• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ rcu_read_unlock函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rcu_read_unlock函数的典型用法代码示例。如果您正苦于以下问题:C++ rcu_read_unlock函数的具体用法?C++ rcu_read_unlock怎么用?C++ rcu_read_unlock使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rcu_read_unlock函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
	struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev;

	if (skb->pkt_type == PACKET_OTHERHOST)
		goto drop;

	rcu_read_lock();

	idev = __in6_dev_get(skb->dev);

	IP6_INC_STATS_BH(IPSTATS_MIB_INRECEIVES);
	
	/* purpose     : CONFIG_IPV6    author : ChunRu    date : 2011-04-21  */	
	/* description : add dad failure to hw addr mechanism                          */
	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
	    !idev || unlikely(idev->cnf.disable_ipv6)) 
	{
		IP6_INC_STATS_BH(IPSTATS_MIB_INDISCARDS);
	/* purpose     : CONFIG_IPV6    author : ChunRu    date : 2011-10-21 */
	/* description : fix memory keeping growing after dad fail           */
		goto drop;
	}

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = &loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb->dst ? ((struct rt6_info *)skb->dst)->rt6i_idev->dev->ifindex : dev->ifindex;

	if (skb->len < sizeof(struct ipv6hdr))
		goto err;

	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) {
		IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
		goto drop;
	}

	hdr = skb->nh.ipv6h;

	if (hdr->version != 6)
		goto err;

	skb->h.raw = (u8 *)(hdr + 1);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len)
			goto truncated;
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = skb->nh.ipv6h;
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb, IP6CB(skb)->nhoff) < 0) {
			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return 0;
		}
		hdr = skb->nh.ipv6h;
	}
	
	rcu_read_unlock();
	
	return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
truncated:
	IP6_INC_STATS_BH(IPSTATS_MIB_INTRUNCATEDPKTS);
err:
	IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
drop:
	rcu_read_unlock();
	kfree_skb(skb);
out:
	return 0;
}
开发者ID:KrisChaplin,项目名称:LRT2x4_v1.0.2.06_GPL_source,代码行数:90,代码来源:ip6_input.c


示例2: hwmp_prep_frame_process

static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata,
				    struct ieee80211_mgmt *mgmt,
				    const u8 *prep_elem, u32 metric)
{
	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
	struct mesh_path *mpath;
	const u8 *target_addr, *orig_addr;
	u8 ttl, hopcount, flags;
	u8 next_hop[ETH_ALEN];
	u32 target_sn, orig_sn, lifetime;

	mhwmp_dbg(sdata, "received PREP from %pM\n",
		  PREP_IE_TARGET_ADDR(prep_elem));

	orig_addr = PREP_IE_ORIG_ADDR(prep_elem);
	if (ether_addr_equal(orig_addr, sdata->vif.addr))
		/* destination, no forwarding required */
		return;

	if (!ifmsh->mshcfg.dot11MeshForwarding)
		return;

	ttl = PREP_IE_TTL(prep_elem);
	if (ttl <= 1) {
		sdata->u.mesh.mshstats.dropped_frames_ttl++;
		return;
	}

	rcu_read_lock();
	mpath = mesh_path_lookup(sdata, orig_addr);
	if (mpath)
		spin_lock_bh(&mpath->state_lock);
	else
		goto fail;
	if (!(mpath->flags & MESH_PATH_ACTIVE)) {
		spin_unlock_bh(&mpath->state_lock);
		goto fail;
	}
	memcpy(next_hop, next_hop_deref_protected(mpath)->sta.addr, ETH_ALEN);
	spin_unlock_bh(&mpath->state_lock);
	--ttl;
	flags = PREP_IE_FLAGS(prep_elem);
	lifetime = PREP_IE_LIFETIME(prep_elem);
	hopcount = PREP_IE_HOPCOUNT(prep_elem) + 1;
	target_addr = PREP_IE_TARGET_ADDR(prep_elem);
	target_sn = PREP_IE_TARGET_SN(prep_elem);
	orig_sn = PREP_IE_ORIG_SN(prep_elem);

	mesh_path_sel_frame_tx(MPATH_PREP, flags, orig_addr, orig_sn, 0,
			       target_addr, target_sn, next_hop, hopcount,
			       ttl, lifetime, metric, 0, sdata);
	rcu_read_unlock();

	sdata->u.mesh.mshstats.fwded_unicast++;
	sdata->u.mesh.mshstats.fwded_frames++;
	return;

fail:
	rcu_read_unlock();
	sdata->u.mesh.mshstats.dropped_frames_no_route++;
}
开发者ID:Jalil89,项目名称:openwrt,代码行数:61,代码来源:mesh_hwmp.c


示例3: mesh_path_start_discovery

/**
 * mesh_path_start_discovery - launch a path discovery from the PREQ queue
 *
 * @sdata: local mesh subif
 */
void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
{
	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
	struct mesh_preq_queue *preq_node;
	struct mesh_path *mpath;
	u8 ttl, target_flags;
	const u8 *da;
	u32 lifetime;

	spin_lock_bh(&ifmsh->mesh_preq_queue_lock);
	if (!ifmsh->preq_queue_len ||
		time_before(jiffies, ifmsh->last_preq +
				min_preq_int_jiff(sdata))) {
		spin_unlock_bh(&ifmsh->mesh_preq_queue_lock);
		return;
	}

	preq_node = list_first_entry(&ifmsh->preq_queue.list,
			struct mesh_preq_queue, list);
	list_del(&preq_node->list);
	--ifmsh->preq_queue_len;
	spin_unlock_bh(&ifmsh->mesh_preq_queue_lock);

	rcu_read_lock();
	mpath = mesh_path_lookup(sdata, preq_node->dst);
	if (!mpath)
		goto enddiscovery;

	spin_lock_bh(&mpath->state_lock);
	mpath->flags &= ~MESH_PATH_REQ_QUEUED;
	if (preq_node->flags & PREQ_Q_F_START) {
		if (mpath->flags & MESH_PATH_RESOLVING) {
			spin_unlock_bh(&mpath->state_lock);
			goto enddiscovery;
		} else {
			mpath->flags &= ~MESH_PATH_RESOLVED;
			mpath->flags |= MESH_PATH_RESOLVING;
			mpath->discovery_retries = 0;
			mpath->discovery_timeout = disc_timeout_jiff(sdata);
		}
	} else if (!(mpath->flags & MESH_PATH_RESOLVING) ||
			mpath->flags & MESH_PATH_RESOLVED) {
		mpath->flags &= ~MESH_PATH_RESOLVING;
		spin_unlock_bh(&mpath->state_lock);
		goto enddiscovery;
	}

	ifmsh->last_preq = jiffies;

	if (time_after(jiffies, ifmsh->last_sn_update +
				net_traversal_jiffies(sdata)) ||
	    time_before(jiffies, ifmsh->last_sn_update)) {
		++ifmsh->sn;
		sdata->u.mesh.last_sn_update = jiffies;
	}
	lifetime = default_lifetime(sdata);
	ttl = sdata->u.mesh.mshcfg.element_ttl;
	if (ttl == 0) {
		sdata->u.mesh.mshstats.dropped_frames_ttl++;
		spin_unlock_bh(&mpath->state_lock);
		goto enddiscovery;
	}

	if (preq_node->flags & PREQ_Q_F_REFRESH)
		target_flags = MP_F_DO;
	else
		target_flags = MP_F_RF;

	spin_unlock_bh(&mpath->state_lock);
	da = (mpath->is_root) ? mpath->rann_snd_addr : broadcast_addr;
	mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->vif.addr, ifmsh->sn,
			       target_flags, mpath->dst, mpath->sn, da, 0,
			       ttl, lifetime, 0, ifmsh->preq_id++, sdata);
	mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout);

enddiscovery:
	rcu_read_unlock();
	kfree(preq_node);
}
开发者ID:Jalil89,项目名称:openwrt,代码行数:84,代码来源:mesh_hwmp.c


示例4: xfs_iget

/*
 * Look up an inode by number in the given file system.
 * The inode is looked up in the cache held in each AG.
 * If the inode is found in the cache, initialise the vfs inode
 * if necessary.
 *
 * If it is not in core, read it in from the file system's device,
 * add it to the cache and initialise the vfs inode.
 *
 * The inode is locked according to the value of the lock_flags parameter.
 * This flag parameter indicates how and if the inode's IO lock and inode lock
 * should be taken.
 *
 * mp -- the mount point structure for the current file system.  It points
 *       to the inode hash table.
 * tp -- a pointer to the current transaction if there is one.  This is
 *       simply passed through to the xfs_iread() call.
 * ino -- the number of the inode desired.  This is the unique identifier
 *        within the file system for the inode being requested.
 * lock_flags -- flags indicating how to lock the inode.  See the comment
 *		 for xfs_ilock() for a list of valid values.
 */
int
xfs_iget(
	xfs_mount_t	*mp,
	xfs_trans_t	*tp,
	xfs_ino_t	ino,
	uint		flags,
	uint		lock_flags,
	xfs_inode_t	**ipp)
{
	xfs_inode_t	*ip;
	int		error;
	xfs_perag_t	*pag;
	xfs_agino_t	agino;

	/* reject inode numbers outside existing AGs */
	if (!ino || XFS_INO_TO_AGNO(mp, ino) >= mp->m_sb.sb_agcount)
		return EINVAL;

	/* get the perag structure and ensure that it's inode capable */
	pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino));
	agino = XFS_INO_TO_AGINO(mp, ino);

again:
	error = 0;
	rcu_read_lock();
	ip = radix_tree_lookup(&pag->pag_ici_root, agino);

	if (ip) {
		error = xfs_iget_cache_hit(pag, ip, ino, flags, lock_flags);
		if (error)
			goto out_error_or_again;
	} else {
		rcu_read_unlock();
		XFS_STATS_INC(xs_ig_missed);

		error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip,
							flags, lock_flags);
		if (error)
			goto out_error_or_again;
	}
	xfs_perag_put(pag);

	*ipp = ip;

	ASSERT(ip->i_df.if_ext_max ==
	       XFS_IFORK_DSIZE(ip) / sizeof(xfs_bmbt_rec_t));
	/*
	 * If we have a real type for an on-disk inode, we can set ops(&unlock)
	 * now.	 If it's a new inode being created, xfs_ialloc will handle it.
	 */
	if (xfs_iflags_test(ip, XFS_INEW) && ip->i_d.di_mode != 0)
		xfs_setup_inode(ip);
	return 0;

out_error_or_again:
	if (error == EAGAIN) {
		delay(1);
		goto again;
	}
	xfs_perag_put(pag);
	return error;
}
开发者ID:1yankeedt,项目名称:D710BST_FL24_Kernel,代码行数:84,代码来源:xfs_iget.c


示例5: hwmp_route_info_get

/**
 * hwmp_route_info_get - Update routing info to originator and transmitter
 *
 * @sdata: local mesh subif
 * @mgmt: mesh management frame
 * @hwmp_ie: hwmp information element (PREP or PREQ)
 * @action: type of hwmp ie
 *
 * This function updates the path routing information to the originator and the
 * transmitter of a HWMP PREQ or PREP frame.
 *
 * Returns: metric to frame originator or 0 if the frame should not be further
 * processed
 *
 * Notes: this function is the only place (besides user-provided info) where
 * path routing information is updated.
 */
static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
			       struct ieee80211_mgmt *mgmt,
			       const u8 *hwmp_ie, enum mpath_frame_type action)
{
	struct ieee80211_local *local = sdata->local;
	struct mesh_path *mpath;
	struct sta_info *sta;
	bool fresh_info;
	const u8 *orig_addr, *ta;
	u32 orig_sn, orig_metric;
	unsigned long orig_lifetime, exp_time;
	u32 last_hop_metric, new_metric;
	bool process = true;

	rcu_read_lock();
	sta = sta_info_get(sdata, mgmt->sa);
	if (!sta) {
		rcu_read_unlock();
		return 0;
	}

	last_hop_metric = airtime_link_metric_get(local, sta);
	/* Update and check originator routing info */
	fresh_info = true;

	switch (action) {
	case MPATH_PREQ:
		orig_addr = PREQ_IE_ORIG_ADDR(hwmp_ie);
		orig_sn = PREQ_IE_ORIG_SN(hwmp_ie);
		orig_lifetime = PREQ_IE_LIFETIME(hwmp_ie);
		orig_metric = PREQ_IE_METRIC(hwmp_ie);
		break;
	case MPATH_PREP:
		/* Originator here refers to the MP that was the target in the
		 * Path Request. We divert from the nomenclature in the draft
		 * so that we can easily use a single function to gather path
		 * information from both PREQ and PREP frames.
		 */
		orig_addr = PREP_IE_TARGET_ADDR(hwmp_ie);
		orig_sn = PREP_IE_TARGET_SN(hwmp_ie);
		orig_lifetime = PREP_IE_LIFETIME(hwmp_ie);
		orig_metric = PREP_IE_METRIC(hwmp_ie);
		break;
	default:
		rcu_read_unlock();
		return 0;
	}
	new_metric = orig_metric + last_hop_metric;
	if (new_metric < orig_metric)
		new_metric = MAX_METRIC;
	exp_time = TU_TO_EXP_TIME(orig_lifetime);

	if (ether_addr_equal(orig_addr, sdata->vif.addr)) {
		/* This MP is the originator, we are not interested in this
		 * frame, except for updating transmitter's path info.
		 */
		process = false;
		fresh_info = false;
	} else {
		mpath = mesh_path_lookup(sdata, orig_addr);
		if (mpath) {
			spin_lock_bh(&mpath->state_lock);
			if (mpath->flags & MESH_PATH_FIXED)
				fresh_info = false;
			else if ((mpath->flags & MESH_PATH_ACTIVE) &&
			    (mpath->flags & MESH_PATH_SN_VALID)) {
				if (SN_GT(mpath->sn, orig_sn) ||
				    (mpath->sn == orig_sn &&
				     new_metric >= mpath->metric)) {
					process = false;
					fresh_info = false;
				}
			}
		} else {
			mpath = mesh_path_add(sdata, orig_addr);
			if (IS_ERR(mpath)) {
				rcu_read_unlock();
				return 0;
			}
			spin_lock_bh(&mpath->state_lock);
		}

		if (fresh_info) {
//.........这里部分代码省略.........
开发者ID:Jalil89,项目名称:openwrt,代码行数:101,代码来源:mesh_hwmp.c


示例6: arp_solicit

static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
{
	__be32 saddr = 0;
	u8  *dst_ha = NULL;
	struct net_device *dev = neigh->dev;
	__be32 target = *(__be32 *)neigh->primary_key;
	int probes = atomic_read(&neigh->probes);
	struct in_device *in_dev;

	rcu_read_lock();
	in_dev = __in_dev_get_rcu(dev);
	if (!in_dev) {
		rcu_read_unlock();
		return;
	}
	switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
	default:
	case 0:		
		if (skb && inet_addr_type(dev_net(dev),
					  ip_hdr(skb)->saddr) == RTN_LOCAL)
			saddr = ip_hdr(skb)->saddr;
		break;
	case 1:		
		if (!skb)
			break;
		saddr = ip_hdr(skb)->saddr;
		if (inet_addr_type(dev_net(dev), saddr) == RTN_LOCAL) {
			
			if (inet_addr_onlink(in_dev, target, saddr))
				break;
		}
		saddr = 0;
		break;
	case 2:		
		break;
	}
	rcu_read_unlock();

	if (!saddr)
		saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);

	probes -= neigh->parms->ucast_probes;
	if (probes < 0) {
		if (!(neigh->nud_state & NUD_VALID))
			printk(KERN_DEBUG
			       "trying to ucast probe in NUD_INVALID\n");
		dst_ha = neigh->ha;
		read_lock_bh(&neigh->lock);
	} else {
		probes -= neigh->parms->app_probes;
		if (probes < 0) {
#ifdef CONFIG_ARPD
			neigh_app_ns(neigh);
#endif
			return;
		}
	}

	arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
		 dst_ha, dev->dev_addr, NULL);
	if (dst_ha)
		read_unlock_bh(&neigh->lock);
}
开发者ID:Albinoman887,项目名称:pyramid-3.4.10,代码行数:63,代码来源:arp.c


示例7: nfnetlink_rcv_msg

/* Process one complete nfnetlink message. */
static int nfnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
{
	struct net *net = sock_net(skb->sk);
	const struct nfnl_callback *nc;
	const struct nfnetlink_subsystem *ss;
	int type, err;

	/* All the messages must at least contain nfgenmsg */
	if (nlmsg_len(nlh) < sizeof(struct nfgenmsg))
		return 0;

	type = nlh->nlmsg_type;
replay:
	rcu_read_lock();
	ss = nfnetlink_get_subsys(type);
	if (!ss) {
#ifdef CONFIG_MODULES
		rcu_read_unlock();
		request_module("nfnetlink-subsys-%d", NFNL_SUBSYS_ID(type));
		rcu_read_lock();
		ss = nfnetlink_get_subsys(type);
		if (!ss)
#endif
		{
			rcu_read_unlock();
			return -EINVAL;
		}
	}

	nc = nfnetlink_find_client(type, ss);
	if (!nc) {
		rcu_read_unlock();
		return -EINVAL;
	}

	{
		int min_len = nlmsg_total_size(sizeof(struct nfgenmsg));
		u_int8_t cb_id = NFNL_MSG_TYPE(nlh->nlmsg_type);
		struct nlattr *cda[ss->cb[cb_id].attr_count + 1];
		struct nlattr *attr = (void *)nlh + min_len;
		int attrlen = nlh->nlmsg_len - min_len;
		__u8 subsys_id = NFNL_SUBSYS_ID(type);

		err = nla_parse(cda, ss->cb[cb_id].attr_count,
				attr, attrlen, ss->cb[cb_id].policy);
		if (err < 0) {
			rcu_read_unlock();
			return err;
		}

		if (nc->call_rcu) {
			err = nc->call_rcu(net->nfnl, skb, nlh,
					   (const struct nlattr **)cda);
			rcu_read_unlock();
		} else {
			rcu_read_unlock();
			nfnl_lock(subsys_id);
			if (rcu_dereference_protected(table[subsys_id].subsys,
				lockdep_is_held(&table[subsys_id].mutex)) != ss ||
			    nfnetlink_find_client(type, ss) != nc)
				err = -EAGAIN;
			else if (nc->call)
				err = nc->call(net->nfnl, skb, nlh,
						   (const struct nlattr **)cda);
			else
				err = -EINVAL;
			nfnl_unlock(subsys_id);
		}
		if (err == -EAGAIN)
			goto replay;
		return err;
	}
}
开发者ID:battahma,项目名称:cs444,代码行数:74,代码来源:nfnetlink.c


示例8: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
	const struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev;
	struct net *net = dev_net(skb->dev);

	if (skb->pkt_type == PACKET_OTHERHOST) {
		kfree_skb(skb);
		return NET_RX_DROP;
	}

	rcu_read_lock();

	idev = __in6_dev_get(skb->dev);

	IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_IN, skb->len);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
	    !idev || unlikely(idev->cnf.disable_ipv6)) {
		IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
		goto drop;
	}

	memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;

	if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
		goto err;

	hdr = ipv6_hdr(skb);

	if (hdr->version != 6)
		goto err;

	/*
	 * RFC4291 2.5.3
	 * A packet received on an interface with a destination address
	 * of loopback must be dropped.
	 */
	if (!(dev->flags & IFF_LOOPBACK) &&
	    ipv6_addr_loopback(&hdr->daddr))
		goto err;

	/*
	 * RFC4291 2.7
	 * Multicast addresses must not be used as source addresses in IPv6
	 * packets or appear in any Routing header.
	 */
	if (ipv6_addr_is_multicast(&hdr->saddr))
		goto err;

	skb->transport_header = skb->network_header + sizeof(*hdr);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
			IP6_INC_STATS_BH(net,
					 idev, IPSTATS_MIB_INTRUNCATEDPKTS);
			goto drop;
		}
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = ipv6_hdr(skb);
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb) < 0) {
			IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return NET_RX_DROP;
		}
	}

	rcu_read_unlock();

	/* Must drop socket now because of tproxy. */
	skb_orphan(skb);

	return NF_HOOK(NFPROTO_IPV6, NF_INET_PRE_ROUTING, skb, dev, NULL,
		       ip6_rcv_finish);
err:
	IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
//.........这里部分代码省略.........
开发者ID:showp1984,项目名称:Blackout-Monarudo,代码行数:101,代码来源:ip6_input.c


示例9: SYSCALL_DEFINE3

SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
		struct sigevent __user *, timer_event_spec,
		timer_t __user *, created_timer_id)
{
	struct k_clock *kc = clockid_to_kclock(which_clock);
	struct k_itimer *new_timer;
	int error, new_timer_id;
	sigevent_t event;
	int it_id_set = IT_ID_NOT_SET;

	if (!kc)
		return -EINVAL;
	if (!kc->timer_create)
		return -EOPNOTSUPP;

	new_timer = alloc_posix_timer();
	if (unlikely(!new_timer))
		return -EAGAIN;

	spin_lock_init(&new_timer->it_lock);
	new_timer_id = posix_timer_add(new_timer);
	if (new_timer_id < 0) {
		error = new_timer_id;
		goto out;
	}

	it_id_set = IT_ID_SET;
	new_timer->it_id = (timer_t) new_timer_id;
	new_timer->it_clock = which_clock;
	new_timer->it_overrun = -1;

	if (timer_event_spec) {
		if (copy_from_user(&event, timer_event_spec, sizeof (event))) {
			error = -EFAULT;
			goto out;
		}
		rcu_read_lock();
		new_timer->it_pid = get_pid(good_sigevent(&event));
		rcu_read_unlock();
		if (!new_timer->it_pid) {
			error = -EINVAL;
			goto out;
		}
	} else {
		memset(&event.sigev_value, 0, sizeof(event.sigev_value));
		event.sigev_notify = SIGEV_SIGNAL;
		event.sigev_signo = SIGALRM;
		event.sigev_value.sival_int = new_timer->it_id;
		new_timer->it_pid = get_pid(task_tgid(current));
	}

	new_timer->it_sigev_notify     = event.sigev_notify;
	new_timer->sigq->info.si_signo = event.sigev_signo;
	new_timer->sigq->info.si_value = event.sigev_value;
	new_timer->sigq->info.si_tid   = new_timer->it_id;
	new_timer->sigq->info.si_code  = SI_TIMER;

	if (copy_to_user(created_timer_id,
			 &new_timer_id, sizeof (new_timer_id))) {
		error = -EFAULT;
		goto out;
	}

	error = kc->timer_create(new_timer);
	if (error)
		goto out;

	spin_lock_irq(&current->sighand->siglock);
	new_timer->it_signal = current->signal;
	list_add(&new_timer->list, &current->signal->posix_timers);
	spin_unlock_irq(&current->sighand->siglock);

	return 0;
	/*
	 * In the case of the timer belonging to another task, after
	 * the task is unlocked, the timer is owned by the other task
	 * and may cease to exist at any time.  Don't use or modify
	 * new_timer after the unlock call.
	 */
out:
	release_posix_timer(new_timer, it_id_set);
	return error;
}
开发者ID:AICP,项目名称:kernel_moto_shamu,代码行数:83,代码来源:posix-timers.c


示例10: task_state

static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
				struct pid *pid, struct task_struct *p)
{
	struct user_namespace *user_ns = seq_user_ns(m);
	struct group_info *group_info;
	int g, umask = -1;
	struct task_struct *tracer;
	const struct cred *cred;
	pid_t ppid, tpid = 0, tgid, ngid;
	unsigned int max_fds = 0;

	rcu_read_lock();
	ppid = pid_alive(p) ?
		task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;

	tracer = ptrace_parent(p);
	if (tracer)
		tpid = task_pid_nr_ns(tracer, ns);

	tgid = task_tgid_nr_ns(p, ns);
	ngid = task_numa_group_id(p);
	cred = get_task_cred(p);

	task_lock(p);
	if (p->fs)
		umask = p->fs->umask;
	if (p->files)
		max_fds = files_fdtable(p->files)->max_fds;
	task_unlock(p);
	rcu_read_unlock();

	if (umask >= 0)
		seq_printf(m, "Umask:\t%#04o\n", umask);
	seq_puts(m, "State:\t");
	seq_puts(m, get_task_state(p));

	seq_put_decimal_ull(m, "\nTgid:\t", tgid);
	seq_put_decimal_ull(m, "\nNgid:\t", ngid);
	seq_put_decimal_ull(m, "\nPid:\t", pid_nr_ns(pid, ns));
	seq_put_decimal_ull(m, "\nPPid:\t", ppid);
	seq_put_decimal_ull(m, "\nTracerPid:\t", tpid);
	seq_put_decimal_ull(m, "\nUid:\t", from_kuid_munged(user_ns, cred->uid));
	seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->euid));
	seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->suid));
	seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->fsuid));
	seq_put_decimal_ull(m, "\nGid:\t", from_kgid_munged(user_ns, cred->gid));
	seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->egid));
	seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->sgid));
	seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->fsgid));
	seq_put_decimal_ull(m, "\nFDSize:\t", max_fds);

	seq_puts(m, "\nGroups:\t");
	group_info = cred->group_info;
	for (g = 0; g < group_info->ngroups; g++)
		seq_put_decimal_ull(m, g ? " " : "",
				from_kgid_munged(user_ns, group_info->gid[g]));
	put_cred(cred);
	/* Trailing space shouldn't have been added in the first place. */
	seq_putc(m, ' ');

#ifdef CONFIG_PID_NS
	seq_puts(m, "\nNStgid:");
	for (g = ns->level; g <= pid->level; g++)
		seq_put_decimal_ull(m, "\t", task_tgid_nr_ns(p, pid->numbers[g].ns));
	seq_puts(m, "\nNSpid:");
	for (g = ns->level; g <= pid->level; g++)
		seq_put_decimal_ull(m, "\t", task_pid_nr_ns(p, pid->numbers[g].ns));
	seq_puts(m, "\nNSpgid:");
	for (g = ns->level; g <= pid->level; g++)
		seq_put_decimal_ull(m, "\t", task_pgrp_nr_ns(p, pid->numbers[g].ns));
	seq_puts(m, "\nNSsid:");
	for (g = ns->level; g <= pid->level; g++)
		seq_put_decimal_ull(m, "\t", task_session_nr_ns(p, pid->numbers[g].ns));
#endif
	seq_putc(m, '\n');
}
开发者ID:Lyude,项目名称:linux,代码行数:76,代码来源:array.c


示例11: build_path_from_dentry

/* Note: caller must free return buffer */
char *
build_path_from_dentry(struct dentry *direntry)
{
	struct dentry *temp;
	int namelen;
	int dfsplen;
	char *full_path;
	char dirsep;
	struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb);
	struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
	unsigned seq;

	dirsep = CIFS_DIR_SEP(cifs_sb);
	if (tcon->Flags & SMB_SHARE_IS_IN_DFS)
		dfsplen = strnlen(tcon->treeName, MAX_TREE_SIZE + 1);
	else
		dfsplen = 0;
cifs_bp_rename_retry:
	namelen = dfsplen;
	seq = read_seqbegin(&rename_lock);
	rcu_read_lock();
	for (temp = direntry; !IS_ROOT(temp);) {
		namelen += (1 + temp->d_name.len);
		temp = temp->d_parent;
		if (temp == NULL) {
			cifs_dbg(VFS, "corrupt dentry\n");
			rcu_read_unlock();
			return NULL;
		}
	}
	rcu_read_unlock();

	full_path = kmalloc(namelen+1, GFP_KERNEL);
	if (full_path == NULL)
		return full_path;
	full_path[namelen] = 0;	/* trailing null */
	rcu_read_lock();
	for (temp = direntry; !IS_ROOT(temp);) {
		spin_lock(&temp->d_lock);
		namelen -= 1 + temp->d_name.len;
		if (namelen < 0) {
			spin_unlock(&temp->d_lock);
			break;
		} else {
			full_path[namelen] = dirsep;
			strncpy(full_path + namelen + 1, temp->d_name.name,
				temp->d_name.len);
			cifs_dbg(FYI, "name: %s\n", full_path + namelen);
		}
		spin_unlock(&temp->d_lock);
		temp = temp->d_parent;
		if (temp == NULL) {
			cifs_dbg(VFS, "corrupt dentry\n");
			rcu_read_unlock();
			kfree(full_path);
			return NULL;
		}
	}
	rcu_read_unlock();
	if (namelen != dfsplen || read_seqretry(&rename_lock, seq)) {
		cifs_dbg(FYI, "did not end path lookup where expected. namelen=%ddfsplen=%d\n",
			 namelen, dfsplen);
		/* presumably this is only possible if racing with a rename
		of one of the parent directories  (we can not lock the dentries
		above us to prevent this, but retrying should be harmless) */
		kfree(full_path);
		goto cifs_bp_rename_retry;
	}
	/* DIR_SEP already set for byte  0 / vs \ but not for
	   subsequent slashes in prepath which currently must
	   be entered the right way - not sure if there is an alternative
	   since the '\' is a valid posix character so we can not switch
	   those safely to '/' if any are found in the middle of the prepath */
	/* BB test paths to Windows with '/' in the midst of prepath */

	if (dfsplen) {
		strncpy(full_path, tcon->treeName, dfsplen);
		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
			int i;
			for (i = 0; i < dfsplen; i++) {
				if (full_path[i] == '\\')
					full_path[i] = '/';
			}
		}
	}
	return full_path;
}
开发者ID:7799,项目名称:linux,代码行数:88,代码来源:dir.c


示例12: SYSCALL_DEFINE5

SYSCALL_DEFINE5(kcmp, pid_t, pid1, pid_t, pid2, int, type,
		unsigned long, idx1, unsigned long, idx2)
{
	struct task_struct *task1, *task2;
	int ret;

	rcu_read_lock();

	/*
	 * Tasks are looked up in caller's PID namespace only.
	 */
	task1 = find_task_by_vpid(pid1);
	task2 = find_task_by_vpid(pid2);
	if (!task1 || !task2)
		goto err_no_task;

	get_task_struct(task1);
	get_task_struct(task2);

	rcu_read_unlock();

	/*
	 * One should have enough rights to inspect task details.
	 */
	ret = kcmp_lock(&task1->signal->cred_guard_mutex,
			&task2->signal->cred_guard_mutex);
	if (ret)
		goto err;
	if (!ptrace_may_access(task1, PTRACE_MODE_READ) ||
	    !ptrace_may_access(task2, PTRACE_MODE_READ)) {
		ret = -EPERM;
		goto err_unlock;
	}

	switch (type) {
	case KCMP_FILE: {
		struct file *filp1, *filp2;

		filp1 = get_file_raw_ptr(task1, idx1);
		filp2 = get_file_raw_ptr(task2, idx2);

		if (filp1 && filp2)
			ret = kcmp_ptr(filp1, filp2, KCMP_FILE);
		else
			ret = -EBADF;
		break;
	}
	case KCMP_VM:
		ret = kcmp_ptr(task1->mm, task2->mm, KCMP_VM);
		break;
	case KCMP_FILES:
		ret = kcmp_ptr(task1->files, task2->files, KCMP_FILES);
		break;
	case KCMP_FS:
		ret = kcmp_ptr(task1->fs, task2->fs, KCMP_FS);
		break;
	case KCMP_SIGHAND:
		ret = kcmp_ptr(task1->sighand, task2->sighand, KCMP_SIGHAND);
		break;
	case KCMP_IO:
		ret = kcmp_ptr(task1->io_context, task2->io_context, KCMP_IO);
		break;
	case KCMP_SYSVSEM:
#ifdef CONFIG_SYSVIPC
		ret = kcmp_ptr(task1->sysvsem.undo_list,
			       task2->sysvsem.undo_list,
			       KCMP_SYSVSEM);
#else
		ret = -EOPNOTSUPP;
#endif
		break;
	default:
		ret = -EINVAL;
		break;
	}

err_unlock:
	kcmp_unlock(&task1->signal->cred_guard_mutex,
		    &task2->signal->cred_guard_mutex);
err:
	put_task_struct(task1);
	put_task_struct(task2);

	return ret;

err_no_task:
	rcu_read_unlock();
	return -ESRCH;
}
开发者ID:19Dan01,项目名称:linux,代码行数:89,代码来源:kcmp.c


示例13: ip6_mc_input

int ip6_mc_input(struct sk_buff *skb)
{
	int sdif = inet6_sdif(skb);
	const struct ipv6hdr *hdr;
	struct net_device *dev;
	bool deliver;

	__IP6_UPD_PO_STATS(dev_net(skb_dst(skb)->dev),
			 __in6_dev_get_safely(skb->dev), IPSTATS_MIB_INMCAST,
			 skb->len);

	/* skb->dev passed may be master dev for vrfs. */
	if (sdif) {
		rcu_read_lock();
		dev = dev_get_by_index_rcu(dev_net(skb->dev), sdif);
		if (!dev) {
			rcu_read_unlock();
			kfree_skb(skb);
			return -ENODEV;
		}
	} else {
		dev = skb->dev;
	}

	hdr = ipv6_hdr(skb);
	deliver = ipv6_chk_mcast_addr(dev, &hdr->daddr, NULL);
	if (sdif)
		rcu_read_unlock();

#ifdef CONFIG_IPV6_MROUTE
	/*
	 *      IPv6 multicast router mode is now supported ;)
	 */
	if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
	    !(ipv6_addr_type(&hdr->daddr) &
	      (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)) &&
	    likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
		/*
		 * Okay, we try to forward - split and duplicate
		 * packets.
		 */
		struct sk_buff *skb2;
		struct inet6_skb_parm *opt = IP6CB(skb);

		/* Check for MLD */
		if (unlikely(opt->flags & IP6SKB_ROUTERALERT)) {
			/* Check if this is a mld message */
			u8 nexthdr = hdr->nexthdr;
			__be16 frag_off;
			int offset;

			/* Check if the value of Router Alert
			 * is for MLD (0x0000).
			 */
			if (opt->ra == htons(IPV6_OPT_ROUTERALERT_MLD)) {
				deliver = false;

				if (!ipv6_ext_hdr(nexthdr)) {
					/* BUG */
					goto out;
				}
				offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
							  &nexthdr, &frag_off);
				if (offset < 0)
					goto out;

				if (ipv6_is_mld(skb, nexthdr, offset))
					deliver = true;

				goto out;
			}
			/* unknown RA - process it normally */
		}

		if (deliver)
			skb2 = skb_clone(skb, GFP_ATOMIC);
		else {
			skb2 = skb;
			skb = NULL;
		}

		if (skb2) {
			ip6_mr_input(skb2);
		}
	}
out:
#endif
	if (likely(deliver))
		ip6_input(skb);
	else {
		/* discard */
		kfree_skb(skb);
	}

	return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:96,代码来源:ip6_input.c


示例14: kfree_skb


//.........这里部分代码省略.........

	if (hdr->version != 6)
		goto err;

	__IP6_ADD_STATS(net, idev,
			IPSTATS_MIB_NOECTPKTS +
				(ipv6_get_dsfield(hdr) & INET_ECN_MASK),
			max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));
	/*
	 * RFC4291 2.5.3
	 * The loopback address must not be used as the source address in IPv6
	 * packets that are sent outside of a single node. [..]
	 * A packet received on an interface with a destination address
	 * of loopback must be dropped.
	 */
	if ((ipv6_addr_loopback(&hdr->saddr) ||
	     ipv6_addr_loopback(&hdr->daddr)) &&
	    !(dev->flags & IFF_LOOPBACK) &&
	    !netif_is_l3_master(dev))
		goto err;

	/* RFC4291 Errata ID: 3480
	 * Interface-Local scope spans only a single interface on a
	 * node and is useful only for loopback transmission of
	 * multicast.  Packets with interface-local scope received
	 * from another node must be discarded.
	 */
	if (!(skb->pkt_type == PACKET_LOOPBACK ||
	      dev->flags & IFF_LOOPBACK) &&
	    ipv6_addr_is_multicast(&hdr->daddr) &&
	    IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
		goto err;

	/* If enabled, drop unicast packets that were encapsulated in link-layer
	 * multicast or broadcast to protected against the so-called "hole-196"
	 * attack in 802.11 wireless.
	 */
	if (!ipv6_addr_is_multicast(&hdr->daddr) &&
	    (skb->pkt_type == PACKET_BROADCAST ||
	     skb->pkt_type == PACKET_MULTICAST) &&
	    idev->cnf.drop_unicast_in_l2_multicast)
		goto err;

	/* RFC4291 2.7
	 * Nodes must not originate a packet to a multicast address whose scope
	 * field contains the reserved value 0; if such a packet is received, it
	 * must be silently dropped.
	 */
	if (ipv6_addr_is_multicast(&hdr->daddr) &&
	    IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0)
		goto err;

	/*
	 * RFC4291 2.7
	 * Multicast addresses must not be used as source addresses in IPv6
	 * packets or appear in any Routing header.
	 */
	if (ipv6_addr_is_multicast(&hdr->saddr))
		goto err;

	skb->transport_header = skb->network_header + sizeof(*hdr);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
			__IP6_INC_STATS(net,
					idev, IPSTATS_MIB_INTRUNCATEDPKTS);
			goto drop;
		}
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			__IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = ipv6_hdr(skb);
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb) < 0) {
			__IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return NULL;
		}
	}

	rcu_read_unlock();

	/* Must drop socket now because of tproxy. */
	skb_orphan(skb);

	return skb;
err:
	__IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
drop:
	rcu_read_unlock();
	kfree_skb(skb);
	return NULL;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:101,代码来源:ip6_input.c


示例15: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
	struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev;

	if (skb->pkt_type == PACKET_OTHERHOST) {
		kfree_skb(skb);
		return 0;
	}

	rcu_read_lock();

	idev = __in6_dev_get(skb->dev);

	IP6_INC_STATS_BH(idev, IPSTATS_MIB_INRECEIVES);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
	    !idev || unlikely(idev->cnf.disable_ipv6)) {
		IP6_INC_STATS_BH(idev, IPSTATS_MIB_INDISCARDS);
		goto drop;
	}

	memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = &loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb->dst ? ip6_dst_idev(skb->dst)->dev->ifindex : dev->ifindex;

	if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
		goto err;

	hdr = ipv6_hdr(skb);

	if (hdr->version != 6)
		goto err;

	skb->transport_header = skb->network_header + sizeof(*hdr);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
			IP6_INC_STATS_BH(idev, IPSTATS_MIB_INTRUNCATEDPKTS);
			goto drop;
		}
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = ipv6_hdr(skb);
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb) < 0) {
			IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return 0;
		}
	}

	rcu_read_unlock();

	return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
err:
	IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
drop:
	rcu_read_unlock();
	kfree_skb(skb);
	return 0;
}
开发者ID:ECRS,项目名称:Asus-RT-N16,代码行数:82,代码来源:ip6_input.c


示例16: arp_constructor

static int arp_constructor(struct neighbour *neigh)
{
	__be32 addr = *(__be32 *)neigh->primary_key;
	struct net_device *dev = neigh->dev;
	struct in_device *in_dev;
	struct neigh_parms *parms;

	rcu_read_lock();
	in_dev = __in_dev_get_rcu(dev);
	if (in_dev == NULL) {
		rcu_read_unlock();
		return -EINVAL;
	}

	neigh->type = inet_addr_type(dev_net(dev), addr);

	parms = in_dev->arp_parms;
	__neigh_parms_put(neigh->parms);
	neigh->parms = neigh_parms_clone(parms);
	rcu_read_unlock();

	if (!dev->header_ops) {
		neigh->nud_state = NUD_NOARP;
		neigh->ops = &arp_direct_ops;
		neigh->output = neigh_direct_output;
	} else {

#if 1
		switch (dev->type) {
		default:
			break;
		case ARPHRD_ROSE:
#if IS_ENABLED(CONFIG_AX25)
		case ARPHRD_AX25:
#if IS_ENABLED(CONFIG_NETROM)
		case ARPHRD_NETROM:
#endif
			neigh->ops = &arp_broken_ops;
			neigh->output = neigh->ops->output;
			return 0;
#else
			break;
#endif
		}
#endif
		if (neigh->type == RTN_MULTICAST) {
			neigh->nud_state = NUD_NOARP;
			arp_mc_map(addr, neigh->ha, dev, 1);
		} else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
			neigh->nud_state = NUD_NOARP;
			memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
		} else if (neigh->type == RTN_BROADCAST ||
			   (dev->flags & IFF_POINTOPOINT)) {
			neigh->nud_state = NUD_NOARP;
			memcpy(neigh->ha, dev->broadcast, dev->addr_len);
		}

		if (dev->header_ops->cache)
			neigh->ops = &arp_hh_ops;
		else
			neigh->ops = &arp_generic_ops;

		if (neigh->nud_state & NUD_VALID)
			neigh->output = neigh->ops->connected_output;
		else
			neigh->output = neigh->ops->output;
	}
	return 0;
}
开发者ID:Albinoman887,项目名称:pyramid-3.4.10,代码行数:69,代码来源:arp.c


示例17: wl1271_event_process


//.........这里部分代码省略.........

	/* disable dynamic PS when requested by the firmware */
	if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
	    wl->bss_type == BSS_TYPE_STA_BSS) {
		if (mbox->soft_gemini_sense_info)
			ieee80211_disable_dyn_ps(wl->vif);
		else
			ieee80211_enable_dyn_ps(wl->vif);
	}

	/*
	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
	 * filtering) is enabled. Without PSM, the stack will receive all
	 * beacons and can detect beacon loss by itself.
	 *
	 * As there's possibility that the driver disables PSM before receiving
	 * BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
	 *
	 */
	if ((vector & BSS_LOSE_EVENT_ID) && !is_ap) {
		wl1271_info("Beacon loss detected.");

		/* indicate to the stack, that beacons have been lost */
		beacon_loss = true;
	}

	if ((vector & PS_REPORT_EVENT_ID) && !is_ap) {
		wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
		ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
		if (ret < 0)
			return ret;
	}

	if ((vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID) && !is_ap)
		wl1271_event_pspoll_delivery_fail(wl);

	if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
		wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
		if (wl->vif)
			wl1271_event_rssi_trigger(wl, mbox);
	}

	if ((vector & DUMMY_PACKET_EVENT_ID) && !is_ap) {
		wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
		if (wl->vif)
			wl1271_tx_dummy_packet(wl);
	}

	/*
	 * "TX retries exceeded" has a different meaning according to mode.
	 * In AP mode the offending station is disconnected. In STA mode we
	 * report connection loss.
	 */
	if (vector & MAX_TX_RETRY_EVENT_ID) {
		wl1271_debug(DEBUG_EVENT, "MAX_TX_RETRY_EVENT_ID");
		if (is_ap) {
			sta_bitmap |= le16_to_cpu(mbox->sta_tx_retry_exceeded);
			disconnect_sta = true;
		} else {
			beacon_loss = true;
		}
	}

	if ((vector & INACTIVE_STA_EVENT_ID) && is_ap) {
		wl1271_debug(DEBUG_EVENT, "INACTIVE_STA_EVENT_ID");
		sta_bitmap |= le16_to_cpu(mbox->sta_aging_status);
		disconnect_sta = true;
	}

	if (wl->vif && beacon_loss)
		ieee80211_connection_loss(wl->vif);

	if (is_ap && disconnect_sta) {
		u32 num_packets = wl->conf.tx.max_tx_retries;
		struct ieee80211_sta *sta;
		const u8 *addr;
		int h;

		for (h = find_first_bit(&sta_bitmap, AP_MAX_LINKS);
		     h < AP_MAX_LINKS;
		     h = find_next_bit(&sta_bitmap, AP_MAX_LINKS, h+1)) {
			if (!wl1271_is_active_sta(wl, h))
				continue;

			addr = wl->links[h].addr;

			rcu_read_lock();
			sta = ieee80211_find_sta(wl->vif, addr);
			if (sta) {
				wl1271_debug(DEBUG_EVENT, "remove sta %d", h);
#if 0
				ieee80211_report_low_ack(sta, num_packets);
#endif
			}
			rcu_read_unlock();
		}
	}

	return 0;
}
开发者ID:OESF,项目名称:linux-linaro-natty,代码行数:101,代码来源:event.c

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ rcu_read_unlock_bh函数代码示例发布时间:2022-05-30
下一篇:
C++ rcu_read_lock_bh函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap