C++ pxa_set_btuart_info函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pxa_set_btuart_info函数的典型用法代码示例。如果您正苦于以下问题：C++ pxa_set_btuart_info函数的具体用法？C++ pxa_set_btuart_info怎么用？C++ pxa_set_btuart_info使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pxa_set_btuart_info函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: lpd270_init

static void __init lpd270_init(void)
{
	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
	lpd270_flash_data[1].width = 4;

	/*
	 * System bus arbiter setting:
	 * - Core_Park
	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
	 */
	ARB_CNTRL = ARB_CORE_PARK | 0x234;

	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

	pxa_set_ac97_info(NULL);

	if (lpd270_lcd_to_use != NULL)
		pxa_set_fb_info(NULL, lpd270_lcd_to_use);

	pxa_set_ohci_info(&lpd270_ohci_platform_data);
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:27，代码来源:lpd270.c

示例2: common_init

static void __init common_init(void)
{
	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
	pm_power_off = spitz_poweroff;
	arm_pm_restart = spitz_restart;

	if (machine_is_spitz()) {
		sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
	} else if (machine_is_akita()) {
		sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
	} else if (machine_is_borzoi()) {
		sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
	}

	PMCR = 0x00;

	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
	PCFR |= PCFR_OPDE;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	spitz_init_spi();

	platform_add_devices(devices, ARRAY_SIZE(devices));
	pxa_set_mci_info(&spitz_mci_platform_data);
	pxa_set_ohci_info(&spitz_ohci_platform_data);
	pxa_set_ficp_info(&spitz_ficp_platform_data);
	set_pxa_fb_info(&spitz_pxafb_info);
	pxa_set_i2c_info(NULL);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:34，代码来源:spitz.c

示例3: imote2_init

static void __init imote2_init(void)
{
	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));

	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);

	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));

	i2c_register_board_info(0, imote2_i2c_board_info,
				ARRAY_SIZE(imote2_i2c_board_info));
	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
				ARRAY_SIZE(imote2_pwr_i2c_board_info));

	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
	pxa_set_i2c_info(&i2c_pdata);

	pxa_set_mci_info(&imote2_mci_platform_data);
	pxa_set_udc_info(&imote2_udc_info);
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:27，代码来源:imote2.c

示例4: a910_init

static void __init a910_init(void)
{
	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	pxa_set_i2c_info(NULL);
	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));

	pxa_set_fb_info(NULL, &ezx_fb_info_2);

	pxa_set_keypad_info(&a910_keypad_platform_data);

	if (a910_camera_init() == 0) {
		pxa_set_camera_info(&a910_pxacamera_platform_data);
		platform_device_register(&a910_camera);
	}

	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}

开发者ID:007kumarraja，项目名称:rockchip-rk3188-mk908，代码行数:25，代码来源:ezx.c

示例5: corgi_init

static void __init corgi_init(void)
{
	pm_power_off = corgi_poweroff;
	arm_pm_restart = corgi_restart;

	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
	PCFR |= PCFR_OPDE;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	corgi_init_spi();

 	pxa_set_udc_info(&udc_info);
	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
	pxa_set_mci_info(&corgi_mci_platform_data);
	pxa_set_ficp_info(&corgi_ficp_platform_data);
	pxa_set_i2c_info(NULL);
	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));

	platform_scoop_config = &corgi_pcmcia_config;

	if (machine_is_husky())
		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;

	platform_add_devices(devices, ARRAY_SIZE(devices));
}

开发者ID:1206697066，项目名称:kernel2.6.34，代码行数:30，代码来源:corgi.c

示例6: poodle_init

static void __init poodle_init(void)
{
	int ret = 0;

	pm_power_off = poodle_poweroff;

	PCFR |= PCFR_OPDE;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	platform_scoop_config = &poodle_pcmcia_config;

	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
	if (ret)
		pr_warning("poodle: Unable to register LoCoMo device\n");

	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
	pxa_set_udc_info(&udc_info);
	pxa_set_mci_info(&poodle_mci_platform_data);
	pxa_set_ficp_info(&poodle_ficp_platform_data);
	pxa_set_i2c_info(NULL);
	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
	poodle_init_spi();
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:28，代码来源:poodle.c

示例7: mioa701_machine_init

static void __init mioa701_machine_init(void)
{
	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
	RTTR = 32768 - 1; /* Reset crazy WinCE value */
	UP2OCR = UP2OCR_HXOE;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
	bootstrap_init();
	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
	pxa_set_mci_info(&mioa701_mci_info);
	pxa_set_keypad_info(&mioa701_keypad_info);
	pxa_set_udc_info(&mioa701_udc_info);
	pxa_set_ac97_info(&mioa701_ac97_info);
	pm_power_off = mioa701_poweroff;
	arm_pm_restart = mioa701_restart;
	platform_add_devices(devices, ARRAY_SIZE(devices));
	gsm_init();

	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
	pxa_set_i2c_info(&i2c_pdata);
	pxa27x_set_i2c_power_info(NULL);
	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
}

开发者ID:0709oNEY，项目名称:at100-kernel，代码行数:28，代码来源:mioa701.c

示例8: hx4700_init

static void __init hx4700_init(void)
{
	int ret;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
	if (ret)
		pr_err ("hx4700: Failed to request GPIOs.\n");

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	pxa_set_ficp_info(&ficp_info);
	pxa27x_set_i2c_power_info(NULL);
	pxa_set_i2c_info(NULL);
	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
	mdelay(10);
	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
	mdelay(10);
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:27，代码来源:hx4700.c

示例9: stargate2_init

static void __init stargate2_init(void)
{
    /* This is probably a board specific hack as this must be set
       prior to connecting the MFP stuff up. */
    MECR &= ~MECR_NOS;

    pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));

    pxa_set_ffuart_info(NULL);
    pxa_set_btuart_info(NULL);
    pxa_set_stuart_info(NULL);

    platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));

    pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
    pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
    pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
    spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));

    i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
    i2c_register_board_info(1,
                            ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
    pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
    pxa_set_i2c_info(&i2c_pdata);

    pxa_set_mci_info(&stargate2_mci_platform_data);

    pxa_set_udc_info(&stargate2_udc_info);

    stargate2_reset_bluetooth();
}

开发者ID:JamiLiang，项目名称:android_kernel_samsung_xcover，代码行数:31，代码来源:stargate2.c

示例10: spitz_init

static void __init spitz_init(void)
{
	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
	pm_power_off = spitz_poweroff;

	PMCR = 0x00;

	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
	PCFR |= PCFR_OPDE;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	spitz_spi_init();
	spitz_scoop_init();
	spitz_mkp_init();
	spitz_keys_init();
	spitz_leds_init();
	spitz_mmc_init();
	spitz_pcmcia_init();
	spitz_irda_init();
	spitz_uhc_init();
	spitz_lcd_init();
	spitz_nor_init();
	spitz_nand_init();
	spitz_i2c_init();
	spitz_audio_init();

	regulator_has_full_constraints();
}

开发者ID:Artox，项目名称:linux，代码行数:33，代码来源:spitz.c

示例11: zylonite_init

static void __init zylonite_init(void)
{
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	/* board-processor specific initialization */
	zylonite_pxa300_init();
	zylonite_pxa320_init();

	/*
	 * Note: We depend that the bootloader set
	 * the correct value to MSC register for SMC91x.
	 */
	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
	platform_device_register(&smc91x_device);

	pxa_set_ac97_info(NULL);
	zylonite_init_lcd();
	zylonite_init_mmc();
	zylonite_init_keypad();
	zylonite_init_nand();
	zylonite_init_leds();
	zylonite_init_ohci();
	zylonite_init_wm9713_audio();
}

开发者ID:01org，项目名称:KVMGT-kernel，代码行数:27，代码来源:zylonite.c

示例12: em_x270_init

static void __init em_x270_init(void)
{
	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

#ifdef CONFIG_PM
	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
#endif

	if (machine_is_em_x270())
		em_x270_module_init();
	else if (machine_is_exeda())
		em_x270_exeda_init();
	else
		panic("Unsupported machine: %d\n", machine_arch_type);

	em_x270_init_da9030();
	em_x270_init_dm9000();
	em_x270_init_rtc();
	em_x270_init_nand();
	em_x270_init_nor();
	em_x270_init_lcd();
	em_x270_init_mmc();
	em_x270_init_ohci();
	em_x270_init_keypad();
	em_x270_init_gpio_keys();
	em_x270_init_ac97();
	em_x270_init_spi();
	em_x270_init_i2c();
	em_x270_init_camera();
	em_x270_userspace_consumers_init();
}

开发者ID:Korn1699，项目名称:linux，代码行数:35，代码来源:em-x270.c

示例13: cm_x300_init

static void __init cm_x300_init(void)
{
	cm_x300_init_mfp();

	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	if (cpu_is_pxa300())
		pxa_set_ffuart_info(NULL);

	cm_x300_init_da9030();
	cm_x300_init_dm9000();
	cm_x300_init_lcd();
	cm_x300_init_u2d();
	cm_x300_init_ohci();
	cm_x300_init_mmc();
	cm_x300_init_nand();
	cm_x300_init_leds();
	cm_x300_init_i2c();
	cm_x300_init_spi();
	cm_x300_init_rtc();
	cm_x300_init_ac97();
	cm_x300_init_wi2wi();
	cm_x300_init_bl();

	regulator_has_full_constraints();
}

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:26，代码来源:cm-x300.c

示例14: hx4700_init

static void __init hx4700_init(void)
{
	int ret;

	PCFR = PCFR_GPR_EN | PCFR_OPDE;

	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
	if (ret)
		pr_err ("hx4700: Failed to request GPIOs.\n");

	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	platform_add_devices(devices, ARRAY_SIZE(devices));
	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));

	pxa_set_ficp_info(&ficp_info);
	pxa27x_set_i2c_power_info(NULL);
	pxa_set_i2c_info(NULL);
	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
	mdelay(10);
	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
	mdelay(10);

	regulator_has_full_constraints();
}

开发者ID:0x000000FF，项目名称:Linux4Edison，代码行数:34，代码来源:hx4700.c

示例15: himalaya_init

static void __init himalaya_init(void)
{
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	himalaya_lcd_init();
	platform_add_devices(devices, ARRAY_SIZE(devices));
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:8，代码来源:himalaya.c

示例16: mp900c_init

static void __init mp900c_init(void)
{
	printk(KERN_INFO "MobilePro 900/C machine init\n");
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	platform_add_devices(devices, ARRAY_SIZE(devices));
}

开发者ID:08opt，项目名称:linux，代码行数:8，代码来源:mp900.c

示例17: e350_init

static void __init e350_init(void)
{
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	eseries_register_clks();
	eseries_get_tmio_gpios();
	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
}

开发者ID:hw-claudio，项目名称:linux，代码行数:9，代码来源:eseries.c

示例18: e350_init

static void __init e350_init(void)
{
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	eseries_register_clks();
	eseries_get_tmio_gpios();
	platform_add_devices(devices, ARRAY_SIZE(devices));
	pxa_set_udc_info(&e7xx_udc_mach_info);
}

开发者ID:0-t，项目名称:samsung-kernel-msm7x30，代码行数:10，代码来源:e350.c

示例19: colibri_evalboard_init

void __init colibri_evalboard_init(void)
{
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);

	colibri_mmc_init();
	colibri_uhc_init();
	colibri_rtc_init();
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:10，代码来源:colibri-evalboard.c

示例20: h5000_init

static void __init h5000_init(void)
{
	fix_msc();

	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
	pxa_set_ffuart_info(NULL);
	pxa_set_btuart_info(NULL);
	pxa_set_stuart_info(NULL);
	pxa_set_udc_info(&h5000_udc_mach_info);
	platform_add_devices(ARRAY_AND_SIZE(devices));
}

开发者ID:08opt，项目名称:linux，代码行数:11，代码来源:h5000.c

注：本文中的pxa_set_btuart_info函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ pxa_set_cken函数代码示例发布时间：2022-05-30

C++ pxa_set_ac97_info函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19194|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8327|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ pxa_set_btuart_info函数代码示例

示例1: lpd270_init

示例2: common_init

示例3: imote2_init

示例4: a910_init

示例5: corgi_init

示例6: poodle_init

示例7: mioa701_machine_init

示例8: hx4700_init

示例9: stargate2_init

示例10: spitz_init

示例11: zylonite_init

示例12: em_x270_init

示例13: cm_x300_init

示例14: hx4700_init

示例15: himalaya_init

示例16: mp900c_init

示例17: e350_init

示例18: e350_init

示例19: colibri_evalboard_init

示例20: h5000_init

请发表评论

全部评论

上一篇：

下一篇：

Delphi简单方法搜索定位TreeView项

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053