本文整理汇总了C++中prg16_cdef函数的典型用法代码示例。如果您正苦于以下问题：C++ prg16_cdef函数的具体用法？C++ prg16_cdef怎么用？C++ prg16_cdef使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了prg16_cdef函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: prg16_89ab
void nes_racermate_device::pcb_reset()
{
// m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr4_0(0, CHRRAM);
chr4_4(0, CHRRAM);
m_latch = 0;
}
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:10，代码来源:nes_racermate.c
示例2: prg16_89ab
void nes_konami_vrc2_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_latch = 0;
memset(m_mmc_vrom_bank, 0, sizeof(m_mmc_vrom_bank));
}
开发者ID:vorlenko，项目名称:mame，代码行数:10，代码来源:konami.c
示例3: prg16_89ab
void nes_sunsoft_3_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_toggle = 0;
m_irq_count = 0;
m_irq_enable = 0;
}
开发者ID:Eduardop，项目名称:mame，代码行数:10，代码来源:sunsoft.c
示例4: prg16_89ab
void nes_namcot3425_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_latch = 0;
memset(m_reg, 0, sizeof(m_reg));
}
开发者ID:Ashura-X，项目名称:mame，代码行数:10，代码来源:namcot.cpp
示例5: prg16_89ab
void nes_daou306_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(m_prg_chunks - 2);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
set_nt_mirroring(PPU_MIRROR_LOW);
memset(m_reg, 0, sizeof(m_reg));
}
开发者ID:Enverex，项目名称:mame，代码行数:10，代码来源:pirate.cpp
示例6: prg16_89ab
void nes_tc0190fmc_pal16r4_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_enable = 0;
m_irq_count = 0;
m_irq_count_latch = 0;
}
开发者ID:DanielAeolusLaude，项目名称:mame，代码行数:11，代码来源:taito.c
示例7: prg16_89ab
void nes_fxrom_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_reg[0] = m_reg[2] = 0;
m_reg[1] = m_reg[3] = 0;
m_latch1 = m_latch2 = 0xfe;
}
开发者ID:broftkd，项目名称:mame，代码行数:11，代码来源:mmc2.cpp
示例8: prg16_89ab
void nes_lz93d50_24c01_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_enable = 0;
m_irq_count = 0;
m_i2c_dir = 0;
}
开发者ID:DragonMinded，项目名称:mame，代码行数:11，代码来源:bandai.cpp
示例9: prg16_89ab
void nes_futuremedia_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_clear = 0;
m_irq_enable = 0;
m_irq_count = m_irq_count_latch = 0;
}
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:11，代码来源:nes_pirate.c
示例10: prg16_89ab
void nes_namcot340_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
set_nt_mirroring(PPU_MIRROR_VERT);
m_irq_enable = 0;
m_irq_count = 0;
}
开发者ID:broftkd，项目名称:mame，代码行数:11，代码来源:namcot.cpp
示例11: prg16_89ab
void nes_ks7017_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(2);
chr8(0, m_chr_source);
m_latch = 0;
m_irq_enable = 0;
m_irq_count = 0;
m_irq_status = 0;
}
开发者ID:Enverex，项目名称:mame，代码行数:12，代码来源:kaiser.cpp
示例12: LOG_MMC
void nes_tam_s1_device::write_h(offs_t offset, uint8_t data)
{
LOG_MMC(("tam s1 write_h, offset: %04x, data: %02x\n", offset, data));
if (offset < 0x4000)
{
// this pcb is subject to bus conflict
data = account_bus_conflict(offset, data);
set_nt_mirroring(BIT(data, 7) ? PPU_MIRROR_VERT : PPU_MIRROR_HORZ);
prg16_cdef(data);
}
}
开发者ID:MoochMcGee，项目名称:mame，代码行数:13，代码来源:irem.cpp
示例13: prg16_89ab
void nes_nanjing_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(m_prg_chunks - 2);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_count = 0xff;
m_latch1 = 0;
m_latch2 = 0;
m_reg[0] = 0xff;
m_reg[1] = 0;
}
开发者ID:RafTacker，项目名称:mame，代码行数:13，代码来源:nanjing.cpp
示例14: prg16_89ab
void nes_konami_vrc3_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_mode = 0;
m_irq_enable = 0;
m_irq_enable_latch = 0;
m_irq_count = 0;
m_irq_count_latch = 0;
}
开发者ID:Ilgrim，项目名称:MAMEHub，代码行数:13，代码来源:nes_konami.c
示例15: prg16_89ab
void nes_ffe4_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(7);
chr8(0, m_chr_source);
m_exram_enabled = 0;
m_exram_bank = 0;
m_latch = 0;
m_irq_enable = 0;
m_irq_count = 0;
}
开发者ID:vorlenko，项目名称:mame，代码行数:14，代码来源:legacy.c
示例16: prg16_89ab
void nes_exrom_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(m_prg_chunks - 2);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_count = 0;
m_irq_status = 0;
m_irq_enable = 0;
m_mult1 = m_mult2 = 0;
m_vrom_page_a = m_vrom_page_b = 0;
m_floodtile = m_floodattr = 0;
m_prg_mode = 3;
m_chr_mode = 0;
m_wram_base = 0;
m_wram_protect_1 = 0;
m_wram_protect_2 = 0;
m_high_chr = 0;
m_split_scr = 0;
m_split_rev = 0;
m_split_ctrl = 0;
m_split_yst = 0;
m_split_bank = 0;
m_last_chr = LAST_CHR_REG_A;
m_ex1_chr = 0;
m_split_chr = 0;
m_ex1_bank = 0;
m_vcount = 0;
for (auto & elem : m_vrom_bank)
elem = 0x3ff;
m_prg_regs[0] = 0xfc;
m_prg_regs[1] = 0xfd;
m_prg_regs[2] = 0xfe;
m_prg_regs[3] = 0xff;
m_prg_ram_mapped[0] = 0;
m_prg_ram_mapped[1] = 0;
m_prg_ram_mapped[2] = 0;
m_prg_ram_mapped[3] = 0;
m_ram_hi_banks[0] = 0;
m_ram_hi_banks[1] = 0;
m_ram_hi_banks[2] = 0;
m_ram_hi_banks[3] = 0;
}
开发者ID:Enverex，项目名称:mame，代码行数:50，代码来源:mmc5.cpp
示例17: prg16_89ab
void nes_hengg_shjy3_device::pcb_reset()
{
m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM;
prg16_89ab(0);
prg16_cdef(m_prg_chunks - 1);
chr8(0, m_chr_source);
m_irq_enable = 0;
m_irq_count = m_irq_count_latch = 0;
m_chr_mode = 0;
memset(m_mmc_prg_bank, 0, sizeof(m_mmc_prg_bank));
memset(m_mmc_vrom_bank, 0, sizeof(m_mmc_vrom_bank));
memset(m_mmc_extra_bank, 0, sizeof(m_mmc_extra_bank));
}
开发者ID:DanielAeolusLaude，项目名称:mame，代码行数:15，代码来源:henggedianzi.c
示例18: switch
void nes_exrom_device::update_prg()
{
int bank0, bank1, bank2, bank3;
switch (m_prg_mode)
{
case 0: // 32k banks
bank3 = m_prg_regs[3] >> 2;
prg32(bank3);
break;
case 1: // 16k banks
bank1 = m_prg_regs[1] >> 1;
bank3 = m_prg_regs[3] >> 1;
if (m_prg_ram_mapped[1])
{
m_ram_hi_banks[0] = ((bank1 << 1) & 0x07);
m_ram_hi_banks[1] = ((bank1 << 1) & 0x07) | 1;
}
else
prg16_89ab(bank1);
prg16_cdef(bank3);
break;
case 2: // 16k-8k banks
bank1 = m_prg_regs[1] >> 1;
bank2 = m_prg_regs[2];
bank3 = m_prg_regs[3];
if (m_prg_ram_mapped[1])
{
m_ram_hi_banks[0] = ((bank1 << 1) & 0x07);
m_ram_hi_banks[1] = ((bank1 << 1) & 0x07) | 1;
}
else
prg16_89ab(bank1);
if (m_prg_ram_mapped[2])
m_ram_hi_banks[2] = (bank2 & 0x07);
else
prg8_cd(bank2);
prg8_ef(bank3);
break;
case 3: // 8k banks
bank0 = m_prg_regs[0];
bank1 = m_prg_regs[1];
bank2 = m_prg_regs[2];
bank3 = m_prg_regs[3];
if (m_prg_ram_mapped[0])
m_ram_hi_banks[0] = (bank0 & 0x07);
else
prg8_89(bank0);
if (m_prg_ram_mapped[1])
m_ram_hi_banks[1] = (bank1 & 0x07);
else
prg8_ab(bank1);
if (m_prg_ram_mapped[2])
m_ram_hi_banks[2] = (bank2 & 0x07);
else
prg8_cd(bank2);
prg8_ef(bank3);
break;
}
}
开发者ID:Enverex，项目名称:mame，代码行数:72，代码来源:mmc5.cpp
注：本文中的prg16_cdef函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论