C++ q1函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中q1函数的典型用法代码示例。如果您正苦于以下问题：C++ q1函数的具体用法？C++ q1怎么用？C++ q1使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了q1函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: if

QLineF Util::rectSlice(QPointF p1, QPointF p2, QRectF r)
{
    // https://gist.github.com/ChickenProp/3194723
    qreal minX = r.x();
    qreal minY = r.y();
    qreal maxX = minX + r.width();
    qreal maxY = minY + r.height();

    qreal dx = p2.x() - p1.x();
    qreal dy = p2.y() - p1.y();

    qreal v[4] = { -dx, dx, -dy, dy };
    qreal u[4] = { p1.x() - minX, maxX - p1.x(), p1.y() - minY, maxY - p1.y() };
    qreal t[4];


    qreal tMax = Inf, tMin = -Inf;
    for (int i=0; i<4; ++i) {
        if (v[i] != 0) {
            t[i] = u[i]/v[i];
            if (v[i] < 0 && tMin < t[i])
                tMin = t[i];
            if (v[i] > 0 && tMax > t[i])
                tMax = t[i];

        } else if (u[i] >= 0) {
            return QLineF(p1, p2); // Inside rect
        } else {
            return QLineF(); // Outside rect
        }
    }

    if (tMin >= tMax)
        return QLineF();

    if (tMax > 1) tMax = 1;
    if (tMax < 0) tMax = 0;
    if (tMin > 1) tMin = 1;
    if (tMin < 0) tMin = 0;

    QPointF q1(p1.x() + tMin*dx, p1.y() + tMin*dy);
    QPointF q2(p1.x() + tMax*dx, p1.y() + tMax*dy);

    return QLineF(q1, q2);
}

开发者ID:pjmahoney，项目名称:nutmeg，代码行数:45，代码来源:util.cpp

示例2: q0

void dSceneRender::DrawCylinder(int segments, dFloat radius, dFloat heigh)
{
	dVector q0 ( heigh / 2.0f, radius, 0.0f, 0.0f);
	dVector q1 (-heigh / 2.0f, radius, 0.0f, 0.0f);
	dMatrix rotation (dPitchMatrix(2.0f * 3.1614f/segments));
	dVector cap0[1024];
	dVector cap1[1024];
	dAssert (segments < sizeof (cap0)/sizeof (cap0[0]));
	cap0[segments] = q0;
	cap1[segments] = q1;
	for (int i = 0; i < segments; i ++) {
		cap0[i] = q0;
		cap1[i] = q1;
		q0 = rotation.RotateVector(q0);
		q1 = rotation.RotateVector(q1);
	}
	dVector normal0 ( 1.0f, 0.0f, 0.0f, 0.0f);
	dVector normal1 (-1.0f, 0.0f, 0.0f, 0.0f);

	BeginTriangle();	
	for (int i = 2; i < segments; i ++) {
		SubmitNormal(normal0);
		DrawTriangle(cap0[0], cap0[i-1], cap0[i]);

		SubmitNormal(normal1);
		DrawTriangle(cap1[0], cap1[i], cap1[i - 1]);
	}

	for (int i = 0; i < segments; i ++) {
		dVector p0 (cap0[i]);
		dVector p1 (cap0[i + 1]);
		dVector p2 (cap1[i + 1]);
		dVector p3 (cap1[i]);

		dVector normal ((p1 - p0) * (p2 - p0));
		normal = normal.Scale (1.0f / dSqrt(normal % normal));

		SubmitNormal(normal);
		DrawTriangle(p0, p2, p1);

		SubmitNormal(normal);
		DrawTriangle(p0, p3, p2);
	}
	End();	
}

开发者ID:Hurleyworks，项目名称:MiniNewton，代码行数:45，代码来源:dSceneRender.cpp

示例3: TestJoinNode

void
TestJoinNode() {
    tbb::flow::graph g;

    TestSimpleSuccessorArc<tbb::flow::queueing>("queueing");
    TestSimpleSuccessorArc<tbb::flow::reserving>("reserving");
    TestSimpleSuccessorArc<tbb::flow::tag_matching>("tag_matching");

    // queueing and tagging join nodes have input queues, so the input ports do not reverse.
    REMARK(" reserving preds");
    {
        tbb::flow::join_node<tbb::flow::tuple<int,int>, tbb::flow::reserving> rj(g);
        tbb::flow::queue_node<int> q0(g);
        tbb::flow::queue_node<int> q1(g);
        tbb::flow::make_edge(q0,tbb::flow::input_port<0>(rj));
        tbb::flow::make_edge(q1,tbb::flow::input_port<1>(rj));
        q0.try_put(1);
        g.wait_for_all();  // quiesce
        ASSERT(!(tbb::flow::input_port<0>(rj).my_predecessors.empty()),"reversed port missing predecessor");
        ASSERT((tbb::flow::input_port<1>(rj).my_predecessors.empty()),"non-reversed port has pred");
        g.reset();
        ASSERT((tbb::flow::input_port<0>(rj).my_predecessors.empty()),"reversed port has pred after reset()");
        ASSERT((tbb::flow::input_port<1>(rj).my_predecessors.empty()),"non-reversed port has pred after reset()");
        q1.try_put(2);
        g.wait_for_all();  // quiesce
        ASSERT(!(tbb::flow::input_port<1>(rj).my_predecessors.empty()),"reversed port missing predecessor");
        ASSERT((tbb::flow::input_port<0>(rj).my_predecessors.empty()),"non-reversed port has pred");
        g.reset();
        ASSERT((tbb::flow::input_port<1>(rj).my_predecessors.empty()),"reversed port has pred after reset()");
        ASSERT((tbb::flow::input_port<0>(rj).my_predecessors.empty()),"non-reversed port has pred after reset()");
#if TBB_PREVIEW_FLOW_GRAPH_FEATURES
        // should reset predecessors just as regular reset.
        q1.try_put(3);
        g.wait_for_all();  // quiesce
        ASSERT(!(tbb::flow::input_port<1>(rj).my_predecessors.empty()),"reversed port missing predecessor");
        ASSERT((tbb::flow::input_port<0>(rj).my_predecessors.empty()),"non-reversed port has pred");
        g.reset(tbb::flow::rf_extract);
        ASSERT((tbb::flow::input_port<1>(rj).my_predecessors.empty()),"reversed port has pred after reset()");
        ASSERT((tbb::flow::input_port<0>(rj).my_predecessors.empty()),"non-reversed port has pred after reset()");
        ASSERT(q0.my_successors.empty(), "edge not removed by reset(rf_extract)");
        ASSERT(q1.my_successors.empty(), "edge not removed by reset(rf_extract)");
#endif
    }
    REMARK(" done\n");
}

开发者ID:CCJY，项目名称:lockfree-bench，代码行数:45，代码来源:test_flow_graph_whitebox.cpp

示例4: q0

cv::Mat sg::padKernelFFT( cv::Mat const & input, cv::Size const & paddedSize )
{
  cv::Mat result = cv::Mat::zeros( paddedSize, input.type() );

  // Get the 4 quadrants of the input kernel
  int hwx = input.cols / 2;
  int hwy = input.rows / 2;
  int px = hwx;
  int py = hwy;

  int fftW = paddedSize.width;
  int fftH = paddedSize.height;

  if( input.cols %2 != 0 )
    ++px;

  if( input.rows % 2 != 0 )
    ++py;

  cv::Mat  q0( input, cv::Rect( 0, 0, px, py ) );
  cv::Mat q02( result, cv::Rect( fftW - px, fftH - py, px, py ) );

  cv::Mat  q1( input, cv::Rect( px, 0, hwx, py ) );
  cv::Mat q12( result, cv::Rect( 0, fftH - py, hwx, py ) );

  cv::Mat  q2( input, cv::Rect( 0, py, px, hwy ) );
  cv::Mat q22( result, cv::Rect( fftW - px, 0, px, hwy ) );

  cv::Mat  q3( input, cv::Rect( px, py, hwx, hwy ) );
  cv::Mat q32( result, cv::Rect( 0, 0, hwx, hwy ) );

  q0.copyTo( q02 );
  q1.copyTo( q12 );
  q2.copyTo( q22 );
  q3.copyTo( q32 );

  // if our filter doesn't have real and complex components, make the complex part zeros
  if( result.channels() < 2 )
  {
    cv::Mat planes[] = { result, cv::Mat::zeros( result.size(), CV_32F ) };
    cv::merge( planes, 2, result );
  }

  return result;
}

开发者ID:UCSD-AUVSI，项目名称:SalientGreenGPU-Deprecated，代码行数:45，代码来源:Utility.cpp

示例5: getOptimalDFTSize

Mat THDUtil::computeOrientation(Mat frame)
{
	Mat padded; //expanding input image to optimal size by making boarder
	int m = getOptimalDFTSize(frame.rows);
	int n = getOptimalDFTSize(frame.cols);
	copyMakeBorder(frame, padded, m - frame.rows, 0, n - frame.cols, BORDER_CONSTANT, 0);

	Mat planes[] = { Mat_<float>(padded), Mat::zeros(padded.size(), CV_32F) };
	Mat complexI;
	merge(planes, 2, complexI);

	dft(complexI, complexI);

	split(complexI, planes);                   // planes[0] = Re(DFT(I), planes[1] = Im(DFT(I))
	magnitude(planes[0], planes[1], planes[0]);// planes[0] = magnitude
	Mat magI = planes[0];

	magI += Scalar::all(1);                    // switch to logarithmic scale
	log(magI, magI);

	// crop the spectrum, if it has an odd number of rows or columns
	magI = magI(Rect(0, 0, magI.cols & -2, magI.rows & -2));

	// rearrange the quadrants of Fourier image  so that the origin is at the image center
	int cx = magI.cols / 2;
	int cy = magI.rows / 2;

	Mat q0(magI, Rect(0, 0, cx, cy));   // Top-Left - Create a ROI per quadrant
	Mat q1(magI, Rect(cx, 0, cx, cy));  // Top-Right
	Mat q2(magI, Rect(0, cy, cx, cy));  // Bottom-Left
	Mat q3(magI, Rect(cx, cy, cx, cy)); // Bottom-Right

	Mat tmp;                           // swap quadrants (Top-Left with Bottom-Right)
	q0.copyTo(tmp);
	q3.copyTo(q0);
	tmp.copyTo(q3);

	q1.copyTo(tmp);                    // swap quadrant (Top-Right with Bottom-Left)
	q2.copyTo(q1);
	tmp.copyTo(q2);

	normalize(magI, magI, 0, 1, CV_MINMAX); // Transform the matrix with float values into a
	// viewable image form (float between values 0 and 1).
	return magI;
}

开发者ID:billzhou123，项目名称:TrafficHazardDetection，代码行数:45，代码来源:THDUtil.cpp

示例6: RemoveAttribute

void Database::_RemoveAlbum(QString album, int artist)
{
    if(!artist)
        RemoveAttribute(nAlbum, album);
    else {
        if(!open) return;
        int id = _AddAlbum(album, artist);
        if(id > 0) {
            QSqlQuery q("", db);
            q.prepare("select File from Song where Album = "+QString::number(id));
            q.exec();
            while(q.next()) {
                _RemoveFile(q.value(0).toString());
            }
            QSqlQuery q1("delete from Album where ID = "+QString::number(id), db);
        }
    }
}

开发者ID:sushantg11，项目名称:cuberok，代码行数:18，代码来源:database.cpp

示例7: PlaneMeshCollisionRayHitCallback

	static dFloat PlaneMeshCollisionRayHitCallback (NewtonUserMeshCollisionRayHitDesc* const rayDesc)
	{
		dVector q0 (rayDesc->m_p0[0], rayDesc->m_p0[1], rayDesc->m_p0[2]);
		dVector q1 (rayDesc->m_p1[0], rayDesc->m_p1[1], rayDesc->m_p1[2]);
		dVector dq (q1 - q0);

		// calculate intersection between point lien a plane and return intersection parameter
		dInfinitePlane* const me = (dInfinitePlane*) rayDesc->m_userData;
		dFloat t = -(me->m_plane.DotProduct3(q0) + me->m_plane.m_w) / (me->m_plane.DotProduct3(dq));
		if ((t > 0.0f) && (t < 1.0f)) {
			rayDesc->m_normalOut[0] = me->m_plane[0];
			rayDesc->m_normalOut[1] = me->m_plane[1];
			rayDesc->m_normalOut[2] = me->m_plane[2];
		} else {
			t = 1.2f;
		}
		return t;
	}

开发者ID:LaKraven，项目名称:newton-dynamics，代码行数:18，代码来源:UserPlaneCollision.cpp

示例8: QFETCH

void tst_QQuaternion::dotProduct()
{
    QFETCH(float, x1);
    QFETCH(float, y1);
    QFETCH(float, z1);
    QFETCH(float, scalar1);
    QFETCH(float, x2);
    QFETCH(float, y2);
    QFETCH(float, z2);
    QFETCH(float, scalar2);
    QFETCH(float, dot);

    QQuaternion q1(scalar1, x1, y1, z1);
    QQuaternion q2(scalar2, x2, y2, z2);

    QCOMPARE(QQuaternion::dotProduct(q1, q2), dot);
    QCOMPARE(QQuaternion::dotProduct(q2, q1), dot);
}

开发者ID:2gis，项目名称:2gisqt5android，代码行数:18，代码来源:tst_qquaternion.cpp

示例9: rotate_FromCenter

void    rotate_FromCenter(Mat &magI) {
    int cx = magI.cols/2;
    int cy = magI.rows/2;

    Mat q0(magI, Rect(0, 0, cx, cy));   // Top-Left - Create a ROI per quadrant
    Mat q1(magI, Rect(cx, 0, cx, cy));  // Top-Right
    Mat q2(magI, Rect(0, cy, cx, cy));  // Bottom-Left
    Mat q3(magI, Rect(cx, cy, cx, cy)); // Bottom-Right

    Mat tmp;                           // swap quadrants (Top-Left with Bottom-Right)
    q0.copyTo(tmp);
    q3.copyTo(q0);
    tmp.copyTo(q3);

    q1.copyTo(tmp);                    // swap quadrant (Top-Right with Bottom-Left)
    q2.copyTo(q1);
    tmp.copyTo(q2);
}

开发者ID:hungnguyen0606，项目名称:ImageProcessing，代码行数:18，代码来源:processFrq.cpp

示例10: QFETCH

void tst_QQuaternion::multiply()
{
    QFETCH(qreal, x1);
    QFETCH(qreal, y1);
    QFETCH(qreal, z1);
    QFETCH(qreal, w1);
    QFETCH(qreal, x2);
    QFETCH(qreal, y2);
    QFETCH(qreal, z2);
    QFETCH(qreal, w2);

    QQuaternion q1(w1, x1, y1, z1);
    QQuaternion q2(w2, x2, y2, z2);

    QBENCHMARK {
        QQuaternion q3 = q1 * q2;
    }
}

开发者ID:Akheon23，项目名称:chromecast-mirrored-source.vendor，代码行数:18，代码来源:tst_qquaternion.cpp

示例11: CreateCylinder

int CreateCylinder (dVector* const points, dVector* const normals, int segments, dFloat radius, dFloat height, int maxPoints)
{
	dMatrix rotation (dPitchMatrix((-360.0f / segments) * 3.141592f/180.0f));
	dVector p0 (0.0, 0.0f, 0.0f, 0.0f);
	dVector p1 (0.0, radius, 0.0f, 0.0f);

	dVector q0 (height, 0.0f, 0.0f, 0.0f);
	dVector q1 (height, radius, 0.0f, 0.0f);
	dVector n (0, 1.0f, 0.0f, 0.0f);

	int count = 0;
	for (int i = 0; (i < segments) && (count < maxPoints); i ++) {
		dVector p2 (rotation.RotateVector(p1));
		normals[count] = dVector (-1.0f, 0.0f, 0.0f, 0.0f);
		points[count * 3 + 0] = p0;
		points[count * 3 + 1] = p1;
		points[count * 3 + 2] = p2;
		count ++;

		dVector q2 (rotation.RotateVector(q1));
		normals[count] = dVector (1.0f, 0.0f, 0.0f, 0.0f);
		points[count * 3 + 0] = q0;
		points[count * 3 + 1] = q2;
		points[count * 3 + 2] = q1;
		count ++;

		normals[count] = n;
		points[count * 3 + 0] = p1;
		points[count * 3 + 1] = q1;
		points[count * 3 + 2] = p2;
		count ++;

		normals[count] = n;
		points[count * 3 + 0] = p2;
		points[count * 3 + 1] = q1;
		points[count * 3 + 2] = q2;
		count ++;

		n = rotation.RotateVector(n);
		p1 = p2;
		q1 = q2;
	}
	return count;
}

开发者ID:LaKraven，项目名称:newton-dynamics，代码行数:44，代码来源:dDrawUtils.cpp

示例12: reswap4p

	/*四角校正，opencv的fft输出的结果在四个角上，应当稍加处理。（swap）*/
	void reswap4p(Mat &src)
	{
		int cx = src.cols / 2;
		int cy = src.rows / 2;

		Mat q0(src, Rect(0, 0, cx, cy));   // Top-Left - Create a ROI per quadrant 
		Mat q1(src, Rect(cx, 0, cx, cy));  // Top-Right
		Mat q2(src, Rect(0, cy, cx, cy));  // Bottom-Left
		Mat q3(src, Rect(cx, cy, cx, cy)); // Bottom-Right

		Mat tmp;                           // swap quadrants (Top-Left with Bottom-Right)
		q0.copyTo(tmp);
		q3.copyTo(q0);
		tmp.copyTo(q3);

		q1.copyTo(tmp);                    // swap quadrant (Top-Right with Bottom-Left)
		q2.copyTo(q1);
		tmp.copyTo(q2);
	}

开发者ID:zhu-ty，项目名称:SKFDF，代码行数:20，代码来源:main.cpp

示例13: q1

void q1(char palavra[], int cont)
{
    if(palavra[cont] == '\0')
    {
        qf(palavra, cont);
    }
    else if(palavra[cont] == '1')
    {
        q1(palavra, cont+1);
    }
    else if(palavra[cont] == '2')
    {
        qf(palavra, cont+1);
    }
    else
    {
        erro();
    }
}

开发者ID:eltonfonseca，项目名称:Scripts-em-C，代码行数:19，代码来源:AFND.c

示例14: rearrange

void rearrange(cv::Mat &img)
{
    // img = img(cv::Rect(0, 0, img.cols & -2, img.rows & -2));
    int cx = img.cols / 2;
    int cy = img.rows / 2;

    cv::Mat q0(img, cv::Rect(0, 0, cx, cy)); // Top-Left - Create a ROI per quadrant
    cv::Mat q1(img, cv::Rect(cx, 0, cx, cy)); // Top-Right
    cv::Mat q2(img, cv::Rect(0, cy, cx, cy)); // Bottom-Left
    cv::Mat q3(img, cv::Rect(cx, cy, cx, cy)); // Bottom-Right

    cv::Mat tmp; // swap quadrants (Top-Left with Bottom-Right)
    q0.copyTo(tmp);
    q3.copyTo(q0);
    tmp.copyTo(q3);
    q1.copyTo(tmp); // swap quadrant (Top-Right with Bottom-Left)
    q2.copyTo(q1);
    tmp.copyTo(q2);
}

开发者ID:39M，项目名称:Matrice100，代码行数:19，代码来源:ffttools.hpp

示例15: CalculateGlobalMatrix

void CustomHinge::SubmitConstrainst ()
{
	dFloat angle;
	dFloat sinAngle;
	dFloat cosAngle;
	dMatrix matrix0;
	dMatrix matrix1;

	// calculate the position of the pivot point and the jacobian direction vectors, in global space. 
	CalculateGlobalMatrix (m_localMatrix0, m_localMatrix1, matrix0, matrix1);

	// Restrict the movemenet on the pivot point along all tree orthonormal direction
	NewtonUserJointAddLinearRow (m_joint, &matrix0.m_posit[0], &matrix1.m_posit[0], &matrix0.m_front[0]);
	NewtonUserJointAddLinearRow (m_joint, &matrix0.m_posit[0], &matrix1.m_posit[0], &matrix0.m_up[0]);
	NewtonUserJointAddLinearRow (m_joint, &matrix0.m_posit[0], &matrix1.m_posit[0], &matrix0.m_right[0]);
	
	// get a point along the pin axis at some resonable large distance from the pivot
	dVector q0 (matrix0.m_posit + matrix0.m_front.Scale(MIN_JOINT_PIN_LENGTH));
	dVector q1 (matrix1.m_posit + matrix1.m_front.Scale(MIN_JOINT_PIN_LENGTH));

	// two contraints row perpendicular to the pin vector
 	NewtonUserJointAddLinearRow (m_joint, &q0[0], &q1[0], &matrix0.m_up[0]);
	NewtonUserJointAddLinearRow (m_joint, &q0[0], &q1[0], &matrix0.m_right[0]);

	// if limit are enable ...
	if (m_limitsOn) {
		// the joint angle can be determine by getting the angle between any two non parallel vectors
		sinAngle = (matrix0.m_up * matrix1.m_up) % matrix0.m_front;
		cosAngle = matrix0.m_up % matrix1.m_up;
		angle = atan2f (sinAngle, cosAngle);

		if (angle < m_minAngle) {
			// get a point along the up vector and set a constraint  
			NewtonUserJointAddAngularRow (m_joint, 0.0f, &matrix0.m_front[0]);
			NewtonUserJointSetRowMaximunFriction (m_joint, 0.0f);
			
		} else if (angle > m_maxAngle) {
			NewtonUserJointAddAngularRow (m_joint, 0.0f, &matrix0.m_front[0]);
			NewtonUserJointSetRowMinimunFriction (m_joint, 0.0f);
		}
	}
 }

开发者ID:brettminnie，项目名称:BDBGame，代码行数:42，代码来源:CustomHinge.cpp

示例16: rsa_pub

rsa_priv::rsa_priv (const bigint &n1, const bigint &n2)
  : rsa_pub (n1 * n2), p (n1), q (n2)
{
  bigint p1 (n1-1);
  bigint q1 (n2-1);
  phin = p1 * q1;
  d = mod (invert (e, phin), phin);

  /* Precompute for CRT */
  dp = mod (d, p1);
  dq = mod (d, q1);
  pinvq = mod (invert (p, q), q);

  // warn << "p " << p.getstr () << "\n";
  // warn << "q " << q.getstr () << "\n";
  // warn << "e " << e.getstr << "\n";
  // warn << "d " << d.getstr << "\n";

  init ();
}

开发者ID:Sidnicious，项目名称:sfslite，代码行数:20，代码来源:rsa.C

示例17: DftShift

cv::Mat DftShift(const cv::Mat spectrum) {
  cv::Mat shifted_spectrum = spectrum.clone();

  int cr = shifted_spectrum.rows / 2;
  int cc = shifted_spectrum.cols / 2;

  cv::Mat q0(shifted_spectrum, cv::Rect(0, 0, cc, cr));
  cv::Mat q1(shifted_spectrum, cv::Rect(cc, 0, cc, cr));
  cv::Mat q2(shifted_spectrum, cv::Rect(0, cr, cc, cr));
  cv::Mat q3(shifted_spectrum, cv::Rect(cc, cr, cc, cr));
  cv::Mat tmp;
  q0.copyTo(tmp);
  q3.copyTo(q0);
  tmp.copyTo(q3);
  q1.copyTo(tmp);
  q2.copyTo(q1);
  tmp.copyTo(q2);

  return shifted_spectrum;
}

开发者ID:csalvaggio，项目名称:imgs361，代码行数:20，代码来源:DftShift.cpp

示例18: rearrangeQuadrants

void rearrangeQuadrants(cv::Mat& image) {
    // rearrange the quadrants of Fourier image  so that the origin is at the image center
    int cx = image.cols / 2;
    int cy = image.rows / 2;

    cv::Mat q0(image, cv::Rect(0, 0, cx, cy)); // Top-Left - Create a ROI per quadrant
    cv::Mat q1(image, cv::Rect(cx, 0, cx, cy)); // Top-Right
    cv::Mat q2(image, cv::Rect(0, cy, cx, cy)); // Bottom-Left
    cv::Mat q3(image, cv::Rect(cx, cy, cx, cy)); // Bottom-Right

    cv::Mat tmp;
    q0.copyTo(tmp);
    q3.copyTo(q0);
    tmp.copyTo(q3);

    q1.copyTo(tmp); // swap quadrant (Top-Right with Bottom-Left)
    q2.copyTo(q1);
    tmp.copyTo(q2);

}

开发者ID:OsipovStas，项目名称:ImageAnalysis，代码行数:20，代码来源:main.cpp

示例19: main

int main ()
{
  printf ("Results of quat03_test:\n");
  
  quatf q1 (1.0f, 2.0f, 3.0f, 4.0f), q2 (5.0f, 6.0f, 7.0f, 8.0f);

  dump ("q1+q2", q1+q2);
  dump ("q1-q2", q1-q2);
  dump ("q1*q2", q1*q2);
  dump ("q1*2",  q1*2.0f);
  dump ("q1/2",  q1/2.0f);
  dump ("2*q1",  2.0f*q1);
  dump ("q1+=q2", quatf (q1)+=q2);
  dump ("q1-=q2", quatf (q1)-=q2);
  dump ("q1*=q2", quatf (q1)*=q2);
  dump ("q1*=2",  quatf (q1)*=2.0f);
  dump ("q1/=2",  quatf (q1)/=2.0f);

  return 0;
}

开发者ID:untgames，项目名称:funner，代码行数:20，代码来源:quat03.cpp

示例20: q2

void q2(const char *cad, int *p, int *c)
{
	if(cad[*p] == '\0')
		return;
	if(cad[*p] == '0')
	{
		(*p)++;
		q1(cad, p, c);
	}
	else if(cad[*p] == '1')
	{
		(*p)++;
		q3(cad, p, c);
	}
	else
	{
		fprintf(stderr, "Cadena no reconocida\n");
		exit(-2);
	}
}

开发者ID:carlostule，项目名称:ESCOM，代码行数:20，代码来源:ocho.c

注：本文中的q1函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ q2函数代码示例发布时间：2022-05-30

C++ q0函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19194|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8327|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9658|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ q1函数代码示例

示例1: if

示例2: q0

示例3: TestJoinNode

示例4: q0

示例5: getOptimalDFTSize

示例6: RemoveAttribute

示例7: PlaneMeshCollisionRayHitCallback

示例8: QFETCH

示例9: rotate_FromCenter

示例10: QFETCH

示例11: CreateCylinder

示例12: reswap4p

示例13: q1

示例14: rearrange

示例15: CalculateGlobalMatrix

示例16: rsa_pub

示例17: DftShift

示例18: rearrangeQuadrants

示例19: main

示例20: q2

请发表评论

全部评论

上一篇：

下一篇：

AnsiString在Delphi中虽然不可用，但是，在

krishnaik06/Machine-Learning-in-90-days

CVE-2022-31537

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053