本文整理汇总了C++中raiseException函数的典型用法代码示例。如果您正苦于以下问题:C++ raiseException函数的具体用法?C++ raiseException怎么用?C++ raiseException使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了raiseException函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: performPop
int performPop(int X, int flagX) {
char * value;
Exception e;
Address T = translateAddress(getInteger(reg[SP_REG]));
if (T.page == -1 && T.word == -1) return 0;
switch (flagX) {
case REG:
e = isRegisterInaccessible(X);
if (e.code != EX_NONE) {
raiseException(e);
return 0;
}
value = getWordFromAddress(T);
strcpy(reg[X], value);
storeInteger(reg[SP_REG], getInteger(reg[SP_REG]) - 1);
return 1;
break;
case IP:
raiseException(newException(EX_ILLOPERAND, "Illegal operand IP. Cannot alter readonly register", 0));
return 0;
break;
case EFR:
raiseException(newException(EX_ILLOPERAND, "Illegal operand EFR. Cannot alter readonly register", 0));
return 0;
break;
default:
raiseException(newException(EX_ILLOPERAND, "Illegal Operand", 0));
return 0;
break;
}
}
开发者ID:lenywv,项目名称:xsm,代码行数:31,代码来源:utility.c
示例2: translate
struct address translate(int virtual_addr) {
if (mode == USER_MODE) {
struct address resultant_addr;
int page_entry;
resultant_addr.page_no = -1;
resultant_addr.word_no = -1;
if (getType(reg[PTBR_REG]) == TYPE_STR) {
raiseException(newException(EX_ILLMEM, "Illegal Register Value.\n", 0));
return resultant_addr;
}
page_entry = getInteger(reg[PTBR_REG]) + (virtual_addr / PAGE_SIZE) * 2;
if (page[(page_entry+ 1 ) / PAGE_SIZE].word[(page_entry + 1) % PAGE_SIZE][1] == VALID ) {
resultant_addr.page_no = getInteger(page[page_entry / PAGE_SIZE].word[page_entry % PAGE_SIZE] );
resultant_addr.word_no = virtual_addr % PAGE_SIZE;
page[(page_entry + 1) / PAGE_SIZE].word[(page_entry + 1) % PAGE_SIZE][0] = REFERENCED;
}
else raiseException(newException(EX_PAGEFAULT, "Page Fault.\n", virtual_addr / PAGE_SIZE));
return resultant_addr;
} else {
struct address resultant_addr;
resultant_addr.page_no = virtual_addr / PAGE_SIZE;
resultant_addr.word_no = virtual_addr % PAGE_SIZE;
return resultant_addr;
}
}
开发者ID:lenywv,项目名称:xsm,代码行数:25,代码来源:utility.c
示例3: performIRET
int performIRET() {
if (mode == USER_MODE) {
raiseException(newException(EX_ILLINSTR, "Call to Privileged Instruction IRET in USER mode", 0));
return 0;
}
Exception e = isSafeState2();
if (e.code != EX_NONE) {
raiseException(e);
return 0;
}
mode = USER_MODE;
Address T = translateAddress(getInteger(reg[SP_REG]));
if (T.page == -1 && T.word == -1) {
mode = KERNEL_MODE;
return 0;
}
char * value = getWordFromAddress(T);
if (getType(value) == TYPE_STR) {
mode = KERNEL_MODE;
raiseException(newException(EX_ILLMEM, "Illegal return address", 0));
return 0;
}
int result = getInteger(value);
if (result < 0 || result >= getInteger(reg[PTLR_REG]) * PAGE_SIZE) {
mode = KERNEL_MODE;
raiseException(newException(EX_ILLMEM, "Illegal return address", 0));
return 0;
}
storeInteger(reg[IP_REG], result);
storeInteger(reg[SP_REG], getInteger(reg[SP_REG]) - 1);
return 1;
}
开发者ID:lenywv,项目名称:xsm,代码行数:32,代码来源:utility.c
示例4: performIN
int performIN(int X, int flagX) {
int value;
Exception e;
switch (flagX) {
case REG:
case SP:
case BP:
case PTBR:
case PTLR:
e = isRegisterInaccessible(X);
if (e.code != EX_NONE) {
raiseException(e);
return 0;
}
break;
case IP:
raiseException(newException(EX_ILLOPERAND, "Illegal operand IP. Cannot alter readonly register", 0));
return 0;
case EFR:
raiseException(newException(EX_ILLOPERAND, "Illegal operand EFR. Cannot alter readonly register", 0));
return 0;
break;
default:
raiseException(newException(EX_ILLOPERAND, "Illegal operand.", 0));
return 0;
break;
}
char input[WORD_SIZE];
scanf("%s", input);
FLUSH_STDIN(input);
input[WORD_SIZE - 1] = '\0';
strcpy(reg[X], input);
return 1;
}
开发者ID:lenywv,项目名称:xsm,代码行数:34,代码来源:utility.c
示例5: getInstruction
/*
* Gets the instruction pointed by IP, to the argument
* Return 0 on success
* Returns -1 on error after setting IP to exception handler
*/
int getInstruction(char *instruction) {
struct address translatedAddr;
int len;
bzero(instruction, WORD_SIZE * WORDS_PER_INSTR);
if (getType(reg[IP_REG]) == TYPE_STR) {
raiseException(newException(EX_ILLMEM, "Illegal IP value. Not an address.\n", 0));
return -1;
}
if (mode == USER_MODE && getType(reg[PTLR_REG]) == TYPE_STR) {
raiseException(newException(EX_ILLMEM, "Illegal PTLR value.\n", 0));
return -1;
}
if (getInteger(reg[IP_REG]) < 0 || getInteger(reg[IP_REG]) + 1 >= SIZE_OF_MEM) {
raiseException(newException(EX_ILLMEM, "IP Register value out of bounds.\n", 0));
return -1;
}
if (mode == USER_MODE) {
if (getInteger(reg[IP_REG]) < 0 || getInteger(reg[IP_REG]) + 1 >= getInteger(reg[PTLR_REG]) * PAGE_SIZE) {
printf("%d", getInteger(reg[IP_REG]));
raiseException(newException(EX_ILLOPERAND, "Illegal IP Access.\n", 0));
return -1;
}
}
translatedAddr = translate(getInteger(reg[IP_REG]));
if (translatedAddr.page_no == -1 && translatedAddr.word_no == -1) return -1;
strcpy(instruction, page[translatedAddr.page_no].word[translatedAddr.word_no]);
translatedAddr = translate(getInteger(reg[IP_REG]) + 1);
if (translatedAddr.page_no == -1 && translatedAddr.word_no == -1) return -1;
len = strlen(instruction);
instruction[len]=' ';
instruction[len + 1]='\0';
strcat(instruction, page[translatedAddr.page_no].word[translatedAddr.word_no]);
return 0;
}
开发者ID:lenywv,项目名称:xsm,代码行数:39,代码来源:utility.c
示例6: performPush
int performPush(int X, int flagX) {
Address T = translateAddress(getInteger(reg[SP_REG]) + 1);
if (T.page == -1 && T.word == -1) return 0;
Exception e;
switch (flagX) {
case REG:
case SP:
case BP:
case IP:
case PTBR:
case PTLR:
case EFR:
e = isRegisterInaccessible(X);
if (e.code != EX_NONE) {
raiseException(e);
return 0;
}
if (storeWordToAddress(T, reg[X])) {
storeInteger(reg[SP_REG], getInteger(reg[SP_REG]) + 1);
return 1;
} else return 0;
break;
default:
raiseException(newException(EX_ILLOPERAND, "Illegal Operand", 0));
return 0;
break;
}
}
开发者ID:lenywv,项目名称:xsm,代码行数:29,代码来源:utility.c
示例7: performINT
int performINT(int X, int flagX) {
if (mode == KERNEL_MODE) {
raiseException(newException(EX_ILLINSTR, "Cannot call INT in KERNEL Mode", 0));
return 0;
}
if (flagX != NUM) {
raiseException(newException(EX_ILLOPERAND, "Illegal operand", 0));
return;
}
invokeInterrupt(X);
return 1;
}
开发者ID:lenywv,项目名称:xsm,代码行数:12,代码来源:utility.c
示例8: N_NIMCALL
N_NIMCALL(void, send_518209)(Socketimpl513407* socket, NimStringDesc* data, NU8 flags) {
NI sent;
{ sent = send_517716(socket, ((void*) (data->data)), (data ? data->Sup.len : 0));
{
NI32 lasterror;
if (!(sent < ((NI) 0))) goto LA3;
lasterror = oslasterror_115833();
{
NIM_BOOL LOC7;
LOC7 = 0;
LOC7 = isdisconnectionerror_513481(flags, lasterror);
if (!LOC7) goto LA8;
goto BeforeRet;
}
LA8: ;
socketerror_514027(socket, ((NI) -1), NIM_FALSE, lasterror);
}
LA3: ;
{
Oserror3433* e_518220;
NimStringDesc* LOC14;
if (!!((sent == (data ? data->Sup.len : 0)))) goto LA12;
e_518220 = 0;
e_518220 = (Oserror3433*) newObj((&NTI115812), sizeof(Oserror3433));
(*e_518220).Sup.Sup.Sup.m_type = (&NTI3433);
LOC14 = 0;
LOC14 = (*e_518220).Sup.Sup.message; (*e_518220).Sup.Sup.message = copyStringRC1(((NimStringDesc*) &TMP4996));
if (LOC14) nimGCunrefNoCycle(LOC14);
raiseException((Exception*)e_518220, "OSError");
}
LA12: ;
}BeforeRet: ;
}
开发者ID:jlp765,项目名称:csources,代码行数:33,代码来源:stdlib_net.c
示例9: N_NIMCALL
N_NIMCALL(NimStringDesc**, nstTake)(Stringtableobj140209* t, NimStringDesc* key) {
NimStringDesc** result;
NI index_140432;
result = 0;
index_140432 = rawget_140406(t, key);
{
if (!(((NI) 0) <= index_140432)) goto LA3;
result = (&(*t).data->data[index_140432].Field1);
}
goto LA1;
LA3: ;
{
Keyerror3648* e_140603;
NimStringDesc* LOC6;
e_140603 = 0;
e_140603 = (Keyerror3648*) newObj((&NTI181804), sizeof(Keyerror3648));
(*e_140603).Sup.Sup.Sup.m_type = (&NTI3648);
LOC6 = 0;
LOC6 = rawNewString(key->Sup.len + 15);
appendString(LOC6, ((NimStringDesc*) &TMP1551));
appendString(LOC6, key);
asgnRefNoCycle((void**) (&(*e_140603).Sup.Sup.message), LOC6);
raiseException((Exception*)e_140603, "KeyError");
}
LA1: ;
return result;
}
开发者ID:StetHD,项目名称:csources,代码行数:27,代码来源:stdlib_strtabs.c
示例10: N_NIMCALL
N_NIMCALL(Selectorkey181439*, mget_182057)(Table181466* t, int key) {
Selectorkey181439* result;
NI hc_182070;
NI index_182072;
result = 0;
hc_182070 = 0;
index_182072 = rawget_181585((*t), key, (&hc_182070));
{
if (!(((NI) 0) <= index_182072)) goto LA3;
result = (&(*t).data->data[index_182072].Field2);
}
goto LA1;
LA3: ;
{
Keyerror3851* e_182202;
NimStringDesc* LOC6;
NimStringDesc* LOC7;
e_182202 = 0;
e_182202 = (Keyerror3851*) newObj((&NTI182603), sizeof(Keyerror3851));
(*e_182202).Sup.Sup.Sup.m_type = (&NTI3851);
LOC6 = 0;
LOC7 = 0;
LOC7 = nimIntToStr(key);
LOC6 = rawNewString(LOC7->Sup.len + 15);
appendString(LOC6, ((NimStringDesc*) &TMP1111));
appendString(LOC6, LOC7);
asgnRefNoCycle((void**) (&(*e_182202).Sup.Sup.message), LOC6);
raiseException((Exception*)e_182202, "KeyError");
}
LA1: ;
return result;
}
开发者ID:JJjie,项目名称:RuCTF-2015,代码行数:32,代码来源:stdlib_tables.c
示例11: N_NIMCALL
N_NIMCALL(NI, npuParseInt)(NimStringDesc* S_23051, NI* Number_23053, NI Start_23054) {
NI Result_23055;
NI64 Res_23056;
NIM_BOOL LOC2;
NIM_BOOL LOC4;
EOverflow* E_23069;
Result_23055 = 0;
Res_23056 = 0;
Result_23055 = npuParseBiggestInt(S_23051, &Res_23056, Start_23054);
LOC2 = NIM_TRUE;
if (!(LOC2)) goto LA3;
LOC4 = (Res_23056 < (-2147483647 -1));
if (LOC4) goto LA5;
LOC4 = (2147483647 < Res_23056);
LA5: ;
LOC2 = LOC4;
LA3: ;
if (!LOC2) goto LA6;
E_23069 = 0;
E_23069 = (EOverflow*) newObj(NTI6051, sizeof(EOverflow));
(*E_23069).Sup.Sup.Sup.Sup.m_type = NTI432;
asgnRefNoCycle((void**) &(*E_23069).Sup.Sup.Sup.message, copyString(((NimStringDesc*) &TMP195656)));
raiseException((E_Base*)E_23069, "EOverflow");
goto LA1;
LA6: ;
(*Number_23053) = ((NI) (Res_23056));
LA1: ;
return Result_23055;
}
开发者ID:ddlsmurf,项目名称:Nimrod,代码行数:29,代码来源:parseutils.c
示例12: N_NIMCALL
N_NIMCALL(void, getservbyport_511233)(NU16 port, NimStringDesc* proto, Servent509610* Result) {
struct servent* s;
nimfr("getServByPort", "rawsockets.nim")
nimln(261, "rawsockets.nim");
s = getservbyport(((int) (((NI)(NU)(NU16)(((NI16)chckRange(port, ((NI16) -32768), ((NI16) 32767))))))), proto->data);
nimln(262, "rawsockets.nim");
{
Oserror3433* e_511416;
NimStringDesc* LOC5;
if (!(s == NIM_NIL)) goto LA3;
e_511416 = 0;
nimln(2265, "system.nim");
e_511416 = (Oserror3433*) newObj((&NTI116812), sizeof(Oserror3433));
(*e_511416).Sup.Sup.Sup.m_type = (&NTI3433);
nimln(2266, "system.nim");
LOC5 = 0;
LOC5 = (*e_511416).Sup.Sup.message; (*e_511416).Sup.Sup.message = copyStringRC1(((NimStringDesc*) &TMP10617));
if (LOC5) nimGCunrefNoCycle(LOC5);
nimln(262, "rawsockets.nim");
raiseException((Exception*)e_511416, "OSError");
}
LA3: ;
nimln(263, "rawsockets.nim");
unsureAsgnRef((void**) (&(*Result).name), cstrToNimstr((*s).s_name));
nimln(264, "rawsockets.nim");
unsureAsgnRef((void**) (&(*Result).aliases), cstringarraytoseq_13843((*s).s_aliases));
nimln(265, "rawsockets.nim");
(*Result).port = ((NU16) ((*s).s_port));
nimln(266, "rawsockets.nim");
unsureAsgnRef((void**) (&(*Result).proto), cstrToNimstr((*s).s_proto));
popFrame();
}
开发者ID:undecided,项目名称:csources,代码行数:32,代码来源:stdlib_rawsockets.c
示例13: absPathOfDMapContent
void DMapFileParser::parseRegularLine(
std::string file_name, std::string line, uint32_t line_nr, DeviceInfoMapPointer dmap) {
std::istringstream inStream;
DeviceInfoMap::DeviceInfo deviceInfo;
inStream.str(line);
inStream >> deviceInfo.deviceName >> deviceInfo.uri >> deviceInfo.mapFileName;
if(inStream) {
std::string absPathToDMapFile = utilities::convertToAbsolutePath(file_name);
std::string absPathToMapFile = absPathOfDMapContent(deviceInfo.mapFileName, file_name);
deviceInfo.mapFileName = absPathToMapFile;
deviceInfo.dmapFileName = absPathToDMapFile;
deviceInfo.dmapFileLineNumber = line_nr;
dmap->insert(deviceInfo);
}
else {
std::istringstream inStream2;
inStream2.str(line);
inStream2 >> deviceInfo.deviceName >> deviceInfo.uri;
if(inStream2) {
std::string absPathToDMapFile = utilities::convertToAbsolutePath(file_name);
deviceInfo.mapFileName = "";
deviceInfo.dmapFileName = absPathToDMapFile;
deviceInfo.dmapFileLineNumber = line_nr;
dmap->insert(deviceInfo);
}
else {
raiseException(file_name, line, line_nr);
}
}
}
开发者ID:ChimeraTK,项目名称:DeviceAccess,代码行数:33,代码来源:DMapFileParser.cpp
示例14: translateException
void translateException()
{
try
{
if (PyErr_Occurred()); // let the latest Python exn pass through and ignore the current one
else
throw;
}
catch(Hermes::Exceptions::NullException &e)
{
raiseNullException(&e);
}
catch(Hermes::Exceptions::LengthException &e)
{
raiseLengthException(&e);
}
catch(Hermes::Exceptions::LinearSolverException &e)
{
raiseLinearSolverException(&e);
}
catch(Hermes::Exceptions::ValueException &e)
{
raiseValueException(&e);
}
catch(Hermes::Exceptions::Exception &e)
{
raiseException(&e);
}
}
开发者ID:l-korous,项目名称:hermes-python,代码行数:29,代码来源:translate_exception.cpp
示例15: N_NIMCALL
N_LIB_PRIVATE N_NIMCALL(NimStringDesc**, nstTake)(tyObject_StringTableObj_V5PVrt9bIxZEeV7lfvqqtNg* t, NimStringDesc* key) {
NimStringDesc** result;
NI index;
result = (NimStringDesc**)0;
index = rawGet_j2b5ExM8jHC3fdJfR8v9aMw(t, key);
{
if (!(((NI) 0) <= index)) goto LA3_;
result = (&(*t).data->data[index].Field1);
}
goto LA1_;
LA3_: ;
{
tyObject_KeyError_nRD4SGrdQPt47sk7LIklpA* e;
NimStringDesc* T6_;
e = (tyObject_KeyError_nRD4SGrdQPt47sk7LIklpA*)0;
e = (tyObject_KeyError_nRD4SGrdQPt47sk7LIklpA*) newObj((&NTI_nuL5K2f5u8HXdjAg35PVfw_), sizeof(tyObject_KeyError_nRD4SGrdQPt47sk7LIklpA));
(*e).Sup.Sup.Sup.Sup.m_type = (&NTI_nRD4SGrdQPt47sk7LIklpA_);
T6_ = (NimStringDesc*)0;
T6_ = rawNewString((key ? key->Sup.len : 0) + 15);
appendString(T6_, ((NimStringDesc*) &TM_ZT9crccxweoChVXn9cHcxIXQ_7));
appendString(T6_, key);
asgnRefNoCycle((void**) (&(*e).Sup.Sup.Sup.message), T6_);
asgnRef((void**) (&(*e).Sup.Sup.Sup.parent), NIM_NIL);
raiseException((Exception*)e, "KeyError");
}
LA1_: ;
return result;
}
开发者ID:nim-lang,项目名称:csources,代码行数:28,代码来源:stdlib_strtabs.c
示例16: N_NIMCALL
N_NIMCALL(NimStringDesc*, paramstr_124809)(NI i) {
NimStringDesc* result;
Indexerror3455* e_124815;
NimStringDesc* LOC7;
{ result = 0;
{
NIM_BOOL LOC3;
LOC3 = 0;
LOC3 = (i < ((NI) (cmdCount)));
if (!(LOC3)) goto LA4;
LOC3 = (((NI) 0) <= i);
LA4: ;
if (!LOC3) goto LA5;
result = cstrToNimstr(cmdLine[(i)- 0]);
goto BeforeRet;
}
LA5: ;
e_124815 = 0;
e_124815 = (Indexerror3455*) newObj((&NTI124816), sizeof(Indexerror3455));
(*e_124815).Sup.Sup.m_type = (&NTI3455);
LOC7 = 0;
LOC7 = (*e_124815).Sup.message; (*e_124815).Sup.message = copyStringRC1(((NimStringDesc*) &TMP1146));
if (LOC7) nimGCunrefNoCycle(LOC7);
raiseException((Exception*)e_124815, "IndexError");
}BeforeRet: ;
return result;
}
开发者ID:apense,项目名称:csources,代码行数:27,代码来源:stdlib_os.c
示例17: N_NIMCALL
N_NIMCALL(struct addrinfo*, getaddrinfo_510408)(NimStringDesc* address, NU16 port, NU8 af, NU8 typ, NU8 prot) {
struct addrinfo* result;
struct addrinfo hints;
int gairesult;
NimStringDesc* LOC1;
result = 0;
memset((void*)(&hints), 0, sizeof(hints));
result = NIM_NIL;
hints.ai_family = toint_509829(af);
hints.ai_socktype = toint_509835(typ);
hints.ai_protocol = toint_509841(prot);
LOC1 = 0;
LOC1 = HEX24_6401(port);
gairesult = getaddrinfo(address->data, LOC1->data, (&hints), &result);
{
Oserror3433* e_510603;
NCSTRING LOC6;
if (!!((gairesult == ((NI32) 0)))) goto LA4;
e_510603 = 0;
e_510603 = (Oserror3433*) newObj((&NTI116812), sizeof(Oserror3433));
(*e_510603).Sup.Sup.Sup.m_type = (&NTI3433);
LOC6 = 0;
LOC6 = gai_strerror(gairesult);
asgnRefNoCycle((void**) (&(*e_510603).Sup.Sup.message), cstrToNimstr(LOC6));
raiseException((Exception*)e_510603, "OSError");
}
LA4: ;
return result;
}
开发者ID:jlp765,项目名称:csources,代码行数:29,代码来源:stdlib_rawsockets.c
示例18: raiseException
eOperandType Chipset::checkNumber(const std::string &val)
{
bool foundValue = false;
size_t i;
std::string type_only;
size_t nb_begin;
size_t nb_end;
nb_end = val.find(")");
nb_begin = val.find("(");
if (nb_begin == val.npos || nb_end == val.npos || nb_end != (val.size() - 1)
|| nb_end - nb_begin < 2)
raiseException(SyntaxException());
type_only = val.substr(0, nb_begin);
for (i = 0; i < _valuesVect.size(); i++)
{
if (type_only == _valuesVect[i].name)
{
foundValue = true;
break;
}
}
if (foundValue == false)
raiseException(SyntaxException());
std::string nb;
nb = val.substr(nb_begin + 1, (nb_end - nb_begin) - 1);
NumberType nbType = findNumberType(nb);
if (nbType == UNKNOWN)
raiseException(SyntaxException());
if (nbType == ENTIER)
{
if (_valuesVect[i].opeType >= 3)
raiseException(SyntaxException());
}
else
{
if (_valuesVect[i].opeType <= 2)
raiseException(SyntaxException());
}
return (_valuesVect[i].opeType);
}
开发者ID:lelabo-marc,项目名称:cpp_project,代码行数:46,代码来源:Chipset.cpp
示例19: stream
void Chipset::sendToRamString(const std::string &msg)
{
std::string word;
std::vector<std::string> words;
std::stringstream stream(msg);
while (std::getline(stream, word, ' '))
{
if (word.length() > 0)
words.push_back(word.c_str());
}
bool foundInstruction = false;
size_t i;
for (i = 0; i < _instVect.size(); i++)
{
if (words[0] == _instVect[i].name)
{
foundInstruction = true;
break;
}
}
if (foundInstruction == false)
raiseException(BadInstException());
if (_instVect[i].nb_param != (words.size() - 1))
raiseException(SyntaxException());
Inst *new_Instruction;
if (_instVect[i].nb_param >= 1)
{
eOperandType type = checkNumber(words[1]);
size_t nb_end = words[1].find(")");
size_t nb_begin = words[1].find("(");
std::string numberOnly = words[1].substr(nb_begin + 1, (nb_end - nb_begin) - 1);
new_Instruction = new Inst(_instVect[i].inst, numberOnly, type);
}
else
{
new_Instruction = new Inst(_instVect[i].inst);
}
if (new_Instruction->getOpCode() == EXIT)
_isExited = true;
_ram.PutInst(new_Instruction);
}
开发者ID:lelabo-marc,项目名称:cpp_project,代码行数:46,代码来源:Chipset.cpp
示例20: raiseException
bool MessageQueue::raiseAndClearException(JNIEnv* env, const char* msg) {
if (env->ExceptionCheck()) {
jthrowable exceptionObj = env->ExceptionOccurred();
env->ExceptionClear();
raiseException(env, msg, exceptionObj);
env->DeleteLocalRef(exceptionObj);
return true;
}
return false;
}
开发者ID:0359xiaodong,项目名称:platform_frameworks_base,代码行数:10,代码来源:android_os_MessageQueue.cpp
注:本文中的raiseException函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论