C++ quickStop函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中quickStop函数的典型用法代码示例。如果您正苦于以下问题：C++ quickStop函数的具体用法？C++ quickStop怎么用？C++ quickStop使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了quickStop函数的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: st_synchronize

void MemReader::printingHasFinished()
{
    st_synchronize();
    quickStop();
    isprinting = false;
    autotempShutdown();
}

开发者ID:Sharebot3D，项目名称:Materia101，代码行数:7，代码来源:memreader.cpp

示例2: st_synchronize

void CardReader::printingHasFinished()
{
    st_synchronize();
    if(file_subcall_ctr>0) //heading up to a parent file that called current as a procedure.
    {
      file.close();
      file_subcall_ctr--;
      openFile(filenames[file_subcall_ctr],true,true);
      setIndex(filespos[file_subcall_ctr]);
      startFileprint();
    }
    else
    {
      quickStop();
      file.close();
      sdprinting = false;
      if(SD_FINISHED_STEPPERRELEASE)
      {
          //finishAndDisableSteppers();
          enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND_ONE));
          enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND_TWO));
          enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND_THREE));
      }
      autotempShutdown();
    }
}

开发者ID:sunqiujun，项目名称:CherryPi-S3-Marlin_v1，代码行数:26，代码来源:cardreader.cpp

示例3: checkHitEndstops

void checkHitEndstops()
{
 if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
   SERIAL_ECHO_START;
   SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
   if(endstop_x_hit) {
     SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
   }
   if(endstop_y_hit) {
     SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
   }
   if(endstop_z_hit) {
     SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
   }
   SERIAL_ECHOLN("");
   endstop_x_hit=false;
   endstop_y_hit=false;
   endstop_z_hit=false;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
   if (abort_on_endstop_hit)
   {
     card.sdprinting = false;
     card.closefile();
     quickStop();
     setTargetHotend0(0);
     setTargetHotend1(0);
     setTargetHotend2(0);
   }
#endif
 }
}

开发者ID:AllenMcAfee，项目名称:Ultimaker2Marlin，代码行数:34，代码来源:stepper.cpp

示例4: checkHitEndstops

void checkHitEndstops()
{
    if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
        SERIAL_ECHO_START;
        SERIAL_ECHO(MSG_ENDSTOPS_HIT);

        if(endstop_x_hit) {
            SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
        }
        if(endstop_y_hit) {
            SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]);
        }
        if(endstop_z_hit) {
            SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
        }

        SERIAL_ECHOLN("");
        endstop_x_hit=false;
        endstop_y_hit=false;
        endstop_z_hit=false;
        if (abort_on_endstop_hit){
            quickStop();
            Jawsboard::getBoard().setTargetDegExtruder(0,0);
            Jawsboard::getBoard().setTargetDegExtruder(0,1);
            Jawsboard::getBoard().setTargetDegExtruder(0,2);
        }
    }
}

开发者ID:RennWang，项目名称:JawsFromMarlin，代码行数:28，代码来源:stepper.cpp

示例5: checkHitEndstops

void checkHitEndstops()
{
 if( endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_j_hit) {
   SERIAL_ECHO_START;
   snprintf(json_str,JSONSIZE,"{%s:[",MSG_ENDSTOPS_HIT);
   SERIAL_PROTOCOL(json_str);
   comma = false;
   if(endstop_x_hit) {
     SERIAL_PROTOCOLPGM("\"x\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
     comma = true;
   }
   if(endstop_y_hit) {
     if (comma) SERIAL_PROTOCOLPGM(",");
     SERIAL_PROTOCOLPGM("\"y\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
     comma = true;
   }
   if(endstop_z_hit) {
     if (comma) SERIAL_PROTOCOLPGM(",");
     SERIAL_PROTOCOLPGM("\"z\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
     comma = true;
   }
   if(endstop_j_hit) {
     if (comma) SERIAL_PROTOCOLPGM(",");
     SERIAL_PROTOCOLPGM("\"j\"");
     LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "J");
   }
   SERIAL_PROTOCOL("]}");
   SERIAL_MSG_END;
   endstop_x_hit=false;
   endstop_y_hit=false;
   endstop_z_hit=false;
   endstop_j_hit=false;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
   if (abort_on_endstop_hit)
   {
     card.sdprinting = false;
     card.closefile();
     quickStop();
     setTargetHotend0(0);
     setTargetHotend1(0);
     setTargetHotend2(0);
   }
#endif
 }
}

开发者ID:ElementRobot，项目名称:firmware，代码行数:48，代码来源:stepper.cpp

示例6: st_synchronize

void CardReader::printingHasFinished()
{
    st_synchronize();
    if(file_subcall_ctr>0) //heading up to a parent file that called current as a procedure.
    {
      file.close();
      file_subcall_ctr--;
      openFile(filenames[file_subcall_ctr],true,true);
      setIndex(filespos[file_subcall_ctr]);
      startFileprint();
    }
    else
    {
      quickStop();
      file.close();
      sdprinting = false;
      if(SD_FINISHED_STEPPERRELEASE) //EZ-MAKER Customization RGB code
      {
          enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
          GREEN_LED;
          // totalprints_success();

      }

      autotempShutdown();
    }
}

开发者ID:EZ3-India，项目名称:Unkia，代码行数:27，代码来源:cardreader.cpp

示例7: lcd_sdcard_stop

static void lcd_sdcard_stop()
{
    card.sdprinting = false;
    card.closefile();
    quickStop();
    if(SD_FINISHED_STEPPERRELEASE)
    {
        enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
    }
    autotempShutdown();
}

开发者ID:tianshiz，项目名称:3DPrinterr，代码行数:11，代码来源:ultralcd.cpp

示例8: st_synchronize

void CardReader::printingHasFinished()
{
    st_synchronize();
    quickStop();
    sdprinting = false;
    if(SD_FINISHED_STEPPERRELEASE)
    {
        //finishAndDisableSteppers();
        enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
    }
    autotempShutdown();
}

开发者ID:BadgerOps，项目名称:reprap，代码行数:12，代码来源:cardreader.cpp

示例9: lcd_sdcard_stop

static void lcd_sdcard_stop()
{
    card.sdprinting = false;
    card.closefile();
    quickStop();
    if(SD_FINISHED_STEPPERRELEASE)
    {
        enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
    }
    
    cancel_heatup = true;
}

开发者ID:FracktalWorks，项目名称:BobcMarlin，代码行数:12，代码来源:ultralcd.cpp

示例10: lcd_sdcard_stop

static void lcd_sdcard_stop()
{
    card.sdprinting = false;
    card.closefile();
    quickStop();
    if(SD_FINISHED_STEPPERRELEASE)
    {
        enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
    }
    autotempShutdown();

	cancel_heatup = true;

	lcd_setstatus(MSG_PRINT_ABORTED);
}

开发者ID:Trideo，项目名称:PrintBox-Max，代码行数:15，代码来源:ultralcd.cpp

示例11: checkHitEndstops

void checkHitEndstops() {
  if (endstop_hit_bits) {
    ECHO_SM(DB, MSG_ENDSTOPS_HIT);
    if (endstop_hit_bits & BIT(X_MIN)) {
      ECHO_MV(MSG_ENDSTOP_X, (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_XS);
    }
    if (endstop_hit_bits & BIT(Y_MIN)) {
      ECHO_MV(MSG_ENDSTOP_Y, (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_YS);
    }
    if (endstop_hit_bits & BIT(Z_MIN)) {
      ECHO_MV(MSG_ENDSTOP_Z, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZS);
    }
    #ifdef Z_PROBE_ENDSTOP
    if (endstop_hit_bits & BIT(Z_PROBE)) {
      ECHO_MV(MSG_ENDSTOP_ZPS, (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ZPS);
    }
    #endif
    #ifdef NPR2
    if (endstop_hit_bits & BIT(E_MIN)) {
      ECHO_MV(MSG_ENDSTOP_E, (float)endstops_trigsteps[E_AXIS] / axis_steps_per_unit[E_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT MSG_ENDSTOP_ES);
    }
    #endif
    ECHO_E;

    endstops_hit_on_purpose();

    #if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
      if (abort_on_endstop_hit) {
        card.sdprinting = false;
        card.closeFile();
        quickStop();
        disable_all_heaters(); // switch off all heaters.
      }
    #endif
  }
}

开发者ID:pablo1968，项目名称:MarlinKimbra4due，代码行数:41，代码来源:stepper.cpp

示例12: checkHitEndstops

void checkHitEndstops() {
  if (endstop_x_hit || endstop_y_hit || endstop_z_hit || endstop_z_probe_hit) { // #ifdef || endstop_z_probe_hit to save space if needed.
    SERIAL_ECHO_START;
    SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
    if (endstop_x_hit) {
      SERIAL_ECHOPAIR(" X:", (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
    }
    if (endstop_y_hit) {
      SERIAL_ECHOPAIR(" Y:", (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
    }
    if (endstop_z_hit) {
      SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
    }
    #ifdef Z_PROBE_ENDSTOP
    if (endstop_z_probe_hit) {
      SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP");
    }
    #endif
    SERIAL_EOL;

    endstops_hit_on_purpose();

    #if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
      if (abort_on_endstop_hit) {
        card.sdprinting = false;
        card.closefile();
        quickStop();
        setTargetHotend0(0);
        setTargetHotend1(0);
        setTargetHotend2(0);
        setTargetHotend3(0);
        setTargetBed(0);
      }
    #endif
  }
}

开发者ID:Claude59，项目名称:Mondrian3，代码行数:40，代码来源:stepper.cpp

示例13: lcd_sdcard_stop

static void lcd_sdcard_stop()
{
    card.sdprinting = false;
    card.closefile();
    quickStop();
    if(SD_FINISHED_STEPPERRELEASE)
    {
		if (current_position[Z_AXIS] < Z_MAX_POS - 191)
		{
			enquecommand_P(PSTR(SD_FINISHED_MOVEEXTRUDERAWAY1));
			enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
		}
		else
		{
			enquecommand_P(PSTR(SD_FINISHED_MOVEEXTRUDERAWAY0));
			enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
		}
    }
		disable_heater();
    autotempShutdown();
	
	lcd_setstatus(MSG_PRINT_ABORTED);
}

开发者ID:Drayson80，项目名称:UMO_Marlin_v20140622，代码行数:23，代码来源:ultralcd.cpp

示例14: checkHitEndstops

void checkHitEndstops() {
  if (endstop_hit_bits) {
    SERIAL_ECHO_START;
    SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
    if (endstop_hit_bits & BIT(X_MIN)) {
      SERIAL_ECHOPAIR(" X:", (float)endstops_trigsteps[X_AXIS] / axis_steps_per_unit[X_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "X");
    }
    if (endstop_hit_bits & BIT(Y_MIN)) {
      SERIAL_ECHOPAIR(" Y:", (float)endstops_trigsteps[Y_AXIS] / axis_steps_per_unit[Y_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Y");
    }
    if (endstop_hit_bits & BIT(Z_MIN)) {
      SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
    }
    #ifdef Z_PROBE_ENDSTOP
    if (endstop_hit_bits & BIT(Z_PROBE)) {
      SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
      LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP");
    }
    #endif
    SERIAL_EOL;

    endstops_hit_on_purpose();

    #if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT)
      if (abort_on_endstop_hit) {
        card.sdprinting = false;
        card.closefile();
        quickStop();
        disable_all_heaters(); // switch off all heaters.
      }
    #endif
  }
}

开发者ID:mkeyno，项目名称:Marlin4Due，代码行数:36，代码来源:stepper.cpp

示例15: process


//.........这里部分代码省略.........
            }
            else if (buff_value[0]=='S')
            {
                int16_t t;
                uint8_t i;
                
                t=atoi((const char*)buff_value+1);
                
                if (t<1) t=1;
                else if (t>50) t=50;
                
                feedmultiply=t*10;
            }
            break;
            
        case 'P':
            uint8_t i;
            if (buff_value[0]=='H')
            {
            	enquecommand_P(PSTR("G28"));
            }
            else if (buff_value[0]=='C')
            {
                //host::startOnboardBuild(utility::TOOLHEAD_CALIBRATE);
            }
            else if (buff_value[0]=='X')
            {
				extern bool cancel_heatup;
                writeString((char *)"{SYS:CANCELING}");
				//card.pauseSDPrint();
				//disable_heater();
				card.sdprinting = false;
				card.closefile();
				quickStop();
				if(SD_FINISHED_STEPPERRELEASE)
				{
					enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
				}
				autotempShutdown();
				cancel_heatup = true;
				writeString((char *)"{SYS:STARTED}");
				writeString((char *)"{U:RG1R180180120P0L1S0D0O1E1H0C0X1Y1Z1A2B2N3M0}");
				
            }
            else if (buff_value[0]=='P')
            {
                writeString((char *)"{SYS:PAUSE}");
                card.pauseSDPrint();
                writeString((char *)"{SYS:PAUSED}");
            }
            else if (buff_value[0]=='R')
            {
                writeString((char *)"{SYS:RESUME}");
                card.startFileprint();
                writeString((char *)"{SYS:RESUMED}");
            }
            else if (buff_value[0]=='Z')
            {
                /*i=(buff_value[1]-'0')*100 + (buff_value[2]-'0')*10 + (buff_value[3]-'0');
                float pauseAtZPos = i;
                command::pauseAtZPos(stepperAxisMMToSteps(pauseAtZPos, Z_AXIS));*/
            }
            else
            {
                i=(buff_value[0]-'0')*100 + (buff_value[1]-'0')*10 + (buff_value[2]-'0');
                card.getfilename(i);

开发者ID:MalyanSystem，项目名称:Malyan-M180-Marlin，代码行数:67，代码来源:LcdBoard.cpp

示例16: StopPopCallback

 void StopPopCallback(void *ptr) {
   quickStop();
   card.stopPrint();
   autotempShutdown();
   lcd_setstatus(MSG_PRINT_ABORTED, true);
 }

开发者ID:bloutix，项目名称:MarlinKimbra，代码行数:6，代码来源:Nextion_lcd.cpp

注：本文中的quickStop函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ quick_sort函数代码示例发布时间：2022-05-30

C++ quickSort函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19190|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ quickStop函数代码示例

示例1: st_synchronize

示例2: st_synchronize

示例3: checkHitEndstops

示例4: checkHitEndstops

示例5: checkHitEndstops

示例6: st_synchronize

示例7: lcd_sdcard_stop

示例8: st_synchronize

示例9: lcd_sdcard_stop

示例10: lcd_sdcard_stop

示例11: checkHitEndstops

示例12: checkHitEndstops

示例13: lcd_sdcard_stop

示例14: checkHitEndstops

示例15: process

示例16: StopPopCallback

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

PureSwift/BluetoothLinux: Pure Swift Lin

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053