本文整理汇总了C++中pushAddress函数的典型用法代码示例。如果您正苦于以下问题：C++ pushAddress函数的具体用法？C++ pushAddress怎么用？C++ pushAddress使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pushAddress函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: TvbRange_le_ipv4
WSLUA_METHOD TvbRange_le_ipv4(lua_State* L) {
/* Get an Little Endian IPv4 Address from a TvbRange. */
TvbRange tvbr = checkTvbRange(L,1);
Address addr;
guint32* ip_addr;
if ( !(tvbr && tvbr->tvb)) return 0;
if (tvbr->tvb->expired) {
luaL_error(L,"expired tvb");
return 0;
}
if (tvbr->len != 4)
WSLUA_ERROR(TvbRange_ipv4,"The range must be 4 octets long");
addr = (address *)g_malloc(sizeof(address));
ip_addr = (guint32 *)g_malloc(sizeof(guint32));
*ip_addr = tvb_get_ipv4(tvbr->tvb->ws_tvb,tvbr->offset);
*((guint32 *)ip_addr) = GUINT32_SWAP_LE_BE(*((guint32 *)ip_addr));
SET_ADDRESS(addr, AT_IPv4, 4, ip_addr);
pushAddress(L,addr);
WSLUA_RETURN(1); /* The IPv4 Address */
}
开发者ID:AndresVelasco，项目名称:wireshark，代码行数:26，代码来源:wslua_tvb.c
示例2: allocLocal
void allocLocal(TypePtr typePtr)
{
if(typePtr == IntegerTypePtr)
pushInteger(0);
else if(typePtr == RealTypePtr)
pushReal((float)0.0);
else if(typePtr == BooleanTypePtr)
pushByte(0);
else if(typePtr == CharTypePtr)
pushByte(0);
else
switch(typePtr->form)
{
case FRM_ENUM:
pushInteger(0);
break;
// NOTE: We currently are not supporting sub ranges, until
// we really want 'em...
// case FRM_SUBRANGE:
// allocLocal(typePtr->info.subrange.rangeTypePtr);
// break;
case FRM_ARRAY:
PSTR ptr = (PSTR)ABLStackMallocCallback(typePtr->size);
if(!ptr)
ABL_Fatal(0, " ABL: Unable to AblStackHeap->malloc local array ");
pushAddress((Address)ptr);
break;
}
}
开发者ID:BobrDobr69，项目名称:mechcommander2，代码行数:29，代码来源:ablexec.cpp
示例3: TvbRange_ether
WSLUA_METHOD TvbRange_ether(lua_State* L) {
/* Get an Ethernet Address from a TvbRange. */
TvbRange tvbr = checkTvbRange(L,1);
Address addr;
guint8* buff;
if ( !(tvbr && tvbr->tvb)) return 0;
if (tvbr->tvb->expired) {
luaL_error(L,"expired tvb");
return 0;
}
if (tvbr->len != 6) {
WSLUA_ERROR(TvbRange_ether,"The range must be 6 bytes long");
return 0;
}
addr = g_new(address,1);
buff = (guint8 *)tvb_memdup(NULL,tvbr->tvb->ws_tvb,tvbr->offset,tvbr->len);
SET_ADDRESS(addr, AT_ETHER, 6, buff);
pushAddress(L,addr);
WSLUA_RETURN(1); /* The Ethernet Address */
}
开发者ID:jelmer，项目名称:wireshark，代码行数:26，代码来源:wslua_tvb.c
示例4: TvbRange_ipv4
WSLUA_METHOD TvbRange_ipv4(lua_State* L) {
/* Get an IPv4 Address from a `TvbRange`, as an `Address` object. */
TvbRange tvbr = checkTvbRange(L,1);
Address addr;
guint32* ip_addr;
if ( !(tvbr && tvbr->tvb)) return 0;
if (tvbr->tvb->expired) {
luaL_error(L,"expired tvb");
return 0;
}
if (tvbr->len != 4) {
WSLUA_ERROR(TvbRange_ipv4,"The range must be 4 octets long");
return 0;
}
addr = (address *)g_malloc(sizeof(address));
ip_addr = (guint32 *)g_malloc(sizeof(guint32));
*ip_addr = tvb_get_ipv4(tvbr->tvb->ws_tvb,tvbr->offset);
set_address(addr, AT_IPv4, 4, ip_addr);
pushAddress(L,addr);
WSLUA_RETURN(1); /* The IPv4 `Address` object. */
}
开发者ID:linshimiao，项目名称:wireshark，代码行数:27，代码来源:wslua_tvb.c
示例5: pushStackFrameHeader
//***************************************************************************
void pushStackFrameHeader(int32_t oldLevel, int32_t newLevel)
{
//-----------------------------------
// Make space for the return value...
pushInteger(0);
StackFrameHeaderPtr headerPtr = (StackFrameHeaderPtr)stackFrameBasePtr;
//----------------------------------------------------------------------
// STATIC LINK
// Currently, let's not allow functions defined within functions. Assume
// the old scope level equals the new scope level, for now.
if(newLevel == -1)
{
//--------------------------------------------------------------------
// Calling a library function, so push a nullptr static link since
// it's scope is in a different module than the calling function.
// Note that global variables in libraries should be STATIC, otherwise
// they're never in scope! Weird "feature" which we may want
// to fix later...
pushAddress(nullptr);
}
else if(newLevel == oldLevel + 1)
{
//----------------------------------------------------------------
// Calling a routine nested within the caller, so push the pointer
// to the caller's stack frame. In ABL, as currently defined
// (2/22/96), this should only be when a module's code section is
// calling a function...
pushAddress((Address)headerPtr);
}
else if(newLevel == oldLevel)
{
//---------------------------------------------------------------
// Calling a function at the same scope level. We like that! Push
// pointer to stack frame of their common parent...
pushAddress(headerPtr->staticLink.address);
}
else
{
//-------------------------------------------------------
// Oops. We don't want nested functions, for now, in ABL.
runtimeError(ABL_ERR_RUNTIME_NESTED_FUNCTION_CALL);
}
pushAddress((Address)stackFrameBasePtr);
//---------------------------
// Push the return address...
pushAddress(0);
}
开发者ID:BobrDobr69，项目名称:mechcommander2，代码行数:48，代码来源:ablexec.cpp
示例6: Pinfo_get_lo
/* WSLUA_ATTRIBUTE Pinfo_lo RO lower Address of this Packet. */
static int Pinfo_get_lo(lua_State *L) {
Pinfo pinfo = checkPinfo(L,1);
Address addr;
addr = (Address)g_malloc(sizeof(address));
if (cmp_address(&(pinfo->ws_pinfo->src), &(pinfo->ws_pinfo->dst) ) < 0) {
copy_address(addr, &(pinfo->ws_pinfo->src));
} else {
copy_address(addr, &(pinfo->ws_pinfo->dst));
}
pushAddress(L,addr);
return 1;
}
开发者ID:DuLerWeil，项目名称:wireshark，代码行数:15，代码来源:wslua_pinfo.c
示例7: Pinfo_get_hi
/* WSLUA_ATTRIBUTE Pinfo_hi RW higher Address of this Packet. */
static int Pinfo_get_hi(lua_State *L) {
Pinfo pinfo = checkPinfo(L,1);
Address addr;
addr = (Address)g_malloc(sizeof(address));
if (CMP_ADDRESS(&(pinfo->ws_pinfo->src), &(pinfo->ws_pinfo->dst) ) >= 0) {
COPY_ADDRESS(addr, &(pinfo->ws_pinfo->src));
} else {
COPY_ADDRESS(addr, &(pinfo->ws_pinfo->dst));
}
pushAddress(L,addr);
return 1;
}
开发者ID:mACH1VO，项目名称:wireshark，代码行数:15，代码来源:wslua_pinfo.c
示例8: execConstant
TypePtr execConstant(SymTableNodePtr idPtr)
{
TypePtr typePtr = idPtr->typePtr;
if ((typePtr == IntegerTypePtr) || (typePtr->form == FRM_ENUM))
pushInteger(idPtr->defn.info.constant.value.integer);
else if (typePtr == RealTypePtr)
pushReal(idPtr->defn.info.constant.value.real);
else if (typePtr == CharTypePtr)
pushInteger(idPtr->defn.info.constant.value.character);
else if (typePtr->form == FRM_ARRAY)
pushAddress(idPtr->defn.info.constant.value.stringPtr);
if (debugger)
debugger->traceDataFetch(idPtr, typePtr, tos);
getCodeToken();
return (typePtr);
}
开发者ID:mechasource，项目名称:mechcommander2，代码行数:16，代码来源:ablxexpr.cpp
示例9: TvbRange_ether
WSLUA_METHOD TvbRange_ether(lua_State* L) {
/* Get an Ethernet Address from a `TvbRange`, as an `Address` object. */
TvbRange tvbr = checkTvbRange(L,1);
Address addr;
if ( !(tvbr && tvbr->tvb)) return 0;
if (tvbr->tvb->expired) {
luaL_error(L,"expired tvb");
return 0;
}
if (tvbr->len != 6) {
WSLUA_ERROR(TvbRange_ether,"The range must be 6 bytes long");
return 0;
}
addr = g_new(address,1);
alloc_address_tvb(NULL,addr,AT_ETHER,6,tvbr->tvb->ws_tvb,tvbr->offset);
pushAddress(L,addr);
WSLUA_RETURN(1); /* The Ethernet `Address` object. */
}
开发者ID:DHODoS，项目名称:wireshark，代码行数:22，代码来源:wslua_tvb.c
示例10: TvbRange_le_ipv4
WSLUA_METHOD TvbRange_le_ipv4(lua_State* L) {
/* Get an Little Endian IPv4 Address from a `TvbRange`, as an `Address` object. */
TvbRange tvbr = checkTvbRange(L,1);
Address addr;
guint32 ip_addr;
if ( !(tvbr && tvbr->tvb)) return 0;
if (tvbr->tvb->expired) {
luaL_error(L,"expired tvb");
return 0;
}
if (tvbr->len != 4) {
WSLUA_ERROR(TvbRange_ipv4,"The range must be 4 octets long");
return 0;
}
addr = g_new(address,1);
ip_addr = GUINT32_SWAP_LE_BE(tvb_get_ipv4(tvbr->tvb->ws_tvb,tvbr->offset));
alloc_address_wmem(NULL, addr, AT_IPv4, sizeof(ip_addr), &ip_addr);
pushAddress(L,addr);
WSLUA_RETURN(1); /* The IPv4 `Address` object. */
}
开发者ID:DHODoS，项目名称:wireshark，代码行数:24，代码来源:wslua_tvb.c
示例11: FieldInfo__call
WSLUA_METAMETHOD FieldInfo__call(lua_State* L) {
/*
Obtain the Value of the field
*/
FieldInfo fi = checkFieldInfo(L,1);
switch(fi->hfinfo->type) {
case FT_BOOLEAN:
lua_pushboolean(L,(int)fvalue_get_uinteger(&(fi->value)));
return 1;
case FT_UINT8:
case FT_UINT16:
case FT_UINT24:
case FT_UINT32:
case FT_FRAMENUM:
lua_pushnumber(L,(lua_Number)fvalue_get_uinteger(&(fi->value)));
return 1;
case FT_INT8:
case FT_INT16:
case FT_INT24:
case FT_INT32:
lua_pushnumber(L,(lua_Number)fvalue_get_sinteger(&(fi->value)));
return 1;
case FT_FLOAT:
case FT_DOUBLE:
lua_pushnumber(L,(lua_Number)fvalue_get_floating(&(fi->value)));
return 1;
case FT_INT64: {
Int64 num = (Int64)g_malloc(sizeof(gint64));
*num = fvalue_get_integer64(&(fi->value));
pushInt64(L,num);
return 1;
}
case FT_UINT64: {
UInt64 num = (UInt64)g_malloc(sizeof(guint64));
*num = fvalue_get_integer64(&(fi->value));
pushUInt64(L,num);
return 1;
}
case FT_ETHER: {
Address eth = (Address)g_malloc(sizeof(address));
eth->type = AT_ETHER;
eth->len = fi->length;
eth->data = tvb_memdup(NULL,fi->ds_tvb,fi->start,fi->length);
pushAddress(L,eth);
return 1;
}
case FT_IPv4:{
Address ipv4 = (Address)g_malloc(sizeof(address));
ipv4->type = AT_IPv4;
ipv4->len = fi->length;
ipv4->data = tvb_memdup(NULL,fi->ds_tvb,fi->start,fi->length);
pushAddress(L,ipv4);
return 1;
}
case FT_IPv6: {
Address ipv6 = (Address)g_malloc(sizeof(address));
ipv6->type = AT_IPv6;
ipv6->len = fi->length;
ipv6->data = tvb_memdup(NULL,fi->ds_tvb,fi->start,fi->length);
pushAddress(L,ipv6);
return 1;
}
case FT_IPXNET:{
Address ipx = (Address)g_malloc(sizeof(address));
ipx->type = AT_IPX;
ipx->len = fi->length;
ipx->data = tvb_memdup(NULL,fi->ds_tvb,fi->start,fi->length);
pushAddress(L,ipx);
return 1;
}
case FT_ABSOLUTE_TIME:
case FT_RELATIVE_TIME: {
NSTime nstime = (NSTime)g_malloc(sizeof(nstime_t));
*nstime = *(NSTime)fvalue_get(&(fi->value));
pushNSTime(L,nstime);
return 1;
}
case FT_STRING:
case FT_STRINGZ: {
gchar* repr = fvalue_to_string_repr(&fi->value,FTREPR_DISPLAY,NULL);
if (repr)
lua_pushstring(L,repr);
else
luaL_error(L,"field cannot be represented as string because it may contain invalid characters");
return 1;
}
case FT_NONE:
if (fi->length == 0) {
lua_pushnil(L);
return 1;
}
/* FALLTHROUGH */
case FT_BYTES:
case FT_UINT_BYTES:
case FT_GUID:
case FT_PROTOCOL:
case FT_REL_OID:
case FT_SYSTEM_ID:
//.........这里部分代码省略.........
开发者ID:pvons，项目名称:wireshark，代码行数:101，代码来源:wslua_field.c
示例12: execVariable
TypePtr execVariable(SymTableNodePtr idPtr, UseType use)
{
TypePtr typePtr = (TypePtr)(idPtr->typePtr);
// First, point to the variable's stack item. If the variable's scope
// level is less than the current scope level, follow the static links
// to the proper stack frame base...
StackItemPtr dataPtr = nullptr;
StackItem tempStackItem;
switch (idPtr->defn.info.data.varType)
{
case VAR_TYPE_NORMAL:
{
StackFrameHeaderPtr headerPtr = (StackFrameHeaderPtr)stackFrameBasePtr;
int32_t delta = level - idPtr->level;
while (delta-- > 0)
headerPtr = (StackFrameHeaderPtr)headerPtr->staticLink.address;
dataPtr = (StackItemPtr)headerPtr + idPtr->defn.info.data.offset;
}
break;
case VAR_TYPE_ETERNAL:
dataPtr = (StackItemPtr)stack + idPtr->defn.info.data.offset;
break;
case VAR_TYPE_STATIC:
//---------------------------------------------------------
// If we're referencing a library's static variable, we may
// need to shift to its static data space temporarily...
if (idPtr->library && (idPtr->library != CurModule))
StaticDataPtr = idPtr->library->getStaticData();
dataPtr = (StackItemPtr)StaticDataPtr + idPtr->defn.info.data.offset;
if (idPtr->library && (idPtr->library != CurModule))
StaticDataPtr = CurModule->getStaticData();
break;
case VAR_TYPE_REGISTERED:
tempStackItem.address = (PSTR)idPtr->defn.info.data.registeredData;
dataPtr = &tempStackItem;
break;
}
//---------------------------------------------------------------
// If it's a scalar or enumeration reference parameter, that item
// points to the actual item...
if (idPtr->defn.key == DFN_REFPARAM)
if (typePtr->form != FRM_ARRAY) /* && (typePtr->form != FRM_RECORD)*/
dataPtr = (StackItemPtr)dataPtr->address;
ABL_Assert(dataPtr != nullptr, 0, " ABL.execVariable(): dataPtr is nullptr ");
//-----------------------------------------------------
// Now, push the address of the variable's data area...
if ((typePtr->form == FRM_ARRAY) /*|| (typePtr->form == FRM_RECORD)*/)
{
// pushInteger(typePtr->size);
pushAddress((Address)dataPtr->address);
}
else if (idPtr->defn.info.data.varType == VAR_TYPE_REGISTERED)
pushAddress((Address)dataPtr->address);
else
pushAddress((Address)dataPtr);
//-----------------------------------------------------------------------------------
// If there is a subscript (or field identifier, if records are being used
// in ABL) then modify the address to point to the proper element of the
// array (or record)...
getCodeToken();
while ((codeToken == TKN_LBRACKET) /*|| (codeTOken == TKN_PERIOD)*/)
{
// if (codeToken == TKN_LBRACKET)
typePtr = execSubscripts(typePtr);
// else if (codeToken == TKN_PERIOD)
// typePtr = execField(typePtr);
}
//------------------------------------------------------------
// Leave the modified address on the top of the stack if:
// a) it's an assignment target;
// b) it reresents a parameter passed by reference;
// c) it's the address of an array or record;
// Otherwise, replace the address with the value it points to.
if ((use != USE_TARGET) && (use != USE_REFPARAM) && (typePtr->form != FRM_ARRAY))
{
if ((typePtr == IntegerTypePtr) || (typePtr->form == FRM_ENUM))
{
tos->integer = *((int32_t*)tos->address);
}
else if (typePtr == CharTypePtr)
tos->byte = *((PSTR)tos->address);
else
tos->real = *((float*)tos->address);
}
if (debugger)
{
if ((use != USE_TARGET) && (use != USE_REFPARAM))
{
if (typePtr->form == FRM_ARRAY)
debugger->traceDataFetch(idPtr, typePtr, (StackItemPtr)tos->address);
else
debugger->traceDataFetch(idPtr, typePtr, tos);
}
}
return (typePtr);
}
开发者ID:mechasource，项目名称:mechcommander2，代码行数:96，代码来源:ablxexpr.cpp
示例13: execFactor
TypePtr execFactor(void)
{
TypePtr resultTypePtr = nullptr;
switch (codeToken)
{
case TKN_IDENTIFIER:
{
SymTableNodePtr idPtr = getCodeSymTableNodePtr();
if (idPtr->defn.key == DFN_FUNCTION)
{
SymTableNodePtr thisRoutineIdPtr = CurRoutineIdPtr;
resultTypePtr = execRoutineCall(idPtr, false);
CurRoutineIdPtr = thisRoutineIdPtr;
}
else if (idPtr->defn.key == DFN_CONST)
resultTypePtr = execConstant(idPtr);
else
resultTypePtr = execVariable(idPtr, USE_EXPR);
}
break;
case TKN_NUMBER:
{
SymTableNodePtr numberPtr = getCodeSymTableNodePtr();
if (numberPtr->typePtr == IntegerTypePtr)
{
pushInteger(numberPtr->defn.info.constant.value.integer);
resultTypePtr = IntegerTypePtr;
}
else
{
pushReal(numberPtr->defn.info.constant.value.real);
resultTypePtr = RealTypePtr;
}
getCodeToken();
}
break;
case TKN_STRING:
{
SymTableNodePtr nodePtr = getCodeSymTableNodePtr();
int32_t length = strlen(nodePtr->name);
if (length > 1)
{
//-----------------------------------------------------------------------
// Remember, the double quotes are on the back and front of the
// string...
pushAddress(nodePtr->info);
resultTypePtr = nodePtr->typePtr;
}
else
{
//----------------------------------------------
// Just push the one character in this string...
pushByte(nodePtr->name[0]);
resultTypePtr = CharTypePtr;
}
getCodeToken();
}
break;
case TKN_NOT:
getCodeToken();
resultTypePtr = execFactor();
//--------------------------------------
// Following flips 1 to 0, and 0 to 1...
tos->integer = 1 - tos->integer;
break;
case TKN_LPAREN:
getCodeToken();
resultTypePtr = execExpression();
getCodeToken();
break;
}
return (resultTypePtr);
}
开发者ID:mechasource，项目名称:mechcommander2，代码行数:73，代码来源:ablxexpr.cpp
示例14: wslua_eth_to_table
static void wslua_eth_to_table(lua_State* L, const void* p) { eth_hdr* v = (void*)p; lua_newtable(L);
lua_pushstring(L,"dst"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->dst)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"src"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->src)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"type"); lua_pushnumber(L,(lua_Number)v->type); lua_settable(L,-3);
}
开发者ID:hubolo，项目名称:wireshark-1.8.0，代码行数:5，代码来源:taps_wslua.c
示例15: wslua_udp_to_table
static void wslua_udp_to_table(lua_State* L, const void* p) { e_udphdr* v = (void*)p; lua_newtable(L);
lua_pushstring(L,"ip_dst"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->ip_dst)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"ip_src"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->ip_src)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"uh_dport"); lua_pushnumber(L,(lua_Number)v->uh_dport); lua_settable(L,-3);
lua_pushstring(L,"uh_sport"); lua_pushnumber(L,(lua_Number)v->uh_sport); lua_settable(L,-3);
lua_pushstring(L,"uh_sum"); lua_pushnumber(L,(lua_Number)v->uh_sum); lua_settable(L,-3);
lua_pushstring(L,"uh_sum_cov"); lua_pushnumber(L,(lua_Number)v->uh_sum_cov); lua_settable(L,-3);
lua_pushstring(L,"uh_ulen"); lua_pushnumber(L,(lua_Number)v->uh_ulen); lua_settable(L,-3);
}
开发者ID:hubolo，项目名称:wireshark-1.8.0，代码行数:9，代码来源:taps_wslua.c
示例16: wslua_tcp_to_table
static void wslua_tcp_to_table(lua_State* L, const void* p) { tcp_info_t* v = (void*)p; lua_newtable(L);
lua_pushstring(L,"ip_dst"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->ip_dst)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"ip_src"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->ip_src)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"th_ack"); lua_pushnumber(L,(lua_Number)v->th_ack); lua_settable(L,-3);
lua_pushstring(L,"th_dport"); lua_pushnumber(L,(lua_Number)v->th_dport); lua_settable(L,-3);
lua_pushstring(L,"th_flags"); lua_pushnumber(L,(lua_Number)v->th_flags); lua_settable(L,-3);
lua_pushstring(L,"th_have_seglen"); lua_pushboolean(L,(int)v->th_have_seglen); lua_settable(L,-3);
lua_pushstring(L,"th_hlen"); lua_pushnumber(L,(lua_Number)v->th_hlen); lua_settable(L,-3);
lua_pushstring(L,"th_seglen"); lua_pushnumber(L,(lua_Number)v->th_seglen); lua_settable(L,-3);
lua_pushstring(L,"th_seq"); lua_pushnumber(L,(lua_Number)v->th_seq); lua_settable(L,-3);
lua_pushstring(L,"th_sport"); lua_pushnumber(L,(lua_Number)v->th_sport); lua_settable(L,-3);
lua_pushstring(L,"th_stream"); lua_pushnumber(L,(lua_Number)v->th_stream); lua_settable(L,-3);
lua_pushstring(L,"th_win"); lua_pushnumber(L,(lua_Number)v->th_win); lua_settable(L,-3);
}
开发者ID:hubolo，项目名称:wireshark-1.8.0，代码行数:14，代码来源:taps_wslua.c
示例17: wslua_ip_to_table
static void wslua_ip_to_table(lua_State* L, const void* p) { ws_ip* v = (void*)p; lua_newtable(L);
lua_pushstring(L,"ip_dst"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->ip_dst)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"ip_id"); lua_pushnumber(L,(lua_Number)v->ip_id); lua_settable(L,-3);
lua_pushstring(L,"ip_len"); lua_pushnumber(L,(lua_Number)v->ip_len); lua_settable(L,-3);
lua_pushstring(L,"ip_off"); lua_pushnumber(L,(lua_Number)v->ip_off); lua_settable(L,-3);
lua_pushstring(L,"ip_p"); lua_pushnumber(L,(lua_Number)v->ip_p); lua_settable(L,-3);
lua_pushstring(L,"ip_src"); { Address a = g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->ip_src)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"ip_sum"); lua_pushnumber(L,(lua_Number)v->ip_sum); lua_settable(L,-3);
lua_pushstring(L,"ip_tos"); lua_pushnumber(L,(lua_Number)v->ip_tos); lua_settable(L,-3);
lua_pushstring(L,"ip_ttl"); lua_pushnumber(L,(lua_Number)v->ip_ttl); lua_settable(L,-3);
lua_pushstring(L,"ip_v_hl"); lua_pushnumber(L,(lua_Number)v->ip_v_hl); lua_settable(L,-3);
}
开发者ID:hubolo，项目名称:wireshark-1.8.0，代码行数:12，代码来源:taps_wslua.c
示例18: pushInteger
int32_t ABLModule::execute(ABLParamPtr moduleParamList, SymTableNodePtr functionIdPtr)
{
CurModule = this;
if(debugger)
debugger->setModule(this);
//--------------------------
// Execute the ABL module...
SymTableNodePtr moduleIdPtr = ModuleRegistry[handle].moduleIdPtr;
if(moduleIdPtr->defn.info.routine.flags & ROUTINE_FLAG_FSM)
CurFSM = this;
else
CurFSM = nullptr;
NumStateTransitions = 0;
//--------------------------------------------
// Point to this module's static data space...
StaticDataPtr = staticData;
OrderCompletionFlags = orderCallFlags;
//---------------------------------
// Init some important variables...
CurModuleIdPtr = nullptr;
CurRoutineIdPtr = nullptr;
FileNumber = -1;
errorCount = 0;
execStatementCount = 0;
NumExecutions++;
NewStateSet = false;
//------------------
// Init the stack...
stackFrameBasePtr = tos = (stack + eternalOffset);
//---------------------------------------
// Initialize the module's stack frame...
level = 1;
CallStackLevel = 0;
stackFrameBasePtr = tos + 1;
//-------------------------
// Function return value...
pushInteger(0);
//---------------
// Static Link...
pushAddress(nullptr);
//----------------
// Dynamic Link...
pushAddress(nullptr);
//------------------
// Return Address...
pushAddress(nullptr);
//initDebugger();
//----------
// Run it...
if(moduleParamList)
{
//------------------------------------------------------------------------------
// NOTE: Currently, parameter passing of arrays is not functioning. This MUST be
// done...
int32_t curParam = 0;
for(SymTableNodePtr formalIdPtr = (SymTableNodePtr)(moduleIdPtr->defn.info.routine.params);
formalIdPtr != nullptr;
formalIdPtr = formalIdPtr->next)
{
TypePtr formalTypePtr = (TypePtr)(formalIdPtr->typePtr);
if(formalIdPtr->defn.key == DFN_VALPARAM)
{
if(formalTypePtr == RealTypePtr)
{
if(moduleParamList[curParam].type == ABL_PARAM_INTEGER)
{
//---------------------------------------------
// Real formal parameter, but integer actual...
pushReal((float)(moduleParamList[curParam].integer));
}
else if(moduleParamList[curParam].type == ABL_PARAM_REAL)
pushReal(moduleParamList[curParam].real);
}
else if(formalTypePtr == IntegerTypePtr)
{
if(moduleParamList[curParam].type == ABL_PARAM_INTEGER)
pushInteger(moduleParamList[curParam].integer);
else
return(0);
}
//----------------------------------------------------------
// Formal parameter is an array or record, so make a copy...
if((formalTypePtr->form == FRM_ARRAY)/* || (formalTypePtr->form == FRM_RECORD)*/)
{
//------------------------------------------------------------------------------
// The following is a little inefficient, but is kept this way to keep it clear.
// Once it's verified to work, optimize...
int32_t size = formalTypePtr->size;
PSTR dest = (PSTR)ABLStackMallocCallback((size_t)size);
if(!dest)
{
char err[255];
sprintf(err, "ABL: Unable to AblStackHeap->malloc array parameter [Module %d]", id);
ABL_Fatal(0, err);
}
PSTR src = tos->address;
PSTR savePtr = dest;
memcpy(dest, src, size);
tos->address = savePtr;
}
//.........这里部分代码省略.........
开发者ID:BobrDobr69，项目名称:mechcommander2，代码行数:101，代码来源:ablenv.cpp
示例19: FieldInfo__call
/* WSLUA_ATTRIBUTE FieldInfo_value RO The value of this field. */
WSLUA_METAMETHOD FieldInfo__call(lua_State* L) {
/*
Obtain the Value of the field.
Previous to 1.11.4, this function retrieved the value for most field types,
but for `ftypes.UINT_BYTES` it retrieved the `ByteArray` of the field's entire `TvbRange`.
In other words, it returned a `ByteArray` that included the leading length byte(s),
instead of just the *value* bytes. That was a bug, and has been changed in 1.11.4.
Furthermore, it retrieved an `ftypes.GUID` as a `ByteArray`, which is also incorrect.
If you wish to still get a `ByteArray` of the `TvbRange`, use `FieldInfo:get_range()`
to get the `TvbRange`, and then use `Tvb:bytes()` to convert it to a `ByteArray`.
*/
FieldInfo fi = checkFieldInfo(L,1);
switch(fi->ws_fi->hfinfo->type) {
case FT_BOOLEAN:
lua_pushboolean(L,(int)fvalue_get_uinteger(&(fi->ws_fi->value)));
return 1;
case FT_UINT8:
case FT_UINT16:
case FT_UINT24:
case FT_UINT32:
case FT_FRAMENUM:
lua_pushnumber(L,(lua_Number)(fvalue_get_uinteger(&(fi->ws_fi->value))));
return 1;
case FT_INT8:
case FT_INT16:
case FT_INT24:
case FT_INT32:
lua_pushnumber(L,(lua_Number)(fvalue_get_sinteger(&(fi->ws_fi->value))));
return 1;
case FT_FLOAT:
case FT_DOUBLE:
lua_pushnumber(L,(lua_Number)(fvalue_get_floating(&(fi->ws_fi->value))));
return 1;
case FT_INT64: {
pushInt64(L,(Int64)(fvalue_get_sinteger64(&(fi->ws_fi->value))));
return 1;
}
case FT_UINT64: {
pushUInt64(L,fvalue_get_uinteger64(&(fi->ws_fi->value)));
return 1;
}
case FT_ETHER: {
Address eth = (Address)g_malloc(sizeof(address));
eth->type = AT_ETHER;
eth->len = fi->ws_fi->length;
eth->data = tvb_memdup(NULL,fi->ws_fi->ds_tvb,fi->ws_fi->start,fi->ws_fi->length);
pushAddress(L,eth);
return 1;
}
case FT_IPv4:{
Address ipv4 = (Address)g_malloc(sizeof(address));
ipv4->type = AT_IPv4;
ipv4->len = fi->ws_fi->length;
ipv4->data = tvb_memdup(NULL,fi->ws_fi->ds_tvb,fi->ws_fi->start,fi->ws_fi->length);
pushAddress(L,ipv4);
return 1;
}
case FT_IPv6: {
Address ipv6 = (Address)g_malloc(sizeof(address));
ipv6->type = AT_IPv6;
ipv6->len = fi->ws_fi->length;
ipv6->data = tvb_memdup(NULL,fi->ws_fi->ds_tvb,fi->ws_fi->start,fi->ws_fi->length);
pushAddress(L,ipv6);
return 1;
}
case FT_FCWWN: {
Address fcwwn = (Address)g_malloc(sizeof(address));
fcwwn->type = AT_FCWWN;
fcwwn->len = fi->ws_fi->length;
fcwwn->data = tvb_memdup(NULL,fi->ws_fi->ds_tvb,fi->ws_fi->start,fi->ws_fi->length);
pushAddress(L,fcwwn);
return 1;
}
case FT_IPXNET:{
Address ipx = (Address)g_malloc(sizeof(address));
ipx->type = AT_IPX;
ipx->len = fi->ws_fi->length;
ipx->data = tvb_memdup(NULL,fi->ws_fi->ds_tvb,fi->ws_fi->start,fi->ws_fi->length);
pushAddress(L,ipx);
return 1;
}
case FT_ABSOLUTE_TIME:
case FT_RELATIVE_TIME: {
NSTime nstime = (NSTime)g_malloc(sizeof(nstime_t));
*nstime = *(NSTime)fvalue_get(&(fi->ws_fi->value));
pushNSTime(L,nstime);
return 1;
}
case FT_STRING:
case FT_STRINGZ: {
gchar* repr = fvalue_to_string_repr(&fi->ws_fi->value,FTREPR_DISPLAY,BASE_NONE,NULL);
if (repr)
lua_pushstring(L,repr);
else
luaL_error(L,"field cannot be represented as string because it may contain invalid characters");
//.........这里部分代码省略.........
开发者ID:MultipathDTLS，项目名称:wireshark，代码行数:101，代码来源:wslua_field.c
示例20: wslua_wlan_to_table
static void wslua_wlan_to_table(lua_State* L, const void* p) { const wlan_hdr_t* v _U_; v = (const wlan_hdr_t*)p; lua_newtable(L);
lua_pushstring(L,"bssid"); { Address a = (Address)g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->bssid)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"dst"); { Address a = (Address)g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->dst)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"src"); { Address a = (Address)g_malloc(sizeof(address)); COPY_ADDRESS(a, &(v->src)); pushAddress(L,a); } lua_settable(L,-3);
lua_pushstring(L,"type"); lua_pushnumber(L,(lua_Number)v->type); lua_settable(L,-3);
}
开发者ID:Nicholas1126，项目名称:wireshark-ex，代码行数:6，代码来源:taps_wslua.c
注：本文中的pushAddress函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论