本文整理汇总了C++中pskb_expand_head函数的典型用法代码示例。如果您正苦于以下问题:C++ pskb_expand_head函数的具体用法?C++ pskb_expand_head怎么用?C++ pskb_expand_head使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pskb_expand_head函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rmnet_map_egress_handler
static int rmnet_map_egress_handler(struct sk_buff *skb,
struct rmnet_port *port, u8 mux_id,
struct net_device *orig_dev)
{
int required_headroom, additional_header_len;
struct rmnet_map_header *map_header;
additional_header_len = 0;
required_headroom = sizeof(struct rmnet_map_header);
if (port->data_format & RMNET_FLAGS_EGRESS_MAP_CKSUMV4) {
additional_header_len = sizeof(struct rmnet_map_ul_csum_header);
required_headroom += additional_header_len;
}
if (skb_headroom(skb) < required_headroom) {
if (pskb_expand_head(skb, required_headroom, 0, GFP_ATOMIC))
return -ENOMEM;
}
if (port->data_format & RMNET_FLAGS_EGRESS_MAP_CKSUMV4)
rmnet_map_checksum_uplink_packet(skb, orig_dev);
map_header = rmnet_map_add_map_header(skb, additional_header_len, 0);
if (!map_header)
return -ENOMEM;
map_header->mux_id = mux_id;
skb->protocol = htons(ETH_P_MAP);
return 0;
}
开发者ID:AlexShiLucky,项目名称:linux,代码行数:33,代码来源:rmnet_handlers.c
示例2: make_writable
static int make_writable(struct sk_buff *skb, int write_len)
{
if (!skb_cloned(skb) || skb_clone_writable(skb, write_len))
return 0;
return pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
}
开发者ID:ninopy,项目名称:ovs-vxlan,代码行数:7,代码来源:actions.c
示例3: xfrm6_mode_tunnel_input
static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
{
int err = -EINVAL;
const unsigned char *old_mac;
if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6)
goto out;
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto out;
if (skb_cloned(skb) &&
(err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
goto out;
if (x->props.flags & XFRM_STATE_DECAP_DSCP)
ipv6_copy_dscp(ipv6_get_dsfield(ipv6_hdr(skb)),
ipipv6_hdr(skb));
if (!(x->props.flags & XFRM_STATE_NOECN))
ipip6_ecn_decapsulate(skb);
old_mac = skb_mac_header(skb);
skb_set_mac_header(skb, -skb->mac_len);
memmove(skb_mac_header(skb), old_mac, skb->mac_len);
skb_reset_network_header(skb);
err = 0;
out:
return err;
}
开发者ID:CSCLOG,项目名称:beaglebone,代码行数:29,代码来源:xfrm6_mode_tunnel.c
示例4: tipc_l2_send_msg
/**
* tipc_l2_send_msg - send a TIPC packet out over an L2 interface
* @skb: the packet to be sent
* @b: the bearer through which the packet is to be sent
* @dest: peer destination address
*/
int tipc_l2_send_msg(struct net *net, struct sk_buff *skb,
struct tipc_bearer *b, struct tipc_media_addr *dest)
{
struct net_device *dev;
int delta;
void *tipc_ptr;
dev = (struct net_device *)rcu_dereference_rtnl(b->media_ptr);
if (!dev)
return 0;
/* Send RESET message even if bearer is detached from device */
tipc_ptr = rcu_dereference_rtnl(dev->tipc_ptr);
if (unlikely(!tipc_ptr && !msg_is_reset(buf_msg(skb))))
goto drop;
delta = dev->hard_header_len - skb_headroom(skb);
if ((delta > 0) &&
pskb_expand_head(skb, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC))
goto drop;
skb_reset_network_header(skb);
skb->dev = dev;
skb->protocol = htons(ETH_P_TIPC);
dev_hard_header(skb, dev, ETH_P_TIPC, dest->value,
dev->dev_addr, skb->len);
dev_queue_xmit(skb);
return 0;
drop:
kfree_skb(skb);
return 0;
}
开发者ID:ironbox360,项目名称:linux-ubifs,代码行数:38,代码来源:bearer.c
示例5: tipc_l2_send_msg
/**
* tipc_l2_send_msg - send a TIPC packet out over an L2 interface
* @buf: the packet to be sent
* @b_ptr: the bearer through which the packet is to be sent
* @dest: peer destination address
*/
int tipc_l2_send_msg(struct sk_buff *buf, struct tipc_bearer *b,
struct tipc_media_addr *dest)
{
struct sk_buff *clone;
struct net_device *dev;
int delta;
dev = (struct net_device *)rcu_dereference_rtnl(b->media_ptr);
if (!dev)
return 0;
clone = skb_clone(buf, GFP_ATOMIC);
if (!clone)
return 0;
delta = dev->hard_header_len - skb_headroom(buf);
if ((delta > 0) &&
pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
kfree_skb(clone);
return 0;
}
skb_reset_network_header(clone);
clone->dev = dev;
clone->protocol = htons(ETH_P_TIPC);
dev_hard_header(clone, dev, ETH_P_TIPC, dest->value,
dev->dev_addr, clone->len);
dev_queue_xmit(clone);
return 0;
}
开发者ID:3null,项目名称:linux,代码行数:36,代码来源:bearer.c
示例6: i2400m_hard_start_xmit
/*
* Transmit a packet to the base station on behalf of the network stack
*
*
* Returns: NETDEV_TX_OK (always, even in case of error)
*
* In case of error, we just drop it. Reasons:
*
* - we add a hw header to each skb, and if the network stack
* retries, we have no way to know if that skb has it or not.
*
* - network protocols have their own drop-recovery mechanisms
*
* - there is not much else we can do
*
* If the device is idle, we need to wake it up; that is an operation
* that will sleep. See i2400m_net_wake_tx() for details.
*/
static
netdev_tx_t i2400m_hard_start_xmit(struct sk_buff *skb,
struct net_device *net_dev)
{
struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
struct device *dev = i2400m_dev(i2400m);
int result = -1;
d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
if (skb_header_cloned(skb) &&
pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
goto drop;
if (i2400m->state == I2400M_SS_IDLE)
result = i2400m_net_wake_tx(i2400m, net_dev, skb);
else
result = i2400m_net_tx(i2400m, net_dev, skb);
if (result < 0) {
drop:
net_dev->stats.tx_dropped++;
} else {
net_dev->stats.tx_packets++;
net_dev->stats.tx_bytes += skb->len;
}
dev_kfree_skb(skb);
d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
return NETDEV_TX_OK;
}
开发者ID:03199618,项目名称:linux,代码行数:47,代码来源:netdev.c
示例7: rmnet_map_egress_handler
/**
* rmnet_map_egress_handler() - MAP egress handler
* @skb: Packet being sent
* @config: Physical endpoint configuration for the egress device
* @ep: logical endpoint configuration of the packet originator
* (e.g.. RmNet virtual network device)
* @orig_dev: The originator vnd device
*
* Called if and only if MAP is configured in the egress device's egress data
* format. Will expand skb if there is insufficient headroom for MAP protocol.
* Note: headroomexpansion will incur a performance penalty.
*
* Return:
* - 0 on success
* - 1 on failure
*/
static int rmnet_map_egress_handler(struct sk_buff *skb,
struct rmnet_phys_ep_conf_s *config,
struct rmnet_logical_ep_conf_s *ep,
struct net_device *orig_dev)
{
int required_headroom, additional_header_length, ckresult;
struct rmnet_map_header_s *map_header;
additional_header_length = 0;
required_headroom = sizeof(struct rmnet_map_header_s);
if ((config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV3) ||
(config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV4)) {
required_headroom +=
sizeof(struct rmnet_map_ul_checksum_header_s);
additional_header_length +=
sizeof(struct rmnet_map_ul_checksum_header_s);
}
LOGD("headroom of %d bytes", required_headroom);
if (skb_headroom(skb) < required_headroom) {
if (pskb_expand_head(skb, required_headroom, 0, GFP_KERNEL)) {
LOGD("Failed to add headroom of %d bytes",
required_headroom);
return 1;
}
}
if ((config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV3) ||
(config->egress_data_format & RMNET_EGRESS_FORMAT_MAP_CKSUMV4)) {
ckresult = rmnet_map_checksum_uplink_packet
(skb, orig_dev, config->egress_data_format);
trace_rmnet_map_checksum_uplink_packet(orig_dev, ckresult);
rmnet_stats_ul_checksum(ckresult);
}
map_header = rmnet_map_add_map_header(skb, additional_header_length);
if (!map_header) {
LOGD("%s", "Failed to add MAP header to egress packet");
return 1;
}
if (config->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) {
if (ep->mux_id == 0xff)
map_header->mux_id = 0;
else
map_header->mux_id = ep->mux_id;
}
skb->protocol = htons(ETH_P_MAP);
if (config->egress_data_format & RMNET_EGRESS_FORMAT_AGGREGATION) {
rmnet_map_aggregate(skb, config);
return RMNET_MAP_CONSUMED;
}
return RMNET_MAP_SUCCESS;
}
开发者ID:BeastOn,项目名称:yu_msm8916,代码行数:76,代码来源:rmnet_data_handlers.c
示例8: nf_xfrm_me_harder
int nf_xfrm_me_harder(struct net *net, struct sk_buff *skb, unsigned int family)
{
struct flowi fl;
unsigned int hh_len;
struct dst_entry *dst;
int err;
err = xfrm_decode_session(skb, &fl, family);
if (err < 0)
return err;
dst = skb_dst(skb);
if (dst->xfrm)
dst = ((struct xfrm_dst *)dst)->route;
dst_hold(dst);
dst = xfrm_lookup(net, dst, &fl, skb->sk, 0);
if (IS_ERR(dst))
return PTR_ERR(dst);
skb_dst_drop(skb);
skb_dst_set(skb, dst);
/* Change in oif may mean change in hh_len. */
hh_len = skb_dst(skb)->dev->hard_header_len;
if (skb_headroom(skb) < hh_len &&
pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
return -ENOMEM;
return 0;
}
开发者ID:acton393,项目名称:linux,代码行数:30,代码来源:nf_nat_core.c
示例9: tcf_pedit
static int tcf_pedit(struct sk_buff *skb, const struct tc_action *a,
struct tcf_result *res)
{
struct tcf_pedit *p = a->priv;
int i, munged = 0;
unsigned int off;
if (skb_cloned(skb) &&
pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
return p->tcf_action;
off = skb_network_offset(skb);
spin_lock(&p->tcf_lock);
p->tcf_tm.lastuse = jiffies;
if (p->tcfp_nkeys > 0) {
struct tc_pedit_key *tkey = p->tcfp_keys;
for (i = p->tcfp_nkeys; i > 0; i--, tkey++) {
u32 *ptr, _data;
int offset = tkey->off;
if (tkey->offmask) {
char *d, _d;
d = skb_header_pointer(skb, off + tkey->at, 1,
&_d);
if (!d)
goto bad;
offset += (*d & tkey->offmask) >> tkey->shift;
}
if (offset % 4) {
pr_info("tc filter pedit"
" offset must be on 32 bit boundaries\n");
goto bad;
}
if (offset > 0 && offset > skb->len) {
pr_info("tc filter pedit"
" offset %d can't exceed pkt length %d\n",
offset, skb->len);
goto bad;
}
ptr = skb_header_pointer(skb, off + offset, 4, &_data);
if (!ptr)
goto bad;
/* just do it, baby */
*ptr = ((*ptr & tkey->mask) ^ tkey->val);
if (ptr == &_data)
skb_store_bits(skb, off + offset, ptr, 4);
munged++;
}
if (munged)
skb->tc_verd = SET_TC_MUNGED(skb->tc_verd);
goto done;
} else
开发者ID:adis1313,项目名称:android_kernel_samsung_msm8974,代码行数:60,代码来源:act_pedit.c
示例10: ip_vs_make_skb_writable
int ip_vs_make_skb_writable(struct sk_buff **pskb, int writable_len)
{
struct sk_buff *skb = *pskb;
/* skb is already used, better copy skb and its payload */
if (unlikely(skb_shared(skb) || skb->sk))
goto copy_skb;
/* skb data is already used, copy it */
if (unlikely(skb_cloned(skb)))
goto copy_data;
return pskb_may_pull(skb, writable_len);
copy_data:
if (unlikely(writable_len > skb->len))
return 0;
return !pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
copy_skb:
if (unlikely(writable_len > skb->len))
return 0;
skb = skb_copy(skb, GFP_ATOMIC);
if (!skb)
return 0;
BUG_ON(skb_is_nonlinear(skb));
/* Rest of kernel will get very unhappy if we pass it a
suddenly-orphaned skbuff */
if ((*pskb)->sk)
skb_set_owner_w(skb, (*pskb)->sk);
kfree_skb(*pskb);
*pskb = skb;
return 1;
}
开发者ID:smx-smx,项目名称:dsl-n55u,代码行数:35,代码来源:ip_vs_core.c
示例11: bpf_dp_ctx_init
static int bpf_dp_ctx_init(struct bpf_dp_context *ctx)
{
struct ovs_key_ipv4_tunnel *tun_key = OVS_CB(ctx->skb)->tun_key;
if (skb_headroom(ctx->skb) < 64) {
if (pskb_expand_head(ctx->skb, 64, 0, GFP_ATOMIC))
return -ENOMEM;
}
ctx->context.length = ctx->skb->len;
ctx->context.vlan_tag = vlan_tx_tag_present(ctx->skb) ?
vlan_tx_tag_get(ctx->skb) : 0;
ctx->context.hw_csum = (ctx->skb->ip_summed == CHECKSUM_PARTIAL);
if (tun_key) {
ctx->context.tun_key.tun_id =
be32_to_cpu(be64_get_low32(tun_key->tun_id));
ctx->context.tun_key.src_ip = be32_to_cpu(tun_key->ipv4_src);
ctx->context.tun_key.dst_ip = be32_to_cpu(tun_key->ipv4_dst);
ctx->context.tun_key.tos = tun_key->ipv4_tos;
ctx->context.tun_key.ttl = tun_key->ipv4_ttl;
} else {
memset(&ctx->context.tun_key, 0,
sizeof(struct bpf_ipv4_tun_key));
}
return 0;
}
开发者ID:iovisor-obsolete,项目名称:old_bpf_historical,代码行数:26,代码来源:bpf_plum.c
示例12: rmnet_map_egress_handler
static int rmnet_map_egress_handler(struct sk_buff *skb,
struct rmnet_port *port, u8 mux_id,
struct net_device *orig_dev)
{
int required_headroom, additional_header_len;
struct rmnet_map_header *map_header;
additional_header_len = 0;
required_headroom = sizeof(struct rmnet_map_header);
if (skb_headroom(skb) < required_headroom) {
if (pskb_expand_head(skb, required_headroom, 0, GFP_KERNEL))
return RMNET_MAP_CONSUMED;
}
map_header = rmnet_map_add_map_header(skb, additional_header_len, 0);
if (!map_header)
return RMNET_MAP_CONSUMED;
if (port->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) {
if (mux_id == 0xff)
map_header->mux_id = 0;
else
map_header->mux_id = mux_id;
}
skb->protocol = htons(ETH_P_MAP);
return RMNET_MAP_SUCCESS;
}
开发者ID:SantoshShilimkar,项目名称:linux,代码行数:30,代码来源:rmnet_handlers.c
示例13: ip_xfrm_me_harder
int ip_xfrm_me_harder(struct sk_buff *skb)
{
struct flowi fl;
unsigned int hh_len;
struct dst_entry *dst;
if (IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED)
return 0;
if (xfrm_decode_session(skb, &fl, AF_INET) < 0)
return -1;
dst = skb->dst;
if (dst->xfrm)
dst = ((struct xfrm_dst *)dst)->route;
dst_hold(dst);
if (xfrm_lookup(&dst, &fl, skb->sk, 0) < 0)
return -1;
dst_release(skb->dst);
skb->dst = dst;
/* Change in oif may mean change in hh_len. */
hh_len = skb->dst->dev->hard_header_len;
if (skb_headroom(skb) < hh_len &&
pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC))
return -1;
return 0;
}
开发者ID:274914765,项目名称:C,代码行数:29,代码来源:netfilter.c
示例14: ipsec_encap_rcv_esp
static inline int ipsec_encap_rcv_esp(struct sk_buff *skb, int len)
{
struct iphdr *iph;
int iphlen;
if (!pskb_may_pull(skb, sizeof(struct udphdr) + len))
{
return -1;
}
if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
{
return -1;
}
iph = skb->nh.iph;
iphlen = iph->ihl << 2;
iph->tot_len = htons(ntohs(iph->tot_len) - len);
if (skb->len < iphlen + len)
{
return -1;
}
skb->h.raw = skb_pull(skb, len);
iph->protocol = IPPROTO_ESP;
return 0;
}
开发者ID:millken,项目名称:zhuxianB30,代码行数:29,代码来源:ip_input.c
示例15: send_msg
/**
* send_msg - send a TIPC message out over an InfiniBand interface
*/
static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr,
struct tipc_media_addr *dest)
{
struct sk_buff *clone;
struct net_device *dev;
int delta;
clone = skb_clone(buf, GFP_ATOMIC);
if (!clone)
return 0;
dev = ((struct ib_bearer *)(tb_ptr->usr_handle))->dev;
delta = dev->hard_header_len - skb_headroom(buf);
if ((delta > 0) &&
pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
kfree_skb(clone);
return 0;
}
skb_reset_network_header(clone);
clone->dev = dev;
clone->protocol = htons(ETH_P_TIPC);
dev_hard_header(clone, dev, ETH_P_TIPC, dest->value,
dev->dev_addr, clone->len);
dev_queue_xmit(clone);
return 0;
}
开发者ID:yuwgit,项目名称:pmfs,代码行数:31,代码来源:ib_media.c
示例16: xfrm6_tunnel_input
static int xfrm6_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
{
int err = -EINVAL;
if (skb->nh.raw[IP6CB(skb)->nhoff] != IPPROTO_IPV6)
goto out;
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto out;
if (skb_cloned(skb) &&
(err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
goto out;
if (x->props.flags & XFRM_STATE_DECAP_DSCP)
ipv6_copy_dscp(skb->nh.ipv6h, skb->h.ipv6h);
if (!(x->props.flags & XFRM_STATE_NOECN))
ipip6_ecn_decapsulate(skb);
skb->mac.raw = memmove(skb->data - skb->mac_len,
skb->mac.raw, skb->mac_len);
skb->nh.raw = skb->data;
err = 0;
out:
return err;
}
开发者ID:xiandaicxsj,项目名称:copyKvm,代码行数:25,代码来源:xfrm6_mode_tunnel.c
示例17: ip_route_me_harder
/* route_me_harder function, used by iptable_nat, iptable_mangle + ip_queue */
int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
{
struct net *net = dev_net(skb_dst(skb)->dev);
const struct iphdr *iph = ip_hdr(skb);
struct rtable *rt;
struct flowi4 fl4 = {};
__be32 saddr = iph->saddr;
__u8 flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0;
unsigned int hh_len;
if (addr_type == RTN_UNSPEC)
addr_type = inet_addr_type(net, saddr);
if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST)
flags |= FLOWI_FLAG_ANYSRC;
else
saddr = 0;
/* some non-standard hacks like ipt_REJECT.c:send_reset() can cause
* packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook.
*/
fl4.daddr = iph->daddr;
fl4.saddr = saddr;
fl4.flowi4_tos = RT_TOS(iph->tos);
fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
fl4.flowi4_mark = skb->mark;
fl4.flowi4_flags = flags;
rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt))
return -1;
/* Drop old route. */
skb_dst_drop(skb);
skb_dst_set(skb, &rt->dst);
if (skb_dst(skb)->error)
return -1;
#ifdef CONFIG_XFRM
if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
xfrm_decode_session(skb, flowi4_to_flowi(&fl4), AF_INET) == 0) {
struct dst_entry *dst = skb_dst(skb);
skb_dst_set(skb, NULL);
dst = xfrm_lookup(net, dst, flowi4_to_flowi(&fl4), skb->sk, 0);
if (IS_ERR(dst))
return -1;
skb_dst_set(skb, dst);
}
#endif
/* Change in oif may mean change in hh_len. */
hh_len = skb_dst(skb)->dev->hard_header_len;
if (skb_headroom(skb) < hh_len &&
pskb_expand_head(skb, HH_DATA_ALIGN(hh_len - skb_headroom(skb)),
0, GFP_ATOMIC))
return -1;
return 0;
}
开发者ID:openube,项目名称:android_kernel_sony_c2305,代码行数:59,代码来源:netfilter.c
示例18: rpl_dev_queue_xmit
int rpl_dev_queue_xmit(struct sk_buff *skb)
{
#undef dev_queue_xmit
int err = -ENOMEM;
if (vlan_tx_tag_present(skb) && !dev_supports_vlan_tx(skb->dev)) {
int features;
features = netif_skb_features(skb);
if (!vlan_tso)
features &= ~(NETIF_F_TSO | NETIF_F_TSO6 |
NETIF_F_UFO | NETIF_F_FSO);
skb = __vlan_put_tag(skb, skb->vlan_proto, vlan_tx_tag_get(skb));
if (unlikely(!skb))
return err;
vlan_set_tci(skb, 0);
if (netif_needs_gso(skb, features)) {
struct sk_buff *nskb;
nskb = skb_gso_segment(skb, features);
if (!nskb) {
if (unlikely(skb_cloned(skb) &&
pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
goto drop;
skb_shinfo(skb)->gso_type &= ~SKB_GSO_DODGY;
goto xmit;
}
if (IS_ERR(nskb)) {
err = PTR_ERR(nskb);
goto drop;
}
consume_skb(skb);
skb = nskb;
do {
nskb = skb->next;
skb->next = NULL;
err = dev_queue_xmit(skb);
skb = nskb;
} while (skb);
return err;
}
}
xmit:
return dev_queue_xmit(skb);
drop:
kfree_skb(skb);
return err;
}
开发者ID:MohanaPriya26,项目名称:ovs-reviews,代码行数:56,代码来源:gso.c
示例19: enlarge_skb
static int enlarge_skb(struct sk_buff *skb, unsigned int extra)
{
if (skb->len + extra > 65535)
return 0;
if (pskb_expand_head(skb, 0, extra - skb_tailroom(skb), GFP_ATOMIC))
return 0;
return 1;
}
开发者ID:Albinoman887,项目名称:pyramid-3.4.10,代码行数:10,代码来源:nf_nat_helper.c
示例20: brcmf_netdev_start_xmit
static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
struct net_device *ndev)
{
int ret;
struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_pub *drvr = ifp->drvr;
struct ethhdr *eh;
int head_delta;
brcmf_dbg(DATA, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
/* Can the device send data? */
if (drvr->bus_if->state != BRCMF_BUS_UP) {
bphy_err(drvr, "xmit rejected state=%d\n", drvr->bus_if->state);
netif_stop_queue(ndev);
dev_kfree_skb(skb);
ret = -ENODEV;
goto done;
}
/* Some recent Broadcom's firmwares disassociate STA when they receive
* an 802.11f ADD frame. This behavior can lead to a local DoS security
* issue. Attacker may trigger disassociation of any STA by sending a
* proper Ethernet frame to the wireless interface.
*
* Moreover this feature may break AP interfaces in some specific
* setups. This applies e.g. to the bridge with hairpin mode enabled and
* IFLA_BRPORT_MCAST_TO_UCAST set. IAPP packet generated by a firmware
* will get passed back to the wireless interface and cause immediate
* disassociation of a just-connected STA.
*/
if (!drvr->settings->iapp && brcmf_skb_is_iapp(skb)) {
dev_kfree_skb(skb);
ret = -EINVAL;
goto done;
}
/* Make sure there's enough writeable headroom */
if (skb_headroom(skb) < drvr->hdrlen || skb_header_cloned(skb)) {
head_delta = max_t(int, drvr->hdrlen - skb_headroom(skb), 0);
brcmf_dbg(INFO, "%s: insufficient headroom (%d)\n",
brcmf_ifname(ifp), head_delta);
atomic_inc(&drvr->bus_if->stats.pktcowed);
ret = pskb_expand_head(skb, ALIGN(head_delta, NET_SKB_PAD), 0,
GFP_ATOMIC);
if (ret < 0) {
bphy_err(drvr, "%s: failed to expand headroom\n",
brcmf_ifname(ifp));
atomic_inc(&drvr->bus_if->stats.pktcow_failed);
goto done;
}
}
开发者ID:Anjali05,项目名称:linux,代码行数:53,代码来源:core.c
注:本文中的pskb_expand_head函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论