C++ register_class_devname函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中register_class_devname函数的典型用法代码示例。如果您正苦于以下问题：C++ register_class_devname函数的具体用法？C++ register_class_devname怎么用？C++ register_class_devname使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了register_class_devname函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: RingBuffer

int
HMC5883::init()
{
	int ret = ERROR;

	/* do I2C init (and probe) first */
	if (I2C::init() != OK)
		goto out;

	/* allocate basic report buffers */
	_reports = new RingBuffer(2, sizeof(mag_report));
	if (_reports == nullptr)
		goto out;

	/* reset the device configuration */
	reset();

	_class_instance = register_class_devname(MAG_DEVICE_PATH);
	if (_class_instance == CLASS_DEVICE_PRIMARY) {
		/* get a publish handle on the mag topic if we are
		 * the primary mag */
		struct mag_report zero_report;
		memset(&zero_report, 0, sizeof(zero_report));
		_mag_topic = orb_advertise(ORB_ID(sensor_mag), &zero_report);

		if (_mag_topic < 0)
			debug("failed to create sensor_mag object");
	}

	ret = OK;
	/* sensor is ok, but not calibrated */
	_sensor_ok = true;
out:
	return ret;
}

开发者ID:3yc，项目名称:PX4Firmware，代码行数:35，代码来源:hmc5883.cpp

示例2: CDev

PX4Magnetometer::PX4Magnetometer(const char *path, device::Device  *interface, uint8_t dev_type, enum Rotation rotation,
				 float scale) :
	CDev(path),
	_interface(interface)
{
	_device_id.devid = _interface->get_device_id();
	// _device_id.devid_s.bus_type = (device::Device::DeviceBusType)_interface->get_device_bus_type();
	// _device_id.devid_s.bus = _interface->get_device_bus();
	// _device_id.devid_s.address = _interface->get_device_address();
	_device_id.devid_s.devtype = dev_type;

	CDev::init();

	_class_device_instance = register_class_devname(MAG_BASE_DEVICE_PATH);

	_rotation = rotation;
	_scale = scale;

	_cal.x_offset = 0;
	_cal.x_scale  = 1.0f;
	_cal.y_offset = 0;
	_cal.y_scale  = 1.0f;
	_cal.z_offset = 0;
	_cal.z_scale  = 1.0f;
}

开发者ID:AlexisTM，项目名称:Firmware，代码行数:25，代码来源:PX4Magnetometer.cpp

示例3: DEVICE_DEBUG

int
LIS3MDL::init()
{
	int ret = PX4_ERROR;

	ret = CDev::init();

	if (ret != OK) {
		DEVICE_DEBUG("CDev init failed");
		return ret;
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(mag_report));

	if (_reports == nullptr) {
		return PX4_ERROR;
	}

	/* reset the device configuration */
	reset();

	_class_instance = register_class_devname(MAG_BASE_DEVICE_PATH);

	return PX4_OK;
}

开发者ID:LiYuanxing，项目名称:Firmware，代码行数:26，代码来源:lis3mdl.cpp

示例4: sizeof

int LidarLitePWM::init()
{
	/* do regular cdev init */
	int ret = CDev::init();

	if (ret != OK) {
		return ERROR;
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(struct distance_sensor_s));

	if (_reports == nullptr) {
		return ERROR;
	}

	_class_instance = register_class_devname(RANGE_FINDER_BASE_DEVICE_PATH);

	if (_class_instance == CLASS_DEVICE_PRIMARY) {
		/* get a publish handle on the distance_sensor topic */
		struct distance_sensor_s ds_report;
		measure();
		_reports->get(&ds_report);
		_distance_sensor_topic = orb_advertise_multi(ORB_ID(distance_sensor), &ds_report,
							     &_orb_class_instance, ORB_PRIO_LOW);

		if (_distance_sensor_topic == nullptr) {
			debug("failed to create distance_sensor object. Did you start uORB?");
		}
	}

	return OK;
}

开发者ID:martinjaime，项目名称:Firmware，代码行数:33，代码来源:LidarLitePWM.cpp

示例5: assert

int
PX4FMU::init()
{
	int ret;

	assert(!_initialized);

	/* do regular cdev init */
	ret = CDev::init();

	if (ret != OK) {
		return ret;
	}

	/* try to claim the generic PWM output device node as well - it's OK if we fail at this */
	_class_instance = register_class_devname(PWM_OUTPUT_BASE_DEVICE_PATH);

	if (_class_instance == CLASS_DEVICE_PRIMARY) {
		/* lets not be too verbose */
	} else if (_class_instance < 0) {
		warnx("FAILED registering class device\n");
	}

	work_start();

	return OK;
}

开发者ID:SovietUnion1997，项目名称:PhenixPro_Devkit，代码行数:27，代码来源:fmu.cpp

示例6: RingBuffer

int
L3G4200D::init()
{
	int ret = ERROR;

	/* do SPI init (and probe) first */
	if (SPI::init() != OK)
		goto out;

	/* allocate basic report buffers */
	_reports = new RingBuffer(2, sizeof(gyro_report));

	if (_reports == nullptr)
		goto out;

	_class_instance = register_class_devname(GYRO_DEVICE_PATH);
        if (_class_instance == CLASS_DEVICE_PRIMARY) {
		/* advertise sensor topic */
		struct gyro_report zero_report;
		memset(&zero_report, 0, sizeof(zero_report));
		_gyro_topic = orb_advertise(ORB_ID(sensor_gyro), &zero_report);
        }

	reset();

	ret = OK;
out:
	return ret;
}

开发者ID:smithandrewc，项目名称:Firmware，代码行数:29，代码来源:l3g4200d.cpp

示例7: sizeof

int LidarLiteI2C::init()
{
	int ret = PX4_ERROR;

	/* do I2C init (and probe) first */
	if (I2C::init() != OK) {
		return ret;
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(struct distance_sensor_s));

	if (_reports == nullptr) {
		return ret;
	}

	_class_instance = register_class_devname(RANGE_FINDER_BASE_DEVICE_PATH);

	/* get a publish handle on the range finder topic */
	struct distance_sensor_s ds_report = {};
	measure();
	_reports->get(&ds_report);
	_distance_sensor_topic = orb_advertise_multi(ORB_ID(distance_sensor), &ds_report,
				 &_orb_class_instance, ORB_PRIO_LOW);

	if (_distance_sensor_topic == nullptr) {
		DEVICE_DEBUG("failed to create distance_sensor object. Did you start uOrb?");
	}

	ret = OK;
	/* sensor is ok, but we don't really know if it is within range */
	_sensor_ok = true;

	return ret;
}

开发者ID:imcnanie，项目名称:Firmware，代码行数:35，代码来源:LidarLiteI2C.cpp

示例8: RingBuffer

int
HMC5883::init()
{
	int ret = ERROR;

	/* do I2C init (and probe) first */
	if (I2C::init() != OK)
		goto out;

	/* allocate basic report buffers */
	_reports = new RingBuffer(2, sizeof(mag_report));
	if (_reports == nullptr)
		goto out;

	/* reset the device configuration */
	reset();

	_class_instance = register_class_devname(MAG_DEVICE_PATH);

	ret = OK;
	/* sensor is ok, but not calibrated */
	_sensor_ok = true;
out:
	return ret;
}

开发者ID:30rasheed，项目名称:x-VTOLdrone，代码行数:25，代码来源:hmc5883.cpp

示例9: DEVICE_DEBUG

int
QMC5883::init()
{
	int ret = PX4_ERROR;

	ret = CDev::init();

	if (ret != OK) {
		DEVICE_DEBUG("CDev init failed");
		goto out;
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(mag_report));

	if (_reports == nullptr) {
		goto out;
	}

	/* reset the device configuration */
	reset();

	_class_instance = register_class_devname(MAG_BASE_DEVICE_PATH);

	ret = OK;
	/* sensor is ok */
	_sensor_ok = true;
out:
	return ret;
}

开发者ID:AlexisTM，项目名称:Firmware，代码行数:30，代码来源:qmc5883.cpp

示例10: DEVICE_DEBUG

int
LPS25H::init()
{
	int ret;

	ret = CDev::init();

	if (ret != OK) {
		DEVICE_DEBUG("CDev init failed");
		goto out;
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(sensor_baro_s));

	if (_reports == nullptr) {
		DEVICE_DEBUG("can't get memory for reports");
		ret = -ENOMEM;
		goto out;
	}

	if (reset() != OK) {
		goto out;
	}

	/* register alternate interfaces if we have to */
	_class_instance = register_class_devname(BARO_BASE_DEVICE_PATH);

	ret = OK;

out:
	return ret;
}

开发者ID:andre-nguyen，项目名称:Firmware，代码行数:33，代码来源:lps25h.cpp

示例11: DEVICE_DEBUG

int
BMI055_gyro::init()
{
	int ret;

	/* do SPI init (and probe) first */
	ret = SPI::init();

	/* if probe/setup failed, bail now */
	if (ret != OK) {
		DEVICE_DEBUG("SPI setup failed");
		return ret;
	}

	/* allocate basic report buffers */
	_gyro_reports = new ringbuffer::RingBuffer(2, sizeof(accel_report));

	if (_gyro_reports == nullptr) {
		goto out;
	}

	if (reset() != OK) {
		goto out;
	}

	/* Initialize offsets and scales */
	_gyro_scale.x_offset = 0;
	_gyro_scale.x_scale  = 1.0f;
	_gyro_scale.y_offset = 0;
	_gyro_scale.y_scale  = 1.0f;
	_gyro_scale.z_offset = 0;
	_gyro_scale.z_scale  = 1.0f;


	/* if probe/setup failed, bail now */
	if (ret != OK) {
		DEVICE_DEBUG("gyro init failed");
		return ret;
	}

	_gyro_class_instance = register_class_devname(GYRO_BASE_DEVICE_PATH);

	measure();

	/* advertise sensor topic, measure manually to initialize valid report */
	struct gyro_report grp;
	_gyro_reports->get(&grp);

	_gyro_topic = orb_advertise_multi(ORB_ID(sensor_gyro), &grp,
					  &_gyro_orb_class_instance, (external()) ? ORB_PRIO_MAX - 1 : ORB_PRIO_HIGH - 1);

	if (_gyro_topic == nullptr) {
		warnx("ADVERT FAIL");
	}

out:
	return ret;
}

开发者ID:alsaibie，项目名称:Firmware_Dolphin，代码行数:58，代码来源:bmi055_gyro.cpp

示例12: register_class_devname

int
FXOS8700CQ_mag::init()
{
	int ret;

	ret = CDev::init();

	if (ret == OK) {
		_mag_class_instance = register_class_devname(MAG_BASE_DEVICE_PATH);
	}

	return ret;
}

开发者ID:bo-rc，项目名称:Firmware，代码行数:13，代码来源:fxos8700cq.cpp

示例13: sizeof

int
PX4FLOW::init()
{
	int ret = PX4_ERROR;

	/* do I2C init (and probe) first */
	if (I2C::init() != OK) {
		return ret;
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(optical_flow_s));

	if (_reports == nullptr) {
		return ret;
	}

	_class_instance = register_class_devname(RANGE_FINDER_BASE_DEVICE_PATH);

	/* get a publish handle on the range finder topic */
	struct distance_sensor_s ds_report = {};

	if (_class_instance == CLASS_DEVICE_PRIMARY) {
		_distance_sensor_topic = orb_advertise_multi(ORB_ID(distance_sensor), &ds_report,
					 &_orb_class_instance, ORB_PRIO_HIGH);

		if (_distance_sensor_topic == nullptr) {
			DEVICE_LOG("failed to create distance_sensor object. Did you start uOrb?");
		}

	} else {
		DEVICE_LOG("not primary range device, not advertising");
	}

	ret = OK;
	/* sensor is ok, but we don't really know if it is within range */
	_sensor_ok = true;

	/* get yaw rotation from sensor frame to body frame */
	param_t rot = param_find("SENS_FLOW_ROT");

	/* only set it if the parameter exists */
	if (rot != PARAM_INVALID) {
		int32_t val = 6; // the recommended installation for the flow sensor is with the Y sensor axis forward
		param_get(rot, &val);

		_sensor_rotation = (enum Rotation)val;
	}

	return ret;
}

开发者ID:Aerovinci，项目名称:Firmware，代码行数:51，代码来源:px4flow.cpp

示例14: register_class_devname

int
LSM303D_mag::init()
{
	int ret;

	ret = CDev::init();
	if (ret != OK)
		goto out;

	_mag_class_instance = register_class_devname(MAG_DEVICE_PATH);

out:
	return ret;
}

开发者ID:9510030662，项目名称:Firmware，代码行数:14，代码来源:lsm303d.cpp

示例15: PX4_ERR

int
FXAS21002C::init()
{
	/* do SPI init (and probe) first */
	if (SPI::init() != OK) {
		PX4_ERR("SPI init failed");
		return PX4_ERROR;
	}

	param_t gyro_cut_ph = param_find("IMU_GYRO_CUTOFF");
	float gyro_cut = FXAS21002C_DEFAULT_FILTER_FREQ;

	if (gyro_cut_ph != PARAM_INVALID && param_get(gyro_cut_ph, &gyro_cut) == PX4_OK) {
		PX4_INFO("gyro cutoff set to %.2f Hz", double(gyro_cut));

		set_sw_lowpass_filter(FXAS21002C_DEFAULT_RATE, gyro_cut);

	} else {
		PX4_ERR("IMU_GYRO_CUTOFF param invalid");
	}

	/* allocate basic report buffers */
	_reports = new ringbuffer::RingBuffer(2, sizeof(gyro_report));

	if (_reports == nullptr) {
		return PX4_ERROR;
	}

	reset();

	/* fill report structures */
	measure();

	_class_instance = register_class_devname(GYRO_BASE_DEVICE_PATH);

	/* advertise sensor topic, measure manually to initialize valid report */
	struct gyro_report grp;
	_reports->get(&grp);

	/* measurement will have generated a report, publish */
	_gyro_topic = orb_advertise_multi(ORB_ID(sensor_gyro), &grp,
					  &_orb_class_instance, (external()) ? ORB_PRIO_VERY_HIGH : ORB_PRIO_DEFAULT);

	if (_gyro_topic == nullptr) {
		PX4_ERR("ADVERT ERR");
		return PX4_ERROR;
	}

	return PX4_OK;
}

开发者ID:airmind，项目名称:OpenMindPX，代码行数:50，代码来源:fxas21002c.cpp

示例16: RingBuffer

int
L3GD20::init()
{
	int ret = ERROR;

	/* do SPI init (and probe) first */
	if (SPI::init() != OK)
		goto out;

	/* allocate basic report buffers */
	_reports = new RingBuffer(2, sizeof(gyro_report));

	if (_reports == nullptr)
		goto out;

	_class_instance = register_class_devname(GYRO_DEVICE_PATH);

	switch (_class_instance) {
		case CLASS_DEVICE_PRIMARY:
			_orb_id = ORB_ID(sensor_gyro0);
			break;

		case CLASS_DEVICE_SECONDARY:
			_orb_id = ORB_ID(sensor_gyro1);
			break;

		case CLASS_DEVICE_TERTIARY:
			_orb_id = ORB_ID(sensor_gyro2);
			break;
	}

	reset();

	measure();

	/* advertise sensor topic, measure manually to initialize valid report */
	struct gyro_report grp;
	_reports->get(&grp);

	_gyro_topic = orb_advertise(_orb_id, &grp);

	if (_gyro_topic < 0) {
		debug("failed to create sensor_gyro publication");
	}

	ret = OK;
out:
	return ret;
}

开发者ID:363546178，项目名称:PX4_STM32F4DISCOVERY，代码行数:49，代码来源:l3gd20.cpp

示例17: DEVICE_DEBUG

int
ADIS16477_gyro::init()
{
	int ret = CDev::init();

	/* if probe/setup failed, bail now */
	if (ret != OK) {
		DEVICE_DEBUG("gyro init failed");
		return ret;
	}

	_gyro_class_instance = register_class_devname(GYRO_BASE_DEVICE_PATH);

	return ret;
}

开发者ID:AlexisTM，项目名称:Firmware，代码行数:15，代码来源:ADIS16477_gyro.cpp

示例18: ringbuf_deinit

int
IIS328DQ::init()
{
	int ret = ERROR;
	
	if (probe() != OK)
		goto out;

	/* do SPI init (and probe) first */
	if (CDev::init() != OK)
		goto out;

	/* allocate basic report buffers */
	if (_reports != NULL) {
        ringbuf_deinit(_reports);
		vPortFree(_reports);
		_reports = NULL;
	}
	/* allocate basic report buffers */
	_reports = (ringbuf_t *) pvPortMalloc (sizeof(ringbuf_t));
	ringbuf_init(_reports, 2, sizeof(accel_report));

	if (_reports == NULL)
		goto out;

	_class_instance = register_class_devname(ACCEL_BASE_DEVICE_PATH);

	reset();

	measure();

	/* advertise sensor topic, measure manually to initialize valid report */
	struct accel_report arp;
	ringbuf_get(_reports, &arp, sizeof(arp));

	_accel_topic = orb_advertise_multi(ORB_ID(sensor_accel), &arp,
		&_orb_class_instance, (is_external()) ? ORB_PRIO_VERY_HIGH : ORB_PRIO_DEFAULT);

	if (_accel_topic == NULL) {
		DEVICE_DEBUG("failed to create sensor_accel publication");
	}

	ret = OK;
out:
	return ret;
}

开发者ID:SovietUnion1997，项目名称:PhenixPro_Devkit，代码行数:46，代码来源:iis328dq.cpp

示例19: warnx

int
LSM303D::init()
{
	int ret = ERROR;
	int mag_ret;

	/* do SPI init (and probe) first */
	if (SPI::init() != OK) {
		warnx("SPI init failed");
		goto out;
	}

	/* allocate basic report buffers */
	_accel_reports = new RingBuffer(2, sizeof(accel_report));

	if (_accel_reports == nullptr)
		goto out;

	/* advertise accel topic */
	_mag_reports = new RingBuffer(2, sizeof(mag_report));

	if (_mag_reports == nullptr)
		goto out;

	reset();

	/* do CDev init for the mag device node */
	ret = _mag->init();
	if (ret != OK) {
		warnx("MAG init failed");
		goto out;
	}

	_class_instance = register_class_devname(ACCEL_DEVICE_PATH);
	if (_class_instance == CLASS_DEVICE_PRIMARY) {
		// we are the primary accel device, so advertise to
		// the ORB
		struct accel_report zero_report;
		memset(&zero_report, 0, sizeof(zero_report));
		_accel_topic = orb_advertise(ORB_ID(sensor_accel), &zero_report);
	}

out:
	return ret;
}

开发者ID:DrTon，项目名称:Firmware，代码行数:45，代码来源:lsm303d.cpp

示例20: sizeof

int
SF0X::init()
{
	/* status */
	int ret = 0;

	do { /* create a scope to handle exit conditions using break */

		/* do regular cdev init */
		ret = CDev::init();

		if (ret != OK) { break; }

		/* allocate basic report buffers */
		_reports = new ringbuffer::RingBuffer(2, sizeof(distance_sensor_s));

		if (_reports == nullptr) {
			warnx("mem err");
			ret = -1;
			break;
		}

		_class_instance = register_class_devname(RANGE_FINDER_BASE_DEVICE_PATH);

		if (_class_instance == CLASS_DEVICE_PRIMARY) {
			/* get a publish handle on the range finder topic */
			struct distance_sensor_s ds_report = {};

			_distance_sensor_topic = orb_advertise_multi(ORB_ID(distance_sensor), &ds_report,
						 &_orb_class_instance, ORB_PRIO_HIGH);

			if (_distance_sensor_topic == nullptr) {
				DEVICE_LOG("failed to create distance_sensor object. Did you start uOrb?");
			}
		}

	} while (0);

	/* close the fd */
	::close(_fd);
	_fd = -1;

	return OK;
}

开发者ID:Jister，项目名称:Firmware，代码行数:44，代码来源:sf0x.cpp

注：本文中的register_class_devname函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ register_code函数代码示例发布时间：2022-05-30

C++ register_chrdev_region函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19182|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8638|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9655|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8622|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8652|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ register_class_devname函数代码示例

示例1: RingBuffer

示例2: CDev

示例3: DEVICE_DEBUG

示例4: sizeof

示例5: assert

示例6: RingBuffer

示例7: sizeof

示例8: RingBuffer

示例9: DEVICE_DEBUG

示例10: DEVICE_DEBUG

示例11: DEVICE_DEBUG

示例12: register_class_devname

示例13: sizeof

示例14: register_class_devname

示例15: PX4_ERR

示例16: RingBuffer

示例17: DEVICE_DEBUG

示例18: ringbuf_deinit

示例19: warnx

示例20: sizeof

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-24140

sussillo/hfopt-matlab: A parallel, cpu-b

emersion/go-ostatus: An OStatus library

spicetify/spicetify-cli: Commandline too

把的笔顺,知晓把的笔画,分析把的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053