C++ qreply函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中qreply函数的典型用法代码示例。如果您正苦于以下问题：C++ qreply函数的具体用法？C++ qreply怎么用？C++ qreply使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了qreply函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: handle_dump

void handle_dump(queue_t *q, mblk_t *mp)
{
    struct ctrl_args *ctrl_args;
    struct ctrl_device *ctrlfd;
    minor_t minor;
    int sum;
    unsigned char *buf;

    if ((mp->b_cont = allocb(MAXPRINTBUF, BPRI_MED)) == NULL) {
	printf("handle_ctrl: out of message blocks\n");
	qreply(q, mp);
	return;
    }

    buf = DB_BASE(mp->b_cont);
    sum = rpc_dump(buf, buf + MAXPRINTBUF);
    sum += port_dump(buf + sum, buf + MAXPRINTBUF);
    sum += kid_dump(buf + sum, buf + MAXPRINTBUF);
    sum += flip_netdump(buf + sum, buf + MAXPRINTBUF);
    sum += int_dump(buf + sum, buf + MAXPRINTBUF);
    sum += adr_dump(buf + sum, buf + MAXPRINTBUF);
    sum += ff_dump(buf + sum, buf + MAXPRINTBUF);
    mp->b_cont->b_rptr = DB_BASE(mp->b_cont);
    mp->b_cont->b_wptr = mp->b_cont->b_rptr + sum;

    ctrl_args = (struct ctrl_args *) DB_BASE(mp);
    ctrl_args->ctrl_status = sum;

    mp->b_rptr = DB_BASE(mp);
    mp->b_wptr = mp->b_rptr + sizeof(struct ctrl_args);
    DB_TYPE(mp) = M_PROTO;

    qreply(q, mp);
}

开发者ID:yeonsh，项目名称:Amoeba，代码行数:34，代码来源:ux_ctrl_int.c

示例2: logi_wput

static int
logi_wput(queue_t *q, mblk_t *mp)
{
	struct iocblk *iocbp;
	struct strmseinfo *logiptr;

#ifdef LOGI_DEBUG
	if (logi_debug)
		printf("logi_wput:entered\n");
#endif
	logiptr = q->q_ptr;
	if (logiptr == 0) {
		freemsg(mp);
#ifdef LOGI_DEBUG
		if (logi_debug)
			printf("logi_wput:logiptr == NULL\n");
#endif
		return (0);
	}
	iocbp = (struct iocblk *)mp->b_rptr;
	switch (mp->b_datap->db_type) {
		case M_FLUSH:
#ifdef LOGI_DEBUG
			if (logi_debug)
				printf("logi_wput:M_FLUSH\n");
#endif
			if (*mp->b_rptr & FLUSHW)
				flushq(q, FLUSHDATA);
			qreply(q, mp);
			break;
		case M_IOCTL:
#ifdef LOGI_DEBUG
			if (logi_debug)
				printf("logi_wput:M_IOCTL\n");
#endif
			mp->b_datap->db_type = M_IOCNAK;
			iocbp->ioc_rval = 0;
			iocbp->ioc_error = EINVAL;
			qreply(q, mp);
			break;
		case M_IOCDATA:
#ifdef LOGI_DEBUG
			if (logi_debug)
				printf("logi_wput:M_IOCDATA\n");
#endif
			mp->b_datap->db_type = M_IOCNAK;
			iocbp->ioc_rval = 0;
			iocbp->ioc_error = EINVAL;
			qreply(q, mp);
			break;
		default:
			freemsg(mp);
			break;
	}
#ifdef LOGI_DEBUG
	if (logi_debug)
		printf("logi_wput:leaving\n");
#endif
	return (0);
}

开发者ID:andreiw，项目名称:polaris，代码行数:60，代码来源:logi.c

示例3: getfields

/*
 *  generic query lookup.  The query is of one of the following
 *  forms:
 *
 *  attr1=val1 attr2=val2 attr3=val3 ...
 *
 *  returns the matching tuple
 *
 *  ipinfo attr=val attr1 attr2 attr3 ...
 *
 *  is like ipinfo and returns the attr{1-n}
 *  associated with the ip address.
 */
static char *genquery(struct mfile *mf, char *query)
{
	int i, n;
	char *p;
	char *attr[Maxattr];
	char *val[Maxattr];
	struct ndbtuple *t;
	struct ndbs s;

	n = getfields(query, attr, COUNT_OF(attr), 1, " ");
	if (n == 0)
		return "bad query";

	if (strcmp(attr[0], "ipinfo") == 0)
		return ipinfoquery(mf, attr, n);

	/* parse pairs */
	for (i = 0; i < n; i++) {
		p = strchr(attr[i], '=');
		if (p == 0)
			return "bad query";
		*p++ = 0;
		val[i] = p;
	}

	/* give dns a chance */
	if ((strcmp(attr[0], "dom") == 0 || strcmp(attr[0], "ip") == 0)
	    && val[0]) {
		t = dnsiplookup(val[0], &s);
		if (t) {
			if (qmatch(t, attr, val, n)) {
				qreply(mf, t);
				ndbfree(t);
				return 0;
			}
			ndbfree(t);
		}
	}

	/* first pair is always the key.  It can't be a '*' */
	t = ndbsearch(db, &s, attr[0], val[0]);

	/* search is the and of all the pairs */
	while (t) {
		if (qmatch(t, attr, val, n)) {
			qreply(mf, t);
			ndbfree(t);
			return 0;
		}

		ndbfree(t);
		t = ndbsnext(&s, attr[0], val[0]);
	}

	return "no match";
}

开发者ID:brho，项目名称:akaros，代码行数:69，代码来源:cs.c

示例4: oplmsu_rcmn_flush_hndl

/*
 * Flush handle for read side stream
 *
 * Requires lock ( M: mandatory  P: prohibited  A: allowed
 *  -. uinst_t->lock   : M [RW_READER]
 *  -. uinst_t->u_lock : P
 *  -. uinst_t->l_lock : P
 *  -. uinst_t->c_lock : P
 */
void
oplmsu_rcmn_flush_hndl(queue_t *q, mblk_t *mp)
{
	queue_t	*dst_queue = NULL;
	ctrl_t	*ctrl;

	ASSERT(RW_READ_HELD(&oplmsu_uinst->lock));

	if (*mp->b_rptr & FLUSHR) {
		/* Remove only data messages from read queue */
		flushq(q, FLUSHDATA);
	}

	mutex_enter(&oplmsu_uinst->c_lock);
	if ((ctrl = oplmsu_uinst->user_ctrl) != NULL) {
		dst_queue = RD(ctrl->queue);
		mutex_exit(&oplmsu_uinst->c_lock);

		if (dst_queue != NULL) {
			putq(dst_queue, mp);
		} else {
			if (*mp->b_rptr & FLUSHW) {
				flushq(WR(q), FLUSHDATA);
				*mp->b_rptr &= ~FLUSHR;

				rw_exit(&oplmsu_uinst->lock);
				OPLMSU_TRACE(q, mp, MSU_TRC_LO);
				qreply(q, mp);
				rw_enter(&oplmsu_uinst->lock, RW_READER);
			} else {
				freemsg(mp);
			}
		}
	} else {
		mutex_exit(&oplmsu_uinst->c_lock);
		if (*mp->b_rptr & FLUSHW) {
			flushq(WR(q), FLUSHDATA);
			*mp->b_rptr &= ~FLUSHR;

			rw_exit(&oplmsu_uinst->lock);
			OPLMSU_TRACE(q, mp, MSU_TRC_LO);
			qreply(q, mp);
			rw_enter(&oplmsu_uinst->lock, RW_READER);
		} else {
			freemsg(mp);
		}
	}
}

开发者ID:andreiw，项目名称:polaris，代码行数:57，代码来源:oplmsu_cmn_func.c

示例5: oplmsu_wcmn_flush_hndl

/*
 * Flush handle for write side stream
 *
 * Requires Lock (( M: Mandatory, P: Prohibited, A: Allowed ))
 *  -. uinst_t->lock   : M [RW_READER or RW_WRITER]
 *  -. uinst_t->u_lock : P
 *  -. uinst_t->l_lock : P
 *  -. uinst_t->c_lock : P
 */
void
oplmsu_wcmn_flush_hndl(queue_t *q, mblk_t *mp, krw_t rw)
{
	queue_t	*dst_queue = NULL;

	ASSERT(RW_LOCK_HELD(&oplmsu_uinst->lock));

	if (*mp->b_rptr & FLUSHW) {	/* Write side */
		flushq(q, FLUSHDATA);
	}

	dst_queue = oplmsu_uinst->lower_queue;
	if (dst_queue == NULL) {
		if (*mp->b_rptr & FLUSHR) {
			flushq(RD(q), FLUSHDATA);
			*mp->b_rptr &= ~FLUSHW;

			rw_exit(&oplmsu_uinst->lock);
			OPLMSU_TRACE(q, mp, MSU_TRC_UO);
			qreply(q, mp);
			rw_enter(&oplmsu_uinst->lock, rw);
		} else {
			freemsg(mp);
		}
	} else {
		putq(WR(dst_queue), mp);
	}
}

开发者ID:andreiw，项目名称:polaris，代码行数:37，代码来源:oplmsu_cmn_func.c

示例6: sscop_w_flush

/*
 *  -------------------------------------------------------------------------
 *
 *  M_FLUSH Handling
 *
 *  -------------------------------------------------------------------------
 */
STATIC inline void
sscop_w_flush(queue_t *q, mblk_t *mp)
{
	if (*mp->b_rptr & FLUSHW) {
		if (*mp->b_rptr & FLUSHBAND)
			flushband(q, mp->b_rptr[1], FLUSHDATA);
		else
			flushq(q, FLUSHDATA);
		if (q - q_next) {
			putnext(q, mp);
			return;
		}
		*mp->b_rptr &= ~FLUSHW;
	}
	if (*mp->b_rptr & FLUSHR) {
		if (*mp->b_rptr & FLUSHBAND)
			flushband(RD(q), mp->b_rptr[1], FLUSHDATA);
		else
			flushq(RD(q), FLUSHDATA);
		qreply(q, mp);
		return;
	}
	if (q->q_next) {
		putnext(q, mp);
		return;
	}
}

开发者ID:Aniruddha-Paul，项目名称:openss7，代码行数:34，代码来源:sscop_t.c

示例7: n_data_ind

/*
 *  N_DATA_IND
 *  -------------------------------------------------------------------------
 *  This is translated into SUA messages and fed to the state machines.
 */
static int
n_data_ind(queue_t *q, mblk_t *pdu)
{
	int err;
	mblk_t *mp;
	N_data_ind_t *p;

	p = (N_data_ind_t *) pdu->b_rptr;
	if (p->DATA_xfer_flags & N_MORE_DATA_FLAG) {
		/* aaargh! */
		/* give it to management */
		if ((err = lm_event_ind(q, pdu)))
			return (err);
		if ((err = m3ua_sp_down(q)))
			return (err);
		qdisable(q);
		return (0);
	}
	if (p->DATA_xfer_flags & N_RC_FLAG) {
		/* need to send receipt confirmation */
		if (!(mp = n_datack_ind()))
			return (-ENOBUFS);
		qreply(q, mp);
	}
	/* only need the M_DATA block */
	mp = pdu->b_cont;
	mp->b_band = 0;
	freeb(pdu);
	if ((err = m3ua_recv_msg(q, mp)))
		return (err);
	return (0);
}

开发者ID:iHaD，项目名称:openss7，代码行数:37，代码来源:m3ua_nsp.c

示例8: lmi_info_ack

/*
 *  LMI_INFO_ACK
 *  -----------------------------------
 */
STATIC INLINE int
lmi_info_ack(queue_t *q, long state, caddr_t ppa_ptr, size_t ppa_len)
{
	mblk_t *mp;
	lmi_info_ack_t *p;

	if ((mp = ss7_allocb(q, sizeof(*p) + ppa_len, BPRI_MED))) {
		mp->b_datap->db_type = M_PCPROTO;
		p = (typeof(p)) mp->b_wptr;
		p->lmi_primitive = LMI_INFO_ACK;
		p->lmi_version = 1;
		p->lmi_state = state;
		p->lmi_max_sdu = 8;
		p->lmi_min_sdu = 8;
		p->lmi_header_len = 0;
		p->lmi_ppa_style = LMI_STYLE1;
		p->lmi_ppa_length = ppa_len;
		p->lmi_ppa_offset = sizeof(*p);
		p->lmi_prov_state = SDL_CONNECTED;
		p->lmi_prov_flags = SDL_RX_DIRECTION | SDL_TX_DIRECTION;
		mp->b_wptr += sizeof(*p);
		bcopy(ppa_ptr, mp->b_wptr, ppa_len);
		mp->b_wptr += ppa_len;
		qreply(q, mp);
		return (QR_DONE);
	}
	rare();
	return (-ENOBUFS);
}

开发者ID:Aniruddha-Paul，项目名称:openss7，代码行数:33，代码来源:spm.c

示例9: mouse8042_process_msg

static int
mouse8042_process_msg(queue_t *q, mblk_t *mp, struct mouse_state *state)
{
	struct iocblk *iocbp;
	int rv = 0;

	iocbp = (struct iocblk *)mp->b_rptr;

	switch (mp->b_datap->db_type) {
	case M_FLUSH:
		if (*mp->b_rptr & FLUSHW) {
			flushq(q, FLUSHDATA);
			*mp->b_rptr &= ~FLUSHW;
		}
		if (*mp->b_rptr & FLUSHR) {
			qreply(q, mp);
		} else
			freemsg(mp);
		break;
	case M_IOCTL:
		mouse8042_iocnack(q, mp, iocbp, EINVAL, 0);
		break;
	case M_IOCDATA:
		mouse8042_iocnack(q, mp, iocbp, EINVAL, 0);
		break;
	case M_DATA:
		rv = mouse8042_process_data_msg(q, mp, state);
		break;
	default:
		freemsg(mp);
		break;
	}

	return (rv);
}

开发者ID:MatiasNAmendola，项目名称:AuroraUX-SunOS，代码行数:35，代码来源:mouse8042.c

示例10: miocnak

void miocnak(queue_t *pWriteQueue, mblk_t *pMBlk, int cbData, int iErr)
{
    struct iocblk *pIOCBlk = (struct iocblk *)pMBlk->b_rptr;

    pMBlk->b_datap->db_type = M_IOCNAK;
    pIOCBlk->ioc_count = cbData;
    pIOCBlk->ioc_error = iErr ? iErr : EINVAL;
    pIOCBlk->ioc_rval = 0;
    qreply(pWriteQueue, pMBlk);
}

开发者ID:Rootkitsmm，项目名称:virtualbox-org-svn-vbox-trunk，代码行数:10，代码来源:tstVBoxMouse-solaris.c

示例11: miocack

void miocack(queue_t *pWriteQueue, mblk_t *pMBlk, int cbData, int rc)
{
    struct iocblk *pIOCBlk = (struct iocblk *)pMBlk->b_rptr;

    pMBlk->b_datap->db_type = M_IOCACK;
    pIOCBlk->ioc_count = cbData;
    pIOCBlk->ioc_rval = rc;
    pIOCBlk->ioc_error = 0;
    qreply(pWriteQueue, pMBlk);
}

开发者ID:Rootkitsmm，项目名称:virtualbox-org-svn-vbox-trunk，代码行数:10，代码来源:tstVBoxMouse-solaris.c

示例12: vml_iocdata

/*
 * vml_iocdata() -
 * Handle the M_IOCDATA messages associated with
 * a request to validate a module list.
 */
static void
vml_iocdata(
	queue_t *qp,	/* pointer to write queue */
	mblk_t *mp)	/* message pointer */
{
	long i;
	int	nmods;
	struct copyresp *csp;
	struct str_mlist *lp;
	STRUCT_HANDLE(str_list, slp);
	struct saddev *sadp;

	csp = (struct copyresp *)mp->b_rptr;
	if (csp->cp_rval) {	/* if there was an error */
		freemsg(mp);
		return;
	}

	ASSERT(csp->cp_cmd == SAD_VML);
	sadp = (struct saddev *)qp->q_ptr;
	switch ((long)csp->cp_private) {
	case GETSTRUCT:
		STRUCT_SET_HANDLE(slp, csp->cp_flag,
		    (struct str_list *)mp->b_cont->b_rptr);
		nmods = STRUCT_FGET(slp, sl_nmods);
		if (nmods <= 0) {
			miocnak(qp, mp, 0, EINVAL);
			break;
		}
		sadp->sa_addr = (caddr_t)(uintptr_t)nmods;

		mcopyin(mp, (void *)GETLIST, nmods * sizeof (struct str_mlist),
		    STRUCT_FGETP(slp, sl_modlist));
		qreply(qp, mp);
		break;

	case GETLIST:
		lp = (struct str_mlist *)mp->b_cont->b_rptr;
		for (i = 0; i < (long)sadp->sa_addr; i++, lp++) {
			lp->l_name[FMNAMESZ] = '\0';
			if (fmodsw_find(lp->l_name, FMODSW_LOAD) == NULL) {
				miocack(qp, mp, 0, 1);
				return;
			}
		}
		miocack(qp, mp, 0, 0);
		break;

	default:
		cmn_err(CE_WARN, "vml_iocdata: invalid cp_private value: %p",
		    (void *)csp->cp_private);
		freemsg(mp);
		break;
	} /* switch (cp_private) */
}

开发者ID:andreiw，项目名称:polaris，代码行数:60，代码来源:sad.c

示例13: ss7_error_reply

/*
 *  =========================================================================
 *
 *  SCCP-User --> SUA (ASP) Downstream Primitives
 *
 *  =========================================================================
 */
static inline
ss7_error_reply(queue_t *q, mblk_t *pdu, int prim, int err)
{
	mblk_t *mp;

	if ((mp = sccp_error_ack(prim, err))) {
		freemsg(pdu);
		qreply(q, mp);
		return (0);
	}
	return (-ENOBUFS);
}

开发者ID:iHaD，项目名称:openss7，代码行数:19，代码来源:sua_ss7.c

示例14: mouse8042_iocnack

static void
mouse8042_iocnack(
    queue_t *qp,
    mblk_t *mp,
    struct iocblk *iocp,
    int error,
    int rval)
{
	mp->b_datap->db_type = M_IOCNAK;
	iocp->ioc_rval = rval;
	iocp->ioc_error = error;
	qreply(qp, mp);
}

开发者ID:MatiasNAmendola，项目名称:AuroraUX-SunOS，代码行数:13，代码来源:mouse8042.c

示例15: m_error

STATIC int
m_error(queue_t *q, int err)
{
	mblk_t *mp;

	if ((mp = ss7_allocb(q, 2, BPRI_MED))) {
		mp->b_datap->db_type = M_ERROR;
		*(mp->b_wptr)++ = err < 0 ? -err : err;
		*(mp->b_wptr)++ = err < 0 ? -err : err;
		qreply(q, mp);
		return (QR_DONE);
	}
	rare();
	return (-ENOBUFS);
}

开发者ID:Aniruddha-Paul，项目名称:openss7，代码行数:15，代码来源:spm.c

示例16: oplmsu_iocack

/*
 * Send M_IOCACK(or M_IOCNAK) message to stream
 *
 * Requires Lock (( M: Mandatory, P: Prohibited, A: Allowed ))
 *  -. uinst_t->lock   : P
 *  -. uinst_t->u_lock : P
 *  -. uinst_t->l_lock : P
 *  -. uinst_t->c_lock : P
 */
void
oplmsu_iocack(queue_t *q, mblk_t *mp, int errno)
{
	struct iocblk	*iocp = NULL;

	ASSERT(mp != NULL);

	iocp = (struct iocblk *)mp->b_rptr;
	iocp->ioc_error = errno;

	if (errno) {	/* Error */
		mp->b_datap->db_type = M_IOCNAK;
		iocp->ioc_rval = FAILURE;

		OPLMSU_TRACE(q, mp, MSU_TRC_UO);
		qreply(q, mp);
	} else {	/* Good */
		mp->b_datap->db_type = M_IOCACK;
		iocp->ioc_rval = SUCCESS;

		OPLMSU_TRACE(q, mp, MSU_TRC_UO);
		qreply(q, mp);
	}
}

开发者ID:andreiw，项目名称:polaris，代码行数:33，代码来源:oplmsu_cmn_func.c

示例17: vml_ioctl

/*
 * vml_ioctl() -
 * Handle the M_IOCTL message associated with a request
 * to validate a module list.
 */
static void
vml_ioctl(
	queue_t *qp,	/* pointer to write queue */
	mblk_t *mp)	/* message pointer */
{
	struct iocblk *iocp;

	iocp = (struct iocblk *)mp->b_rptr;
	if (iocp->ioc_count != TRANSPARENT) {
		miocnak(qp, mp, 0, EINVAL);
		return;
	}
	ASSERT(iocp->ioc_cmd == SAD_VML);
	mcopyin(mp, (void *)GETSTRUCT,
	    SIZEOF_STRUCT(str_list, iocp->ioc_flag), NULL);
	qreply(qp, mp);
}

开发者ID:andreiw，项目名称:polaris，代码行数:22，代码来源:sad.c

示例18: kb8042_wsrv

static int
kb8042_wsrv(queue_t *qp)
{
	struct kb8042 *kb8042;

	mblk_t	*mp;

	kb8042 = (struct kb8042 *)qp->q_ptr;

	while ((mp = getq(qp))) {
		switch (kbtrans_streams_message(kb8042->hw_kbtrans, mp)) {
		case KBTRANS_MESSAGE_HANDLED:
			continue;
		case KBTRANS_MESSAGE_NOT_HANDLED:
			break;
		}
		switch (mp->b_datap->db_type) {
		case M_IOCTL:
			kb8042_ioctlmsg(kb8042, qp, mp);
			continue;
		case M_IOCDATA:
			kb8042_iocdatamsg(qp, mp);
			continue;
		case M_DELAY:
		case M_STARTI:
		case M_STOPI:
		case M_READ:	/* ignore, no buffered data */
			freemsg(mp);
			continue;
		case M_FLUSH:
			*mp->b_rptr &= ~FLUSHW;
			if (*mp->b_rptr & FLUSHR)
				qreply(qp, mp);
			else
				freemsg(mp);
			continue;
		default:
			cmn_err(CE_NOTE, "kb8042_wsrv: bad msg %x",
						mp->b_datap->db_type);
			freemsg(mp);
			continue;
		}
	}
	return (0);
}

开发者ID:andreiw，项目名称:polaris，代码行数:45，代码来源:kb8042.c

示例19: lmi_disable_con

/*
 *  LMI_DISABLE_CON
 *  -----------------------------------
 */
STATIC INLINE int
lmi_disable_con(queue_t *q, long state)
{
	mblk_t *mp;
	lmi_disable_con_t *p;

	if ((mp = ss7_allocb(q, sizeof(*p), BPRI_MED))) {
		mp->b_datap->db_type = M_PCPROTO;
		p = (typeof(p)) mp->b_wptr;
		mp->b_wptr += sizeof(*p);
		p->lmi_primitive = LMI_DISABLE_CON;
		p->lmi_state = state;
		qreply(q, mp);
		return (QR_DONE);
	}
	rare();
	return (-ENOBUFS);
}

开发者ID:Aniruddha-Paul，项目名称:openss7，代码行数:22，代码来源:spm.c

示例20: rds_info_req

static void
rds_info_req(queue_t *q, mblk_t *omp)
{
	rds_t *rds = (rds_t *)q->q_ptr;
	struct T_info_ack *tap;
	mblk_t *mp;

	/* Create a T_INFO_ACK message. */
	mp = tpi_ack_alloc(omp, sizeof (struct T_info_ack), M_PCPROTO,
	    T_INFO_ACK);
	if (mp == NULL)
		return;
	tap = (struct T_info_ack *)(uintptr_t)mp->b_rptr;
	*tap = rds_g_t_info_ack_ipv4;
	tap->CURRENT_state = rds->rds_state;
	tap->OPT_size = 128;
	qreply(q, mp);
}

开发者ID:MatiasNAmendola，项目名称:AuroraUX-SunOS，代码行数:18，代码来源:rdsddi.c

注：本文中的qreply函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ qry函数代码示例发布时间：2022-05-30

C++ qreal函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19190|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ qreply函数代码示例

示例1: handle_dump

示例2: logi_wput

示例3: getfields

示例4: oplmsu_rcmn_flush_hndl

示例5: oplmsu_wcmn_flush_hndl

示例6: sscop_w_flush

示例7: n_data_ind

示例8: lmi_info_ack

示例9: mouse8042_process_msg

示例10: miocnak

示例11: miocack

示例12: vml_iocdata

示例13: ss7_error_reply

示例14: mouse8042_iocnack

示例15: m_error

示例16: oplmsu_iocack

示例17: vml_ioctl

示例18: kb8042_wsrv

示例19: lmi_disable_con

示例20: rds_info_req

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

PureSwift/BluetoothLinux: Pure Swift Lin

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053