• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ rb函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rb函数的典型用法代码示例。如果您正苦于以下问题:C++ rb函数的具体用法?C++ rb怎么用?C++ rb使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rb函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: recurClear

//-----% Room Generation Functions %------
int recurClear(lvl *level, int h, int w, int x, int y, int doH, int showGen){

	if (h && doH == 1) recurClear(level, h-1, w, x, y,1, showGen);
	if (w) recurClear(level, h, w-1, x, y,0, showGen);

	if(rb(1,CHANCE_HIGH)==1)
		level->nodeSet(y+h,x+w, '$');
	else if(rb(1,CHANCE_LOW)==1)
		level->nodeSet(y+h,x+w, '*');
	else if(rb(1,CHANCE_MED)==1)
		level->nodeSet(y+h,x+w, 'o');
	else
		level->nodeSet(y+h,x+w, ' ');

	if (showGen){
		system("CLS");
		for (int i = 0; i < MAX_H; i++){
			for (int j = 0; j < MAX_W; j++){
					printf("%c", level->nodeGet(i,j));
			}
				printf("\n");
		}
	}
	return 1;
}
开发者ID:Liamgunboun,项目名称:WebSlash-Solo,代码行数:26,代码来源:LevelGen+0.02.cpp


示例2: makeStartInv

void makeStartInv(){
    FILE* invFile;
    invFile = fopen("../playerFiles/playerInv.txt","w");
    char itemName[MAX_NAME_LEN];
    fprintf(invFile,"%s %i %i\n", weaponNameGen(itemName, rb(1,3), 2),0,WEAPON_FLAG);
    fprintf(invFile,"%s %i %i\n", armorNameGen(itemName, rb(1,5), 2),0,ARMOR_FLAG);

    fclose(invFile);
}
开发者ID:Liamgunboun,项目名称:WebSlash-Solo,代码行数:9,代码来源:inv.cpp


示例3: getmarker

static int
getmarker(void) {
	int c;
	
	c = rb(0);
	if (c == -1) return -1;
	if (c!=0xff) return -1;
	c = rb(0);
	return c;
}
开发者ID:mejedi,项目名称:Gphoto2.framework,代码行数:10,代码来源:xjpeg.c


示例4: addRandToInv

void addRandToInv(int type){
    FILE* invFile;
    invFile = fopen("../playerFiles/playerInv.txt","a");
    char itemName[MAX_NAME_LEN];
    if (type == 1)
    fprintf(invFile,"%s %i %i\n", weaponNameGen(itemName, rb(1,3), MIN_WEP_ATK + 0.5 * WEP_ATK_INC),0,WEAPON_FLAG);
    else
    fprintf(invFile,"%s %i %i\n", armorNameGen(itemName, rb(1,5), MIN_ARM_DEF + 0.5 * ARM_DEF_INC),0,ARMOR_FLAG);

    fclose(invFile);
}
开发者ID:Liamgunboun,项目名称:WebSlash-Solo,代码行数:11,代码来源:inv.cpp


示例5: getlength

static int
getlength(void) {
	int x1,x2;
	
	x1 = rb(1);
	if (x1 == -1) return -1;
	x2 = rb(1);
	if (x2 == -1) return -1;
	x1 =  (x1 << 8) | x2;
	fprintf(stderr,"(%d)",x1);
	return x1;
}
开发者ID:mejedi,项目名称:Gphoto2.framework,代码行数:12,代码来源:xjpeg.c


示例6: rd

static int
rd(int len, char *data) {
	unsigned int c,i;

	for (i=0;i<len;i++) {
		c = rb(1);
		if (c == -1) return -1;
		if (c == 0xff) c = rb(1);
		if (c == -1) return -1;
		data[i] = c;
	}
	return len;
}
开发者ID:mejedi,项目名称:Gphoto2.framework,代码行数:13,代码来源:xjpeg.c


示例7: shuffleDeck

void shuffleDeck (cardType *deck) {
	cardType temp;
	int i1, i2; 
	
	for (int i = 0; i < NUM_SHUFFLES; i++) {
		i1 = rb (0, NUM_CARDS - 1);
		i2 = rb (0, NUM_CARDS - 1);
		
		temp = deck[i1];
		deck[i1] = deck[i2];
		deck[i2] = temp; 
	}
	
}
开发者ID:JamesonWeng,项目名称:Five-Card-Poker,代码行数:14,代码来源:Poker.c


示例8: move

static void		move(t_env *env, t_sort *s)
{
	if (s->dir)
		rb(env);
	else
		rrb(env);
}
开发者ID:GabrielPora,项目名称:WeThinkCode,代码行数:7,代码来源:sort.c


示例9: MyMotionState

btRigidBody* BulletPhysics::addObject(osg::MatrixTransform *root, osg::Node *node, btScalar mass, btVector3 inertia, collisionShapeType_t ctype, CollisionDataType * data,osg::Node * colShape) {
    

   btCollisionShape* cs;
   if(colShape==NULL)
     cs=GetCSFromOSG( node, ctype);
   else
     cs=GetCSFromOSG( colShape, ctype);

    MyMotionState* motion = new MyMotionState(node,root);
    cs->calculateLocalInertia( mass, inertia );
    btRigidBody::btRigidBodyConstructionInfo rb( mass, motion, cs, inertia );
    btRigidBody* body = new btRigidBody( rb );
    body->setUserPointer(data);

    //addRigidBody adds its own collision masks, changing after object creation do not update masks so objects are removed and readded in order to update masks to improve collisions performance.
    dynamicsWorld->addRigidBody( body);
    if(data->isVehicle){
      dynamicsWorld->btCollisionWorld::removeCollisionObject(body);
      dynamicsWorld->addCollisionObject(body,short( COL_VEHICLE),short(vehicleCollidesWith));
    }
    else{
      dynamicsWorld->btCollisionWorld::removeCollisionObject(body);
      dynamicsWorld->addCollisionObject(body,short( COL_OBJECTS),short(objectsCollidesWith));
    }

 

    return( body );

}
开发者ID:perezsolerj,项目名称:underwater_simulation,代码行数:31,代码来源:BulletPhysics.cpp


示例10: main

int main(int argc, char ** argv)
{
	try
	{
		Int64 x1 = std::numeric_limits<Int64>::min();
		Int64 x2 = 0;
		std::string s;

		std::cerr << static_cast<Int64>(x1) << std::endl;
		
		{
			DB::WriteBufferFromString wb(s);
			DB::writeIntText(x1, wb);
		}

		std::cerr << s << std::endl;

		{
			DB::ReadBufferFromString rb(s);
			DB::readIntText(x2, rb);
		}

		std::cerr << static_cast<Int64>(x2) << std::endl;
	}
	catch (const DB::Exception & e)
	{
		std::cerr << e.what() << ", " << e.displayText() << std::endl;
		return 1;
	}

	return 0;
}
开发者ID:Aahart911,项目名称:ClickHouse,代码行数:32,代码来源:read_write_int.cpp


示例11: lt

void ofxMesh::addFace(ofRectangle r) {
    ofVec2f lt(r.x,r.y);
    ofVec2f rt(r.x+r.width,r.y);
    ofVec2f rb(r.x+r.width,r.y+r.height);
    ofVec2f lb(r.x,r.y+r.height);
    addFace(lt,lb,rb,rt);
}
开发者ID:daitomanabe,项目名称:ofxMesh,代码行数:7,代码来源:ofxMesh.cpp


示例12: readCSV

void DataTypeArray::deserializeTextCSV(IColumn & column, ReadBuffer & istr, const FormatSettings & settings) const
{
    String s;
    readCSV(s, istr, settings.csv);
    ReadBufferFromString rb(s);
    deserializeText(column, rb, settings);
}
开发者ID:filimonov,项目名称:ClickHouse,代码行数:7,代码来源:DataTypeArray.cpp


示例13: on_draw

    virtual void on_draw()
    {
        int width = rbuf_window().width();
        int height = rbuf_window().height();

        typedef agg::scanline_u8_am<agg::alpha_mask_gray8> scanline_type;
        typedef agg::renderer_base<agg::pixfmt_bgr24> ren_base;
        typedef agg::renderer_scanline_aa_solid<ren_base> renderer;

        agg::pixfmt_bgr24 pixf(rbuf_window());
        ren_base rb(pixf);
        renderer r(rb);

        scanline_type sl(g_alpha_mask);
        rb.clear(agg::rgba8(255, 255, 255));

        agg::trans_affine mtx;
        mtx *= agg::trans_affine_translation(-g_base_dx, -g_base_dy);
        mtx *= agg::trans_affine_scaling(g_scale, g_scale);
        mtx *= agg::trans_affine_rotation(g_angle + agg::pi);
        mtx *= agg::trans_affine_skewing(g_skew_x/1000.0, g_skew_y/1000.0);
        mtx *= agg::trans_affine_translation(width/2, height/2);

        agg::conv_transform<agg::path_storage, agg::trans_affine> trans(g_path, mtx);

        agg::render_all_paths(g_rasterizer, sl, r, trans, g_colors, g_path_idx, g_npaths);
    }
开发者ID:asmboom,项目名称:PixelFarm,代码行数:27,代码来源:alpha_mask.cpp


示例14: loadTestData

void 
ResourceBundleTest::TestGetLocaleByType(void) 
{
    const struct {
        const char *requestedLocale;
        const char *resourceKey;
        const char *validLocale;
        const char *actualLocale;
    } test[] = {
        { "te_IN_BLAH", "string_only_in_te_IN", "te_IN", "te_IN" },
        { "te_IN_BLAH", "string_only_in_te", "te_IN", "te" },
        { "te_IN_BLAH", "string_only_in_Root", "te_IN", "root" },
        { "te_IN_BLAH_01234567890_01234567890_01234567890_01234567890_01234567890_01234567890", "array_2d_only_in_Root", "te_IN", "root" },
        { "[email protected]=euro", "array_2d_only_in_te_IN", "te_IN", "te_IN" },
        { "[email protected]=thai;collation=phonebook", "array_2d_only_in_te", "te_IN", "te" }
    };
    
    UErrorCode status = U_ZERO_ERROR;
    
    const char* testdatapath = loadTestData(status);
    int32_t i = 0;
    Locale locale;
    
    if(U_FAILURE(status))
    {
        dataerrln("Could not load testdata.dat %s\n", u_errorName(status));
        return;
    }
    
    for(i = 0; i < (int32_t)(sizeof(test)/sizeof(test[0])); i++) {
        ResourceBundle rb(testdatapath, test[i].requestedLocale, status);
        if(U_FAILURE(status))
        {
            err("Could not open resource bundle %s (error %s)\n", test[i].requestedLocale, u_errorName(status));
            status = U_ZERO_ERROR;
            continue;
        }
        
        ResourceBundle res = rb.get(test[i].resourceKey, status);
        if(U_FAILURE(status))
        {
            err("Couldn't find the key %s. Error: %s\n", test[i].resourceKey, u_errorName(status));
            status = U_ZERO_ERROR;
            continue;
        }
        
        locale = res.getLocale(ULOC_REQUESTED_LOCALE, status);
        if(locale != Locale::getDefault()) {
            err("Expected requested locale to be %s. Got %s\n", test[i].requestedLocale, locale.getName());
        }
        locale = res.getLocale(ULOC_VALID_LOCALE, status);
        if(strcmp(locale.getName(), test[i].validLocale) != 0) {
            err("Expected valid locale to be %s. Got %s\n", test[i].requestedLocale, locale.getName());
        }
        locale = res.getLocale(ULOC_ACTUAL_LOCALE, status);
        if(strcmp(locale.getName(), test[i].actualLocale) != 0) {
            err("Expected actual locale to be %s. Got %s\n", test[i].requestedLocale, locale.getName());
        }
    }
}
开发者ID:LittoCats,项目名称:OT_4010D,代码行数:60,代码来源:restest.cpp


示例15: draw_dashes_draft

    //------------------------------------------------------------------------
    void draw_dashes_draft()
    {
        pixfmt pixf(rbuf_window());
        base_renderer rb(pixf);
        primitives_renderer prim(rb);
        outline_rasterizer ras(prim);

        int i;
        for(i = 0; i < m_graph.get_num_edges(); i++)
        {
            graph::edge e  = m_graph.get_edge(i);
            graph::node n1 = m_graph.get_node(e.node1, width(), height());
            graph::node n2 = m_graph.get_node(e.node2, width(), height());
            curve c(n1.x, n1.y, n2.x, n2.y);
            dash_stroke_draft<curve> s(c, 6.0, 3.0, m_width.value());

            int r = rand() & 0x7F;
            int g = rand() & 0x7F;
            int b = rand() & 0x7F;
            int a = 255;
            if(m_translucent.status()) a = 80;
            prim.line_color(agg::srgba8(r, g, b, a));
            ras.add_path(s);
        }
    }
开发者ID:Bashakov,项目名称:agg,代码行数:26,代码来源:graph_test.cpp


示例16: generate_alpha_mask

    template<class VertexSource> void generate_alpha_mask(VertexSource& vs)
    {
        unsigned cx = (unsigned)width();
        unsigned cy = (unsigned)height();

        delete [] m_alpha_buf;
        m_alpha_buf = new unsigned char[cx * cy];
        m_alpha_mask_rbuf.attach(m_alpha_buf, cx, cy, cx);

        typedef agg::renderer_base<agg::pixfmt_gray8> ren_base;
        typedef agg::renderer_scanline_aa_solid<ren_base> renderer;

        agg::pixfmt_gray8 pixf(m_alpha_mask_rbuf);
        ren_base rb(pixf);
        renderer ren(rb);

        start_timer();
        if(m_operation.cur_item() == 0)
        {
            rb.clear(agg::gray8(0));
            ren.color(agg::gray8(255));
        }
        else 
        {
            rb.clear(agg::gray8(255));
            ren.color(agg::gray8(0));
        }
        m_ras.add_path(vs);
        agg::render_scanlines(m_ras, m_sl, ren);
        double t1 = elapsed_time();

        char buf[100];
        sprintf(buf, "Generate AlphaMask: %.3fms", t1);
        draw_text(250, 20, buf);
    }
开发者ID:GordonSmith,项目名称:agg,代码行数:35,代码来源:alpha_mask3.cpp


示例17: main

int main()
{
	init_random();

	m_buffer_t rb(64);
	constexpr std::size_t n_readers = 2;
	m_reader_t rd[n_readers] = { rb, rb };
	rb.mlock();

	constexpr std::size_t max = 10000;
	std::vector<m_type> random_numbers(max + 1);
	for(std::size_t count = 0; count < max; ++count)
	{
		random_numbers[count] = random_number(rb.maximum_eventual_write_space() - 1) + 1;
	}
	random_numbers[max] = 0;

	try
	{
		std::thread t1(write_messages, &rb, random_numbers);
		std::thread t2(read_messages, rd);
		std::thread t3(read_messages, rd + 1);
		t1.join(); t2.join(); t3.join();
	}
	catch(const char* s)
	{
		std::cerr << s << std::endl;
		return 1;
	}

	return 0;
}
开发者ID:efargas,项目名称:ringbuffer,代码行数:32,代码来源:test_par.cpp


示例18: skipdata

static int
skipdata(int len, int suppress) {
	int x,i;

	for (i=0;i<len;i++) {
		x = rb(suppress);
		if (x == -1)
			return x;
		if (x == 0xff) {
			x = rb(suppress);
			if (x == -1)
				return x;
		}
	}
	return 1;
}
开发者ID:mejedi,项目名称:Gphoto2.framework,代码行数:16,代码来源:xjpeg.c


示例19: addRoom

int addRoom(lvl *level, int showGen, room *rooms, int tries){
	int x = rb(1, MAX_W-RM_MAXX-2);
	int y = rb(1, MAX_H-RM_MAXY-2);
	int w = rb(3, RM_MAXX);
	int h = rb(3, RM_MAXY);

	if (validRoom(level, h+2, w+2, x-2, y-2, 1, showGen)){
		rooms->setPoints(x,y,x+w,y+h);
		recurClear(level, h, w, x, y, 1, showGen);
		return (1);
	}
	else if(tries<=30){
		return (addRoom(level, showGen, rooms, ++tries));
	}
	return 0;
}
开发者ID:Liamgunboun,项目名称:WebSlash-Solo,代码行数:16,代码来源:LevelGen+0.02.cpp


示例20: build_class_scope

void ReBindRefsPass::run_pass(
    DexStoresVector& stores, ConfigFiles& cfg, PassManager& mgr) {
  Scope scope = build_class_scope(stores);
  Rebinder rb(scope, mgr);
  rb.rewrite_refs();
  rb.print_stats();
}
开发者ID:RyanFu,项目名称:redex,代码行数:7,代码来源:ReBindRefs.cpp



注:本文中的rb函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ rb_ary_entry函数代码示例发布时间:2022-05-30
下一篇:
C++ ray函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap