C++ pwm_disable函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pwm_disable函数的典型用法代码示例。如果您正苦于以下问题：C++ pwm_disable函数的具体用法？C++ pwm_disable怎么用？C++ pwm_disable使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pwm_disable函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: max77693_haptic_enable

static void max77693_haptic_enable(struct max77693_haptic *haptic)
{
	int error;

	if (haptic->enabled)
		return;

	error = pwm_enable(haptic->pwm_dev);
	if (error) {
		dev_err(haptic->dev,
			"failed to enable haptic pwm device: %d\n", error);
		return;
	}

	error = max77693_haptic_lowsys(haptic, true);
	if (error)
		goto err_enable_lowsys;

	error = max77693_haptic_configure(haptic, true);
	if (error)
		goto err_enable_config;

	haptic->enabled = true;

	return;

err_enable_config:
	max77693_haptic_lowsys(haptic, false);
err_enable_lowsys:
	pwm_disable(haptic->pwm_dev);
}

开发者ID:3null，项目名称:linux，代码行数:31，代码来源:max77693-haptic.c

示例2: pwm_backlight_remove

static int pwm_backlight_remove(struct platform_device *pdev)
{
	struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
	struct backlight_device *bl = platform_get_drvdata(pdev);
	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
	struct pin_config new_pin_config;

	backlight_device_unregister(bl);
	pwm_config(pb->pwm, 0, pb->period);
	pwm_disable(pb->pwm);
	pwm_free(pb->pwm);
	if (data && data->exit)
		data->exit(&pdev->dev);
	if (data && pdev->dev.of_node) {
		kfree(data);
		pdev->dev.platform_data = NULL;
	}


	/*reset the pwm pin to GPIO function if defined in the kernel-dtb*/
	if (pwm_pin >= 0 && pwm_pin_reboot_func >= 0) {
		pr_info("remove reset the pwm pin to GPIO function\r\n");
		pr_err("remove reset the pwm pin to GPIO function\r\n");
		new_pin_config.name = pwm_pin;
		pinmux_get_pin_config(&new_pin_config);
		new_pin_config.func = pwm_pin_reboot_func;
		pinmux_set_pin_config(&new_pin_config);

		gpio_direction_output( 24, 0 );
		gpio_set_value( 24, 0 );

	}

	return 0;
}

开发者ID:birey，项目名称:android_kernel_samsung_kyleproxx，代码行数:35，代码来源:pwm_bl.c

示例3: vibtonz_en

void vibtonz_en(bool en)
{
	struct vibrator_drvdata	*data = g_data;

	if (en) {
		if (data->running)
			return ;
		if (data->pdata->motor_en)
			data->pdata->motor_en(true);
		else
			regulator_enable(data->regulator);
		i2c_max8997_hapticmotor(data, true);
		pwm_enable(data->pwm);
		data->running = true;
	} else {
		if (!data->running)
			return ;

		pwm_disable(data->pwm);
		i2c_max8997_hapticmotor(data, false);
		if (data->pdata->motor_en)
			data->pdata->motor_en(false);
		else
			regulator_force_disable(data->regulator);
		data->running = false;
	}
}

开发者ID:morristech，项目名称:xxICSKernel，代码行数:27，代码来源:max8997_vibrator.c

示例4: ev3_output_port_unregister

void ev3_output_port_unregister(struct lego_port_device *port)
{
	struct ev3_output_port_data *data;

	/* port can be null if disabled via module parameter */
	if (!port)
		return;

	data = container_of(port, struct ev3_output_port_data, out_port);
	pwm_disable(data->pwm);
	pwm_put(data->pwm);
	hrtimer_cancel(&data->timer);
	cancel_work_sync(&data->change_uevent_work);
	cancel_work_sync(&data->work);
	if (data->motor)
		ev3_output_port_unregister_motor(&data->work);
	if (port->mode == EV3_OUTPUT_PORT_MODE_RAW)
		ev3_output_port_disable_raw_mode(data);
	lego_port_unregister(&data->out_port);
	ev3_output_port_float(data);
	gpio_free_array(data->gpio, ARRAY_SIZE(data->gpio));
	put_legoev3_analog(data->analog);
	dev_set_drvdata(&port->dev, NULL);
	kfree(data);
}

开发者ID:zanderdk，项目名称:lego-linux-drivers，代码行数:25，代码来源:legoev3_ports_out.c

示例5: qpnp_vib_set

static int qpnp_vib_set(struct qpnp_vib *vib, int on)
{
    int rc;
    u8 val;

    if (on) {
        if (vib->mode != QPNP_VIB_MANUAL)
            pwm_enable(vib->pwm_info.pwm_dev);
        else {
            val = vib->reg_en_ctl;
            val |= QPNP_VIB_EN;
            rc = qpnp_vib_write_u8(vib, &val,
                                   QPNP_VIB_EN_CTL(vib->base));
            if (rc < 0)
                return rc;
            vib->reg_en_ctl = val;
        }
    } else {
        if (vib->mode != QPNP_VIB_MANUAL)
            pwm_disable(vib->pwm_info.pwm_dev);
        else {
            val = vib->reg_en_ctl;
            val &= ~QPNP_VIB_EN;
            rc = qpnp_vib_write_u8(vib, &val,
                                   QPNP_VIB_EN_CTL(vib->base));
            if (rc < 0)
                return rc;
            vib->reg_en_ctl = val;
        }
    }

    return 0;
}

开发者ID:chhapil，项目名称:Kernel-Lenovo-A6000-KK，代码行数:33，代码来源:qpnp-vibrator.c

示例6: qpnp_hap_set

/* set api for haptics */
static int qpnp_hap_set(struct qpnp_hap *hap, int on)
{
	int rc = 0;

	if (hap->play_mode == QPNP_HAP_PWM) {
		if (on)
			rc = pwm_enable(hap->pwm_info.pwm_dev);
		else
			pwm_disable(hap->pwm_info.pwm_dev);
	} else if (hap->play_mode == QPNP_HAP_BUFFER ||
			hap->play_mode == QPNP_HAP_DIRECT) {
		if (on) {
			rc = qpnp_hap_mod_enable(hap, on);
			if (rc < 0)
				return rc;
			rc = qpnp_hap_play(hap, on);
		} else {
			rc = qpnp_hap_play(hap, on);
			if (rc < 0)
				return rc;

			rc = qpnp_hap_mod_enable(hap, on);
		}
	}

	return rc;
}

开发者ID:TeamRegular，项目名称:android_kernel_lge_msm8992，代码行数:28，代码来源:qpnp-haptic.c

示例7: led_pwm_exit

static void led_pwm_exit(struct led_t * led)
{
	struct led_pwm_private_data_t * dat = (struct led_pwm_private_data_t *)led->priv;

	dat->brightness = 0;
	pwm_disable(dat->pwm);
}

开发者ID:philippe-nuaa，项目名称:xboot，代码行数:7，代码来源:led-pwm.c

示例8: ImmVibeSPI_ForceOut_AmpDisable

/*
** Called to disable amp (disable output force)
*/
IMMVIBESPIAPI VibeStatus ImmVibeSPI_ForceOut_AmpDisable(VibeUInt8 nActuatorIndex)
{
#if 0
#error Please review the code between the #if and #endif

    if (g_bAmpEnabled)
    {
        DbgOut((KERN_DEBUG "ImmVibeSPI_ForceOut_AmpDisable.\n"));

        g_bAmpEnabled = false;

#if 0
        mhn_gpio_set_level(GPIO_EN, GPIO_LEVEL_LOW);
        mz_ops.bstat &= ~HN_BATTERY_MOTOR;
#endif
    }
#endif
    if (g_bAmpEnabled)
    {
        g_bAmpEnabled = false;

        pwm_config(Immvib_pwm, 0, freq_count/2);
        pwm_disable(Immvib_pwm);

        //gpio_request(GPIO_VIBTONE_EN1, "GPIO_VIBTONE_EN1");
        gpio_direction_output(GPIO_VIBTONE_EN1, GPIO_LEVEL_LOW);
        gpio_direction_input(GPIO_VIBTONE_EN1);
        s3c_gpio_setpull(GPIO_VIBTONE_EN1,S3C_GPIO_PULL_DOWN);
        //gpio_free(GPIO_VIBTONE_EN1);
    }

    return VIBE_S_SUCCESS;
}

开发者ID:angel12，项目名称:sch-i510_kernel，代码行数:36，代码来源:ImmVibeSPI.c

示例9: pwm_backlight_update_status

static int pwm_backlight_update_status(struct backlight_device *bl)
{
	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
	int brightness = bl->props.brightness;
	int max = bl->props.max_brightness;

	if (bl->props.power != FB_BLANK_UNBLANK)
		brightness = 0;
	

	if (bl->props.fb_blank != FB_BLANK_UNBLANK) 
		brightness = 0;

	if (pb->notify)
		brightness = pb->notify(pb->dev, brightness);

	if (brightness == 0) {
		pwm_config(pb->pwm, 0, pb->period);
		pwm_disable(pb->pwm);
	} else {
		pwm_config(pb->pwm, asus_remapped_brightness[brightness] * (pb->period / 100) / max, pb->period);
		pwm_enable(pb->pwm);
	}

	if (pb->notify_after)
		pb->notify_after(pb->dev, brightness);

	return 0;
}

开发者ID:corvusmod，项目名称:kernel_asus_tf101-lumpy，代码行数:29，代码来源:pwm_bl.c

示例10: pwm_beeper_event

static int pwm_beeper_event(struct input_dev *input,
			    unsigned int type, unsigned int code, int value)
{
	int ret = 0;
	struct pwm_beeper *beeper = input_get_drvdata(input);
	unsigned long period;

	if (type != EV_SND || value < 0)
		return -EINVAL;

	switch (code) {
	case SND_BELL:
		value = value ? 1000 : 0;
		break;
	case SND_TONE:
		break;
	default:
		return -EINVAL;
	}

	if (value == 0) {
		pwm_disable(beeper->pwm);
	} else {
		period = HZ_TO_NANOSECONDS(value);
		ret = pwm_config(beeper->pwm, period / 2, period);
		if (ret)
			return ret;
		ret = pwm_enable(beeper->pwm);
		if (ret)
			return ret;
		beeper->period = period;
	}

	return 0;
}

开发者ID:020gzh，项目名称:linux，代码行数:35，代码来源:pwm-beeper.c

示例11: stopPwm

int stopPwm(char *channel)
{
    char key[8];
    int allowed = -1;

    clear_error_msg();

    if (!get_pwm_key(channel, key)) {
        printf("Invalid PWM key or name.");
        return 0;
    }

    // Check to see if PWM is allowed on the hardware
    // A 1 means we're good to go
    allowed = pwm_allowed(key);
    if (allowed == -1) {
        char err[2000];
        snprintf(err, sizeof(err), "Error determining hardware. (%s)", get_error_msg());
        return 0;
    } else if (allowed == 0) {
        char err[2000];
        snprintf(err, sizeof(err), "PWM %s not available on current Hardware", key);
        return 0;
    }

    if (pwm_disable(key) < 0) {
        char err[2000];
        snprintf(err, sizeof(err), "PWM: %s issue: (%s)", channel, get_error_msg());
        return 0;
    }
}

开发者ID:Groguard，项目名称:CHIP_IO_C，代码行数:31，代码来源:chip_io_c_pwm.c

示例12: mipi_toshiba_set_backlight

static void mipi_toshiba_set_backlight(struct msm_fb_data_type *mfd)
{
	int ret;
	static int bklight_pwm_cfg;

	if (bklight_pwm_cfg == 0) {
		mipi_bklight_pwm_cfg();
		bklight_pwm_cfg++;
	}

	if (bl_lpm) {
		ret = pwm_config(bl_lpm, MIPI_TOSHIBA_PWM_DUTY_LEVEL *
			mfd->bl_level, MIPI_TOSHIBA_PWM_PERIOD_USEC);
		if (ret) {
			pr_err("pwm_config on lpm failed %d\n", ret);
			return;
		}
		if (mfd->bl_level) {
			ret = pwm_enable(bl_lpm);
			if (ret)
				pr_err("pwm enable/disable on lpm failed"
					"for bl %d\n",	mfd->bl_level);
		} else {
			pwm_disable(bl_lpm);
		}
	}
}

开发者ID:Albinoman887，项目名称:pyramid-3.4.10，代码行数:27，代码来源:mipi_toshiba.c

示例13: max77665_haptic_on

static int max77665_haptic_on(struct haptic_data *chip, bool en)
{
	int ret = 0;

	if (en) {
		ret = max77665_update_reg(chip->pmic, MAX77665_PMIC_REG_LSCNFG,
				LSEN, LSEN_MASK);
		ret = max77665_update_reg(chip->client,
					MAX77665_HAPTIC_REG_CONFIG2, 
					(0x1 << HAPTIC_CONF2_MEN_SHIFT),
					HAPTIC_CONF2_MEN_MASK);

		ret = pwm_config(chip->pwm, chip->duty,
			   chip->period);
		ret = pwm_enable(chip->pwm);

	} else {
		pwm_disable(chip->pwm);
		ret = max77665_update_reg(chip->client,
					MAX77665_HAPTIC_REG_CONFIG2, 
					(0x0 << HAPTIC_CONF2_MEN_SHIFT),
					HAPTIC_CONF2_MEN_MASK);
		ret = max77665_update_reg(chip->pmic, MAX77665_PMIC_REG_LSCNFG,
				LSDEN, LSEN_MASK);
	}
	return ret;
}

开发者ID:Abioy，项目名称:meizu-mx-kernel，代码行数:27，代码来源:max77665_haptic.c

示例14: msm_flashlight_led_set

static void msm_flashlight_led_set(struct led_classdev *led_cdev,
        enum led_brightness value)
{
	int rc = 0;
        int PWM_PERIOD = NSEC_PER_SEC / 500;

	if(value==1) // some apps expect the flashlight to be either on or off
		value=100;

        if (!msm_flash_pwm) {
                rc = pm8058_gpio_config( 23, &camera_flash);
                if (rc)  {
                	pr_err("%s PMIC GPIO 23 write failed\n", __func__);
                	return;
        	}
                msm_flash_pwm = pwm_request(0, "camera-flash");
                if (msm_flash_pwm == NULL) {
                        pr_err("%s: FAIL pwm_request(): msm_flash_pwm=%p\n",
                               __func__, msm_flash_pwm);
                        msm_flash_pwm = NULL;
                        return;
                }
        }
	if(value==0) {
		pwm_disable(msm_flash_pwm);
	} else {
		rc = pwm_config(msm_flash_pwm,(PWM_PERIOD/255)*value/NSEC_PER_USEC,PWM_PERIOD/NSEC_PER_USEC);
	        if (rc >= 0)
        		rc = pwm_enable(msm_flash_pwm);
	}
}

开发者ID:miuiportugal，项目名称:kernel_u8800-1，代码行数:31，代码来源:leds-msm-pmic.c

示例15: pwm_test_store_run

static ssize_t pwm_test_store_run(struct device *dev,
		struct device_attribute *attr, const char *buf, size_t count)
{
	int rc;
	struct pwm_test *pwm_test = dev_get_drvdata(dev);
	int run;

	rc = kstrtoint(buf, 0, &run);
	if (rc)
		return rc;

	/* only 0 & 1 allowed */
	if (run != 0 && run != 1)
		return -EINVAL;

	/* same state, don't bother */
	if (run == pwm_test->run)
		return count;

	if (run) {
		rc = pwm_enable(pwm_test->pwm);
		if (rc != 0) {
			dev_err(dev, "pwm_enable failed\n");
			return rc;
		}
	} else
		pwm_disable(pwm_test->pwm);

	pwm_test->run = run;

	return count;
}

开发者ID:SynerconTechnologies，项目名称:FLA-Kernel，代码行数:32，代码来源:pwm_test.c

示例16: pm8058_pwm_led_brightness_set

static void pm8058_pwm_led_brightness_set(struct led_classdev *led_cdev,
					  enum led_brightness brightness)
{
	struct pm8058_led_data *ldata;
	int enable = 0;

	/* struct pwm_device* pwm_led; */
	ldata = container_of(led_cdev, struct pm8058_led_data, ldev);

	pwm_disable(ldata->pwm_led);

	brightness = (brightness > LED_FULL) ? LED_FULL : brightness;
	brightness = (brightness < LED_OFF) ? LED_OFF : brightness;
	LED_INFO_LOG("%s: bank %d brightness %d\n", __func__,
	       ldata->bank, brightness);

	enable = (brightness) ? 1 : 0;
	if (strcmp(ldata->ldev.name, "charming-led") == 0)
		charming_led_enable(enable);

	if (brightness) {
		pwm_config(ldata->pwm_led, 64000, 64000);
#if 0
		pwm_conf.pwm_size = ldata->pwm_size;
		pwm_conf.clk = ldata->clk;
		pwm_conf.pre_div = ldata->pre_div;
		pwm_conf.pre_div_exp = ldata->pre_div_exp;
		pwm_conf.pwm_value = ldata->pwm_value;
		pwm_conf.bypass_lut = 1;
		pwm_configure(ldata->pwm_led, &pwm_conf);
#endif
		pwm_enable(ldata->pwm_led);
	}
}

开发者ID:vurrut，项目名称:pyramid_kernel，代码行数:34，代码来源:leds-pm8058.c

示例17: pwm_backlight_update_status

static int pwm_backlight_update_status(struct backlight_device *bl)
{
	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
	int brightness = bl->props.brightness;
	int max = bl->props.max_brightness;

	if (bl->props.power != FB_BLANK_UNBLANK)
		brightness = 0;

	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
		brightness = 0;

	if (pb->notify)
		brightness = pb->notify(pb->dev, brightness);

	if (brightness == 0) {
		pwm_config(pb->pwm, 0, pb->period);
		pwm_disable(pb->pwm);
	} else {
		brightness = pb->lth_brightness +
			(brightness * (pb->period - pb->lth_brightness) / max);
		pwm_config(pb->pwm, brightness, pb->period);
		pwm_enable(pb->pwm);
	}
	return 0;
}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:26，代码来源:pwm_bl.c

示例18: pwm_fan_suspend

static int pwm_fan_suspend(struct platform_device *pdev, pm_message_t state)
{
	struct fan_dev_data *fan_data = platform_get_drvdata(pdev);
	int err;

	mutex_lock(&fan_data->fan_state_lock);
	cancel_delayed_work(&fan_data->fan_ramp_work);
	/*Turn the fan off*/
	fan_data->fan_cur_pwm = 0;
	fan_data->next_target_pwm = 0;

	set_pwm_duty_cycle(0, fan_data);
	pwm_disable(fan_data->pwm_dev);
	pwm_free(fan_data->pwm_dev);

	err = gpio_request(fan_data->pwm_gpio, "pwm-fan");
	if (err < 0) {
		dev_err(&pdev->dev, "%s:gpio request failed %d\n",
			__func__, fan_data->pwm_gpio);
	}

	gpio_direction_output(fan_data->pwm_gpio, 1);

	/*Stop thermal control*/
	fan_data->fan_temp_control_flag = 0;
	mutex_unlock(&fan_data->fan_state_lock);
	return 0;
}

开发者ID:SuperPichu，项目名称:shield-tablet-kernel，代码行数:28，代码来源:pwm_fan.c

示例19: max77660_haptic_enable

static void max77660_haptic_enable(struct max77660_haptic *chip, bool enable)
{
//  printk("Ivan max77660_haptic_enable = %d \n", enable);
	if (chip->enabled == enable)
		return;

//	mutex_lock(&chip->enable_lock);
	chip->enabled = enable;

	if (enable) {
//  printk("Ivan max77660_haptic_enable ENABLE! \n");	  
		regulator_enable(chip->regulator);
		max77660_haptic_configure(chip);
		if (chip->mode == MAX77660_EXTERNAL_MODE)
			pwm_enable(chip->pwm);
//		haptic_enable_processing = 0;		//Ivan
	} else {
//  printk("Ivan max77660_haptic_enable DISABLE! \n");	  
		max77660_haptic_configure(chip);
		
	max77660_reg_write(chip->dev->parent, MAX77660_HAPTIC_SLAVE,
		MAX77660_HAPTIC_REG_CONF2, 2);
	
		if (chip->mode == MAX77660_EXTERNAL_MODE)
			pwm_disable(chip->pwm);
		regulator_disable(chip->regulator);
	}
//	mutex_unlock(&chip->enable_lock);
}

开发者ID:Packmaan7144，项目名称:kernel_nvidia_s8515，代码行数:29，代码来源:max77660_haptic.c

示例20: pwm_backlight_edpcb

static void pwm_backlight_edpcb(unsigned int new_state, void *priv_data)
{
	struct backlight_device *bl = (struct backlight_device *) priv_data;
	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
	int max = bl->props.max_brightness;
	int brightness = pb->edp_brightness_states[new_state];

	if (brightness == 0) {
		gpio_set_value(DSI_PANEL_BL_EN, 0);

		pwm_config(pb->pwm, 0, pb->period);
		pwm_disable(pb->pwm);
	} else {
		brightness = pb->lth_brightness +
			(brightness * (pb->period - pb->lth_brightness) / max);
		pwm_config(pb->pwm, brightness, pb->period);
		pwm_enable(pb->pwm);

		msleep(10);
		gpio_set_value(DSI_PANEL_BL_EN, 1);
	}

	if (pb->notify_after)
		pb->notify_after(pb->dev, brightness);
}

开发者ID:thypon，项目名称:bowser-kernel，代码行数:25，代码来源:pwm_bl.c

注：本文中的pwm_disable函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ pwm_enable函数代码示例发布时间：2022-05-30

C++ pwm_config函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19194|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8327|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9658|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ pwm_disable函数代码示例

示例1: max77693_haptic_enable

示例2: pwm_backlight_remove

示例3: vibtonz_en

示例4: ev3_output_port_unregister

示例5: qpnp_vib_set

示例6: qpnp_hap_set

示例7: led_pwm_exit

示例8: ImmVibeSPI_ForceOut_AmpDisable

示例9: pwm_backlight_update_status

示例10: pwm_beeper_event

示例11: stopPwm

示例12: mipi_toshiba_set_backlight

示例13: max77665_haptic_on

示例14: msm_flashlight_led_set

示例15: pwm_test_store_run

示例16: pm8058_pwm_led_brightness_set

示例17: pwm_backlight_update_status

示例18: pwm_fan_suspend

示例19: max77660_haptic_enable

示例20: pwm_backlight_edpcb

请发表评论

全部评论

上一篇：

下一篇：

AnsiString在Delphi中虽然不可用，但是，在

krishnaik06/Machine-Learning-in-90-days

CVE-2022-31537

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053