C++ qdev_set_nic_properties函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中qdev_set_nic_properties函数的典型用法代码示例。如果您正苦于以下问题：C++ qdev_set_nic_properties函数的具体用法？C++ qdev_set_nic_properties怎么用？C++ qdev_set_nic_properties使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了qdev_set_nic_properties函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: beagle_common_init

static void beagle_common_init(ram_addr_t ram_size,
                        const char *boot_device,
                        const char *kernel_filename,
                        const char *kernel_cmdline,
                        const char *initrd_filename,
                        int cpu_model)
{
    struct beagle_s *s = (struct beagle_s *) qemu_mallocz(sizeof(*s));
    DriveInfo *dmtd = drive_get(IF_MTD, 0, 0);
    DriveInfo *dsd  = drive_get(IF_SD, 0, 0);

    if (!dmtd && !dsd) {
        hw_error("%s: SD or NAND image required", __FUNCTION__);
    }
#if MAX_SERIAL_PORTS < 1
#error MAX_SERIAL_PORTS must be at least 1!
#endif
    s->cpu = omap3_mpu_init(cpu_model, 1, ram_size,
                            NULL, NULL, serial_hds[0], NULL);

    s->nand = nand_init(NAND_MFR_MICRON, 0xba, dmtd ? dmtd->bdrv : NULL);
    nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
    omap_gpmc_attach(s->cpu->gpmc, BEAGLE_NAND_CS, s->nand, 0, 2);

    if (dsd) {
        omap3_mmc_attach(s->cpu->omap3_mmc[0], dsd->bdrv, 0, 0);
    }

    s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c, 0),
                              s->cpu->irq[0][OMAP_INT_3XXX_SYS_NIRQ],
                              NULL, NULL);
    int i;
    for (i = 0; i < nb_nics; i++) {
        if (!nd_table[i].model || !strcmp(nd_table[i].model, "smc91c111")) {
            break;
        }
    }
    if (cpu_model == omap3430) {
        qemu_set_irq(qdev_get_gpio_in(s->cpu->gpio, BEAGLE_GPIO_ID1),1);
        qemu_set_irq(qdev_get_gpio_in(s->cpu->gpio, BEAGLE_GPIO_ID3),1);
    }
    if (i < nb_nics) {
        s->smc = qdev_create(NULL, "smc91c111");
        qdev_set_nic_properties(s->smc, &nd_table[i]);
        qdev_init_nofail(s->smc);
        sysbus_connect_irq(sysbus_from_qdev(s->smc), 0,
                           qdev_get_gpio_in(s->cpu->gpio, 54));
    } else {
        hw_error("%s: no NIC for smc91c111\n", __FUNCTION__);
    }
    omap_gpmc_attach(s->cpu->gpmc, BEAGLE_SMC_CS, s->smc, 0, 0);

    /* Wire up an I2C slave which returns EDID monitor information;
     * newer Linux kernels won't turn on the display unless they
     * detect a monitor over DDC.
     */
    s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c, 2), "i2c-ddc", 0x50);

    omap_lcd_panel_attach(s->cpu->dss);
}

开发者ID:hongjiujing，项目名称:Opensource，代码行数:60，代码来源:beagle.c

示例2: lx60_net_init

static void lx60_net_init(MemoryRegion *address_space,
        target_phys_addr_t base,
        target_phys_addr_t descriptors,
        target_phys_addr_t buffers,
        qemu_irq irq, NICInfo *nd)
{
    DeviceState *dev;
    SysBusDevice *s;
    MemoryRegion *ram;

    dev = qdev_create(NULL, "open_eth");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);

    s = sysbus_from_qdev(dev);
    sysbus_connect_irq(s, 0, irq);
    memory_region_add_subregion(address_space, base,
            sysbus_mmio_get_region(s, 0));
    memory_region_add_subregion(address_space, descriptors,
            sysbus_mmio_get_region(s, 1));

    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, "open_eth.ram", 16384);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space, buffers, ram);
}

开发者ID:0bliv10n，项目名称:s2e，代码行数:26，代码来源:xtensa_lx60.c

示例3: lx60_net_init

static void lx60_net_init(MemoryRegion *address_space,
        hwaddr base,
        hwaddr descriptors,
        hwaddr buffers,
        qemu_irq irq, NICInfo *nd)
{
    DeviceState *dev;
    SysBusDevice *s;
    MemoryRegion *ram;

    dev = qdev_create(NULL, "open_eth");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);

    s = SYS_BUS_DEVICE(dev);
    sysbus_connect_irq(s, 0, irq);
    memory_region_add_subregion(address_space, base,
            sysbus_mmio_get_region(s, 0));
    memory_region_add_subregion(address_space, descriptors,
            sysbus_mmio_get_region(s, 1));

    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, OBJECT(s), "open_eth.ram", 16384,
                           &error_fatal);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space, buffers, ram);
}

开发者ID:JeremyAgost，项目名称:qemu，代码行数:27，代码来源:xtfpga.c

示例4: overo_init

static void overo_init(ram_addr_t ram_size,
                       const char *boot_device,
                       const char *kernel_filename,
                       const char *kernel_cmdline,
                       const char *initrd_filename,
                       const char *cpu_model)
{
    struct overo_s *s = (struct overo_s *) g_malloc0(sizeof(*s));
    DriveInfo *dmtd = drive_get(IF_MTD, 0, 0);
    DriveInfo *dsd  = drive_get(IF_SD, 0, 0);

    if (ram_size > 1024 * 1024 * 1024) {
        fprintf(stderr, "overo: maximum permitted RAM size 1024MB\n");
        exit(1);
    }

    if (!dmtd && !dsd) {
        hw_error("%s: SD or NAND image required", __FUNCTION__);
    }
    s->cpu = omap3_mpu_init(omap3430, ram_size,
                            NULL, NULL, serial_hds[0], NULL);

    s->nand = nand_init(dmtd ? dmtd->bdrv : NULL, NAND_MFR_MICRON, 0xba);
    nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
    omap_gpmc_attach_nand(s->cpu->gpmc, OVERO_NAND_CS, s->nand);

    if (dsd) {
        omap3_mmc_attach(s->cpu->omap3_mmc[0], dsd->bdrv, 0, 0);
    }

    /* FAB revs >= 2516: 4030 interrupt is GPIO 0 (earlier ones were 112) */
    s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c, 0),
                              qdev_get_gpio_in(s->cpu->gpio, 0),
                              NULL, NULL);

    /* Wire up an I2C slave which returns EDID monitor information;
     * newer Linux kernels won't turn on the display unless they
     * detect a monitor over DDC.
     */
    s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c, 2), "i2c-ddc", 0x50);

    omap_lcd_panel_attach(s->cpu->dss);

    /* Strictly this should be a LAN9221 */
    if (nd_table[0].vlan) {
        /* The ethernet chip hangs off the GPMC */
        NICInfo *nd = &nd_table[0];
        qemu_check_nic_model(nd, "lan9118");
        s->eth = qdev_create(NULL, "lan9118");
        qdev_set_nic_properties(s->eth, nd);
        qdev_init_nofail(s->eth);
        omap_gpmc_attach(s->cpu->gpmc, OVERO_NET_CS,
                         sysbus_mmio_get_region(sysbus_from_qdev(s->eth), 0));
        sysbus_connect_irq(sysbus_from_qdev(s->eth), 0,
                           qdev_get_gpio_in(s->cpu->gpio, 176));
    }
}

开发者ID:fromYtoY，项目名称:qemu-trustzone，代码行数:57，代码来源:overo.c

示例5: spapr_vlan_create

void spapr_vlan_create(VIOsPAPRBus *bus, NICInfo *nd)
{
    DeviceState *dev;

    dev = qdev_create(&bus->bus, "spapr-vlan");

    qdev_set_nic_properties(dev, nd);

    qdev_init_nofail(dev);
}

开发者ID:BreakawayConsulting，项目名称:QEMU，代码行数:10，代码来源:spapr_llan.c

示例6: gem_init

static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq)
{
    DeviceState *dev;
    SysBusDevice *s;

    qemu_check_nic_model(nd, "cadence_gem");
    dev = qdev_create(NULL, "cadence_gem");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);
    s = sysbus_from_qdev(dev);
    sysbus_mmio_map(s, 0, base);
    sysbus_connect_irq(s, 0, irq);
}

开发者ID:RafaelRMachado，项目名称:qemu，代码行数:13，代码来源:xilinx_zynq.c

示例7: smc91c111_init

/* Legacy helper function.  Should go away when machine config files are
   implemented.  */
void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
{
    DeviceState *dev;
    SysBusDevice *s;

    qemu_check_nic_model(nd, "smc91c111");
    dev = qdev_create(NULL, "smc91c111");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);
    s = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(s, 0, base);
    sysbus_connect_irq(s, 0, irq);
}

开发者ID:JonahAragon，项目名称:qemu，代码行数:15，代码来源:smc91c111.c

示例8: mipsnet_init

static void mipsnet_init(int base, qemu_irq irq, NICInfo *nd)
{
    DeviceState *dev;
    SysBusDevice *s;

    dev = qdev_create(NULL, "mipsnet");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);

    s = SYS_BUS_DEVICE(dev);
    sysbus_connect_irq(s, 0, irq);
    memory_region_add_subregion(get_system_io(),
                                base,
                                sysbus_mmio_get_region(s, 0));
}

开发者ID:RodgerNO1，项目名称:qemu，代码行数:15，代码来源:mips_mipssim.c

示例9: lan9215_init

static void lan9215_init(uint32_t base, qemu_irq irq)
{
    DeviceState *dev;
    SysBusDevice *s;

    /* This should be a 9215 but the 9118 is close enough */
    if (nd_table[0].used) {
        qemu_check_nic_model(&nd_table[0], "lan9118");
        dev = qdev_create(NULL, "lan9118");
        qdev_set_nic_properties(dev, &nd_table[0]);
        qdev_prop_set_uint32(dev, "mode_16bit", 1);
        qdev_init_nofail(dev);
        s = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(s, 0, base);
        sysbus_connect_irq(s, 0, irq);
    }
}

开发者ID:32bitmicro，项目名称:riscv-qemu，代码行数:17，代码来源:exynos4_boards.c

示例10: qemu_check_nic_model

static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
                                  const char *name, hwaddr size)
{
    SysBusDevice *s;
    NICInfo *nd = &nd_table[0];

    /* In hardware this is a LAN9220; the LAN9118 is software compatible
     * except that it doesn't support the checksum-offload feature.
     */
    qemu_check_nic_model(nd, "lan9118");
    mms->lan9118 = qdev_create(NULL, "lan9118");
    qdev_set_nic_properties(mms->lan9118, nd);
    qdev_init_nofail(mms->lan9118);

    s = SYS_BUS_DEVICE(mms->lan9118);
    sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 16));
    return sysbus_mmio_get_region(s, 0);
}

开发者ID:MaddTheSane，项目名称:qemu，代码行数:18，代码来源:mps2-tz.c

示例11: openrisc_sim_net_init

static void openrisc_sim_net_init(MemoryRegion *address_space,
                                  hwaddr base,
                                  hwaddr descriptors,
                                  qemu_irq irq, NICInfo *nd)
{
    DeviceState *dev;
    SysBusDevice *s;

    dev = qdev_create(NULL, "open_eth");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);

    s = sysbus_from_qdev(dev);
    sysbus_connect_irq(s, 0, irq);
    memory_region_add_subregion(address_space, base,
                                sysbus_mmio_get_region(s, 0));
    memory_region_add_subregion(address_space, descriptors,
                                sysbus_mmio_get_region(s, 1));
}

开发者ID:Jokymon，项目名称:qemu，代码行数:19，代码来源:openrisc_sim.c

示例12: openrisc_sim_net_init

static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
                                  int num_cpus, qemu_irq **cpu_irqs,
                                  int irq_pin, NICInfo *nd)
{
    DeviceState *dev;
    SysBusDevice *s;
    int i;

    dev = qdev_create(NULL, "open_eth");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);

    s = SYS_BUS_DEVICE(dev);
    for (i = 0; i < num_cpus; i++) {
        sysbus_connect_irq(s, 0, cpu_irqs[i][irq_pin]);
    }
    sysbus_mmio_map(s, 0, base);
    sysbus_mmio_map(s, 1, descriptors);
}

开发者ID:CTU-IIG，项目名称:qemu，代码行数:19，代码来源:openrisc_sim.c

示例13: lance_init

static void lance_init(NICInfo *nd, hwaddr leaddr,
                       void *dma_opaque, qemu_irq irq)
{
    DeviceState *dev;
    SysBusDevice *s;
    qemu_irq reset;

    qemu_check_nic_model(&nd_table[0], "lance");

    dev = qdev_create(NULL, "lance");
    qdev_set_nic_properties(dev, nd);
    qdev_prop_set_ptr(dev, "dma", dma_opaque);
    qdev_init_nofail(dev);
    s = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(s, 0, leaddr);
    sysbus_connect_irq(s, 0, irq);
    reset = qdev_get_gpio_in(dev, 0);
    qdev_connect_gpio_out(dma_opaque, 0, reset);
}

开发者ID:Fantu，项目名称:qemu，代码行数:19，代码来源:sun4m.c

示例14: qdev_create

DeviceState *etsec_create(hwaddr         base,
                          MemoryRegion * mr,
                          NICInfo      * nd,
                          qemu_irq       tx_irq,
                          qemu_irq       rx_irq,
                          qemu_irq       err_irq)
{
    DeviceState *dev;

    dev = qdev_create(NULL, "eTSEC");
    qdev_set_nic_properties(dev, nd);
    qdev_init_nofail(dev);

    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, tx_irq);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, rx_irq);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, err_irq);

    memory_region_add_subregion(mr, base,
                                SYS_BUS_DEVICE(dev)->mmio[0].memory);

    return dev;
}

开发者ID:AmesianX，项目名称:panda，代码行数:22，代码来源:etsec.c

示例15: s390_create_virtio_net

void s390_create_virtio_net(BusState *bus, const char *name)
{
    int i;

    for (i = 0; i < nb_nics; i++) {
        NICInfo *nd = &nd_table[i];
        DeviceState *dev;

        if (!nd->model) {
            nd->model = g_strdup("virtio");
        }

        if (strcmp(nd->model, "virtio")) {
            fprintf(stderr, "S390 only supports VirtIO nics\n");
            exit(1);
        }

        dev = qdev_create(bus, name);
        qdev_set_nic_properties(dev, nd);
        qdev_init_nofail(dev);
    }
}

开发者ID:BinaryAnalysisPlatform，项目名称:qemu，代码行数:22，代码来源:s390-virtio.c

示例16: calxeda_init


//.........这里部分代码省略.........
        }
    }

    switch (machine_id) {
    case CALXEDA_HIGHBANK:
        dev = qdev_create(NULL, "l2x0");
        qdev_init_nofail(dev);
        busdev = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(busdev, 0, 0xfff12000);

        dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
        break;
    case CALXEDA_MIDWAY:
        dev = qdev_create(NULL, TYPE_A15MPCORE_PRIV);
        break;
    }
    qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
    qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
    for (n = 0; n < smp_cpus; n++) {
        sysbus_connect_irq(busdev, n, cpu_irq[n]);
        sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]);
    }

    for (n = 0; n < 128; n++) {
        pic[n] = qdev_get_gpio_in(dev, n);
    }

    dev = qdev_create(NULL, "sp804");
    qdev_prop_set_uint32(dev, "freq0", 150000000);
    qdev_prop_set_uint32(dev, "freq1", 150000000);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, 0xfff34000);
    sysbus_connect_irq(busdev, 0, pic[18]);
    pl011_create(0xfff36000, pic[20], serial_hds[0]);

    dev = qdev_create(NULL, TYPE_HIGHBANK_REGISTERS);
    qdev_init_nofail(dev);
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, 0xfff3c000);

    sysbus_create_simple("pl061", 0xfff30000, pic[14]);
    sysbus_create_simple("pl061", 0xfff31000, pic[15]);
    sysbus_create_simple("pl061", 0xfff32000, pic[16]);
    sysbus_create_simple("pl061", 0xfff33000, pic[17]);
    sysbus_create_simple("pl031", 0xfff35000, pic[19]);
    sysbus_create_simple("pl022", 0xfff39000, pic[23]);

    sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]);

    if (nd_table[0].used) {
        qemu_check_nic_model(&nd_table[0], "xgmac");
        dev = qdev_create(NULL, "xgmac");
        qdev_set_nic_properties(dev, &nd_table[0]);
        qdev_init_nofail(dev);
        sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000);
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]);
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]);
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]);

        qemu_check_nic_model(&nd_table[1], "xgmac");
        dev = qdev_create(NULL, "xgmac");
        qdev_set_nic_properties(dev, &nd_table[1]);
        qdev_init_nofail(dev);
        sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000);
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]);
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]);
        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]);
    }

    /* TODO create and connect IDE devices for ide_drive_get() */

    highbank_binfo.ram_size = ram_size;
    highbank_binfo.kernel_filename = kernel_filename;
    highbank_binfo.kernel_cmdline = kernel_cmdline;
    highbank_binfo.initrd_filename = initrd_filename;
    /* highbank requires a dtb in order to boot, and the dtb will override
     * the board ID. The following value is ignored, so set it to -1 to be
     * clear that the value is meaningless.
     */
    highbank_binfo.board_id = -1;
    highbank_binfo.nb_cpus = smp_cpus;
    highbank_binfo.loader_start = 0;
    highbank_binfo.write_secondary_boot = hb_write_secondary;
    highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
    if (!kvm_enabled()) {
        highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR;
        highbank_binfo.write_board_setup = hb_write_board_setup;
        highbank_binfo.secure_board_setup = true;
    } else {
        warn_report("cannot load built-in Monitor support "
                    "if KVM is enabled. Some guests (such as Linux) "
                    "may not boot.");
    }

    arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
}

开发者ID:CRYP706URU，项目名称:pyrebox，代码行数:101，代码来源:highbank.c

示例17: petalogix_ml605_init

static void
petalogix_ml605_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    MemoryRegion *address_space_mem = get_system_memory();
    DeviceState *dev, *dma, *eth0;
    Object *ds, *cs;
    MicroBlazeCPU *cpu;
    SysBusDevice *busdev;
    DriveInfo *dinfo;
    int i;
    MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32];

    /* init CPUs */
    cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
    object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
    /* Use FPU but don't use floating point conversion and square
     * root instructions
     */
    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
                             &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);

    /* Attach emulated BRAM through the LMB.  */
    memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
                           LMB_BRAM_SIZE, &error_fatal);
    vmstate_register_ram_global(phys_lmb_bram);
    memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);

    memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
                           &error_fatal);
    vmstate_register_ram_global(phys_ram);
    memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    /* 5th parameter 2 means bank-width
     * 10th paremeter 0 means little-endian */
    pflash_cfi01_register(FLASH_BASEADDR,
                          NULL, "petalogix_ml605.flash", FLASH_SIZE,
                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
                          (64 * 1024), FLASH_SIZE >> 16,
                          2, 0x89, 0x18, 0x0000, 0x0, 0);


    dev = qdev_create(NULL, "xlnx.xps-intc");
    qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
                       qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
                   irq[UART16550_IRQ], 115200, serial_hds[0],
                   DEVICE_LITTLE_ENDIAN);

    /* 2 timers at irq 2 @ 100 Mhz.  */
    dev = qdev_create(NULL, "xlnx.xps-timer");
    qdev_prop_set_uint32(dev, "one-timer-only", 0);
    qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);

    /* axi ethernet and dma initialization. */
    qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
    eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
    dma = qdev_create(NULL, "xlnx.axi-dma");

    /* FIXME: attach to the sysbus instead */
    object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
                              NULL);
    object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
                              NULL);

    ds = object_property_get_link(OBJECT(dma),
                                  "axistream-connected-target", NULL);
    cs = object_property_get_link(OBJECT(dma),
                                  "axistream-control-connected-target", NULL);
    qdev_set_nic_properties(eth0, &nd_table[0]);
    qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
    qdev_prop_set_uint32(eth0, "txmem", 0x1000);
    object_property_set_link(OBJECT(eth0), OBJECT(ds),
                             "axistream-connected", &error_abort);
    object_property_set_link(OBJECT(eth0), OBJECT(cs),
                             "axistream-control-connected", &error_abort);
    qdev_init_nofail(eth0);
    sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);

    ds = object_property_get_link(OBJECT(eth0),
                                  "axistream-connected-target", NULL);
    cs = object_property_get_link(OBJECT(eth0),
                                  "axistream-control-connected-target", NULL);
//.........这里部分代码省略.........

开发者ID:01org，项目名称:qemu-lite，代码行数:101，代码来源:petalogix_ml605_mmu.c

示例18: reptar_init

static void reptar_init(MachineState *machine)
{
    MemoryRegion *sysmem = get_system_memory();
    struct reptar_s *s = (struct reptar_s *)g_malloc0(sizeof(*s));
    DriveInfo *dmtd = NULL, *dsd = NULL, *pflash = NULL;
    const char *kernel_filename = machine->kernel_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    const char *initrd_filename = machine->initrd_filename;

    /* (DRE) */
    uint32_t pflash_size = 16 << 10; /* 16 KB */

    if (ram_size > 1024 * 1024 * 1024) {
        fprintf(stderr, "reptar: maximum permitted RAM size 1024MB\n");
        exit(1);
    }

    /* Check if we are in -kernel u-boot.bin mode */
    if (kernel_filename) {
        /* (DRE) We do the following in order to retrieve the kernel filename during the boot process.
         * For example, if qemu was launched with -kernel u-boot.bin */
        reptar_binfo.ram_size = ram_size;
        reptar_binfo.kernel_filename = kernel_filename;
        reptar_binfo.kernel_cmdline = kernel_cmdline;
        reptar_binfo.initrd_filename = initrd_filename;
        reptar_binfo.loader_start = 0x40014100; /* Start of small bootloader*/
        reptar_binfo.board_id = 0;
    } else
        reptar_binfo.kernel_filename = NULL;

    s->cpu = omap3_mpu_init(sysmem, omap3430, ram_size, NULL, NULL, serial_hds[0], NULL);

    pflash = drive_get(IF_PFLASH, 0, 0);
    if (pflash) {
        if (!pflash_cfi02_register(0x30000000,
                                   NULL,
                                   "reptar.nand_flash",
                                   pflash_size,
                                   blk_by_legacy_dinfo(pflash),
                                   sector_len,
                                   pflash_size / sector_len,
                                   1, 2, 0, 0, 0, 0, 0x555, 0x2AA, 0)) {
            fprintf(stderr, "qemu: Error registering flash memory.\n");
            exit(1);
        }
    }
    else {

        dmtd = drive_get(IF_MTD, 0, 0);

        s->nand = nand_init(dmtd ? blk_by_legacy_dinfo(dmtd) : NULL, NAND_MFR_MICRON, 0xba);

        nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
        omap_gpmc_attach_nand(s->cpu->gpmc, REPTAR_NAND_CS, s->nand);

    }

    /*
     * (DRE) Define MMC if any
     */
    dsd  = drive_get(IF_SD, 0, 0);
    if (dsd)
        omap3_mmc_attach(s->cpu->omap3_mmc[0], blk_by_legacy_dinfo(dsd), 0, 0);


    if (!pflash && !dmtd && !dsd)
        hw_error("%s: SD or NAND image required", __FUNCTION__);

    /* FAB revs >= 2516: 4030 interrupt is GPIO 0 (earlier ones were 112) */
    s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c[0]),
                              qdev_get_gpio_in(s->cpu->gpio, 0),
                              NULL,
                              NULL);

    /* Wire up an I2C slave which returns EDID monitor information;
     * newer Linux kernels won't turn on the display unless they
     * detect a monitor over DDC.
     */
    s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c[2]), "i2c-ddc", 0x50);

    omap_lcd_panel_attach(s->cpu->dss);

    /* Strictly this should be a LAN9221 */
#if 0
    if (nd_table[0].vlan) {
#endif /* 0 */
        /* The ethernet chip hangs off the GPMC */
        NICInfo *nd = &nd_table[0];
        qemu_check_nic_model(nd, "lan9118");
        s->eth = qdev_create(NULL, "lan9118");
        qdev_set_nic_properties(s->eth, nd);
        qdev_init_nofail(s->eth);
        omap_gpmc_attach(s->cpu->gpmc, REPTAR_NET_CS,
                         sysbus_mmio_get_region(SYS_BUS_DEVICE(s->eth), 0));
        sysbus_connect_irq(SYS_BUS_DEVICE(s->eth), 0, qdev_get_gpio_in(s->cpu->gpio, 29));
#if 0
    }
#endif /* 0 */

    // Create reptar_sp6 with it's base address
//.........这里部分代码省略.........

开发者ID:wheelin，项目名称:seee_labs，代码行数:101，代码来源:reptar.c

示例19: mips_jazz_init


//.........这里部分代码省略.........
        dev = qdev_create(NULL, "sysbus-g364");
        qdev_init_nofail(dev);
        sysbus = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(sysbus, 0, 0x60080000);
        sysbus_mmio_map(sysbus, 1, 0x40000000);
        sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 3));
        {
            /* Simple ROM, so user doesn't have to provide one */
            MemoryRegion *rom_mr = g_new(MemoryRegion, 1);
            memory_region_init_ram(rom_mr, NULL, "g364fb.rom", 0x80000,
                                   &error_fatal);
            memory_region_set_readonly(rom_mr, true);
            uint8_t *rom = memory_region_get_ram_ptr(rom_mr);
            memory_region_add_subregion(address_space, 0x60000000, rom_mr);
            rom[0] = 0x10; /* Mips G364 */
        }
        break;
    case JAZZ_PICA61:
        isa_vga_mm_init(0x40000000, 0x60000000, 0, get_system_memory());
        break;
    default:
        break;
    }

    /* Network controller */
    for (n = 0; n < nb_nics; n++) {
        nd = &nd_table[n];
        if (!nd->model)
            nd->model = g_strdup("dp83932");
        if (strcmp(nd->model, "dp83932") == 0) {
            qemu_check_nic_model(nd, "dp83932");

            dev = qdev_create(NULL, "dp8393x");
            qdev_set_nic_properties(dev, nd);
            qdev_prop_set_uint8(dev, "it_shift", 2);
            qdev_prop_set_ptr(dev, "dma_mr", rc4030_dma_mr);
            qdev_init_nofail(dev);
            sysbus = SYS_BUS_DEVICE(dev);
            sysbus_mmio_map(sysbus, 0, 0x80001000);
            sysbus_mmio_map(sysbus, 1, 0x8000b000);
            sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
            break;
        } else if (is_help_option(nd->model)) {
            fprintf(stderr, "qemu: Supported NICs: dp83932\n");
            exit(1);
        } else {
            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
            exit(1);
        }
    }

    /* SCSI adapter */
    esp_init(0x80002000, 0,
             rc4030_dma_read, rc4030_dma_write, dmas[0],
             qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);

    /* Floppy */
    for (n = 0; n < MAX_FD; n++) {
        fds[n] = drive_get(IF_FLOPPY, 0, n);
    }
    /* FIXME: we should enable DMA with a custom IsaDma device */
    fdctrl_init_sysbus(qdev_get_gpio_in(rc4030, 1), -1, 0x80003000, fds);

    /* Real time clock */
    rtc_init(isa_bus, 1980, NULL);
    memory_region_init_io(rtc, NULL, &rtc_ops, NULL, "rtc", 0x1000);

开发者ID:E8-Storage，项目名称:qemu，代码行数:67，代码来源:mips_jazz.c

示例20: petalogix_s3adsp1800_init

static void
petalogix_s3adsp1800_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    DeviceState *dev;
    MicroBlazeCPU *cpu;
    DriveInfo *dinfo;
    int i;
    hwaddr ddr_base = MEMORY_BASEADDR;
    MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32];
    MemoryRegion *sysmem = get_system_memory();

    cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
    object_property_set_str(OBJECT(cpu), "7.10.d", "version", &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);

    /* Attach emulated BRAM through the LMB.  */
    memory_region_init_ram(phys_lmb_bram, NULL,
                           "petalogix_s3adsp1800.lmb_bram", LMB_BRAM_SIZE,
                           &error_fatal);
    memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram);

    memory_region_init_ram(phys_ram, NULL, "petalogix_s3adsp1800.ram",
                           ram_size, &error_fatal);
    memory_region_add_subregion(sysmem, ddr_base, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    pflash_cfi01_register(FLASH_BASEADDR,
                          NULL, "petalogix_s3adsp1800.flash", FLASH_SIZE,
                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
                          64 * KiB, FLASH_SIZE >> 16,
                          1, 0x89, 0x18, 0x0000, 0x0, 1);

    dev = qdev_create(NULL, "xlnx.xps-intc");
    qdev_prop_set_uint32(dev, "kind-of-intr",
                         1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
                       qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    xilinx_uartlite_create(UARTLITE_BASEADDR, irq[UARTLITE_IRQ],
                           serial_hd(0));

    /* 2 timers at irq 2 @ 62 Mhz.  */
    dev = qdev_create(NULL, "xlnx.xps-timer");
    qdev_prop_set_uint32(dev, "one-timer-only", 0);
    qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);

    qemu_check_nic_model(&nd_table[0], "xlnx.xps-ethernetlite");
    dev = qdev_create(NULL, "xlnx.xps-ethernetlite");
    qdev_set_nic_properties(dev, &nd_table[0]);
    qdev_prop_set_uint32(dev, "tx-ping-pong", 0);
    qdev_prop_set_uint32(dev, "rx-ping-pong", 0);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]);

    create_unimplemented_device("gpio", GPIO_BASEADDR, 0x10000);

    microblaze_load_kernel(cpu, ddr_base, ram_size,
                           machine->initrd_filename,
                           BINARY_DEVICE_TREE_FILE,
                           NULL);
}

开发者ID:cminyard，项目名称:qemu，代码行数:73，代码来源:petalogix_s3adsp1800_mmu.c

注：本文中的qdev_set_nic_properties函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ qdev_set_parent_bus函数代码示例发布时间：2022-05-30

C++ qdev_prop_set_after_realize函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19193|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8327|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ qdev_set_nic_properties函数代码示例

示例1: beagle_common_init

示例2: lx60_net_init

示例3: lx60_net_init

示例4: overo_init

示例5: spapr_vlan_create

示例6: gem_init

示例7: smc91c111_init

示例8: mipsnet_init

示例9: lan9215_init

示例10: qemu_check_nic_model

示例11: openrisc_sim_net_init

示例12: openrisc_sim_net_init

示例13: lance_init

示例14: qdev_create

示例15: s390_create_virtio_net

示例16: calxeda_init

示例17: petalogix_ml605_init

示例18: reptar_init

示例19: mips_jazz_init

示例20: petalogix_s3adsp1800_init

请发表评论

全部评论

上一篇：

下一篇：

小程序弹窗禁止页面滚动

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

年的笔顺,概述年的笔画,分析年的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053