C++ put_cmsg函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中put_cmsg函数的典型用法代码示例。如果您正苦于以下问题：C++ put_cmsg函数的具体用法？C++ put_cmsg怎么用？C++ put_cmsg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了put_cmsg函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: anc_data_recv

/**
 * anc_data_recv - optionally capture ancillary data for received message
 * @m: descriptor for message info
 * @msg: received message header
 * @tport: TIPC port associated with message
 *
 * Note: Ancillary data is not captured if not requested by receiver.
 *
 * Returns 0 if successful, otherwise errno
 */
static int anc_data_recv(struct msghdr *m, struct tipc_msg *msg,
				struct tipc_port *tport)
{
	u32 anc_data[3];
	u32 err;
	u32 dest_type;
	int has_name;
	int res;

	if (likely(m->msg_controllen == 0))
		return 0;

	/* Optionally capture errored message object(s) */
	err = msg ? msg_errcode(msg) : 0;
	if (unlikely(err)) {
		anc_data[0] = err;
		anc_data[1] = msg_data_sz(msg);
		res = put_cmsg(m, SOL_TIPC, TIPC_ERRINFO, 8, anc_data);
		if (res)
			return res;
		if (anc_data[1]) {
			res = put_cmsg(m, SOL_TIPC, TIPC_RETDATA, anc_data[1],
				       msg_data(msg));
			if (res)
				return res;
		}
	}

	/* Optionally capture message destination object */
	dest_type = msg ? msg_type(msg) : TIPC_DIRECT_MSG;
	switch (dest_type) {
	case TIPC_NAMED_MSG:
		has_name = 1;
		anc_data[0] = msg_nametype(msg);
		anc_data[1] = msg_namelower(msg);
		anc_data[2] = msg_namelower(msg);
		break;
	case TIPC_MCAST_MSG:
		has_name = 1;
		anc_data[0] = msg_nametype(msg);
		anc_data[1] = msg_namelower(msg);
		anc_data[2] = msg_nameupper(msg);
		break;
	case TIPC_CONN_MSG:
		has_name = (tport->conn_type != 0);
		anc_data[0] = tport->conn_type;
		anc_data[1] = tport->conn_instance;
		anc_data[2] = tport->conn_instance;
		break;
	default:
		has_name = 0;
	}
	if (has_name) {
		res = put_cmsg(m, SOL_TIPC, TIPC_DESTNAME, 12, anc_data);
		if (res)
			return res;
	}

	return 0;
}

开发者ID:BitOBSessiOn，项目名称:android_kernel_asus_P01M，代码行数:70，代码来源:socket.c

示例2: hci_sock_cmsg

static inline void hci_sock_cmsg(struct sock *sk, struct msghdr *msg, struct sk_buff *skb)
{
	__u32 mask = hci_pi(sk)->cmsg_mask;

	if (mask & HCI_CMSG_DIR)
        	put_cmsg(msg, SOL_HCI, HCI_CMSG_DIR, sizeof(int), &bluez_cb(skb)->incomming);

	if (mask & HCI_CMSG_TSTAMP)
        	put_cmsg(msg, SOL_HCI, HCI_CMSG_TSTAMP, sizeof(skb->stamp), &skb->stamp);
}

开发者ID:ProjectZeroSlackr，项目名称:linux-2.4.32-ipod，代码行数:10，代码来源:hci_sock.c

示例3: ip_cmsg_recv_pktinfo

static void ip_cmsg_recv_pktinfo(struct msghdr *msg, struct sk_buff *skb)
{
	struct in_pktinfo info = *PKTINFO_SKB_CB(skb);

	info.ipi_addr.s_addr = ip_hdr(skb)->daddr;

	put_cmsg(msg, SOL_IP, IP_PKTINFO, sizeof(info), &info);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:8，代码来源:ip_sockglue.c

示例4: ip_cmsg_recv_opts

static void ip_cmsg_recv_opts(struct msghdr *msg, struct sk_buff *skb)
{
	if (IPCB(skb)->opt.optlen == 0)
		return;

	put_cmsg(msg, SOL_IP, IP_RECVOPTS, IPCB(skb)->opt.optlen,
		 ip_hdr(skb) + 1);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:8，代码来源:ip_sockglue.c

示例5: ip_cmsg_recv_fragsize

static void ip_cmsg_recv_fragsize(struct msghdr *msg, struct sk_buff *skb)
{
	int val;

	if (IPCB(skb)->frag_max_size == 0)
		return;

	val = IPCB(skb)->frag_max_size;
	put_cmsg(msg, SOL_IP, IP_RECVFRAGSIZE, sizeof(val), &val);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:10，代码来源:ip_sockglue.c

示例6: mISDN_sock_cmsg

static inline void
mISDN_sock_cmsg(struct sock *sk, struct msghdr *msg, struct sk_buff *skb)
{
	struct timeval	tv;

	if (_pms(sk)->cmask & MISDN_TIME_STAMP) {
		skb_get_timestamp(skb, &tv);
		put_cmsg(msg, SOL_MISDN, MISDN_TIME_STAMP, sizeof(tv), &tv);
	}
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:10，代码来源:socket.c

示例7: ip_cmsg_recv_checksum

static void ip_cmsg_recv_checksum(struct msghdr *msg, struct sk_buff *skb,
				  int offset)
{
	__wsum csum = skb->csum;

	if (skb->ip_summed != CHECKSUM_COMPLETE)
		return;

	if (offset != 0)
		csum = csum_sub(csum, csum_partial(skb->data, offset, 0));

	put_cmsg(msg, SOL_IP, IP_CHECKSUM, sizeof(__wsum), &csum);
}

开发者ID:galvinli，项目名称:ath，代码行数:13，代码来源:ip_sockglue.c

示例8: datagram_recv_ctl

int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb)
{
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct inet6_skb_parm *opt = IP6CB(skb);
	unsigned char *nh = skb_network_header(skb);

	if (np->rxopt.bits.rxinfo) {
		struct in6_pktinfo src_info;

		src_info.ipi6_ifindex = opt->iif;
		ipv6_addr_copy(&src_info.ipi6_addr, &ipv6_hdr(skb)->daddr);
		put_cmsg(msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
	}

	if (np->rxopt.bits.rxhlim) {
		int hlim = ipv6_hdr(skb)->hop_limit;
		put_cmsg(msg, SOL_IPV6, IPV6_HOPLIMIT, sizeof(hlim), &hlim);
	}

	if (np->rxopt.bits.rxtclass) {
		int tclass = (ntohl(*(__be32 *)ipv6_hdr(skb)) >> 20) & 0xff;
		put_cmsg(msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass);
	}

开发者ID:96boards，项目名称:wilink8-wlan_wl18xx，代码行数:23，代码来源:datagram.c

示例9: ip_cmsg_recv_checksum

static void ip_cmsg_recv_checksum(struct msghdr *msg, struct sk_buff *skb,
				  int tlen, int offset)
{
	__wsum csum = skb->csum;

	if (skb->ip_summed != CHECKSUM_COMPLETE)
		return;

	if (offset != 0) {
		int tend_off = skb_transport_offset(skb) + tlen;
		csum = csum_sub(csum, skb_checksum(skb, tend_off, offset, 0));
	}

	put_cmsg(msg, SOL_IP, IP_CHECKSUM, sizeof(__wsum), &csum);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:15，代码来源:ip_sockglue.c

示例10: ip_cmsg_recv_retopts

static void ip_cmsg_recv_retopts(struct msghdr *msg, struct sk_buff *skb)
{
	unsigned char optbuf[sizeof(struct ip_options) + 40];
	struct ip_options *opt = (struct ip_options *)optbuf;

	if (IPCB(skb)->opt.optlen == 0)
		return;

	if (ip_options_echo(opt, skb)) {
		msg->msg_flags |= MSG_CTRUNC;
		return;
	}
	ip_options_undo(opt);

	put_cmsg(msg, SOL_IP, IP_RETOPTS, opt->optlen, opt->__data);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:16，代码来源:ip_sockglue.c

示例11: ip_cmsg_recv_pktinfo

static void ip_cmsg_recv_pktinfo(struct msghdr *msg, struct sk_buff *skb)
{
	struct in_pktinfo info;
	struct rtable *rt = skb_rtable(skb);

	info.ipi_addr.s_addr = ip_hdr(skb)->daddr;
	if (rt) {
		info.ipi_ifindex = rt->rt_iif;
		info.ipi_spec_dst.s_addr = rt->rt_spec_dst;
	} else {
		info.ipi_ifindex = 0;
		info.ipi_spec_dst.s_addr = 0;
	}

	put_cmsg(msg, SOL_IP, IP_PKTINFO, sizeof(info), &info);
}

开发者ID:jing-git，项目名称:rt-n56u，代码行数:16，代码来源:ip_sockglue.c

示例12: ipv6_recv_rxpmtu

/*
 *	Handle IPV6_RECVPATHMTU
 */
int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
		     int *addr_len)
{
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct sk_buff *skb;
	struct sockaddr_in6 *sin;
	struct ip6_mtuinfo mtu_info;
	int err;
	int copied;

	err = -EAGAIN;
	skb = xchg(&np->rxpmtu, NULL);
	if (skb == NULL)
		goto out;

	copied = skb->len;
	if (copied > len) {
		msg->msg_flags |= MSG_TRUNC;
		copied = len;
	}
	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
	if (err)
		goto out_free_skb;

	sock_recv_timestamp(msg, sk, skb);

	memcpy(&mtu_info, IP6CBMTU(skb), sizeof(mtu_info));

	sin = (struct sockaddr_in6 *)msg->msg_name;
	if (sin) {
		sin->sin6_family = AF_INET6;
		sin->sin6_flowinfo = 0;
		sin->sin6_port = 0;
		sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id;
		ipv6_addr_copy(&sin->sin6_addr, &mtu_info.ip6m_addr.sin6_addr);
		*addr_len = sizeof(*sin);
	}

	put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info);

	err = copied;

out_free_skb:
	kfree_skb(skb);
out:
	return err;
}

开发者ID:jing-git，项目名称:rt-n56u，代码行数:50，代码来源:datagram.c

示例13: ip_cmsg_recv_security

static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb)
{
	char *secdata;
	u32 seclen, secid;
	int err;

	err = security_socket_getpeersec_dgram(NULL, skb, &secid);
	if (err)
		return;

	err = security_secid_to_secctx(secid, &secdata, &seclen);
	if (err)
		return;

	put_cmsg(msg, SOL_IP, SCM_SECURITY, seclen, secdata);
	security_release_secctx(secdata, seclen);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:17，代码来源:ip_sockglue.c

示例14: __sctp_ulpevent_read_nxtinfo

/* RFC6458, Section 5.3.6. SCTP Next Receive Information Structure
 * (SCTP_NXTINFO)
 */
static void __sctp_ulpevent_read_nxtinfo(const struct sctp_ulpevent *event,
					 struct msghdr *msghdr,
					 const struct sk_buff *skb)
{
	struct sctp_nxtinfo nxtinfo;

	memset(&nxtinfo, 0, sizeof(nxtinfo));
	nxtinfo.nxt_sid = event->stream;
	nxtinfo.nxt_ppid = event->ppid;
	nxtinfo.nxt_flags = event->flags;
	if (sctp_ulpevent_is_notification(event))
		nxtinfo.nxt_flags |= SCTP_NOTIFICATION;
	nxtinfo.nxt_length = skb->len;
	nxtinfo.nxt_assoc_id = sctp_assoc2id(event->asoc);

	put_cmsg(msghdr, IPPROTO_SCTP, SCTP_NXTINFO,
		 sizeof(nxtinfo), &nxtinfo);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:21，代码来源:ulpevent.c

示例15: ip_cmsg_recv_dstaddr

static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb)
{
	__be16 _ports[2], *ports;
	struct sockaddr_in sin;

	/* All current transport protocols have the port numbers in the
	 * first four bytes of the transport header and this function is
	 * written with this assumption in mind.
	 */
	ports = skb_header_pointer(skb, skb_transport_offset(skb),
				   sizeof(_ports), &_ports);
	if (!ports)
		return;

	sin.sin_family = AF_INET;
	sin.sin_addr.s_addr = ip_hdr(skb)->daddr;
	sin.sin_port = ports[1];
	memset(sin.sin_zero, 0, sizeof(sin.sin_zero));

	put_cmsg(msg, SOL_IP, IP_ORIGDSTADDR, sizeof(sin), &sin);
}

开发者ID:multipath-tcp，项目名称:mptcp_net-next，代码行数:21，代码来源:ip_sockglue.c

示例16: ip_cmsg_recv_dstaddr

static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb)
{
	struct sockaddr_in sin;
	const struct iphdr *iph = ip_hdr(skb);
	__be16 *ports = (__be16 *)skb_transport_header(skb);

	if (skb_transport_offset(skb) + 4 > (int)skb->len)
		return;

	/* All current transport protocols have the port numbers in the
	 * first four bytes of the transport header and this function is
	 * written with this assumption in mind.
	 */

	sin.sin_family = AF_INET;
	sin.sin_addr.s_addr = iph->daddr;
	sin.sin_port = ports[1];
	memset(sin.sin_zero, 0, sizeof(sin.sin_zero));

	put_cmsg(msg, SOL_IP, IP_ORIGDSTADDR, sizeof(sin), &sin);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:21，代码来源:ip_sockglue.c

示例17: sctp_ulpevent_read_rcvinfo

/* RFC6458, Section 5.3.5 SCTP Receive Information Structure
 * (SCTP_SNDRCV)
 */
void sctp_ulpevent_read_rcvinfo(const struct sctp_ulpevent *event,
				struct msghdr *msghdr)
{
	struct sctp_rcvinfo rinfo;

	if (sctp_ulpevent_is_notification(event))
		return;

	memset(&rinfo, 0, sizeof(struct sctp_rcvinfo));
	rinfo.rcv_sid = event->stream;
	rinfo.rcv_ssn = event->ssn;
	rinfo.rcv_ppid = event->ppid;
	rinfo.rcv_flags = event->flags;
	rinfo.rcv_tsn = event->tsn;
	rinfo.rcv_cumtsn = event->cumtsn;
	rinfo.rcv_assoc_id = sctp_assoc2id(event->asoc);
	rinfo.rcv_context = event->asoc->default_rcv_context;

	put_cmsg(msghdr, IPPROTO_SCTP, SCTP_RCVINFO,
		 sizeof(rinfo), &rinfo);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:24，代码来源:ulpevent.c

示例18: sctp_ulpevent_read_sndrcvinfo

/* RFC6458, Section 5.3.2. SCTP Header Information Structure
 * (SCTP_SNDRCV, DEPRECATED)
 */
void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
				   struct msghdr *msghdr)
{
	struct sctp_sndrcvinfo sinfo;

	if (sctp_ulpevent_is_notification(event))
		return;

	memset(&sinfo, 0, sizeof(sinfo));
	sinfo.sinfo_stream = event->stream;
	sinfo.sinfo_ssn = event->ssn;
	sinfo.sinfo_ppid = event->ppid;
	sinfo.sinfo_flags = event->flags;
	sinfo.sinfo_tsn = event->tsn;
	sinfo.sinfo_cumtsn = event->cumtsn;
	sinfo.sinfo_assoc_id = sctp_assoc2id(event->asoc);
	/* Context value that is set via SCTP_CONTEXT socket option. */
	sinfo.sinfo_context = event->asoc->default_rcv_context;
	/* These fields are not used while receiving. */
	sinfo.sinfo_timetolive = 0;

	put_cmsg(msghdr, IPPROTO_SCTP, SCTP_SNDRCV,
		 sizeof(sinfo), &sinfo);
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:27，代码来源:ulpevent.c

示例19: ipv6_getsockopt

int ipv6_getsockopt(struct sock *sk, int level, int optname,
		    char __user *optval, int __user *optlen)
{
	struct ipv6_pinfo *np = inet6_sk(sk);
	int len;
	int val;

	if (level == SOL_IP && sk->sk_type != SOCK_RAW)
		return udp_prot.getsockopt(sk, level, optname, optval, optlen);
	if(level!=SOL_IPV6)
		return -ENOPROTOOPT;
	if (get_user(len, optlen))
		return -EFAULT;
	switch (optname) {
	case IPV6_ADDRFORM:
		if (sk->sk_protocol != IPPROTO_UDP &&
		    sk->sk_protocol != IPPROTO_TCP)
			return -EINVAL;
		if (sk->sk_state != TCP_ESTABLISHED)
			return -ENOTCONN;
		val = sk->sk_family;
		break;
	case MCAST_MSFILTER:
	{
		struct group_filter gsf;
		int err;

		if (len < GROUP_FILTER_SIZE(0))
			return -EINVAL;
		if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0)))
			return -EFAULT;
		lock_sock(sk);
		err = ip6_mc_msfget(sk, &gsf,
			(struct group_filter __user *)optval, optlen);
		release_sock(sk);
		return err;
	}

	case IPV6_PKTOPTIONS:
	{
		struct msghdr msg;
		struct sk_buff *skb;

		if (sk->sk_type != SOCK_STREAM)
			return -ENOPROTOOPT;

		msg.msg_control = optval;
		msg.msg_controllen = len;
		msg.msg_flags = 0;

		lock_sock(sk);
		skb = np->pktoptions;
		if (skb)
			atomic_inc(&skb->users);
		release_sock(sk);

		if (skb) {
			int err = datagram_recv_ctl(sk, &msg, skb);
			kfree_skb(skb);
			if (err)
				return err;
		} else {
			if (np->rxopt.bits.rxinfo) {
				struct in6_pktinfo src_info;
				src_info.ipi6_ifindex = np->mcast_oif;
				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
				put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
			}
			if (np->rxopt.bits.rxhlim) {
				int hlim = np->mcast_hops;
				put_cmsg(&msg, SOL_IPV6, IPV6_HOPLIMIT, sizeof(hlim), &hlim);
			}
		}
		len -= msg.msg_controllen;
		return put_user(len, optlen);
	}
	case IPV6_MTU:
	{
		struct dst_entry *dst;
		val = 0;	
		lock_sock(sk);
		dst = sk_dst_get(sk);
		if (dst) {
			val = dst_mtu(dst);
			dst_release(dst);
		}
		release_sock(sk);
		if (!val)
			return -ENOTCONN;
		break;
	}

	case IPV6_V6ONLY:
		val = np->ipv6only;
		break;

	case IPV6_PKTINFO:
		val = np->rxopt.bits.rxinfo;
		break;

//.........这里部分代码省略.........

开发者ID:OpenHMR，项目名称:Open-HMR600，代码行数:101，代码来源:ipv6_sockglue.c

示例20: do_ipv6_getsockopt

static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
		    char __user *optval, int __user *optlen, unsigned int flags)
{
	struct ipv6_pinfo *np = inet6_sk(sk);
	int len;
	int val;

	if (ip6_mroute_opt(optname))
		return ip6_mroute_getsockopt(sk, optname, optval, optlen);

	if (get_user(len, optlen))
		return -EFAULT;
	switch (optname) {
	case IPV6_ADDRFORM:
		if (sk->sk_protocol != IPPROTO_UDP &&
		    sk->sk_protocol != IPPROTO_UDPLITE &&
		    sk->sk_protocol != IPPROTO_TCP)
			return -ENOPROTOOPT;
		if (sk->sk_state != TCP_ESTABLISHED)
			return -ENOTCONN;
		val = sk->sk_family;
		break;
	case MCAST_MSFILTER:
	{
		struct group_filter gsf;
		int err;

		if (len < GROUP_FILTER_SIZE(0))
			return -EINVAL;
		if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0)))
			return -EFAULT;
		if (gsf.gf_group.ss_family != AF_INET6)
			return -EADDRNOTAVAIL;
		lock_sock(sk);
		err = ip6_mc_msfget(sk, &gsf,
			(struct group_filter __user *)optval, optlen);
		release_sock(sk);
		return err;
	}

	case IPV6_2292PKTOPTIONS:
	{
		struct msghdr msg;
		struct sk_buff *skb;

		if (sk->sk_type != SOCK_STREAM)
			return -ENOPROTOOPT;

		msg.msg_control = (void __force_kernel *)optval;
		msg.msg_controllen = len;
		msg.msg_flags = flags;

		lock_sock(sk);
		skb = np->pktoptions;
		if (skb)
			atomic_inc(&skb->users);
		release_sock(sk);

		if (skb) {
			int err = ip6_datagram_recv_ctl(sk, &msg, skb);
			kfree_skb(skb);
			if (err)
				return err;
		} else {
			if (np->rxopt.bits.rxinfo) {
				struct in6_pktinfo src_info;
				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif :
					np->sticky_pktinfo.ipi6_ifindex;
				src_info.ipi6_addr = np->mcast_oif ? np->daddr : np->sticky_pktinfo.ipi6_addr;
				put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
			}
			if (np->rxopt.bits.rxhlim) {
				int hlim = np->mcast_hops;
				put_cmsg(&msg, SOL_IPV6, IPV6_HOPLIMIT, sizeof(hlim), &hlim);
			}
			if (np->rxopt.bits.rxtclass) {
				int tclass = np->rcv_tclass;
				put_cmsg(&msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass);
			}
			if (np->rxopt.bits.rxoinfo) {
				struct in6_pktinfo src_info;
				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif :
					np->sticky_pktinfo.ipi6_ifindex;
				src_info.ipi6_addr = np->mcast_oif ? np->daddr : np->sticky_pktinfo.ipi6_addr;
				put_cmsg(&msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
			}
			if (np->rxopt.bits.rxohlim) {
				int hlim = np->mcast_hops;
				put_cmsg(&msg, SOL_IPV6, IPV6_2292HOPLIMIT, sizeof(hlim), &hlim);
			}
		}
		len -= msg.msg_controllen;
		return put_user(len, optlen);
	}
	case IPV6_MTU:
	{
		struct dst_entry *dst;

		val = 0;
		rcu_read_lock();
//.........这里部分代码省略.........

开发者ID:garyvan，项目名称:openwrt-1.6，代码行数:101，代码来源:ipv6_sockglue.c

注：本文中的put_cmsg函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ put_compat_timespec函数代码示例发布时间：2022-05-30

C++ put_chunk函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19194|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8327|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9658|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ put_cmsg函数代码示例

示例1: anc_data_recv

示例2: hci_sock_cmsg

示例3: ip_cmsg_recv_pktinfo

示例4: ip_cmsg_recv_opts

示例5: ip_cmsg_recv_fragsize

示例6: mISDN_sock_cmsg

示例7: ip_cmsg_recv_checksum

示例8: datagram_recv_ctl

示例9: ip_cmsg_recv_checksum

示例10: ip_cmsg_recv_retopts

示例11: ip_cmsg_recv_pktinfo

示例12: ipv6_recv_rxpmtu

示例13: ip_cmsg_recv_security

示例14: __sctp_ulpevent_read_nxtinfo

示例15: ip_cmsg_recv_dstaddr

示例16: ip_cmsg_recv_dstaddr

示例17: sctp_ulpevent_read_rcvinfo

示例18: sctp_ulpevent_read_sndrcvinfo

示例19: ipv6_getsockopt

示例20: do_ipv6_getsockopt

请发表评论

全部评论

上一篇：

下一篇：

AnsiString在Delphi中虽然不可用，但是，在

krishnaik06/Machine-Learning-in-90-days

CVE-2022-31537

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053