本文整理汇总了C++中read_from_file函数的典型用法代码示例。如果您正苦于以下问题:C++ read_from_file函数的具体用法?C++ read_from_file怎么用?C++ read_from_file使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了read_from_file函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: message_complete_cb
int
message_complete_cb(http_parser* parser)
{
struct request_info *r = parser->data;
struct stat file_stat;
int exists;
char datestring[256];
struct tm *tm;
if (strstr(r->file, "..") != NULL) {
send_error(r, 404);
return 0;
}
exists = stat(r->file, &file_stat);
if (exists != 0){
switch (errno){
case EACCES:
send_error(r, 403);
break;
default:
send_error(r, 404);
break;
}
return 0;
} else { /* The file exists */
/* Test if it's a folder */
if (S_ISDIR(file_stat.st_mode) > 0) {
send_error(r, 404);
return 0;
}
tm = localtime(&file_stat.st_mtime);
/* Get localized date string. */
strftime(datestring, sizeof(datestring), DATE_FORMAT, tm);
evbuffer_add_printf(r->buf, "HTTP/1.0 200 OK\r\n");
evbuffer_add_printf(r->buf, "Content-Length: %9jd\r\n",
(intmax_t)file_stat.st_size);
evbuffer_add_printf(r->buf, "Last-Modified: %s\r\n", datestring);
add_headers(r->buf);
}
if (parser->method == HTTP_HEAD) {
event_add(&r->wr_ev, NULL);
} else {
// Open the file for parsing to body
if (read_from_file(r) == -1) {
evbuffer_drain(r->buf, EVBUFFER_LENGTH(r->buf));
send_error(r, 500);
return 0;
}
// Send reponse with body now :)
event_add(&r->wr_ev, NULL);
}
printf("complete\n");
return 0;
}
开发者ID:cavejay,项目名称:3301httpserver,代码行数:60,代码来源:http_callbacks.c
示例2: read_cpu_scaling_governor
static void read_cpu_scaling_governor(void)
{
nominal_cpu_scaling_governor =
read_from_file(config_file.cpufreq_file_paths[SCALING_GOVERNOR_PATH]);
/*
* FIXME : Should be fully useless. But without this, the
* value of nominal_cpu_scaling_governor is not correct when used
*/
if (strcmp(nominal_cpu_scaling_governor, ("hotplug")) == 0)
nominal_cpu_scaling_governor = "hotplug";
else if (strcmp(nominal_cpu_scaling_governor, ("conservative")) == 0)
nominal_cpu_scaling_governor = "conservative";
else if (strcmp(nominal_cpu_scaling_governor, ("ondemand")) == 0)
nominal_cpu_scaling_governor = "ondemand";
else if (strcmp(nominal_cpu_scaling_governor, ("userspace")) == 0)
nominal_cpu_scaling_governor = "userspace";
else if (strcmp(nominal_cpu_scaling_governor, ("performance")) == 0)
nominal_cpu_scaling_governor = "performance";
#ifdef DEBUG
LOGD("nominal_cpu_scaling_governor is %s\n",
nominal_cpu_scaling_governor);
fflush(stdout);
#endif
}
开发者ID:CM7lu3000,项目名称:android_hardware_ti_omap3,代码行数:26,代码来源:cpu_thermal_governor.c
示例3: pm_run_process
/**
* Run the process
**/
process_return_t* pm_run_process(process_t *process)
{
process_return_t* ret = pm_new_process_return();
// Setup the stdin
int child_stdin;
if (ret == NULL) return NULL;
if (process->env) process->env[process->env_c] = NULL;
// Run afterhook
if (process->before) {
if (run_hook(BEFORE_HOOK, process, ret)) return ret;
}
ret->stage = PRS_COMMAND;
pid_t pid = pm_execute(1, (const char*)process->command,
(const char*)process->cd,
(int)process->nice,
(const char**)process->env,
&child_stdin,
(const char*)process->stdout, (const char*)process->stderr);
ret->pid = pid;
ret->exit_status = wait_for_pid(pid, 0);
if (ret->exit_status) {
if (errno) {
if (process->stdout) ret->stdout = read_from_file((const char*)process->stdout);
if (process->stderr) ret->stderr = read_from_file((const char*)process->stderr);
else {
ret->stderr = (char*)calloc(1, sizeof(char)*strlen(strerror(errno)));
strncpy(ret->stderr, strerror(errno), strlen(strerror(errno)));
}
}
return ret;
}
// Run afterhook
if (process->after) {
if (run_hook(AFTER_HOOK, process, ret)) return ret;
}
// Yay, we finished properly
ret->stage = PRS_OKAY;
return ret;
}
开发者ID:alepharchives,项目名称:babysitter,代码行数:50,代码来源:process_manager.c
示例4: read_from_file_optional
bool read_from_file_optional( const std::string &path,
const std::function<void( std::istream & )> &reader )
{
// Note: slight race condition here, but we'll ignore it. Worst case: the file
// exists and got removed before reading it -> reading fails with a message
// Or file does not exists, than everything works fine because it's optional anyway.
return file_exist( path ) && read_from_file( path, reader );
}
开发者ID:Wuzzy2,项目名称:Cataclysm-DDA,代码行数:8,代码来源:cata_utility.cpp
示例5: init_cpu_thermal_governor
/*
* Initialize some internal parameters.
*/
void init_cpu_thermal_governor(u32 omap_temp)
{
int i;
/* Initialize the nominal_cpu_scaling_max_freq variable */
current_scaling_max_freq = atoi(read_from_file(
config_file.cpufreq_file_paths[SCALING_MAX_FREQ_PATH]));
/* Initialize the nominal_cpu_scaling_governor variable */
read_cpu_scaling_governor();
/* Initialize the available_freq[] int array */
read_cpu_scaling_available_freq();
/* Initialize the nominal maximum CPU frequency from the available_freq array */
nominal_cpu_scaling_max_freq = available_freq[0];
for (i = 1; i < OPPS_NUMBER; i++) {
if (available_freq[i] > nominal_cpu_scaling_max_freq)
nominal_cpu_scaling_max_freq = available_freq[i];
}
#ifdef DEBUG
LOGD("nominal/current_scaling_max_freq is %ld / %ld\n",
nominal_cpu_scaling_max_freq, current_scaling_max_freq);
#endif
/* Initialize the available_governors[] string array */
read_cpu_scaling_available_governors();
/* Check if "conservative" governor is available */
for (i = 0; i < GOVS_NUMBER; i++) {
if (strcmp(available_governors[i],("conservative")) == 0) {
is_conservative_available = true;
}
}
#ifdef DEBUG
if (is_conservative_available == true) {
LOGD("conservative governor is available\n");
fflush(stdout);
} else {
LOGD("conservative governor is not available\n");
fflush(stdout);
}
#endif
/*
* Force to initialize all temperature thresholds according to
* the current thermal zone */
cpu_thermal_governor(omap_temp);
#ifdef DEBUG
for (i = 0; i < OPPS_NUMBER; i++) {
LOGD("available_freq[%d] = %ld\n",
i,
available_freq[i]);
fflush(stdout);
}
#endif
}
开发者ID:CM7lu3000,项目名称:android_hardware_ti_omap3,代码行数:61,代码来源:cpu_thermal_governor.c
示例6: get_config_value
int get_config_value(char *config_key, char *reference)
{
char config_path[60];
strcpy(config_path, CONFIG_ROOT);
strcat(config_path, config_key);
return read_from_file(config_path, 30, reference);
}
开发者ID:bmourit,项目名称:oc_daemon,代码行数:9,代码来源:virtuous_oc.c
示例7: Configuration
Peer::Peer(const string &configFile) {
config = new Configuration(configFile);
set_id(get_host_id(config->hostIdType));
schedulerVec = read_from_file(config->schedulerMemFile);
set_index(get_self_idx(get_id(), schedulerVec));
running = true;
numZHTMsg = 0;
init_zht_client(config->zhtConfigFile, config->zhtMemFile);
}
开发者ID:aalayach,项目名称:zebra,代码行数:9,代码来源:util.cpp
示例8: file
bool session_file_storage::load(std::string const &sid,time_t &timeout,std::string &out)
{
locked_file file(this,sid);
if(!read_from_file(file.handle(),timeout,out)) {
::DeleteFile(file.name().c_str());
return false;
}
return true;
}
开发者ID:Kaoschuks,项目名称:cppcms,代码行数:9,代码来源:session_win32_file_storage.cpp
示例9: android_main
void android_main(android_app* state)
{
app_dummy();
LOGW("entered main");
state->userData = NULL;
state->onAppCmd = engine_handle_cmd;
state->onInputEvent = engine_handle_input;
// sdcard example
std::string file("/sdcard/text.txt");
LOGW("test file : %s", file.c_str());
write_to_file(file, "simple text");
read_from_file(file);
// device memory example
/// @todo : fix error
file = std::string("std_text.txt");
LOGW("test file : %s", file.c_str());
write_to_file(file, "simple text");
read_from_file(file);
while (true) {
int ident;
int events;
android_poll_source* source;
while ((ident = ALooper_pollAll(-1, NULL, &events, (void**) &source)) >= 0) {
if (source != NULL) {
source->process(state, source);
}
if (state->destroyRequested != 0) {
LOGW("exited main");
return;
}
}
}
}
开发者ID:proydakov,项目名称:androidzone,代码行数:44,代码来源:main.cpp
示例10: Show_rate
void __fastcall TForm1::Button2Click(TObject *Sender)
{
start=1;
//ответ не выбран
Panel1->BevelInner=bvNone;
Panel2->BevelInner=bvNone;
if (answer==-1)
{
Application->MessageBox("Выберите вариант ответа","Ошибка",MB_OK);
return;
}
if (answer==1)
{
Show_rate(Form1);
return;
}
if (answer==0)
{
answer=-1;
current_q++;
String q=read_from_file(rates[current_rate],current_q);
if (q!="")//если есть ещё вопросы в этом возрасте
Memo1->Text=q; //вывод вопроса
else
{
if (current_rate!=num_of_rates-1)
{
current_rate++;//в следующую возраст. группу
current_q=1; //с первого вопроса
String q=read_from_file(rates[current_rate],current_q);
//дошли до 0+
if (current_rate==4)
Show_rate(Form1);
else
Memo1->Text=q;
}
else
Show_rate(Form1);
}
}
start=0;
}
开发者ID:D3vills,项目名称:Programm,代码行数:44,代码来源:Unit1.cpp
示例11: main
int main(int argc, char *argv[]) {
if (argc < 4) {
fprintf(stderr, "Usage %s infile outfile threads\n", argv[0]);
exit(-1);
}
int fd_in = open(argv[1], O_RDONLY);
int fd_out = open(argv[2], O_RDWR | O_CREAT | O_TRUNC, S_IRWXU);
unsigned long uncomp_array_size = atol(argv[3]);
lz4_uncompression_work *uncomp_array;
pthread_t lz4uncomp_thread[uncomp_array_size];
unsigned long uncomp_ptr;
unsigned long total_bytes = 0;
uncomp_array = new lz4_uncompression_work[uncomp_array_size];
for (unsigned long i = 0; i < uncomp_array_size; i++) {
uncomp_array[i].fd_in = fd_in;
if(pthread_create(&lz4uncomp_thread[i],
NULL,
lz4_uncomp_service_start,
&uncomp_array[i]) != 0) {
printf("failed to launch exec thread\n");
exit(-1);
}
}
unsigned long nextbytes;
unsigned char header[11];
read_from_file(fd_in, header, 11);
nextbytes = uncomp_array[0].startup(header);
for (unsigned long i = 1; i < uncomp_array_size; i++) {
(void) uncomp_array[i].startup(header);
}
for (unsigned long i = 0; i < uncomp_array_size; i++) {
total_bytes += nextbytes;
nextbytes = uncomp_array[i].fill(nextbytes);
uncomp_array[i].busy = true;
}
uncomp_ptr = 0;
while (uncomp_array[uncomp_ptr].fillbytes) {
while (uncomp_array[uncomp_ptr].busy);
/* Write Block */
flush_output(fd_out,
(char *) uncomp_array[uncomp_ptr].uncomp_data,
uncomp_array[uncomp_ptr].uncomp_bytes);
total_bytes += nextbytes;
nextbytes = uncomp_array[uncomp_ptr].fill(nextbytes);
uncomp_array[uncomp_ptr].busy = true;
uncomp_ptr = (uncomp_ptr + 1) % uncomp_array_size;
}
for (unsigned long i = 0; i < uncomp_array_size; i++) {
uncomp_array[i].shutdown();
uncomp_array[i].terminate = true;
pthread_join(lz4uncomp_thread[i], NULL);
}
printf("Decompressed %lu\n", total_bytes);
return 0;
}
开发者ID:ar104,项目名称:cbdma,代码行数:56,代码来源:lz4uncomp_mt.cpp
示例12: main
int
main(int argc, char **argv)
{
FILE *in = argc > 1 ? fopen(argv[1], "r") : NULL;
int n = argc > 2 ? atoi(argv[2]) : 20;
int step = argc > 3 ? atoi(argv[3]) : 1;
int i;
char *base = argc > 4 ? argv[4] : "output/life";
char filename[255];
char *filenametemp = base;
strcpy(filename, filenametemp);
//int basenamel = strlen(filename);
#ifdef DEBUG
//printf("basenamel = %d\n", basenamel);
#endif
char basename[255];
strcpy(basename, filename);
if(in == NULL) {
if(argc > 1)
fprintf(stderr, "%s: problem z otwarciem pliku %s.\n", argv[0], argv[1]);
else
fprintf(stderr, "%s: prosze podac plik z danymi.\n", argv[0]);
return 1;
}
board_t *b = read_from_file(in);
//write_to_file(b, stdout);
board_t *backb = prepare_backstage_board(b);
for(i = 0; i < n; i++) {
if(i % step == 0) {
/* tworzenie nazwy pliku */
filename[0] = '\0';
strcat(filename, basename);
strcat(filename, "_"); // dopisanie do filename znaku _
char buf[20];
sprintf(buf, "%03d", i); // zamiana i na const char*
char* c = buf;
strcat(filename, c); // dopisanie do filename numeru generacji
strcat(filename, ".bmp"); // dopisanie do filename .bmp
write_to_bmp(b, filename);
}
prepare_next_states(b, backb); // to, co w momencie rozpoczecia tej funkcji jest na backb nas nie obchodzi
swap_boards(&b, &backb);
}
//printf("Stan planszy %d generacji pozniej:\n", n);
//write_to_file(b, stdout);
return 0;
}
开发者ID:aknj,项目名称:cellaut,代码行数:56,代码来源:main.c
示例13: read_from_textfile
void read_from_textfile(char *filename) {
FILE *fp = NULL;
fp = fopen(filename, "r");
if (fp == NULL) {
fprintf(stderr, "Can't open file %s\n", filename);
exit(1);
}
read_from_file(fp);
fclose(fp);
}
开发者ID:lgrangeia,项目名称:ttwatch,代码行数:11,代码来源:ttdiag.c
示例14: read_from_files
std::pair<configuration_parameters, std::vector<run_result> > read_from_files(const typename run_result::time_t &now,
std::size_t count, char ** fnames){
std::pair<configuration_parameters, std::vector<run_result> > result;
for (std::size_t i = 0; i < count; ++i){
auto partial = read_from_file(now,fnames[i]);
if (i > 0) assert (same_run(result.first,partial.first));
result.first = partial.first;
result.second.insert(result.second.end(),partial.second.begin(),partial.second.end());
}
return result;
}
开发者ID:mpmilano,项目名称:consistency-tester,代码行数:11,代码来源:read_file.hpp
示例15: read_old_scan
void
read_old_scan(const char *path)
{
size_t i;
int fd;
char *buf;
struct stat sb;
const char *entry_start;
const char *l_start, *l_end;
const char *s_start, *s_end;
const char *line, *eol;
for (i = 0; i < HASH_SIZE; ++i)
SLIST_INIT(&hash_table[i]);
if (path == NULL)
return;
if ((fd = open(path, O_RDONLY)) == -1)
return;
if (fstat(fd, &sb) == -1) {
close(fd);
return;
}
scan_mtime = sb.st_mtime;
buf = read_from_file(fd);
entry_start = buf;
l_start = l_end = NULL;
entry_start = buf;
s_start = s_end = NULL;
for (line = buf; *line; line = eol) {
eol = strchr(line, '\n');
if (eol == NULL)
errx(1, "Incomplete old scan");
++eol;
if (strncmp(line, "PKGNAME=", 8) == 0) {
if (line == buf)
continue;
add_entry(l_start, l_end, s_start, s_end,
entry_start, line);
l_start = l_end = NULL;
entry_start = line;
s_start = s_end = NULL;
} else if (strncmp(line, "PKG_LOCATION=", 13) == 0) {
l_start = line + 13;
l_end = eol - 1;
} else if (strncmp(line, "SCAN_DEPENDS=", 13) == 0) {
s_start = line + 13;
s_end = eol - 1;
}
}
if (entry_start != line)
add_entry(l_start, l_end, s_start, s_end,
entry_start, line);
}
开发者ID:petabi,项目名称:pkgsrc,代码行数:54,代码来源:jobs.c
示例16: do_restore_tls_stack
static void
do_restore_tls_stack(int sckpt_fd)
{
int tnr = ckpt_head.tnr;
TRACE(REPLAYER_TARGET, "tnr = %d\n", tnr);
replay_init_tls(tnr);
stack_base = TNR_TO_STACK(tnr);
stack_end = stack_base + TLS_STACK_SIZE;
void * real_stack_base = stack_base + GUARDER_LENGTH;
while (TRUE) {
struct mem_region region;
read_from_file(sckpt_fd, ®ion, sizeof(region));
if (region.start == MEM_REGIONS_END_MARK)
FATAL(REPLAYER_TARGET, "unable to find tls stack in ckpt\n");
skip_nbytes(sckpt_fd, region.fn_sz);
/* read real region sz */
int real_region_sz;
read_from_file(sckpt_fd, &real_region_sz, sizeof(real_region_sz));
TRACE(REPLAYER_TARGET, "compare: 0x%8x-0x%8x %8x-%8x\n", region.start,
region.end, (uintptr_t)real_stack_base,
(uintptr_t)stack_end);
if ((region.start == (uintptr_t)real_stack_base) &&
(region.end == (uintptr_t)stack_end)) {
/* we find it! */
read_from_file(sckpt_fd, real_stack_base, TLS_STACK_SIZE -
GUARDER_LENGTH);
break;
}
skip_nbytes(sckpt_fd, real_region_sz);
}
TRACE(REPLAYER_TARGET, "tls stack is restored\n");
}
开发者ID:pi3orama,项目名称:Snitchaser,代码行数:41,代码来源:replayer.c
示例17: search_by_code
int search_by_code(char* entidad, int code){
FILE * block_file;
struct record_t *record;
struct block_t * current_block;
struct file_header * file_header;
int res, i = 1, j = 1, recs = 0;
int current_pos = 0, encontrado = 1;
block_file = open_block_file(entidad, 2);
if(!block_file){
return BAD_NAME_FILE;
}
/* Allocate buffer and record */
record = (struct record_t*) malloc(sizeof(struct record_t));
current_block = (struct block_t *) malloc(sizeof(struct block_t));
file_header = (struct file_header*) malloc(sizeof(struct file_header));
if(!record || !current_block || !file_header)
return ALLOCATE_FAIL;
initialize_record(record);
initialize_block(current_block,1);
read_header(block_file, file_header);
while((i < file_header->total_blocks+1) && (encontrado == 1)){
current_pos = 0;
j = 1;
res = read_from_file(block_file, current_block, file_header, i);
if(res == RES_OK){
recs = current_block->total_reg;
while((j < recs+1) && (encontrado == 1)){
initialize_record(record);
current_pos += read_block(current_block, record, current_pos);
if(code == record->code){
print_success_message(record);
encontrado = 0;
}
free(record->content);
j++;
}
}
i++;
}
if(encontrado == 1){
print_error_message(code);
}
free(record);
free(file_header);
free(current_block);
fclose(block_file);
return res;
}
开发者ID:jmoren,项目名称:block_file,代码行数:53,代码来源:main.c
示例18: windows_tz_to_tzid
static void windows_tz_to_tzid(char *buf, int max, Str name)
{
Tok tk;
char *path = path_normalize(NULL, fs->fox_home, "data" SEP_S "windows-tz.txt", -1, NULL);
char *ini_buf = read_from_file(NULL, path, NULL);
free(path);
if (buf == NULL) {
goto ERROR_END;
}
Tok_simple_init(&tk, ini_buf);
Tok_simple_next(&tk);
for (;;) {
switch (tk.v.type) {
case TL_STR:
if (str_eq(tk.str_val.p, tk.str_val.size, name.p, name.size)) {
Tok_simple_next(&tk);
if (tk.v.type != T_LET) {
goto ERROR_END;
}
Tok_simple_next(&tk);
if (tk.v.type != TL_STR) {
goto ERROR_END;
}
memcpy(buf, tk.str_val.p, tk.str_val.size);
buf[tk.str_val.size] = '\0';
free(ini_buf);
return;
} else {
// 行末まで飛ばす
while (tk.v.type == T_LET || tk.v.type == TL_STR) {
Tok_simple_next(&tk);
}
}
break;
case T_NL:
case T_SEMICL:
Tok_simple_next(&tk);
break;
case T_EOF:
goto ERROR_END;
default:
fatal_errorf("Parse error at line %d (windows-tz.txt)", tk.v.line);
break;
}
}
ERROR_END:
strcpy(buf, "Etc/UTC");
free(ini_buf);
}
开发者ID:x768,项目名称:fox-lang,代码行数:53,代码来源:c_win_cl_gui.c
示例19: q_form_ini
void __fastcall TForm1::Button1Click(TObject *Sender)
{
start=1;
q_form_ini(Form1);
answer=-1;
//start test
init_rates();// array of rates
String q=read_from_file(rates[current_rate],current_q);
Memo1->Text=q;
start=0;
}
开发者ID:D3vills,项目名称:Programm,代码行数:12,代码来源:Unit1.cpp
示例20: read_head
static void
read_head(struct checkpoint_head * head, int fd)
{
TRACE(REPLAYER_TARGET, "read ckpt head\n");
read_from_file(fd, head, sizeof(*head));
/* head checker */
if (memcmp(head->magic, CKPT_MAGIC, CKPT_MAGIC_SZ) != 0)
FATAL(REPLAYER_TARGET, "checkpoint magic error\n");
TRACE(REPLAYER_TARGET, "checkpoint head magic passed\n");
TRACE(REPLAYER_TARGET, "pid=%d, tid=%d, tnr=%d\n", head->pid, head->tid, head->tnr);
}
开发者ID:pi3orama,项目名称:Snitchaser,代码行数:12,代码来源:replayer.c
注:本文中的read_from_file函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论