C++ read32_delegate函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中read32_delegate函数的典型用法代码示例。如果您正苦于以下问题：C++ read32_delegate函数的具体用法？C++ read32_delegate怎么用？C++ read32_delegate使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了read32_delegate函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rand

void nubus_mac8390_device::device_start()
{
	UINT32 slotspace;
	char mac[7];
	UINT32 num = rand();
	memset(m_prom, 0x57, 16);
	sprintf(mac+2, "\x1b%c%c%c", (num >> 16) & 0xff, (num >> 8) & 0xff, num & 0xff);
	mac[0] = mac[1] = 0;  // avoid gcc warning
	memcpy(m_prom, mac, 6);
	m_dp83902->set_mac(mac);
	// set_nubus_device makes m_slot valid
	set_nubus_device();
	install_declaration_rom(this, MAC8390_ROM_REGION, true);

	slotspace = get_slotspace();

//  printf("[ASNTMC3NB %p] slotspace = %x\n", this, slotspace);

	// TODO: move 24-bit mirroring down into nubus.c
	UINT32 ofs_24bit = m_slot<<20;
	m_nubus->install_device(slotspace+0xd0000, slotspace+0xdffff, read8_delegate(FUNC(nubus_mac8390_device::asntm3b_ram_r), this), write8_delegate(FUNC(nubus_mac8390_device::asntm3b_ram_w), this));
	m_nubus->install_device(slotspace+0xe0000, slotspace+0xe003f, read32_delegate(FUNC(nubus_mac8390_device::en_r), this), write32_delegate(FUNC(nubus_mac8390_device::en_w), this));
	m_nubus->install_device(slotspace+0xd0000+ofs_24bit, slotspace+0xdffff+ofs_24bit, read8_delegate(FUNC(nubus_mac8390_device::asntm3b_ram_r), this), write8_delegate(FUNC(nubus_mac8390_device::asntm3b_ram_w), this));
	m_nubus->install_device(slotspace+0xe0000+ofs_24bit, slotspace+0xe003f+ofs_24bit, read32_delegate(FUNC(nubus_mac8390_device::en_r), this), write32_delegate(FUNC(nubus_mac8390_device::en_w), this));
}

开发者ID:CJBass，项目名称:mame2013-libretro，代码行数:25，代码来源:nubus_asntmc3b.c

示例2: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(beathead_state,beathead)
{
	/* prepare the speedups */
	m_maincpu->space(AS_PROGRAM).install_read_handler(0x00000ae8, 0x00000aeb, read32_delegate(FUNC(beathead_state::speedup_r), this));
	m_maincpu->space(AS_PROGRAM).install_read_handler(0x00000804, 0x00000807, read32_delegate(FUNC(beathead_state::movie_speedup_r), this));

	m_speedup_data = m_ram_base + 0xae8/4;
	m_movie_speedup_data = m_ram_base + 0x804/4;
}

开发者ID:Fulg，项目名称:mame，代码行数:9，代码来源:beathead.cpp

示例3: sizeof

void gt64xxx_device::map_cpu_space()
{
	UINT32 winStart, winEnd;

	// ROM region starts at 0x1fc00000
	m_cpu_space->unmap_readwrite(0x00000000, 0x1fbfffff);
	m_cpu_space->unmap_readwrite(0x20000000, 0xffffffff);

	// Clear fastram regions in cpu after rom
	m_cpu->clear_fastram(1);

	// CPU Regs
	winStart = m_reg[GREG_INTERNAL_SPACE]<<21;
	winEnd = winStart + sizeof(m_reg) - 1;
	m_cpu_space->install_device(winStart, winEnd, *static_cast<gt64xxx_device *>(this), &gt64xxx_device::cpu_map);
	if (LOG_GALILEO)
		logerror("%s: map_cpu_space cpu_reg start: %08X end: %08X\n", tag(), winStart, winEnd);

	// Ras0
	winStart = (m_reg[GREG_RAS_1_0_LO]<<21) | (m_reg[GREG_RAS0_LO]<<20);
	winEnd =   (m_reg[GREG_RAS_1_0_LO]<<21) | (m_reg[GREG_RAS0_HI]<<20) | 0xfffff;
	m_ram[0].resize((winEnd+1-winStart)/4);
	m_cpu_space->install_ram(winStart, winEnd, &m_ram[0][0]);
	m_cpu->add_fastram(winStart, m_ram[0].size()*sizeof(m_ram[0][0]), FALSE, &m_ram[0][0]);
	if (LOG_GALILEO)
		logerror("%s: map_cpu_space ras0 start: %08X end: %08X\n", tag(), winStart, winEnd);

	// PCI IO Window
	winStart = m_reg[GREG_PCI_IO_LO]<<21;
	winEnd =   (m_reg[GREG_PCI_IO_LO]<<21) | (m_reg[GREG_PCI_IO_HI]<<21) | 0x1fffff;
	m_cpu_space->install_read_handler(winStart, winEnd, 0, 0, read32_delegate(FUNC(gt64xxx_device::master_io_r), this));
	m_cpu_space->install_write_handler(winStart, winEnd, 0, 0, write32_delegate(FUNC(gt64xxx_device::master_io_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_cpu_space pci_io start: %08X end: %08X\n", tag(), winStart, winEnd);

	// PCI MEM0 Window
	winStart = m_reg[GREG_PCI_MEM0_LO]<<21;
	winEnd =   (m_reg[GREG_PCI_MEM0_LO]<<21) | (m_reg[GREG_PCI_MEM0_HI]<<21) | 0x1fffff;
	m_cpu_space->install_read_handler(winStart, winEnd, 0, 0, read32_delegate(FUNC(gt64xxx_device::master_mem0_r), this));
	m_cpu_space->install_write_handler(winStart, winEnd, 0, 0, write32_delegate(FUNC(gt64xxx_device::master_mem0_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_cpu_space pci_mem0 start: %08X end: %08X\n", tag(), winStart, winEnd);

	// PCI MEM1 Window
	winStart = m_reg[GREG_PCI_MEM1_LO]<<21;
	winEnd =   (m_reg[GREG_PCI_MEM1_LO]<<21) | (m_reg[GREG_PCI_MEM1_HI]<<21) | 0x1fffff;
	m_cpu_space->install_read_handler(winStart, winEnd, 0, 0, read32_delegate(FUNC(gt64xxx_device::master_mem1_r), this));
	m_cpu_space->install_write_handler(winStart, winEnd, 0, 0, write32_delegate(FUNC(gt64xxx_device::master_mem1_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_cpu_space pci_mem1 start: %08X end: %08X\n", tag(), winStart, winEnd);

}

开发者ID:Ashura-X，项目名称:mame，代码行数:52，代码来源:gt64xxx.cpp

示例4: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(gunbustr_state,gunbustr)
{
	/* Speedup handler */
	m_maincpu->space(AS_PROGRAM).install_read_handler(0x203acc, 0x203acf, read32_delegate(FUNC(gunbustr_state::main_cycle_r),this));

	m_interrupt5_timer = timer_alloc(TIMER_GUNBUSTR_INTERRUPT5);
}

开发者ID:qwijibo，项目名称:mame，代码行数:7，代码来源:gunbustr.cpp

示例5: read32_delegate

void gt64xxx_device::map_extra(UINT64 memory_window_start, UINT64 memory_window_end, UINT64 memory_offset, address_space *memory_space,
									UINT64 io_window_start, UINT64 io_window_end, UINT64 io_offset, address_space *io_space)
{
	int ramIndex;
	UINT32 winStart, winEnd, winSize;

	// Not sure if GREG_RAS_1_0_LO should be added on PCI address map side.
	// RAS0
	ramIndex = 0;
	winStart = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_LO + 0x8 / 4 * ramIndex] << 20);
	winEnd = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_HI + 0x8 / 4 * ramIndex] << 20) | 0xfffff;
	winSize = winEnd - winStart + 1;
	memory_space->install_read_handler(winStart, winEnd, read32_delegate(FUNC(gt64xxx_device::ras_0_r), this));
	memory_space->install_write_handler(winStart, winEnd, write32_delegate(FUNC(gt64xxx_device::ras_0_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_extra RAS0 start=%08X end=%08X size=%08X\n", tag(), winStart, winEnd, winSize);

	// RAS1
	ramIndex = 1;
	winStart = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_LO + 0x8 / 4 * ramIndex] << 20);
	winEnd = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_HI + 0x8 / 4 * ramIndex] << 20) | 0xfffff;
	winSize = winEnd - winStart + 1;
	memory_space->install_read_handler(winStart, winEnd, read32_delegate(FUNC(gt64xxx_device::ras_1_r), this));
	memory_space->install_write_handler(winStart, winEnd, write32_delegate(FUNC(gt64xxx_device::ras_1_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_extra RAS1 start=%08X end=%08X size=%08X\n", tag(), winStart, winEnd, winSize);

	// RAS2
	ramIndex = 2;
	winStart = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_LO + 0x8 / 4 * ramIndex] << 20);
	winEnd = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_HI + 0x8 / 4 * ramIndex] << 20) | 0xfffff;
	winSize = winEnd - winStart + 1;
	memory_space->install_read_handler(winStart, winEnd, read32_delegate(FUNC(gt64xxx_device::ras_2_r), this));
	memory_space->install_write_handler(winStart, winEnd, write32_delegate(FUNC(gt64xxx_device::ras_2_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_extra RAS2 start=%08X end=%08X size=%08X\n", tag(), winStart, winEnd, winSize);

	// RAS3
	ramIndex = 3;
	winStart = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_LO + 0x8 / 4 * ramIndex] << 20);
	winEnd = (m_reg[GREG_RAS_1_0_LO + 0x10 / 4 * (ramIndex / 2)] << 21) | (m_reg[GREG_RAS0_HI + 0x8 / 4 * ramIndex] << 20) | 0xfffff;
	winSize = winEnd - winStart + 1;
	memory_space->install_read_handler(winStart, winEnd, read32_delegate(FUNC(gt64xxx_device::ras_3_r), this));
	memory_space->install_write_handler(winStart, winEnd, write32_delegate(FUNC(gt64xxx_device::ras_3_w), this));
	if (LOG_GALILEO)
		logerror("%s: map_extra RAS3 start=%08X end=%08X size=%08X\n", tag(), winStart, winEnd, winSize);
}

开发者ID:Fulg，项目名称:mame，代码行数:47，代码来源:gt64xxx.cpp

示例6: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(calchase_state,calchase)
{
	m_bios_ram = auto_alloc_array(machine(), UINT32, 0x20000/4);

	intel82439tx_init();

	m_maincpu->space(AS_PROGRAM).install_readwrite_handler(0x3f0b160, 0x3f0b163, read32_delegate(FUNC(calchase_state::calchase_idle_skip_r),this), write32_delegate(FUNC(calchase_state::calchase_idle_skip_w),this));
}

开发者ID:curtiszimmerman，项目名称:mame，代码行数:8，代码来源:calchase.c

示例7: intel82439tx_init

void calchase_state::init_calchase()
{
	m_bios_ram = std::make_unique<uint32_t[]>(0x20000/4);

	intel82439tx_init();

	m_maincpu->space(AS_PROGRAM).install_readwrite_handler(0x3f0b160, 0x3f0b163, read32_delegate(FUNC(calchase_state::calchase_idle_skip_r),this), write32_delegate(FUNC(calchase_state::calchase_idle_skip_w),this));
}

开发者ID:k2-git，项目名称:mame，代码行数:8，代码来源:calchase.cpp

示例8: set_nubus_device

void nubus_image_device::device_start()
{
	UINT32 slotspace;
	UINT32 superslotspace;

	// set_nubus_device makes m_slot valid
	set_nubus_device();
	install_declaration_rom(this, IMAGE_ROM_REGION);

	slotspace = get_slotspace();
	superslotspace = get_super_slotspace();

//  printf("[image %p] slotspace = %x, super = %x\n", this, slotspace, superslotspace);

	m_nubus->install_device(slotspace, slotspace+3, read32_delegate(FUNC(nubus_image_device::image_r), this), write32_delegate(FUNC(nubus_image_device::image_w), this));
	m_nubus->install_device(slotspace+4, slotspace+7, read32_delegate(FUNC(nubus_image_device::image_status_r), this), write32_delegate(FUNC(nubus_image_device::image_status_w), this));
	m_nubus->install_device(slotspace+8, slotspace+11, read32_delegate(FUNC(nubus_image_device::file_cmd_r), this), write32_delegate(FUNC(nubus_image_device::file_cmd_w), this));
	m_nubus->install_device(slotspace+12, slotspace+15, read32_delegate(FUNC(nubus_image_device::file_data_r), this), write32_delegate(FUNC(nubus_image_device::file_data_w), this));
	m_nubus->install_device(slotspace+16, slotspace+19, read32_delegate(FUNC(nubus_image_device::file_len_r), this), write32_delegate(FUNC(nubus_image_device::file_len_w), this));
	m_nubus->install_device(slotspace+20, slotspace+147, read32_delegate(FUNC(nubus_image_device::file_name_r), this), write32_delegate(FUNC(nubus_image_device::file_name_w), this));
	m_nubus->install_device(superslotspace, superslotspace+((256*1024*1024)-1), read32_delegate(FUNC(nubus_image_device::image_super_r), this), write32_delegate(FUNC(nubus_image_device::image_super_w), this));

	m_image = subdevice<messimg_disk_image_device>(IMAGE_DISK0_TAG);

	filectx.curdir[0] = '.';
	filectx.curdir[1] = '\0';
	filectx.dirp = nullptr;
	filectx.fd = nullptr;
}

开发者ID:BenjaminSiskoo，项目名称:mame，代码行数:29，代码来源:nubus_image.cpp

示例9: set_nubus_device

void nubus_cb264_device::device_start()
{
    UINT32 slotspace;

    // set_nubus_device makes m_slot valid
    set_nubus_device();
    install_declaration_rom(this, CB264_ROM_REGION);

    slotspace = get_slotspace();

//  printf("[cb264 %p] slotspace = %x\n", this, slotspace);

    m_vram.resize(VRAM_SIZE);
    install_bank(slotspace, slotspace+VRAM_SIZE-1, 0, 0, "bank_cb264", m_vram);

    m_nubus->install_device(slotspace+0xff6000, slotspace+0xff60ff, read32_delegate(FUNC(nubus_cb264_device::cb264_r), this), write32_delegate(FUNC(nubus_cb264_device::cb264_w), this));
    m_nubus->install_device(slotspace+0xff7000, slotspace+0xff70ff, read32_delegate(FUNC(nubus_cb264_device::cb264_ramdac_r), this), write32_delegate(FUNC(nubus_cb264_device::cb264_ramdac_w), this));
}

开发者ID:hstampfl，项目名称:mame，代码行数:18，代码来源:nubus_cb264.c

示例10: read8_delegate

void southbridge_device::device_start()
{
	spaceio = &machine().device(":maincpu")->memory().space(AS_IO);

	spaceio->install_readwrite_handler(0x0000, 0x001f, read8_delegate(FUNC(am9517a_device::read), &(*m_dma8237_1)), write8_delegate(FUNC(am9517a_device::write), &(*m_dma8237_1)), 0xffffffff);
	spaceio->install_readwrite_handler(0x0020, 0x003f, read8_delegate(FUNC(pic8259_device::read), &(*m_pic8259_master)), write8_delegate(FUNC(pic8259_device::write), &(*m_pic8259_master)), 0xffffffff);
	spaceio->install_readwrite_handler(0x0040, 0x005f, read8_delegate(FUNC(pit8254_device::read), &(*m_pit8254)), write8_delegate(FUNC(pit8254_device::write), &(*m_pit8254)), 0xffffffff);
	spaceio->install_readwrite_handler(0x0060, 0x0063, read8_delegate(FUNC(southbridge_device::at_portb_r), this), write8_delegate(FUNC(southbridge_device::at_portb_w), this), 0x0000ff00);
	spaceio->install_readwrite_handler(0x0080, 0x009f, read8_delegate(FUNC(southbridge_device::at_page8_r), this), write8_delegate(FUNC(southbridge_device::at_page8_w), this), 0xffffffff);
	spaceio->install_readwrite_handler(0x00a0, 0x00bf, read8_delegate(FUNC(pic8259_device::read), &(*m_pic8259_slave)), write8_delegate(FUNC(pic8259_device::write), &(*m_pic8259_slave)), 0xffffffff);
	spaceio->install_readwrite_handler(0x00c0, 0x00df, read8_delegate(FUNC(southbridge_device::at_dma8237_2_r), this), write8_delegate(FUNC(southbridge_device::at_dma8237_2_w), this), 0xffffffff);
	spaceio->install_readwrite_handler(0x0170, 0x0177, read32_delegate(FUNC(southbridge_device::ide2_read32_cs0_r), this), write32_delegate(FUNC(southbridge_device::ide2_write32_cs0_w), this), 0xffffffff);
	spaceio->install_readwrite_handler(0x01f0, 0x01f7, read32_delegate(FUNC(southbridge_device::ide1_read32_cs0_r), this), write32_delegate(FUNC(southbridge_device::ide1_write32_cs0_w), this), 0xffffffff);
	spaceio->install_readwrite_handler(0x0374, 0x0377, read8_delegate(FUNC(southbridge_device::ide2_read_cs1_r), this), write8_delegate(FUNC(southbridge_device::ide2_write_cs1_w), this), 0xff0000);
	spaceio->install_readwrite_handler(0x03f4, 0x03f7, read8_delegate(FUNC(southbridge_device::ide1_read_cs1_r), this), write8_delegate(FUNC(southbridge_device::ide1_write_cs1_w), this), 0xff0000);
	spaceio->install_readwrite_handler(0x04d0, 0x04d3, read8_delegate(FUNC(southbridge_device::eisa_irq_read), this), write8_delegate(FUNC(southbridge_device::eisa_irq_write), this), 0x0000ffff);
	spaceio->nop_readwrite(0x00e0, 0x00ef);
}

开发者ID:RafTacker，项目名称:mame，代码行数:18，代码来源:southbridge.cpp

示例11: install_declaration_rom

void nubus_quadralink_device::device_start()
{
	uint32_t slotspace;

	install_declaration_rom(this, QUADRALINK_ROM_REGION);

	slotspace = get_slotspace();

	nubus().install_device(slotspace, slotspace+0xefffff, read32_delegate(FUNC(nubus_quadralink_device::dev_r), this), write32_delegate(FUNC(nubus_quadralink_device::dev_w), this));
}

开发者ID:system11b，项目名称:mame，代码行数:10，代码来源:quadralink.cpp

示例12: install_declaration_rom

void nubus_xceed30hr_device::device_start()
{
	uint32_t slotspace;

	install_declaration_rom(this, XCEED30HR_ROM_REGION);

	slotspace = get_slotspace();

//  printf("[xceed30hr %p] slotspace = %x\n", this, slotspace);

	m_vram.resize(VRAM_SIZE);
	m_vram32 = (uint32_t *)&m_vram[0];

	nubus().install_device(slotspace, slotspace+VRAM_SIZE-1, read32_delegate(FUNC(nubus_xceed30hr_device::vram_r), this), write32_delegate(FUNC(nubus_xceed30hr_device::vram_w), this));
	nubus().install_device(slotspace+0x800000, slotspace+0xefffff, read32_delegate(FUNC(nubus_xceed30hr_device::xceed30hr_r), this), write32_delegate(FUNC(nubus_xceed30hr_device::xceed30hr_w), this));

	m_timer = timer_alloc(0, nullptr);
	m_timer->adjust(screen().time_until_pos(479, 0), 0);
}

开发者ID:Dagarman，项目名称:mame，代码行数:19，代码来源:pds30_30hr.cpp

示例13: set_nubus_device

void nubus_vikbw_device::device_start()
{
	uint32_t slotspace;

	// set_nubus_device makes m_slot valid
	set_nubus_device();
	install_declaration_rom(this, VIKBW_ROM_REGION, true);

	slotspace = get_slotspace();

//  printf("[vikbw %p] slotspace = %x\n", this, slotspace);

	m_vram.resize(VRAM_SIZE);
	install_bank(slotspace+0x40000, slotspace+0x40000+VRAM_SIZE-1, "bank_vikbw", &m_vram[0]);
	install_bank(slotspace+0x940000, slotspace+0x940000+VRAM_SIZE-1, "bank_vikbw2", &m_vram[0]);

	m_nubus->install_device(slotspace, slotspace+3, read32_delegate(FUNC(nubus_vikbw_device::viking_enable_r), this), write32_delegate(FUNC(nubus_vikbw_device::viking_disable_w), this));
	m_nubus->install_device(slotspace+0x80000, slotspace+0x80000+3, read32_delegate(FUNC(nubus_vikbw_device::viking_ack_r), this), write32_delegate(FUNC(nubus_vikbw_device::viking_ack_w), this));
}

开发者ID:Enverex，项目名称:mame，代码行数:19，代码来源:nubus_vikbw.cpp

示例14: install_declaration_rom

void nubus_bootbug_device::device_start()
{
	uint32_t slotspace;

	install_declaration_rom(this, BOOTBUG_ROM_REGION);

	slotspace = get_slotspace();

	nubus().install_device(slotspace, slotspace+0xff, read32_delegate(FUNC(nubus_bootbug_device::dev_r), this), write32_delegate(FUNC(nubus_bootbug_device::dev_w), this));
}

开发者ID:RafTacker，项目名称:mame，代码行数:10，代码来源:bootbug.cpp

示例15: install_declaration_rom

void nubus_lview_device::device_start()
{
	uint32_t slotspace;

	install_declaration_rom(this, LVIEW_ROM_REGION);

	slotspace = get_slotspace();

//  printf("[lview %p] slotspace = %x\n", this, slotspace);

	m_vram.resize(VRAM_SIZE);
	m_vram32 = (uint32_t *)&m_vram[0];

	nubus().install_device(slotspace, slotspace+VRAM_SIZE-1, read32_delegate(FUNC(nubus_lview_device::vram_r), this), write32_delegate(FUNC(nubus_lview_device::vram_w), this));
	nubus().install_device(slotspace+0x900000, slotspace+VRAM_SIZE-1+0x900000, read32_delegate(FUNC(nubus_lview_device::vram_r), this), write32_delegate(FUNC(nubus_lview_device::vram_w), this));
	nubus().install_device(slotspace+0xb0000, slotspace+0xbffff, read32_delegate(FUNC(nubus_lview_device::lview_r), this), write32_delegate(FUNC(nubus_lview_device::lview_w), this));

	m_timer = timer_alloc(0, nullptr);
	m_timer->adjust(screen().time_until_pos(599, 0), 0);
}

开发者ID:system11b，项目名称:mame，代码行数:20，代码来源:pds30_sigmalview.cpp

示例16: install_declaration_rom

void nubus_procolor816_device::device_start()
{
	uint32_t slotspace;

	install_declaration_rom(this, PROCOLOR816_ROM_REGION);

	slotspace = get_slotspace();

//  printf("[procolor816 %p] slotspace = %x\n", this, slotspace);

	m_vram.resize(VRAM_SIZE);
	m_vram32 = (uint32_t *)&m_vram[0];

	nubus().install_device(slotspace, slotspace+VRAM_SIZE-1, read32_delegate(FUNC(nubus_procolor816_device::vram_r), this), write32_delegate(FUNC(nubus_procolor816_device::vram_w), this));
	nubus().install_device(slotspace+0x900000, slotspace+VRAM_SIZE-1+0x900000, read32_delegate(FUNC(nubus_procolor816_device::vram_r), this), write32_delegate(FUNC(nubus_procolor816_device::vram_w), this));
	nubus().install_device(slotspace+0xf00000, slotspace+0xff7fff, read32_delegate(FUNC(nubus_procolor816_device::procolor816_r), this), write32_delegate(FUNC(nubus_procolor816_device::procolor816_w), this));

	m_timer = timer_alloc(0, nullptr);
	m_timer->adjust(screen().time_until_pos(479, 0), 0);
}

开发者ID:system11b，项目名称:mame，代码行数:20，代码来源:pds30_procolor816.cpp

示例17: machine

void southbridge_device::device_start()
{
	address_space& spaceio = machine().device(":maincpu")->memory().space(AS_IO);

	spaceio.install_readwrite_handler(0x0000, 0x001f, read8_delegate(FUNC(am9517a_device::read),&(*m_dma8237_1)), write8_delegate(FUNC(am9517a_device::write),&(*m_dma8237_1)), 0xffffffff);
	spaceio.install_readwrite_handler(0x0020, 0x003f, read8_delegate(FUNC(pic8259_device::read),&(*m_pic8259_master)), write8_delegate(FUNC(pic8259_device::write),&(*m_pic8259_master)), 0xffffffff);
	spaceio.install_readwrite_handler(0x0040, 0x005f, read8_delegate(FUNC(pit8254_device::read),&(*m_pit8254)), write8_delegate(FUNC(pit8254_device::write),&(*m_pit8254)), 0xffffffff);
	spaceio.install_readwrite_handler(0x0060, 0x0063, read8_delegate(FUNC(southbridge_device::at_portb_r), this), write8_delegate(FUNC(southbridge_device::at_portb_w), this), 0x0000ff00);
	spaceio.install_readwrite_handler(0x0080, 0x009f, read8_delegate(FUNC(southbridge_device::at_page8_r),this), write8_delegate(FUNC(southbridge_device::at_page8_w),this), 0xffffffff);
	spaceio.install_readwrite_handler(0x00a0, 0x00bf, read8_delegate(FUNC(pic8259_device::read),&(*m_pic8259_slave)), write8_delegate(FUNC(pic8259_device::write),&(*m_pic8259_slave)), 0xffffffff);
	spaceio.install_readwrite_handler(0x00c0, 0x00df, read8_delegate(FUNC(southbridge_device::at_dma8237_2_r),this), write8_delegate(FUNC(southbridge_device::at_dma8237_2_w),this), 0xffffffff);
	spaceio.install_readwrite_handler(0x0170, 0x0177, read32_delegate(FUNC(bus_master_ide_controller_device::read_cs0),&(*m_ide2)), write32_delegate(FUNC(bus_master_ide_controller_device::write_cs0), &(*m_ide2)),0xffffffff);
	spaceio.install_readwrite_handler(0x01f0, 0x01f7, read32_delegate(FUNC(bus_master_ide_controller_device::read_cs0),&(*m_ide)), write32_delegate(FUNC(bus_master_ide_controller_device::write_cs0), &(*m_ide)),0xffffffff);
//  HACK: this works if you take out the (non working) fdc
//  spaceio.install_readwrite_handler(0x0370, 0x0377, read32_delegate(FUNC(bus_master_ide_controller_device::read_cs1),&(*m_ide2)), write32_delegate(FUNC(bus_master_ide_controller_device::write_cs1), &(*m_ide2)),0xffffffff);
//  spaceio.install_readwrite_handler(0x03f0, 0x03f7, read32_delegate(FUNC(bus_master_ide_controller_device::read_cs1),&(*m_ide)), write32_delegate(FUNC(bus_master_ide_controller_device::write_cs1), &(*m_ide)),0xffffffff);
	spaceio.install_readwrite_handler(0x0374, 0x0377, read8_delegate(FUNC(southbridge_device::ide2_read_cs1_r),this), write8_delegate(FUNC(southbridge_device::ide2_write_cs1_w), this),0xff0000);
	spaceio.install_readwrite_handler(0x03f4, 0x03f7, read8_delegate(FUNC(southbridge_device::ide_read_cs1_r),this), write8_delegate(FUNC(southbridge_device::ide_write_cs1_w), this),0xff0000);
	spaceio.nop_readwrite(0x00e0, 0x00ef);
}

开发者ID:system11b，项目名称:mame，代码行数:20，代码来源:southbridge.cpp

示例18: set_nubus_device

void nubus_image_device::device_start()
{
	UINT32 slotspace;
	UINT32 superslotspace;

	// set_nubus_device makes m_slot valid
	set_nubus_device();
	install_declaration_rom(this, IMAGE_ROM_REGION);

	slotspace = get_slotspace();
	superslotspace = get_super_slotspace();

//  printf("[image %p] slotspace = %x, super = %x\n", this, slotspace, superslotspace);

	m_nubus->install_device(slotspace, slotspace+3, read32_delegate(FUNC(nubus_image_device::image_r), this), write32_delegate(FUNC(nubus_image_device::image_w), this));
	m_nubus->install_device(slotspace+4, slotspace+7, read32_delegate(FUNC(nubus_image_device::image_status_r), this), write32_delegate(FUNC(nubus_image_device::image_status_w), this));
	m_nubus->install_device(superslotspace, superslotspace+((256*1024*1024)-1), read32_delegate(FUNC(nubus_image_device::image_super_r), this), write32_delegate(FUNC(nubus_image_device::image_super_w), this));

	m_image = subdevice<messimg_disk_image_device>(IMAGE_DISK0_TAG);
}

开发者ID:crazii，项目名称:mameplus，代码行数:20，代码来源:nubus_image.c

示例19: install_declaration_rom

void nubus_m2video_device::device_start()
{
	uint32_t slotspace;

	install_declaration_rom(this, M2VIDEO_ROM_REGION, true, true);

	slotspace = get_slotspace();

//  logerror("[m2video %p] slotspace = %x\n", this, slotspace);

	m_vram.resize(VRAM_SIZE);
	m_vram32 = (uint32_t *)&m_vram[0];

	nubus().install_device(slotspace, slotspace+VRAM_SIZE-1, read32_delegate(FUNC(nubus_m2video_device::vram_r), this), write32_delegate(FUNC(nubus_m2video_device::vram_w), this));
	nubus().install_device(slotspace+0x900000, slotspace+VRAM_SIZE-1+0x900000, read32_delegate(FUNC(nubus_m2video_device::vram_r), this), write32_delegate(FUNC(nubus_m2video_device::vram_w), this));
	nubus().install_device(slotspace+0x80000, slotspace+0xeffff, read32_delegate(FUNC(nubus_m2video_device::m2video_r), this), write32_delegate(FUNC(nubus_m2video_device::m2video_w), this));

	m_timer = timer_alloc(0, nullptr);
	m_timer->adjust(screen().time_until_pos(479, 0), 0);
}

开发者ID:Dagarman，项目名称:mame，代码行数:20，代码来源:nubus_m2video.cpp

示例20: set_nubus_device

void nubus_specpdq_device::device_start()
{
	UINT32 slotspace;

	// set_nubus_device makes m_slot valid
	set_nubus_device();
	install_declaration_rom(this, SPECPDQ_ROM_REGION);

	slotspace = get_slotspace();

//  printf("[specpdq %p] slotspace = %x\n", this, slotspace);

	m_vram.resize(VRAM_SIZE);
	m_vram32 = (UINT32 *)&m_vram[0];
	m_nubus->install_device(slotspace, slotspace+VRAM_SIZE-1, read32_delegate(FUNC(nubus_specpdq_device::vram_r), this), write32_delegate(FUNC(nubus_specpdq_device::vram_w), this));
	m_nubus->install_device(slotspace+0x400000, slotspace+0xfbffff, read32_delegate(FUNC(nubus_specpdq_device::specpdq_r), this), write32_delegate(FUNC(nubus_specpdq_device::specpdq_w), this));

	m_timer = timer_alloc(0, NULL);
	m_timer->adjust(m_screen->time_until_pos(843, 0), 0);
}

开发者ID:BrandoCommando，项目名称:mame，代码行数:20，代码来源:nubus_specpdq.c

注：本文中的read32_delegate函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ read8函数代码示例发布时间：2022-05-30

C++ read16_delegate函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19188|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8654|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ read32_delegate函数代码示例

示例1: rand

示例2: DRIVER_INIT_MEMBER

示例3: sizeof

示例4: DRIVER_INIT_MEMBER

示例5: read32_delegate

示例6: DRIVER_INIT_MEMBER

示例7: intel82439tx_init

示例8: set_nubus_device

示例9: set_nubus_device

示例10: read8_delegate

示例11: install_declaration_rom

示例12: install_declaration_rom

示例13: set_nubus_device

示例14: install_declaration_rom

示例15: install_declaration_rom

示例16: install_declaration_rom

示例17: machine

示例18: set_nubus_device

示例19: install_declaration_rom

示例20: set_nubus_device

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-22982

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053