本文整理汇总了C++中rb_str_set_len函数的典型用法代码示例。如果您正苦于以下问题:C++ rb_str_set_len函数的具体用法?C++ rb_str_set_len怎么用?C++ rb_str_set_len使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了rb_str_set_len函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: read_check
static int read_check(struct io_args *a, long n, const char *msg, int io_wait)
{
if (n == -1) {
if (errno == EINTR) {
a->fd = my_fileno(a->io);
return -1;
}
rb_str_set_len(a->buf, 0);
if (errno == EAGAIN) {
if (io_wait) {
(void)kgio_call_wait_readable(a->io);
/* buf may be modified in other thread/fiber */
rb_str_modify(a->buf);
rb_str_resize(a->buf, a->len);
a->ptr = RSTRING_PTR(a->buf);
return -1;
} else {
a->buf = sym_wait_readable;
return 0;
}
}
rd_sys_fail(msg);
}
rb_str_set_len(a->buf, n);
if (n == 0)
a->buf = Qnil;
return 0;
}
开发者ID:simplegeo,项目名称:kgio,代码行数:29,代码来源:read_write.c
示例2: tfio_gets
/**
Gets returns a line. this is okay for small lines,
but shouldn't really be used.
Limited to ~ 1Mb of a line length.
*/
static VALUE tfio_gets(VALUE self) {
int fd = get_tmpfile(self);
size_t pos = get_pos(self);
size_t end = get_end(self);
if (pos == end)
return Qnil;
size_t pos_e = pos;
char c;
int ret;
VALUE buffer;
do {
ret = pread(fd, &c, 1, pos_e);
} while (ret > 0 && c != '\n' && (++pos_e < end));
set_pos(self, pos_e + 1);
if (pos > pos_e) {
buffer = rb_str_buf_new(pos_e - pos);
// make sure the buffer is binary encoded.
rb_enc_associate(buffer, BinaryEncoding);
if (pread(fd, RSTRING_PTR(buffer), pos_e - pos, pos) < 0)
return Qnil;
rb_str_set_len(buffer, pos_e - pos);
return buffer;
}
return Qnil;
}
开发者ID:boazsegev,项目名称:iodine,代码行数:32,代码来源:rb-rack-io.c
示例3: remove_scope_id
/*
* call-seq:
* remove_scope_id(ip_address)
*
* Returns copy of IP address with Scope ID removed,
* if address has it (only IPv6 actually may have it).
*/
static VALUE remove_scope_id(const char *addr)
{
VALUE rv = rb_str_new2(addr);
long len = RSTRING_LEN(rv);
char *ptr = RSTRING_PTR(rv);
char *pct = memchr(ptr, '%', len);
/*
* remove scoped portion
* Ruby equivalent: rv.sub!(/%([^\]]*)\]/, "]")
*/
if (pct) {
size_t newlen = pct - ptr;
char *rbracket = memchr(pct, ']', len - newlen);
if (rbracket) {
size_t move = len - (rbracket - ptr);
memmove(pct, rbracket, move);
newlen += move;
rb_str_set_len(rv, newlen);
} else {
rb_raise(rb_eArgError,
"']' not found in IPv6 addr=%s", ptr);
}
}
return rv;
}
开发者ID:Daraexus,项目名称:SimuladorCloud,代码行数:36,代码来源:linux_inet_diag.c
示例4: ossl_cipher_update
/*
* call-seq:
* cipher.update(data [, buffer]) -> string or buffer
*
* === Parameters
* +data+ is a nonempty string.
* +buffer+ is an optional string to store the result.
*/
static VALUE
ossl_cipher_update(int argc, VALUE *argv, VALUE self)
{
EVP_CIPHER_CTX *ctx;
char *in;
int in_len, out_len;
VALUE data, str;
rb_scan_args(argc, argv, "11", &data, &str);
StringValue(data);
in = RSTRING_PTR(data);
if ((in_len = RSTRING_LEN(data)) == 0)
rb_raise(rb_eArgError, "data must not be empty");
GetCipher(self, ctx);
out_len = in_len+EVP_CIPHER_CTX_block_size(ctx);
if (NIL_P(str)) {
str = rb_str_new(0, out_len);
} else {
StringValue(str);
rb_str_resize(str, out_len);
}
if (!EVP_CipherUpdate(ctx, RSTRING_PTR(str), &out_len, in, in_len))
ossl_raise(eCipherError, NULL);
assert(out_len < RSTRING_LEN(str));
rb_str_set_len(str, out_len);
return str;
}
开发者ID:AdamDotCom,项目名称:my-rvm,代码行数:39,代码来源:ossl_cipher.c
示例5: in_addr_set
static VALUE in_addr_set(VALUE io, struct sockaddr_storage *addr, socklen_t len)
{
VALUE host;
int host_len, rc;
char *host_ptr;
switch (addr->ss_family) {
case AF_INET:
host_len = (long)INET_ADDRSTRLEN;
break;
case AF_INET6:
host_len = (long)INET6_ADDRSTRLEN;
break;
default:
rb_raise(rb_eRuntimeError, "unsupported address family");
}
host = rb_str_new(NULL, host_len);
host_ptr = RSTRING_PTR(host);
rc = getnameinfo((struct sockaddr *)addr, len,
host_ptr, host_len, NULL, 0, NI_NUMERICHOST);
if (rc != 0)
rb_raise(rb_eRuntimeError, "getnameinfo: %s", gai_strerror(rc));
rb_str_set_len(host, strlen(host_ptr));
return rb_ivar_set(io, iv_kgio_addr, host);
}
开发者ID:simplegeo,项目名称:kgio,代码行数:25,代码来源:accept.c
示例6: ossl_cipher_update
/*
* call-seq:
* cipher.update(data [, buffer]) -> string or buffer
*
* Encrypts data in a streaming fashion. Hand consecutive blocks of data
* to the +update+ method in order to encrypt it. Returns the encrypted
* data chunk. When done, the output of Cipher#final should be additionally
* added to the result.
*
* === Parameters
* +data+ is a nonempty string.
* +buffer+ is an optional string to store the result.
*/
static VALUE
ossl_cipher_update(int argc, VALUE *argv, VALUE self)
{
EVP_CIPHER_CTX *ctx;
unsigned char *in;
long in_len, out_len;
VALUE data, str;
rb_scan_args(argc, argv, "11", &data, &str);
StringValue(data);
in = (unsigned char *)RSTRING_PTR(data);
if ((in_len = RSTRING_LEN(data)) == 0)
ossl_raise(rb_eArgError, "data must not be empty");
GetCipher(self, ctx);
out_len = in_len+EVP_CIPHER_CTX_block_size(ctx);
if (out_len <= 0) {
ossl_raise(rb_eRangeError,
"data too big to make output buffer: %ld bytes", in_len);
}
if (NIL_P(str)) {
str = rb_str_new(0, out_len);
} else {
StringValue(str);
rb_str_resize(str, out_len);
}
if (!ossl_cipher_update_long(ctx, (unsigned char *)RSTRING_PTR(str), &out_len, in, in_len))
ossl_raise(eCipherError, NULL);
assert(out_len < RSTRING_LEN(str));
rb_str_set_len(str, out_len);
return str;
}
开发者ID:hilben,项目名称:ruby_test,代码行数:48,代码来源:ossl_cipher.c
示例7: rg_read_all
static VALUE
rg_read_all(int argc, VALUE *argv, VALUE self)
{
VALUE rbcount, cancellable, result;
gsize count;
GError *error = NULL;
gsize bytes_read;
rb_scan_args(argc, argv, "11", &rbcount, &cancellable);
count = RVAL2GSIZE(rbcount);
result = rb_str_new(NULL, count);
if (!g_input_stream_read_all(_SELF(self),
RSTRING_PTR(result),
count,
&bytes_read,
RVAL2GCANCELLABLE(cancellable),
&error))
rbgio_raise_error(error);
rb_str_set_len(result, bytes_read);
rb_str_resize(result, bytes_read);
OBJ_TAINT(result);
return result;
}
开发者ID:msakai,项目名称:ruby-gnome2,代码行数:25,代码来源:ginputstream.c
示例8: ruby__sfvwrite
static int
ruby__sfvwrite(register rb_printf_buffer *fp, register struct __suio *uio)
{
struct __siov *iov;
VALUE result = (VALUE)fp->_bf._base;
char *buf = (char*)fp->_p;
size_t len, n;
size_t blen = buf - RSTRING_PTR(result), bsiz = fp->_w;
if (RBASIC(result)->klass) {
rb_raise(rb_eRuntimeError, "rb_vsprintf reentered");
}
if ((len = uio->uio_resid) == 0)
return 0;
CHECK(len);
buf += blen;
fp->_w = bsiz;
for (iov = uio->uio_iov; len > 0; ++iov) {
MEMCPY(buf, iov->iov_base, char, n = iov->iov_len);
buf += n;
len -= n;
}
fp->_p = (unsigned char *)buf;
rb_str_set_len(result, buf - RSTRING_PTR(result));
return 0;
}
开发者ID:DashYang,项目名称:sim,代码行数:26,代码来源:sprintf.c
示例9: noleak_rb_str_cat
// This function is equivalent to rb_str_cat(), but unlike the real
// rb_str_cat(), it doesn't leak memory in some versions of Ruby.
// For more information, see:
// https://bugs.ruby-lang.org/issues/11328
VALUE noleak_rb_str_cat(VALUE rb_str, const char *str, long len) {
size_t oldlen = RSTRING_LEN(rb_str);
rb_str_modify_expand(rb_str, len);
char *p = RSTRING_PTR(rb_str);
memcpy(p + oldlen, str, len);
rb_str_set_len(rb_str, oldlen + len);
}
开发者ID:Holygitzdq,项目名称:ElVis,代码行数:11,代码来源:encode_decode.c
示例10: tfio_read
// Reads data from the IO, according to the Rack specifications for `#read`.
static VALUE tfio_read(int argc, VALUE *argv, VALUE self) {
int fd = get_tmpfile(self);
size_t pos = get_pos(self);
size_t end = get_end(self);
VALUE buffer = Qnil;
char ret_nil = 0;
ssize_t len = 0;
// get the buffer object if given
if (argc == 2) {
Check_Type(argv[1], T_STRING);
buffer = argv[1];
}
// get the length object, if given
if (argc > 0 && argv[0] != Qnil) {
Check_Type(argv[0], T_FIXNUM);
len = FIX2LONG(argv[0]);
if (len < 0)
rb_raise(rb_eRangeError, "length should be bigger then 0.");
ret_nil = 1;
}
// return if we're at the EOF.
if (pos == end)
goto no_data;
// calculate length if it wasn't specified.
if (len == 0) {
// make sure we're not reading more then we have
len = end - pos;
// set position for future reads
set_pos(self, end);
if (len == 0)
goto no_data;
} else {
// set position for future reads
set_pos(self, pos + len);
}
// limit read to what we have
if (len + pos > end)
len = end - pos;
// create the buffer if we don't have one.
if (buffer == Qnil) {
buffer = rb_str_buf_new(len);
// make sure the buffer is binary encoded.
rb_enc_associate(buffer, BinaryEncoding);
} else {
// make sure the buffer is binary encoded.
rb_enc_associate(buffer, BinaryEncoding);
if (rb_str_capacity(buffer) < len)
rb_str_resize(buffer, len);
}
// read the data.
if (pread(fd, RSTRING_PTR(buffer), len, pos) <= 0)
goto no_data;
rb_str_set_len(buffer, len);
return buffer;
no_data:
if (ret_nil)
return Qnil;
else
return rb_str_buf_new(0);
}
开发者ID:boazsegev,项目名称:iodine,代码行数:61,代码来源:rb-rack-io.c
示例11: ossl_ssl_read
/*
* call-seq:
* ssl.sysread(length) => string
* ssl.sysread(length, buffer) => buffer
*
* === Parameters
* * +length+ is a positive integer.
* * +buffer+ is a string used to store the result.
*/
static VALUE
ossl_ssl_read(int argc, VALUE *argv, VALUE self)
{
SSL *ssl;
int ilen, nread = 0;
VALUE len, str;
rb_scan_args(argc, argv, "11", &len, &str);
ilen = NUM2INT(len);
if(NIL_P(str)) {
str = rb_str_new(0, ilen);
} else {
StringValue(str);
rb_str_modify(str);
rb_str_resize(str, ilen);
}
if(ilen == 0) return str;
Data_Get_Struct(self, SSL, ssl);
int fd = rb_io_fd(ossl_ssl_get_io(self));
if (ssl) {
if(SSL_pending(ssl) <= 0)
rb_thread_wait_fd(fd);
for (;;) {
nread = SSL_read(ssl, RSTRING_PTR(str), RSTRING_LEN(str));
switch(ssl_get_error(ssl, nread)) {
case SSL_ERROR_NONE:
goto end;
case SSL_ERROR_ZERO_RETURN:
rb_eof_error();
case SSL_ERROR_WANT_WRITE:
rb_io_wait_writable(fd);
continue;
case SSL_ERROR_WANT_READ:
rb_io_wait_readable(fd);
continue;
case SSL_ERROR_SYSCALL:
if(ERR_peek_error() == 0 && nread == 0) rb_eof_error();
rb_sys_fail(0);
default:
ossl_raise(eSSLError, "SSL_read:");
}
}
}
else {
ID id_sysread = rb_intern("sysread");
rb_warning("SSL session is not started yet.");
return rb_funcall(ossl_ssl_get_io(self), id_sysread, 2, len, str);
}
end:
rb_str_set_len(str, nread);
OBJ_TAINT(str);
return str;
}
开发者ID:FunkyFortune,项目名称:rubinius,代码行数:68,代码来源:ossl_ssl.c
示例12: pg_rb_str_ensure_capa
/* Use somewhat faster version with access to string capacity on MRI */
char *
pg_rb_str_ensure_capa( VALUE str, long expand_len, char *curr_ptr, char **end_ptr )
{
long curr_len = curr_ptr - RSTRING_PTR(str);
long curr_capa = rb_str_capacity( str );
if( curr_capa < curr_len + expand_len ){
rb_str_set_len( str, curr_len );
rb_str_modify_expand( str, (curr_len + expand_len) * 2 - curr_capa );
curr_ptr = RSTRING_PTR(str) + curr_len;
}
if( end_ptr )
*end_ptr = RSTRING_PTR(str) + rb_str_capacity( str );
return curr_ptr;
}
开发者ID:RapsIn4,项目名称:pg,代码行数:15,代码来源:pg.c
示例13: pg_coder_encode
/*
* call-seq:
* coder.encode( value [, encoding] )
*
* Encodes the given Ruby object into string representation, without
* sending data to/from the database server.
*
* A nil value is passed through.
*
*/
static VALUE
pg_coder_encode(int argc, VALUE *argv, VALUE self)
{
VALUE res;
VALUE intermediate;
VALUE value;
int len, len2;
int enc_idx;
t_pg_coder *this = DATA_PTR(self);
if(argc < 1 || argc > 2){
rb_raise(rb_eArgError, "wrong number of arguments (%i for 1..2)", argc);
}else if(argc == 1){
enc_idx = rb_ascii8bit_encindex();
}else{
enc_idx = rb_to_encoding_index(argv[1]);
}
value = argv[0];
if( NIL_P(value) )
return Qnil;
if( !this->enc_func ){
rb_raise(rb_eRuntimeError, "no encoder function defined");
}
len = this->enc_func( this, value, NULL, &intermediate, enc_idx );
if( len == -1 ){
/* The intermediate value is a String that can be used directly. */
OBJ_INFECT(intermediate, value);
return intermediate;
}
res = rb_str_new(NULL, len);
PG_ENCODING_SET_NOCHECK(res, enc_idx);
len2 = this->enc_func( this, value, RSTRING_PTR(res), &intermediate, enc_idx );
if( len < len2 ){
rb_bug("%s: result length of first encoder run (%i) is less than second run (%i)",
rb_obj_classname( self ), len, len2 );
}
rb_str_set_len( res, len2 );
OBJ_INFECT(res, value);
RB_GC_GUARD(intermediate);
return res;
}
开发者ID:bpaysen,项目名称:simplecodecasts_saas,代码行数:58,代码来源:pg_coder.c
示例14: ossl_cipher_final
/*
* call-seq:
* cipher.final -> string
*
* Returns the remaining data held in the cipher object. Further calls to
* Cipher#update or Cipher#final will return garbage. This call should always
* be made as the last call of an encryption or decryption operation, after
* after having fed the entire plaintext or ciphertext to the Cipher instance.
*
* If an authenticated cipher was used, a CipherError is raised if the tag
* could not be authenticated successfully. Only call this method after
* setting the authentication tag and passing the entire contents of the
* ciphertext into the cipher.
*/
static VALUE
ossl_cipher_final(VALUE self)
{
EVP_CIPHER_CTX *ctx;
int out_len;
VALUE str;
GetCipher(self, ctx);
str = rb_str_new(0, EVP_CIPHER_CTX_block_size(ctx));
if (!EVP_CipherFinal_ex(ctx, (unsigned char *)RSTRING_PTR(str), &out_len))
ossl_raise(eCipherError, NULL);
assert(out_len <= RSTRING_LEN(str));
rb_str_set_len(str, out_len);
return str;
}
开发者ID:hilben,项目名称:ruby_test,代码行数:30,代码来源:ossl_cipher.c
示例15: rg_peek
static VALUE
rg_peek(VALUE self, VALUE rboffset, VALUE rbcount)
{
gsize offset = RVAL2GSIZE(rboffset);
gsize count = RVAL2GSIZE(rbcount);
VALUE result = rb_str_new(NULL, count);
gsize bytes_peeked = g_buffered_input_stream_peek(_SELF(self),
RSTRING_PTR(result),
offset,
count);
rb_str_set_len(result, bytes_peeked);
rb_str_resize(result, bytes_peeked);
OBJ_TAINT(result);
return result;
}
开发者ID:Mazwak,项目名称:ruby-gnome2,代码行数:17,代码来源:rbgiobufferedinputstream.c
示例16: mCDB_Reader_get
VALUE mCDB_Reader_get(VALUE self, VALUE key) {
struct cdb db;
VALUE value;
StringValue(key);
int fd = open_cdb_fd(self);
size_t vlen;
cdb_init(&db,fd);
if(cdb_find(&db,RSTRING_PTR(key),RSTRING_LEN(key)) > 0) {
vlen = cdb_datalen(&db);
value = rb_str_buf_new(vlen);
cdb_read(&db,RSTRING_PTR(value),vlen,cdb_datapos(&db));
rb_str_set_len(value,vlen);
return value;
}
close(fd);
return Qnil;
}
开发者ID:mbj,项目名称:ruby-cdb,代码行数:17,代码来源:reader.c
示例17: pkcs11_C_GetOperationState
static VALUE
pkcs11_C_GetOperationState(VALUE self, VALUE session)
{
CK_RV rv;
CK_C_GetOperationState func;
VALUE state;
CK_ULONG size;
GetFunction(self, C_GetOperationState, func);
CallFunction(C_GetOperationState, func, rv, NUM2HANDLE(session), NULL_PTR, &size);
if (rv != CKR_OK) pkcs11_raise(self,rv);
state = rb_str_new(0, size);
CallFunction(C_GetOperationState, func, rv, NUM2HANDLE(session), (CK_BYTE_PTR)RSTRING_PTR(state), &size);
if (rv != CKR_OK) pkcs11_raise(self,rv);
rb_str_set_len(state, size);
return state;
}
开发者ID:cprice404,项目名称:pkcs11,代码行数:18,代码来源:pk11.c
示例18: mCDB_Reader_each_for_key
VALUE mCDB_Reader_each_for_key(VALUE self,VALUE key) {
struct cdb db;
VALUE value;
struct cdb_find find;
StringValue(key);
int fd = open_cdb_fd(self);
size_t vlen;
cdb_init(&db,fd);
cdb_findinit(&find,&db,RSTRING_PTR(key),RSTRING_LEN(key));
while(cdb_findnext(&find) > 0) {
vlen = cdb_datalen(&db);
value = rb_str_buf_new(vlen);
cdb_read(&db,RSTRING_PTR(value),vlen,cdb_datapos(&db));
rb_str_set_len(value,vlen);
rb_yield(value);
}
close(fd);
return Qnil;
}
开发者ID:mbj,项目名称:ruby-cdb,代码行数:19,代码来源:reader.c
示例19: _receive
static VALUE _receive(int rflags, int argc, VALUE *argv, VALUE self)
{
struct posix_mq *mq = get(self, 1);
struct rw_args x;
VALUE buffer, timeout;
struct timespec expire;
if (mq->attr.mq_msgsize < 0) {
if (mq_getattr(mq->des, &mq->attr) < 0)
rb_sys_fail("mq_getattr");
}
rb_scan_args(argc, argv, "02", &buffer, &timeout);
x.timeout = convert_timeout(&expire, timeout);
if (NIL_P(buffer)) {
buffer = rb_str_new(0, mq->attr.mq_msgsize);
} else {
StringValue(buffer);
rb_str_modify(buffer);
rb_str_resize(buffer, mq->attr.mq_msgsize);
}
OBJ_TAINT(buffer);
x.msg_ptr = RSTRING_PTR(buffer);
x.msg_len = (size_t)mq->attr.mq_msgsize;
x.des = mq->des;
retry:
WITHOUT_GVL(xrecv, &x, RUBY_UBF_IO, 0);
if (x.received < 0) {
if (errno == EINTR)
goto retry;
if (errno == EAGAIN && (rflags & PMQ_TRY))
return Qnil;
rb_sys_fail("mq_receive");
}
rb_str_set_len(buffer, x.received);
if (rflags & PMQ_WANTARRAY)
return rb_ary_new3(2, buffer, UINT2NUM(x.msg_prio));
return buffer;
}
开发者ID:tmm1,项目名称:ruby_posix_mq,代码行数:43,代码来源:posix_mq.c
示例20: rb_sys_enc_warning
void
rb_sys_enc_warning(rb_encoding *enc, const char *fmt, ...)
{
VALUE mesg;
va_list args;
int errno_save;
errno_save = errno;
if (!RTEST(ruby_verbose)) return;
va_start(args, fmt);
mesg = warning_string(enc, fmt, args);
va_end(args);
rb_str_set_len(mesg, RSTRING_LEN(mesg)-1);
rb_str_catf(mesg, ": %s\n", strerror(errno_save));
rb_write_error_str(mesg);
errno = errno_save;
}
开发者ID:jasonrclark,项目名称:gdb_a_gentle_intro,代码行数:19,代码来源:error.c
注:本文中的rb_str_set_len函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论