C++ rdma_disconnect函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rdma_disconnect函数的典型用法代码示例。如果您正苦于以下问题：C++ rdma_disconnect函数的具体用法？C++ rdma_disconnect怎么用？C++ rdma_disconnect使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rdma_disconnect函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rdma_disconnect

RDMAServerSocket::~RDMAServerSocket() {
  running = false;
  for (auto &&id : ids) {
    rdma_disconnect(id.get());
  }
  rdma_disconnect(id.get());
  // should cause an event to be fired, but doesn't.
  // use epoll w/ timeouts instead
  id.reset();
}

开发者ID:hannesweisbach，项目名称:hydra，代码行数:10，代码来源:RDMAServerSocket.cpp

示例2: fio_rdmaio_close_file

static int fio_rdmaio_close_file(struct thread_data *td, struct fio_file *f)
{
	struct rdmaio_data *rd = td->io_ops->data;
	struct ibv_send_wr *bad_wr;

	/* unregister rdma buffer */

	/*
	 * Client sends notification to the server side
	 */
	/* refer to: http://linux.die.net/man/7/rdma_cm */
	if ((rd->is_client == 1) && ((rd->rdma_protocol == FIO_RDMA_MEM_WRITE)
				     || (rd->rdma_protocol ==
					 FIO_RDMA_MEM_READ))) {
		if (ibv_post_send(rd->qp, &rd->sq_wr, &bad_wr) != 0) {
			log_err("fio: ibv_post_send fail");
			return 1;
		}

		dprint(FD_IO, "fio: close information sent success\n");
		rdma_poll_wait(td, IBV_WC_SEND);
	}

	if (rd->is_client == 1)
		rdma_disconnect(rd->cm_id);
	else {
		rdma_disconnect(rd->child_cm_id);
#if 0
		rdma_disconnect(rd->cm_id);
#endif
	}

#if 0
	if (get_next_channel_event(td, rd->cm_channel, RDMA_CM_EVENT_DISCONNECTED) != 0) {
		log_err("fio: wait for RDMA_CM_EVENT_DISCONNECTED\n");
		return 1;
	}
#endif

	ibv_destroy_cq(rd->cq);
	ibv_destroy_qp(rd->qp);

	if (rd->is_client == 1)
		rdma_destroy_id(rd->cm_id);
	else {
		rdma_destroy_id(rd->child_cm_id);
		rdma_destroy_id(rd->cm_id);
	}

	ibv_destroy_comp_channel(rd->channel);
	ibv_dealloc_pd(rd->pd);

	return 0;
}

开发者ID:DebashisGanguly，项目名称:FIOBenchmark，代码行数:54，代码来源:rdma.c

示例3: client_disconnect

void client_disconnect(void){

    struct rdma_event_channel *ec = s_ctx->ec;
    struct rdma_cm_id *id = s_ctx->id;
    struct rdma_cm_event *event = NULL;
    struct timeval start, end, dt;

        gettimeofday(&start, NULL);
        printf("ready to disconnect\n");
        rdma_disconnect(id);
        printf("send disconnect\n");
        gettimeofday(&end, NULL);
        timersub(&end, &start, &dt); 
        long usec = dt.tv_usec + 1000000 * dt.tv_sec;
        printf("[rdma_disconnect] takes %ld micro_secs.\n", usec);

    while(1){
        if(rdma_get_cm_event(ec, &event) == 0) {
            struct rdma_cm_event event_copy;
            memcpy(&event_copy, event, sizeof(*event));
            rdma_ack_cm_event(event);
    
            if (event_copy.event == RDMA_CM_EVENT_DISCONNECTED){
                on_disconnect(event_copy.id);
                rdma_destroy_event_channel(ec);
                break;
            }
        }
    
    }

  return;

}

开发者ID:xiansl，项目名称:mytests，代码行数:34，代码来源:client1.c

示例4: isert_conn_disconnect

void isert_conn_disconnect(struct isert_connection *isert_conn)
{
	int err = rdma_disconnect(isert_conn->cm_id);

	if (unlikely(err))
		pr_err("Failed to rdma disconnect, err:%d\n", err);
}

开发者ID:christopherdion，项目名称:scst，代码行数:7，代码来源:iser_rdma.c

示例5: rping_run_server

static int rping_run_server(struct rping_cb *cb)
{
	struct ibv_recv_wr *bad_wr;
	int ret;

	ret = rping_bind_server(cb);
	if (ret)
		return ret;

	sem_wait(&cb->sem);
	if (cb->state != CONNECT_REQUEST) {
		fprintf(stderr, "wait for CONNECT_REQUEST state %d\n",
			cb->state);
		return -1;
	}

	ret = rping_setup_qp(cb, cb->child_cm_id);
	if (ret) {
		fprintf(stderr, "setup_qp failed: %d\n", ret);
		return ret;
	}

	ret = rping_setup_buffers(cb);
	if (ret) {
		fprintf(stderr, "rping_setup_buffers failed: %d\n", ret);
		goto err1;
	}

	ret = ibv_post_recv(cb->qp, &cb->rq_wr, &bad_wr);
	if (ret) {
		fprintf(stderr, "ibv_post_recv failed: %d\n", ret);
		goto err2;
	}

	pthread_create(&cb->cqthread, NULL, cq_thread, cb);

	ret = rping_accept(cb);
	if (ret) {
		fprintf(stderr, "connect error %d\n", ret);
		goto err2;
	}

	ret = rping_test_server(cb);
	if (ret) {
		fprintf(stderr, "rping server failed: %d\n", ret);
		goto err3;
	}

	ret = 0;
err3:
	rdma_disconnect(cb->child_cm_id);
	pthread_join(cb->cqthread, NULL);
	rdma_destroy_id(cb->child_cm_id);
err2:
	rping_free_buffers(cb);
err1:
	rping_free_qp(cb);

	return ret;
}

开发者ID:digideskio，项目名称:gpunet，代码行数:60，代码来源:rping.c

示例6: disconnect_conn_locked

void disconnect_conn_locked(conn_t *conn)
{
    if (conn->transport.type == CONN_TYPE_RDMA) {
        switch (conn->state) {
            case CONN_STATE_CONNECTING:
            case CONN_STATE_CONNECTED:
            case CONN_STATE_RESOLVING_ROUTE:
                conn->state = CONN_STATE_DISCONNECTING;
                if (conn->rdma.cm_id)
                    rdma_disconnect(conn->rdma.cm_id);
                break;

            case CONN_STATE_RESOLVING_ADDR:
                conn->state = CONN_STATE_DISCONNECTING;
                break;

            case CONN_STATE_DISCONNECTING:
                /* That case should not be possible because it would mean
                 * this function got called twice. */
                abort();
                break;

            case CONN_STATE_DISCONNECTED:
                break;
        }
    }
}

开发者ID:foool，项目名称:portals4，代码行数:27，代码来源:ptl_conn.c

示例7: ibw_disconnect

int ibw_disconnect(struct ibw_conn *conn)
{
	int	rc;
	struct ibw_conn_priv *pconn = talloc_get_type(conn->internal, struct ibw_conn_priv);

	DEBUG(DEBUG_DEBUG, ("ibw_disconnect: cmid=%p\n", pconn->cm_id));

	assert(pconn!=NULL);

	switch(conn->state) {
	case IBWC_ERROR:
		ibw_conn_priv_destruct(pconn); /* do this here right now */
		break;
	case IBWC_CONNECTED:
		rc = rdma_disconnect(pconn->cm_id);
		if (rc) {
			sprintf(ibw_lasterr, "ibw_disconnect failed with %d\n", rc);
			DEBUG(DEBUG_ERR, (ibw_lasterr));
			return rc;
		}
		break;
	default:
		DEBUG(DEBUG_DEBUG, ("invalid state for disconnect: %d\n", conn->state));
		break;
	}

	return 0;
}

开发者ID:DanilKorotenko，项目名称:samba，代码行数:28，代码来源:ibwrapper.c

示例8: close

        void close()
        {
            util::spinlock::scoped_lock lk(mtx_);
            if(buffer_mr_)
            {
                ibv_dereg_mr(buffer_mr_);
                buffer_mr_ = 0;
            }
            if(server_msg_mr_)
            {
                ibv_dereg_mr(server_msg_mr_);
                server_msg_mr_ = 0;
            }
            if(client_msg_mr_)
            {
                ibv_dereg_mr(client_msg_mr_);
                client_msg_mr_ = 0;
            }

            if(id_)
            {
                rdma_disconnect(id_);
                id_ = 0;
            }

            size_ = 0;
        }

开发者ID:41i，项目名称:hpx，代码行数:27，代码来源:server.hpp

示例9: closeConnections

	// closes all connections
	inline int closeConnections() {

		for (int i=0; i<threadCounter; i++) {
			while (!cqPollerThreadEnded[i])
			 	usleep(1000);
		}

		waitSendThread();
		for (unsigned int i=0; i<connections.size(); i++)
			rdma_disconnect(connections[i]->id);

		for (unsigned int i=0; i<connections.size(); i++)
			waitForEvent(connections[i]->id, RDMA_CM_EVENT_DISCONNECTED, connections[i]->getContext());

		for(unsigned i=0;i<connections.size();++i) {
			connections[i]->destroyConnection();

			delete connections[i];
			connections[i]=NULL;
		}

		for (int i=0; i<threadCounter; i++)
			free(contexts[i]);

		return 0;
	}

开发者ID:eXistence，项目名称:fastflow，代码行数:27，代码来源:ofedTransport.hpp

示例10: rdma_trans_destroy

static void
rdma_trans_destroy(void *a)
{
	Rdmatrans *rdma;
	struct ibv_qp_attr attr;

	rdma = a;
	if (rdma->connected)
		rdma_disconnect(rdma->cm_id);
	if (rdma->qp) {
		attr.qp_state = IBV_QPS_ERR;
		ibv_modify_qp(rdma->qp, &attr, IBV_QP_STATE);
		ibv_destroy_qp(rdma->qp);
	}
	if (rdma->cq)
		ibv_destroy_cq(rdma->cq);
	if (rdma->ch)
		ibv_destroy_comp_channel(rdma->ch);
	if (rdma->snd_mr)
		ibv_dereg_mr(rdma->snd_mr);
	if (rdma->snd_buf)
		free(rdma->snd_buf);
	if (rdma->rcv_mr)
		ibv_dereg_mr(rdma->rcv_mr);
	if (rdma->rcv_buf)
		free(rdma->rcv_buf);
	if (rdma->pd)
		ibv_dealloc_pd(rdma->pd);
	if (rdma->cm_id)
		rdma_destroy_id(rdma->cm_id);
}

开发者ID:doughdemon，项目名称:diod，代码行数:31，代码来源:rdmatrans.c

示例11: rdma_disconnect

RDMACMSocket::~RDMACMSocket() {
    
    rdma_disconnect(this->client_id);
    rdma_dereg_mr(this->verbs_mr);
    rdma_destroy_ep(this->client_id);
    this->verbs_buf.free();
}

开发者ID:nao23，项目名称:ramp-with-rdma，代码行数:7，代码来源:RDMACMSocket.cpp

示例12: xfer_rdma_finalize

int xfer_rdma_finalize(struct xfer_data *data)
{
        struct rdma_cm_event *event;
        int rc;

        if (data->servername) {
                rc = rdma_disconnect(data->cm_id);
                if (rc) {
                        perror("rdma_disconnect");
                        fprintf(stderr, "%d:%s: rdma disconnect error\n", pid,
				__func__);
                        return -1;
                }
        }

        rdma_get_cm_event(data->cm_channel, &event);
        if (event->event != RDMA_CM_EVENT_DISCONNECTED)
                fprintf(stderr, "%d:%s: unexpected event during disconnect %d\n",
                        pid, __func__, event->event);

        rdma_ack_cm_event(event);
        rdma_destroy_id(data->cm_id);
        rdma_destroy_event_channel(data->cm_channel);

	return 0;
}

开发者ID:disprosium8，项目名称:xfer_test，代码行数:26，代码来源:xfer_rdma.c

示例13: client_disconnect

void client_disconnect(void){

    struct rdma_event_channel *ec = s_ctx->ec;
    struct rdma_cm_id *id = s_ctx->id;
    struct rdma_cm_event *event = NULL;

        printf("ready to disconnect\n");
        rdma_disconnect(id);
        printf("send disconnect\n");

while(1){
    if(rdma_get_cm_event(ec, &event) == 0) {
        struct rdma_cm_event event_copy;
        memcpy(&event_copy, event, sizeof(*event));
        rdma_ack_cm_event(event);

        if (event_copy.event == RDMA_CM_EVENT_DISCONNECTED){
            on_disconnect(event_copy.id);
            rdma_destroy_event_channel(ec);
            break;
        }
    }

}

  return;

}

开发者ID:xiansl，项目名称:mytests，代码行数:28，代码来源:client.c

示例14: while

void RDMAServerSocket::cm_events() const {
  eventThread.send([=]() {
    hydra::util::epoll poll;
    epoll_event poll_event;
    poll_event.events = EPOLLIN;
    poll_event.data.fd = ec->fd;

    poll.add(ec->fd, &poll_event);

    while (running) {
      rdma_cm_event *cm_event = nullptr;

      int ret = poll.wait(&poll_event, 1, 2000);
      if (ret) {
        if (poll_event.data.fd == ec->fd) {
          check_zero(rdma_get_cm_event(ec.get(), &cm_event));
          check_zero(cm_event->status);
          if (cm_event->event == RDMA_CM_EVENT_CONNECT_REQUEST) {
            accept(client_t(cm_event->id));
          } else if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED) {
            rdma_disconnect(cm_event->id);
          }
          check_zero(rdma_ack_cm_event(cm_event));
        } else {
          log_err() << "Unkown fd " << poll_event.data.fd << " set. Expected "
                    << id->channel->fd;
          std::terminate();
        }
      }
    }
  });
}

开发者ID:hannesweisbach，项目名称:hydra，代码行数:32，代码来源:RDMAServerSocket.cpp

示例15: on_completion

void on_completion(struct ibv_wc *wc)
{
  struct connection *conn = (struct connection *)(uintptr_t)wc->wr_id;

  if (wc->status != IBV_WC_SUCCESS)
    die("on_completion: status is not IBV_WC_SUCCESS.");

  if (wc->opcode & IBV_WC_RECV) {
    conn->recv_state++;
    printf("RECV: Recieved: TYPE=%d\n", conn->recv_msg->type);
    if (conn->recv_msg->type == MSG_MR) {
      memcpy(&conn->peer_mr, &conn->recv_msg->data.mr, sizeof(conn->peer_mr));
      post_receives(conn); /* only rearm for MSG_MR */
      if (conn->send_state == SS_INIT) /* received peer's MR before sending ours, so send ours back */
        send_mr(conn);
    }

  } else {
    conn->send_state++;
    printf("SEND: Sent out: TYPE=%d\n", conn->send_msg->type);
  }

  if (conn->send_state == SS_MR_SENT && conn->recv_state == RS_MR_RECV) {
    /*
    struct ibv_send_wr wr, *bad_wr = NULL;
    struct ibv_sge sge;

    if (s_mode == M_WRITE)
      printf(" -> received MSG_MR. writing message to remote memory...\n");
    else
      printf(" -> received MSG_MR. reading message from remote memory...\n");

    memset(&wr, 0, sizeof(wr));

    wr.wr_id = (uintptr_t)conn;
    wr.opcode = (s_mode == M_WRITE) ? IBV_WR_RDMA_WRITE : IBV_WR_RDMA_READ;
    wr.sg_list = &sge;
    wr.num_sge = 1;
    wr.send_flags = IBV_SEND_SIGNALED;
    wr.wr.rdma.remote_addr = (uintptr_t)conn->peer_mr.addr;
    wr.wr.rdma.rkey = conn->peer_mr.rkey;

    sge.addr = (uintptr_t)conn->rdma_local_region;
    sge.length = RDMA_BUFFER_SIZE;
    sge.lkey = conn->rdma_local_mr->lkey;

    TEST_NZ(ibv_post_send(conn->qp, &wr, &bad_wr));
    printf("PSEND: Posted send request: MSG=%s\n", conn->rdma_local_region);
    */

    conn->send_msg->type = MSG_DONE;
    send_message(conn);

  } else if (conn->send_state == SS_DONE_SENT && conn->recv_state == RS_DONE_RECV) {
    printf(" -> remote buffer: %s\n", get_peer_message_region(conn));
    rdma_disconnect(conn->id);
  }
  printf("== STATE: send=%d / recv=%d ==\n", conn->send_state, conn->recv_state);
}

开发者ID:kento，项目名称:ibrdma，代码行数:59，代码来源:rdma-common-client.c

示例16: L_

void IBConnection::disconnect()
{
    L_(debug) << "[" << index_ << "] "
              << "disconnect";
    int err = rdma_disconnect(cm_id_);
    if (err)
        throw InfinibandException("rdma_disconnect failed");
}

开发者ID:cbm-fles，项目名称:flesnet，代码行数:8，代码来源:IBConnection.cpp

示例17: xprt_rdma_inject_disconnect

/**
 * xprt_rdma_inject_disconnect - inject a connection fault
 * @xprt: transport context
 *
 * If @xprt is connected, disconnect it to simulate spurious connection
 * loss.
 */
static void
xprt_rdma_inject_disconnect(struct rpc_xprt *xprt)
{
	struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);

	trace_xprtrdma_inject_dsc(r_xprt);
	rdma_disconnect(r_xprt->rx_ia.ri_id);
}

开发者ID:markus-oberhumer，项目名称:linux，代码行数:15，代码来源:transport.c

示例18: xprt_rdma_inject_disconnect

static void
xprt_rdma_inject_disconnect(struct rpc_xprt *xprt)
{
	struct rpcrdma_xprt *r_xprt = container_of(xprt, struct rpcrdma_xprt,
						   rx_xprt);

	pr_info("rpcrdma: injecting transport disconnect on xprt=%p\n", xprt);
	rdma_disconnect(r_xprt->rx_ia.ri_id);
}

开发者ID:513855417，项目名称:linux，代码行数:9，代码来源:transport.c

示例19: rping_run_client

static int rping_run_client(struct rping_cb *cb)
{
	struct ibv_recv_wr *bad_wr;
	int ret;

	ret = rping_bind_client(cb);
	if (ret)
		return ret;

	ret = rping_setup_qp(cb, cb->cm_id);
	if (ret) {
		fprintf(stderr, "setup_qp failed: %d\n", ret);
		return ret;
	}

	ret = rping_setup_buffers(cb);
	if (ret) {
		fprintf(stderr, "rping_setup_buffers failed: %d\n", ret);
		goto err1;
	}

	ret = ibv_post_recv(cb->qp, &cb->rq_wr, &bad_wr);
	if (ret) {
		fprintf(stderr, "ibv_post_recv failed: %d\n", ret);
		goto err2;
	}

	ret = pthread_create(&cb->cqthread, NULL, cq_thread, cb);
	if (ret) {
		perror("pthread_create");
		goto err2;
	}

	ret = rping_connect_client(cb);
	if (ret) {
		fprintf(stderr, "connect error %d\n", ret);
		goto err3;
	}

	ret = rping_test_client(cb);
	if (ret) {
		fprintf(stderr, "rping client failed: %d\n", ret);
		goto err4;
	}

	ret = 0;
err4:
	rdma_disconnect(cb->cm_id);
err3:
	pthread_join(cb->cqthread, NULL);
err2:
	rping_free_buffers(cb);
err1:
	rping_free_qp(cb);

	return ret;
}

开发者ID:hkimura，项目名称:pib，代码行数:57，代码来源:rping.c

示例20: rping_setup_qp

static void *rping_persistent_server_thread(void *arg)
{
	struct rping_cb *cb = arg;
	struct ibv_recv_wr *bad_wr;
	int ret;

	ret = rping_setup_qp(cb, cb->child_cm_id);
	if (ret) {
		fprintf(stderr, "setup_qp failed: %d\n", ret);
		goto err0;
	}

	ret = rping_setup_buffers(cb);
	if (ret) {
		fprintf(stderr, "rping_setup_buffers failed: %d\n", ret);
		goto err1;
	}

	ret = ibv_post_recv(cb->qp, &cb->rq_wr, &bad_wr);
	if (ret) {
		fprintf(stderr, "ibv_post_recv failed: %d\n", ret);
		goto err2;
	}

	ret = pthread_create(&cb->cqthread, NULL, cq_thread, cb);
	if (ret) {
		perror("pthread_create");
		goto err2;
	}

	ret = rping_accept(cb);
	if (ret) {
		fprintf(stderr, "connect error %d\n", ret);
		goto err3;
	}

	rping_test_server(cb);
	rdma_disconnect(cb->child_cm_id);
	pthread_join(cb->cqthread, NULL);
	rping_free_buffers(cb);
	rping_free_qp(cb);
	rdma_destroy_id(cb->child_cm_id);
	free_cb(cb);
	return NULL;
err3:
	pthread_cancel(cb->cqthread);
	pthread_join(cb->cqthread, NULL);
err2:
	rping_free_buffers(cb);
err1:
	rping_free_qp(cb);
err0:
	free_cb(cb);
	return NULL;
}

开发者ID:hkimura，项目名称:pib，代码行数:55，代码来源:rping.c

注：本文中的rdma_disconnect函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rdmsr函数代码示例发布时间：2022-05-30

C++ rdma_destroy_qp函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19188|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rdma_disconnect函数代码示例

示例1: rdma_disconnect

示例2: fio_rdmaio_close_file

示例3: client_disconnect

示例4: isert_conn_disconnect

示例5: rping_run_server

示例6: disconnect_conn_locked

示例7: ibw_disconnect

示例8: close

示例9: closeConnections

示例10: rdma_trans_destroy

示例11: rdma_disconnect

示例12: xfer_rdma_finalize

示例13: client_disconnect

示例14: while

示例15: on_completion

示例16: L_

示例17: xprt_rdma_inject_disconnect

示例18: xprt_rdma_inject_disconnect

示例19: rping_run_client

示例20: rping_setup_qp

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

DELPHI根据进程名强制关闭进程

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053