C++ register_netdevice函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中register_netdevice函数的典型用法代码示例。如果您正苦于以下问题：C++ register_netdevice函数的具体用法？C++ register_netdevice怎么用？C++ register_netdevice使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了register_netdevice函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: lowpan_register_netdevice

int lowpan_register_netdevice(struct net_device *dev,
			      enum lowpan_lltypes lltype)
{
	int i, ret;

	dev->addr_len = EUI64_ADDR_LEN;
	dev->type = ARPHRD_6LOWPAN;
	dev->mtu = IPV6_MIN_MTU;
	dev->priv_flags |= IFF_NO_QUEUE;

	lowpan_dev(dev)->lltype = lltype;

	spin_lock_init(&lowpan_dev(dev)->ctx.lock);
	for (i = 0; i < LOWPAN_IPHC_CTX_TABLE_SIZE; i++)
		lowpan_dev(dev)->ctx.table[i].id = i;

	dev->ndisc_ops = &lowpan_ndisc_ops;

	ret = register_netdevice(dev);
	if (ret < 0)
		return ret;

	ret = lowpan_dev_debugfs_init(dev);
	if (ret < 0)
		unregister_netdevice(dev);

	return ret;
}

开发者ID:AK101111，项目名称:linux，代码行数:28，代码来源:core.c

示例2: ip_tunnel_newlink

int ip_tunnel_newlink(struct net_device *dev, struct nlattr *tb[],
		      struct ip_tunnel_parm *p)
{
	struct ip_tunnel *nt;
	struct net *net = dev_net(dev);
	struct ip_tunnel_net *itn;
	int mtu;
	int err;

	nt = netdev_priv(dev);
	itn = net_generic(net, nt->ip_tnl_net_id);

	if (ip_tunnel_find(itn, p, dev->type))
		return -EEXIST;

	nt->net = net;
	nt->parms = *p;
	err = register_netdevice(dev);
	if (err)
		goto out;

	if (dev->type == ARPHRD_ETHER && !tb[IFLA_ADDRESS])
		eth_hw_addr_random(dev);

	mtu = ip_tunnel_bind_dev(dev);
	if (!tb[IFLA_MTU])
		dev->mtu = mtu;

	ip_tunnel_add(itn, nt);

out:
	return err;
}

开发者ID:gbtian，项目名称:mpip，代码行数:33，代码来源:ip_tunnel.c

示例3: alloc_netdev

static struct net_device *ip6mr_reg_vif(struct net *net)
{
	struct net_device *dev;

	dev = alloc_netdev(0, "pim6reg", reg_vif_setup);
	if (dev == NULL)
		return NULL;

	dev_net_set(dev, net);

	if (register_netdevice(dev)) {
		free_netdev(dev);
		return NULL;
	}
	dev->iflink = 0;

	if (dev_open(dev))
		goto failure;

	dev_hold(dev);
	return dev;

failure:
	/* allow the register to be completed before unregistering. */
	rtnl_unlock();
	rtnl_lock();

	unregister_netdevice(dev);
	return NULL;
}

开发者ID:vps2fast，项目名称:openvz-kernel，代码行数:30，代码来源:ip6mr.c

示例4: rmnet_vnd_create_dev

int rmnet_vnd_create_dev(int id, struct net_device **new_device)
{
	struct net_device *dev;
	int rc = 0;

	if (id < 0 || id > RMNET_DATA_MAX_VND || rmnet_devices[id] != 0) {
		*new_device = 0;
		return -EINVAL;
	}

	dev = alloc_netdev(sizeof(struct rmnet_vnd_private_s),
			   RMNET_DATA_DEV_NAME_STR,
			   rmnet_vnd_setup);
	if (!dev) {
		LOGE("%s(): Failed to to allocate netdev for id %d",
		      __func__, id);
		*new_device = 0;
		return -EINVAL;
	}

	rc = register_netdevice(dev);
	if (rc != 0) {
		LOGE("%s(): Failed to to register netdev [%s]",
		      __func__, dev->name);
		free_netdev(dev);
		*new_device = 0;
	} else {
		rmnet_devices[id] = dev;
		*new_device = dev;
	}

	LOGM("%s(): Registered device %s\n", __func__, dev->name);
	return rc;
}

开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:34，代码来源:rmnet_data_vnd.c

示例5: au1k_irda_init

static int au1k_irda_init(void)
{
	static unsigned version_printed = 0;
	struct net_device *dev;
	int err;

	if (version_printed++ == 0) printk(version);

	rtnl_lock();
	dev = dev_alloc("irda%d", &err);
	if (dev) {
		dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */
		dev->init = au1k_irda_net_init;
		dev->uninit = au1k_irda_net_uninit;
		err = register_netdevice(dev);

		if (err)
			kfree(dev);
		else
			ir_devs[0] = dev;
		printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
	}
	rtnl_unlock();
	return err;
}

开发者ID:NieHao，项目名称:Tomato-RAF，代码行数:25，代码来源:au1k_ir.c

示例6: alloc_netdev

static struct net_device *ipmr_reg_vif(void)
{
    struct net_device *dev;
    struct in_device *in_dev;

    dev = alloc_netdev(sizeof(struct net_device_stats), "pimreg",
                       reg_vif_setup);

    if (dev == NULL)
        return NULL;

    if (register_netdevice(dev)) {
        free_netdev(dev);
        return NULL;
    }
    dev->iflink = 0;

    if ((in_dev = inetdev_init(dev)) == NULL)
        goto failure;

    in_dev->cnf.rp_filter = 0;

    if (dev_open(dev))
        goto failure;

    return dev;

failure:
    unregister_netdevice(dev);
    return NULL;
}

开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:31，代码来源:ipmr.c

示例7: ipip6_tunnel_locate

static struct ip_tunnel * ipip6_tunnel_locate(struct net *net,
		struct ip_tunnel_parm *parms, int create)
{
	__be32 remote = parms->iph.daddr;
	__be32 local = parms->iph.saddr;
	struct ip_tunnel *t, **tp, *nt;
	struct net_device *dev;
	char name[IFNAMSIZ];
	struct sit_net *sitn = net_generic(net, sit_net_id);

	for (tp = __ipip6_bucket(sitn, parms); (t = *tp) != NULL; tp = &t->next) {
		if (local == t->parms.iph.saddr &&
		    remote == t->parms.iph.daddr &&
		    parms->link == t->parms.link) {
			if (create)
				return NULL;
			else
				return t;
		}
	}
	if (!create)
		goto failed;

	if (parms->name[0])
		strlcpy(name, parms->name, IFNAMSIZ);
	else
		sprintf(name, "sit%%d");

	dev = alloc_netdev(sizeof(*t), name, ipip6_tunnel_setup);
	if (dev == NULL)
		return NULL;

	dev_net_set(dev, net);

	if (strchr(name, '%')) {
		if (dev_alloc_name(dev, name) < 0)
			goto failed_free;
	}

	nt = netdev_priv(dev);

	nt->parms = *parms;
	ipip6_tunnel_init(dev);

	if (parms->i_flags & SIT_ISATAP)
		dev->priv_flags |= IFF_ISATAP;

	if (register_netdevice(dev) < 0)
		goto failed_free;

	dev_hold(dev);

	ipip6_tunnel_link(sitn, nt);
	return nt;

failed_free:
	free_netdev(dev);
failed:
	return NULL;
}

开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:60，代码来源:sit.c

示例8: ifb_init_one

static int __init ifb_init_one(int index)
{
	struct net_device *dev_ifb;
	struct ifb_private *dp;
	int err;

	dev_ifb = alloc_netdev(sizeof(struct ifb_private),
				 "ifb%d", ifb_setup);

	if (!dev_ifb)
		return -ENOMEM;

	dp = netdev_priv(dev_ifb);
	u64_stats_init(&dp->rsync);
	u64_stats_init(&dp->tsync);

	dev_ifb->rtnl_link_ops = &ifb_link_ops;
	err = register_netdevice(dev_ifb);
	if (err < 0)
		goto err;

	return 0;

err:
	free_netdev(dev_ifb);
	return err;
}

开发者ID:AnadoluPanteri，项目名称:kernel-plus-harmattan，代码行数:27，代码来源:ifb.c

示例9: ifb_init_one

static int __init ifb_init_one(int index)
{
	struct net_device *dev_ifb;
	int err;

	dev_ifb = alloc_netdev(sizeof(struct ifb_private),
				 "ifb%d", ifb_setup);

	if (!dev_ifb)
		return -ENOMEM;

	err = dev_alloc_name(dev_ifb, dev_ifb->name);
	if (err < 0)
		goto err;

	dev_ifb->rtnl_link_ops = &ifb_link_ops;
	err = register_netdevice(dev_ifb);
	if (err < 0)
		goto err;

	return 0;

err:
	free_netdev(dev_ifb);
	return err;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:26，代码来源:ifb.c

示例10: net_profile_init

int __init net_profile_init(void)
{
	int i;

#ifdef CONFIG_PROC_FS
	create_proc_read_entry("net/profile", 0, 0, profile_read_proc, NULL);
#endif

	register_netdevice(&whitehole_dev);

	printk("Evaluating net profiler cost ...");
#ifdef __alpha__
	alpha_tick(0);
#endif
	for (i=0; i<1024; i++) {
		NET_PROFILE_ENTER(total);
		NET_PROFILE_LEAVE(total);
	}
	if (net_prof_total.accumulator.tv_sec) {
		printk(" too high!\n");
	} else {
		net_profile_adjust.tv_usec = net_prof_total.accumulator.tv_usec>>10;
		printk("%ld units\n", net_profile_adjust.tv_usec);
	}
	net_prof_total.hits = 0;
	net_profile_stamp(&net_prof_total.entered);
	return 0;
}

开发者ID:JBTech，项目名称:ralink_rt5350，代码行数:28，代码来源:profile.c

示例11: alloc_netdev

static struct net_device *ipmr_reg_vif(void)
{
	struct net_device *dev;
	struct in_device *in_dev;

	dev = alloc_netdev(sizeof(struct net_device_stats), "pimreg",
			   reg_vif_setup);

	if (dev == NULL)
		return NULL;

	if (register_netdevice(dev)) {
		free_netdev(dev);
		return NULL;
	}
	dev->iflink = 0;

	if ((in_dev = inetdev_init(dev)) == NULL)
		goto failure;

	in_dev->cnf.rp_filter = 0;

	if (dev_open(dev))
		goto failure;

	return dev;

failure:
	/* allow the register to be completed before unregistering. */
	rtnl_unlock();
	rtnl_lock();

	unregister_netdevice(dev);
	return NULL;
}

开发者ID:jameshilliard，项目名称:actiontec_opensrc_mi424wr-rev-e-f_fw-20-10-7-5，代码行数:35，代码来源:ipmr.c

示例12: vrf_newlink

static int vrf_newlink(struct net *src_net, struct net_device *dev,
		       struct nlattr *tb[], struct nlattr *data[])
{
	struct net_vrf *vrf = netdev_priv(dev);
	int err;

	if (!data || !data[IFLA_VRF_TABLE])
		return -EINVAL;

	vrf->tb_id = nla_get_u32(data[IFLA_VRF_TABLE]);
	if (vrf->tb_id == RT_TABLE_UNSPEC)
		return -EINVAL;

	dev->priv_flags |= IFF_L3MDEV_MASTER;

	err = register_netdevice(dev);
	if (err)
		goto out;

	if (add_fib_rules) {
		err = vrf_add_fib_rules(dev);
		if (err) {
			unregister_netdevice(dev);
			goto out;
		}
		add_fib_rules = false;
	}

out:
	return err;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:31，代码来源:vrf.c

示例13: rmnet_vnd_newlink

int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
		      struct rmnet_port *port,
		      struct net_device *real_dev)
{
	struct rmnet_priv *priv;
	int rc;

	if (port->rmnet_devices[id])
		return -EINVAL;

	rc = register_netdevice(rmnet_dev);
	if (!rc) {
		port->rmnet_devices[id] = rmnet_dev;
		port->nr_rmnet_devs++;

		rmnet_dev->rtnl_link_ops = &rmnet_link_ops;

		priv = netdev_priv(rmnet_dev);
		priv->mux_id = id;
		priv->real_dev = real_dev;

		netdev_dbg(rmnet_dev, "rmnet dev created\n");
	}

	return rc;
}

开发者ID:mkrufky，项目名称:linux，代码行数:26，代码来源:rmnet_vnd.c

示例14: ipip_tunnel_locate

struct ip_tunnel * ipip_tunnel_locate(struct ip_tunnel_parm *parms, int create)
{
	u32 remote = parms->iph.daddr;
	u32 local = parms->iph.saddr;
	struct ip_tunnel *t, **tp, *nt;
	struct device *dev;
	unsigned h = 0;
	int prio = 0;

	if (remote) {
		prio |= 2;
		h ^= HASH(remote);
	}
	if (local) {
		prio |= 1;
		h ^= HASH(local);
	}
	for (tp = &tunnels[prio][h]; (t = *tp) != NULL; tp = &t->next) {
		if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr)
			return t;
	}
	if (!create)
		return NULL;

	MOD_INC_USE_COUNT;
	dev = kmalloc(sizeof(*dev) + sizeof(*t), GFP_KERNEL);
	if (dev == NULL) {
		MOD_DEC_USE_COUNT;
		return NULL;
	}
	memset(dev, 0, sizeof(*dev) + sizeof(*t));
	dev->priv = (void*)(dev+1);
	nt = (struct ip_tunnel*)dev->priv;
	nt->dev = dev;
	dev->name = nt->parms.name;
	dev->init = ipip_tunnel_init;
	memcpy(&nt->parms, parms, sizeof(*parms));
	if (dev->name[0] == 0) {
		int i;
		for (i=1; i<100; i++) {
			sprintf(dev->name, "tunl%d", i);
			if (dev_get(dev->name) == NULL)
				break;
		}
		if (i==100)
			goto failed;
		memcpy(parms->name, dev->name, IFNAMSIZ);
	}
	if (register_netdevice(dev) < 0)
		goto failed;

	ipip_tunnel_link(nt);
	/* Do not decrement MOD_USE_COUNT here. */
	return nt;

failed:
	kfree(dev);
	MOD_DEC_USE_COUNT;
	return NULL;
}

开发者ID:GNUHurdTR，项目名称:hurd，代码行数:60，代码来源:ipip.c

示例15: alloc_etherdev

/**
 *  @brief      WILC_WFI_init_mon_interface
 *  @details
 *  @param[in]
 *  @return     int : Return 0 on Success
 *  @author	mdaftedar
 *  @date	12 JUL 2012
 *  @version	1.0
 */
struct net_device *WILC_WFI_init_mon_interface(const char *name,
					       struct net_device *real_dev)
{
	u32 ret = 0;
	struct WILC_WFI_mon_priv *priv;

	/*If monitor interface is already initialized, return it*/
	if (wilc_wfi_mon)
		return wilc_wfi_mon;

	wilc_wfi_mon = alloc_etherdev(sizeof(struct WILC_WFI_mon_priv));
	if (!wilc_wfi_mon)
		return NULL;
	wilc_wfi_mon->type = ARPHRD_IEEE80211_RADIOTAP;
	strncpy(wilc_wfi_mon->name, name, IFNAMSIZ);
	wilc_wfi_mon->name[IFNAMSIZ - 1] = 0;
	wilc_wfi_mon->netdev_ops = &wilc_wfi_netdev_ops;

	ret = register_netdevice(wilc_wfi_mon);
	if (ret) {
		netdev_err(real_dev, "register_netdevice failed\n");
		return NULL;
	}
	priv = netdev_priv(wilc_wfi_mon);
	if (!priv)
		return NULL;

	priv->real_ndev = real_dev;

	return wilc_wfi_mon;
}

开发者ID:513855417，项目名称:linux，代码行数:40，代码来源:linux_mon.c

示例16: register_vlan_dev

int register_vlan_dev(struct net_device *dev)
{
	struct vlan_dev_info *vlan = vlan_dev_info(dev);
	struct net_device *real_dev = vlan->real_dev;
	const struct net_device_ops *ops = real_dev->netdev_ops;
	u16 vlan_id = vlan->vlan_id;
	struct vlan_group *grp, *ngrp = NULL;
	int err;

	grp = rtnl_dereference(real_dev->vlgrp);
	if (!grp) {
		ngrp = grp = vlan_group_alloc(real_dev);
		if (!grp)
			return -ENOBUFS;
		err = vlan_gvrp_init_applicant(real_dev);
		if (err < 0)
			goto out_free_group;
	}

	err = vlan_group_prealloc_vid(grp, vlan_id);
	if (err < 0)
		goto out_uninit_applicant;

	err = register_netdevice(dev);
	if (err < 0)
		goto out_uninit_applicant;

	/* Account for reference in struct vlan_dev_info */
	dev_hold(real_dev);

	netif_stacked_transfer_operstate(real_dev, dev);
	linkwatch_fire_event(dev); /* _MUST_ call rfc2863_policy() */

	/* So, got the sucker initialized, now lets place
	 * it into our local structure.
	 */
	vlan_group_set_device(grp, vlan_id, dev);
	grp->nr_vlans++;

	if (ngrp) {
		if (ops->ndo_vlan_rx_register)
			ops->ndo_vlan_rx_register(real_dev, ngrp);
		rcu_assign_pointer(real_dev->vlgrp, ngrp);
	}
	if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
		ops->ndo_vlan_rx_add_vid(real_dev, vlan_id);

	return 0;

out_uninit_applicant:
	if (ngrp)
		vlan_gvrp_uninit_applicant(real_dev);
out_free_group:
	if (ngrp) {
		/* Free the group, after all cpu's are done. */
		call_rcu(&ngrp->rcu, vlan_rcu_free);
	}
	return err;
}

开发者ID:Adjustxx，项目名称:Savaged-Zen，代码行数:59，代码来源:vlan.c

示例17: rtw_change_ifname

/*
* Jeff: this function should be called under ioctl (rtnl_lock is accquired) while
* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
*/
int rtw_change_ifname(_adapter *padapter, const char *ifname)
{
	struct net_device *pnetdev;
	struct net_device *cur_pnetdev;
	struct rereg_nd_name_data *rereg_priv;
	int ret;

	if(!padapter)
		goto error;

	cur_pnetdev = padapter->pnetdev;
	rereg_priv = &padapter->rereg_nd_name_priv;

	//free the old_pnetdev
	if(rereg_priv->old_pnetdev) {
		free_netdev(rereg_priv->old_pnetdev);
		rereg_priv->old_pnetdev = NULL;
	}

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26))
	if(!rtnl_is_locked())
		unregister_netdev(cur_pnetdev);
	else
#endif
		unregister_netdevice(cur_pnetdev);

	rereg_priv->old_pnetdev=cur_pnetdev;

	pnetdev = rtw_init_netdev(padapter);
	if (!pnetdev)  {
		ret = -1;
		goto error;
	}

	SET_NETDEV_DEV(pnetdev, dvobj_to_dev(adapter_to_dvobj(padapter)));

	rtw_init_netdev_name(pnetdev, ifname);

	_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);

#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26))
	if(!rtnl_is_locked())
		ret = register_netdev(pnetdev);
	else
#endif
		ret = register_netdevice(pnetdev);

	if ( ret != 0) {
		RT_TRACE(_module_hci_intfs_c_,_drv_err_,("register_netdev() failed\n"));
		goto error;
	}

	return 0;

error:

	return -1;

}

开发者ID:OpenLD，项目名称:linux-wetek-3.10.y，代码行数:63，代码来源:osdep_service.c

示例18: zfLnxRegisterVapDev

int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
{
    /* Allocate net device structure */
    vap[vapId].dev = alloc_etherdev(0);
    printk("Register vap dev=%x\n", (u32_t)vap[vapId].dev);

    if(vap[vapId].dev == NULL) {
        printk("alloc_etherdev fail\n");
        return -ENOMEM;
    }

    /* Setup the default settings */
    ether_setup(vap[vapId].dev);

    /* MAC address */
    memcpy(vap[vapId].dev->dev_addr, parentDev->dev_addr, ETH_ALEN);

    vap[vapId].dev->irq = parentDev->irq;
    vap[vapId].dev->base_addr = parentDev->base_addr;
    vap[vapId].dev->mem_start = parentDev->mem_start;
    vap[vapId].dev->mem_end = parentDev->mem_end;
    vap[vapId].dev->ml_priv = parentDev->ml_priv;

    //dev->hard_start_xmit = &zd1212_wds_xmit_frame;
    vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
    vap[vapId].dev->open = &zfLnxVapOpen;
    vap[vapId].dev->stop = &zfLnxVapClose;
    vap[vapId].dev->get_stats = &usbdrv_get_stats;
    vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
#ifdef ZM_HOSTAPD_SUPPORT
    vap[vapId].dev->do_ioctl = usbdrv_ioctl;
#else
    vap[vapId].dev->do_ioctl = NULL;
#endif
    vap[vapId].dev->destructor = free_netdev;

    vap[vapId].dev->tx_queue_len = 0;

    vap[vapId].dev->dev_addr[0] = parentDev->dev_addr[0];
    vap[vapId].dev->dev_addr[1] = parentDev->dev_addr[1];
    vap[vapId].dev->dev_addr[2] = parentDev->dev_addr[2];
    vap[vapId].dev->dev_addr[3] = parentDev->dev_addr[3];
    vap[vapId].dev->dev_addr[4] = parentDev->dev_addr[4];
    vap[vapId].dev->dev_addr[5] = parentDev->dev_addr[5] + (vapId+1);

    /* Stop the network queue first */
    netif_stop_queue(vap[vapId].dev);

    sprintf(vap[vapId].dev->name, "vap%d", vapId);
    printk("Register VAP dev success : %s\n", vap[vapId].dev->name);

    if(register_netdevice(vap[vapId].dev) != 0) {
        printk("register VAP device fail\n");
        vap[vapId].dev = NULL;
        return -EINVAL;
    }

    return 0;
}

开发者ID:mecke，项目名称:linux-2.6，代码行数:59，代码来源:usbdrv.c

示例19: ovs_vport_alloc

static struct vport *internal_dev_create(const struct vport_parms *parms)
{
	struct vport *vport;
	struct internal_dev *internal_dev;
	int err;

	vport = ovs_vport_alloc(0, &ovs_internal_vport_ops, parms);
	if (IS_ERR(vport)) {
		err = PTR_ERR(vport);
		goto error;
	}

	vport->dev = alloc_netdev(sizeof(struct internal_dev),
				  parms->name, NET_NAME_USER, do_setup);
	if (!vport->dev) {
		err = -ENOMEM;
		goto error_free_vport;
	}
	vport->dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
	if (!vport->dev->tstats) {
		err = -ENOMEM;
		goto error_free_netdev;
	}

#ifdef HAVE_IFF_PHONY_HEADROOM
	vport->dev->needed_headroom = vport->dp->max_headroom;
#endif
	dev_net_set(vport->dev, ovs_dp_get_net(vport->dp));
	internal_dev = internal_dev_priv(vport->dev);
	internal_dev->vport = vport;

	/* Restrict bridge port to current netns. */
	if (vport->port_no == OVSP_LOCAL)
		vport->dev->features |= NETIF_F_NETNS_LOCAL;

	rtnl_lock();
	err = register_netdevice(vport->dev);
	if (err)
		goto error_unlock;

	dev_set_promiscuity(vport->dev, 1);
	rtnl_unlock();
	netif_start_queue(vport->dev);

	return vport;

error_unlock:
	rtnl_unlock();
	free_percpu(vport->dev->tstats);
error_free_netdev:
	free_netdev(vport->dev);
error_free_vport:
	ovs_vport_free(vport);
error:
	return ERR_PTR(err);
}

开发者ID:Grim-lock，项目名称:ovs，代码行数:56，代码来源:vport-internal_dev.c

示例20: setup_dummy_device

void
setup_dummy_device (char *name, struct device **device)
{
  error_t err;
  struct dummy_device *ddev;
  struct device *dev;

  ddev = calloc (1, sizeof (struct dummy_device));
  if (!ddev)
    error (2, ENOMEM, "%s", name);
  ddev->next = dummy_dev;
  dummy_dev = ddev;

  *device = dev = &ddev->dev;

  dev->name = strdup (name);

  dev->priv = ddev;
  dev->get_stats = dummy_get_stats;

  dev->open = dummy_open;
  dev->stop = dummy_stop;
  dev->hard_start_xmit = dummy_xmit;
  dev->set_multicast_list = dummy_set_multi;

  /* These are the ones set by drivers/net/net_init.c::ether_setup.  */
  dev->hard_header = eth_header;
  dev->rebuild_header = eth_rebuild_header;
  dev->hard_header_cache = eth_header_cache;
  dev->header_cache_update = eth_header_cache_update;
  dev->hard_header_parse = eth_header_parse;
  /* We can't do these two (and we never try anyway).  */
  /* dev->change_mtu = eth_change_mtu; */
  /* dev->set_mac_address = eth_mac_addr; */

  /* Some more fields */
  dev->type = ARPHRD_ETHER;
  dev->hard_header_len = ETH_HLEN;
  dev->addr_len = ETH_ALEN;
  memset (dev->broadcast, 0xff, ETH_ALEN);
  dev->flags = IFF_BROADCAST | IFF_MULTICAST;
  dev_init_buffers (dev);

  dev->mtu = 1500;
  dev->tx_queue_len = 0;
  dev->flags |= IFF_NOARP;
  dev->flags &= ~IFF_MULTICAST;

  /* That should be enough.  */

  /* This call adds the device to the `dev_base' chain,
     initializes its `ifindex' member (which matters!),
     and tells the protocol stacks about the device.  */
  err = - register_netdevice (dev);
  assert_perror (err);
}

开发者ID:GNUHurdTR，项目名称:hurd，代码行数:56，代码来源:dummy.c

注：本文中的register_netdevice函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ register_netdevice_notifier函数代码示例发布时间：2022-05-30

C++ register_netdev函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19183|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8622|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ register_netdevice函数代码示例

示例1: lowpan_register_netdevice

示例2: ip_tunnel_newlink

示例3: alloc_netdev

示例4: rmnet_vnd_create_dev

示例5: au1k_irda_init

示例6: alloc_netdev

示例7: ipip6_tunnel_locate

示例8: ifb_init_one

示例9: ifb_init_one

示例10: net_profile_init

示例11: alloc_netdev

示例12: vrf_newlink

示例13: rmnet_vnd_newlink

示例14: ipip_tunnel_locate

示例15: alloc_etherdev

示例16: register_vlan_dev

示例17: rtw_change_ifname

示例18: zfLnxRegisterVapDev

示例19: ovs_vport_alloc

示例20: setup_dummy_device

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-24140

sussillo/hfopt-matlab: A parallel, cpu-b

emersion/go-ostatus: An OStatus library

spicetify/spicetify-cli: Commandline too

把的笔顺,知晓把的笔画,分析把的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053