• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ reset_control_assert函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中reset_control_assert函数的典型用法代码示例。如果您正苦于以下问题:C++ reset_control_assert函数的具体用法?C++ reset_control_assert怎么用?C++ reset_control_assert使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了reset_control_assert函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: stop_oxnas_usb_ehci

static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
{
	reset_control_assert(oxnas->rst_host);
	reset_control_assert(oxnas->rst_phya);
	reset_control_assert(oxnas->rst_phyb);

	if (oxnas->use_pllb) {
		clk_disable_unprepare(oxnas->phyref);
		clk_disable_unprepare(oxnas->refsrc);
	}
	clk_disable_unprepare(oxnas->clk);
}
开发者ID:m0,项目名称:linux-oxnas,代码行数:12,代码来源:ehci-oxnas.c


示例2: histb_pcie_host_disable

static void histb_pcie_host_disable(struct histb_pcie *hipcie)
{
	reset_control_assert(hipcie->soft_reset);
	reset_control_assert(hipcie->sys_reset);
	reset_control_assert(hipcie->bus_reset);

	clk_disable_unprepare(hipcie->aux_clk);
	clk_disable_unprepare(hipcie->pipe_clk);
	clk_disable_unprepare(hipcie->sys_clk);
	clk_disable_unprepare(hipcie->bus_clk);

	if (gpio_is_valid(hipcie->reset_gpio))
		gpio_set_value_cansleep(hipcie->reset_gpio, 0);
}
开发者ID:SantoshShilimkar,项目名称:linux,代码行数:14,代码来源:pcie-histb.c


示例3: tegra_ahci_power_off

static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
{
	struct tegra_ahci_priv *tegra = hpriv->plat_data;

	ahci_platform_disable_resources(hpriv);

	reset_control_assert(tegra->sata_rst);
	reset_control_assert(tegra->sata_oob_rst);
	reset_control_assert(tegra->sata_cold_rst);

	clk_disable_unprepare(tegra->sata_clk);
	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);

	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
}
开发者ID:AlisaHan,项目名称:linux,代码行数:15,代码来源:ahci_tegra.c


示例4: ehci_platform_remove

static int ehci_platform_remove(struct platform_device *dev)
{
	struct usb_hcd *hcd = platform_get_drvdata(dev);
	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
	int clk;

	usb_remove_hcd(hcd);

	if (pdata->power_off)
		pdata->power_off(dev);

	if (priv->rst)
		reset_control_assert(priv->rst);

	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
		clk_put(priv->clks[clk]);

	usb_put_hcd(hcd);

	if (pdata == &ehci_platform_defaults)
		dev->dev.platform_data = NULL;

	return 0;
}
开发者ID:DenisLug,项目名称:mptcp,代码行数:25,代码来源:ehci-platform.c


示例5: tegra_powergate_sequence_power_up

/* Must be called with clk disabled, and returns with clk enabled */
int tegra_powergate_sequence_power_up(int id, struct clk *clk,
					struct reset_control *rst)
{
	int ret;

	reset_control_assert(rst);

	ret = tegra_powergate_power_on(id);
	if (ret)
		goto err_power;

	ret = clk_prepare_enable(clk);
	if (ret)
		goto err_clk;

	udelay(10);

	ret = tegra_powergate_remove_clamping(id);
	if (ret)
		goto err_clamp;

	udelay(10);
	reset_control_deassert(rst);

	return 0;

err_clamp:
	clk_disable_unprepare(clk);
err_clk:
	tegra_powergate_power_off(id);
err_power:
	return ret;
}
开发者ID:01org,项目名称:KVMGT-kernel,代码行数:34,代码来源:powergate.c


示例6: dwc3_core_init_for_resume

static int dwc3_core_init_for_resume(struct dwc3 *dwc)
{
	int ret;

	ret = reset_control_deassert(dwc->reset);
	if (ret)
		return ret;

	ret = clk_bulk_prepare(dwc->num_clks, dwc->clks);
	if (ret)
		goto assert_reset;

	ret = clk_bulk_enable(dwc->num_clks, dwc->clks);
	if (ret)
		goto unprepare_clks;

	ret = dwc3_core_init(dwc);
	if (ret)
		goto disable_clks;

	return 0;

disable_clks:
	clk_bulk_disable(dwc->num_clks, dwc->clks);
unprepare_clks:
	clk_bulk_unprepare(dwc->num_clks, dwc->clks);
assert_reset:
	reset_control_assert(dwc->reset);

	return ret;
}
开发者ID:Xilinx,项目名称:linux-xlnx,代码行数:31,代码来源:core.c


示例7: _alt_hps2fpga_enable_set

static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
				    bool enable)
{
	unsigned long flags;
	int ret;

	/* bring bridge out of reset */
	if (enable)
		ret = reset_control_deassert(priv->bridge_reset);
	else
		ret = reset_control_assert(priv->bridge_reset);
	if (ret)
		return ret;

	/* Allow bridge to be visible to L3 masters or not */
	if (priv->remap_mask) {
		spin_lock_irqsave(&l3_remap_lock, flags);
		l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;

		if (enable)
			l3_remap_shadow |= priv->remap_mask;
		else
			l3_remap_shadow &= ~priv->remap_mask;

		ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
				   l3_remap_shadow);
		spin_unlock_irqrestore(&l3_remap_lock, flags);
	}

	return ret;
}
开发者ID:AshishNamdev,项目名称:linux,代码行数:31,代码来源:altera-hps2fpga.c


示例8: dwc3_of_simple_remove

static int dwc3_of_simple_remove(struct platform_device *pdev)
{
	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
	struct device		*dev = &pdev->dev;
	int			i;

	of_platform_depopulate(dev);

	for (i = 0; i < simple->num_clocks; i++) {
		clk_disable_unprepare(simple->clks[i]);
		clk_put(simple->clks[i]);
	}
	simple->num_clocks = 0;

	if (!simple->pulse_resets)
		reset_control_assert(simple->resets);

	reset_control_put(simple->resets);

	pm_runtime_disable(dev);
	pm_runtime_put_noidle(dev);
	pm_runtime_set_suspended(dev);

	return 0;
}
开发者ID:guribe94,项目名称:linux,代码行数:25,代码来源:dwc3-of-simple.c


示例9: img_i2s_out_reset

static void img_i2s_out_reset(struct img_i2s_out *i2s)
{
	int i;
	u32 core_ctl, chan_ctl;

	core_ctl = img_i2s_out_readl(i2s, IMG_I2S_OUT_CTL) &
			~IMG_I2S_OUT_CTL_ME_MASK &
			~IMG_I2S_OUT_CTL_DATA_EN_MASK;

	if (!i2s->force_clk_active)
		core_ctl &= ~IMG_I2S_OUT_CTL_CLK_EN_MASK;

	chan_ctl = img_i2s_out_ch_readl(i2s, 0, IMG_I2S_OUT_CH_CTL) &
			~IMG_I2S_OUT_CHAN_CTL_ME_MASK;

	reset_control_assert(i2s->rst);
	reset_control_deassert(i2s->rst);

	for (i = 0; i < i2s->max_i2s_chan; i++)
		img_i2s_out_ch_writel(i2s, i, chan_ctl, IMG_I2S_OUT_CH_CTL);

	for (i = 0; i < i2s->active_channels; i++)
		img_i2s_out_ch_enable(i2s, i);

	img_i2s_out_writel(i2s, core_ctl, IMG_I2S_OUT_CTL);
	img_i2s_out_enable(i2s);
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:27,代码来源:img-i2s-out.c


示例10: i2c_dw_prepare_recovery

static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
{
	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);

	i2c_dw_disable(dev);
	reset_control_assert(dev->rst);
	i2c_dw_prepare_clk(dev, false);
}
开发者ID:avagin,项目名称:linux,代码行数:8,代码来源:i2c-designware-master.c


示例11: rockchip_dp_pre_init

static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
{
	reset_control_assert(dp->rst);
	usleep_range(10, 20);
	reset_control_deassert(dp->rst);

	return 0;
}
开发者ID:513855417,项目名称:linux,代码行数:8,代码来源:analogix_dp-rockchip.c


示例12: socfpga_dwmac_set_phy_mode

static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
{
	struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
	int phymode = dwmac->interface;
	u32 reg_offset = dwmac->reg_offset;
	u32 reg_shift = dwmac->reg_shift;
	u32 ctrl, val, module;

	switch (phymode) {
	case PHY_INTERFACE_MODE_RGMII:
	case PHY_INTERFACE_MODE_RGMII_ID:
		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
		break;
	case PHY_INTERFACE_MODE_MII:
	case PHY_INTERFACE_MODE_GMII:
		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
		break;
	default:
		dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
		return -EINVAL;
	}

	/* Overwrite val to GMII if splitter core is enabled. The phymode here
	 * is the actual phy mode on phy hardware, but phy interface from
	 * EMAC core is GMII.
	 */
	if (dwmac->splitter_base)
		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;

	/* Assert reset to the enet controller before changing the phy mode */
	if (dwmac->stmmac_rst)
		reset_control_assert(dwmac->stmmac_rst);

	regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
	ctrl |= val << reg_shift;

	if (dwmac->f2h_ptp_ref_clk) {
		ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
		regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
			    &module);
		module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
		regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
			     module);
	} else {
		ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
	}

	regmap_write(sys_mgr_base_addr, reg_offset, ctrl);

	/* Deassert reset for the phy configuration to be sampled by
	 * the enet controller, and operation to start in requested mode
	 */
	if (dwmac->stmmac_rst)
		reset_control_deassert(dwmac->stmmac_rst);

	return 0;
}
开发者ID:513855417,项目名称:linux,代码行数:58,代码来源:dwmac-socfpga.c


示例13: sun6i_drc_unbind

static void sun6i_drc_unbind(struct device *dev, struct device *master,
			    void *data)
{
	struct sun6i_drc *drc = dev_get_drvdata(dev);

	clk_disable_unprepare(drc->mod_clk);
	clk_disable_unprepare(drc->bus_clk);
	reset_control_assert(drc->reset);
}
开发者ID:krzk,项目名称:linux,代码行数:9,代码来源:sun6i_drc.c


示例14: dwc2_driver_remove

/**
 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
 * DWC_otg driver
 *
 * @dev: Platform device
 *
 * This routine is called, for example, when the rmmod command is executed. The
 * device may or may not be electrically present. If it is present, the driver
 * stops device processing. Any resources used on behalf of this device are
 * freed.
 */
static int dwc2_driver_remove(struct platform_device *dev)
{
	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);

	dwc2_debugfs_exit(hsotg);
	if (hsotg->hcd_enabled)
		dwc2_hcd_remove(hsotg);
	if (hsotg->gadget_enabled)
		dwc2_hsotg_remove(hsotg);

	if (hsotg->ll_hw_enabled)
		dwc2_lowlevel_hw_disable(hsotg);

	reset_control_assert(hsotg->reset);
	reset_control_assert(hsotg->reset_ecc);

	return 0;
}
开发者ID:guribe94,项目名称:linux,代码行数:29,代码来源:platform.c


示例15: xhci_histb_host_disable

static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
{
	reset_control_assert(histb->soft_reset);

	clk_disable_unprepare(histb->suspend_clk);
	clk_disable_unprepare(histb->pipe_clk);
	clk_disable_unprepare(histb->utmi_clk);
	clk_disable_unprepare(histb->bus_clk);
}
开发者ID:Lyude,项目名称:linux,代码行数:9,代码来源:xhci-histb.c


示例16: dwc3_of_simple_suspend

static int dwc3_of_simple_suspend(struct device *dev)
{
	struct dwc3_of_simple *simple = dev_get_drvdata(dev);

	if (simple->need_reset)
		reset_control_assert(simple->resets);

	return 0;
}
开发者ID:guribe94,项目名称:linux,代码行数:9,代码来源:dwc3-of-simple.c


示例17: p2wi_remove

static int p2wi_remove(struct platform_device *dev)
{
	struct p2wi *p2wi = platform_get_drvdata(dev);

	reset_control_assert(p2wi->rstc);
	clk_disable_unprepare(p2wi->clk);
	i2c_del_adapter(&p2wi->adapter);

	return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:10,代码来源:i2c-sun6i-p2wi.c


示例18: socfpga_dwmac_exit

static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
{
	struct socfpga_dwmac	*dwmac = priv;

	/* On socfpga platform exit, assert and hold reset to the
	 * enet controller - the default state after a hard reset.
	 */
	if (dwmac->stmmac_rst)
		reset_control_assert(dwmac->stmmac_rst);
}
开发者ID:AkyZero,项目名称:wrapfs-latest,代码行数:10,代码来源:dwmac-socfpga.c


示例19: dw_wdt_drv_remove

static int dw_wdt_drv_remove(struct platform_device *pdev)
{
	struct dw_wdt *dw_wdt = platform_get_drvdata(pdev);

	watchdog_unregister_device(&dw_wdt->wdd);
	reset_control_assert(dw_wdt->rst);
	clk_disable_unprepare(dw_wdt->clk);

	return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:10,代码来源:dw_wdt.c


示例20: uniphier_pciephy_exit

static int uniphier_pciephy_exit(struct phy *phy)
{
	struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);

	uniphier_pciephy_assert(priv);
	reset_control_assert(priv->rst);
	clk_disable_unprepare(priv->clk);

	return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:10,代码来源:phy-uniphier-pcie.c



注:本文中的reset_control_assert函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ reset_control_deassert函数代码示例发布时间:2022-05-30
下一篇:
C++ reset_buf函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap