C++ rDebug函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rDebug函数的典型用法代码示例。如果您正苦于以下问题：C++ rDebug函数的具体用法？C++ rDebug怎么用？C++ rDebug使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rDebug函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rDebug

bool CipherFileIO::writeOneBlock(const IORequest &req) {

  if (haveHeader && fsConfig->reverseEncryption) {
    rDebug("writing to a reverse mount with per-file IVs is not implemented");
    return -EROFS;
  }

  int bs = blockSize();
  off_t blockNum = req.offset / bs;

  if (haveHeader && fileIV == 0) initHeader();

  bool ok;
  if (req.dataLen != bs) {
    ok = streamWrite(req.data, (int)req.dataLen, blockNum ^ fileIV);
  } else {
    ok = blockWrite(req.data, (int)req.dataLen, blockNum ^ fileIV);
  }

  if (ok) {
    if (haveHeader) {
      IORequest tmpReq = req;
      tmpReq.offset += HEADER_SIZE;
      ok = base->write(tmpReq);
    } else
      ok = base->write(req);
  } else {
    rDebug("encodeBlock failed for block %" PRIi64 ", size %i", blockNum,
           req.dataLen);
    ok = false;
  }
  return ok;
}

开发者ID:cnhup，项目名称:encfs4win-reloaded，代码行数:33，代码来源:CipherFileIO.cpp

示例2: blockSize

/**
 * Read block from backing ciphertext file, decrypt it (normal mode)
 * or
 * Read block from backing plaintext file, then encrypt it (reverse mode)
 */
ssize_t CipherFileIO::readOneBlock(const IORequest &req) const {
  int bs = blockSize();
  off_t blockNum = req.offset / bs;

  ssize_t readSize = 0;
  IORequest tmpReq = req;

  // adjust offset if we have a file header
  if (haveHeader && !fsConfig->reverseEncryption) {
    tmpReq.offset += HEADER_SIZE;
  }
  readSize = base->read(tmpReq);

  bool ok;
  if (readSize > 0) {
    if (haveHeader && fileIV == 0)
      const_cast<CipherFileIO *>(this)->initHeader();

    if (readSize != bs) {
      rDebug("streamRead(data, %d, IV)", (int)readSize);
      ok = streamRead(tmpReq.data, (int)readSize, blockNum ^ fileIV);
    } else {
      ok = blockRead(tmpReq.data, (int)readSize, blockNum ^ fileIV);
    }

    if (!ok) {
      rDebug("decodeBlock failed for block %" PRIi64 ", size %i", blockNum,
             (int)readSize);
      readSize = -1;
    }
  } else
    rDebug("readSize zero for offset %" PRIi64, req.offset);

  return readSize;
}

开发者ID:cnhup，项目名称:encfs4win-reloaded，代码行数:40，代码来源:CipherFileIO.cpp

示例3: rDebug

bool CipherFileIO::writeHeader() {
  if (!base->isWritable()) {
    // open for write..
    int newFlags = lastFlags | O_RDWR;
    if (base->open(newFlags) < 0) {
      rDebug("writeHeader failed to re-open for write");
      return false;
    }
  }

  if (fileIV == 0) rError("Internal error: fileIV == 0 in writeHeader!!!");
  rDebug("writing fileIV %" PRIu64, fileIV);

  unsigned char buf[8] = {0};
  for (int i = 0; i < 8; ++i) {
    buf[sizeof(buf) - 1 - i] = (unsigned char)(fileIV & 0xff);
    fileIV >>= 8;
  }

  cipher->streamEncode(buf, sizeof(buf), externalIV, key);

  IORequest req;
  req.offset = 0;
  req.data = buf;
  req.dataLen = 8;

  base->write(req);

  return true;
}

开发者ID:digideskio，项目名称:encfs，代码行数:30，代码来源:CipherFileIO.cpp

示例4: rDebug

      Chaine TypeTemplate::Afficher() const
      {
        
        rDebug("TypeTemplate::Afficher") ;
        
        Chaine resultat(NomComplet(this->espaceDeNom)) ;

        rDebug("TypeTemplate::Afficher 2") ;        

        Chaine sortieParametres ;
//        if (parametres)
//          sortieParametres = (parametres->ToString()) ;

        for(IterateurListeComposition<ParametreTemplate> parametre(this->_parametres) ;
            parametre.Valide() ;
            ++parametre)
        {
        
          sortieParametres += ',' ;
          sortieParametres += parametre->Afficher() ;
          rDebug("parametre = " + parametre->Afficher()) ;
        }


        rDebug("fin TypeTemplate::Afficher") ;
        
        return "template " + resultat + Chaine("::") + 
               classeTemplate->Name()->ToString() + 
               "<" + sortieParametres +">" ;

        
      }

开发者ID:BackupTheBerlios，项目名称:projet-univers-svn，代码行数:32，代码来源:type_template.cpp

示例5: rDebug

ssize_t Memory::write(const char *buf, size_t size, off_t offset)
{
	rDebug("Memory::write(%s) | m_FileSize: 0x%lx, size: 0x%lx, offset: 0x%lx",
			m_name.c_str(), (long int) m_FileSize, (long int) size, (long int) offset);

	m_TimeSet = false;

	if ((m_FileSize == offset) && FileUtils::isZeroOnly(buf, size))
	{
		rDebug("Memory::write(%s) | Full of zeroes only", m_name.c_str());

		assert(m_FileSizeSet == true);
		assert(size > 0);
		m_FileSize = offset + size;
	}
	else
	{
		// Store buffer to memory in LinearMap.
		//
		if (m_LinearMap.put(buf, size, offset) == -1)
			return -1;

		assert(m_FileSizeSet == true);
		assert(size > 0);
		m_FileSize = max(m_FileSize, (off_t) (offset + size));

		// Try to write a block to disk if appropriate.
		// 
		int r = write(false);
		if (r == -1)
			return r;
	}

	return size;
}

开发者ID:rdp，项目名称:fusecompress，代码行数:35，代码来源:Memory.cpp

示例6: configGetString

///Local Component parameters read at start
///Reading parameters from config file or passed in command line, with Ice machinery
///We need to supply a list of accepted values to each call
void SpecificMonitor::readConfig(RoboCompCommonBehavior::ParameterList &params )
{
	//Read params from config file
	//Example
	RoboCompCommonBehavior::Parameter aux;
	aux.editable = false;
	configGetString( "joystickUniversal.Device", aux.value,"/dev/input/js0");
	params["joystickUniversal.Device"] = aux;
	
	aux.editable = false;
	configGetString( "joystickUniversal.NumAxes", aux.value,"2");
	params["joystickUniversal.NumAxes"] = aux;
	
	aux.editable = false;
	configGetString( "joystickUniversal.NumButtons", aux.value,"1");
	params["joystickUniversal.NumButtons"] = aux;
	
	aux.editable = false;
	configGetString( "joystickUniversal.BasicPeriod", aux.value,"100");
	params["joystickUniversal.BasicPeriod"] = aux;
	
	aux.editable = false;
	configGetString( "joystickUniversal.NormalizationValue", aux.value,"10");
	params["joystickUniversal.NormalizationValue"] = aux;
	
	aux.editable = false;
	configGetString( "joystickUniversal.VelocityAxis", aux.value,"vel");
	params["joystickUniversal.VelocityAxis"] = aux;
	
	aux.editable = false;
	configGetString( "joystickUniversal.DirectionAxis", aux.value,"dir");
	params["joystickUniversal.DirectionAxis"] = aux;
	
	for (int i=0; i < atoi(params.at("joystickUniversal.NumAxes").value.c_str()); i++)
	{
		aux.editable = false;
		std::string s = QString::number(i).toStdString();
		configGetString( "joystickUniversal.Axis_" + s, aux.value , "4");
		params["joystickUniversal.Axis_" + s] = aux;
		rDebug("joystickUniversal.Axis_"+QString::fromStdString(s)+" = " + QString::fromStdString(params.at("joystickUniversal.Axis_" + s).value));
		QStringList list = QString::fromStdString(aux.value).split(",");
		if (list.size() != 4)	
			qFatal("joystickUniversalComp::Monitor::readConfig(): ERROR reading axis. Only %d parameters for motor %d.", list.size(), i);
		
		aux.value=list[0].toStdString();
		params["joystickUniversal.Axis_" + s +".Name"] = aux;
		rDebug("joystickUniversal.Axis_" + s + ".Name = " + params.at("joystickUniversal.Axis_" + s +".Name").value);
		aux.value=list[1].toStdString();
		params["joystickUniversal.Axis_" + s +".MinRange"]= aux;
		rDebug("joystickUniversal.Axis_"+s+".MinRange = "+ params["joystickUniversal.Axis_" + s +".MinRange"].value);
		aux.value=list[2].toStdString();
		params["joystickUniversal.Axis_" + s +".MaxRange"]= aux;
		rDebug("joystickUniversal.Axis_"+s+".MaxRange = "+ params["joystickUniversal.Axis_" + s +".MaxRange"].value);
		aux.value=list[3].toStdString();
		params["joystickUniversal.Axis_" + s +".Inverted"]= aux;
		rDebug("joystickUniversal.Axis_"+s+".Inverted = "+ params["joystickUniversal.Axis_" + s +".Inverted"].value);

	}
}

开发者ID:BasilMVarghese，项目名称:robocomp-robolab，代码行数:62，代码来源:specificmonitor.cpp

示例7: Parent

Compress::Compress(const struct stat *st, const char *name) :
	Parent (st, name)
{
	if (st->st_size == 0)
	{
		// New empty file, default strategy
		// is to compress a file.
		//
		m_IsCompressed = true;

		// New empty file, will be compressed,
		// reserve space for a FileHeader.
		//
		m_RawFileSize = FileHeader::MaxSize;
	}
	else if (st->st_size < FileHeader::MinSize)
	{
		// Nonempty file with length smaller than minimal length of
		// the FileHeader has to be uncompressed.

		m_IsCompressed = false;
	}
	else
	{
		// This is a constructor, no one could
		// call the open() function yet.

		assert(m_fd == -1);

		try {
			restoreFileHeader(name);

			m_IsCompressed = m_fh.isValid();

			if (m_IsCompressed)
			{
				m_RawFileSize = (m_fh.index == 0) ?
				              FileHeader::MaxSize : st->st_size;
			}
		}
		catch (...) { m_IsCompressed = false; }
	}

	if (m_IsCompressed)
	{
		rDebug("C (%s), raw/user 0x%lx/0x%lx bytes",
				name, (long int) m_RawFileSize, (long int) m_fh.size);
	}
	else
	{
		rDebug("N (%s), 0x%lx bytes", name, (long int) st->st_size);
	}
}

开发者ID:keshav2125，项目名称:fusecompress，代码行数:53，代码来源:Compress.cpp

示例8: do_fuse_loop

int do_fuse_loop(struct fuse *fs, bool mt)
{
	if (!fs->ch.get() || fs->ch->mountpoint.empty())
		return -1;

	//Calculate umasks
	int umask=fs->conf.umask;
	if (umask==0) umask=0777; //It's OCTAL! Really!
	int dirumask=fs->conf.dirumask;
	if (dirumask==0) dirumask=umask;
	int fileumask=fs->conf.fileumask;
	if (fileumask==0) fileumask=umask;

	impl_fuse_context impl(&fs->ops,fs->user_data, fs->conf.debug!=0, 
		fileumask, dirumask, fs->conf.fsname, fs->conf.volname);

	//Parse Dokan options
	PDOKAN_OPTIONS dokanOptions = (PDOKAN_OPTIONS)malloc(sizeof(DOKAN_OPTIONS));
	if (dokanOptions == NULL) {
		rDebug("dokanOptions == NULL");
		return -1;
	}
	ZeroMemory(dokanOptions, sizeof(DOKAN_OPTIONS));
	dokanOptions->Options |= DOKAN_OPTION_KEEP_ALIVE|DOKAN_OPTION_REMOVABLE;
	dokanOptions->GlobalContext = reinterpret_cast<ULONG64>(&impl);

	wchar_t mount[MAX_PATH+1];
	mbstowcs(mount,fs->ch->mountpoint.c_str(),MAX_PATH);

	dokanOptions->Version = DOKAN_VERSION;
	dokanOptions->MountPoint = mount;
	dokanOptions->ThreadCount = mt?FUSE_THREAD_COUNT:1;
	
	//Debug
	if (fs->conf.debug)
		dokanOptions->Options |= DOKAN_OPTION_DEBUG|DOKAN_OPTION_STDERR;

	//Load Dokan DLL
	if (!fs->ch->init()) {
		rError("Couldn't load DLL.");
		return -1; //Couldn't load DLL. TODO: UGLY!!
	}

	//The main loop!
	fs->within_loop=true;
	int res=fs->ch->ResolvedDokanMain(dokanOptions, &dokanOperations);
	fs->within_loop=false;
	rDebug("res=%i", res);
	return res;
}

开发者ID:cnhup，项目名称:encfs4win-reloaded，代码行数:50，代码来源:docanfuse.cpp

示例9: assert

int Compress::open(const char *name, int flags)
{
	assert(m_name == name);

	int r;

	r = Parent::open(name, flags);

	if ((m_refs == 1) && m_IsCompressed && (m_fh.index != 0))
	{
		try {
			restoreLayerMap();
		}
		catch (...)
		{
			// TODO: Detect error and set 'errno' correctly.

			rError("%s: Failed to restore LayerMap of file '%s'", __PRETTY_FUNCTION__, name);

			// Failed to restore LayerMap althrought it should be present. Mark the file
			// as not compressed to pass following release() correctly.

			m_IsCompressed = false;
			release(name);

			errno = EIO;
			return -1;
		}
	}

	rDebug("Compress::open m_refs: %d", m_refs);

	return r;
}

开发者ID:keshav2125，项目名称:fusecompress，代码行数:34，代码来源:Compress.cpp

示例10: rDebug

/**
* \brief Kill component
*/
void GenericMonitor::killYourSelf()
{
	rDebug("Killing myself");
	worker->killYourSelf();
	emit kill();
	
}

开发者ID:AshwinChandlapur，项目名称:perception，代码行数:10，代码来源:genericmonitor.cpp

示例11: rDebug

void Compress::storeLayerMap()
{
	rDebug("%s: m_fd: %d", __PRETTY_FUNCTION__, m_fd);

	// Don't store LayerMap if it has not been modified
	// since begining (open).

	if (!m_lm.isModified())
		return;

	io::nonclosable_file_descriptor file(m_fd);
	file.seek(m_RawFileSize, ios_base::beg);

	io::filtering_ostream out;
	m_fh.type.push(out);
	out.push(file);

	portable_binary_oarchive pba(out);
	pba << m_lm;

	// Set the file header's index to the current offset
	// where the index was saved.

	m_fh.index = m_RawFileSize;
}

开发者ID:keshav2125，项目名称:fusecompress，代码行数:25，代码来源:Compress.cpp

示例12: rDebug

/**
* \brief Kill component
*/
void Monitor::killYourSelf()
{
	rDebug("Killing myself");
	this->exit();
	worker->killYourSelf();
	emit kill();
}

开发者ID:robocomp，项目名称:robocomp-robolab，代码行数:10，代码来源:monitor.cpp

示例13: Ui_guiDlg

/**
* \brief Default constructor
*/
GenericWorker::GenericWorker(MapPrx& mprx) :
#ifdef USE_QTGUI
Ui_guiDlg()
#else
QObject()
#endif

{

	speechinform_proxy = (*(SpeechInformPrx*)mprx["SpeechInformPub"]);

	mutex = new QMutex(QMutex::Recursive);

	#ifdef USE_QTGUI
		setupUi(this);
		show();
	#endif
	Period = BASIC_PERIOD;
	connect(&timer, SIGNAL(timeout()), this, SLOT(compute()));
// 	timer.start(Period);
}

/**
* \brief Default destructor
*/
GenericWorker::~GenericWorker()
{

}
void GenericWorker::killYourSelf()
{
	rDebug("Killing myself");
	emit kill();
}

开发者ID:alvarovillena，项目名称:robocomp-SIMD，代码行数:37，代码来源:genericworker.cpp

示例14: nom

 BaseTemplate TypeTemplate::TemplateDeBase() const
 {
 
   Chaine nom(this->classeTemplate->Name()->ToString()) ;
   
   rDebug(nom) ;
   
   if (nom == Chaine("Association"))
     return Compilateur::Association ;
   else if (nom == Chaine("Composition"))
     return Compilateur::Composition ;
   else if (nom == Chaine("EnsembleComposition"))
     return Compilateur::EnsembleComposition ;
   else if (nom == Chaine("EnsembleAssociation"))
     return Compilateur::EnsembleAssociation ;
   else if (nom == Chaine("FonctionObjetValeur"))
     return Compilateur::FonctionObjetValeur ;
   else if (nom == Chaine("FonctionCompositionObjetObjet"))
     return Compilateur::FonctionCompositionObjetObjet ;
   else if (nom == Chaine("FonctionAssociationObjetObjet"))
     return Compilateur::FonctionAssociationObjetObjet ;
   else if (nom == Chaine("FonctionCompositionValeurObjet"))
     return Compilateur::FonctionCompositionValeurObjet ;
   else if (nom == Chaine("FonctionAssociationValeurObjet"))
     return Compilateur::FonctionAssociationValeurObjet ;
   
   else
     return Compilateur::NonPrisEnCompte ;
 }

开发者ID:BackupTheBerlios，项目名称:projet-univers-svn，代码行数:29，代码来源:type_template.cpp

示例15: Ui_guiDlg

/**
* \brief Default constructor
*/
GenericWorker::GenericWorker(MapPrx& mprx) :
#ifdef USE_QTGUI
Ui_guiDlg()
#else
QObject()
#endif

{
	innermodelmanager_proxy = (*(InnerModelManagerPrx*)mprx["InnerModelManagerProxy"]);
	jointmotor0_proxy = (*(JointMotorPrx*)mprx["JointMotor0Proxy"]);
	jointmotor1_proxy = (*(JointMotorPrx*)mprx["JointMotor1Proxy"]);
	differentialrobot_proxy = (*(DifferentialRobotPrx*)mprx["DifferentialRobotProxy"]);

	mutex = new QMutex();
	#ifdef USE_QTGUI
		setupUi(this);
		show();
	#endif
	Period = BASIC_PERIOD;
	connect(&timer, SIGNAL(timeout()), this, SLOT(compute()));
}

/**
* \brief Default destructor
*/
GenericWorker::~GenericWorker()
{

}
void GenericWorker::killYourSelf()
{
	rDebug("Killing myself");
	emit kill();
}

开发者ID:pbustos，项目名称:beta-robotica-class，代码行数:37，代码来源:genericworker.cpp

示例16: qt_msg_handler

void qt_msg_handler(QtMsgType type, const char *msg)
#endif
{
  switch (type) {
    case QtDebugMsg:
      rDebug(QString("QtDebugMsg: %1").arg(msg));
      break;
    case QtWarningMsg:
      rNotice(QString("QtWarningMsg: %1").arg(msg));
      break;
    case QtCriticalMsg:
      rWarn(QString("QtCriticalMsg: %1").arg(msg));
      break;
    case QtFatalMsg:
      rError(QString("QtFatalMsg: %1").arg(msg));
      break;
#if QT_VERSION >= QT_VERSION_CHECK (5, 5, 0)
    case QtInfoMsg:
      break;
#endif
  }
  if (type == QtFatalMsg) {
    rError("Fatal Qt error. Aborting.");
    abort();
  }
}

开发者ID:jiangxilong，项目名称:RetroShare，代码行数:26，代码来源:rshare.cpp

示例17: Ui_guiDlg

/**
* \brief Default constructor
*/
GenericWorker::GenericWorker(MapPrx& mprx) :
#ifdef USE_QTGUI
Ui_guiDlg()
#else
QObject()
#endif

{
	innermodelmanager_proxy = (*(InnerModelManagerPrx*)mprx["InnerModelManagerProxy"]);
	agmexecutive_proxy = (*(AGMExecutivePrx*)mprx["AGMExecutiveProxy"]);

	mutex = new QMutex(QMutex::Recursive);

	#ifdef USE_QTGUI
		setupUi(this);
		show();
	#endif
	Period = BASIC_PERIOD;
	connect(&timer, SIGNAL(timeout()), this, SLOT(compute()));
// 	timer.start(Period);
}

/**
* \brief Default destructor
*/
GenericWorker::~GenericWorker()
{

}
void GenericWorker::killYourSelf()
{
	rDebug("Killing myself");
	emit kill();
}

开发者ID:robocomp，项目名称:robocomp-shelly，代码行数:37，代码来源:genericworker.cpp

示例18: Ui_guiDlg

/**
* \brief Default constructor
*/
GenericWorker::GenericWorker(MapPrx& mprx) :
#ifdef USE_QTGUI
Ui_guiDlg()
#else
QObject()
#endif

{
	inversekinematics_proxy = (*(InverseKinematicsPrx*)mprx["InverseKinematicsProxy"]);
	jointmotor_proxy = (*(JointMotorPrx*)mprx["JointMotorProxy"]);


	mutex = new QMutex(QMutex::Recursive);

	#ifdef USE_QTGUI
		setupUi(this);
		show();
	#endif
	Period = BASIC_PERIOD;
	connect(&timer, SIGNAL(timeout()), this, SLOT(compute()));
// 	timer.start(Period);
}

/**
* \brief Default destructor
*/
GenericWorker::~GenericWorker()
{

}
void GenericWorker::killYourSelf()
{
	rDebug("Killing myself");
	emit kill();
}

开发者ID:BasilMVarghese，项目名称:robocomp-robolab，代码行数:38，代码来源:genericworker.cpp

示例19: switch

/// PRIVATE METHODS
int CanBus::setBaudRate(int baudRate)
{
	void * speed;
	switch(baudRate)
	{
		case 20000:	speed=VSCAN_SPEED_20K;
					break;
		case 50000:	speed=VSCAN_SPEED_50K;
					break;
		case 100000:speed=VSCAN_SPEED_100K;
					break;
		case 125000:speed=VSCAN_SPEED_125K;
					break;
		case 250000:speed=VSCAN_SPEED_250K;
					break;
		case 500000:speed=VSCAN_SPEED_500K;
					break;
		case 800000:speed=VSCAN_SPEED_800K;
					break;
		case 1000000:speed=VSCAN_SPEED_1M;
					break;
		default:
			rDebug("ERROR: "+QString::number(baudRate)+" no es un valor de baudRate válido (20000, 50000, 100000, 125000, 250000, 500000, 800000, 1000000)");
			return -1;
	}
	char string[33];
	int status = VSCAN_Ioctl(devHandler, VSCAN_IOCTL_SET_SPEED, VSCAN_SPEED_1M);
	VSCAN_GetErrorString(status,string,32);
	 printf(" Apertura puerto %s\n",string);
	 
	status = VSCAN_Ioctl(devHandler, VSCAN_IOCTL_SET_TIMESTAMP, VSCAN_TIMESTAMP_ON);
    VSCAN_GetErrorString(status,string,32);
    printf(" SET TIME STAMP %s\n",string);
	return status;
}

开发者ID:BasilMVarghese，项目名称:robocomp，代码行数:36，代码来源:canbus.cpp

示例20: printf

/**
* \brief Default constructor
*/
CanBus::CanBus(QString device, int baudRate)
{
	printf("CanBus::CanBus:  %s %d\n", device.toStdString().c_str(), baudRate);
	rDebug("CanBus initialize");
	// Open and initialize the device
	devHandler = VSCAN_Open(device.toAscii().data(),  VSCAN_MODE_NORMAL);
	if(devHandler < 0)
	{
		qFatal("Failed to open Can device ");
		return;
	}
	rDebug("Can device "+device+" oppened correctly");
	
	if(setBaudRate(baudRate) != 0)
		rDebug("Failed setting baudRate");
}

开发者ID:BasilMVarghese，项目名称:robocomp，代码行数:19，代码来源:canbus.cpp

注：本文中的rDebug函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rMessage函数代码示例发布时间：2022-05-30

C++ r8a66597_read函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19190|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ rDebug函数代码示例

示例1: rDebug

示例2: blockSize

示例3: rDebug

示例4: rDebug

示例5: rDebug

示例6: configGetString

示例7: Parent

示例8: do_fuse_loop

示例9: assert

示例10: rDebug

示例11: rDebug

示例12: rDebug

示例13: Ui_guiDlg

示例14: nom

示例15: Ui_guiDlg

示例16: qt_msg_handler

示例17: Ui_guiDlg

示例18: Ui_guiDlg

示例19: switch

示例20: printf

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

PureSwift/BluetoothLinux: Pure Swift Lin

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053