C++ restoreFETDialogGeometry函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中restoreFETDialogGeometry函数的典型用法代码示例。如果您正苦于以下问题：C++ restoreFETDialogGeometry函数的具体用法？C++ restoreFETDialogGeometry怎么用？C++ restoreFETDialogGeometry使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了restoreFETDialogGeometry函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: QDialog

ModifyConstraintTwoActivitiesGroupedForm::ModifyConstraintTwoActivitiesGroupedForm(QWidget* parent, ConstraintTwoActivitiesGrouped* ctr): QDialog(parent)
{
	setupUi(this);

	okPushButton->setDefault(true);

	connect(okPushButton, SIGNAL(clicked()), this, SLOT(ok()));
	connect(cancelPushButton, SIGNAL(clicked()), this, SLOT(cancel()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp5=firstActivitiesComboBox->minimumSizeHint();
	Q_UNUSED(tmp5);
	QSize tmp6=secondActivitiesComboBox->minimumSizeHint();
	Q_UNUSED(tmp6);
	
	firstActivitiesComboBox->setMaximumWidth(maxRecommendedWidth(this));
	secondActivitiesComboBox->setMaximumWidth(maxRecommendedWidth(this));
	
	this->_ctr=ctr;
	
	weightLineEdit->setText(CustomFETString::number(ctr->weightPercentage));

	updateActivitiesComboBox();

	constraintChanged();
}

开发者ID:karandit，项目名称:fet，代码行数:28，代码来源:modifyconstrainttwoactivitiesgroupedform.cpp

示例2: QDialog

ModifyConstraintSubjectActivityTagPreferredRoomForm::ModifyConstraintSubjectActivityTagPreferredRoomForm(QWidget* parent, ConstraintSubjectActivityTagPreferredRoom* ctr): QDialog(parent)
{
    setupUi(this);

    okPushButton->setDefault(true);

    connect(cancelPushButton, SIGNAL(clicked()), this, SLOT(cancel()));
    connect(okPushButton, SIGNAL(clicked()), this, SLOT(ok()));

    centerWidgetOnScreen(this);
    restoreFETDialogGeometry(this);

    QSize tmp3=subjectsComboBox->minimumSizeHint();
    Q_UNUSED(tmp3);
    QSize tmp4=activityTagsComboBox->minimumSizeHint();
    Q_UNUSED(tmp4);

    QSize tmp5=roomsComboBox->minimumSizeHint();
    Q_UNUSED(tmp5);

    this->_ctr=ctr;

    weightLineEdit->setText(CustomFETString::number(ctr->weightPercentage));

    updateSubjectsComboBox();
    updateActivityTagsComboBox();
    updateRoomsComboBox();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:28，代码来源:modifyconstraintsubjectactivitytagpreferredroomform.cpp

示例3: QDialog

ModifyConstraintTeacherMaxDaysPerWeekForm::ModifyConstraintTeacherMaxDaysPerWeekForm(QWidget* parent, ConstraintTeacherMaxDaysPerWeek* ctr): QDialog(parent)
{
	setupUi(this);

	okPushButton->setDefault(true);

	connect(okPushButton, SIGNAL(clicked()), this, SLOT(ok()));
	connect(cancelPushButton, SIGNAL(clicked()), this, SLOT(cancel()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp1=teachersComboBox->minimumSizeHint();
	Q_UNUSED(tmp1);
	
	this->_ctr=ctr;
	
	weightLineEdit->setText(CustomFETString::number(ctr->weightPercentage));
	
	updateMaxDaysSpinBox();
	updateTeachersComboBox();
	
	maxDaysSpinBox->setValue(ctr->maxDaysPerWeek);

	constraintChanged();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:26，代码来源:modifyconstraintteachermaxdaysperweekform.cpp

示例4: QDialog

AddConstraintActivitiesPreferredStartingTimesForm::AddConstraintActivitiesPreferredStartingTimesForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);

	addConstraintPushButton->setDefault(true);

	connect(preferredTimesTable, SIGNAL(itemClicked(QTableWidgetItem*)), this, SLOT(itemClicked(QTableWidgetItem*)));
	connect(addConstraintPushButton, SIGNAL(clicked()), this, SLOT(addConstraint()));
	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(setAllAllowedPushButton, SIGNAL(clicked()), this, SLOT(setAllSlotsAllowed()));
	connect(setAllNotAllowedPushButton, SIGNAL(clicked()), this, SLOT(setAllSlotsNotAllowed()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp1=teachersComboBox->minimumSizeHint();
	Q_UNUSED(tmp1);
	QSize tmp2=studentsComboBox->minimumSizeHint();
	Q_UNUSED(tmp2);
	QSize tmp3=subjectsComboBox->minimumSizeHint();
	Q_UNUSED(tmp3);
	QSize tmp4=activityTagsComboBox->minimumSizeHint();
	Q_UNUSED(tmp4);
	
	updateTeachersComboBox();
	updateStudentsComboBox();
	updateSubjectsComboBox();
	updateActivityTagsComboBox();

	preferredTimesTable->setRowCount(gt.rules.nHoursPerDay);
	preferredTimesTable->setColumnCount(gt.rules.nDaysPerWeek);

	for(int j=0; j<gt.rules.nDaysPerWeek; j++){
		QTableWidgetItem* item=new QTableWidgetItem(gt.rules.daysOfTheWeek[j]);
		preferredTimesTable->setHorizontalHeaderItem(j, item);
	}
	for(int i=0; i<gt.rules.nHoursPerDay; i++){
		QTableWidgetItem* item=new QTableWidgetItem(gt.rules.hoursOfTheDay[i]);
		preferredTimesTable->setVerticalHeaderItem(i, item);
	}

	for(int i=0; i<gt.rules.nHoursPerDay; i++)
		for(int j=0; j<gt.rules.nDaysPerWeek; j++){
			QTableWidgetItem* item=new QTableWidgetItem(YES);
			item->setTextAlignment(Qt::AlignCenter);
			item->setFlags(Qt::ItemIsSelectable | Qt::ItemIsEnabled);
			colorItem(item);
			preferredTimesTable->setItem(i, j, item);
		}
		
	preferredTimesTable->resizeRowsToContents();
	connect(preferredTimesTable->horizontalHeader(), SIGNAL(sectionClicked(int)), this, SLOT(horizontalHeaderClicked(int)));
	connect(preferredTimesTable->verticalHeader(), SIGNAL(sectionClicked(int)), this, SLOT(verticalHeaderClicked(int)));
	
	preferredTimesTable->setSelectionMode(QAbstractItemView::NoSelection);

	tableWidgetUpdateBug(preferredTimesTable);
	
	setStretchAvailabilityTableNicely(preferredTimesTable);
}

开发者ID:vanyog，项目名称:FET，代码行数:60，代码来源:addconstraintactivitiespreferredstartingtimesform.cpp

示例5: QDialog

AddConstraintStudentsSetIntervalMaxDaysPerWeekForm::AddConstraintStudentsSetIntervalMaxDaysPerWeekForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);

	addConstraintPushButton->setDefault(true);

	connect(addConstraintPushButton, SIGNAL(clicked()), this, SLOT(addCurrentConstraint()));
	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);
	
	QSize tmp2=studentsComboBox->minimumSizeHint();
	Q_UNUSED(tmp2);

	QSize tmp5=startHourComboBox->minimumSizeHint();
	Q_UNUSED(tmp5);
	QSize tmp6=endHourComboBox->minimumSizeHint();
	Q_UNUSED(tmp6);

	updateMaxDaysSpinBox();
	updateStudentsComboBox();
	updateStartHoursComboBox();
	updateEndHoursComboBox();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:25，代码来源:addconstraintstudentssetintervalmaxdaysperweekform.cpp

示例6: QDialog

AddConstraintSubjectPreferredRoomsForm::AddConstraintSubjectPreferredRoomsForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);

	addConstraintPushButton->setDefault(true);
	
	roomsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);
	selectedRoomsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);

	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(addConstraintPushButton, SIGNAL(clicked()), this, SLOT(addConstraint()));
	connect(roomsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(addRoom()));
	connect(selectedRoomsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(removeRoom()));
	connect(clearPushButton, SIGNAL(clicked()), this, SLOT(clear()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp3=subjectsComboBox->minimumSizeHint();
	Q_UNUSED(tmp3);
	
	updateRoomsListWidget();
	
	for(int i=0; i<gt.rules.subjectsList.size(); i++){
		Subject* sb=gt.rules.subjectsList[i];
		subjectsComboBox->addItem(sb->name);
	}
}

开发者ID:vanyog，项目名称:FET，代码行数:28，代码来源:addconstraintsubjectpreferredroomsform.cpp

示例7: QDialog

BuildingsForm::BuildingsForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);
	
	currentBuildingTextEdit->setReadOnly(true);

	modifyBuildingPushButton->setDefault(true);

	buildingsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);

	connect(addBuildingPushButton, SIGNAL(clicked()), this, SLOT(addBuilding()));
	connect(removeBuildingPushButton, SIGNAL(clicked()), this, SLOT(removeBuilding()));
	connect(buildingsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(buildingChanged(int)));
	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(modifyBuildingPushButton, SIGNAL(clicked()), this, SLOT(modifyBuilding()));

	connect(moveBuildingUpPushButton, SIGNAL(clicked()), this, SLOT(moveBuildingUp()));
	connect(moveBuildingDownPushButton, SIGNAL(clicked()), this, SLOT(moveBuildingDown()));

	connect(sortBuildingsPushButton, SIGNAL(clicked()), this, SLOT(sortBuildings()));
	connect(buildingsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(modifyBuilding()));

	connect(commentsPushButton, SIGNAL(clicked()), this, SLOT(comments()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);
	//restore splitter state
	QSettings settings(COMPANY, PROGRAM);
	if(settings.contains(this->metaObject()->className()+QString("/splitter-state")))
		splitter->restoreState(settings.value(this->metaObject()->className()+QString("/splitter-state")).toByteArray());
	
	this->filterChanged();
}

开发者ID:karandit，项目名称:fet，代码行数:33，代码来源:buildingsform.cpp

示例8: dialog

void TimetableGenerateForm::seeInitialOrder()
{
	QString s=initialOrderOfActivities;

	//show the message in a dialog
	QDialog dialog(this);
	
	dialog.setWindowTitle(tr("FET - information about initial order of evaluation of activities"));

	QVBoxLayout* vl=new QVBoxLayout(&dialog);
	QPlainTextEdit* te=new QPlainTextEdit();
	te->setPlainText(s);
	te->setReadOnly(true);
	QPushButton* pb=new QPushButton(tr("OK"));

	QHBoxLayout* hl=new QHBoxLayout(0);
	hl->addStretch(1);
	hl->addWidget(pb);

	vl->addWidget(te);
	vl->addLayout(hl);
	connect(pb, SIGNAL(clicked()), &dialog, SLOT(close()));

	dialog.resize(700,500);
	centerWidgetOnScreen(&dialog);
	restoreFETDialogGeometry(&dialog, settingsName);

	setParentAndOtherThings(&dialog, this);
	dialog.exec();
	saveFETDialogGeometry(&dialog, settingsName);
}

开发者ID:vanyog，项目名称:FET，代码行数:31，代码来源:timetablegenerateform.cpp

示例9: last

void TimetableGenerateForm::seeImpossible()
{
	QString s;

	myMutex.lock();

	s+=TimetableGenerateForm::tr("Information relating difficult to schedule activities:");
	s+="\n\n";
	s+=TimetableGenerateForm::tr("Please check the constraints related to the last "
	 "activities in the list below, which might be difficult to schedule:");
	s+="\n\n";
	s+=TimetableGenerateForm::tr("Here are the placed activities which lead to a difficulty, "
	 "in order from the first one to the last (the last one FET failed to schedule "
	 "and the last ones are difficult):");
	s+="\n\n";
	for(int i=0; i<gen.nDifficultActivities; i++){
		int ai=gen.difficultActivities[i];

		s+=TimetableGenerateForm::tr("No: %1").arg(i+1);

		s+=", ";

		s+=TimetableGenerateForm::tr("Id: %1 (%2)", "%1 is id of activity, %2 is detailed description of activity")
			.arg(gt.rules.internalActivitiesList[ai].id)
			.arg(getActivityDetailedDescription(gt.rules, gt.rules.internalActivitiesList[ai].id));

		s+="\n";
	}

	myMutex.unlock();
	
	//show the message in a dialog
	QDialog dialog(this);
	
	dialog.setWindowTitle(tr("FET - information about difficult activities"));

	QVBoxLayout* vl=new QVBoxLayout(&dialog);
	QPlainTextEdit* te=new QPlainTextEdit();
	te->setPlainText(s);
	te->setReadOnly(true);
	QPushButton* pb=new QPushButton(tr("OK"));

	QHBoxLayout* hl=new QHBoxLayout(0);
	hl->addStretch(1);
	hl->addWidget(pb);

	vl->addWidget(te);
	vl->addLayout(hl);
	connect(pb, SIGNAL(clicked()), &dialog, SLOT(close()));

	dialog.resize(700,500);
	centerWidgetOnScreen(&dialog);
	restoreFETDialogGeometry(&dialog, settingsName);

	setParentAndOtherThings(&dialog, this);
	dialog.exec();
	saveFETDialogGeometry(&dialog, settingsName);
}

开发者ID:vanyog，项目名称:FET，代码行数:58，代码来源:timetablegenerateform.cpp

示例10: tr

void SubjectsForm::comments()
{
	int ind=subjectsListWidget->currentRow();
	if(ind<0){
		QMessageBox::information(this, tr("FET information"), tr("Invalid selected subject"));
		return;
	}
	
	Subject* sbj=gt.rules.subjectsList[ind];
	assert(sbj!=NULL);

	QDialog getCommentsDialog(this);
	
	getCommentsDialog.setWindowTitle(tr("Subject comments"));
	
	QPushButton* okPB=new QPushButton(tr("OK"));
	okPB->setDefault(true);
	QPushButton* cancelPB=new QPushButton(tr("Cancel"));
	
	connect(okPB, SIGNAL(clicked()), &getCommentsDialog, SLOT(accept()));
	connect(cancelPB, SIGNAL(clicked()), &getCommentsDialog, SLOT(reject()));

	QHBoxLayout* hl=new QHBoxLayout();
	hl->addStretch();
	hl->addWidget(okPB);
	hl->addWidget(cancelPB);
	
	QVBoxLayout* vl=new QVBoxLayout();
	
	QPlainTextEdit* commentsPT=new QPlainTextEdit();
	commentsPT->setPlainText(sbj->comments);
	commentsPT->selectAll();
	commentsPT->setFocus();
	
	vl->addWidget(commentsPT);
	vl->addLayout(hl);
	
	getCommentsDialog.setLayout(vl);
	
	const QString settingsName=QString("SubjectCommentsDialog");
	
	getCommentsDialog.resize(500, 320);
	centerWidgetOnScreen(&getCommentsDialog);
	restoreFETDialogGeometry(&getCommentsDialog, settingsName);
	
	int t=getCommentsDialog.exec();
	saveFETDialogGeometry(&getCommentsDialog, settingsName);
	
	if(t==QDialog::Accepted){
		sbj->comments=commentsPT->toPlainText();
	
		gt.rules.internalStructureComputed=false;
		setRulesModifiedAndOtherThings(&gt.rules);

		subjectChanged(ind);
	}
}

开发者ID:karandit，项目名称:fet，代码行数:57，代码来源:subjectsform.cpp

示例11: QDialog

AddBuildingForm::AddBuildingForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);
	
	addBuildingPushButton->setDefault(true);

	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(addBuildingPushButton, SIGNAL(clicked()), this, SLOT(addBuilding()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);
}

开发者ID:karandit，项目名称:fet，代码行数:12，代码来源:addbuildingform.cpp

示例12: QDialog

ConstraintSubjectActivityTagPreferredRoomForm::ConstraintSubjectActivityTagPreferredRoomForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);

	currentConstraintTextEdit->setReadOnly(true);
	
	modifyConstraintPushButton->setDefault(true);

	constraintsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);

	connect(constraintsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(constraintChanged(int)));
	connect(addConstraintPushButton, SIGNAL(clicked()), this, SLOT(addConstraint()));
	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(removeConstraintPushButton, SIGNAL(clicked()), this, SLOT(removeConstraint()));
	connect(modifyConstraintPushButton, SIGNAL(clicked()), this, SLOT(modifyConstraint()));
	connect(roomsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));
	connect(subjectsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));
	connect(constraintsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(modifyConstraint()));
	connect(activityTagsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp3=subjectsComboBox->minimumSizeHint();
	Q_UNUSED(tmp3);
	QSize tmp4=activityTagsComboBox->minimumSizeHint();
	Q_UNUSED(tmp4);

	QSize tmp5=roomsComboBox->minimumSizeHint();
	Q_UNUSED(tmp5);
	
	roomsComboBox->addItem("");
	for(int i=0; i<gt.rules.roomsList.size(); i++){
		Room* rm=gt.rules.roomsList[i];
		roomsComboBox->addItem(rm->name);
	}

	subjectsComboBox->addItem("");
	for(int i=0; i<gt.rules.subjectsList.size(); i++){
		Subject* sb=gt.rules.subjectsList[i];
		subjectsComboBox->addItem(sb->name);
	}

	activityTagsComboBox->addItem("");
	for(int i=0; i<gt.rules.activityTagsList.size(); i++){
		ActivityTag* sb=gt.rules.activityTagsList[i];
		activityTagsComboBox->addItem(sb->name);
	}

	this->filterChanged();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:51，代码来源:constraintsubjectactivitytagpreferredroomform.cpp

示例13: QDialog

ConstraintStudentsSetActivityTagMaxHoursDailyForm::ConstraintStudentsSetActivityTagMaxHoursDailyForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);

	currentConstraintTextEdit->setReadOnly(true);
	
	modifyConstraintPushButton->setDefault(true);

	constraintsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);

	connect(constraintsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(constraintChanged(int)));
	connect(addConstraintPushButton, SIGNAL(clicked()), this, SLOT(addConstraint()));
	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(removeConstraintPushButton, SIGNAL(clicked()), this, SLOT(removeConstraint()));
	connect(modifyConstraintPushButton, SIGNAL(clicked()), this, SLOT(modifyConstraint()));
	connect(studentsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));
	connect(constraintsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(modifyConstraint()));
	connect(activityTagsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));
	connect(helpPushButton, SIGNAL(clicked()), this, SLOT(help()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp2=studentsComboBox->minimumSizeHint();
	Q_UNUSED(tmp2);
	QSize tmp4=activityTagsComboBox->minimumSizeHint();
	Q_UNUSED(tmp4);
	
	studentsComboBox->addItem("");

	for(int i=0; i<gt.rules.yearsList.size(); i++){
		StudentsYear* sty=gt.rules.yearsList[i];
		studentsComboBox->addItem(sty->name);
		for(int j=0; j<sty->groupsList.size(); j++){
			StudentsGroup* stg=sty->groupsList[j];
			studentsComboBox->addItem(stg->name);
			if(SHOW_SUBGROUPS_IN_COMBO_BOXES) for(int k=0; k<stg->subgroupsList.size(); k++){
				StudentsSubgroup* sts=stg->subgroupsList[k];
				studentsComboBox->addItem(sts->name);
			}
		}
	}
	
	activityTagsComboBox->clear();
	activityTagsComboBox->addItem("");
	foreach(ActivityTag* at, gt.rules.activityTagsList)
		activityTagsComboBox->addItem(at->name);

	this->filterChanged();
}

开发者ID:vanyog，项目名称:FET，代码行数:50，代码来源:constraintstudentssetactivitytagmaxhoursdailyform.cpp

示例14: QDialog

ConstraintStudentsSetHomeRoomForm::ConstraintStudentsSetHomeRoomForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);

	currentConstraintTextEdit->setReadOnly(true);
	
	modifyConstraintPushButton->setDefault(true);

	constraintsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);

	connect(constraintsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(constraintChanged(int)));
	connect(addConstraintPushButton, SIGNAL(clicked()), this, SLOT(addConstraint()));
	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));
	connect(removeConstraintPushButton, SIGNAL(clicked()), this, SLOT(removeConstraint()));
	connect(modifyConstraintPushButton, SIGNAL(clicked()), this, SLOT(modifyConstraint()));
	connect(constraintsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(modifyConstraint()));
	connect(studentsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));
	connect(roomsComboBox, SIGNAL(activated(QString)), this, SLOT(filterChanged()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp2=studentsComboBox->minimumSizeHint();
	Q_UNUSED(tmp2);
	
	QSize tmp5=roomsComboBox->minimumSizeHint();
	Q_UNUSED(tmp5);
	
	studentsComboBox->addItem("");

	for(int i=0; i<gt.rules.yearsList.size(); i++){
		StudentsYear* sty=gt.rules.yearsList[i];
		studentsComboBox->addItem(sty->name);
		for(int j=0; j<sty->groupsList.size(); j++){
			StudentsGroup* stg=sty->groupsList[j];
			studentsComboBox->addItem(stg->name);
			for(int k=0; k<stg->subgroupsList.size(); k++){
				StudentsSubgroup* sts=stg->subgroupsList[k];
				studentsComboBox->addItem(sts->name);
			}
		}
	}
	
	roomsComboBox->addItem("");
	foreach(Room* rm, gt.rules.roomsList)
		roomsComboBox->addItem(rm->name);

	this->filterChanged();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:49，代码来源:constraintstudentssethomeroomform.cpp

示例15: QDialog

HelpTipsForm::HelpTipsForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);
	
	closePushButton->setDefault(true);
	
	plainTextEdit->setReadOnly(true);

	connect(closePushButton, SIGNAL(clicked()), this, SLOT(close()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);
	
	setText();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:15，代码来源:helptipsform.cpp

示例16: QDialog

InstitutionNameForm::InstitutionNameForm(QWidget* parent): QDialog(parent)
{
	setupUi(this);
	
	okPushButton->setDefault(true);

	connect(cancelPushButton, SIGNAL(clicked()), this, SLOT(cancel()));
	connect(okPushButton, SIGNAL(clicked()), this, SLOT(ok()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);
	
	institutionNameLineEdit->setText(gt.rules.institutionName);
	institutionNameLineEdit->selectAll();
	institutionNameLineEdit->setFocus();
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:16，代码来源:institutionnameform.cpp

示例17: QDialog

ModifyConstraintActivityPreferredRoomsForm::ModifyConstraintActivityPreferredRoomsForm(QWidget* parent, ConstraintActivityPreferredRooms* ctr): QDialog(parent)
{
	setupUi(this);

	okPushButton->setDefault(true);
	
	roomsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);
	selectedRoomsListWidget->setSelectionMode(QAbstractItemView::SingleSelection);

	connect(cancelPushButton, SIGNAL(clicked()), this, SLOT(cancel()));
	connect(okPushButton, SIGNAL(clicked()), this, SLOT(ok()));
	connect(roomsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(addRoom()));
	connect(selectedRoomsListWidget, SIGNAL(itemDoubleClicked(QListWidgetItem*)), this, SLOT(removeRoom()));
	connect(clearPushButton, SIGNAL(clicked()), this, SLOT(clear()));

	centerWidgetOnScreen(this);
	restoreFETDialogGeometry(this);

	QSize tmp5=activitiesComboBox->minimumSizeHint();
	Q_UNUSED(tmp5);
	
	activitiesComboBox->setMaximumWidth(maxRecommendedWidth(this));
	
	updateRoomsListWidget();

	int j=-1, i=0;
	for(int k=0; k<gt.rules.activitiesList.size(); k++){
		Activity* ac=gt.rules.activitiesList[k];
		activitiesComboBox->addItem(ac->getDescription(gt.rules));
		if(ac->id==ctr->activityId){
			assert(j==-1);
			j=i;
		}
		i++;
	}
	assert(j>=0);
	activitiesComboBox->setCurrentIndex(j);
	
	this->_ctr=ctr;
	
	weightLineEdit->setText(CustomFETString::number(ctr->weightPercentage));
	
	for(QStringList::Iterator it=ctr->roomsNames.begin(); it!=ctr->roomsNames.end(); it++)
		selectedRoomsListWidget->addItem(*it);
}

开发者ID:RaminNietzsche，项目名称:POSFET，代码行数:45，代码来源:modifyconstraintactivitypreferredroomsform.cpp

注：本文中的restoreFETDialogGeometry函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ restoreGeometry函数代码示例发布时间：2022-05-30

C++ restore函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19177|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9987|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8622|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ restoreFETDialogGeometry函数代码示例

示例1: QDialog

示例2: QDialog

示例3: QDialog

示例4: QDialog

示例5: QDialog

示例6: QDialog

示例7: QDialog

示例8: dialog

示例9: last

示例10: tr

示例11: QDialog

示例12: QDialog

示例13: QDialog

示例14: QDialog

示例15: QDialog

示例16: QDialog

示例17: QDialog

请发表评论

全部评论

上一篇：

下一篇：

matlab破解教程密钥

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053