• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ read_c0_cause函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中read_c0_cause函数的典型用法代码示例。如果您正苦于以下问题：C++ read_c0_cause函数的具体用法？C++ read_c0_cause怎么用？C++ read_c0_cause使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了read_c0_cause函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ath_be_handler

int ath_be_handler(struct pt_regs *regs, int is_fixup)
{
#ifdef CONFIG_MACH_AR934x
	printk("ath data bus error: cause 0x%x epc 0x%x\nrebooting...", read_c0_cause(), read_c0_epc());
	ath_restart(NULL);
#else
	printk("ath data bus error: cause %#x\n", read_c0_cause());
#endif
	return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
}
开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:10，代码来源:setup.c


示例2: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned long pending;

	pending = read_c0_status() & read_c0_cause() & ST0_IM;

	if (pending & STATUSF_IP7)
		do_IRQ(AR71XX_CPU_IRQ_TIMER);

	else if (pending & STATUSF_IP2)
		ip2_handler();

	else if (pending & STATUSF_IP4)
		do_IRQ(AR71XX_CPU_IRQ_GE0);

	else if (pending & STATUSF_IP5)
		do_IRQ(AR71XX_CPU_IRQ_GE1);

	else if (pending & STATUSF_IP3)
		ip3_handler();

	else if (pending & STATUSF_IP6)
		ar71xx_misc_irq_dispatch();

	else
		spurious_interrupt();
}
开发者ID:IoveSunny，项目名称:DreamBox，代码行数:27，代码来源:irq.c


示例3: c0_compare_interrupt

irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
{
	const int r2 = cpu_has_mips_r2;
	struct clock_event_device *cd;
	int cpu = smp_processor_id();

	/*
                  
                                                              
                                                                
                                                     
  */
	if (handle_perf_irq(r2))
		goto out;

	/*
                                                                     
                                                                 
                                                            
  */
	if (!r2 || (read_c0_cause() & (1 << 30))) {
		/*                               */
		write_c0_compare(read_c0_compare());
		cd = &per_cpu(mips_clockevent_device, cpu);
		cd->event_handler(cd);
	}

out:
	return IRQ_HANDLED;
}
开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:30，代码来源:cevt-r4k.c


示例4: plat_irq_dispatch

/*! @brief the interrupt exception service function.
 *	@details The \cplat_irq_dispatch() function is the interrupt exception
 *	service function called. When an exception is set and the exception
 *	code indicates an interrupt (0x00).
 */
asmlinkage void plat_irq_dispatch(
	struct pt_regs			*regs	/*!< registers of the interrupted task */
)
{
	/* Get the current pending interrupt status */
	unsigned long	pending = read_c0_cause() & read_c0_status();

	/*!	@note Clear all pending interrupts before dispatching. The
		interrupt information structure will call the "end" function
		from the do_IRQ function that should re-enable the specific
		interrupt while completing the interrupt handling (see
		irq_chip structure). */
	/* Disable all MIPS active pending interrupts */
	clear_c0_status(pending);
	/* These are the interrupts that are to be dispatched */
	if( pending & (STATUSF_IP7|STATUSF_IP2) ) {
		/* Dispatch timer interrupt (HW INT#5/IP7)  */
		if (pending & STATUSF_IP7)
			brcm_mips_int7_dispatch(regs);
		/* Dispatch shared interrupt (HW INT#0/IP2)  */
		if (pending & STATUSF_IP2)
			brcm_mips_int2_dispatch(regs);
		/* Return following the successful interrupt exception handling */
		return;
	}
	/* Other interrupts are unhandled and treated as spurious interrupts */
	spurious_interrupt(regs);
}
开发者ID:jameshilliard，项目名称:20-4-4，代码行数:33，代码来源:irq.c


示例5: brcm_irq_dispatch

void
brcm_irq_dispatch(struct pt_regs *regs)
{
	u32 cause;

	cause = read_c0_cause() &
		read_c0_status() &
		CAUSEF_IP;

#ifdef CONFIG_KERNPROF
	change_c0_status(cause | 1, 1);
#else
	clear_c0_status(cause);
#endif

	if (cause & CAUSEF_IP7)
		do_IRQ(7, regs);
	if (cause & CAUSEF_IP2)
		do_IRQ(2, regs);
	if (cause & CAUSEF_IP3)
		do_IRQ(3, regs);
	if (cause & CAUSEF_IP4)
		do_IRQ(4, regs);
	if (cause & CAUSEF_IP5)
		do_IRQ(5, regs);
	if (cause & CAUSEF_IP6)
		do_IRQ(6, regs);
}
开发者ID:Cribstone，项目名称:linino，代码行数:28，代码来源:irq.c


示例6: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned int pending = read_c0_status() & read_c0_cause();

	if (pending & CAUSEF_IP7)	
	{
		do_IRQ(M36_IRQ_TIMER);
	}
	else if ((pending & CAUSEF_IP3) || (pending & CAUSEF_IP2))
	{
		sys_irqdispatch();
	}
	else
	{
#ifdef CONFIG_ENABLE_RPC
		{
			unsigned long rpc_status;

			rpc_status = *(volatile unsigned char *)(sys_rpc_addr);
			rpc_status &= sys_rpc_mask;
			
			if(rpc_status & sys_rpc_irq1_mask)
				do_IRQ(71);
			
			if(rpc_status & sys_rpc_irq2_mask)
				do_IRQ(70);	
		}
#endif
		spurious_interrupt();
	}
}
开发者ID:qttest1，项目名称:PDK_GoBian，代码行数:31，代码来源:m36_irq.c


示例7: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned long pending;

	pending = read_c0_status() & read_c0_cause() & ST0_IM;

	if (pending & STATUSF_IP7)
		do_IRQ(ATH79_CPU_IRQ(7));

	else if (pending & STATUSF_IP2)
		ath79_ip2_handler();

	else if (pending & STATUSF_IP4)
		do_IRQ(ATH79_CPU_IRQ(4));

	else if (pending & STATUSF_IP5)
		do_IRQ(ATH79_CPU_IRQ(5));

	else if (pending & STATUSF_IP3)
		ath79_ip3_handler();

	else if (pending & STATUSF_IP6)
		do_IRQ(ATH79_CPU_IRQ(6));

	else
		spurious_interrupt();
}
开发者ID:NETFORCE2，项目名称:OpenWrt-14.07-Barrier-Breaker，代码行数:27，代码来源:irq.c


示例8: smtc_timer_interrupt

irqreturn_t smtc_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
	int cpu = smp_processor_id();
	int vpflags;

	if (read_c0_cause() & (1 << 30)) {
		/* If timer interrupt, make it de-assert */
		write_c0_compare (read_c0_count() - 1);

                vpflags = dvpe();
                clear_c0_cause(0x100<<7);
                evpe(vpflags);

		/*
		 * There are things we only want to do once per tick
		 * in an "MP" system.   One TC of each VPE will take
		 * the actual timer interrupt.  The others will get
		 * timer broadcast IPIs. We use whoever it is that takes
		 * the tick on VPE 0 to run the full timer_interrupt().
		 */
		if (cpu_data[cpu].vpe_id == 0) {
				timer_interrupt(irq, NULL, regs);
				smtc_timer_broadcast(cpu_data[cpu].vpe_id);

		} else {
			write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
			local_timer_interrupt(irq, dev_id, regs);
			smtc_timer_broadcast(cpu_data[cpu].vpe_id);
		}
	}

	return IRQ_HANDLED;
}
开发者ID:jameshilliard，项目名称:stblinux-2.6.18_7405，代码行数:33，代码来源:setup.c


示例9: tx4939_proc_show_cp0

static int
tx4939_proc_show_cp0(char *sysbuf, char **start, off_t off,
		     int count, int *eof, void *data)
{
	int len = 0;
	len += sprintf(sysbuf + len, "INDEX   :0x%08x\n", read_c0_index());
	len += sprintf(sysbuf + len, "ENTRYLO0:0x%08lx\n", read_c0_entrylo0());
	len += sprintf(sysbuf + len, "ENTRYLO1:0x%08lx\n", read_c0_entrylo1());
	len += sprintf(sysbuf + len, "CONTEXT :0x%08lx\n", read_c0_context());
	len += sprintf(sysbuf + len, "PAGEMASK:0x%08x\n", read_c0_pagemask());
	len += sprintf(sysbuf + len, "WIRED   :0x%08x\n", read_c0_wired());
	len += sprintf(sysbuf + len, "COUNT   :0x%08x\n", read_c0_count());
	len += sprintf(sysbuf + len, "ENTRYHI :0x%08lx\n", read_c0_entryhi());
	len += sprintf(sysbuf + len, "COMPARE :0x%08x\n", read_c0_compare());
	len += sprintf(sysbuf + len, "STATUS  :0x%08x\n", read_c0_status());
	len += sprintf(sysbuf + len, "CAUSE   :0x%08x\n", read_c0_cause());
	len += sprintf(sysbuf + len, "PRId    :0x%08x\n", read_c0_prid());
	len += sprintf(sysbuf + len, "CONFIG  :0x%08x\n", read_c0_config());
	len += sprintf(sysbuf + len, "XCONTEXT:0x%08lx\n", read_c0_xcontext());
	len += sprintf(sysbuf + len, "TagLo   :0x%08x\n", read_c0_taglo());
	len += sprintf(sysbuf + len, "TagHi   :0x%08x\n", read_c0_taghi());
	len += sprintf(sysbuf + len, "ErrorEPC:0x%08lx\n", read_c0_errorepc());
	*eof = 1;
	return len;
}
开发者ID:JacksonZhangkun，项目名称:linux-2.6，代码行数:25，代码来源:proc.c


示例10: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned int cpu = smp_processor_id();
	unsigned int pending;

	/*
	 * What a pain. We have to be really careful saving the upper 32 bits
	 * of any * register across function calls if we don't want them
	 * trashed--since were running in -o32, the calling routing never saves
	 * the full 64 bits of a register across a function call.  Being the
	 * interrupt handler, we're guaranteed that interrupts are disabled
	 * during this code so we don't have to worry about random interrupts
	 * blasting the high 32 bits.
	 */

	pending = read_c0_cause() & read_c0_status() & ST0_IM;

	if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
	else if (pending & CAUSEF_IP4)
		do_IRQ(K_INT_TIMER_0 + cpu); 	/* sb1250_timer_interrupt() */

#ifdef CONFIG_SMP
	else if (pending & CAUSEF_IP3)
		sb1250_mailbox_interrupt();
#endif

	else if (pending & CAUSEF_IP2)
		dispatch_ip2();
	else
		spurious_interrupt();
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:32，代码来源:irq.c


示例11: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned long pending;

	pending = read_c0_status() & read_c0_cause() & ST0_IM;

	if (pending & STATUSF_IP7)
		do_IRQ(AR71XX_CPU_IRQ_TIMER);

#ifdef CONFIG_PCI
	else if (pending & STATUSF_IP2)
		ar71xx_pci_irq_dispatch();
#endif

	else if (pending & STATUSF_IP4)
		do_IRQ(AR71XX_CPU_IRQ_GE0);

	else if (pending & STATUSF_IP5)
		do_IRQ(AR71XX_CPU_IRQ_GE1);

	else if (pending & STATUSF_IP3)
		do_IRQ(AR71XX_CPU_IRQ_USB);

	else if (pending & STATUSF_IP6)
		ar71xx_misc_irq_dispatch();

	else
		spurious_interrupt();
}
开发者ID:1x23，项目名称:unifi-gpl，代码行数:29，代码来源:irq.c


示例12: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned int cause = read_c0_cause();
	unsigned int status = read_c0_status();
	unsigned int pending = cause & status;

	if (pending & STATUSF_IP7) {
		do_IRQ(7);
	} else if (pending & STATUSF_IP2) {
#ifdef CONFIG_HYPERTRANSPORT
		ll_ht_smp_irq_handler(2);
#else
		do_IRQ(2);
#endif
	} else if (pending & STATUSF_IP3) {
		do_IRQ(3);
	} else if (pending & STATUSF_IP4) {
		do_IRQ(4);
	} else if (pending & STATUSF_IP5) {
#ifdef CONFIG_SMP
		titan_mailbox_irq();
#else
		do_IRQ(5);
#endif
	} else if (pending & STATUSF_IP6) {
		do_IRQ(4);
	}
}
开发者ID:007kumarraja，项目名称:rockchip-rk3188-mk908，代码行数:28，代码来源:irq.c


示例13: ar7240_irq_dispatch

/*
 * Dispatch interrupts. 
 * XXX: This currently does not prioritize except in calling order. Eventually
 * there should perhaps be a static map which defines, the IPs to be masked for
 * a given IP.
 */
void
ar7240_irq_dispatch(struct pt_regs *regs)
{
	int pending = read_c0_status() & read_c0_cause();

	if (pending & CAUSEF_IP7) 
        do_IRQ(AR7240_CPU_IRQ_TIMER, regs);

    else if (pending & CAUSEF_IP2) 
        ar7240_dispatch_pci_intr(regs);

    else if (pending & CAUSEF_IP4) 
        do_IRQ(AR7240_CPU_IRQ_GE0, regs);

    else if (pending & CAUSEF_IP5) 
        do_IRQ(AR7240_CPU_IRQ_GE1, regs);

    else if (pending & CAUSEF_IP3) 
        do_IRQ(AR7240_CPU_IRQ_USB, regs);

    else if (pending & CAUSEF_IP6) 
        ar7240_dispatch_misc_intr(regs);

    /*
     * Some PCI devices are write to clear. These writes are posted and might
     * require a flush (r8169.c e.g.). Its unclear what will have more 
     * performance impact - flush after every interrupt or taking a few
     * "spurious" interrupts. For now, its the latter.
     */
    /*else 
        printk("spurious IRQ pending: 0x%x\n", pending);*/
}
开发者ID:1x23，项目名称:unifi-gpl，代码行数:38，代码来源:irq.c


示例14: tx4927_irq_cp0_modify

static void
tx4927_irq_cp0_modify(unsigned cp0_reg, unsigned clr_bits, unsigned set_bits)
{
	unsigned long val = 0;

	switch (cp0_reg) {
	case CCP0_STATUS:
		val = read_c0_status();
		break;

	case CCP0_CAUSE:
		val = read_c0_cause();
		break;

	}

	val &= (~clr_bits);
	val |= (set_bits);

	switch (cp0_reg) {
	case CCP0_STATUS:{
			write_c0_status(val);
			break;
		}
	case CCP0_CAUSE:{
			write_c0_cause(val);
			break;
		}
	}

	return;
}
开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:32，代码来源:tx4927_irq.c


示例15: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned int cause = read_c0_cause();
	unsigned int pending;
	int cpuid = smp_processor_id();
	unsigned long flags;
	pending = cause & read_c0_status() & ST0_IM;
#ifdef CONFIG_SMP
	if(pending & CAUSEF_IP3) {
		ipr_spinlock(flags);
		//irq_intc_ctrlmask_affinity(cpuid,1);
		response_cpu_busy |= 1 << cpuid;
		ipr_spinunlock(flags);

		jzsoc_mbox_interrupt(cpuid);

		ipr_spinlock(flags);
		response_cpu_busy &= ~(1 << cpuid);
		//irq_intc_ctrlmask_affinity(cpuid,0);
		ipr_spinunlock(flags);
	}
#endif
	if (cause & CAUSEF_IP4) {
		do_IRQ(IRQ_OST);
	}

	if(pending & CAUSEF_IP2) {
		intc_irq_dispatch(cpuid);
	}
}
开发者ID:bgtwoigu，项目名称:kernel-inwatch，代码行数:30，代码来源:irq.c


示例16: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned long pending;

	pending = read_c0_status() & read_c0_cause() & ST0_IM;

	if (pending & STATUSF_IP7)
		do_IRQ(ATH79_CPU_IRQ_TIMER);

	else if (pending & STATUSF_IP2) {
		ath79_ddr_wb_flush(ath79_ip2_flush_reg);
		do_IRQ(ATH79_CPU_IRQ_IP2);
	}

	else if (pending & STATUSF_IP4)
		do_IRQ(ATH79_CPU_IRQ_GE0);

	else if (pending & STATUSF_IP5)
		do_IRQ(ATH79_CPU_IRQ_GE1);

	else if (pending & STATUSF_IP3) {
		ath79_ddr_wb_flush(ath79_ip3_flush_reg);
		do_IRQ(ATH79_CPU_IRQ_USB);
	}

	else if (pending & STATUSF_IP6)
		do_IRQ(ATH79_CPU_IRQ_MISC);

	else
		spurious_interrupt();
}
开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:31，代码来源:irq.c


示例17: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	unsigned int cpu = smp_processor_id();
	unsigned int pending;

#ifdef CONFIG_SIBYTE_BCM1480_PROF
	/* Set compare to count to silence count/compare timer interrupts */
	write_c0_compare(read_c0_count());
#endif

	pending = read_c0_cause() & read_c0_status();

#ifdef CONFIG_SIBYTE_BCM1480_PROF
	if (pending & CAUSEF_IP7)	/* Cpu performance counter interrupt */
		sbprof_cpu_intr();
	else
#endif

	if (pending & CAUSEF_IP4)
		do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
#ifdef CONFIG_SMP
	else if (pending & CAUSEF_IP3)
		bcm1480_mailbox_interrupt();
#endif

	else if (pending & CAUSEF_IP2)
		dispatch_ip2();
}
开发者ID:duanyujun，项目名称:androidgoldfish，代码行数:28，代码来源:irq.c


示例18: plat_irq_dispatch

asmlinkage void plat_irq_dispatch(void)
{
	u32 cause;

	do {
		cause = read_c0_cause() & read_c0_status() & ST0_IM;

		if (!cause)
			break;

		if (cause & CAUSEF_IP7)
			do_IRQ(7);
		if (cause & CAUSEF_IP2)
			dispatch_internal();
		if (!is_ext_irq_cascaded) {
			if (cause & CAUSEF_IP3)
				do_IRQ(IRQ_EXT_0);
			if (cause & CAUSEF_IP4)
				do_IRQ(IRQ_EXT_1);
			if (cause & CAUSEF_IP5)
				do_IRQ(IRQ_EXT_2);
			if (cause & CAUSEF_IP6)
				do_IRQ(IRQ_EXT_3);
		}
	} while (1);
}
开发者ID:8563，项目名称:millennium-sources，代码行数:26，代码来源:irq.c


示例19: default_exept_handle

void default_exept_handle(unsigned int *sp, unsigned int arg)
{
//	printf("Exception %d\n", arg);
//	printf("CAUSE=%08x EPC=%08x\n", read_c0_cause(), read_c0_epc());
//	printf("SP= %08x\n", sp);
//	printf("AT= %08x  ra= %08x  fp= %08x  gp= %08x\n",sp[27],sp[0],sp[1],sp[2]);
//  printf("t9= %08x  t8= %08x  s7= %08x  S6= %08x\n",sp[3],sp[4],sp[5],sp[6]);
//  printf("s5= %08x  s4= %08x  s3= %08x  s2= %08x\n",sp[7],sp[8],sp[9],sp[10]);
//  printf("s1= %08x  s0= %08x  t7= %08x  t6= %08x\n",sp[11],sp[12],sp[13],sp[14]);
//  printf("t5= %08x  t4= %08x  t3= %08x  t2= %08x\n",sp[15],sp[16],sp[17],sp[18]);
//  printf("t1= %08x  t0= %08x  a3= %08x  a2= %08x\n",sp[19],sp[20],sp[21],sp[22]);
//  printf("a1= %08x  a0= %08x  v1= %08x  v0= %08x\n",sp[23],sp[24],sp[25], sp[26]);
//	printf("\n");
//  printf("c_except_handler: while(1)");
//  printf("\n");

//	while(1);

	__except_sp = sp;
	__except_arg = arg;
	__except_cause = read_c0_cause();
	__except_epc = read_c0_epc();

	write_32bit_cp0_register(CP0_EPC, _except_idle);
	__asm__ __volatile__("eret\n\t");
}
开发者ID:173210，项目名称:ds2sdk，代码行数:26，代码来源:excpt.c


示例20: rsv_ins_except

void rsv_ins_except(unsigned int arg)
{
    unsigned int cause;
    unsigned int epc;
    unsigned int *ins;
    unsigned int i;

    cause = read_c0_cause();
    epc = read_c0_epc();

    printf("Reserved Instruction Exception\n");
	printf("CAUSE=%08x EPC=%08x\n", cause, epc);

    ins = (unsigned int*)epc -5;
    for(i= 0; i < 10; i++)
    {
        printf("%08x:  %08x\n", ins, *ins++);
    }

	printf("\n");
    printf("c_except_handler: while(1)");
    printf("\n");

    while(1);
}
开发者ID:173210，项目名称:ds2sdk，代码行数:25，代码来源:excpt.c



注：本文中的read_c0_cause函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ read_c0_entryhi函数代码示例发布时间：2022-05-30
下一篇：
C++ read_bytes函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap