C++ rb_include_module函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rb_include_module函数的典型用法代码示例。如果您正苦于以下问题：C++ rb_include_module函数的具体用法？C++ rb_include_module怎么用？C++ rb_include_module使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rb_include_module函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init_kgio_connect

void init_kgio_connect(void)
{
	VALUE mKgio = rb_define_module("Kgio");
	VALUE cSocket = rb_const_get(rb_cObject, rb_intern("Socket"));
	VALUE mSocketMethods = rb_const_get(mKgio, rb_intern("SocketMethods"));
	VALUE cKgio_Socket, cTCPSocket, cUNIXSocket;

	/*
	 * Document-class: Kgio::Socket
	 *
	 * A generic socket class with Kgio::SocketMethods included.
	 * This is returned by all Kgio methods that accept(2) a connected
	 * stream socket.
	 */
	cKgio_Socket = rb_define_class_under(mKgio, "Socket", cSocket);
	rb_include_module(cKgio_Socket, mSocketMethods);
	rb_define_singleton_method(cKgio_Socket, "new", kgio_new, -1);
	rb_define_singleton_method(cKgio_Socket, "connect", kgio_connect, 1);
	rb_define_singleton_method(cKgio_Socket, "start", kgio_start, 1);
#if defined(MSG_FASTOPEN) && defined(KGIO_HAVE_THREAD_CALL_WITHOUT_GVL)
	rb_define_method(cKgio_Socket, "kgio_fastopen", fastopen, 2);
#endif
	/*
	 * Document-class: Kgio::TCPSocket
	 *
	 * Kgio::TCPSocket should be used in place of the plain TCPSocket
	 * when kgio_* methods are needed.
	 */
	cTCPSocket = rb_const_get(rb_cObject, rb_intern("TCPSocket"));
	cTCPSocket = rb_define_class_under(mKgio, "TCPSocket", cTCPSocket);
	rb_include_module(cTCPSocket, mSocketMethods);
	rb_define_singleton_method(cTCPSocket, "new", kgio_tcp_connect, 2);
	rb_define_singleton_method(cTCPSocket, "start", kgio_tcp_start, 2);

	/*
	 * Document-class: Kgio::UNIXSocket
	 *
	 * Kgio::UNIXSocket should be used in place of the plain UNIXSocket
	 * when kgio_* methods are needed.
	 */
	cUNIXSocket = rb_const_get(rb_cObject, rb_intern("UNIXSocket"));
	cUNIXSocket = rb_define_class_under(mKgio, "UNIXSocket", cUNIXSocket);
	rb_include_module(cUNIXSocket, mSocketMethods);
	rb_define_singleton_method(cUNIXSocket, "new", kgio_unix_connect, 1);
	rb_define_singleton_method(cUNIXSocket, "start", kgio_unix_start, 1);
	init_sock_for_fd();
}

开发者ID:LegalHackers，项目名称:takemyphotodown，代码行数:47，代码来源:connect.c

示例2: init_pg_result

void
init_pg_result()
{
	rb_cPGresult = rb_define_class_under( rb_mPG, "Result", rb_cObject );
	rb_include_module(rb_cPGresult, rb_mEnumerable);
	rb_include_module(rb_cPGresult, rb_mPGconstants);

	/******     PG::Result INSTANCE METHODS: libpq     ******/
	rb_define_method(rb_cPGresult, "result_status", pgresult_result_status, 0);
	rb_define_method(rb_cPGresult, "res_status", pgresult_res_status, 1);
	rb_define_method(rb_cPGresult, "error_message", pgresult_error_message, 0);
	rb_define_alias( rb_cPGresult, "result_error_message", "error_message");
	rb_define_method(rb_cPGresult, "error_field", pgresult_error_field, 1);
	rb_define_alias( rb_cPGresult, "result_error_field", "error_field" );
	rb_define_method(rb_cPGresult, "clear", pg_result_clear, 0);
	rb_define_method(rb_cPGresult, "check", pg_result_check, 0);
	rb_define_alias (rb_cPGresult, "check_result", "check");
	rb_define_method(rb_cPGresult, "ntuples", pgresult_ntuples, 0);
	rb_define_alias(rb_cPGresult, "num_tuples", "ntuples");
	rb_define_method(rb_cPGresult, "nfields", pgresult_nfields, 0);
	rb_define_alias(rb_cPGresult, "num_fields", "nfields");
	rb_define_method(rb_cPGresult, "fname", pgresult_fname, 1);
	rb_define_method(rb_cPGresult, "fnumber", pgresult_fnumber, 1);
	rb_define_method(rb_cPGresult, "ftable", pgresult_ftable, 1);
	rb_define_method(rb_cPGresult, "ftablecol", pgresult_ftablecol, 1);
	rb_define_method(rb_cPGresult, "fformat", pgresult_fformat, 1);
	rb_define_method(rb_cPGresult, "ftype", pgresult_ftype, 1);
	rb_define_method(rb_cPGresult, "fmod", pgresult_fmod, 1);
	rb_define_method(rb_cPGresult, "fsize", pgresult_fsize, 1);
	rb_define_method(rb_cPGresult, "getvalue", pgresult_getvalue, 2);
	rb_define_method(rb_cPGresult, "getisnull", pgresult_getisnull, 2);
	rb_define_method(rb_cPGresult, "getlength", pgresult_getlength, 2);
	rb_define_method(rb_cPGresult, "nparams", pgresult_nparams, 0);
	rb_define_method(rb_cPGresult, "paramtype", pgresult_paramtype, 1);
	rb_define_method(rb_cPGresult, "cmd_status", pgresult_cmd_status, 0);
	rb_define_method(rb_cPGresult, "cmd_tuples", pgresult_cmd_tuples, 0);
	rb_define_alias(rb_cPGresult, "cmdtuples", "cmd_tuples");
	rb_define_method(rb_cPGresult, "oid_value", pgresult_oid_value, 0);

	/******     PG::Result INSTANCE METHODS: other     ******/
	rb_define_method(rb_cPGresult, "[]", pgresult_aref, 1);
	rb_define_method(rb_cPGresult, "each", pgresult_each, 0);
	rb_define_method(rb_cPGresult, "fields", pgresult_fields, 0);
	rb_define_method(rb_cPGresult, "values", pgresult_values, 0);
	rb_define_method(rb_cPGresult, "column_values", pgresult_column_values, 1);
	rb_define_method(rb_cPGresult, "field_values", pgresult_field_values, 1);
}

开发者ID:danielcode，项目名称:ruby-pg，代码行数:47，代码来源:pg_result.c

示例3: rb_grn_init_patricia_trie_cursor

void
rb_grn_init_patricia_trie_cursor (VALUE mGrn)
{
    rb_cGrnPatriciaTrieCursor =
        rb_define_class_under(mGrn, "PatriciaTrieCursor", rb_cGrnTableCursor);

    rb_include_module(rb_cGrnPatriciaTrieCursor, rb_mGrnTableCursorKeySupport);
}

开发者ID:cosmo0920，项目名称:rroonga，代码行数:8，代码来源:rb-grn-patricia-trie-cursor.c

示例4: Init_do_sqlite3_ext

void Init_do_sqlite3_ext() {
  rb_require("bigdecimal");
  rb_require("date");

  // Get references classes needed for Date/Time parsing
  rb_cDate = CONST_GET(rb_mKernel, "Date");
  rb_cDateTime = CONST_GET(rb_mKernel, "DateTime");
  rb_cTime = CONST_GET(rb_mKernel, "Time");
  rb_cBigDecimal = CONST_GET(rb_mKernel, "BigDecimal");

  rb_funcall(rb_mKernel, rb_intern("require"), 1, rb_str_new2("data_objects"));

#ifdef RUBY_LESS_THAN_186
  ID_NEW_DATE = rb_intern("new0");
#else
  ID_NEW_DATE = rb_intern("new!");
#endif
  ID_RATIONAL = rb_intern("Rational");
  ID_LOGGER = rb_intern("logger");
  ID_DEBUG = rb_intern("debug");
  ID_LEVEL = rb_intern("level");

  // Get references to the DataObjects module and its classes
  mDO = CONST_GET(rb_mKernel, "DataObjects");
  cDO_Quoting = CONST_GET(mDO, "Quoting");
  cDO_Connection = CONST_GET(mDO, "Connection");
  cDO_Command = CONST_GET(mDO, "Command");
  cDO_Result = CONST_GET(mDO, "Result");
  cDO_Reader = CONST_GET(mDO, "Reader");

  // Initialize the DataObjects::Sqlite3 module, and define its classes
  mSqlite3 = rb_define_module_under(mDO, "Sqlite3");

  eSqlite3Error = rb_define_class("Sqlite3Error", rb_eStandardError);

  cConnection = SQLITE3_CLASS("Connection", cDO_Connection);
  rb_define_method(cConnection, "initialize", cConnection_initialize, 1);
  rb_define_method(cConnection, "dispose", cConnection_dispose, 0);

  cCommand = SQLITE3_CLASS("Command", cDO_Command);
  rb_include_module(cCommand, cDO_Quoting);
  rb_define_method(cCommand, "set_types", cCommand_set_types, 1);
  rb_define_method(cCommand, "execute_non_query", cCommand_execute_non_query, -1);
  rb_define_method(cCommand, "execute_reader", cCommand_execute_reader, -1);
  rb_define_method(cCommand, "quote_boolean", cCommand_quote_boolean, 1);
  rb_define_method(cCommand, "quote_string", cCommand_quote_string, 1);

  cResult = SQLITE3_CLASS("Result", cDO_Result);

  cReader = SQLITE3_CLASS("Reader", cDO_Reader);
  rb_define_method(cReader, "close", cReader_close, 0);
  rb_define_method(cReader, "next!", cReader_next, 0);
  rb_define_method(cReader, "values", cReader_values, 0);
  rb_define_method(cReader, "fields", cReader_fields, 0);
  rb_define_method(cReader, "field_count", cReader_field_count, 0);
  rb_define_method(cReader, "row_count", cReader_row_count, 0);

}

开发者ID:Bluejade，项目名称:rots_consumer，代码行数:58，代码来源:do_sqlite3_ext.c

示例5: init_kgio_tryopen

void init_kgio_tryopen(void)
{
	VALUE mKgio = rb_define_module("Kgio");
	VALUE mPipeMethods = rb_const_get(mKgio, rb_intern("PipeMethods"));
	VALUE cFile;
	VALUE tmp;
	VALUE *ptr;
	long len;

	id_path = rb_intern("path");
	id_for_fd = rb_intern("for_fd");
	id_to_path = rb_intern("to_path");

	/*
	 * Document-class: Kgio::File
	 *
	 * This subclass of the core File class adds the "tryopen" singleton
	 * method for opening files.  A single "tryopen" and check for the
	 * return value may be used to avoid unnecessary stat(2) syscalls
	 * or File.open exceptions when checking for the existence of a file
	 * and opening it.
	 */
	cFile = rb_define_class_under(mKgio, "File", rb_cFile);
	rb_define_singleton_method(cFile, "tryopen", s_tryopen, -1);
	rb_include_module(cFile, mPipeMethods);

	if (!rb_funcall(cFile, rb_intern("method_defined?"), 1,
	                ID2SYM(id_to_path)))
		rb_define_alias(cFile, "to_path", "path");

	errno2sym = st_init_numtable();
	tmp = rb_funcall(rb_mErrno, rb_intern("constants"), 0);
	ptr = RARRAY_PTR(tmp);
	len = RARRAY_LEN(tmp);
	for (; --len >= 0; ptr++) {
		VALUE error;
		ID const_id;

		switch (TYPE(*ptr)) {
		case T_SYMBOL: const_id = SYM2ID(*ptr); break;
		case T_STRING: const_id = rb_intern(RSTRING_PTR(*ptr)); break;
		default: rb_bug("constant not a symbol or string");
		}

		error = rb_const_get(rb_mErrno, const_id);
		if ((TYPE(error) != T_CLASS) ||
		    !rb_const_defined(error, rb_intern("Errno")))
			continue;

		error = rb_const_get(error, rb_intern("Errno"));
		switch (TYPE(error)) {
		case T_FIXNUM:
		case T_BIGNUM:
			st_insert(errno2sym, (st_data_t)NUM2INT(error),
			          ID2SYM(const_id));
		}
	}
}

开发者ID:HeapsOfRam，项目名称:Starter，代码行数:58，代码来源:tryopen.c

示例6: init_ruby_class

void
init_ruby_class()
{
#if 0
  // For documentation using YARD
  VALUE opencv = rb_define_module("OpenCV");
  VALUE cvseq = rb_define_class_under(opencv, "CvSeq");
  VALUE curve = rb_define_module_under(opencv, "Curve");
  VALUE pointset = rb_define_module_under(opencv, "PointSet");
#endif

  if (rb_klass)
    return;

  VALUE opencv = rb_module_opencv();
  VALUE cvseq = cCvSeq::rb_class();
  VALUE curve = mCurve::rb_module();
  VALUE pointset = mPointSet::rb_module();

  rb_klass = rb_define_class_under(opencv, "CvContour", cvseq);
  rb_include_module(rb_klass, curve);
  rb_include_module(rb_klass, pointset);

  rb_define_alloc_func(rb_klass, rb_allocate);

  VALUE approx_option = rb_hash_new();
  rb_define_const(rb_klass, "APPROX_OPTION", approx_option);
  rb_hash_aset(approx_option, ID2SYM(rb_intern("method")), INT2FIX(CV_POLY_APPROX_DP));
  rb_hash_aset(approx_option, ID2SYM(rb_intern("accuracy")), rb_float_new(1.0));
  rb_hash_aset(approx_option, ID2SYM(rb_intern("recursive")), Qfalse);
  
  rb_define_method(rb_klass, "initialize", RUBY_METHOD_FUNC(rb_initialize), -1);
  rb_define_method(rb_klass, "rect", RUBY_METHOD_FUNC(rb_rect), 0);
  rb_define_method(rb_klass, "color", RUBY_METHOD_FUNC(rb_color), 0);
  rb_define_method(rb_klass, "color=", RUBY_METHOD_FUNC(rb_set_color), 1);
  rb_define_method(rb_klass, "reserved", RUBY_METHOD_FUNC(rb_reserved), 0);
  rb_define_method(rb_klass, "approx_poly", RUBY_METHOD_FUNC(rb_approx_poly), -1);
  rb_define_alias(rb_klass, "approx", "approx_poly");
  rb_define_method(rb_klass, "bounding_rect", RUBY_METHOD_FUNC(rb_bounding_rect), 0);
  rb_define_method(rb_klass, "create_tree", RUBY_METHOD_FUNC(rb_create_tree), -1);
  rb_define_method(rb_klass, "in?", RUBY_METHOD_FUNC(rb_in_q), 1);
  rb_define_method(rb_klass, "measure_distance", RUBY_METHOD_FUNC(rb_measure_distance), 1);
  rb_define_method(rb_klass, "point_polygon_test", RUBY_METHOD_FUNC(rb_point_polygon_test), 2);
  rb_define_method(rb_klass, "match_shapes", RUBY_METHOD_FUNC(rb_match_shapes), -1);
}

开发者ID:amalc，项目名称:ruby-opencv，代码行数:45，代码来源:cvcontour.cpp

示例7: Init_Result

void
Init_Result (VALUE mXmms)
{
	cResult = rb_define_class_under (mXmms, "Result", rb_cObject);

	/* ugh, we have to define the "new" method,
	 * so we can remove it again :(
	 */
	rb_define_singleton_method (cResult, "new", NULL, 0);
	rb_undef_method (rb_singleton_class (cResult), "new");

	rb_define_method (cResult, "notifier", c_notifier_set, 0);
	rb_define_method (cResult, "wait", c_wait, 0);
	rb_define_method (cResult, "value", c_value_get, 0);
	rb_define_method (cResult, "error?", c_is_error, 0);
	rb_define_method (cResult, "error", c_get_error, 0);

	cBroadcastResult = rb_define_class_under (mXmms,
	                                          "BroadcastResult",
	                                          cResult);
	rb_define_method (cBroadcastResult, "disconnect", c_disconnect, 0);

	cSignalResult = rb_define_class_under (mXmms, "SignalResult",
	                                       cResult);
	rb_define_method (cSignalResult, "disconnect", c_disconnect, 0);

	eResultError = rb_define_class_under (cResult, "ResultError",
	                                      rb_eStandardError);
	eValueError = rb_define_class_under (cResult, "ValueError",
	                                     eResultError);

	cDict = rb_define_class_under (mXmms, "Dict", rb_cObject);

#ifdef HAVE_RB_PROTECT_INSPECT
	rb_define_method (cDict, "inspect", c_dict_inspect, 0);
#endif /* HAVE_RB_PROTECT_INSPECT */

	rb_define_method (cDict, "size", c_dict_size, 0);
	rb_define_method (cDict, "empty?", c_dict_empty, 0);
	rb_define_method (cDict, "[]", c_dict_aref, 1);
	rb_define_method (cDict, "has_key?", c_dict_has_key, 1);
	rb_define_method (cDict, "each", c_dict_each, 0);
	rb_define_method (cDict, "each_key", c_dict_each_key, 0);
	rb_define_method (cDict, "each_value", c_dict_each_value, 0);

	rb_define_alias (cDict, "length", "size");
	rb_define_alias (cDict, "include?", "has_key?");
	rb_define_alias (cDict, "key?", "has_key?");
	rb_define_alias (cDict, "member?", "has_key?");
	rb_define_alias (cDict, "each_pair", "each");

	rb_include_module (cDict, rb_mEnumerable);

	cRawDict = rb_define_class_under (mXmms, "RawDict", cDict);

	rb_define_method (cRawDict, "to_propdict", c_raw_dict_to_propdict, -1);
}

开发者ID:vdust，项目名称:xmms2-devel，代码行数:57，代码来源:rb_result.c

示例8: rb_grn_init_double_array_trie_cursor

void
rb_grn_init_double_array_trie_cursor (VALUE mGrn)
{
    rb_cGrnDoubleArrayTrieCursor =
        rb_define_class_under(mGrn, "DoubleArrayTrieCursor", rb_cGrnTableCursor);

    rb_include_module(rb_cGrnDoubleArrayTrieCursor,
                      rb_mGrnTableCursorKeySupport);
}

开发者ID:keitahaga，项目名称:rroonga，代码行数:9，代码来源:rb-grn-double-array-trie-cursor.c

示例9: Init_ct_move

VALUE
Init_ct_move(void)
{
  cCtMove = rb_define_class("CtMove", rb_cObject);
  rb_include_module(cCtMove, rb_mComparable);
  rb_define_method(cCtMove, "inspect", ct_move_inspect_rb, 0);
  rb_define_method(cCtMove, "<=>", ct_move_compare_rb, 1);
  return cCtMove;
}

开发者ID:steveortiz，项目名称:chess_toolkit，代码行数:9，代码来源:ct_move_rb.c

示例10: _init_type_array

void _init_type_array()
{
    rb_cTypeArray = rb_define_class("TypeArray", rb_cObject);
    rb_include_module(rb_cTypeArray, rb_mEnumerable);

    rb_type_array_intern_aget = rb_intern("[]");
    rb_type_array_intern_aset = rb_intern("[]=");
    rb_type_array_intern_superclass = rb_intern("superclass");

    rb_cInt8Array = rb_define_class("Int8Array", rb_cTypeArray);
    rb_cUInt8Array = rb_define_class("UInt8Array", rb_cTypeArray);
    rb_cInt16Array = rb_define_class("Int16Array", rb_cTypeArray);
    rb_cUInt16Array = rb_define_class("UInt16Array", rb_cTypeArray);
    rb_cInt32Array = rb_define_class("Int32Array", rb_cTypeArray);
    rb_cUInt32Array = rb_define_class("UInt32Array", rb_cTypeArray);
    rb_cFloat32Array = rb_define_class("Float32Array", rb_cTypeArray);
    rb_cFloat64Array = rb_define_class("Float64Array", rb_cTypeArray);
    rb_cStructArray = rb_define_class("StructArray", rb_cTypeArray);

    rb_define_const(rb_cInt8Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(signed char)));
    rb_define_const(rb_cUInt8Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(unsigned char)));
    rb_define_const(rb_cInt16Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(short)));
    rb_define_const(rb_cUInt16Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(unsigned short)));
    rb_define_const(rb_cInt32Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(int)));
    rb_define_const(rb_cUInt32Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(unsigned int)));
    rb_define_const(rb_cFloat32Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(float)));
    rb_define_const(rb_cFloat64Array, "BYTES_PER_ELEMENT", ULONG2NUM(sizeof(double)));
    rb_define_const(rb_cStructArray, "BYTES_PER_ELEMENT", INT2NUM(0));

    rb_require("struct_type");
    rb_cStructType = rb_const_get(rb_cObject, rb_intern("StructType"));

    rb_define_singleton_method(rb_cTypeArray, "new", rb_type_array_s_new, -1);
    rb_define_singleton_method(rb_cStructArray, "new", rb_struct_array_s_new, -1);

    rb_define_method(rb_cTypeArray, "byte_length", rb_type_array_byte_length, 0);
    rb_define_method(rb_cTypeArray, "length", rb_type_array_length, 0);
    rb_define_method(rb_cTypeArray, "buffer", rb_type_array_buffer, 0);
    rb_define_method(rb_cTypeArray, "byte_offset", rb_type_array_byte_offset, 0);
    rb_define_method(rb_cTypeArray, "to_s", rb_type_array_to_s, 0);
    rb_define_method(rb_cTypeArray, "[]=", rb_type_array_aset, 2);
    rb_define_method(rb_cTypeArray, "[]", rb_type_array_aget, 1);
    rb_define_method(rb_cTypeArray, "mul", rb_type_array_mul, -1);
    rb_define_method(rb_cTypeArray, "plus", rb_type_array_plus, -1);
    rb_define_method(rb_cTypeArray, "minus", rb_type_array_minus, -1);
    rb_define_method(rb_cTypeArray, "div", rb_type_array_div, -1);
    rb_define_method(rb_cTypeArray, "eql", rb_type_array_eql, 2);
    rb_define_method(rb_cTypeArray, "each", rb_type_array_each, 0);

    rb_define_method(rb_cStructArray, "struct_type", rb_type_array_struct_type, 0);
    rb_undef(rb_cStructArray, rb_intern("mul"));
    rb_undef(rb_cStructArray, rb_intern("plus"));
    rb_undef(rb_cStructArray, rb_intern("minus"));
    rb_undef(rb_cStructArray, rb_intern("div"));
    rb_undef(rb_cStructArray, rb_intern("eql"));
}

开发者ID:methodmissing，项目名称:type_array，代码行数:56，代码来源:type_array.c

示例11: init_erlix_pid

void init_erlix_pid(VALUE erlix){
    erlix_cErlixPid=rb_define_class_under(erlix,"Pid",rb_cObject);

    rb_define_alloc_func(erlix_cErlixPid,erlix_pid_alloc);
    rb_define_method(erlix_cErlixPid,"initialize",erlix_pid_init,1);
    rb_define_method(erlix_cErlixPid,"inspect",erlix_pid_inspect,0);
    rb_define_method(erlix_cErlixPid,"etype",erlix_pid_etype,0);

    rb_include_module(erlix_cErlixPid,erlix_mErlixTerm);
}

开发者ID:KDr2，项目名称:erlix，代码行数:10，代码来源:erlix_pid.c

示例12: evilr_inherit

/* call-seq:
 *   inherit(*classes) -> self
 * 
 * Make copies of all given +classes+ as modules, and includes
 * those modules in the receiver. Raises +TypeError+ if any of the
 * +classes+ is not a Class or is not compatible with the receiver. */
static VALUE evilr_inherit(int argc, VALUE* argv, VALUE klass) {
  int i;

  for(i = 0; i < argc; i++) {
    evilr__check_compatible_classes(klass, argv[i]);
    rb_include_module(klass, evilr_to_module(argv[i]));
  }

  return klass;
}

开发者ID:jeremyevans，项目名称:evilr，代码行数:16，代码来源:evilr.c

示例13: rb_grn_init_table_key_support

void
rb_grn_init_table_key_support (VALUE mGrn)
{
    rb_mGrnTableKeySupport = rb_define_module_under(rb_cGrnTable, "KeySupport");
    rb_include_module(rb_mGrnTableKeySupport, rb_mGrnEncodingSupport);

    rb_define_method(rb_mGrnTableKeySupport, "inspect",
                     rb_grn_table_key_support_inspect, 0);

    rb_define_method(rb_mGrnTableKeySupport, "add",
                     rb_grn_table_key_support_add, -1);
    rb_define_method(rb_mGrnTableKeySupport, "id",
                     rb_grn_table_key_support_get_id, -1);
    rb_define_method(rb_mGrnTableKeySupport, "key",
                     rb_grn_table_key_support_get_key, 1);
    rb_define_method(rb_mGrnTableKeySupport, "has_key?",
                     rb_grn_table_key_support_has_key, 1);

    rb_define_method(rb_mGrnTableKeySupport, "delete",
                     rb_grn_table_key_support_delete, -1);

    rb_define_method(rb_mGrnTableKeySupport, "[]",
                     rb_grn_table_key_support_array_reference, 1);
    rb_define_method(rb_mGrnTableKeySupport, "[]=",
                     rb_grn_table_key_support_array_set, 2);

    rb_define_method(rb_mGrnTableKeySupport, "column_value",
                     rb_grn_table_key_support_get_column_value, -1);
    rb_define_method(rb_mGrnTableKeySupport, "set_column_value",
                     rb_grn_table_key_support_set_column_value, -1);

    rb_define_method(rb_mGrnTableKeySupport, "value",
                     rb_grn_table_key_support_get_value, -1);
    rb_define_method(rb_mGrnTableKeySupport, "set_value",
                     rb_grn_table_key_support_set_value, -1);

    rb_define_method(rb_mGrnTableKeySupport, "default_tokenizer",
                     rb_grn_table_key_support_get_default_tokenizer, 0);
    rb_define_method(rb_mGrnTableKeySupport, "default_tokenizer=",
                     rb_grn_table_key_support_set_default_tokenizer, 1);

    rb_define_method(rb_mGrnTableKeySupport, "normalizer",
                     rb_grn_table_key_support_get_normalizer, 0);
    rb_define_method(rb_mGrnTableKeySupport, "normalizer=",
                     rb_grn_table_key_support_set_normalizer, 1);

    rb_define_method(rb_mGrnTableKeySupport, "normalize_key?",
                     rb_grn_table_key_support_normalize_key_p, 0);

    rb_define_method(rb_mGrnTableKeySupport, "support_key?",
                     rb_grn_table_key_support_support_key_p, 0);

    rb_define_method(rb_mGrnTableKeySupport, "tokenize",
                     rb_grn_table_key_support_tokenize, -1);
}

开发者ID:rutice，项目名称:rroonga，代码行数:55，代码来源:rb-grn-table-key-support.c

示例14: init_erlix_atom

void init_erlix_atom(){
  erlix_cErlixAtom=rb_define_class("ErlixAtom",rb_cObject);

  rb_define_alloc_func(erlix_cErlixAtom,erlix_atom_alloc);
  rb_define_method(erlix_cErlixAtom,"initialize",erlix_atom_init,1);
  rb_define_method(erlix_cErlixAtom,"size",erlix_atom_size,0);
  rb_define_method(erlix_cErlixAtom,"etype",erlix_atom_etype,0);
  rb_define_method(erlix_cErlixAtom,"inspect",erlix_atom_inspect,0);

  rb_include_module(erlix_cErlixAtom,erlix_mErlixTerm);
}

开发者ID:jasonjackson，项目名称:erlix，代码行数:11，代码来源:erlix_atom.c

示例15: rb_grn_init_index_cursor

void
rb_grn_init_index_cursor (VALUE mGrn)
{
    rb_cGrnIndexCursor =
	rb_define_class_under(mGrn, "IndexCursor", rb_cGrnObject);
    rb_define_alloc_func(rb_cGrnIndexCursor, rb_grn_object_alloc);
    rb_include_module(rb_cGrnIndexCursor, rb_mEnumerable);

    rb_define_method(rb_cGrnIndexCursor, "next", rb_grn_index_cursor_next, 0);
    rb_define_method(rb_cGrnIndexCursor, "each", rb_grn_index_cursor_each, 0);
}

开发者ID:snoozer05，项目名称:rroonga，代码行数:11，代码来源:rb-grn-index-cursor.c

示例16: asteroid_s_run

static VALUE asteroid_s_run(VALUE Self, VALUE Host, VALUE Port, VALUE Module){
  char *host = StringValuePtr(Host);
  int port = FIX2INT(Port);
  
  epoll_fd = asteroid_poll_create(1024);
  if(epoll_fd == -1) runtime_error();

  struct sockaddr_in addr;
  addr.sin_family = AF_INET;
  addr.sin_port = htons(port);
  addr.sin_addr.s_addr = inet_addr(host);
  int s = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP), c, one = 1;
  if(s == -1) runtime_error();
  fcntl(s, F_SETFL, fcntl(s, F_GETFL, 0) | O_NONBLOCK);
  setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one));
  nosigpipe(s);
  if(bind(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) runtime_error();
  if(listen(s, MAX_CONNECTION) != 0) runtime_error();
  if(rb_block_given_p()) rb_yield(Qnil);
  
  VALUE Class = rb_define_class_under(Asteroid, "Server", rb_cObject);
  rb_define_method(Class, "send_data",
    asteroid_server_send_data, 1);
  rb_define_method(Class, "write_and_close",
    asteroid_server_write_and_close, 0);
  rb_include_module(Class, Module);
  // Mac OS X, Fedora needs explicit rb_thread_schedule call.
  for(running = 1; running; rb_thread_schedule()){
    socklen_t len = sizeof(addr);
    while((c = accept(s, (struct sockaddr*)&addr, &len)) != -1){
      printf("A New client connected here\n");
      fcntl(c, F_SETFL, fcntl(c, F_GETFL, 0) | O_NONBLOCK);
      asteroid_poll_event_t event;
      memset(&event, 0, sizeof(event));
      if(asteroid_poll_add(epoll_fd, &event, c) == -1) runtime_error();
      // instantiate server class which responds to client.
      VALUE Server = rb_class_new_instance(0, NULL, Class);
      rb_iv_set(Server, "@fd", rb_fix_new(c));
      rb_hash_aset(clients, rb_fix_new(c), Server);
      if(rb_respond_to(Server, rb_intern("post_init"))){
        rb_funcall(Server, rb_intern("post_init"), 0);
      }
    }
    if(dispatch() != 0) asteroid_s_stop(Asteroid);
    // You must call them to give a chance for ruby to handle system events.
    // CHECK_INTS;
  }

  rb_iterate(rb_each, clients, close_socket_proc, Qnil);
  rb_funcall(clients, rb_intern("clear"), 0);
  close(s);
  close(epoll_fd);
  return Qnil;
}

开发者ID:Govannon，项目名称:packet，代码行数:54，代码来源:asteroid.c

示例17: Init_switch

void
Init_switch() {
  cSwitch = rb_define_class_under( mTrema, "Switch", rb_cObject );
  rb_include_module( cSwitch, mLogger );

  rb_define_method( cSwitch, "run!", switch_run, 0 );
  rb_define_method( cSwitch, "send_message", switch_send_message, 1 );
  rb_define_private_method( cSwitch, "start_chibach", switch_start_chibach, 0 );

  rb_require( "trema/switch" );
}

开发者ID:TeruU，项目名称:trema，代码行数:11，代码来源:switch.c

示例18: Init_rpmmi

void
Init_rpmmi(void)
{
    rpmmiClass = rb_define_class("Mi", rb_cObject);
if (_debug)
fprintf(stderr, "==> %s() rpmmiClass 0x%lx\n", __FUNCTION__, rpmmiClass);
    rb_include_module(rpmmiClass, rb_mEnumerable);
    rb_define_singleton_method(rpmmiClass, "new", rpmmi_new, -1);
    initProperties(rpmmiClass);
    initMethods(rpmmiClass);
}

开发者ID:avokhmin，项目名称:RPM5，代码行数:11，代码来源:rpmmi-rb.c

示例19: init_erlix_uint

void init_erlix_uint(VALUE erlix){
    erlix_cErlixUInt=rb_define_class_under(erlix,"UInt",rb_cObject);

    rb_define_alloc_func(erlix_cErlixUInt,erlix_uint_alloc);
    rb_define_method(erlix_cErlixUInt,"initialize",erlix_uint_init,1);
    rb_define_method(erlix_cErlixUInt,"to_i",erlix_uint_to_fix,0);
    rb_define_method(erlix_cErlixUInt,"inspect",erlix_uint_inspect,0);
    rb_define_method(erlix_cErlixUInt,"etype",erlix_uint_etype,0);

    rb_include_module(erlix_cErlixUInt,erlix_mErlixTerm);
}

开发者ID:KDr2，项目名称:erlix，代码行数:11，代码来源:erlix_uint.c

示例20: Init_acts_as_foo

void Init_acts_as_foo() {
  ActsAsFoo = rb_define_module("ActsAsFoo");
  rb_define_method(ActsAsFoo, "foo?", rb_ActsAsFoo_foo_q, 0);
  rb_define_singleton_method(ActsAsFoo, "included", rb_ActsAsFoo_included, 1);
  
  ActsAsFoo_ClassMethods = rb_define_module_under(ActsAsFoo, "ClassMethods");
  rb_define_method(ActsAsFoo_ClassMethods, "foo?", rb_ActsAsFoo_foo_q, 0);
  
  rb_include_module(Bar, ActsAsFoo);
  // call ActsAsFoo.included(Bar) manually since rb_include_module doesn't
  rb_funcall(ActsAsFoo, rb_intern("included"), 1, Bar);
}

开发者ID:mtodd，项目名称:ruby-c，代码行数:12，代码来源:classes_and_modules_sample.c

注：本文中的rb_include_module函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rb_insert函数代码示例发布时间：2022-05-30

C++ rb_ignore_errno函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19188|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rb_include_module函数代码示例

示例1: init_kgio_connect

示例2: init_pg_result

示例3: rb_grn_init_patricia_trie_cursor

示例4: Init_do_sqlite3_ext

示例5: init_kgio_tryopen

示例6: init_ruby_class

示例7: Init_Result

示例8: rb_grn_init_double_array_trie_cursor

示例9: Init_ct_move

示例10: _init_type_array

示例11: init_erlix_pid

示例12: evilr_inherit

示例13: rb_grn_init_table_key_support

示例14: init_erlix_atom

示例15: rb_grn_init_index_cursor

示例16: asteroid_s_run

示例17: Init_switch

示例18: Init_rpmmi

示例19: init_erlix_uint

示例20: Init_acts_as_foo

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

DELPHI根据进程名强制关闭进程

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053