connect(ui->SuperMoon, SIGNAL(stateChanged(int)), this, SLOT(setSuperMoonFlag(int)));

	connect(ui->Red, SIGNAL(sliderMoved(int)), this, SLOT(setRed(int)));
	connect(ui->Green, SIGNAL(sliderMoved(int)), this, SLOT(setGreen(int)));
	connect(ui->Blue, SIGNAL(sliderMoved(int)), this, SLOT(setBlue(int)));
	connect(ui->fontSize, SIGNAL(sliderMoved(int)), this, SLOT(setSize(int)));
	connect(ui->SunAltitude, SIGNAL(sliderMoved(int)), this, SLOT(setAltitude(int)));
	connect(ui->HorizAltitude, SIGNAL(sliderMoved(int)), this, SLOT(setHorizon(int)));

	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
	connect(ui->restoreDefaultsButton, SIGNAL(clicked()), this, SLOT(restoreDefaults()));
	connect(ui->saveSettingsButton, SIGNAL(clicked()), this, SLOT(saveSettings()));

	// About tab
	setAboutHtml();
	StelGui* gui = dynamic_cast<StelGui*>(StelApp::getInstance().getGui());
	Q_ASSERT(gui);
	ui->aboutTextBrowser->document()->setDefaultStyleSheet(QString(gui->getStelStyle().htmlStyleSheet));

	updateGuiFromSettings();

}

开发者ID:incadoi，项目名称:stellarium-1，代码行数:36，代码来源:ObservabilityDialog.cpp

示例2: connect

void MpcImportWindow::createDialogContent()
{
	ui->setupUi(dialog);

	//Signals
	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
	connect(ui->TitleBar, SIGNAL(movedTo(QPoint)), this, SLOT(handleMovedTo(QPoint)));

	connect(ui->pushButtonAcquire, SIGNAL(clicked()),
	        this, SLOT(acquireObjectData()));
	connect(ui->pushButtonAbortDownload, SIGNAL(clicked()),
	        this, SLOT(abortDownload()));
	connect(ui->pushButtonAdd, SIGNAL(clicked()), this, SLOT(addObjects()));
	connect(ui->pushButtonDiscard, SIGNAL(clicked()),
	        this, SLOT(discardObjects()));

	connect(ui->pushButtonBrowse, SIGNAL(clicked()), this, SLOT(selectFile()));
	connect(ui->comboBoxBookmarks, SIGNAL(currentIndexChanged(QString)),
	        this, SLOT(bookmarkSelected(QString)));

	connect(ui->radioButtonFile, SIGNAL(toggled(bool)),
	        ui->frameFile, SLOT(setVisible(bool)));
	connect(ui->radioButtonURL, SIGNAL(toggled(bool)),
	        ui->frameURL, SLOT(setVisible(bool)));

	connect(ui->radioButtonAsteroids, SIGNAL(toggled(bool)),
	        this, SLOT(switchImportType(bool)));
	connect(ui->radioButtonComets, SIGNAL(toggled(bool)),
	        this, SLOT(switchImportType(bool)));

	connect(ui->pushButtonMarkAll, SIGNAL(clicked()),
	        this, SLOT(markAll()));
	connect(ui->pushButtonMarkNone, SIGNAL(clicked()),
	        this, SLOT(unmarkAll()));

	connect(ui->pushButtonSendQuery, SIGNAL(clicked()),
	        this, SLOT(sendQuery()));
	connect(ui->lineEditQuery, SIGNAL(returnPressed()),
		this, SLOT(sendQuery()));
	connect(ui->pushButtonAbortQuery, SIGNAL(clicked()),
	        this, SLOT(abortQuery()));
	connect(ui->lineEditQuery, SIGNAL(textEdited(QString)),
	        this, SLOT(resetNotFound()));
	//connect(ui->lineEditQuery, SIGNAL(editingFinished()), this, SLOT(sendQuery()));
	connect(countdownTimer, SIGNAL(timeout()), this, SLOT(updateCountdown()));

	QSortFilterProxyModel * filterProxyModel = new QSortFilterProxyModel(this);
	filterProxyModel->setSourceModel(candidateObjectsModel);
	filterProxyModel->setFilterCaseSensitivity(Qt::CaseInsensitive);
	ui->listViewObjects->setModel(filterProxyModel);
	connect(ui->lineEditSearch, SIGNAL(textChanged(const QString&)),
	        filterProxyModel, SLOT(setFilterFixedString(const QString&)));

	loadBookmarks();
	updateTexts();

	resetCountdown();
	resetDialog();
}

开发者ID:NGCyang，项目名称:stellarium，代码行数:60，代码来源:MpcImportWindow.cpp

示例3: KNMusicLibraryCategoryTab

KNMusicLibraryAlbumTab::KNMusicLibraryAlbumTab(QWidget *parent) :
    KNMusicLibraryCategoryTab(parent),
    m_tab(new KNCategoryTab(this)),
    m_showInAlbumTab(new QAction(this)),
    m_dropProxy(new KNDropProxyContainer(this)),
    m_albumDetail(new KNMusicAlbumDetail(m_dropProxy, this)),
    m_albumView(new KNMusicAlbumView(m_dropProxy)),
    m_albumModel(nullptr),
    m_libraryModel(nullptr)
{
    //Configure the tab button.
    m_tab->setIcon(QIcon(":/plugin/music/category/ablum.png"));
    //Configure the show in action.
    connect(m_showInAlbumTab, &QAction::triggered,
            this, &KNMusicLibraryAlbumTab::onActionShowInAlbum);
    //Configure the drop proxy container.
    m_dropProxy->setFocusProxy(m_albumView);
    setContentWidget(m_dropProxy);
    //Configure the album view.
    m_albumView->setAlbumDetail(m_albumDetail);

    //Initial the layout for the container, only for auto resize splitter.
    QBoxLayout *mainLayout=new QBoxLayout(QBoxLayout::LeftToRight, m_dropProxy);
    mainLayout->setContentsMargins(0,0,0,0);
    mainLayout->setSpacing(0);
    m_dropProxy->setLayout(mainLayout);
    //Add the album view to the main layout.
    mainLayout->addWidget(m_albumView);

    //Link retranslate.
    knI18n->link(this, &KNMusicLibraryAlbumTab::retranslate);
    retranslate();
}

开发者ID:CasparLi，项目名称:Mu，代码行数:33，代码来源:knmusiclibraryalbumtab.cpp

示例4: QMainWindow

MainWindow::MainWindow( QWidget* parent, Qt::WFlags flags )
    : QMainWindow( parent, flags )
{
    ui.setupUi(this);
    fillLanguages();
    retranslate();
}

开发者ID:Wolframe，项目名称:wolfclient，代码行数:7，代码来源:mainWindow.cpp

示例5: QObject

KNMusicGlobal::KNMusicGlobal(QObject *parent) :
    QObject(parent)
{
    //Initial global instance.
    m_global=KNGlobal::instance();
    //Register music metatypes.
    regMetaType();
    //Initial music types.
    initialFileType();
    //Initial threads.
    initialThreads();
    //Initial resources.
    initialHeaderText();
    initialGenreText();

    //Set the library path.
    setMusicLibraryPath(m_global->libraryPath()+"/Music");
    //Link the library changed request.
    connect(KNGlobal::instance(), &KNGlobal::libraryMoved,
            this, &KNMusicGlobal::onActionLibraryMoved);

    //Connect retranslate signal.
    connect(KNGlobal::instance(), &KNGlobal::requireRetranslate,
            this, &KNMusicGlobal::retranslate);
    //Get the latest translation.
    retranslate();
}

开发者ID:loki1412，项目名称:Mu，代码行数:27，代码来源:knmusicglobal.cpp

示例6: GETSTELMODULE

void FOVWindow::createDialogContent()
{
	fov = GETSTELMODULE(FOV);
	ui->setupUi(dialog);

	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
	connect(ui->TitleBar, SIGNAL(movedTo(QPoint)), this, SLOT(handleMovedTo(QPoint)));

	populateFOV();

	connect(ui->doubleSpinBoxFOV0, SIGNAL(valueChanged(double)), this, SLOT(updateFOV0(double)));
	connect(ui->doubleSpinBoxFOV1, SIGNAL(valueChanged(double)), this, SLOT(updateFOV1(double)));
	connect(ui->doubleSpinBoxFOV2, SIGNAL(valueChanged(double)), this, SLOT(updateFOV2(double)));
	connect(ui->doubleSpinBoxFOV3, SIGNAL(valueChanged(double)), this, SLOT(updateFOV3(double)));
	connect(ui->doubleSpinBoxFOV4, SIGNAL(valueChanged(double)), this, SLOT(updateFOV4(double)));
	connect(ui->doubleSpinBoxFOV5, SIGNAL(valueChanged(double)), this, SLOT(updateFOV5(double)));
	connect(ui->doubleSpinBoxFOV6, SIGNAL(valueChanged(double)), this, SLOT(updateFOV6(double)));
	connect(ui->doubleSpinBoxFOV7, SIGNAL(valueChanged(double)), this, SLOT(updateFOV7(double)));
	connect(ui->doubleSpinBoxFOV8, SIGNAL(valueChanged(double)), this, SLOT(updateFOV8(double)));
	connect(ui->doubleSpinBoxFOV9, SIGNAL(valueChanged(double)), this, SLOT(updateFOV9(double)));

	connect(ui->pushButtonSave, SIGNAL(clicked()), this, SLOT(saveFOVSettings()));
	connect(ui->pushButtonReset, SIGNAL(clicked()), this, SLOT(resetFOVSettings()));

	updateAboutText();	
}

开发者ID:NGCyang，项目名称:stellarium，代码行数:27，代码来源:FOVWindow.cpp

示例7: connect

// Initialize the dialog widgets and connect the signals/slots
void SupernovaeDialog::createDialogContent()
{
	ui->setupUi(dialog);
	ui->tabs->setCurrentIndex(0);	
	connect(&StelApp::getInstance(), SIGNAL(languageChanged()),
		this, SLOT(retranslate()));

	// Settings tab / updates group
	connect(ui->internetUpdatesCheckbox, SIGNAL(stateChanged(int)), this, SLOT(setUpdatesEnabled(int)));
	connect(ui->updateButton, SIGNAL(clicked()), this, SLOT(updateJSON()));
	connect(GETSTELMODULE(Supernovae), SIGNAL(updateStateChanged(Supernovae::UpdateState)), this, SLOT(updateStateReceiver(Supernovae::UpdateState)));
	connect(GETSTELMODULE(Supernovae), SIGNAL(jsonUpdateComplete(void)), this, SLOT(updateCompleteReceiver(void)));
	connect(ui->updateFrequencySpinBox, SIGNAL(valueChanged(int)), this, SLOT(setUpdateValues(int)));
	refreshUpdateValues(); // fetch values for last updated and so on
	// if the state didn't change, setUpdatesEnabled will not be called, so we force it
	setUpdatesEnabled(ui->internetUpdatesCheckbox->checkState());

	updateTimer = new QTimer(this);
	connect(updateTimer, SIGNAL(timeout()), this, SLOT(refreshUpdateValues()));
	updateTimer->start(7000);

	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));

	connect(ui->restoreDefaultsButton, SIGNAL(clicked()), this, SLOT(restoreDefaults()));
	connect(ui->saveSettingsButton, SIGNAL(clicked()), this, SLOT(saveSettings()));

	// About tab
	setAboutHtml();
	StelGui* gui = dynamic_cast<StelGui*>(StelApp::getInstance().getGui());
	Q_ASSERT(gui);
	ui->aboutTextBrowser->document()->setDefaultStyleSheet(QString(gui->getStelStyle().htmlStyleSheet));

	updateGuiFromSettings();

}

开发者ID:incadoi，项目名称:stellarium-1，代码行数:36，代码来源:SupernovaeDialog.cpp

示例8: connect

void KNMusicLibraryAlbumTab::setCategoryModel(KNMusicCategoryModelBase *model)
{
    //Check whether we set it before.
    if(m_albumModel!=nullptr)
    {
        return;
    }
    //Save category model pointer.
    m_albumModel=static_cast<KNMusicAlbumModel *>(model);
    //Check out the album model.
    if(m_albumModel==nullptr)
    {
        return;
    }

    //Do original set.
    KNMusicLibraryCategoryTab::setCategoryModel(model);
    //Link the artwork update signal.
    connect(m_albumModel, &KNMusicAlbumModel::albumRemoved,
            m_albumDetail, &KNMusicAlbumDetail::onActionAlbumRemoved);
    connect(m_albumModel, &KNMusicAlbumModel::albumArtUpdate,
            m_albumDetail, &KNMusicAlbumDetail::onActionAlbumArtUpdate);
    //Update the model.
    retranslate();

    //This should be done in constructor, but setModel() is a virtual
    //function, so we moved here.
    //Set the proxy model to album view.
    m_albumView->setModel(categoryProxyModel());
    //Set the default sort order.
    categoryProxyModel()->sort(0, Qt::AscendingOrder);
}

开发者ID:AnkyoChu，项目名称:Mu，代码行数:32，代码来源:knmusiclibraryalbumtab.cpp

示例9: connect

void DynamicPluginTemplateWindow::createDialogContent()
{
	ui->setupUi(dialog);

	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
}

开发者ID:argrento，项目名称:StellariumPluginTemplate，代码行数:7，代码来源:DynamicPluginTemplateWindow.cpp

示例10: KNMusicViewerItemBase

KNMusicListViewItem::KNMusicListViewItem(QObject *parent) :
    KNMusicViewerItemBase(parent)
{
    //Initial translation and icons.
    retranslate();

    //Initial the sort model.
    m_listViewModel=new KNMusicSortModel;
    m_listViewModel->setFilterKeyColumn(-1);
    m_listViewModel->setFilterCaseSensitivity(Qt::CaseInsensitive);
    m_listViewModel->setSortCaseSensitivity(Qt::CaseInsensitive);

    //Initial the view widget.
    m_libraryView=new KNMusicListView;
    m_libraryView->setModel(m_listViewModel);
    connect(m_libraryView, &KNMusicListView::requireOpenUrl,
            [=](const QModelIndex &index)
            {
                emit requireSetProxy(m_listViewModel);
                emit requirePlayMusic(m_listViewModel->mapToSource(index));
            });
    connect(m_libraryView, &KNMusicListView::requireShowContextMenu,
            this, &KNMusicListViewItem::onActionShowContextMenu);

    m_container=new KNMusicViewContainer;
    m_container->setCentralWidget(m_libraryView);
    connect(m_container, &KNMusicViewContainer::requireAnalysisUrls,
            this, &KNMusicListViewItem::requireAnalysisUrls);
    connect(m_container, &KNMusicViewContainer::dragEntered,
            this, &KNMusicListViewItem::dragEntered);
    connect(m_container, &KNMusicViewContainer::dropped,
            this, &KNMusicListViewItem::dropped);
}

开发者ID:Kreogist，项目名称:Nerve，代码行数:33，代码来源:knmusiclistviewitem.cpp

示例11: QObject

KNGlobal::KNGlobal(QObject *parent) :
    QObject(parent),
    m_preference(nullptr),
    m_globalConfigure(nullptr)
{
    //Initial the managers.
    //Gerenate the configure manager.
    KNConfigureManager::initial(this);
    //Generate the font manager.
    KNFontManager::initial(this);
    //Generate the locale manager.
    KNLocaleManager::initial(this);
    //Generate the theme manager.
    KNThemeManager::initial(this);

    //Initial the infrastructure.
    initialInfrastrcture();
    //Update the infrastructure.
    // Load the language.
    knI18n->setLanguage(userConfigure()->data("Language").toString());

    //Link the retranslate.
    knI18n->link(this, &KNGlobal::retranslate);
    retranslate();
}

开发者ID:delkyd，项目名称:Mu，代码行数:25，代码来源:knglobal.cpp

示例12: connect

void BookmarksDialog::createDialogContent()
{
	ui->setupUi(dialog);
	
	//Signals and slots
	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
	connect(ui->TitleBar, SIGNAL(movedTo(QPoint)), this, SLOT(handleMovedTo(QPoint)));

	connect(ui->addBookmarkButton, SIGNAL(clicked()), this, SLOT(addBookmarkButtonPressed()));
	connect(ui->removeBookmarkButton, SIGNAL(clicked()), this, SLOT(removeBookmarkButtonPressed()));
	connect(ui->goToButton, SIGNAL(clicked()), this, SLOT(goToBookmarkButtonPressed()));
	connect(ui->clearBookmarksButton, SIGNAL(clicked()), this, SLOT(clearBookmarksButtonPressed()));
	connect(ui->bookmarksTreeView, SIGNAL(doubleClicked(QModelIndex)), this, SLOT(selectCurrentBookmark(QModelIndex)));

	connect(ui->clearHighlightsButton, SIGNAL(clicked()), this, SLOT(clearHighlightsButtonPressed()));
	connect(ui->highlightBookmarksButton, SIGNAL(clicked()), this, SLOT(highlightBookrmarksButtonPressed()));

	connect(ui->importBookmarksButton, SIGNAL(clicked()), this, SLOT(importBookmarks()));
	connect(ui->exportBookmarksButton, SIGNAL(clicked()), this, SLOT(exportBookmarks()));

	//Initializing the list of bookmarks
	bookmarksListModel->setColumnCount(ColumnCount);
	setBookmarksHeaderNames();

	ui->bookmarksTreeView->setModel(bookmarksListModel);
	ui->bookmarksTreeView->header()->setSectionsMovable(false);
	ui->bookmarksTreeView->header()->setSectionResizeMode(ColumnName, QHeaderView::ResizeToContents);
	ui->bookmarksTreeView->header()->setStretchLastSection(true);
	ui->bookmarksTreeView->hideColumn(ColumnUUID);

	loadBookmarks();
}

开发者ID:Stellarium，项目名称:stellarium，代码行数:33，代码来源:BookmarksDialog.cpp

示例13: MenuButton

CameraButton::CameraButton(QWidget *parent) :
    MenuButton(parent), _bgImage(NULL),
    _logo(QImage("graphics/camera_logo.png"))
{
    retranslate();

}

开发者ID:timakima，项目名称:arteacher，代码行数:7，代码来源:camerabutton.cpp

示例14: QDialog

Export_Dialog::Export_Dialog(QWidget *parent) :
    QDialog(parent), canvas ( 0 )
{
    setupUi(this);
    setWindowIcon(load::icon("document-export"));
    connect(&Translator::object,SIGNAL(language_changed()),SLOT(retranslate()));
}

开发者ID:johan，项目名称:Knotter，代码行数:7，代码来源:export_dialog.cpp

示例15: GETSTELMODULE

void AngleMeasureDialog::createDialogContent()
{
	am = GETSTELMODULE(AngleMeasure);
	ui->setupUi(dialog);

	// Kinetic scrolling
	kineticScrollingList << ui->aboutTextBrowser;
	StelGui* gui= static_cast<StelGui*>(StelApp::getInstance().getGui());
	enableKineticScrolling(gui->getFlagUseKineticScrolling());
	connect(gui, SIGNAL(flagUseKineticScrollingChanged(bool)), this, SLOT(enableKineticScrolling(bool)));

	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
	connect(ui->TitleBar, SIGNAL(movedTo(QPoint)), this, SLOT(handleMovedTo(QPoint)));

	ui->useDmsFormatCheckBox->setChecked(am->isDmsFormat());
	connect(ui->useDmsFormatCheckBox, SIGNAL(toggled(bool)), am, SLOT(useDmsFormat(bool)));
	ui->showPositionAngleCheckBox->setChecked(am->isPaDisplayed());
	connect(ui->showPositionAngleCheckBox, SIGNAL(toggled(bool)), am, SLOT(showPositionAngle(bool)));
	ui->showPositionAngleHorizontalCheckBox->setChecked(am->isHorPaDisplayed());
	connect(ui->showPositionAngleHorizontalCheckBox, SIGNAL(toggled(bool)), am, SLOT(showPositionAngleHor(bool)));
	ui->showEquatorial_GroupBox->setChecked(am->isEquatorial());
	connect(ui->showEquatorial_GroupBox, SIGNAL(toggled(bool)), am, SLOT(showEquatorial(bool)));
	ui->showHorizontal_GroupBox->setChecked(am->isHorizontal());
	connect(ui->showHorizontal_GroupBox, SIGNAL(toggled(bool)), am, SLOT(showHorizontal(bool)));
	ui->azAltStartOnSkyCheckBox->setChecked(am->isHorizontalStartSkylinked());
	connect(ui->azAltStartOnSkyCheckBox, SIGNAL(toggled(bool)), am, SLOT(showHorizontalStartSkylinked(bool)));
	ui->azAltEndOnSkyCheckBox->setChecked(am->isHorizontalEndSkylinked());
	connect(ui->azAltEndOnSkyCheckBox, SIGNAL(toggled(bool)), am, SLOT(showHorizontalEndSkylinked(bool)));

	connect(ui->restoreDefaultsButton, SIGNAL(clicked()), this, SLOT(resetAngleMeasureSettings()));

	setAboutHtml();
}

开发者ID:Stellarium，项目名称:stellarium，代码行数:34，代码来源:AngleMeasureDialog.cpp

示例16: QObject

KNMusicSearchSyntaxEngine::KNMusicSearchSyntaxEngine(QObject *parent) :
    QObject(parent)
{
    //Link with the locale manager.
    knI18n->link(this, &KNMusicSearchSyntaxEngine::retranslate);
    retranslate();
}

开发者ID:AnkyoChu，项目名称:Mu，代码行数:7，代码来源:knmusicsearchsyntaxengine.cpp

示例17: connect

// Initialize the dialog widgets and connect the signals/slots
void TelescopeConfigurationDialog::createDialogContent()
{
	ui->setupUi(dialog);
	
	//Inherited connect
	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(buttonDiscardPressed()));
	connect(dialog, SIGNAL(rejected()), this, SLOT(buttonDiscardPressed()));
	
	//Connect: sender, signal, receiver, member
	connect(ui->radioButtonTelescopeLocal, SIGNAL(toggled(bool)), this, SLOT(toggleTypeLocal(bool)));
	connect(ui->radioButtonTelescopeConnection, SIGNAL(toggled(bool)), this, SLOT(toggleTypeConnection(bool)));
	connect(ui->radioButtonTelescopeVirtual, SIGNAL(toggled(bool)), this, SLOT(toggleTypeVirtual(bool)));
	
	connect(ui->pushButtonSave, SIGNAL(clicked()), this, SLOT(buttonSavePressed()));
	connect(ui->pushButtonDiscard, SIGNAL(clicked()), this, SLOT(buttonDiscardPressed()));
	
	connect(ui->comboBoxDeviceModel, SIGNAL(currentIndexChanged(const QString&)), this, SLOT(deviceModelSelected(const QString&)));
	
	//Setting validators
	ui->lineEditTelescopeName->setValidator(telescopeNameValidator);
	ui->lineEditHostName->setValidator(hostNameValidator);
	ui->lineEditCircleList->setValidator(circleListValidator);
	ui->lineEditSerialPort->setValidator(serialPortValidator);
}

开发者ID:EvilTosha，项目名称:Stellarium-GSoC12，代码行数:26，代码来源:TelescopeConfigurationDialog.cpp

示例18: connect

void ScriptConsole::createDialogContent()
{
	ui->setupUi(dialog);
	connect(&StelApp::getInstance(), SIGNAL(languageChanged()), this, SLOT(retranslate()));

	highlighter = new StelScriptSyntaxHighlighter(ui->scriptEdit->document());
	ui->includeEdit->setText(StelFileMgr::getInstallationDir() + "/scripts");

	ui->quickrunCombo->addItem(q_("quickrun..."));
	ui->quickrunCombo->addItem(q_("selected text"));
	ui->quickrunCombo->addItem(q_("clear text"));
	ui->quickrunCombo->addItem(q_("clear images"));
	ui->quickrunCombo->addItem(q_("natural"));
	ui->quickrunCombo->addItem(q_("starchart"));

	connect(ui->scriptEdit, SIGNAL(cursorPositionChanged()), this, SLOT(rowColumnChanged()));
	connect(ui->closeStelWindow, SIGNAL(clicked()), this, SLOT(close()));
	connect(ui->TitleBar, SIGNAL(movedTo(QPoint)), this, SLOT(handleMovedTo(QPoint)));
	connect(ui->loadButton, SIGNAL(clicked()), this, SLOT(loadScript()));
	connect(ui->saveButton, SIGNAL(clicked()), this, SLOT(saveScript()));
	connect(ui->clearButton, SIGNAL(clicked()), this, SLOT(clearButtonPressed()));
	connect(ui->preprocessSSCButton, SIGNAL(clicked()), this, SLOT(preprocessScript()));
	connect(ui->runButton, SIGNAL(clicked()), this, SLOT(runScript()));
	connect(ui->stopButton, SIGNAL(clicked()), &StelApp::getInstance().getScriptMgr(), SLOT(stopScript()));
	connect(ui->includeBrowseButton, SIGNAL(clicked()), this, SLOT(includeBrowse()));
	connect(ui->quickrunCombo, SIGNAL(currentIndexChanged(int)), this, SLOT(quickRun(int)));
	connect(&StelApp::getInstance().getScriptMgr(), SIGNAL(scriptRunning()), this, SLOT(scriptStarted()));
	connect(&StelApp::getInstance().getScriptMgr(), SIGNAL(scriptStopped()), this, SLOT(scriptEnded()));
	connect(&StelApp::getInstance().getScriptMgr(), SIGNAL(scriptDebug(const QString&)), this, SLOT(appendLogLine(const QString&)));
	connect(&StelApp::getInstance().getScriptMgr(), SIGNAL(scriptOutput(const QString&)), this, SLOT(appendOutputLine(const QString&)));
	ui->tabs->setCurrentIndex(0);
	ui->scriptEdit->setFocus();
}

开发者ID:PhiTheta，项目名称:stellarium，代码行数:33，代码来源:ScriptConsole.cpp

示例19: QWidget

KNMusicPlaylistDisplay::KNMusicPlaylistDisplay(QWidget *parent) :
    QWidget(parent)
{
    //Set properties.
    setContentsMargins(0,0,0,0);

    //Add layout.
    QBoxLayout *displayLayout=new QBoxLayout(QBoxLayout::TopToBottom,
                                             this);
    displayLayout->setContentsMargins(0,0,0,0);
    displayLayout->setSpacing(0);
    setLayout(displayLayout);

    //Initial the labels.
    initialLabels();
    initialTreeView();
    initialControls();

    //Initial information container.
    KNMouseSenseWidget *infoContainer=new KNMouseSenseWidget(this);
    infoContainer->setContentsMargins(20,12,0,8);
    QBoxLayout *infoLayout=new QBoxLayout(QBoxLayout::TopToBottom,
                                          infoContainer);
    infoLayout->setContentsMargins(0,0,0,0);
    infoLayout->setSpacing(0);
    infoContainer->setLayout(infoLayout);

    displayLayout->addWidget(infoContainer);

    //Initial the information label.
    infoLayout->addWidget(m_playlistTitle);
    QBoxLayout *detailLayout=new QBoxLayout(QBoxLayout::LeftToRight,
                                            infoLayout->widget());
    detailLayout->setContentsMargins(0,0,0,0);
    detailLayout->setSpacing(5);
    detailLayout->addWidget(m_playlistDetail);
    detailLayout->addWidget(m_playPlaylist);
    detailLayout->addWidget(m_addToPlaylist);
    detailLayout->addStretch();
    infoLayout->addLayout(detailLayout);

    displayLayout->addWidget(m_playlistTreeView, 1);

    //Initial playlist connection handler.
    m_modelSignalHandler=new KNConnectionHandler(this);

    //Initial the shadow.
    m_leftShadow=new KNSideShadowWidget(LeftShadow, this);

    //Connect search signal.
    connect(KNMusicGlobal::musicSearch(), SIGNAL(requireSearch(QString)),
            this, SLOT(updatePlaylistTitle()));

    //Connect retranslate signal.
    connect(KNGlobal::instance(), &KNGlobal::requireRetranslate,
            this, &KNMusicPlaylistDisplay::retranslate);
    //Do retranslate.
    retranslate();
}

开发者ID:loki1412，项目名称:Mu，代码行数:59，代码来源:knmusicplaylistdisplay.cpp

示例20: QDialog

KCMailReports::KCMailReports(QWidget *parent) :
    QDialog(parent)
{   
    setMinimumSize(480,320);
    mode=BugReportMode;
    titlePrefix[BugReportMode]="Bug: ";
    titlePrefix[FeedbackReportMode]="Feedback: ";
    retranslate();

    pal=palette();
    pal.setColor(QPalette::Highlight, QColor(0,0,0,255));
    setPalette(pal);

    QVBoxLayout *mainLayout=new QVBoxLayout(this);
    setLayout(mainLayout);
    mailTitle=new QLineEdit(this);
    pal=mailTitle->palette();
    pal.setColor(QPalette::Highlight, QColor(0xf7,0xcf,0x3d));
    mailTitle->setPalette(pal);
    mainLayout->addWidget(mailTitle);

    mailContent=new QPlainTextEdit(this);
    pal=mailContent->palette();
    pal.setColor(QPalette::Highlight, QColor(0xf7,0xcf,0x3d));
    mailContent->setPalette(pal);
    mainLayout->addWidget(mailContent, 1);

    buttonLayout=new QHBoxLayout();

    sendReport=new QPushButton(this);
    sendReport->setFixedHeight(30);
    pal=sendReport->palette();
    disabledButtonState();
    buttonLayout->addWidget(sendReport);
    cancelSending=new QPushButton(this);
    cancelSending->setFixedHeight(30);
    cancelSending->setText(tr("Cancel"));
    buttonLayout->addWidget(cancelSending);
    mainLayout->addLayout(buttonLayout);

    setMode(mode);
    instance=KCMailProcessObject::getInstance();
    connect(mailContent, SIGNAL(textChanged()),
            this, SLOT(buttonStatusSet()));
    connect(mailTitle, SIGNAL(textChanged(QString)),
            this, SLOT(buttonStatusSet()));
    connect(sendReport, SIGNAL(clicked()),
            this, SLOT(sendReports()));
    connect(instance, SIGNAL(statusChanged(KCMailProcessObject::SendingStatus)),
            this, SLOT(refreshStatus(KCMailProcessObject::SendingStatus)));
    connect(cancelSending, SIGNAL(clicked()),
            this, SLOT(close()));

    reportStatus=new KCMailSendingStatus(this);
    reportStatus->setGeometry(reportStatus->x(),
                              0-reportStatus->height()-30,
                              reportStatus->width(),
                              reportStatus->height());
}

开发者ID:Kreogist，项目名称:Cuties，代码行数:59，代码来源:kcmailreports.cpp

注：本文中的retranslate函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ retrieveTimelineAgent函数代码示例发布时间：2022-05-30

C++ retain函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19175|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9986|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9654|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8621|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ retranslate函数代码示例

示例1: connect

示例2: connect

示例3: KNMusicLibraryCategoryTab

示例4: QMainWindow

示例5: QObject

示例6: GETSTELMODULE

示例7: connect

示例8: connect

示例9: connect

示例10: KNMusicViewerItemBase

示例11: QObject

示例12: connect

示例13: MenuButton

示例14: QDialog

示例15: GETSTELMODULE

示例16: QObject

示例17: connect

示例18: connect

示例19: QWidget

示例20: QDialog

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2366

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053