本文整理汇总了C++中pxa2xx_set_spi_info函数的典型用法代码示例。如果您正苦于以下问题：C++ pxa2xx_set_spi_info函数的具体用法？C++ pxa2xx_set_spi_info怎么用？C++ pxa2xx_set_spi_info使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pxa2xx_set_spi_info函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: stargate2_init
static void __init stargate2_init(void)
{
/* This is probably a board specific hack as this must be set
prior to connecting the MFP stuff up. */
MECR &= ~MECR_NOS;
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
i2c_register_board_info(1,
ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
pxa_set_i2c_info(&i2c_pdata);
pxa_set_mci_info(&stargate2_mci_platform_data);
pxa_set_udc_info(&stargate2_udc_info);
stargate2_reset_bluetooth();
}
开发者ID:JamiLiang，项目名称:android_kernel_samsung_xcover，代码行数:31，代码来源:stargate2.c
示例2: imote2_init
static void __init imote2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
/* SPI chip select directions - all other directions should
* be handled by drivers.*/
gpio_direction_output(37, 0);
gpio_direction_output(24, 0);
gpio_direction_output(39, 0);
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
i2c_register_board_info(0, imote2_i2c_board_info,
ARRAY_SIZE(imote2_i2c_board_info));
i2c_register_board_info(1, imote2_pwr_i2c_board_info,
ARRAY_SIZE(imote2_pwr_i2c_board_info));
pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
pxa_set_i2c_info(&i2c_pdata);
pxa_set_mci_info(&imote2_mci_platform_data);
pxa_set_udc_info(&imote2_udc_info);
}
开发者ID:linuxkrishna，项目名称:4pamo，代码行数:29，代码来源:imote2.c
示例3: imote2_init
static void __init imote2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
i2c_register_board_info(0, imote2_i2c_board_info,
ARRAY_SIZE(imote2_i2c_board_info));
i2c_register_board_info(1, imote2_pwr_i2c_board_info,
ARRAY_SIZE(imote2_pwr_i2c_board_info));
pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
pxa_set_i2c_info(&i2c_pdata);
pxa_set_mci_info(&imote2_mci_platform_data);
pxa_set_udc_info(&imote2_udc_info);
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:27，代码来源:imote2.c
示例4: hx4700_init
static void __init hx4700_init(void)
{
int ret;
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
if (ret)
pr_err ("hx4700: Failed to request GPIOs.\n");
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
mdelay(10);
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
mdelay(10);
}
开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:27，代码来源:hx4700.c
示例5: hx4700_init
static void __init hx4700_init(void)
{
int ret;
PCFR = PCFR_GPR_EN | PCFR_OPDE;
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
if (ret)
pr_err ("hx4700: Failed to request GPIOs.\n");
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
mdelay(10);
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
mdelay(10);
regulator_has_full_constraints();
}
开发者ID:0x000000FF，项目名称:Linux4Edison，代码行数:34，代码来源:hx4700.c
示例6: tosa_init
static void __init tosa_init(void)
{
int dummy;
pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
PCFR |= PCFR_OPDE;
/* enable batt_fault */
PMCR = 0x01;
dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
开发者ID:NookieDevs，项目名称:Quickie，代码行数:35，代码来源:tosa.c
示例7: imote2_stargate2_init
static void __init imote2_stargate2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
pxa_set_i2c_info(&i2c_pdata);
}
开发者ID:Berrrry，项目名称:SPH-L710_NA_Kernel，代码行数:18，代码来源:stargate2.c
示例8: simcom_init
static void __init simcom_init(void)
{
/* Initialize NAND */
platform_device_register(&simcom_nand_device);
/* Initialize keypad interface */
pxa_set_keypad_info(&keybox5_keypad_platform_data);
/* Initialize DM9000 */
platform_device_register(&simcom_dm9000_device);
/* Initialize USB */
pxa_set_ohci_info(&simcom_ohci_platform_data);
/* Initialize SPI interfaces */
pxa2xx_set_spi_info(1, &simcom_spi_port1_info);
pxa2xx_set_spi_info(2, &simcom_spi_port2_info);
spi_register_board_info(ARRAY_AND_SIZE(simcom_spi_devices));
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(simcom_keybox5_i2c_info));
pxa2xx_mfp_config(ARRAY_AND_SIZE(simcom_pin_config));
}
开发者ID:Combitech，项目名称:simcom-linux-kernel，代码行数:20，代码来源:simcom_bb_keybox5.c
示例9: spitz_spi_init
static void __init spitz_spi_init(void)
{
struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
if (machine_is_akita()) {
lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
}
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
}
开发者ID:Artox，项目名称:linux，代码行数:12，代码来源:spitz.c
示例10: littleton_init_spi
static void __init littleton_init_spi(void)
{
int err;
err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
if (err) {
pr_warning("failed to request GPIO for LCS CS\n");
return;
}
gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
pxa2xx_set_spi_info(2, &littleton_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
}
开发者ID:10x-Amin，项目名称:nAa-kernel，代码行数:15，代码来源:littleton.c
示例11: simcom_init
static void __init simcom_init(void)
{
simcom_init_nand();
simcom_init_dm9000();
/* Initialize Display */
//platform_device_register(&simcom_backlight_device);
set_pxa_fb_info(simcom_display);
/* Initialize card interface */
pxa_set_mci_info(&simcom_mci_platform_data);
/* Initialize SPI interfaces */
pxa2xx_set_spi_info(1, &simcom_spi_port1_info);
spi_register_board_info(ARRAY_AND_SIZE(simcom_spi_devices));
pxa2xx_mfp_config(ARRAY_AND_SIZE(simcom_pin_config));
}
开发者ID:Combitech，项目名称:simcom-linux-kernel，代码行数:17，代码来源:simcom_bb_portable.c
示例12: spitz_init_spi
static void __init spitz_init_spi(void)
{
int err;
err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
if (err)
return;
err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
if (err)
goto err_free_1;
err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
if (err)
goto err_free_2;
err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
if (err)
goto err_free_3;
err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
if (err)
goto err_free_3;
err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
if (err)
goto err_free_3;
if (machine_is_akita()) {
spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
}
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
return;
err_free_3:
gpio_free(SPITZ_GPIO_MAX1111_CS);
err_free_2:
gpio_free(SPITZ_GPIO_LCDCON_CS);
err_free_1:
gpio_free(SPITZ_GPIO_ADS7846_CS);
}
开发者ID:10x-Amin，项目名称:nAa-kernel，代码行数:42，代码来源:spitz.c
示例13: pcm027_init
/*
* pcm027_init - breath some life into the board
*/
static void __init pcm027_init(void)
{
/* system bus arbiter setting
* - Core_Park
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
platform_add_devices(devices, ARRAY_SIZE(devices));
/* at last call the baseboard to initialize itself */
#ifdef CONFIG_MACH_PCM990_BASEBOARD
pcm990_baseboard_init();
#endif
pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
开发者ID:jakev，项目名称:CobraDroidBeta，代码行数:23，代码来源:pcm027.c
示例14: tosa_init
static void __init tosa_init(void)
{
int dummy;
pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
gpio_set_wake(MFP_PIN_GPIO1, 1);
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
PCFR |= PCFR_OPDE;
PMCR = 0x01;
dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:39，代码来源:tosa.c
示例15: zeus_init
static void __init zeus_init(void)
{
u16 dm9000_msc = DM9K_MSC_VALUE;
u32 msc0, msc1;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
/* Fix timings for dm9000s (CS1/CS2)*/
msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
__raw_writel(msc0, MSC0);
__raw_writel(msc1, MSC1);
pm_power_off = zeus_power_off;
zeus_setup_apm();
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
zeus_register_ohci();
if (zeus_setup_fb_gpios())
pr_err("Failed to setup fb gpios\n");
else
pxa_set_fb_info(NULL, &zeus_fb_info);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
pxa_set_ac97_info(&zeus_ac97_info);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
regulator_has_full_constraints();
}
开发者ID:1059232202，项目名称:linux，代码行数:38，代码来源:zeus.c
示例16: poodle_init_spi
static void __init poodle_init_spi(void)
{
pxa2xx_set_spi_info(1, &poodle_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
}
开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:5，代码来源:poodle.c
示例17: cmx270_init_spi
static void __init cmx270_init_spi(void)
{
pxa2xx_set_spi_info(2, &cm_x270_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
}
开发者ID:BinVul，项目名称:linux2.6.32，代码行数:5，代码来源:cm-x270.c
示例18: z2_spi_init
static void __init z2_spi_init(void)
{
pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}
开发者ID:0-T-0，项目名称:ps4-linux，代码行数:6，代码来源:z2.c
示例19: em_x270_init_spi
static void __init em_x270_init_spi(void)
{
pxa2xx_set_spi_info(1, &em_x270_spi_info);
pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
}
开发者ID:Korn1699，项目名称:linux，代码行数:6，代码来源:em-x270.c
示例20: corgi_init_spi
static void __init corgi_init_spi(void)
{
pxa2xx_set_spi_info(1, &corgi_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
}
开发者ID:1206697066，项目名称:kernel2.6.34，代码行数:5，代码来源:corgi.c
注：本文中的pxa2xx_set_spi_info函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论