C++ putfonts8_asc函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中putfonts8_asc函数的典型用法代码示例。如果您正苦于以下问题：C++ putfonts8_asc函数的具体用法？C++ putfonts8_asc怎么用？C++ putfonts8_asc使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了putfonts8_asc函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	char s[40], mcursor[256], keybuf[32];
	int mx, my, i;

	init_gdtidt();
	init_pic();
	io_sti(); 

	fifo8_init(&keyfifo, 32, keybuf);
	io_out8(PIC0_IMR, 0xf9); 
	io_out8(PIC1_IMR, 0xef); 

	init_palette();
	init_screen8(binfo->vram, binfo->scrnx, binfo->scrny);
	mx = (binfo->scrnx - 16) / 2; 
	my = (binfo->scrny - 28 - 16) / 2;
	init_mouse_cursor8(mcursor, COL8_008484);
	putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, s);

	for (;;) {
		io_cli();
		if (fifo8_status(&keyfifo) == 0) {
			io_stihlt();
		} else {
			i = fifo8_get(&keyfifo);
			io_sti();
			boxfill8(binfo->vram, binfo->scrnx, COL8_008484, 0, 16, 15, 31);
			putfonts8_asc(binfo->vram, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
		}
	}  
 
}

开发者ID:GoodLuckBamboo，项目名称:hariboteos，代码行数:35，代码来源:bootpack.c

示例2: HariMain

void HariMain(void)
{
    char *vram;
    BOOTINFO_t *binfo;
    char mcursor[16*16];
    int mx, my;
    
    binfo = (BOOTINFO_t *)BOOTINFO_ENTRY;

    init_palette();
    init_screen(binfo->vram, binfo->scrnx, binfo->scrny);
    
    static char font_A[16] = {
		0x00, 0x18, 0x18, 0x18, 0x18, 0x24, 0x24, 0x24,
		0x24, 0x7e, 0x42, 0x42, 0x42, 0xe7, 0x00, 0x00
	};
    putfont8(binfo->vram, binfo->scrnx, 8, 8, COL8_0000FF, hankaku+'A'*16);
    putfonts8_asc(binfo->vram, binfo->scrnx, 16, 8, COL8_0000FF, "BC 123");
    
    putfonts8_asc(binfo->vram, binfo->scrnx, 31, 31, COL8_000000, "EasyOS.");
    putfonts8_asc(binfo->vram, binfo->scrnx, 30, 30, COL8_FFFFFF, "EasyOS.");
    
    mx = my = 100;
    init_mouse_cursor8(mcursor, COL8_008484);
    putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16);
fin:
    io_hlt();
    goto fin;    
}

开发者ID:zy-sunshine，项目名称:hackos01，代码行数:29，代码来源:bootpack.c

示例3: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	char s[40], mcursor[256], keybuf[32], mousebuf[128];
	int mx, my, i;

	init_gdtidt();
	init_pic();
	io_sti(); /* IDT/PIC的初始化结束，开启CPU中断 */

	fifo8_init(&keyfifo, 32, keybuf);
	fifo8_init(&mousefifo, 128, mousebuf);
	io_out8(PIC0_IMR, 0xf9); /* 许可PIC1和键盘(11111001) */
	io_out8(PIC1_IMR, 0xef); /* 许可鼠标(11101111) */

	init_keyboard();

	init_palette();
	init_screen8(binfo->vram, binfo->scrnx, binfo->scrny);
	mx = (binfo->scrnx - 16) / 2;
	my = (binfo->scrny - 28 - 16) / 2;
	init_mouse_cursor8(mcursor, COL8_008484);
	putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16);
	sprintf(s, "(%d, %d)", mx, my);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, s);

	enable_mouse();

	for (;;) {
		io_cli();
		if (fifo8_status(&keyfifo) + fifo8_status(&mousefifo) == 0) {
			/* J
			char ss[10];
			sprintf(ss, "%c", "J");
			putfonts8_asc(binfo->vram, binfo->scrnx, 100, 100, COL8_FFFFFF, ss);
			*/
			io_stihlt();
		} else if (fifo8_status(&keyfifo) != 0) {
			i = fifo8_get(&keyfifo);
			io_sti();
			sprintf(s, "%02X", i);
			boxfill8(binfo->vram, binfo->scrnx, COL8_008484, 0, 16, 15, 31);
			putfonts8_asc(binfo->vram, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
		} else if (fifo8_status(&mousefifo) != 0) {
			i = fifo8_get(&mousefifo);
			io_sti();
			sprintf(s, "%02X", i);
			boxfill8(binfo->vram, binfo->scrnx, COL8_008484, 32, 16, 47, 31);
			putfonts8_asc(binfo->vram, binfo->scrnx, 32, 16, COL8_FFFFFF, s);
		}
	}
}

开发者ID:NeilJudson，项目名称:HomemadeOS，代码行数:52，代码来源:bootpack.c

示例4: putfonts8_asc_sht

void putfonts8_asc_sht(struct SHEET *sht, int x, int y, int c, int b, char *s, int l)
{
	struct TASK *task = task_now();
	boxfill8(sht->buf, sht->bxsize, b, x, y, x + l * 8 - 1, y + 15);
	if (task->langmode != 0 && task->langbyte1 != 0) {
		putfonts8_asc(sht->buf, sht->bxsize, x, y, c, s);
		sheet_refresh(sht, x - 8, y, x + l * 8, y + 16);
	} else {
		putfonts8_asc(sht->buf, sht->bxsize, x, y, c, s);
		sheet_refresh(sht, x, y, x + l * 8, y + 16);
	}
	return;
}

开发者ID:barmi，项目名称:bxos，代码行数:13，代码来源:window.c

示例5: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) 0x0ff0;

	init_palette();
	init_screen(binfo->vram, binfo->scrnx, binfo->scrny);
	putfonts8_asc(binfo->vram, binfo->scrnx,  8,  8, COL8_FFFFFF, "ABC 123");
	putfonts8_asc(binfo->vram, binfo->scrnx, 31, 31, COL8_000000, "Haribote OS.");
	putfonts8_asc(binfo->vram, binfo->scrnx, 30, 30, COL8_FFFFFF, "Haribote OS.");

	for (;;) {
		io_hlt();
	}
}

开发者ID:GoodLuckBamboo，项目名称:hariboteos，代码行数:14，代码来源:bootpack.c

示例6: make_wtitle8

void make_wtitle8(unsigned char* buf, int xsize, char* title, char act)
{
    static char closebtn[7][8] = {
        "oo    oo",
        " oo  oo ",
        "  oooo  ",
        "   oo   ",
        "  oooo  ",
        " oo  oo ",
        "oo    oo",
    }; /* 仿 Windows 8 关闭按钮 */
    int x, y;
    char c;
    boxfill8(buf, xsize, act ? blue : base1, 1, 1, xsize - 2, 20);
    boxfill8(buf, xsize, act ? orange : base00, xsize - 30, 1, xsize - 2, 18);
    for (y = 0; y < 7; y++) {
        for (x = 0; x < 8; x++) {
            c = closebtn[y][x];
            if (c == 'o') {
                buf[(7 + y) * xsize + (xsize - 19 + x)] = base3;
            }
        }
    }
    putfonts8_asc(buf, xsize, (xsize - strlen(title) * FNT_W) / 2, (22 - FNT_H) / 2, base3, title);
    return;
}

开发者ID:kingfree，项目名称:haut，代码行数:26，代码来源:window.c

示例7: print_on_screen

void print_on_screen(char *msg)
{
	struct BOOTINFO *bootinfo = (struct BOOTINFO *) ADR_BOOTINFO;
	int x0 = 10, y0 = 200;
	static int invoke_count = 0;
	boxfill8(bootinfo->vram,bootinfo->scrnx, COL8_848484, x0, y0 + invoke_count * 16, x0 + strlen(msg)*8, y0 + invoke_count * 16 + 16);
	putfonts8_asc(bootinfo->vram, bootinfo->scrnx, x0, y0 + invoke_count * 16, COL8_000000, msg);	
	invoke_count++;
	
	//没有空间记录日志，则刷新日志，从头开始显示日志
	if(invoke_count == 35){
		invoke_count = 0;
		boxfill8(bootinfo->vram,bootinfo->scrnx, COL8_008484, x0, y0, x0 + 1024, y0 + 768);
		putfonts8_asc(bootinfo->vram, bootinfo->scrnx, x0, y0 + invoke_count * 16, COL8_000000, msg);
	}
}

开发者ID:jjhlzn，项目名称:haribote，代码行数:16，代码来源:utils.c

示例8: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	char s[40],mcursor[256];
	int mx, my;

	init_gdtidt();
	init_pic();
	io_sti();

	init_palette();
	init_screen8(binfo->vram, binfo->scrnx, binfo->scrny);
	mx = (binfo->scrnx - 16) / 2; 
	my = (binfo->scrny - 28 - 16) / 2;
	init_mouse_cursor8(mcursor, COL8_008484);
	putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16);
	sprintf(s, "(%d, %d)", mx, my);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, s);

	io_out8(PIC0_IMR, 0xf9);
	io_out8(PIC1_IMR, 0xef);
	
	for (;;) {
		io_hlt();
	}
}

开发者ID:SeanHAu，项目名称:OSASK，代码行数:26，代码来源:bootpack.c

示例9: bootmain

/*
void bootmain(void){
	//注意这里的函数名字为bootmain，因为在entry.S中设定的入口名字也是bootmain，两者要保持一致
	clear_screen(40);

	char *vram;
	int xsize, ysize;
	struct BOOTINFO *binfo;
	binfo=(struct BOOTINFO *)0x0ff0;
	init_screen((struct BOOTINFO*)0x0ff0);

	draw_window();

	init_palette();

	vram=(char *)0x0ff0;

	char font_A[16]={
		0x00, 0x18, 0x18, 0x18, 0x18, 0x24, 0x24, 0x24,
		0x24, 0x7e, 0x42, 0x42, 0x42, 0xe7, 0x00, 0x00
	};

	//putfont8(vram, 20, 50, 50, 'd', font_A);
	putfont8(binfo->vram binfo->xsize, 8, 8, COL8_FFFFFF, font_A);
}
*/
void bootmain(void){
	struct BOOTINFO *binfo = (struct BOOTINFO*) 0x0ff0;
	extern char hankaku[2048];
	
	init_palette();
	init_screen(binfo->vram, binfo->scrnx, binfo->scrny);

	//putfont8_asc(binfo->vram, binfo->scrnx, 8, 8, COL8_FFFFFF, "ChrisZZ");
	//putfont8_asc(binfo->vram, binfo->scrnx, 31, 31, COL8_000000, "Haribote OS");
	//putfont8_asc(binfo->vram, binfo->scrnx, 32, 32, COL8_FFFFFF, "Haribote OS");

	char s[10];
	//sprintf(s, "scrnx=%d", binfo->scrnx);
	//putfont8_asc(binfo->vram, binfo->scrnx, 16, 64, COL8_FFFFFF, s);

	char mcursor[256];
	int mx, my;
	mx = (binfo->scrnx-16)/2;
	my = (binfo->scrny-28-16)/2;
	init_mouse_cursor8(mcursor, COL8_008484);
	putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16);

	sprintf(s, "(%d, %d)", mx, my);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, s);

	while(1);
}

开发者ID:Redoblue，项目名称:osask-linux，代码行数:53，代码来源:main.c

示例10: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	/* s是输出缓冲区	mcursor存放鼠标图形 */
	char s[40], mcursor[256];
	int mx, my;

	init_gdtidt();		/* 初始化GDT, IDT */
	init_pic();			/* 初始化PIC */
	io_sti();			/* 打开所有可屏蔽中断 */

	init_palette();		/* 初始化调色板 */
	init_screen8(binfo->vram, binfo->scrnx, binfo->scrny);	/* 绘制"桌面" */
	mx = (binfo->scrnx - 16) / 2; /* 计算鼠标图形在屏幕上的位置 它在整个桌面的中心位置 */
	my = (binfo->scrny - 28 - 16) / 2;	
	init_mouse_cursor8(mcursor, COL8_008484);	
	putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16); /* 显示鼠标图形 */
	sprintf(s, "(%d, %d)", mx, my);										
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, s);		/* 输出鼠标图形左上角在屏幕上的坐标 */


	io_out8(PIC0_IMR, 0xf9); /* PIC0(11111001) (打开IRQ1键盘中断和连接从PIC的IRQ2)*/
	io_out8(PIC1_IMR, 0xef); /* PIC1(11101111) (打开PS2鼠标中断 即IRQ12)*/

	for (;;) {
		io_hlt();
	}
}

开发者ID:sllt，项目名称:longos，代码行数:28，代码来源:bootpack.c

示例11: putfonts8_asc_sht

void putfonts8_asc_sht(sheet_t* sht, int x, int y, int c, int b, char* s, int l)
{
    boxfill8(sht->buf, sht->bxsize, b, x, y, x + l * FNT_W - 1, y + FNT_H - 1);
    putfonts8_asc(sht->buf, sht->bxsize, x, y, c, s);
    sheet_refresh(sht, x, y, x + l * FNT_W, y + FNT_H);
    return;
}

开发者ID:kingfree，项目名称:haut，代码行数:7，代码来源:window.c

示例12: print_debug

void print_debug(char *str)
{
    struct BOOTINFO *binfo;
    binfo = (struct BOOTINFO *) 0xff0;
    boxfill8(binfo->vram, binfo->scrnx, COL8_008484, 0, 128, 320, 128 + 16);
    putfonts8_asc(binfo->vram, binfo->scrnx, 0, 128, COL8_FFFFFF, str);
}

开发者ID:linxiulei，项目名称:30day_create_os，代码行数:7，代码来源:debug.c

示例13: debug_print

void debug_print(int x, int y, unsigned char *s)
{
    struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	putfonts8_asc(binfo->vram, binfo->scrnx, x, y, COL8_FF0000, s);
	
	return;
}

开发者ID:aloneplayer，项目名称:30daysOS，代码行数:7，代码来源:debug.c

示例14: inthandler27

// P119 需要执行 STI
void inthandler27(int *esp)
{
    BOOTINFO_t *binfo = (BOOTINFO_t *) BOOTINFO_ENTRY;
    boxfill8(binfo->vram, binfo->scrnx, COL8_000000, 0, 0, 32 * 8 - 1, 15);
    putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, "INT 27 (IRQ-7) : None");
    io_out8(PIC0_OCW2, 0x67);
}

开发者ID:zy-sunshine，项目名称:hackos01，代码行数:8，代码来源:int.c

示例15: putfonts8_asc_sht

void putfonts8_asc_sht(struct SHEET *sht, int x, int y, int c, int b, char *s, int l)
{
    boxfill8(sht->buf, sht->bxsize, b, x, y, x + l * 8 - 1, y + 15);
    putfonts8_asc(sht->buf, sht->bxsize, x, y, c, s);
    sheet_refresh(sht, x, y, x + l * 8, y + 16);
    return;
}

开发者ID:LinuxKernelDevelopment，项目名称:30，代码行数:7，代码来源:bootpack.c

示例16: HariMain

void HariMain(void)
{
  int i;
  struct BOOTINFO *binfo = (struct BOOTINFO *)0x0ff0;
  int xsize = (*binfo).scrnx;
  int ysize = (*binfo).scrny;
  char *vram = (*binfo).vram;
  char msg[40], mcursor[256];
  const int mx = xsize/2;
  const int my = ysize/2;

  init_gdtidt ();
  init_pic ();
  io_sti ();

  init_pallete();
  init_screen (vram, xsize, ysize);

  putfonts8_asc (binfo->vram, binfo->scrnx, 8, 8, COL8_FFFFFF, "ABC 123");
  
  putfonts8_asc (binfo->vram, binfo->scrnx, 31, 31, COL8_000000, "Haribote OS.");
  putfonts8_asc (binfo->vram, binfo->scrnx, 30, 30, COL8_FFFFFF, "Haribote OS.");

  sprintf(msg, "scrnx = %d", binfo->scrnx);
  putfonts8_asc (binfo->vram, binfo->scrnx, 30, 48, COL8_FFFFFF, msg);

  init_mouse_cursor8 (mcursor, COL8_008484);
  putblock8_8 (binfo->vram, binfo->scrnx, 16, 16, mx,my, mcursor, 16);
  
  io_out8(PIC0_IMR, 0xf9); /* PIC1とキーボードを許可(11111001) */
  io_out8(PIC1_IMR, 0xef); /* マウスを許可(11101111) */
  
  for (;;) {
	io_cli();
	if (keybuf.flag == 0) {
	  io_stihlt();
	} else {
	  i = keybuf.data;
	  keybuf.flag = 0;
	  io_sti();
	  unsigned char s[4];
	  sprintf (s, "%x", i);
	  boxfill8(binfo->vram, binfo->scrnx, COL8_008484, 0, 48, 15, 31+48);
	  putfonts8_asc(binfo->vram, binfo->scrnx, 0, 48, COL8_FFFFFF, s);
	}
  }
}

开发者ID:msyksphinz，项目名称:sicp_exercise，代码行数:47，代码来源:bootpack.c

示例17: HariMain

void HariMain(void)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) 0x0ff0;
	char s[40], mcursor[256];
	int mx, my, i;

	init_gdtidt();
	init_pic();
    // Set IF (interrupt flag to 1)
    io_sti();
    
    init_palette();
	init_screen8(binfo->vram, binfo->scrnx, binfo->scrny);
	mx = (binfo->scrnx - 16) / 2; /* 画面中央になるように座標計算 */
	my = (binfo->scrny - 28 - 16) / 2;
	init_mouse_cursor8(mcursor, COL8_008484);
	putblock8_8(binfo->vram, binfo->scrnx, 16, 16, mx, my, mcursor, 16);
	sprintf(s, "(%d, %d)", mx, my);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, s);
    
    io_out8(PIC0_IMR, 0xf9); /* (11111001) Open IRQ 1 (keyboard) and IRQ 2 (connect to PIC 1)   */
	io_out8(PIC1_IMR, 0xef); /* (11101111) Open IRQ 12 */

    //--keyboard
    char keybuf[32];
    fifo8_init(&keyfifo,32, keybuf);
    init_keyboard();
	for (;;) 
    {
		io_cli();
		if (fifo8_status(&keyfifo) == 0) 
        {
			io_stihlt();
		} 
        else 
        {
         	i = fifo8_get(&keyfifo);
			io_sti();
			sprintf(s, "%02X", i);
			boxfill8(binfo->vram, binfo->scrnx, COL8_008484, 0, 16, 15, 31);
			putfonts8_asc(binfo->vram, binfo->scrnx, 0, 16, COL8_FFFFFF, s);
		}
    }
    
    
}

开发者ID:aloneplayer，项目名称:30daysOS，代码行数:46，代码来源:bootpack.c

示例18: inthandler2c

void inthandler2c(int *esp)
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	boxfill8(binfo->vram, binfo->scrnx, COL8_000000, 0, 0, 32 * 8 - 1, 15);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, "INT 2C (IRQ-12) : PS/2 mouse");
	for (;;) {
		io_hlt();
	}
}

开发者ID:GoodLuckBamboo，项目名称:hariboteos，代码行数:9，代码来源:int.c

示例19: inthandler21

void inthandler21(int *esp)
/* PS/2键盘的中断 */
{
	struct BOOTINFO *binfo = (struct BOOTINFO *) ADR_BOOTINFO;
	boxfill8(binfo->vram, binfo->scrnx, COL8_000000, 0, 0, 32 * 8 - 1, 15);
	putfonts8_asc(binfo->vram, binfo->scrnx, 0, 0, COL8_FFFFFF, "INT 21 (IRQ-1) : PS/2 keyboard");
	for (;;) {
		io_hlt();
	}
}

开发者ID:NeilJudson，项目名称:HomemadeOS，代码行数:10，代码来源:int.c

示例20: make_window8

void make_window8(unsigned char *buf, int xsize, int ysize, char *title, char act)
{
	static char closebtn[14][16] = {
		"[email protected]",
		"[email protected]",
		"[email protected]",
		"[email protected]@[email protected]@[email protected]",
		"[email protected]@[email protected]@[email protected]",
		"[email protected]@@@[email protected]",
		"[email protected]@[email protected]",
		"[email protected]@@@[email protected]",
		"[email protected]@[email protected]@[email protected]",
		"[email protected]@[email protected]@[email protected]",
		"[email protected]",
		"[email protected]",
		"[email protected]",
		"@@@@@@@@@@@@@@@@"
	};
	int x, y;
	char c, tc, tbc;
	if (act != 0) {
		tc = COL8_FFFFFF;
		tbc = COL8_000084;
	} else {
		tc = COL8_C6C6C6;
		tbc = COL8_848484;
	}
	boxfill8(buf, xsize, COL8_C6C6C6, 0,         0,         xsize - 1, 0        );
	boxfill8(buf, xsize, COL8_FFFFFF, 1,         1,         xsize - 2, 1        );
	boxfill8(buf, xsize, COL8_C6C6C6, 0,         0,         0,         ysize - 1);
	boxfill8(buf, xsize, COL8_FFFFFF, 1,         1,         1,         ysize - 2);
	boxfill8(buf, xsize, COL8_848484, xsize - 2, 1,         xsize - 2, ysize - 2);
	boxfill8(buf, xsize, COL8_000000, xsize - 1, 0,         xsize - 1, ysize - 1);
	boxfill8(buf, xsize, COL8_C6C6C6, 2,         2,         xsize - 3, ysize - 3);
	boxfill8(buf, xsize, tbc,         3,         3,         xsize - 4, 20       );
	boxfill8(buf, xsize, COL8_848484, 1,         ysize - 2, xsize - 2, ysize - 2);
	boxfill8(buf, xsize, COL8_000000, 0,         ysize - 1, xsize - 1, ysize - 1);
	putfonts8_asc(buf, xsize, 24, 4, tc, title);
	for (y = 0; y < 14; y++) {
		for (x = 0; x < 16; x++) {
			c = closebtn[y][x];
			if (c == '@') {
				c = COL8_000000;
			} else if (c == '$') {
				c = COL8_848484;
			} else if (c == 'Q') {
				c = COL8_C6C6C6;
			} else {
				c = COL8_FFFFFF;
			}
			buf[(5 + y) * xsize + (xsize - 21 + x)] = c;
		}
	}
	return;
}

开发者ID:bigpussy，项目名称:harib_os_src，代码行数:55，代码来源:bootpack.c

注：本文中的putfonts8_asc函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。