C++ rdusp函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rdusp函数的典型用法代码示例。如果您正苦于以下问题：C++ rdusp函数的具体用法？C++ rdusp怎么用？C++ rdusp使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rdusp函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: sys_rt_sigreturn

asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
                                long mof, long srp, struct pt_regs *regs)
{
	struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
	sigset_t set;

        if (((long)frame) & 3)
                goto badframe;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
		goto badframe;

	sigdelsetmask(&set, ~_BLOCKABLE);
	spin_lock_irq(&current->sighand->siglock);
	current->blocked = set;
	recalc_sigpending();
	spin_unlock_irq(&current->sighand->siglock);

	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
		goto badframe;

	if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
		goto badframe;

	return regs->r10;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:32，代码来源:signal.c

示例2: sys_rt_sigreturn

asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
                                long mof, long srp, struct pt_regs *regs)
{
	struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
	sigset_t set;

        /*
         * Since we stacked the signal on a dword boundary,
         * then frame should be dword aligned here.  If it's
         * not, then the user is trying to mess with us.
         */
        if (((long)frame) & 3)
                goto badframe;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
		goto badframe;

	set_current_blocked(&set);

	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
		goto badframe;

	if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
		goto badframe;

	return regs->r10;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:4atty，项目名称:linux，代码行数:33，代码来源:signal.c

示例3: dump_thread

/*
 * Fill in the user structure for an ECOFF core dump.
 */
void
dump_thread(struct pt_regs * pt, struct user * dump)
{
	/* switch stack follows right below pt_regs: */
	struct switch_stack * sw = ((struct switch_stack *) pt) - 1;

	dump->magic = CMAGIC;
	dump->start_code  = current->mm->start_code;
	dump->start_data  = current->mm->start_data;
	dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
	dump->u_tsize = ((current->mm->end_code - dump->start_code)
			 >> PAGE_SHIFT);
	dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data)
			 >> PAGE_SHIFT);
	dump->u_ssize = (current->mm->start_stack - dump->start_stack
			 + PAGE_SIZE-1) >> PAGE_SHIFT;

	/*
	 * We store the registers in an order/format that is
	 * compatible with DEC Unix/OSF/1 as this makes life easier
	 * for gdb.
	 */
	dump->regs[EF_V0]  = pt->r0;
	dump->regs[EF_T0]  = pt->r1;
	dump->regs[EF_T1]  = pt->r2;
	dump->regs[EF_T2]  = pt->r3;
	dump->regs[EF_T3]  = pt->r4;
	dump->regs[EF_T4]  = pt->r5;
	dump->regs[EF_T5]  = pt->r6;
	dump->regs[EF_T6]  = pt->r7;
	dump->regs[EF_T7]  = pt->r8;
	dump->regs[EF_S0]  = sw->r9;
	dump->regs[EF_S1]  = sw->r10;
	dump->regs[EF_S2]  = sw->r11;
	dump->regs[EF_S3]  = sw->r12;
	dump->regs[EF_S4]  = sw->r13;
	dump->regs[EF_S5]  = sw->r14;
	dump->regs[EF_S6]  = sw->r15;
	dump->regs[EF_A3]  = pt->r19;
	dump->regs[EF_A4]  = pt->r20;
	dump->regs[EF_A5]  = pt->r21;
	dump->regs[EF_T8]  = pt->r22;
	dump->regs[EF_T9]  = pt->r23;
	dump->regs[EF_T10] = pt->r24;
	dump->regs[EF_T11] = pt->r25;
	dump->regs[EF_RA]  = pt->r26;
	dump->regs[EF_T12] = pt->r27;
	dump->regs[EF_AT]  = pt->r28;
	dump->regs[EF_SP]  = rdusp();
	dump->regs[EF_PS]  = pt->ps;
	dump->regs[EF_PC]  = pt->pc;
	dump->regs[EF_GP]  = pt->gp;
	dump->regs[EF_A0]  = pt->r16;
	dump->regs[EF_A1]  = pt->r17;
	dump->regs[EF_A2]  = pt->r18;
	memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
}

开发者ID:12019，项目名称:hg556a_source，代码行数:60，代码来源:process.c

示例4: sys_sigreturn

asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
                             long srp, struct pt_regs *regs)
{
	struct sigframe __user *frame = (struct sigframe *)rdusp();
	sigset_t set;

        if (((long)frame) & 3)
                goto badframe;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__get_user(set.sig[0], &frame->sc.oldmask)
	    || (_NSIG_WORDS > 1
		&& __copy_from_user(&set.sig[1], frame->extramask,
				    sizeof(frame->extramask))))
		goto badframe;

	sigdelsetmask(&set, ~_BLOCKABLE);
	spin_lock_irq(&current->sighand->siglock);
	current->blocked = set;
	recalc_sigpending();
	spin_unlock_irq(&current->sighand->siglock);

	if (restore_sigcontext(regs, &frame->sc))
		goto badframe;

	

	return regs->r10;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:34，代码来源:signal.c

示例5: vmadump_store_cpu

long vmadump_store_cpu(struct vmadump_map_ctx *ctx, struct file *file,
		       struct pt_regs *regs) {
    struct switch_stack *ss;
    unsigned long usp;
    long bytes = 0, r;

    /* Store struct pt_regs */
    r = write_kern(ctx, file, regs, sizeof(*regs));
    if (r != sizeof(*regs)) goto err;
    bytes += r;

    /* Alpha has more registers than what's in struct ptregs to save
     * The 'switch_stack' structure contains the rest of the integer
     * registers and the floating point registers.  Then we still have
     * to go after the user's stack pointer via the PAL code. */
    /* Some pointer voodoo... the switch_stack structure got
     * pushed on top of the struct pt_regs.. */
    ss = ((struct switch_stack *) regs)-1;
    usp = rdusp();

    r = write_kern(ctx, file, ss, sizeof(*ss));
    if (r != sizeof(*ss)) goto err;
    bytes += r;

    r = write_kern(ctx, file, &usp, sizeof(usp));
    if (r != sizeof(usp)) goto err;
    bytes += r;
    return bytes;

 err:
    if (r >= 0) r = -EIO;
    return r;
}

开发者ID:rminnich，项目名称:clustermatic，代码行数:33，代码来源:vmadump_alpha.c

示例6: do_rt_sigreturn

asmlinkage int do_rt_sigreturn(unsigned long __unused)
{
	struct pt_regs *regs = (struct pt_regs *)__unused;
	unsigned long usp = rdusp();
	struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
	sigset_t set;
	int r0;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
		goto badframe;

	sigdelsetmask(&set, ~_BLOCKABLE);
	set_current_blocked(&set);

	if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
		goto badframe;

	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->usp) == -EFAULT)
		goto badframe;

	return r0;

 badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:Korn1699，项目名称:linux，代码行数:28，代码来源:signal.c

示例7: do_rt_sigreturn

asmlinkage int do_rt_sigreturn(unsigned long __unused,...)
{
	struct pt_regs *regs = (struct pt_regs *) &__unused;
	unsigned long usp = rdusp();
	struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
	sigset_t set;
	int er0;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
		goto badframe;

	sigdelsetmask(&set, ~_BLOCKABLE);
	spin_unlock_irq(&current->sighand->siglock);
	current->blocked = set;
	recalc_sigpending();
	spin_lock_irq(&current->sighand->siglock);
	
	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &er0))
		goto badframe;

	if (do_sigaltstack(&frame->uc.uc_stack, NULL, usp) == -EFAULT)
		goto badframe;

	return er0;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:kzlin129，项目名称:tt-gpl，代码行数:31，代码来源:signal.c

示例8: do_sigreturn

asmlinkage int do_sigreturn(unsigned long __unused,...)
{
	struct pt_regs *regs = (struct pt_regs *) (&__unused - 1);
	unsigned long usp = rdusp();
	struct sigframe *frame = (struct sigframe *)(usp - 4);
	sigset_t set;
	int er0;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
	    (_NSIG_WORDS > 1 &&
	     __copy_from_user(&set.sig[1], &frame->extramask,
			      sizeof(frame->extramask))))
		goto badframe;

	sigdelsetmask(&set, ~_BLOCKABLE);
	spin_lock_irq(&current->sighand->siglock);
	current->blocked = set;
	recalc_sigpending();
	spin_unlock_irq(&current->sighand->siglock);
	
	if (restore_sigcontext(regs, &frame->sc, &er0))
		goto badframe;
	return er0;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:kzlin129，项目名称:tt-gpl，代码行数:30，代码来源:signal.c

示例9: alpha_clone

/*
 * "alpha_clone()".. By the time we get here, the
 * non-volatile registers have also been saved on the
 * stack. We do some ugly pointer stuff here.. (see
 * also copy_thread)
 *
 * Notice that "fork()" is implemented in terms of clone,
 * with parameters (SIGCHLD, 0).
 */
int alpha_clone(unsigned long clone_flags, unsigned long usp,
	struct switch_stack * swstack)
{
	if (!usp)
		usp = rdusp();
	return do_fork(clone_flags, usp, (struct pt_regs *) (swstack+1));
}

开发者ID:liexusong，项目名称:linux2.0-comment，代码行数:16，代码来源:process.c

示例10: sys_sigreturn

asmlinkage int sys_sigreturn(void)
{
	struct pt_regs *regs = current_pt_regs();
	struct sigframe __user *frame = (struct sigframe *)rdusp();
	sigset_t set;

        /*
         * Since we stacked the signal on a dword boundary,
         * then frame should be dword aligned here.  If it's
         * not, then the user is trying to mess with us.
         */
        if (((long)frame) & 3)
                goto badframe;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__get_user(set.sig[0], &frame->sc.oldmask)
	    || (_NSIG_WORDS > 1
		&& __copy_from_user(&set.sig[1], frame->extramask,
				    sizeof(frame->extramask))))
		goto badframe;

	set_current_blocked(&set);

	if (restore_sigcontext(regs, &frame->sc))
		goto badframe;

	/* TODO: SIGTRAP when single-stepping as in arm ? */

	return regs->r10;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:35，代码来源:signal.c

示例11: sys_rt_sigreturn

asmlinkage int sys_rt_sigreturn(void)
{
	unsigned long usp = rdusp();
	struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
	sigset_t set;
	int er0;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
		goto badframe;

	set_current_blocked(&set);

	if (restore_sigcontext(&frame->uc.uc_mcontext, &er0))
		goto badframe;

	if (restore_altstack(&frame->uc.uc_stack))
		goto badframe;

	return er0;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:26，代码来源:signal.c

示例12: rt_setup_sigcontext

static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs)
{
	int err = 0;

#define SETUP(x) err |= __put_user(regs->x, &sc->sc_##x)

	SETUP(r0); SETUP(r1); SETUP(r2); SETUP(r3);
	SETUP(r4); SETUP(r5); SETUP(r6); SETUP(r7);
	SETUP(p0); SETUP(p1); SETUP(p2); SETUP(p3);
	SETUP(p4); SETUP(p5);
	err |= __put_user(rdusp(), &sc->sc_usp);
	SETUP(a0w); SETUP(a1w);
	SETUP(a0x); SETUP(a1x);
	SETUP(astat);
	SETUP(rets);
	SETUP(pc);
	SETUP(retx);
	SETUP(fp);
	SETUP(i0); SETUP(i1); SETUP(i2); SETUP(i3);
	SETUP(m0); SETUP(m1); SETUP(m2); SETUP(m3);
	SETUP(l0); SETUP(l1); SETUP(l2); SETUP(l3);
	SETUP(b0); SETUP(b1); SETUP(b2); SETUP(b3);
	SETUP(lc0); SETUP(lc1);
	SETUP(lt0); SETUP(lt1);
	SETUP(lb0); SETUP(lb1);
	SETUP(seqstat);

	return err;
}

开发者ID:Korn1699，项目名称:linux，代码行数:29，代码来源:signal.c

示例13: do_sigreturn

asmlinkage int do_sigreturn(unsigned long __unused,...)
{
	struct pt_regs *regs = (struct pt_regs *) (&__unused - 1);
	unsigned long usp = rdusp();
	struct sigframe *frame = (struct sigframe *)(usp - 4);
	sigset_t set;
	int er0;

	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
		goto badframe;
	if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
	    (_NSIG_WORDS > 1 &&
	     __copy_from_user(&set.sig[1], &frame->extramask,
			      sizeof(frame->extramask))))
		goto badframe;

	set_current_blocked(&set);
	
	if (restore_sigcontext(regs, &frame->sc, &er0))
		goto badframe;
	return er0;

badframe:
	force_sig(SIGSEGV, current);
	return 0;
}

开发者ID:7L，项目名称:pi_plus，代码行数:26，代码来源:signal.c

示例14: sys_clone

/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
asmlinkage int sys_clone(unsigned long newusp, unsigned long flags,
                         int* parent_tid, int* child_tid, long mof, long srp,
                         struct pt_regs *regs)
{
    if (!newusp)
        newusp = rdusp();
    return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:9，代码来源:process.c

示例15: setup_frame

static void
setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
            struct pt_regs *regs, struct switch_stack * sw)
{
    unsigned long oldsp, r26, err = 0;
    struct sigframe *frame;

    oldsp = rdusp();
    frame = get_sigframe(ka, oldsp, sizeof(*frame));
    if (verify_area(VERIFY_WRITE, frame, sizeof(*frame)))
        goto give_sigsegv;

    err |= setup_sigcontext(&frame->sc, regs, sw, set->sig[0], oldsp);
    if (_NSIG_WORDS > 1) {
        err |= __copy_to_user(frame->extramask, &set->sig[1],
                              sizeof(frame->extramask));
    }
    if (err)
        goto give_sigsegv;

    /* Set up to return from userspace.  If provided, use a stub
       already in userspace.  */
    if (ka->ka_restorer) {
        r26 = (unsigned long) ka->ka_restorer;
    } else {
        err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
        err |= __put_user(INSN_LDI_R0+__NR_sigreturn, frame->retcode+1);
        err |= __put_user(INSN_CALLSYS, frame->retcode+2);
        imb();
        r26 = (unsigned long) frame->retcode;
    }

    /* Check that everything was written properly.  */
    if (err)
        goto give_sigsegv;

    /* "Return" to the handler */
    regs->r26 = r26;
    regs->r27 = regs->pc = (unsigned long) ka->sa.sa_handler;
    regs->r16 = sig;			/* a0: signal number */
    regs->r17 = 0;				/* a1: exception code */
    regs->r18 = (unsigned long) &frame->sc;	/* a2: sigcontext pointer */
    wrusp((unsigned long) frame);

#if DEBUG_SIG
    printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
           current->comm, current->pid, frame, regs->pc, regs->r26);
#endif

    return;

give_sigsegv:
    if (sig == SIGSEGV)
        ka->sa.sa_handler = SIG_DFL;
    force_sig(SIGSEGV, current);
}

开发者ID:dot-Sean，项目名称:linux_kernels，代码行数:56，代码来源:signal.c

示例16: setup_rt_frame

static int
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
	       sigset_t *set, struct pt_regs *regs)
{
	unsigned long oldsp, r26, err = 0;
	struct rt_sigframe __user *frame;

	oldsp = rdusp();
	frame = get_sigframe(ka, oldsp, sizeof(*frame));
	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		return -EFAULT;

	err |= copy_siginfo_to_user(&frame->info, info);

	/* Create the ucontext.  */
	err |= __put_user(0, &frame->uc.uc_flags);
	err |= __put_user(0, &frame->uc.uc_link);
	err |= __put_user(set->sig[0], &frame->uc.uc_osf_sigmask);
	err |= __save_altstack(&frame->uc.uc_stack, oldsp);
	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, 
				set->sig[0], oldsp);
	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
	if (err)
		return -EFAULT;

	/* Set up to return from userspace.  If provided, use a stub
	   already in userspace.  */
	if (ka->ka_restorer) {
		r26 = (unsigned long) ka->ka_restorer;
	} else {
		err |= __put_user(INSN_MOV_R30_R16, frame->retcode+0);
		err |= __put_user(INSN_LDI_R0+__NR_rt_sigreturn,
				  frame->retcode+1);
		err |= __put_user(INSN_CALLSYS, frame->retcode+2);
		imb();
		r26 = (unsigned long) frame->retcode;
	}

	if (err)
		return -EFAULT;

	/* "Return" to the handler */
	regs->r26 = r26;
	regs->r27 = regs->pc = (unsigned long) ka->sa.sa_handler;
	regs->r16 = sig;			  /* a0: signal number */
	regs->r17 = (unsigned long) &frame->info; /* a1: siginfo pointer */
	regs->r18 = (unsigned long) &frame->uc;	  /* a2: ucontext pointer */
	wrusp((unsigned long) frame);

#if DEBUG_SIG
	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
		current->comm, current->pid, frame, regs->pc, regs->r26);
#endif

	return 0;
}

开发者ID:22101959，项目名称:linux-3.8.13，代码行数:56，代码来源:signal.c

示例17: alpha_clone

/*
 * "alpha_clone()".. By the time we get here, the
 * non-volatile registers have also been saved on the
 * stack. We do some ugly pointer stuff here.. (see
 * also copy_thread)
 *
 * Notice that "fork()" is implemented in terms of clone,
 * with parameters (SIGCHLD, 0).
 */
int
alpha_clone(unsigned long clone_flags, unsigned long usp,
	    int __user *parent_tid, int __user *child_tid,
	    unsigned long tls_value, struct pt_regs *regs)
{
	if (!usp)
		usp = rdusp();

	return do_fork(clone_flags, usp, regs, 0, parent_tid, child_tid);
}

开发者ID:Placeholder，项目名称:linux-galaxy，代码行数:19，代码来源:process.c

示例18: show_stack

int 
show_stack()
{
	unsigned long *sp = (unsigned long *)rdusp();
	int i;
	raw_printk("Stack dump [0x%08lx]:\n", (unsigned long)sp);
	for(i = 0; i < 16; i++)
		raw_printk("sp + %d: 0x%08lx\n", i*4, sp[i]);
	return 0;
}

开发者ID:gerboland，项目名称:linux-2.6.15-neuros-eabi，代码行数:10，代码来源:traps.c

示例19: show_regs

void show_regs(struct pt_regs *fp)
{
	char buf [150];

	printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
	printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
		(long)fp->seqstat, fp->ipend, fp->syscfg);

	decode_address(buf, fp->rete);
	printk(KERN_NOTICE " RETE: %s\n", buf);
	decode_address(buf, fp->retn);
	printk(KERN_NOTICE " RETN: %s\n", buf);
	decode_address(buf, fp->retx);
	printk(KERN_NOTICE " RETX: %s\n", buf);
	decode_address(buf, fp->rets);
	printk(KERN_NOTICE " RETS: %s\n", buf);
	decode_address(buf, fp->pc);
	printk(KERN_NOTICE " PC: %s\n", buf);

	if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
		decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
		printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
		decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
		printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
	}

	printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
	printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
		fp->r0, fp->r1, fp->r2, fp->r3);
	printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
		fp->r4, fp->r5, fp->r6, fp->r7);
	printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
		fp->p0, fp->p1, fp->p2, fp->p3);
	printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
		fp->p4, fp->p5, fp->fp, (long)fp);
	printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
		fp->lb0, fp->lt0, fp->lc0);
	printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
		fp->lb1, fp->lt1, fp->lc1);
	printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
		fp->b0, fp->l0, fp->m0, fp->i0);
	printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
		fp->b1, fp->l1, fp->m1, fp->i1);
	printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
		fp->b2, fp->l2, fp->m2, fp->i2);
	printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
		fp->b3, fp->l3, fp->m3, fp->i3);
	printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
		fp->a0w, fp->a0x, fp->a1w, fp->a1x);

	printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
		rdusp(), fp->astat);

	printk(KERN_NOTICE "\n");
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:55，代码来源:traps.c

示例20: setup_rt_frame

static int
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
	       sigset_t * set, struct pt_regs *regs)
{
	struct rt_sigframe *frame;
	int err = 0;

	frame = get_sigframe(ka, regs, sizeof(*frame));

	err |= __put_user((current_thread_info()->exec_domain
			   && current_thread_info()->exec_domain->signal_invmap
			   && sig < 32
			   ? current_thread_info()->exec_domain->
			   signal_invmap[sig] : sig), &frame->sig);

	err |= __put_user(&frame->info, &frame->pinfo);
	err |= __put_user(&frame->uc, &frame->puc);
	err |= copy_siginfo_to_user(&frame->info, info);

	/* Create the ucontext.  */
	err |= __put_user(0, &frame->uc.uc_flags);
	err |= __put_user(0, &frame->uc.uc_link);
	err |=
	    __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
	err |= __put_user(sas_ss_flags(rdusp()), &frame->uc.uc_stack.ss_flags);
	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
	err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs);
	err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));

	if (err)
		goto give_sigsegv;

	/* Set up registers for signal handler */
	wrusp((unsigned long)frame);
	if (current->personality & FDPIC_FUNCPTRS) {
		struct fdpic_func_descriptor __user *funcptr =
			(struct fdpic_func_descriptor *) ka->sa.sa_handler;
		__get_user(regs->pc, &funcptr->text);
		__get_user(regs->p3, &funcptr->GOT);
	} else
		regs->pc = (unsigned long)ka->sa.sa_handler;
	regs->rets = SIGRETURN_STUB;

	regs->r0 = frame->sig;
	regs->r1 = (unsigned long)(&frame->info);
	regs->r2 = (unsigned long)(&frame->uc);

	return 0;

 give_sigsegv:
	if (sig == SIGSEGV)
		ka->sa.sa_handler = SIG_DFL;
	force_sig(SIGSEGV, current);
	return -EFAULT;
}

开发者ID:robcore，项目名称:machinex，代码行数:55，代码来源:signal.c

注：本文中的rdusp函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ re函数代码示例发布时间：2022-05-30

C++ rdtscll函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19188|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8325|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8654|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rdusp函数代码示例

示例1: sys_rt_sigreturn

示例2: sys_rt_sigreturn

示例3: dump_thread

示例4: sys_sigreturn

示例5: vmadump_store_cpu

示例6: do_rt_sigreturn

示例7: do_rt_sigreturn

示例8: do_sigreturn

示例9: alpha_clone

示例10: sys_sigreturn

示例11: sys_rt_sigreturn

示例12: rt_setup_sigcontext

示例13: do_sigreturn

示例14: sys_clone

示例15: setup_frame

示例16: setup_rt_frame

示例17: alpha_clone

示例18: show_stack

示例19: show_regs

示例20: setup_rt_frame

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-22982

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053