C++ r_socket_write函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中r_socket_write函数的典型用法代码示例。如果您正苦于以下问题：C++ r_socket_write函数的具体用法？C++ r_socket_write怎么用？C++ r_socket_write使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了r_socket_write函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: r_core_rtr_cmds

R_API int r_core_rtr_cmds (RCore *core, const char *port) {
	unsigned char buf[4097];
	RSocket *ch, *s;
	int i, ret;
	char *str;

	if (!port || port[0]=='?') {
		r_cons_printf ("Usage: .:[tcp-port]    run r2 commands for clients\n");
		return R_FALSE;
	}

	s = r_socket_new (0);
	if (!r_socket_listen (s, port, NULL)) {
		eprintf ("Error listening on port %s\n", port);
		r_socket_free (s);
		return R_FALSE;
	}

	eprintf ("Listening for commands on port %s\n", port);
	listenport = port;
	for (;;) {
		r_cons_break ((RConsBreak)http_break, core);
		ch = r_socket_accept (s);
		buf[0] = 0;
		ret = r_socket_read (ch, buf, sizeof (buf) - 1);
		if (ret>0) {
			buf[ret] = 0;
			for (i=0; buf[i]; i++)
				if (buf[i] == '\n')
					buf[i] = buf[i+1]? ';': '\0';
			if (!r_config_get_i (core->config, "scr.prompt") \
					&& !strcmp ((char*)buf, "q!"))
				break;
			str = r_core_cmd_str (core, (const char *)buf);
			if (str &&*str)  {
			r_socket_write (ch, str, strlen (str));
			} else
			r_socket_write (ch, "\n", 1);
			free (str);
		}
		if (r_cons_singleton()->breaked)
			break;
		r_socket_close (ch);
		r_cons_break_end ();
	}
	r_socket_free(s);
	r_socket_free(ch);
	return 0;
}

开发者ID:dialeth，项目名称:radare2，代码行数:49，代码来源:rtr.c

示例2: haret__read

static int haret__read(RIO *io, RIODesc *fd, ut8 *buf, int count) {
	char tmp[1024];
	int i = 0;
	ut64 off;
	st64 j;
	RSocket *s = HARET_FD (fd);

	off = io->off & -4;
	sprintf (tmp, "pdump 0x%"PFMT64x" %i\r\n", off, count+4);
	r_socket_write (s, tmp, strlen (tmp));
	r_socket_read_block (s, (unsigned char *) tmp, strlen (tmp)+1);
	j = (io->off - off)*2;
	while (i<count && j >= 0) {
		r_socket_read_block (s, (ut8*) tmp, 11);
		r_socket_read_block (s, (ut8*) tmp, 35);
		if (i+16 < count || (io->off-off) == 0) {
			tmp[35] = 0;
			i += r_hex_str2bin (tmp+j, buf+i);
			r_socket_read_block (s, (unsigned char *) tmp, 21);
		} else {
			tmp[(io->off - off)*2] = 0;
			i += r_hex_str2bin (tmp+j, buf+i);
		}
		j = 0;
	}
	haret_wait_until_prompt (s);
	return i;
}

开发者ID:Chelwin，项目名称:radare2-extras，代码行数:28，代码来源:io_haret.c

示例3: rap__read

static int rap__read(struct r_io_t *io, RIODesc *fd, ut8 *buf, int count) {
	RSocket *s = RIORAP_FD (fd);
	int ret;
	int i = (int)count;
	ut8 tmp[5];

	if (count>RMT_MAX)
		count = RMT_MAX;
	// send
	tmp[0] = RMT_READ;
	r_mem_copyendian (tmp+1, (ut8*)&count, 4, ENDIAN);
	r_socket_write (s, tmp, 5);
	r_socket_flush (s);
	// recv
	ret = r_socket_read_block (s, tmp, 5);
	if (ret != 5 || tmp[0] != (RMT_READ|RMT_REPLY)) {
		eprintf ("rap__read: Unexpected rap read reply "
			"(%d=0x%02x) expected (%d=0x%02x)\n",
			ret, tmp[0], 2, (RMT_READ|RMT_REPLY));
		return -1;
	}
	r_mem_copyendian ((ut8*)&i, tmp+1, 4, ENDIAN);
	if (i>count) {
		eprintf ("rap__read: Unexpected data size %d\n", i);
		return -1;
	}
	r_socket_read_block (s, buf, i);
	return count;
}

开发者ID:AitorATuin，项目名称:radare2，代码行数:29，代码来源:io_rap.c

示例4: r_core_rtr_pushout

R_API void r_core_rtr_pushout(RCore *core, const char *input) {
	int fd = atoi (input);
	const char *cmd = NULL;
	char *str = NULL;
	if (fd) {
		for (rtr_n = 0; rtr_host[rtr_n].fd->fd != fd \
			&& rtr_n < RTR_MAX_HOSTS; rtr_n++);
		if (!(cmd = strchr (input, ' '))) {
			eprintf ("Error\n");
			return;
		}
	} else cmd = input;

	if (!rtr_host[rtr_n].fd->fd) {
		eprintf("Error: Unknown host\n");
		return;
	}

	if (!(str = r_core_cmd_str (core, cmd))) {
		eprintf ("Error: radare_cmd_str returned NULL\n");
		return;
	}
	
	switch (rtr_host[rtr_n].proto) {
	case RTR_PROT_RAP:
		eprintf ("Error: Cannot use '=<' to a rap connection.\n");
		break;
	case RTR_PROT_TCP:
	case RTR_PROT_UDP:
	default:
		r_socket_write (rtr_host[rtr_n].fd, str, strlen (str));
		break;
	}
	free (str);
}

开发者ID:moon2l，项目名称:radare2，代码行数:35，代码来源:rtr.c

示例5: send_packet

int send_packet(libgdbr_t *g) {
	if (!g) {
		eprintf ("Initialize libgdbr_t first\n");
		return -1;
	}
	return r_socket_write (g->sock, g->send_buff, g->send_len);
}

开发者ID:XVilka，项目名称:radare2，代码行数:7，代码来源:packet.c

示例6: rap__write

static int rap__write(RIO *io, RIODesc *fd, const ut8 *buf, int count) {
	RSocket *s = RIORAP_FD (fd);
	ut8 *tmp;
	int ret;

	if (count < 1) {
		return count;
	}
	// TOOD: if count > RMT_MAX iterate !
	if (count > RMT_MAX) {
		count = RMT_MAX;
	}
	if (!(tmp = (ut8 *)malloc (count + 5))) {
		eprintf ("rap__write: malloc failed\n");
		return -1;
	}
	tmp[0] = RMT_WRITE;
	r_write_be32 (tmp + 1, count);
	memcpy (tmp + 5, buf, count);

	ret = r_socket_write (s, tmp, count + 5);
	r_socket_flush (s);
	if (r_socket_read (s, tmp, 5) != 5) { // TODO read_block?
		eprintf ("rap__write: error\n");
		ret = -1;
	} else {
		ret = r_read_be32 (tmp + 1);
		if (!ret) {
			ret = -1;
		}
	}
	free (tmp);
	return ret;
}

开发者ID:EliaGeretto，项目名称:radare2，代码行数:34，代码来源:io_rap.c

示例7: r_socket_new

// TODO: support len for binary data?
R_API char *r_core_rtr_cmds_query (RCore *core, const char *host, const char *port, const char *cmd) {
	int retries = 6;
	unsigned char buf[1024];
	char *rbuf = NULL;
	const int timeout = 0;
	RSocket *s = r_socket_new (0);
	for (;retries>0; r_sys_usleep (10*1000)) {
		if (r_socket_connect (s, host, port, R_SOCKET_PROTO_TCP, timeout))
			break;
		retries--;
	}
	if (retries>0) {
		rbuf = strdup ("");
		r_socket_write (s, (void*)cmd, strlen (cmd));
		//r_socket_write (s, "px\n", 3);
		for (;;) {
			int ret = r_socket_read (s, buf, sizeof (buf));
			if (ret<1) break;
			buf[ret] = 0;
			rbuf = r_str_concat (rbuf, (const char *)buf);
		}
	} else {
		eprintf ("Cannot connect\n");
	}
	r_socket_free (s);
	return rbuf;
}

开发者ID:dialeth，项目名称:radare2，代码行数:28，代码来源:rtr.c

示例8: rap__read

static int rap__read(RIO *io, RIODesc *fd, ut8 *buf, int count) {
	RSocket *s = RIORAP_FD (fd);
	int ret, i = (int)count;
	ut8 tmp[5];

	// XXX. if count is > RMT_MAX, just perform multiple queries
	if (count > RMT_MAX) {
		count = RMT_MAX;
	}
	// send
	tmp[0] = RMT_READ;
	r_write_be32 (tmp + 1, count);
	r_socket_write (s, tmp, 5);
	r_socket_flush (s);
	// recv
	ret = r_socket_read_block (s, tmp, 5);
	if (ret != 5 || tmp[0] != (RMT_READ | RMT_REPLY)) {
		eprintf ("rap__read: Unexpected rap read reply "
			"(%d=0x%02x) expected (%d=0x%02x)\n",
			ret, tmp[0], 2, (RMT_READ | RMT_REPLY));
		return -1;
	}
	i = r_read_at_be32 (tmp, 1);
	if (i >count) {
		eprintf ("rap__read: Unexpected data size %d\n", i);
		return -1;
	}
	r_socket_read_block (s, buf, i);
	return count;
}

开发者ID:EliaGeretto，项目名称:radare2，代码行数:30，代码来源:io_rap.c

示例9: haret__system

static int haret__system(RIO *io, RIODesc *fd, const char *command) {
	char buf;
	int off = 0;

	r_socket_write (HARET_FD (fd), (char *)command, strlen(command));
	r_socket_write (HARET_FD (fd), "\r\n", 2);
	for (;;) {
		r_socket_read_block (HARET_FD (fd), (unsigned char *)&buf, 1);
		eprintf ("%c", buf);
		switch(off) {
		case 0: if (buf == ')') off =1; break;
		case 1: if (buf == '#') return 0; else off = 0; break;
		}
	}

	return 0;
}

开发者ID:Chelwin，项目名称:radare2-extras，代码行数:17，代码来源:io_haret.c

示例10: r_core_rtr_cmd

R_API void r_core_rtr_cmd(RCore *core, const char *input) {
	char bufw[1024], bufr[8];
	const char *cmd = NULL, *cmd_output = NULL;
	int i, cmd_len, fd = atoi (input);

	if (*input==':' && !strchr (input+1, ':')) {
		r_core_cmdf (core, "o rap://%s", input);
		return;
	}
	if (fd != 0) {
		if (rtr_host[rtr_n].fd)
			for (rtr_n = 0; rtr_host[rtr_n].fd->fd != fd
				&& rtr_n < RTR_MAX_HOSTS - 1; rtr_n++);
		if (!(cmd = strchr (input, ' '))) {
			eprintf ("Error\n");
			return;
		}
	} else cmd = input;

	if (!rtr_host[rtr_n].fd){
		eprintf ("Error: Unknown host\n");
		core->num->value = 1; // fail
		return;
	}

	if (!rtr_host[rtr_n].proto == RTR_PROT_RAP){
		eprintf ("Error: Not a rap:// host\n");
		return;
	}

	core->num->value = 0; // that's fine
	if (!strlen (cmd)) {
		// just check if we can connect
		r_socket_close (rtr_host[rtr_n].fd);
		return;
	}
	/* send */
	bufw[0] = RTR_RAP_CMD;
	i = strlen (cmd) + 1;
	r_mem_copyendian ((ut8*)bufw+1, (ut8*)&i, 4, endian);
	memcpy (bufw+5, cmd, i);
	r_socket_write (rtr_host[rtr_n].fd, bufw, 5+i);
	/* read */
	r_socket_read (rtr_host[rtr_n].fd, (ut8*)bufr, 5);
	if (bufr[0] != (char)(RTR_RAP_CMD|RTR_RAP_REPLY)) {
		eprintf ("Error: Wrong reply\n");
		return;
	}
	r_mem_copyendian ((ut8*)&cmd_len, (ut8*)bufr+1, 4, endian);
	cmd_output = malloc (cmd_len);
	if (!cmd_output) {
		eprintf ("Error: Allocating cmd output\n");
		return;
	}
	r_socket_read (rtr_host[rtr_n].fd, (ut8*)cmd_output, cmd_len);
	r_cons_printf ("%s\n", cmd_output);
	free ((void *)cmd_output);
}

开发者ID:dialeth，项目名称:radare2，代码行数:58，代码来源:rtr.c

示例11: rap__system

static int rap__system(RIO *io, RIODesc *fd, const char *command) {
	RSocket *s = RIORAP_FD (fd);
	ut8 buf[RMT_MAX];
	char *ptr;
	int op, ret, i, j = 0;

	// send
	if (*command=='!') {
		op = RMT_SYSTEM;
		command++;
	} else
		op = RMT_CMD;
	buf[0] = op;
	i = strlen (command)+1;
	if (i>RMT_MAX) {
		eprintf ("Command too long\n");
		return -1;
	}
	r_mem_copyendian (buf+1, (ut8*)&i, 4, ENDIAN);
	memcpy (buf+5, command, i);
	r_socket_write (s, buf, i+5);
	r_socket_flush (s);

	// read
	ret = r_socket_read_block (s, buf, 5);
	if (ret != 5)
		return -1;
	if (buf[0] != (op | RMT_REPLY)) {
		eprintf ("Unexpected system reply\n");
		return -1;
	}
	r_mem_copyendian ((ut8*)&i, buf+1, 4, ENDIAN);
	if (i == -1)
		return -1;
	ret = 0;
	ptr = (char *)malloc (i);
	if (ptr) {
		int ir, tr = 0;
		do {
			ir = r_socket_read_block (s, (ut8*)ptr+tr, i-tr);
			if (ir>0) tr += ir;
			else break;
		} while (tr<i);
		// TODO: use io->printf() with support for \x00
		ptr[i] = 0;
		if (io->printf) {
			io->printf ("%s", ptr);
			j = i;
		} else j = write (1, ptr, i);
		free (ptr);
	}
	/* Clean */
	if (ret > 0) {
		ret -= r_socket_read (s, (ut8*)buf, RMT_MAX);
	}
	return i-j;
}

开发者ID:jahrome，项目名称:radare2，代码行数:57，代码来源:io_rap.c

示例12: r_socket_printf

R_API void r_socket_printf(RSocket *s, const char *fmt, ...) {
	char buf[BUFFER_SIZE];
	va_list ap;
	if (s->fd >= 0) {
		va_start (ap, fmt);
		vsnprintf (buf, BUFFER_SIZE, fmt, ap);
		r_socket_write (s, buf, strlen(buf));
		va_end (ap);
	}
}

开发者ID:jevinskie，项目名称:radare2，代码行数:10，代码来源:socket.c

示例13: r_core_rtr_cmd

R_API void r_core_rtr_cmd(RCore *core, const char *input) {
	char bufw[1024], bufr[8];
	const char *cmd = NULL, *cmd_output = NULL;
	int i, cmd_len, fd = atoi (input);

	if (fd != 0) {
		if (rtr_host[rtr_n].fd)
			for (rtr_n = 0; rtr_host[rtr_n].fd->fd != fd
				&& rtr_n < RTR_MAX_HOSTS; rtr_n++);
		if (!(cmd = strchr (input, ' '))) {
			eprintf ("Error\n");
			return;
		}
	} else cmd = input;

	if (!rtr_host[rtr_n].fd){
		eprintf ("Error: Unknown host\n");
		return;
	}

	if (!rtr_host[rtr_n].proto == RTR_PROT_RAP){
		eprintf ("Error: Not a rap:// host\n");
		return;
	}

	/* send */
	bufw[0] = RTR_RAP_CMD;
	i = strlen (cmd) + 1;
	r_mem_copyendian ((ut8*)bufw+1, (ut8*)&i, 4, endian);
	memcpy (bufw+5, cmd, i);
	r_socket_write (rtr_host[rtr_n].fd, bufw, 5+i);
	/* read */
	r_socket_read (rtr_host[rtr_n].fd, (ut8*)bufr, 5);
	if (bufr[0] != (char)(RTR_RAP_CMD|RTR_RAP_REPLY)) {
		eprintf ("Error: Wrong reply\n");
		return;
	}
	r_mem_copyendian ((ut8*)&cmd_len, (ut8*)bufr+1, 4, endian);
	if (i == 0)
		return;
	if (i < 0) {
		eprintf ("Error: cmd length < 0\n");
		return;
	}
	cmd_output = malloc (cmd_len);
	if (!cmd_output) {
		eprintf ("Error: Allocating cmd output\n");
		return;
	}
	r_socket_read (rtr_host[rtr_n].fd, (ut8*)cmd_output, cmd_len);
	r_cons_printf ("%s\n", cmd_output);
	free ((void *)cmd_output);
}

开发者ID:moon2l，项目名称:radare2，代码行数:53，代码来源:rtr.c

示例14: r_socket_proc_printf

R_API void r_socket_proc_printf (RSocketProc *sp, const char *fmt, ...) {
	RSocket s;
	char buf[BUFFER_SIZE];
	va_list ap;
	s.is_ssl = false;
	s.fd = sp->fd0[1];
	if (s.fd >= 0) {
		va_start (ap, fmt);
		vsnprintf (buf, BUFFER_SIZE, fmt, ap);
		r_socket_write (&s, buf, strlen(buf));
		va_end (ap);
	}
}

开发者ID:AmesianX，项目名称:radare2，代码行数:13，代码来源:proc.c

示例15: rap__system

static int rap__system(RIO *io, RIODesc *fd, const char *command) {
	RSocket *s = RIORAP_FD (fd);
	ut8 buf[RMT_MAX];
	char *ptr;
	int op, ret, i, j = 0;

	// send
	if (*command=='!') {
		op = RMT_SYSTEM;
		command++;
	} else
		op = RMT_CMD;
	buf[0] = op;
	i = strlen (command);
	if (i>RMT_MAX) {
		eprintf ("Command too long\n");
		return -1;
	}
	r_mem_copyendian (buf+1, (ut8*)&i, 4, ENDIAN);
	memcpy (buf+5, command, i);
	r_socket_write (s, buf, i+5);
	r_socket_flush (s);

	// read
	ret = r_socket_read_block (s, buf, 5);
	if (ret != 5)
		return -1;
	if (buf[0] != (op | RMT_REPLY)) {
		eprintf ("Unexpected system reply\n");
		return -1;
	}
	r_mem_copyendian ((ut8*)&i, buf+1, 4, ENDIAN);
	if (i == -1)
		return -1;
	ret = 0;
	if (i>RMT_MAX) {
		ret = i-RMT_MAX;
		i = RMT_MAX;
	}
	ptr = (char *)malloc (i);
	if (ptr) {
		r_socket_read_block (s, (ut8*)ptr, i);
		j = write (1, ptr, i);
		free (ptr);
	}
	/* Clean */
	if (ret > 0) {
		ret -= r_socket_read (s, (ut8*)buf, RMT_MAX);
	}
	return i-j;
}

开发者ID:0xroot，项目名称:radare2，代码行数:51，代码来源:io_rap.c

示例16: r_socket_http_response

R_API void r_socket_http_response (RSocketHTTPRequest *rs, int code, const char *out, int len, const char *headers) {
	const char *strcode = \
		code==200?"ok":
		code==301?"moved permanently":
		code==302?"Found":
		code==404?"not found":
		"UNKNOWN";
	if (len<1) len = out? strlen (out): 0;
	if (!headers) headers = "";
	r_socket_printf (rs->s, "HTTP/1.0 %d %s\r\n%s"
		"Connection: close\r\nContent-Length: %d\r\n\r\n",
		code, strcode, headers, len);
	if (out && len>0) r_socket_write (rs->s, (void*)out, len);
}

开发者ID:KarjamP，项目名称:radare2，代码行数:14，代码来源:http_server.c

示例17: strdup

R_API char *r_socket_http_post (const char *url, const char *data, int *code, int *rlen) {
	RSocket *s;
	int ssl = !memcmp (url, "https://", 8);
	char *response, *host, *path, *port = "80";
	char *uri = strdup (url);
	if (!uri) return NULL;

	host = strstr (uri, "://");
	if (!host) {
		free (uri);
		printf ("Invalid URI");
		return NULL;
	}
	host += 3;
	port = strchr (host, ':');
	if (!port)
		port = (ssl)?"443":"80";
	else
		*port++ = 0;
	path = strchr (host, '/');
	if (!path)
		path = "";
	else
		*path++ = 0;
	s = r_socket_new (ssl);
	if (!s) {
		printf ("Cannot create socket\n");
		free (uri);
		return NULL;
	}
	if (!r_socket_connect_tcp (s, host, port, 0)) {
		eprintf ("Cannot connect to %s:%s\n", host, port);
		free (uri);
		return NULL;
	}
	/* Send */
	r_socket_printf (s,
			"POST /%s HTTP/1.0\r\n"
			"User-Agent: radare2 "R2_VERSION"\r\n"
			"Accept: */*\r\n"
			"Host: %s\r\n"
			"Content-Length: %i\r\n"
			"Content-Type: application/x-www-form-urlencoded\r\n"
			"\r\n", path, host, strlen (data));
	r_socket_write (s, (void *)data, strlen (data));
	response = r_socket_http_answer (s, code, rlen);
	free (uri);
	return response;
}

开发者ID:AmesianX，项目名称:radare2，代码行数:49，代码来源:http.c

示例18: rap__lseek

static ut64 rap__lseek(struct r_io_t *io, RIODesc *fd, ut64 offset, int whence) {
	RSocket *s = RIORAP_FD (fd);
	int ret;
	ut8 tmp[10];
	// query
	tmp[0] = RMT_SEEK;
	tmp[1] = (ut8)whence;
	r_mem_copyendian (tmp+2, (ut8*)&offset, 8, ENDIAN);
	r_socket_write (s, &tmp, 10);
	r_socket_flush (s);
	// get reply
	ret = r_socket_read_block (s, (ut8*)&tmp, 9);
	if (ret!=9)
		return -1;
	if (tmp[0] != (RMT_SEEK | RMT_REPLY)) {
		eprintf ("Unexpected lseek reply\n");
		return -1;
	}
	r_mem_copyendian ((ut8 *)&offset, tmp+1, 8, !ENDIAN);
	return offset;
}

开发者ID:AitorATuin，项目名称:radare2，代码行数:21，代码来源:io_rap.c

示例19: rap__lseek

static ut64 rap__lseek(RIO *io, RIODesc *fd, ut64 offset, int whence) {
	RSocket *s = RIORAP_FD (fd);
	ut8 tmp[10];
	int ret;
	// query
	tmp[0] = RMT_SEEK;
	tmp[1] = (ut8)whence;
	r_write_be64 (tmp + 2, offset);
	r_socket_write (s, &tmp, 10);
	r_socket_flush (s);
	// get reply
	memset (tmp, 0, 9);
	ret = r_socket_read_block (s, (ut8*)&tmp, 9);
	if (ret != 9 || tmp[0] != (RMT_SEEK | RMT_REPLY)) {
		// eprintf ("%d %d  - %02x %02x %02x %02x %02x %02x %02x\n", 
		// ret, whence, tmp[0], tmp[1], tmp[2], tmp[3], tmp[4], tmp[5], tmp[6]);
		eprintf ("Unexpected lseek reply\n");
		return -1;
	}
	offset = r_read_at_be64 (tmp, 1);
	return offset;
}

开发者ID:EliaGeretto，项目名称:radare2，代码行数:22，代码来源:io_rap.c

示例20: rap__write

static int rap__write(struct r_io_t *io, RIODesc *fd, const ut8 *buf, int count) {
	RSocket *s = RIORAP_FD (fd);
	int ret;
	ut8 *tmp;
	if (count>RMT_MAX)
		count = RMT_MAX;
	if (!(tmp = (ut8 *)malloc (count+5))) {
		eprintf ("rap__write: malloc failed\n");
		return -1;
	}
	tmp[0] = RMT_WRITE;
	r_mem_copyendian ((ut8 *)tmp+1, (ut8*)&count, 4, ENDIAN);
	memcpy (tmp+5, buf, count);

	ret = r_socket_write (s, tmp, count+5);
	r_socket_flush (s);
	if (r_socket_read (s, tmp, 5) != 5) { // TODO read_block?
		eprintf ("rap__write: error\n");
		ret = -1;
	}
	free (tmp);
	// TODO: get reply
	return ret;
}

开发者ID:AitorATuin，项目名称:radare2，代码行数:24，代码来源:io_rap.c

注：本文中的r_socket_write函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ r_str_newf函数代码示例发布时间：2022-05-30

C++ r_sign函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19189|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ r_socket_write函数代码示例

示例1: r_core_rtr_cmds

示例2: haret__read

示例3: rap__read

示例4: r_core_rtr_pushout

示例5: send_packet

示例6: rap__write

示例7: r_socket_new

示例8: rap__read

示例9: haret__system

示例10: r_core_rtr_cmd

示例11: rap__system

示例12: r_socket_printf

示例13: r_core_rtr_cmd

示例14: r_socket_proc_printf

示例15: rap__system

示例16: r_socket_http_response

示例17: strdup

示例18: rap__lseek

示例19: rap__lseek

示例20: rap__write

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

色的笔顺,说说色的笔画,诠释色的部首

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053