本文整理汇总了C++中put_sbits函数的典型用法代码示例。如果您正苦于以下问题：C++ put_sbits函数的具体用法？C++ put_sbits怎么用？C++ put_sbits使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了put_sbits函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rv20_encode_picture_header
void rv20_encode_picture_header(MpegEncContext *s, int picture_number){
put_bits(&s->pb, 2, s->pict_type); //I 0 vs. 1 ?
put_bits(&s->pb, 1, 0); /* unknown bit */
put_bits(&s->pb, 5, s->qscale);
put_sbits(&s->pb, 8, picture_number); //FIXME wrong, but correct is not known
s->mb_x= s->mb_y= 0;
ff_h263_encode_mba(s);
put_bits(&s->pb, 1, s->no_rounding);
assert(s->f_code == 1);
assert(s->unrestricted_mv == 1);
// assert(s->h263_aic== (s->pict_type == FF_I_TYPE));
assert(s->alt_inter_vlc == 0);
assert(s->umvplus == 0);
assert(s->modified_quant==1);
assert(s->loop_filter==1);
s->h263_aic= s->pict_type == FF_I_TYPE;
if(s->h263_aic){
s->y_dc_scale_table=
s->c_dc_scale_table= ff_aic_dc_scale_table;
}else{
s->y_dc_scale_table=
s->c_dc_scale_table= ff_mpeg1_dc_scale_table;
}
}
开发者ID:Yelinson，项目名称:OpenVideoHub，代码行数:28，代码来源:rv10.c
示例2: adx_encode
static void adx_encode(ADXContext *c, uint8_t *adx, const int16_t *wav,
ADXChannelState *prev, int channels)
{
PutBitContext pb;
int scale;
int i, j;
int s0, s1, s2, d;
int max = 0;
int min = 0;
s1 = prev->s1;
s2 = prev->s2;
for (i = 0, j = 0; j < 32; i += channels, j++) {
s0 = wav[i];
d = ((s0 << COEFF_BITS) - c->coeff[0] * s1 - c->coeff[1] * s2) >> COEFF_BITS;
if (max < d)
max = d;
if (min > d)
min = d;
s2 = s1;
s1 = s0;
}
if (max == 0 && min == 0) {
prev->s1 = s1;
prev->s2 = s2;
memset(adx, 0, BLOCK_SIZE);
return;
}
if (max / 7 > -min / 8)
scale = max / 7;
else
scale = -min / 8;
if (scale == 0)
scale = 1;
AV_WB16(adx, scale);
init_put_bits(&pb, adx + 2, 16);
s1 = prev->s1;
s2 = prev->s2;
for (i = 0, j = 0; j < 32; i += channels, j++) {
d = ((wav[i] << COEFF_BITS) - c->coeff[0] * s1 - c->coeff[1] * s2) >> COEFF_BITS;
d = av_clip(ROUNDED_DIV(d, scale), -8, 7);
put_sbits(&pb, 4, d);
s0 = ((d << COEFF_BITS) * scale + c->coeff[0] * s1 + c->coeff[1] * s2) >> COEFF_BITS;
s2 = s1;
s1 = s0;
}
prev->s1 = s1;
prev->s2 = s2;
flush_put_bits(&pb);
}
开发者ID:839687571，项目名称:ffmpeg_sln_vs2013，代码行数:60，代码来源:adxenc.c
示例3: put_line
static void put_line(uint8_t *dst, int size, int width, const int *runs)
{
PutBitContext pb;
int run, mode = ~0, pix_left = width, run_idx = 0;
init_put_bits(&pb, dst, size*8);
while(pix_left > 0){
run = runs[run_idx++];
mode = ~mode;
pix_left -= run;
for(; run > 16; run -= 16)
put_sbits(&pb, 16, mode);
if(run)
put_sbits(&pb, run, mode);
}
}
开发者ID:Anistor-info，项目名称:project1，代码行数:16，代码来源:faxcompr.c
示例4: ff_flv2_encode_ac_esc
void ff_flv2_encode_ac_esc(PutBitContext *pb, int slevel, int level, int run, int last){
if(level < 64) { // 7-bit level
put_bits(pb, 1, 0);
put_bits(pb, 1, last);
put_bits(pb, 6, run);
put_sbits(pb, 7, slevel);
} else {
/* 11-bit level */
put_bits(pb, 1, 1);
put_bits(pb, 1, last);
put_bits(pb, 6, run);
put_sbits(pb, 11, slevel);
}
}
开发者ID:josephwecker，项目名称:FFmpeg，代码行数:16，代码来源:flvenc.c
示例5: put_subframe_samples
static void put_subframe_samples(DCAEncContext *c, int ss, int band, int ch)
{
int i, j, sum, bits, sel;
if (c->abits[ch][band] <= DCA_CODE_BOOKS) {
av_assert0(c->abits[ch][band] > 0);
sel = c->quant_index_sel[ch][c->abits[ch][band] - 1];
// Huffman codes
if (sel < ff_dca_quant_index_group_size[c->abits[ch][band] - 1]) {
ff_dca_vlc_enc_quant(&c->pb, &c->quantized[ch][band][ss * 8], 8, sel, c->abits[ch][band] - 1);
return;
}
// Block codes
if (c->abits[ch][band] <= 7) {
for (i = 0; i < 8; i += 4) {
sum = 0;
for (j = 3; j >= 0; j--) {
sum *= ff_dca_quant_levels[c->abits[ch][band]];
sum += c->quantized[ch][band][ss * 8 + i + j];
sum += (ff_dca_quant_levels[c->abits[ch][band]] - 1) / 2;
}
put_bits(&c->pb, bit_consumption[c->abits[ch][band]] / 4, sum);
}
return;
}
}
for (i = 0; i < 8; i++) {
bits = bit_consumption[c->abits[ch][band]] / 16;
put_sbits(&c->pb, bits, c->quantized[ch][band][ss * 8 + i]);
}
}
开发者ID:Bilibili，项目名称:FFmpeg，代码行数:32，代码来源:dcaenc.c
示例6: encode_block
static void encode_block(MpegEncContext *s, int16_t *block, int n)
{
int mant, nbits, code, i, j;
int component, dc, run, last_index, val;
MJpegContext *m = s->mjpeg_ctx;
uint8_t *huff_size_ac;
uint16_t *huff_code_ac;
/* DC coef */
component = (n <= 3 ? 0 : (n&1) + 1);
dc = block[0]; /* overflow is impossible */
val = dc - s->last_dc[component];
if (n < 4) {
ff_mjpeg_encode_dc(&s->pb, val, m->huff_size_dc_luminance, m->huff_code_dc_luminance);
huff_size_ac = m->huff_size_ac_luminance;
huff_code_ac = m->huff_code_ac_luminance;
} else {
ff_mjpeg_encode_dc(&s->pb, val, m->huff_size_dc_chrominance, m->huff_code_dc_chrominance);
huff_size_ac = m->huff_size_ac_chrominance;
huff_code_ac = m->huff_code_ac_chrominance;
}
s->last_dc[component] = dc;
/* AC coefs */
run = 0;
last_index = s->block_last_index[n];
for(i=1;i<=last_index;i++) {
j = s->intra_scantable.permutated[i];
val = block[j];
if (val == 0) {
run++;
} else {
while (run >= 16) {
put_bits(&s->pb, huff_size_ac[0xf0], huff_code_ac[0xf0]);
run -= 16;
}
mant = val;
if (val < 0) {
val = -val;
mant--;
}
nbits= av_log2_16bit(val) + 1;
code = (run << 4) | nbits;
put_bits(&s->pb, huff_size_ac[code], huff_code_ac[code]);
put_sbits(&s->pb, nbits, mant);
run = 0;
}
}
/* output EOB only if not already 64 values */
if (last_index < 63 || run != 0)
put_bits(&s->pb, huff_size_ac[0], huff_code_ac[0]);
}
开发者ID:Brainiarc7，项目名称:ffmpeg-nvenc-magic，代码行数:57，代码来源:mjpegenc.c
示例7: put_subframe_samples
static void put_subframe_samples(DCAEncContext *c, int ss, int band, int ch)
{
if (c->abits[band][ch] <= 7) {
int sum, i, j;
for (i = 0; i < 8; i += 4) {
sum = 0;
for (j = 3; j >= 0; j--) {
sum *= quant_levels[c->abits[band][ch]];
sum += c->quantized[ss * 8 + i + j][band][ch];
sum += (quant_levels[c->abits[band][ch]] - 1) / 2;
}
put_bits(&c->pb, bit_consumption[c->abits[band][ch]] / 4, sum);
}
} else {
int i;
for (i = 0; i < 8; i++) {
int bits = bit_consumption[c->abits[band][ch]] / 16;
put_sbits(&c->pb, bits, c->quantized[ss * 8 + i][band][ch]);
}
}
}
开发者ID:0day-ci，项目名称:FFmpeg，代码行数:21，代码来源:dcaenc.c
示例8: mpeg1_encode_sequence_header
/* put sequence header if needed */
static void mpeg1_encode_sequence_header(MpegEncContext *s)
{
unsigned int vbv_buffer_size;
unsigned int fps, v;
int i;
uint64_t time_code;
float best_aspect_error= 1E10;
float aspect_ratio= av_q2d(s->avctx->sample_aspect_ratio);
int constraint_parameter_flag;
if(aspect_ratio==0.0) aspect_ratio= 1.0; //pixel aspect 1:1 (VGA)
if (s->current_picture.f.key_frame) {
AVRational framerate= avpriv_frame_rate_tab[s->frame_rate_index];
/* mpeg1 header repeated every gop */
put_header(s, SEQ_START_CODE);
put_sbits(&s->pb, 12, s->width );
put_sbits(&s->pb, 12, s->height);
for(i=1; i<15; i++){
float error= aspect_ratio;
if(s->codec_id == CODEC_ID_MPEG1VIDEO || i <=1)
error-= 1.0/ff_mpeg1_aspect[i];
else
error-= av_q2d(ff_mpeg2_aspect[i])*s->height/s->width;
error= FFABS(error);
if(error < best_aspect_error){
best_aspect_error= error;
s->aspect_ratio_info= i;
}
}
put_bits(&s->pb, 4, s->aspect_ratio_info);
put_bits(&s->pb, 4, s->frame_rate_index);
if(s->avctx->rc_max_rate){
v = (s->avctx->rc_max_rate + 399) / 400;
if (v > 0x3ffff && s->codec_id == CODEC_ID_MPEG1VIDEO)
v = 0x3ffff;
}else{
v= 0x3FFFF;
}
if(s->avctx->rc_buffer_size)
vbv_buffer_size = s->avctx->rc_buffer_size;
else
/* VBV calculation: Scaled so that a VCD has the proper VBV size of 40 kilobytes */
vbv_buffer_size = (( 20 * s->bit_rate) / (1151929 / 2)) * 8 * 1024;
vbv_buffer_size= (vbv_buffer_size + 16383) / 16384;
put_sbits(&s->pb, 18, v);
put_bits(&s->pb, 1, 1); /* marker */
put_sbits(&s->pb, 10, vbv_buffer_size);
constraint_parameter_flag=
s->width <= 768 && s->height <= 576 &&
s->mb_width * s->mb_height <= 396 &&
s->mb_width * s->mb_height * framerate.num <= framerate.den*396*25 &&
framerate.num <= framerate.den*30 &&
s->avctx->me_range && s->avctx->me_range < 128 &&
vbv_buffer_size <= 20 &&
v <= 1856000/400 &&
s->codec_id == CODEC_ID_MPEG1VIDEO;
put_bits(&s->pb, 1, constraint_parameter_flag);
ff_write_quant_matrix(&s->pb, s->avctx->intra_matrix);
ff_write_quant_matrix(&s->pb, s->avctx->inter_matrix);
if(s->codec_id == CODEC_ID_MPEG2VIDEO){
put_header(s, EXT_START_CODE);
put_bits(&s->pb, 4, 1); //seq ext
put_bits(&s->pb, 1, s->avctx->profile == 0); //escx 1 for 4:2:2 profile */
put_bits(&s->pb, 3, s->avctx->profile); //profile
put_bits(&s->pb, 4, s->avctx->level); //level
put_bits(&s->pb, 1, s->progressive_sequence);
put_bits(&s->pb, 2, s->chroma_format);
put_bits(&s->pb, 2, s->width >>12);
put_bits(&s->pb, 2, s->height>>12);
put_bits(&s->pb, 12, v>>18); //bitrate ext
put_bits(&s->pb, 1, 1); //marker
put_bits(&s->pb, 8, vbv_buffer_size >>10); //vbv buffer ext
put_bits(&s->pb, 1, s->low_delay);
put_bits(&s->pb, 2, 0); // frame_rate_ext_n
put_bits(&s->pb, 5, 0); // frame_rate_ext_d
}
开发者ID:9aa5，项目名称:FFmpeg，代码行数:94，代码来源:mpeg12enc.c
示例9: put_header
static void put_header(MpegEncContext *s, int header)
{
avpriv_align_put_bits(&s->pb);
put_bits(&s->pb, 16, header>>16);
put_sbits(&s->pb, 16, header);
}
开发者ID:9aa5，项目名称:FFmpeg，代码行数:6，代码来源:mpeg12enc.c
示例10: ff_h263_encode_picture_header
void ff_h263_encode_picture_header(MpegEncContext * s, int picture_number)
{
int format, coded_frame_rate, coded_frame_rate_base, i, temp_ref;
int best_clock_code=1;
int best_divisor=60;
int best_error= INT_MAX;
if(s->h263_plus){
for(i=0; i<2; i++){
int div, error;
div= (s->avctx->time_base.num*1800000LL + 500LL*s->avctx->time_base.den) / ((1000LL+i)*s->avctx->time_base.den);
div= av_clip(div, 1, 127);
error= FFABS(s->avctx->time_base.num*1800000LL - (1000LL+i)*s->avctx->time_base.den*div);
if(error < best_error){
best_error= error;
best_divisor= div;
best_clock_code= i;
}
}
}
s->custom_pcf= best_clock_code!=1 || best_divisor!=60;
coded_frame_rate= 1800000;
coded_frame_rate_base= (1000+best_clock_code)*best_divisor;
avpriv_align_put_bits(&s->pb);
/* Update the pointer to last GOB */
s->ptr_lastgob = put_bits_ptr(&s->pb);
put_bits(&s->pb, 22, 0x20); /* PSC */
temp_ref= s->picture_number * (int64_t)coded_frame_rate * s->avctx->time_base.num / //FIXME use timestamp
(coded_frame_rate_base * (int64_t)s->avctx->time_base.den);
put_sbits(&s->pb, 8, temp_ref); /* TemporalReference */
put_bits(&s->pb, 1, 1); /* marker */
put_bits(&s->pb, 1, 0); /* h263 id */
put_bits(&s->pb, 1, 0); /* split screen off */
put_bits(&s->pb, 1, 0); /* camera off */
put_bits(&s->pb, 1, 0); /* freeze picture release off */
format = ff_match_2uint16(ff_h263_format, FF_ARRAY_ELEMS(ff_h263_format), s->width, s->height);
if (!s->h263_plus) {
/* H.263v1 */
put_bits(&s->pb, 3, format);
put_bits(&s->pb, 1, (s->pict_type == AV_PICTURE_TYPE_P));
/* By now UMV IS DISABLED ON H.263v1, since the restrictions
of H.263v1 UMV implies to check the predicted MV after
calculation of the current MB to see if we're on the limits */
put_bits(&s->pb, 1, 0); /* Unrestricted Motion Vector: off */
put_bits(&s->pb, 1, 0); /* SAC: off */
put_bits(&s->pb, 1, s->obmc); /* Advanced Prediction */
put_bits(&s->pb, 1, 0); /* only I/P frames, no PB frame */
put_bits(&s->pb, 5, s->qscale);
put_bits(&s->pb, 1, 0); /* Continuous Presence Multipoint mode: off */
} else {
int ufep=1;
/* H.263v2 */
/* H.263 Plus PTYPE */
put_bits(&s->pb, 3, 7);
put_bits(&s->pb,3,ufep); /* Update Full Extended PTYPE */
if (format == 8)
put_bits(&s->pb,3,6); /* Custom Source Format */
else
put_bits(&s->pb, 3, format);
put_bits(&s->pb,1, s->custom_pcf);
put_bits(&s->pb,1, s->umvplus); /* Unrestricted Motion Vector */
put_bits(&s->pb,1,0); /* SAC: off */
put_bits(&s->pb,1,s->obmc); /* Advanced Prediction Mode */
put_bits(&s->pb,1,s->h263_aic); /* Advanced Intra Coding */
put_bits(&s->pb,1,s->loop_filter); /* Deblocking Filter */
put_bits(&s->pb,1,s->h263_slice_structured); /* Slice Structured */
put_bits(&s->pb,1,0); /* Reference Picture Selection: off */
put_bits(&s->pb,1,0); /* Independent Segment Decoding: off */
put_bits(&s->pb,1,s->alt_inter_vlc); /* Alternative Inter VLC */
put_bits(&s->pb,1,s->modified_quant); /* Modified Quantization: */
put_bits(&s->pb,1,1); /* "1" to prevent start code emulation */
put_bits(&s->pb,3,0); /* Reserved */
put_bits(&s->pb, 3, s->pict_type == AV_PICTURE_TYPE_P);
put_bits(&s->pb,1,0); /* Reference Picture Resampling: off */
put_bits(&s->pb,1,0); /* Reduced-Resolution Update: off */
put_bits(&s->pb,1,s->no_rounding); /* Rounding Type */
put_bits(&s->pb,2,0); /* Reserved */
put_bits(&s->pb,1,1); /* "1" to prevent start code emulation */
/* This should be here if PLUSPTYPE */
put_bits(&s->pb, 1, 0); /* Continuous Presence Multipoint mode: off */
if (format == 8) {
/* Custom Picture Format (CPFMT) */
s->aspect_ratio_info= ff_h263_aspect_to_info(s->avctx->sample_aspect_ratio);
put_bits(&s->pb,4,s->aspect_ratio_info);
put_bits(&s->pb,9,(s->width >> 2) - 1);
put_bits(&s->pb,1,1); /* "1" to prevent start code emulation */
put_bits(&s->pb,9,(s->height >> 2));
if (s->aspect_ratio_info == FF_ASPECT_EXTENDED){
put_bits(&s->pb, 8, s->avctx->sample_aspect_ratio.num);
//.........这里部分代码省略.........
开发者ID:xkfz007，项目名称:libav，代码行数:101，代码来源:ituh263enc.c
示例11: mpeg1_encode_sequence_header
/* put sequence header if needed */
static void mpeg1_encode_sequence_header(MpegEncContext *s)
{
unsigned int vbv_buffer_size, fps, v;
int i, constraint_parameter_flag;
uint64_t time_code;
int64_t best_aspect_error = INT64_MAX;
AVRational aspect_ratio = s->avctx->sample_aspect_ratio;
if (aspect_ratio.num == 0 || aspect_ratio.den == 0)
aspect_ratio = (AVRational){1,1}; // pixel aspect 1.1 (VGA)
if (s->current_picture.f->key_frame) {
AVRational framerate = ff_mpeg12_frame_rate_tab[s->frame_rate_index];
/* mpeg1 header repeated every gop */
put_header(s, SEQ_START_CODE);
put_sbits(&s->pb, 12, s->width & 0xFFF);
put_sbits(&s->pb, 12, s->height & 0xFFF);
for (i = 1; i < 15; i++) {
int64_t error = aspect_ratio.num * (1LL<<32) / aspect_ratio.den;
if (s->codec_id == AV_CODEC_ID_MPEG1VIDEO || i <= 1)
error -= (1LL<<32) / ff_mpeg1_aspect[i];
else
error -= (1LL<<32)*ff_mpeg2_aspect[i].num * s->height / s->width / ff_mpeg2_aspect[i].den;
error = FFABS(error);
if (error - 2 <= best_aspect_error) {
best_aspect_error = error;
s->aspect_ratio_info = i;
}
}
put_bits(&s->pb, 4, s->aspect_ratio_info);
put_bits(&s->pb, 4, s->frame_rate_index);
if (s->avctx->rc_max_rate) {
v = (s->avctx->rc_max_rate + 399) / 400;
if (v > 0x3ffff && s->codec_id == AV_CODEC_ID_MPEG1VIDEO)
v = 0x3ffff;
} else {
v = 0x3FFFF;
}
if (s->avctx->rc_buffer_size)
vbv_buffer_size = s->avctx->rc_buffer_size;
else
/* VBV calculation: Scaled so that a VCD has the proper
* VBV size of 40 kilobytes */
vbv_buffer_size = ((20 * s->bit_rate) / (1151929 / 2)) * 8 * 1024;
vbv_buffer_size = (vbv_buffer_size + 16383) / 16384;
put_sbits(&s->pb, 18, v);
put_bits(&s->pb, 1, 1); // marker
put_sbits(&s->pb, 10, vbv_buffer_size);
constraint_parameter_flag =
s->width <= 768 &&
s->height <= 576 &&
s->mb_width * s->mb_height <= 396 &&
s->mb_width * s->mb_height * framerate.num <= 396 * 25 * framerate.den &&
framerate.num <= framerate.den * 30 &&
s->avctx->me_range &&
s->avctx->me_range < 128 &&
vbv_buffer_size <= 20 &&
v <= 1856000 / 400 &&
s->codec_id == AV_CODEC_ID_MPEG1VIDEO;
put_bits(&s->pb, 1, constraint_parameter_flag);
ff_write_quant_matrix(&s->pb, s->avctx->intra_matrix);
ff_write_quant_matrix(&s->pb, s->avctx->inter_matrix);
if (s->codec_id == AV_CODEC_ID_MPEG2VIDEO) {
AVFrameSideData *side_data;
int width = s->width;
int height = s->height;
int use_seq_disp_ext;
put_header(s, EXT_START_CODE);
put_bits(&s->pb, 4, 1); // seq ext
put_bits(&s->pb, 1, s->avctx->profile == 0); // escx 1 for 4:2:2 profile
put_bits(&s->pb, 3, s->avctx->profile); // profile
put_bits(&s->pb, 4, s->avctx->level); // level
put_bits(&s->pb, 1, s->progressive_sequence);
put_bits(&s->pb, 2, s->chroma_format);
put_bits(&s->pb, 2, s->width >> 12);
put_bits(&s->pb, 2, s->height >> 12);
put_bits(&s->pb, 12, v >> 18); // bitrate ext
put_bits(&s->pb, 1, 1); // marker
put_bits(&s->pb, 8, vbv_buffer_size >> 10); // vbv buffer ext
put_bits(&s->pb, 1, s->low_delay);
put_bits(&s->pb, 2, s->mpeg2_frame_rate_ext.num-1); // frame_rate_ext_n
put_bits(&s->pb, 5, s->mpeg2_frame_rate_ext.den-1); // frame_rate_ext_d
//.........这里部分代码省略.........
开发者ID:309746069，项目名称:FFmpeg，代码行数:101，代码来源:mpeg12enc.c
示例12: mpeg1_encode_sequence_header
/* put sequence header if needed */
static void mpeg1_encode_sequence_header(MpegEncContext *s)
{
unsigned int vbv_buffer_size;
unsigned int fps, v;
uint64_t time_code;
int constraint_parameter_flag;
if (s->current_picture.f.key_frame) {
AVRational framerate= ff_frame_rate_tab[s->frame_rate_index];
/* mpeg1 header repeated every gop */
put_header(s, SEQ_START_CODE);
put_sbits(&s->pb, 12, s->width );
put_sbits(&s->pb, 12, s->height);
put_bits(&s->pb, 4, s->aspect_ratio_info);
put_bits(&s->pb, 4, s->frame_rate_index);
if(s->avctx->rc_max_rate){
v = (s->avctx->rc_max_rate + 399) / 400;
if (v > 0x3ffff && s->codec_id == CODEC_ID_MPEG1VIDEO)
v = 0x3ffff;
}else{
v= 0x3FFFF;
}
if(s->avctx->rc_buffer_size)
vbv_buffer_size = s->avctx->rc_buffer_size;
else
/* VBV calculation: Scaled so that a VCD has the proper VBV size of 40 kilobytes */
vbv_buffer_size = (( 20 * s->bit_rate) / (1151929 / 2)) * 8 * 1024;
vbv_buffer_size= (vbv_buffer_size + 16383) / 16384;
put_sbits(&s->pb, 18, v);
put_bits(&s->pb, 1, 1); /* marker */
put_sbits(&s->pb, 10, vbv_buffer_size);
constraint_parameter_flag=
s->width <= 768 && s->height <= 576 &&
s->mb_width * s->mb_height <= 396 &&
s->mb_width * s->mb_height * framerate.num <= framerate.den*396*25 &&
framerate.num <= framerate.den*30 &&
s->avctx->me_range && s->avctx->me_range < 128 &&
vbv_buffer_size <= 20 &&
v <= 1856000/400 &&
s->codec_id == CODEC_ID_MPEG1VIDEO;
put_bits(&s->pb, 1, constraint_parameter_flag);
ff_write_quant_matrix(&s->pb, s->avctx->intra_matrix);
ff_write_quant_matrix(&s->pb, s->avctx->inter_matrix);
if(s->codec_id == CODEC_ID_MPEG2VIDEO){
put_header(s, EXT_START_CODE);
put_bits(&s->pb, 4, 1); //seq ext
put_bits(&s->pb, 1, s->avctx->profile == 0); //escx 1 for 4:2:2 profile */
put_bits(&s->pb, 3, s->avctx->profile); //profile
put_bits(&s->pb, 4, s->avctx->level); //level
put_bits(&s->pb, 1, s->progressive_sequence);
put_bits(&s->pb, 2, s->chroma_format);
put_bits(&s->pb, 2, s->width >>12);
put_bits(&s->pb, 2, s->height>>12);
put_bits(&s->pb, 12, v>>18); //bitrate ext
put_bits(&s->pb, 1, 1); //marker
put_bits(&s->pb, 8, vbv_buffer_size >>10); //vbv buffer ext
put_bits(&s->pb, 1, s->low_delay);
put_bits(&s->pb, 2, 0); // frame_rate_ext_n
put_bits(&s->pb, 5, 0); // frame_rate_ext_d
if (s->avctx->color_primaries != AVCOL_PRI_UNSPECIFIED) {
put_header(s, EXT_START_CODE);
put_bits(&s->pb, 4, 2); //seq display ext
put_bits(&s->pb, 3, 0); //video_format, set to component
put_bits(&s->pb, 1, 1); //colour_description
put_bits(&s->pb, 8, s->avctx->color_primaries); //colour_primaries
put_bits(&s->pb, 8, s->avctx->color_transfer); //transfer_characteristics
put_bits(&s->pb, 8, s->avctx->color_matrix); //matrix_coefficients
put_bits(&s->pb, 14, s->width);
put_bits(&s->pb, 1, 1);
put_bits(&s->pb, 14, s->height);
put_bits(&s->pb, 1, 0);
}
}
开发者ID:jfuentesbrevity，项目名称:ffmbc，代码行数:88，代码来源:mpeg12enc.c
示例13: quantize_and_encode_band_cost_template
/**
* Calculate rate distortion cost for quantizing with given codebook
*
* @return quantization distortion
*/
static av_always_inline float quantize_and_encode_band_cost_template(
struct AACEncContext *s,
PutBitContext *pb, const float *in,
const float *scaled, int size, int scale_idx,
int cb, const float lambda, const float uplim,
int *bits, int BT_ZERO, int BT_UNSIGNED,
int BT_PAIR, int BT_ESC, int BT_NOISE, int BT_STEREO)
{
const int q_idx = POW_SF2_ZERO - scale_idx + SCALE_ONE_POS - SCALE_DIV_512;
const float Q = ff_aac_pow2sf_tab [q_idx];
const float Q34 = ff_aac_pow34sf_tab[q_idx];
const float IQ = ff_aac_pow2sf_tab [POW_SF2_ZERO + scale_idx - SCALE_ONE_POS + SCALE_DIV_512];
const float CLIPPED_ESCAPE = 165140.0f*IQ;
int i, j;
float cost = 0;
const int dim = BT_PAIR ? 2 : 4;
int resbits = 0;
int off;
if (BT_ZERO || BT_NOISE || BT_STEREO) {
for (i = 0; i < size; i++)
cost += in[i]*in[i];
if (bits)
*bits = 0;
return cost * lambda;
}
if (!scaled) {
abs_pow34_v(s->scoefs, in, size);
scaled = s->scoefs;
}
quantize_bands(s->qcoefs, in, scaled, size, Q34, !BT_UNSIGNED, aac_cb_maxval[cb]);
if (BT_UNSIGNED) {
off = 0;
} else {
off = aac_cb_maxval[cb];
}
for (i = 0; i < size; i += dim) {
const float *vec;
int *quants = s->qcoefs + i;
int curidx = 0;
int curbits;
float rd = 0.0f;
for (j = 0; j < dim; j++) {
curidx *= aac_cb_range[cb];
curidx += quants[j] + off;
}
curbits = ff_aac_spectral_bits[cb-1][curidx];
vec = &ff_aac_codebook_vectors[cb-1][curidx*dim];
if (BT_UNSIGNED) {
for (j = 0; j < dim; j++) {
float t = fabsf(in[i+j]);
float di;
if (BT_ESC && vec[j] == 64.0f) { //FIXME: slow
if (t >= CLIPPED_ESCAPE) {
di = t - CLIPPED_ESCAPE;
curbits += 21;
} else {
int c = av_clip_uintp2(quant(t, Q), 13);
di = t - c*cbrtf(c)*IQ;
curbits += av_log2(c)*2 - 4 + 1;
}
} else {
di = t - vec[j]*IQ;
}
if (vec[j] != 0.0f)
curbits++;
rd += di*di;
}
} else {
for (j = 0; j < dim; j++) {
float di = in[i+j] - vec[j]*IQ;
rd += di*di;
}
}
cost += rd * lambda + curbits;
resbits += curbits;
if (cost >= uplim)
return uplim;
if (pb) {
put_bits(pb, ff_aac_spectral_bits[cb-1][curidx], ff_aac_spectral_codes[cb-1][curidx]);
if (BT_UNSIGNED)
for (j = 0; j < dim; j++)
if (ff_aac_codebook_vectors[cb-1][curidx*dim+j] != 0.0f)
put_bits(pb, 1, in[i+j] < 0.0f);
if (BT_ESC) {
for (j = 0; j < 2; j++) {
if (ff_aac_codebook_vectors[cb-1][curidx*2+j] == 64.0f) {
int coef = av_clip_uintp2(quant(fabsf(in[i+j]), Q), 13);
int len = av_log2(coef);
put_bits(pb, len - 4 + 1, (1 << (len - 4 + 1)) - 2);
put_sbits(pb, len, coef);
}
}
}
//.........这里部分代码省略.........
开发者ID:amersons，项目名称:FFmpeg，代码行数:101，代码来源:aaccoder.c
注：本文中的put_sbits函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论