• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ push_table函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中push_table函数的典型用法代码示例。如果您正苦于以下问题:C++ push_table函数的具体用法?C++ push_table怎么用?C++ push_table使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了push_table函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init_lcm_registers

static void init_lcm_registers(void)
{
#if (!defined(BUILD_UBOOT) && !defined(BUILD_LK))  && defined(INIT_CODE_TUNNING_BY_SD_CARD)  /*                                                                      */
	 //sd_initial

	int line_cnt = 0;

	LCM_PRINT("[LCD] : [KERNEL] init_lcm_registers	\n ");

	if (Filesize(LCD_INITIAL_TXT) > 0)
	{
		line_cnt= lcd_init_read_from_sd();
		if (line_cnt > 0)
		{
			LCM_PRINT("[LCD] : SD card tunning & initial setting!!! \n ");
			push_table(lcm_initialization_setting_sd, sizeof(lcm_initialization_setting_sd) / sizeof(struct LCM_setting_table), 1);
		}
		else	{
			LCM_PRINT("[LCD] : Default initial setting \n ");
			push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
		}
	}
	else
	{
		LCM_PRINT("[LCD] : Default initial setting \n ");
		push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
	}
#else
        push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
	LCM_PRINT("[LCD] init_lcm_registers \n");
#endif  /*                                                                      */
}
开发者ID:CobraJet93,项目名称:kernel-3.10.54,代码行数:32,代码来源:db7436_dsi_vdo_fwvga.c


示例2: lcm_resume

static void lcm_resume(void)
{
	static int temp = 0x46;
	unsigned int data_array[16];

	//zrl add for debug for Cut  screen, 121015
	push_table(lcm_truly_initialization_debug1, sizeof(lcm_truly_initialization_debug1) / sizeof(struct LCM_setting_table), 1);

	data_array[0]= 0x00023902;
	data_array[1]= 0x00|0x00|(temp<<8)|0xD9;
	dsi_set_cmdq(&data_array, 2, 1);

	push_table(lcm_truly_initialization_debug2, sizeof(lcm_truly_initialization_debug2) / sizeof(struct LCM_setting_table), 1);

#if defined(BUILD_LK)
	printf("zrl lcm_resume,temp = 0x%x,data_array[1] = 0x%x\n",temp,data_array[1]);
#else
	printk("zrl lcm_resume111,temp = 0x%x,data_array[1] = 0x%x\n",temp,data_array[1]);
#endif

	//x1=temp%256;
	//x2=temp/256;
	temp+=2;

}
开发者ID:4Fwolf,项目名称:ALCATEL_LCM,代码行数:25,代码来源:otm8009a_6572_dsi_cmd.c


示例3: lcm_esd_recover

//no use
static unsigned int lcm_esd_recover(void)
{
    unsigned char para = 0;
	unsigned int data_array1[16];

  

    SET_RESET_PIN(1);
    MDELAY(10);
    SET_RESET_PIN(0);
    MDELAY(30);
    SET_RESET_PIN(1);
    MDELAY(130);
    #if 0
	push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
	MDELAY(10);
	push_table(lcm_sleep_out_setting, sizeof(lcm_sleep_out_setting) / sizeof(struct LCM_setting_table), 1);
    	MDELAY(10);
    #else
        lcm_init();
    #endif
   
   data_array1[0]= 0x00320500;
   dsi_set_cmdq(data_array1, 1, 1);
   MDELAY(50);

    return 1;
}
开发者ID:P-D-A,项目名称:android_kernel_ark_benefit_m7,代码行数:29,代码来源:hct_rm68200_dsi_vdo_hd_cpt.c


示例4: lcm_setColorMode

static void lcm_setColorMode(long lmode)
{
    //struct LCM_setting_table ce_start[] = {{0xFF,5,{0xFF,0x98,0x06,0x04,0x00}},};
    struct LCM_setting_table ce_disable[] = {{0xFF, 5, {0xFF,0x98,0x06,0x04,0x00}},//page0
        {0x55, 1,  {0x00}},
        {REGFLAG_DELAY, 10, {}},
        {0xFF, 5, {0xFF,0x98,0x06,0x04,0x08}},//page8
        // Setting ending by predefined flag
        {REGFLAG_END_OF_TABLE, 0x00, {}},
    };
    struct LCM_setting_table ce_high[] = {{0xFF, 5, {0xFF,0x98,0x06,0x04,0x00}},
        {0x55, 1, {0xB0}},
        {REGFLAG_DELAY, 10, {}},
        {0xFF, 5, {0xFF,0x98,0x06,0x04,0x08}},
        // Setting ending by predefined flag
        {REGFLAG_END_OF_TABLE, 0x00, {}},
    };
    //push_table(ce_start, sizeof(ce_start)/sizeof(struct LCM_setting_table), 1);
    switch (lmode) {
    case 0:
        push_table(ce_disable, sizeof(ce_disable)/sizeof(struct LCM_setting_table), 1);
        break;
    default:
        push_table(ce_high, sizeof(ce_high)/sizeof(struct LCM_setting_table), 1);
        break;
    }

    s_ucColorMode = (unsigned char)lmode;
}
开发者ID:LosTigeros,项目名称:Trooper2_4.0_5.0_kernel,代码行数:29,代码来源:ili9806c_wvga_dsi_vdo.c


示例5: lcm_init

static void lcm_init(void)
{
int kk =0;
	#if defined(BUILD_LK)
	upmu_set_rg_vgp2_vosel(5);
	upmu_set_rg_vgp2_en(1);

	upmu_set_rg_vgp3_vosel(3);
	upmu_set_rg_vgp3_en(1);	
#else
	hwPowerOn(MT6323_POWER_LDO_VGP2, VOL_2800, "Lance_LCM");
  hwPowerOn(MT6323_POWER_LDO_VGP3, VOL_1800, "Lance_LCM");
#endif
    MDELAY(100);


    SET_RESET_PIN(1);
    SET_RESET_PIN(0);
    MDELAY(10);//10
    SET_RESET_PIN(1);
    MDELAY(50);//50
     kk = lcm_check_id();
	if(kk == 1)
	{
            push_table(lcm_initialization_setting_ykl, sizeof(lcm_initialization_setting_ykl) / sizeof(struct LCM_setting_table), 1);
	}
	else
	{
           push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
	}
}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:31,代码来源:otm9605a_aizuoertai_A50100N51HD_dsi_qhd.c


示例6: lcm_suspend

static void lcm_suspend(void)
{
//zrl add for optimize the LCD begin,130723
//zrl add for optimize the LCD end,130723
		
	push_table(lcm_deep_sleep_mode_in_setting, sizeof(lcm_deep_sleep_mode_in_setting) / sizeof(struct LCM_setting_table), 1);
}
开发者ID:4Fwolf,项目名称:ALCATEL_LCM,代码行数:7,代码来源:otm8009a_6572_dsi_cmd.c


示例7: lcm_resume_tm

static void lcm_resume_tm(void)
{

    //enable VSP & VSN
	lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENP_PIN, GPIO_OUT_ONE);
	mdelay(10);
	lcm_util.set_gpio_out(GPIO_LCD_BIAS_ENN_PIN, GPIO_OUT_ONE);
    msleep(50); 

    //reset low to high
    lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ONE);
    mdelay(5); 
    lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ZERO);
    mdelay(5); 
    lcm_util.set_gpio_out(GPIO_DISP_LRSTB_PIN, GPIO_OUT_ONE);
    msleep(20); 

    push_table(lcm_initialization_setting_tm, sizeof(lcm_initialization_setting_tm) / sizeof(struct LCM_setting_table), 1);
    //Back to MP.P7 baseline , solve LCD display abnormal On the right
    //when sleep out, config output high ,enable backlight drv chip  
    lcm_util.set_gpio_out(GPIO_LCD_DRV_EN_PIN, GPIO_OUT_ONE);

    LCD_DEBUG("uboot:tm_nt35521_lcm_resume\n");

}
开发者ID:jawad6233,项目名称:android_kernel_huawei_h30t00,代码行数:25,代码来源:nt35521_hd720_dsi_vdo_tm.c


示例8: keepercall_receive

// in: linda_ud, key [, key]?
// out: (key, val) or nothing
int keepercall_receive( lua_State* L)
{
	int top = lua_gettop( L);
	int i;
	push_table( L, 1);                           // ud keys fifos
	lua_replace( L, 1);                          // fifos keys
	for( i = 2; i <= top; ++ i)
	{
		keeper_fifo* fifo;
		lua_pushvalue( L, i);                      // fifos keys key[i]
		lua_rawget( L, 1);                         // fifos keys fifo
		fifo = prepare_fifo_access( L, -1);        // fifos keys fifo
		if( fifo != NULL && fifo->count > 0)
		{
			fifo_pop( L, fifo, 1);                   // fifos keys val
			if( !lua_isnil( L, -1))
			{
				lua_replace( L, 1);                    // val keys
				lua_settop( L, i);                     // val keys key[i]
				if( i != 2)
				{
					lua_replace( L, 2);                  // val key keys
					lua_settop( L, 2);                   // val key
				}
				lua_insert( L, 1);                     // key, val
				return 2;
			}
		}
		lua_settop( L, top);                       // data keys
	}
	// nothing to receive
	return 0;
}
开发者ID:AlexKordic,项目名称:lanes,代码行数:35,代码来源:keeper.c


示例9: lcm_compare_id

static unsigned int lcm_compare_id(void)
{
	unsigned int id = 0;
	unsigned char buffer[5];
	unsigned int array[16];

	SET_RESET_PIN(1);	//NOTE:should reset LCM firstly
	MDELAY(10);
	SET_RESET_PIN(0);
	MDELAY(50);
	SET_RESET_PIN(1);
	MDELAY(50);

	push_table(lcm_compare_id_setting,
		   sizeof(lcm_compare_id_setting) /
		   sizeof(struct LCM_setting_table), 1);

	array[0] = 0x00033700;
	dsi_set_cmdq(array, 1, 1);
	MDELAY(5);
	read_reg_v2(0xC5, buffer, 3);
	id = ((buffer[0] << 8) | buffer[1]);	//we only need ID
#if defined(BUILD_LK)
	printf
	    (" [nt35512_auo445_ykl] %s, id = 0x%x,buffer[0] = 0x%x,buffer[1] = 0x%x buffer[2] = 0x%x\n",
	     __func__, id, buffer[0], buffer[1], buffer[2]);
#endif
	return (LCM_NT35512_HSD_HST_ID == id) ? 1 : 0;
}
开发者ID:Lesozav25,项目名称:ZOPO-TSN,代码行数:29,代码来源:nt35512_dsi_vdo.c


示例10: lcm_init

static void lcm_init(void)
{
#ifdef BUILD_LK 
	printf("[LK/LCM] lcm_init() enter\n");
	SET_RESET_PIN(1);
	MDELAY(10);
	
	SET_RESET_PIN(0);
	MDELAY(10);
	
	SET_RESET_PIN(1);
	MDELAY(10);
	
	// when phone initial , config output high, enable backlight drv chip  
	push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);	

	lcm_set_gpio_output(GPIO_LCD_BL_EN, GPIO_OUT_ONE);
	MDELAY(10);
	
	printf("[LK/LCM] lcm_init() end\n");
#else

	pr_debug("[Kernel/LCM] lcm_init() enter\n");

#endif
}
开发者ID:John677,项目名称:Kernal_k3note,代码行数:26,代码来源:nt35523_wxga_dsi_vdo_boe.c


示例11: lcm_init

static void lcm_init(void)
{
	unsigned int data_array[64];
	
	#if defined(BUILD_LK)
	upmu_set_rg_vgp2_vosel(5);
	upmu_set_rg_vgp2_en(1);

	upmu_set_rg_vgp3_vosel(3);
	upmu_set_rg_vgp3_en(1);	
#else
	hwPowerOn(MT6323_POWER_LDO_VGP2, VOL_2800, "Lance_LCM");
       hwPowerOn(MT6323_POWER_LDO_VGP3, VOL_1800, "Lance_LCM");
#endif

    mt_set_gpio_mode(59,GPIO_MODE_00);
    mt_set_gpio_dir(59,GPIO_DIR_OUT);
    mt_set_gpio_out(59,GPIO_OUT_ONE);
 MDELAY(10);//Must > 10ms
	 mt_set_gpio_out(59,GPIO_OUT_ZERO);
 MDELAY(10);//Must > 10ms
	  mt_set_gpio_out(59,GPIO_OUT_ONE);
   MDELAY(120);//Must > 120m

    push_table(lcm_initialization_setting, sizeof(lcm_initialization_setting) / sizeof(struct LCM_setting_table), 1);
}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:26,代码来源:otm9605_hengsheng_HS050PQ_76H_CPT_dsi_vdo_qhd.c


示例12: keepercall_limit

// in: linda_ud key n
// out: true or nil
int keepercall_limit( lua_State* L)
{
	keeper_fifo* fifo;
	int limit = (int) lua_tointeger( L, 3);
	push_table( L, 1);                                 // ud key n fifos
	lua_replace( L, 1);                                // fifos key n
	lua_pop( L, 1);                                    // fifos key
	lua_pushvalue( L, -1);                             // fifos key key
	lua_rawget( L, -3);                                // fifos key fifo|nil
	fifo = (keeper_fifo*) lua_touserdata( L, -1);
	if( fifo ==  NULL)
	{                                                  // fifos key nil
		lua_pop( L, 1);                                  // fifos key
		fifo_new( L);                                    // fifos key fifo
		fifo = (keeper_fifo*) lua_touserdata( L, -1);
		lua_rawset( L, -3);                              // fifos
	}
	// remove any clutter on the stack
	lua_settop( L, 0);
	// return true if we decide that blocked threads waiting to write on that key should be awakened
	// this is the case if we detect the key was full but it is no longer the case
	if(
			 ((fifo->limit >= 0) && (fifo->count >= fifo->limit)) // the key was full if limited and count exceeded the previous limit
		&& ((limit < 0) || (fifo->count < limit)) // the key is not full if unlimited or count is lower than the new limit
	)
	{
		lua_pushboolean( L, 1);
	}
	// set the new limit
	fifo->limit = limit;
	// return 0 or 1 value
	return lua_gettop( L);
}
开发者ID:AlexShiLucky,项目名称:luapower-all,代码行数:35,代码来源:keeper.c


示例13: lcm_resume

static void lcm_resume(void)
{
	
		//add by xia lei jie for LCD INIT
		//lcm_init();
	push_table(lcm_sleep_out_setting, sizeof(lcm_sleep_out_setting) / sizeof(struct LCM_setting_table), 1);
}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:7,代码来源:nt35512_apex_MSA45119N50BN_BOE_dsi_2_vdo_fwvga.c


示例14: lcm_init

static void lcm_init(void)
{
//	SET_RESET_PIN(0);
//	MDELAY(1);
			
#ifdef BUILD_LK	
	upmu_set_rg_vgp3_vosel(3);   //3 means 1.8V
	upmu_set_rg_vgp3_en(1);
#else
  if(TRUE != hwPowerOn(MT6323_POWER_LDO_VGP3, VOL_1800,"lcdGP3"))
	{
		printk("%s, Fail to enable digital power\n", __func__);
	}
#endif

	MDELAY(5);		//need 1ms
	
	mt_set_gpio_mode(LCD_5V_LDO, GPIO_MODE_00);
	mt_set_gpio_dir(LCD_5V_LDO, GPIO_DIR_OUT);
	mt_set_gpio_out(LCD_5V_LDO, GPIO_OUT_ONE);
	
	
	MDELAY(10);      //need 1ms
	           	
	SET_RESET_PIN(1);
	MDELAY(10);  		//need 10ms    

//	init_lcm_registers();
	push_table(lcm_initialization_setting);
}
开发者ID:dheaapriandi,项目名称:ridon-kernel-cross82_3821,代码行数:30,代码来源:r63311_fhd_dsi_vdo_sharp.c


示例15: lcm_init

static void lcm_init(void)
{


#ifdef BUILD_LK
    upmu_set_rg_vgp2_vosel(5);
    upmu_set_rg_vgp2_en(1);
    MDELAY(50);
    
    upmu_set_rg_vgp3_vosel(3);
    upmu_set_rg_vgp3_en(1); 
     
#else
    hwPowerOn(MT6323_POWER_LDO_VGP2,VOL_2800,"LCM28");
    hwPowerOn(MT6323_POWER_LDO_VGP3,VOL_1800,"LCM18");
#endif
		  MDELAY(50);

    SET_RESET_PIN(1);
    SET_RESET_PIN(0);
    MDELAY(1);
    SET_RESET_PIN(1);
    MDELAY(10);
  

	 push_table(lcm_initialization_setting1, sizeof(lcm_initialization_setting1) / sizeof(struct LCM_setting_table), 1);
}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:27,代码来源:otm8018b_PUNAI_PT040WVH010A_HSD_dsi_2_wvga.c


示例16: lcm_esd_recover

static unsigned int lcm_esd_recover()
{
	
	 lcm_init();
   
   push_table(lcm_sleep_out_setting, sizeof(lcm_sleep_out_setting) / sizeof(struct LCM_setting_table), 1);
}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:7,代码来源:otm8018b_yashu_YS500FW39_022A_BOE_dsi_fwvga.c


示例17: lcm_resume

static void lcm_resume(void)
{
	//lcm_compare_id();

   //lcm_init();
 
   push_table(lcm_sleep_out_setting, sizeof(lcm_sleep_out_setting) / sizeof(struct LCM_setting_table), 1);

    int   array[4];
   char  buffer[5];
   char  id_high=0;
   char  id_low=0;
   int   id=0;
  array[0] = 0x00053700;// read id return two byte,version and id
   dsi_set_cmdq(array, 1, 1);
   read_reg_v2(0xA1,buffer, 5);
 
   id_high = buffer[2];            //should be 0x80
   Lcd_Log("%s, id_high = 0x%08x\n", __func__, id_high);
   id_low  = buffer[3];            //should be 0x18
   Lcd_Log("%s, id_low = 0x%08x\n", __func__, id_low);
   id      = (id_high<<8)|id_low;  //should be 0x8018

   Lcd_Log("%s,wangdong id = 0x%08x\n", __func__, id); 
 

}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:27,代码来源:otm8018b_PUNAI_PT040WVH010A_HSD_dsi_2_wvga.c


示例18: keepercall_send

// in: linda_ud, key, ...
// out: true|false
int keepercall_send( lua_State* L)
{
	keeper_fifo* fifo;
	int n = lua_gettop( L) - 2;
	push_table( L, 1);                           // ud key ... fifos
	// get the fifo associated to this key in this linda, create it if it doesn't exist
	lua_pushvalue( L, 2);                        // ud key ... fifos key
	lua_rawget( L, -2);                          // ud key ... fifos fifo
	if( lua_isnil( L, -1))
	{
		lua_pop( L, 1);                            // ud key ... fifos
		fifo_new( L);                              // ud key ... fifos fifo
		lua_pushvalue( L, 2);                      // ud key ... fifos fifo key
		lua_pushvalue( L, -2);                     // ud key ... fifos fifo key fifo
		lua_rawset( L, -4);                        // ud key ... fifos fifo
	}
	lua_remove( L, -2);                          // ud key ... fifo
	fifo = (keeper_fifo*) lua_touserdata( L, -1);
	if( fifo->limit >= 0 && fifo->count + n > fifo->limit)
	{
		lua_settop( L, 0);                         //
		lua_pushboolean( L, 0);                    // false
	}
	else
	{
		fifo = prepare_fifo_access( L, -1);
		lua_replace( L, 2);                        // ud fifo ...
		fifo_push( L, fifo, n);                    // ud fifo
		lua_settop( L, 0);                         //
		lua_pushboolean( L, 1);                    // true
	}
	return 1;
}
开发者ID:AlexKordic,项目名称:lanes,代码行数:35,代码来源:keeper.c


示例19: lcm_suspend

static void lcm_suspend(void)
{
   push_table(lcm_deep_sleep_mode_in_setting, sizeof(lcm_deep_sleep_mode_in_setting) / sizeof(struct LCM_setting_table), 1);
   SET_RESET_PIN(0);
   MDELAY(1);
   SET_RESET_PIN(1);
}
开发者ID:SeriniTY320,项目名称:mediatek,代码行数:7,代码来源:ili9806C_hengsheng_HS045PK_02E_dsi_vdo_fwvga.c


示例20: keepercall_receive_batched

//in: linda_ud key mincount [maxcount]
int keepercall_receive_batched( lua_State* L)
{
	int const min_count = (int) lua_tointeger( L, 3);
	if( min_count > 0)
	{
		keeper_fifo* fifo;
		int const max_count = (int) luaL_optinteger( L, 4, min_count);
		lua_settop( L, 2);                                    // ud key
		lua_insert( L, 1);                                    // key ud
		push_table( L, 2);                                    // key ud fifos
		lua_remove( L, 2);                                    // key fifos
		lua_pushvalue( L, 1);                                 // key fifos key
		lua_rawget( L, 2);                                    // key fifos fifo
		lua_remove( L, 2);                                    // key fifo
		fifo = prepare_fifo_access( L, 2);                    // key fifo
		if( fifo != NULL && fifo->count >= min_count)
		{
			fifo_pop( L, fifo, __min( max_count, fifo->count)); // key ...
		}
		else
		{
			lua_settop( L, 0);
		}
		return lua_gettop( L);
	}
	else
	{
		return 0;
	}
}
开发者ID:AlexKordic,项目名称:lanes,代码行数:31,代码来源:keeper.c



注:本文中的push_table函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ push_v3s16函数代码示例发布时间:2022-05-30
下一篇:
C++ push_string函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap