本文整理汇总了C++中puthex函数的典型用法代码示例。如果您正苦于以下问题：C++ puthex函数的具体用法？C++ puthex怎么用？C++ puthex使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了puthex函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: main
int main( void )
{
avr_init();
pulse_init();
puts( "$Id: tach.c,v 2.0 2002/09/22 02:10:18 tramm Exp $" );
putnl();
while( 1 )
{
puthex( high_bits );
puthex( time() );
putc( ':' );
puthexs( pulse_0 );
putc( ' ' );
puthexs( pulse_1 );
putnl();
pulse_1 = pulse_0 = 0;
msleep( 8192 );
}
return 0;
}
开发者ID:anjdreas，项目名称:Helicopter-Autopilot-Simulator，代码行数:26，代码来源:tach.c
示例2: init_kheap
void init_kheap()
{
kernel_heap = build_heap((uintptr_t*)HEAP_BEGIN, 1, 0);
// Self-test
puts("heap self-test\n");
uint32_t *test_alloc = (uint32_t*)kalloc(sizeof(uint32_t));
uint32_t *test_alloc_2 = (uint32_t*)kalloc(sizeof(uint32_t));
puts("var1(uint32_t)=");
puthex((uintptr_t)test_alloc);
puts(", var2(uint32_t)=");
puthex((uintptr_t)test_alloc_2);
puts("\n");
*test_alloc = 0x1234ABCD;
*test_alloc_2 = 0xCAFEBEEF;
kfree((uintptr_t*)test_alloc);
kfree((uintptr_t*)test_alloc_2);
uint32_t* test_alloc_3 = (uint32_t*)kalloc(sizeof(uint64_t));
puts("var1 and var2 freed, var3(uint64_t)=");
puthex((uintptr_t)test_alloc_3);
puts(", should be ");
puthex((uintptr_t)test_alloc);
puts("\n");
if(test_alloc_3 == test_alloc)
puts("self-test succeeded\n");
kfree((uintptr_t*)test_alloc_3);
}
开发者ID:MrXedac，项目名称:riku，代码行数:33，代码来源:heap.c
示例3: decompress_kernel
void decompress_kernel(unsigned long boot_heap_start)
{
unsigned long zimage_start, zimage_size;
__stack_chk_guard_setup();
zimage_start = (unsigned long)(&__image_begin);
zimage_size = (unsigned long)(&__image_end) -
(unsigned long)(&__image_begin);
puts("zimage at: ");
puthex(zimage_start);
puts(" ");
puthex(zimage_size + zimage_start);
puts("\n");
/* This area are prepared for mallocing when decompressing */
free_mem_ptr = boot_heap_start;
free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
/* Display standard Linux/MIPS boot prompt */
puts("Uncompressing Linux at load address ");
puthex(VMLINUX_LOAD_ADDRESS_ULL);
puts("\n");
/* Decompress the kernel with according algorithm */
decompress((char *)zimage_start, zimage_size, 0, 0,
(void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error);
/* FIXME: should we flush cache here? */
puts("Now, booting the kernel...\n");
}
开发者ID:asdlei00，项目名称:linux，代码行数:32，代码来源:decompress.c
示例4: startup_message
void startup_message(void)
{
putcrlf();
#ifdef __GNUC__
putstring("GCC " __VERSION__ "\r\n");
#endif
putstring(name_string);
putspace();
putstring(version_string);
/* Silicon Revision */
putstring(" Mask(");
puthex(ECHV);
/* ADC reading codes Board ID */
putstring(") ID(");
putstring(board_id_to_string());
/* Stack pointer */
putstring(") SP(");
puthex(SP);
putstring(") ");
putstring(date_string);
putspace();
putstring(time_string);
/* now for some manufacturing data */
putcrlf();
if( manufacturing_find_tag("T#") )
manufacturing_print_tag();
putspace();
if( manufacturing_find_tag("SN") || manufacturing_find_tag("S#") )
manufacturing_print_tag();
}
开发者ID:XVilka，项目名称:OpenEC，代码行数:31，代码来源:main.c
示例5: debug_section_header
void debug_section_header(Elf64_Shdr* h)
{
puts("-- Section header --\n");
puts("Name: ");
puthex(h->sh_name);
puts("\n");
puts("Type: ");
puthex(h->sh_type);
puts("\n");
puts("Flags: ");
puthex(h->sh_flags);
puts("\n");
puts("Virtual address: ");
puthex(h->sh_vaddr);
puts("\n");
puts("Offset in file: ");
puthex(h->sh_offset);
puts("\n");
puts("Size of section: ");
puthex(h->sh_size);
puts("\n");
puts("Link: ");
puthex(h->sh_link);
puts("\n");
puts("Misc info: ");
puthex(h->sh_info);
puts("\n");
puts("Alignment: ");
puthex(h->sh_addralign);
puts("\n");
puts("Size of entries in section table: ");
puthex(h->sh_entsize);
puts("\n");
}
开发者ID:pranas，项目名称:jaos64，代码行数:34，代码来源:elf.c
示例6: ow_dump
void ow_dump()
{
putspace();
puthex( transfer_state );
putspace();
puthex( transfer_cnt );
}
开发者ID:XVilka，项目名称:OpenEC，代码行数:7，代码来源:one_wire.c
示例7: memcpy
u8 NFC_Module::InListPassiveTarget(u8 *buf, u8 brty,
u8 len, u8 *idata, u8 maxtg)
{
nfc_buf[0] = PN532_COMMAND_INLISTPASSIVETARGET;
nfc_buf[1] = maxtg;
nfc_buf[2] = brty;
if(len){
memcpy(nfc_buf+3, idata, len);
}
if(!write_cmd_check_ack(nfc_buf, 3+len)){
return 0;
}
#ifdef PN532DEBUG
puthex(nfc_buf, 3+len);
Serial.println();
#endif
// puthex(nfc_buf, 3+len);
// Serial.println();
/** "Waiting for IRQ (indicates card presence)" */
wait_ready();
wait_ready();
wait_ready();
#ifdef PN532DEBUG
Serial.print(" Found Card.\n");
#endif
read_dt(nfc_buf,40);
// puthex(nfc_buf, nfc_buf[3]+6);
// Serial.println();
if(nfc_buf[NFC_FRAME_ID_INDEX-1] != 0xD5){
return 0;
}
puthex(nfc_buf, nfc_buf[3]+6);
Serial.println();
if(nfc_buf[NFC_FRAME_ID_INDEX] != (PN532_COMMAND_INLISTPASSIVETARGET+1)){
return 0;
}
// if(nfc_buf[NFC_FRAME_ID_INDEX+1]!=1){
//#ifdef PN532DEBUG
// Serial.println(nfc_buf[NFC_FRAME_ID_INDEX+1],DEC);
//#endif
// return 0;
// }
if(brty == PN532_BRTY_ISO14443A){
/** UUID length */
buf[0] = nfc_buf[12];
for(u8 i=1; i<5; i++){
buf[i] = nfc_buf[12+i];
}
}else{
buf[0] = nfc_buf[3];
memcpy(buf, nfc_buf+5, nfc_buf[3]);
}
return 1;
}
开发者ID:Swifty88，项目名称:nfc-pn532，代码行数:59，代码来源:nfc.cpp
示例8: aes_dec_firstround
static
void aes_dec_firstround(aes_cipher_state_t* state, const aes_roundkey_t* k)
{
uint8_t i;
/// *** STEP 1: keyAdd ***
for(i=0; i<16; ++i)
{
state->s[i] ^= k->ks[i];
}
#ifdef ENCRYPTION_DEBUG
beginSerial(115200, 0);
digitalWrite(23,0x01);
digitalWrite(11,0x00);
printString("\n\n*** STEP 1: keyAdd --> ", 0);
_delay_ms(3);
for(i=0; i<16; ++i)
{
puthex((char)state->s[i],0);
_delay_ms(3);
}
#endif
/// *** STEP 2: invert shiftRows ***
aes_invshiftcol(state->s+1, 1);
aes_invshiftcol(state->s+2, 2);
aes_invshiftcol(state->s+3, 3);
#ifdef ENCRYPTION_DEBUG
printString("\n*** STEP 2: shiftRows --> ", 0);
_delay_ms(3);
for(i=0; i<16; ++i)
{
puthex((char)state->s[i],0);
_delay_ms(3);
}
#endif
/// *** STEP 3: subBytes ***
for(i=0; i<16; ++i)
{
state->s[i] = pgm_read_byte(aes_invsbox+state->s[i]);
}
#ifdef ENCRYPTION_DEBUG
printString("\n*** STEP 3: subBytes --> ", 0);
_delay_ms(3);
for(i=0; i<16; ++i)
{
puthex((char)state->s[i],0);
_delay_ms(3);
}
#endif
}
开发者ID:Console32，项目名称:waspmoteapi，代码行数:57，代码来源:aes_dec.c
示例9: set_rime_addr
//added by dongbo huang, this is to set the short address of this node
static void
set_rime_addr(void)
{
signed char i;
#if CC2530_CONF_MAC_FROM_PRIMARY
unsigned char __xdata *macp = &X_IEEE_ADDR;
#else
unsigned char __code *macp = (__code unsigned char *)0xFFE8;
#endif
//#if CC2530_CONF_MAC_FROM_PRIMARY
// putstring("Reading MAC from Info Page\r\n");
//#else
// putstring("Reading MAC from flash\r\n");
/*
* The MAC is always stored in 0xFFE8 of the highest BANK of our flash. This
* maps to address 0xFFF8 of our CODE segment, when this BANK is selected.
* Load the bank, read 8 bytes starting at 0xFFE8 and restore last BANK.
* Since we are called from main(), this MUST be BANK1 or something is very
* wrong. This code can be used even without a bankable firmware.
*/
/* Don't interrupt us to make sure no BANK switching happens while working */
// DISABLE_INTERRUPTS();
/* Switch to the BANKn,
* map CODE: 0x8000 - 0xFFFF to FLASH: 0xn8000 - 0xnFFFF */
// FMAP = CC2530_LAST_FLASH_BANK;
//#endif
for(i = (RIMEADDR_SIZE - 1); i >= 0; --i) {
rimeaddr_node_addr.u8[i] = *macp;
macp++;
}
#if !CC2530_CONF_MAC_FROM_PRIMARY
/* Remap 0x8000 - 0xFFFF to BANK1 */
FMAP = 1;
ENABLE_INTERRUPTS();
#endif
/* Now the address is stored MSB first */
#if STARTUP_CONF_VERBOSE
putstring("Rime configured with address ");
for(i = 0; i < RIMEADDR_SIZE - 1; i++) {
puthex(rimeaddr_node_addr.u8[i]);
putchar(':');
}
puthex(rimeaddr_node_addr.u8[i]);
putstring("\r\n");
#endif
cc2530_rf_set_addr(IEEE802154_PANID);
return;
}
开发者ID:hbofffw，项目名称:mywork，代码行数:58，代码来源:hello-world.c
示例10: PROCESS_THREAD
PROCESS_THREAD(test_send_process, ev, data)
{
static struct etimer et;
static char hello[5];
static int i;
static char *testvalue;
PROCESS_BEGIN();
etimer_set(&et,CLOCK_CONF_SECOND/100);
//event_temperature_send = process_alloc_event();
//event_uart_send = process_alloc_event();
//process_post(&test_send_process,event_uart_send,NULL);
while(1)
{
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
//PROCESS_WAIT_EVENT_UNTIL(ev == event_uart_send);
if(strncmp(rxbuf,"hello",5) == 0)
{
//putstring("instruction indicated");
strcpy(rxbuf,"");
bufpos = 0;
buflen = 0;
unsigned char __code *dst = (__code unsigned char *)FRAME802154_BROADCASTADDR;
puthex(*dst);
puthex(*dst++);
testvalue = getintvalue();
strcpy(testvalue,"hello");
printf("\r\ntest value is %s, function value = %d, initial value = %d\r\n", testvalue, (char*)getintvalue(),integerValue);
//strcpy(hello,"hello");
//now I'm trying to test the basic cc2530rf functionality
/*cc2530_rf_driver.init();
if(cc2530_rf_driver.send((void*)hello,sizeof("hello")) == RADIO_TX_OK)
{
strcpy(hello,"");
putstring("some packets sent");
}
else
putstring("send failed");
*/
//edited by dognbo huang, the codes commented below is used for to analyse the ADC module working procedure
//puttemperature();
//putstring("getting temperature...\r\n");
//process_post(&sensors_test_process,event_temperature_send,NULL);
}
else
{
strcpy(rxbuf,"");
bufpos = 0;
buflen = 0;
}
etimer_reset(&et);
}
PROCESS_END();
}
开发者ID:hbofffw，项目名称:mywork，代码行数:56，代码来源:hello-world.c
示例11: dumpmem
void
dumpmem (FILE * f, void *buf, unsigned int len, unsigned int offset)
{
unsigned int i;
unsigned int address;
unsigned char *p;
static const unsigned int MASK_LOWER = 0x0f;
char line[80];
if (offset >= len)
return;
address = offset;
p = ((unsigned char *) buf) + offset;
fputs(" Addr 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 2 4 6 8 A C E \n",f);
fputs("-------- ---- ---- ---- ---- ---- ---- ---- ---- ----------------\n",f);
while (p < ((unsigned char *) buf) + len)
{
for (i = 0; i < 50; i++)
line[i] = ' ';
for (; i < 80; i++)
line[i] = 0;
if ((address & ~MASK_LOWER) != address) /* address % 16 != 0 */
{
puthex ((address & ~MASK_LOWER), 8, line, 0);
for (i = 0; i < (address & MASK_LOWER); i++)
{
line[10 + i * 2 + i / 2] = ' ';
line[10 + i * 2 + i / 2 + 1] = ' ';
line[50 + i] = ' ';
}
address = address & ~MASK_LOWER;
}
else
{
puthex (address, 8, line, 0);
i = 0;
}
for (; i < 16; i++)
{
puthex (((long) *p) & 0x0ff, 2, line, 10 + i * 2 + i / 2);
line[50 + i] = '.';
if (isprint (*p))
line[50 + i] = *p;
if (++p >= (unsigned char *) buf + len)
break;
}
fputs (line, f);
fputs ("\n", f);
address += 16;
}
}
开发者ID:GNsunghokim，项目名称:rtos，代码行数:56，代码来源:test_common.c
示例12: wait_ready
u8 NFC_Module::P2PInitiatorTxRx(u8 *t_buf, u8 t_len, u8 *r_buf, u8 *r_len)
{
// wait_ready();
// wait_ready();
wait_ready(15);
nfc_buf[0] = PN532_COMMAND_INDATAEXCHANGE;
nfc_buf[1] = 0x01; // logical number of the relevant target
memcpy(nfc_buf+2, t_buf, t_len);
if(!write_cmd_check_ack(nfc_buf, t_len+2)){
return 0;
}
#ifdef PN532_P2P_DEBUG
Serial.println("Initiator DataExchange sent.");
#endif
wait_ready(200);
read_dt(nfc_buf, 60);
if(nfc_buf[5] != 0xD5){
return 0;
}
#ifdef PN532_P2P_DEBUG
Serial.println("Initiator DataExchange Get.");
#endif
if(nfc_buf[NFC_FRAME_ID_INDEX] != (PN532_COMMAND_INDATAEXCHANGE+1)){
#ifdef PN532_P2P_DEBUG
puthex(nfc_buf, nfc_buf[3]+7);
Serial.println("Send data failed");
#endif
return 0;
}
if(nfc_buf[NFC_FRAME_ID_INDEX+1]){
#ifdef PN532_P2P_DEBUG
Serial.print("InExchangeData Error:");
puthex(nfc_buf, nfc_buf[3]+7);
Serial.println();
#endif
return 0;
}
#ifdef PN532_P2P_DEBUG
puthex(nfc_buf, nfc_buf[3]+7);
Serial.println();
#endif
/** return read data */
*r_len = nfc_buf[3]-3;
memcpy(r_buf, nfc_buf+8, *r_len);
return 1;
}
开发者ID:babylazy，项目名称:smartdoor，代码行数:54，代码来源:nfc.cpp
示例13: print_ptr
int print_ptr(void *ptr)
{
int size;
size = get_size(ptr);
puthex((size_t)ptr);
ft_putstr(" - ");
puthex((size_t)(ptr + size));
ft_putstr(" : ");
print_nbr(size);
ft_putendl(" octets");
return (size);
}
开发者ID:jilth，项目名称:malloc，代码行数:13，代码来源:misc_func.c
示例14: debug_program_header
void debug_program_header(Elf64_Phdr* h)
{
puts("-- Program header --\n");
puts("Type: ");
puthex(h->p_type);
puts("\n");
puts("Flags: ");
puthex(h->p_flags);
puts("\n");
puts("Offset in file: ");
puthex(h->p_offset);
puts("\n");
puts("Virtual address: ");
puthex(h->p_vaddr);
puts("\n");
puts("Reserved: ");
puthex(h->p_paddr);
puts("\n");
puts("Segment size in file: ");
puthex(h->p_filesz);
puts("\n");
puts("Segment size in mem: ");
puthex(h->p_memsz);
puts("\n");
puts("Alignment: ");
puthex(h->p_align);
puts("\n");
}
开发者ID:pranas，项目名称:jaos64，代码行数:28，代码来源:elf.c
示例15: tcpip_handler
/*---------------------------------------------------------------------------*/
static void
tcpip_handler(void)
{
leds_on(LEDS_GREEN);
if(uip_newdata()) {
putstring("0x");
puthex(uip_datalen());
putstring(" bytes response=0x");
puthex((*(uint16_t *) uip_appdata) >> 8);
puthex((*(uint16_t *) uip_appdata) & 0xFF);
putchar('\n');
}
leds_off(LEDS_GREEN);
return;
}
开发者ID:1847123212，项目名称:ampm_contiki_wisun，代码行数:16，代码来源:client.c
示例16: dump_entry
static void
dump_entry(datum key, datum value)
{
int i;
if (yflag) {
if ((key.dsize >= 3) && (memcmp(key.dptr, "YP_", 3) == 0)) {
return;
}
}
if (pflag) {
putchar(' ');
for (i = 0; i < key.dsize; i++) {
if (isprint(key.dptr[i]) &&
!isspace(key.dptr[i]) &&
(key.dptr[i] != '\\')) {
putchar(key.dptr[i]);
} else {
putchar('\\');
puthex(key.dptr[i]);
}
}
putchar('\n');
putchar(' ');
for (i = 0; i < value.dsize; i++) {
if (isprint(value.dptr[i]) &&
(value.dptr[i] != ' ') &&
(value.dptr[i] != '\t') &&
(value.dptr[i] != '\\')) {
putchar(value.dptr[i]);
} else {
putchar('\\');
puthex(value.dptr[i]);
}
}
putchar('\n');
} else {
putchar(' ');
for (i = 0; i < key.dsize; i++) {
puthex(key.dptr[i]);
}
putchar('\n');
putchar(' ');
for (i = 0; i < value.dsize; i++) {
puthex(value.dptr[i]);
}
putchar('\n');
}
}
开发者ID:nalind，项目名称:gdbmdump，代码行数:48，代码来源:gdbmdump.c
示例17: memcpy
u8 NFC_Module::MifareWriteBlock(u8 block, u8 *buf)
{
nfc_buf[0] = PN532_COMMAND_INDATAEXCHANGE;
nfc_buf[1] = 1; // logical number of the relevant target
nfc_buf[2] = MIFARE_CMD_WRITE;
nfc_buf[3] = block;
memcpy(nfc_buf+4, buf, 16);
if(!write_cmd_check_ack(nfc_buf, 20)){
return 0;
}
wait_ready();
read_dt(nfc_buf, 26);
if(nfc_buf[NFC_FRAME_ID_INDEX] != (PN532_COMMAND_INDATAEXCHANGE+1)){
#ifdef PN532DEBUG
puthex(nfc_buf, 20);
Serial.println("Authentication fail.");
#endif
return 0;
}
if(nfc_buf[NFC_FRAME_ID_INDEX+1]){
return 0;
}
return 1;
}
开发者ID:babylazy，项目名称:smartdoor，代码行数:26，代码来源:nfc.cpp
示例18: getbyte
int getbyte(int byte)
{
if (byte == 0) return 106;
if (byte == 1) return 139;
if (byte == 2) return 120;
if (byte == 3) return 183;
if (byte == 4) return 69;
if (byte == 5) return 197;
if (byte == 6) return 147;
if (byte == 7) return 207;
if (byte == 8) return 35;
if (byte == 9) return 155;
if (byte == 10) return 122;
if (byte == 11) return 244;
if (byte == 12) return 125;
if (byte == 13) return 215;
if (byte == 14) return 69;
if (byte == 15) return 219;
if (byte == 16) return 2;
if (byte == 17) return 224;
puts("FAIL [abort]: request for byte #");
puthex(byte);
while(1);
return 0;
}
开发者ID:enricmcalvo，项目名称:virtexsquared，代码行数:25，代码来源:j4cbo.c
示例19: puthex
static void
puthex (long n, unsigned int digits, char *buf, unsigned int pos)
{
if (digits > 1)
puthex (n / 16, digits - 1, buf, pos);
buf[pos + digits - 1] = "0123456789abcdef"[n % 16];
}
开发者ID:GNsunghokim，项目名称:rtos，代码行数:7，代码来源:test_common.c
示例20: balo_printf
void __init balo_printf( char *f, ... )
{
int *arg = (int*)&f + 1;
char c;
int format = 0;
while((c = *f++) != 0) {
switch(c) {
default:
if(format) {
outc('%');
format = 0;
}
outc( c );
break;
case '%':
if( format ){
format = 0;
outc(c);
} else format = 1;
break;
case 'x':
if(format) puthex( *arg++ );
else outc(c);
format = 0;
break;
case 's':
if( format ) outs((char *)*arg++);
else outc(c);
format = 0;
break;
}
}
}
开发者ID:TitaniumBoy，项目名称:lin，代码行数:34，代码来源:print.c
注：本文中的puthex函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论