C++ put_format函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中put_format函数的典型用法代码示例。如果您正苦于以下问题：C++ put_format函数的具体用法？C++ put_format怎么用？C++ put_format使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了put_format函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: save_cylinder_info

static void save_cylinder_info(struct membuffer *b, struct dive *dive)
{
	int i, nr;

	nr = nr_cylinders(dive);
	for (i = 0; i < nr; i++) {
		cylinder_t *cylinder = dive->cylinder + i;
		int volume = cylinder->type.size.mliter;
		const char *description = cylinder->type.description;
		int o2 = cylinder->gasmix.o2.permille;
		int he = cylinder->gasmix.he.permille;

		put_string(b, "cylinder");
		if (volume)
			put_milli(b, " vol=", volume, "l");
		put_pressure(b, cylinder->type.workingpressure, " workpressure=", "bar");
		show_utf8(b, " description=", description, "");
		strip_mb(b);
		if (o2) {
			put_format(b, " o2=%u.%u%%", FRACTION(o2, 10));
			if (he)
				put_format(b, " he=%u.%u%%", FRACTION(he, 10));
		}
		put_pressure(b, cylinder->start, " start=", "bar");
		put_pressure(b, cylinder->end, " end=", "bar");
		put_string(b, "\n");
	}
}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:28，代码来源:save-git.c

示例2: save_one_device

static void save_one_device(void *_f, const char *model, uint32_t deviceid,
			    const char *nickname, const char *serial_nr, const char *firmware)
{
	struct membuffer *b = _f;

	/* Nicknames that are empty or the same as the device model are not interesting */
	if (nickname) {
		if (!*nickname || !strcmp(model, nickname))
			nickname = NULL;
	}

	/* Serial numbers that are empty are not interesting */
	if (serial_nr && !*serial_nr)
		serial_nr = NULL;

	/* Firmware strings that are empty are not interesting */
	if (firmware && !*firmware)
		firmware = NULL;

	/* Do we have anything interesting about this dive computer to save? */
	if (!serial_nr && !nickname && !firmware)
		return;

	put_format(b, "<divecomputerid");
	show_utf8(b, model, " model='", "'", 1);
	put_format(b, " deviceid='%08x'", deviceid);
	show_utf8(b, serial_nr, " serial='", "'", 1);
	show_utf8(b, firmware, " firmware='", "'", 1);
	show_utf8(b, nickname, " nickname='", "'", 1);
	put_format(b, "/>\n");
}

开发者ID:pidancier，项目名称:subsurface，代码行数:31，代码来源:save-xml.c

示例3: show_utf8

static void show_utf8(struct membuffer *b, const char *prefix, const char *value, const char *postfix)
{
	if (value) {
		put_format(b, "%s\"", prefix);
		quote(b, value);
		put_format(b, "\"%s", postfix);
	}
}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:8，代码来源:save-git.c

示例4: save_one_event

static void save_one_event(struct membuffer *b, struct event *ev)
{
	put_format(b, "  <event time='%d:%02d min'", FRACTION(ev->time.seconds, 60));
	show_index(b, ev->type, "type='", "'");
	show_index(b, ev->flags, "flags='", "'");
	show_index(b, ev->value, "value='", "'");
	show_utf8(b, ev->name, " name='", "'", 1);
	put_format(b, " />\n");
}

开发者ID:joscandreu，项目名称:subsurface，代码行数:9，代码来源:save-xml.c

示例5: put_gasmix

static void put_gasmix(struct membuffer *b, struct gasmix *mix)
{
	int o2 = mix->o2.permille;
	int he = mix->he.permille;

	if (o2) {
		put_format(b, " o2='%u.%u%%'", FRACTION(o2, 10));
		if (he)
			put_format(b, " he='%u.%u%%'", FRACTION(he, 10));
	}
}

开发者ID:pidancier，项目名称:subsurface，代码行数:11，代码来源:save-xml.c

示例6: show_date

static void show_date(struct membuffer *b, timestamp_t when)
{
	struct tm tm;

	utc_mkdate(when, &tm);

	put_format(b, "date %04u-%02u-%02u\n",
		   tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
	put_format(b, "time %02u:%02u:%02u\n",
		   tm.tm_hour, tm.tm_min, tm.tm_sec);
}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:11，代码来源:save-git.c

示例7: create_dive_name

/*
 * The name of a dive is the date and the dive number (and possibly
 * the uniqueness suffix).
 *
 * Note that the time of the dive may not be the same as the
 * time of the directory structure it is created in: the dive
 * might be part of a trip that straddles a month (or even a
 * year).
 *
 * We do *not* want to use localized weekdays and cause peoples save
 * formats to depend on their locale.
 */
static void create_dive_name(struct dive *dive, struct membuffer *name, struct tm *dirtm)
{
	struct tm tm;
	static const char weekday[7][4] = { "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" };

	utc_mkdate(dive->when, &tm);
	if (tm.tm_year != dirtm->tm_year)
		put_format(name, "%04u-", tm.tm_year + 1900);
	if (tm.tm_mon != dirtm->tm_mon)
		put_format(name, "%02u-", tm.tm_mon+1);

	put_format(name, "%02u-%s-%02u:%02u:%02u",
		tm.tm_mday, weekday[tm.tm_wday],
		tm.tm_hour, tm.tm_min, tm.tm_sec);
}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:27，代码来源:save-git.c

示例8: save_dives_buffer

void save_dives_buffer(struct membuffer *b, const bool select_only)
{
	int i;
	struct dive *dive;
	dive_trip_t *trip;

	put_format(b, "<divelog program='subsurface' version='%d'>\n<settings>\n", VERSION);

	if (prefs.save_userid_local)
		put_format(b, "  <userid>%s</userid>\n", prefs.userid);

	/* save the dive computer nicknames, if any */
	call_for_each_dc(b, save_one_device);
	if (autogroup)
		put_format(b, "  <autogroup state='1' />\n");
	put_format(b, "</settings>\n<dives>\n");

	for (trip = dive_trip_list; trip != NULL; trip = trip->next)
		trip->index = 0;

	/* save the dives */
	for_each_dive(i, dive) {
		if (select_only) {

			if (!dive->selected)
				continue;
			save_one_dive(b, dive);

		} else {
			trip = dive->divetrip;

			/* Bare dive without a trip? */
			if (!trip) {
				save_one_dive(b, dive);
				continue;
			}

			/* Have we already seen this trip (and thus saved this dive?) */
			if (trip->index)
				continue;

			/* We haven't seen this trip before - save it and all dives */
			trip->index = 1;
			save_trip(b, trip);
		}
	}
	put_format(b, "</dives>\n</divelog>\n");
}

开发者ID:joscandreu，项目名称:subsurface，代码行数:48，代码来源:save-xml.c

示例9: put_milli

void put_milli(struct membuffer *b, const char *pre, int value, const char *post)
{
	int i;
	char buf[4];
	const char *sign = "";
	unsigned v;

	v = value;
	if (value < 0) {
		sign = "-";
		v = -value;
	}
	for (i = 2; i >= 0; i--) {
		buf[i] = (v % 10) + '0';
		v /= 10;
	}
	buf[3] = 0;
	if (buf[2] == '0') {
		buf[2] = 0;
		if (buf[1] == '0')
			buf[1] = 0;
	}

	put_format(b, "%s%s%u.%s%s", pre, sign, v, buf, post);
}

开发者ID:codigoda，项目名称:subsurface，代码行数:25，代码来源:membuffer.c

示例10: create_trip_name

static void create_trip_name(dive_trip_t *trip, struct membuffer *name, struct tm *tm)
{
	put_format(name, "%02u-", tm->tm_mday);
	if (trip->location) {
		char ascii_loc[MAXTRIPNAME+1], *p = trip->location;
		int i;

		for (i = 0; i < MAXTRIPNAME; ) {
			char c = *p++;
			switch (c) {
			case 0:
			case ',':
			case '.':
				break;

			case 'a' ... 'z':
			case 'A' ... 'Z':
				ascii_loc[i++] = c;
				continue;
			default:
				continue;
			}
			break;
		}
		if (i > 1) {
			put_bytes(name, ascii_loc, i);
			return;
		}
	}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:29，代码来源:save-git.c

示例11: save_one_event

static void save_one_event(struct membuffer *b, struct event *ev)
{
	put_format(b, "  <event time='%d:%02d min'", FRACTION(ev->time.seconds, 60));
	show_index(b, ev->type, "type='", "'");
	show_index(b, ev->flags, "flags='", "'");
	show_index(b, ev->value, "value='", "'");
	show_utf8(b, ev->name, " name='", "'", 1);
	if (event_is_gaschange(ev)) {
		if (ev->gas.index >= 0) {
			show_index(b, ev->gas.index, "cylinder='", "'");
			put_gasmix(b, &ev->gas.mix);
		} else if (!event_gasmix_redundant(ev))
			put_gasmix(b, &ev->gas.mix);
	}
	put_format(b, " />\n");
}

开发者ID:pidancier，项目名称:subsurface，代码行数:16，代码来源:save-xml.c

示例12: save_weightsystem_info

static void save_weightsystem_info(struct membuffer *b, struct dive *dive)
{
	int i, nr;

	nr = nr_weightsystems(dive);

	for (i = 0; i < nr; i++) {
		weightsystem_t *ws = dive->weightsystem + i;
		int grams = ws->weight.grams;
		const char *description = ws->description;

		put_format(b, "  <weightsystem");
		put_milli(b, " weight='", grams, " kg'");
		show_utf8(b, description, " description='", "'", 1);
		put_format(b, " />\n");
	}
}

开发者ID:pidancier，项目名称:subsurface，代码行数:17，代码来源:save-xml.c

示例13: put_duration

int put_duration(struct membuffer *b, duration_t duration, const char *pre, const char *post)
{
	if (!duration.seconds)
		return 0;

	put_format(b, "%s%u:%02u%s", pre, FRACTION(duration.seconds, 60), post);
	return 1;
}

开发者ID:danilocesar，项目名称:subsurface，代码行数:8，代码来源:membuffer.c

示例14: put_salinity

int put_salinity(struct membuffer *b, int salinity, const char *pre, const char *post)
{
	if (!salinity)
		return 0;

	put_format(b, "%s%d%s", pre, salinity / 10, post);
	return 1;
}

开发者ID:danilocesar，项目名称:subsurface，代码行数:8，代码来源:membuffer.c

示例15: writeMarkers

void writeMarkers(struct membuffer *b, const bool selected_only)
{
	int i, dive_no = 0;
	struct dive *dive;
	char pre[1000], post[1000];

	for_each_dive (i, dive) {
		if (selected_only) {
			if (!dive->selected)
				continue;
		}
		struct dive_site *ds = get_dive_site_for_dive(dive);
		if (!ds || !dive_site_has_gps_location(ds))
			continue;
		put_degrees(b, ds->latitude, "temp = new google.maps.Marker({position: new google.maps.LatLng(", "");
		put_degrees(b, ds->longitude, ",", ")});\n");
		put_string(b, "markers.push(temp);\ntempinfowindow = new google.maps.InfoWindow({content: '<div id=\"content\">'+'<div id=\"siteNotice\">'+'</div>'+'<div id=\"bodyContent\">");
		snprintf(pre, sizeof(pre), "<p>%s ", translate("gettextFromC", "Date:"));
		put_HTML_date(b, dive, pre, "</p>");
		snprintf(pre, sizeof(pre), "<p>%s ", translate("gettextFromC", "Time:"));
		put_HTML_time(b, dive, pre, "</p>");
		snprintf(pre, sizeof(pre), "<p>%s ", translate("gettextFromC", "Duration:"));
		snprintf(post, sizeof(post), " %s</p>", translate("gettextFromC", "min"));
		put_duration(b, dive->duration, pre, post);
		put_string(b, "<p> ");
		put_HTML_quoted(b, translate("gettextFromC", "Max. depth:"));
		put_HTML_depth(b, dive, " ", "</p>");
		put_string(b, "<p> ");
		put_HTML_quoted(b, translate("gettextFromC", "Air temp.:"));
		put_HTML_airtemp(b, dive, " ", "</p>");
		put_string(b, "<p> ");
		put_HTML_quoted(b, translate("gettextFromC", "Water temp.:"));
		put_HTML_watertemp(b, dive, " ", "</p>");
		snprintf(pre, sizeof(pre), "<p>%s <b>", translate("gettextFromC", "Location:"));
		put_string(b, pre);
		put_HTML_quoted(b, get_dive_location(dive));
		put_string(b, "</b></p>");
		snprintf(pre, sizeof(pre), "<p> %s ", translate("gettextFromC", "Notes:"));
		put_HTML_notes(b, dive, pre, " </p>");
		put_string(b, "</p>'+'</div>'+'</div>'});\ninfowindows.push(tempinfowindow);\n");
		put_format(b, "google.maps.event.addListener(markers[%d], 'mouseover', function() {\ninfowindows[%d].open(map,markers[%d]);}", dive_no, dive_no, dive_no);
		put_format(b, ");google.maps.event.addListener(markers[%d], 'mouseout', function() {\ninfowindows[%d].close();});\n", dive_no, dive_no);
		dive_no++;
	}
}

开发者ID:ro-ot，项目名称:subsurface，代码行数:45，代码来源:worldmap-save.c

示例16: save_one_dive_to_mb

void save_one_dive_to_mb(struct membuffer *b, struct dive *dive)
{
	struct divecomputer *dc;

	put_string(b, "<dive");
	if (dive->number)
		put_format(b, " number='%d'", dive->number);
	if (dive->tripflag == NO_TRIP)
		put_format(b, " tripflag='NOTRIP'");
	if (dive->rating)
		put_format(b, " rating='%d'", dive->rating);
	if (dive->visibility)
		put_format(b, " visibility='%d'", dive->visibility);
	save_tags(b, dive->tag_list);
	if (dive->dive_site_uuid)
		put_format(b, " divesiteid='%8x'", dive->dive_site_uuid);
	show_date(b, dive->when);
	put_format(b, " duration='%u:%02u min'>\n",
		   FRACTION(dive->dc.duration.seconds, 60));
	save_overview(b, dive);
	save_cylinder_info(b, dive);
	save_weightsystem_info(b, dive);
	save_dive_temperature(b, dive);
	/* Save the dive computer data */
	for_each_dc(dive, dc)
		save_dc(b, dive, dc);
	FOR_EACH_PICTURE(dive)
		save_picture(b, picture);
	put_format(b, "</dive>\n");
}

开发者ID:pidancier，项目名称:subsurface，代码行数:30，代码来源:save-xml.c

示例17: save_one_event

static void save_one_event(struct membuffer *b, struct event *ev)
{
	put_format(b, "event %d:%02d", FRACTION(ev->time.seconds, 60));
	show_index(b, ev->type, "type=", "");
	show_index(b, ev->flags, "flags=", "");
	show_index(b, ev->value, "value=", "");
	show_utf8(b, " name=", ev->name, "");
	put_string(b, "\n");
}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:9，代码来源:save-git.c

示例18: put_degrees

void put_degrees(struct membuffer *b, degrees_t value, const char *pre, const char *post)
{
	int udeg = value.udeg;
	const char *sign = "";

	if (udeg < 0) {
		udeg = -udeg;
		sign = "-";
	}
	put_format(b,"%s%s%u.%06u%s", pre, sign, FRACTION(udeg, 1000000), post);
}

开发者ID:codigoda，项目名称:subsurface，代码行数:11，代码来源:membuffer.c

示例19: save_dc

static void save_dc(struct membuffer *b, struct dive *dive, struct divecomputer *dc)
{
	show_utf8(b, "model ", dc->model, "\n");
	if (dc->deviceid)
		put_format(b, "deviceid %08x\n", dc->deviceid);
	if (dc->diveid)
		put_format(b, "diveid %08x\n", dc->diveid);
	if (dc->when && dc->when != dive->when)
		show_date(b, dc->when);
	if (dc->duration.seconds && dc->duration.seconds != dive->dc.duration.seconds)
		put_duration(b, dc->duration, "duration ", "min\n");

	save_depths(b, dc);
	save_temperatures(b, dc);
	save_airpressure(b, dc);
	save_salinity(b, dc);
	put_duration(b, dc->surfacetime, "surfacetime ", "min\n");

	save_events(b, dc->events);
	save_samples(b, dc->samples, dc->sample);
}

开发者ID:ricardoaranha，项目名称:subsurface，代码行数:21，代码来源:save-git.c

示例20: save_dc

static void save_dc(struct membuffer *b, struct dive *dive, struct divecomputer *dc)
{
	put_format(b, "  <divecomputer");
	show_utf8(b, dc->model, " model='", "'", 1);
	if (dc->deviceid)
		put_format(b, " deviceid='%08x'", dc->deviceid);
	if (dc->diveid)
		put_format(b, " diveid='%08x'", dc->diveid);
	if (dc->when && dc->when != dive->when)
		show_date(b, dc->when);
	if (dc->duration.seconds && dc->duration.seconds != dive->dc.duration.seconds)
		put_duration(b, dc->duration, " duration='", " min'");
	if (dc->divemode != OC) {
		for (enum dive_comp_type i = 0; i < NUM_DC_TYPE; i++)
			if (dc->divemode == i)
				show_utf8(b, divemode_text[i], " dctype='", "'", 1);
		if (dc->no_o2sensors)
			put_format(b," no_o2sensors='%d'", dc->no_o2sensors);
	}
	put_format(b, ">\n");
	save_depths(b, dc);
	save_temperatures(b, dc);
	save_airpressure(b, dc);
	save_salinity(b, dc);
	put_duration(b, dc->surfacetime, "  <surfacetime>", " min</surfacetime>\n");
	save_extra_data(b, dc->extra_data);
	save_events(b, dc->events);
	save_samples(b, dc->samples, dc->sample);

	put_format(b, "  </divecomputer>\n");
}

开发者ID:pidancier，项目名称:subsurface，代码行数:31，代码来源:save-xml.c

注：本文中的put_format函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ put_fs_byte函数代码示例发布时间：2022-05-30

C++ put_flush_packet函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19194|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8327|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9658|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ put_format函数代码示例

示例1: save_cylinder_info

示例2: save_one_device

示例3: show_utf8

示例4: save_one_event

示例5: put_gasmix

示例6: show_date

示例7: create_dive_name

示例8: save_dives_buffer

示例9: put_milli

示例10: create_trip_name

示例11: save_one_event

示例12: save_weightsystem_info

示例13: put_duration

示例14: put_salinity

示例15: writeMarkers

示例16: save_one_dive_to_mb

示例17: save_one_event

示例18: put_degrees

示例19: save_dc

示例20: save_dc

请发表评论

全部评论

上一篇：

下一篇：

AnsiString在Delphi中虽然不可用，但是，在

krishnaik06/Machine-Learning-in-90-days

CVE-2022-31537

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053