• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ pressed函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pressed函数的典型用法代码示例。如果您正苦于以下问题:C++ pressed函数的具体用法?C++ pressed怎么用?C++ pressed使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pressed函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: connect

        connect(boneWeights, SIGNAL(enabled(bool)), this, SLOT(toggleBoneWeights(bool)), Qt::UniqueConnection);
        connect(boneWeightsUI, SIGNAL(returnToParent()), this, SLOT(returnToWidget()), Qt::UniqueConnection);
        connect(table, SIGNAL(cellDoubleClicked(int,int)), this, SLOT(viewSelected(int,int)), Qt::UniqueConnection);
    }else{
        disconnect(name, SIGNAL(textEdited(QString)), this, SLOT(setName(QString)));
        disconnect(enable, SIGNAL(released()), this, SLOT(setEnable()));
        disconnect(maxForce, SIGNAL(editingFinished()), this, SLOT(setMaxForce()));
        disconnect(tau, SIGNAL(editingFinished()), this, SLOT(setTau()));
        disconnect(damping, SIGNAL(editingFinished()), this, SLOT(setDamping()));
        disconnect(proportionalRecoveryVelocity, SIGNAL(released()), this, SLOT(setProportionalRecoveryVelocity()));
        disconnect(constantRecoveryVelocity, SIGNAL(released()), this, SLOT(setConstantRecoveryVelocity()));
        disconnect(poseMatchingBone0, SIGNAL(editingFinished()), this, SLOT(setPoseMatchingBone0()));
        disconnect(poseMatchingBone1, SIGNAL(editingFinished()), this, SLOT(setPoseMatchingBone1()));
        disconnect(poseMatchingBone2, SIGNAL(editingFinished()), this, SLOT(setPoseMatchingBone2()));
        disconnect(mode, SIGNAL(currentIndexChanged(int)), this, SLOT(setMode(int)));
        disconnect(bones, SIGNAL(pressed()), this, SLOT(viewBones()));
        disconnect(bones, SIGNAL(enabled(bool)), this, SLOT(toggleBones(bool)));
        disconnect(boneIndexUI, SIGNAL(returnToParent()), this, SLOT(returnToWidget()));
        disconnect(boneWeights, SIGNAL(pressed()), this, SLOT(viewBoneWeights()));
        disconnect(boneWeights, SIGNAL(enabled(bool)), this, SLOT(toggleBoneWeights(bool)));
        disconnect(boneWeightsUI, SIGNAL(returnToParent()), this, SLOT(returnToWidget()));
        disconnect(table, SIGNAL(cellDoubleClicked(int,int)), this, SLOT(viewSelected(int,int)));
    }
}

void PoweredRagdollControlsModifierUI::connectToTables(GenericTableWidget *variables, GenericTableWidget *properties, GenericTableWidget *ragdollBones){
    if (variables && properties && ragdollBones){
        disconnect(variables, SIGNAL(elementSelected(int,QString)), 0, 0);
        disconnect(properties, SIGNAL(elementSelected(int,QString)), 0, 0);
        disconnect(ragdollBones, SIGNAL(elementSelected(int,QString)), 0, 0);
        connect(variables, SIGNAL(elementSelected(int,QString)), this, SLOT(setBindingVariable(int,QString)), Qt::UniqueConnection);
开发者ID:Zartar,项目名称:Skyrim-Behavior-Editor-,代码行数:31,代码来源:poweredragdollcontrolsmodifierui.cpp


示例2: TrackView

InstrumentTrackView::InstrumentTrackView( InstrumentTrack * _it, TrackContainerView* tcv ) :
	TrackView( _it, tcv ),
	m_window( NULL ),
	m_lastPos( -1, -1 )
{
	setAcceptDrops( true );
	setFixedHeight( 32 );

	m_tlb = new TrackLabelButton( this, getTrackSettingsWidget() );
	m_tlb->setCheckable( true );
	m_tlb->setIcon( embed::getIconPixmap( "instrument_track" ) );
	m_tlb->move( 3, 1 );
	m_tlb->show();

	connect( m_tlb, SIGNAL( toggled( bool ) ),
			this, SLOT( toggleInstrumentWindow( bool ) ) );

	connect( _it, SIGNAL( nameChanged() ),
			m_tlb, SLOT( update() ) );

	// creation of widgets for track-settings-widget
	int widgetWidth;
	if( ConfigManager::inst()->value( "ui",
					  "compacttrackbuttons" ).toInt() )
	{
		widgetWidth = DEFAULT_SETTINGS_WIDGET_WIDTH_COMPACT;
	}
	else
	{
		widgetWidth = DEFAULT_SETTINGS_WIDGET_WIDTH;
	}

	m_volumeKnob = new Knob( knobSmall_17, getTrackSettingsWidget(),
							tr( "Volume" ) );
	m_volumeKnob->setVolumeKnob( true );
	m_volumeKnob->setModel( &_it->m_volumeModel );
	m_volumeKnob->setHintText( tr( "Volume:" ), "%" );
	m_volumeKnob->move( widgetWidth-2*24, 2 );
	m_volumeKnob->setLabel( tr( "VOL" ) );
	m_volumeKnob->show();
	m_volumeKnob->setWhatsThis( tr( volume_help ) );

	m_panningKnob = new Knob( knobSmall_17, getTrackSettingsWidget(),
							tr( "Panning" ) );
	m_panningKnob->setModel( &_it->m_panningModel );
    m_panningKnob->setHintText( tr( "Panning:" ), "%" );
	m_panningKnob->move( widgetWidth-24, 2 );
	m_panningKnob->setLabel( tr( "PAN" ) );
	m_panningKnob->show();

	m_midiMenu = new QMenu( tr( "MIDI" ), this );

	// sequenced MIDI?
	if( !Engine::mixer()->midiClient()->isRaw() )
	{
		_it->m_midiPort.m_readablePortsMenu = new MidiPortMenu(
							MidiPort::Input );
		_it->m_midiPort.m_writablePortsMenu = new MidiPortMenu(
							MidiPort::Output );
		_it->m_midiPort.m_readablePortsMenu->setModel(
							&_it->m_midiPort );
		_it->m_midiPort.m_writablePortsMenu->setModel(
							&_it->m_midiPort );
		m_midiInputAction = m_midiMenu->addMenu(
					_it->m_midiPort.m_readablePortsMenu );
		m_midiOutputAction = m_midiMenu->addMenu(
					_it->m_midiPort.m_writablePortsMenu );
	}
	else
	{
		m_midiInputAction = m_midiMenu->addAction( "" );
		m_midiOutputAction = m_midiMenu->addAction( "" );
		m_midiInputAction->setCheckable( true );
		m_midiOutputAction->setCheckable( true );
		connect( m_midiInputAction, SIGNAL( changed() ), this,
						SLOT( midiInSelected() ) );
		connect( m_midiOutputAction, SIGNAL( changed() ), this,
					SLOT( midiOutSelected() ) );
		connect( &_it->m_midiPort, SIGNAL( modeChanged() ),
				this, SLOT( midiConfigChanged() ) );
	}

	m_midiInputAction->setText( tr( "Input" ) );
	m_midiOutputAction->setText( tr( "Output" ) );

	m_activityIndicator = new FadeButton( QApplication::palette().color( QPalette::Active,
							QPalette::Background),
						QApplication::palette().color( QPalette::Active,
							QPalette::BrightText ),
						getTrackSettingsWidget() );
	m_activityIndicator->setGeometry(
					 widgetWidth-2*24-11, 2, 8, 28 );
	m_activityIndicator->show();
	connect( m_activityIndicator, SIGNAL( pressed() ),
				this, SLOT( activityIndicatorPressed() ) );
	connect( m_activityIndicator, SIGNAL( released() ),
				this, SLOT( activityIndicatorReleased() ) );
	connect( _it, SIGNAL( newNote() ),
			 m_activityIndicator, SLOT( activate() ) );
	connect( &_it->m_mutedModel, SIGNAL( dataChanged() ), this, SLOT( muteChanged() ) );
//.........这里部分代码省略.........
开发者ID:NeiroNext,项目名称:lmms,代码行数:101,代码来源:InstrumentTrack.cpp


示例3: QDialogEx

CConnector::CConnector(QWidget *pMainWindow)
	: QDialogEx(pMainWindow)
{
	m_pMainLayout = new QFormLayout();
	m_pMainLayout->setMargin(5);

	m_Mode = -1;

	int Counter = 0;
	m_pMainLayout->setWidget(Counter, QFormLayout::SpanningRole, new QLabel(tr(	"Setup NeoLoader Mode of operation\r\n"
																				"\r\n"
																				"Unified - Single Process\r\n"
																				"Separate - GUI in a separate process\r\n"
																				"Local - Core in a separate console process\r\n"
																				"Remote - No Core, only remote GUI \r\n"
																				"\r\n"
																				)));

	Counter++;
	m_pLabel = new QLabel(tr("<b>Restart NeoLoader to apply changes.</b><br />"));
	m_pLabel->setVisible(false);
	m_pMainLayout->setWidget(Counter, QFormLayout::SpanningRole, m_pLabel);

	Counter++;
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, new QLabel(tr("Operation Mode")));
	m_pMode = new QComboBox();
	m_pMode->addItem(tr("Single Process"), "Unified");
	m_pMode->addItem(tr("Separated Process"), "Separate");
	m_pMode->addItem(tr("Local Core"), "Local");
	m_pMode->addItem(tr("Remote Core"), "Remote");
	connect(m_pMode, SIGNAL(currentIndexChanged(int)), this, SLOT(OnModeChanged(int)));
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pMode);

	Counter++;
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, new QLabel(tr("Password")));
	m_pPassword = new QLineEdit();
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pPassword);

	Counter++;
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, new QLabel(tr("Host Port")));
	m_pHostPort = new QLineEdit();
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pHostPort);

	Counter++;
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, new QLabel(tr("Host Name")));
	m_pHostName = new QLineEdit();
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pHostName);

	Counter++;
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, new QLabel(tr("Pipe Name")));
	m_pPipeName = new QLineEdit();
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pPipeName);

	Counter++;
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, new QLabel(tr("Auto Connect")));
	m_pAutoConnect = new QComboBox();
	m_pAutoConnect->addItem(tr("No"));
	m_pAutoConnect->addItem(tr("Yes"));
	m_pAutoConnect->addItem(tr("Yes &  Start"));
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pAutoConnect);

	/*QtServiceController svc(theLoader->Cfg()->GetString("Core/ServiceName"));

	Counter++;
	m_pServiceBtn = new QPushButton(svc.isInstalled() ? tr("Remove Service") : tr("Install Service"));
	connect(m_pServiceBtn, SIGNAL(pressed()), this, SLOT(OnService()));
	m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, m_pServiceBtn);
	m_pServiceName = new QLineEdit();
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pServiceName);*/


	Counter++;
	//m_pStartBtn = new QPushButton(tr("Start"));
	//connect(m_pStartBtn, SIGNAL(pressed()), this, SLOT(OnStart()));
	//m_pMainLayout->setWidget(Counter, QFormLayout::LabelRole, m_pStartBtn);
	m_pConnectBtn = new QPushButton(tr("Connect"));
	connect(m_pConnectBtn, SIGNAL(pressed()), this, SLOT(OnConnect()));
	m_pMainLayout->setWidget(Counter, QFormLayout::FieldRole, m_pConnectBtn);

	Counter++;
	m_pButtonBox = new QDialogButtonBox(QDialogButtonBox::Apply | QDialogButtonBox::Cancel, Qt::Horizontal, this);
	QObject::connect(m_pButtonBox, SIGNAL(clicked(QAbstractButton *)), this, SLOT(OnClicked(QAbstractButton*)));
	m_pMainLayout->setWidget(Counter, QFormLayout::SpanningRole, m_pButtonBox);

	setLayout(m_pMainLayout);

	Load();

	m_uTimerID = startTimer(100);
}
开发者ID:0vermind,项目名称:NeoLoader,代码行数:90,代码来源:Connector.cpp


示例4: ModelPanel


//.........这里部分代码省略.........
    label->setMouseTracking(true);
    label->setProperty("index", i);
    label->setText(tr("SF%1").arg(i+1));
    label->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Minimum);
    connect(label, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(fsw_customContextMenuRequested(QPoint)));
    gridLayout->addWidget(label, i+1, 0);

    // The switch
    fswtchSwtch[i] = new QComboBox(this);
    fswtchSwtch[i]->setProperty("index", i);
    fswtchSwtch[i]->setSizePolicy(QSizePolicy::Maximum, QSizePolicy::Minimum);
    connect(fswtchSwtch[i], SIGNAL(currentIndexChanged(int)), this, SLOT(customFunctionEdited()));
    gridLayout->addWidget(fswtchSwtch[i], i+1, 1);

    // The function
    fswtchFunc[i] = new QComboBox(this);
    fswtchFunc[i]->setProperty("index", i);
    connect(fswtchFunc[i], SIGNAL(currentIndexChanged(int)), this, SLOT(functionEdited()));
    gridLayout->addWidget(fswtchFunc[i], i+1, 2);

    QHBoxLayout *paramLayout = new QHBoxLayout();
    gridLayout->addLayout(paramLayout, i+1, 3);

    fswtchGVmode[i] = new QComboBox(this);
    fswtchGVmode[i]->setProperty("index", i);
    connect(fswtchGVmode[i], SIGNAL(currentIndexChanged(int)), this, SLOT(customFunctionEdited()));
    paramLayout->addWidget(fswtchGVmode[i]);

    fswtchParamGV[i] = new QCheckBox(this);
    fswtchParamGV[i]->setProperty("index", i);
    fswtchParamGV[i]->setText("GV");
    fswtchParamGV[i]->setSizePolicy(QSizePolicy::Minimum,QSizePolicy::Minimum);
    connect(fswtchParamGV[i], SIGNAL(stateChanged(int)), this, SLOT(customFunctionEdited()));
    paramLayout->addWidget(fswtchParamGV[i]);

    fswtchParam[i] = new QDoubleSpinBox(this);
    fswtchParam[i]->setProperty("index", i);
    fswtchParam[i]->setAccelerated(true);
    fswtchParam[i]->setDecimals(0);
    connect(fswtchParam[i], SIGNAL(editingFinished()), this, SLOT(customFunctionEdited()));
    paramLayout->addWidget(fswtchParam[i]);

    fswtchParamTime[i] = new QTimeEdit(this);
    fswtchParamTime[i]->setProperty("index", i);
    fswtchParamTime[i]->setAccelerated(true);
    fswtchParamTime[i]->setDisplayFormat("hh:mm:ss");
    connect(fswtchParamTime[i], SIGNAL(editingFinished()), this, SLOT(customFunctionEdited()));
    paramLayout->addWidget(fswtchParamTime[i]);

    fswtchParamT[i] = new QComboBox(this);
    fswtchParamT[i]->setProperty("index", i);
    paramLayout->addWidget(fswtchParamT[i]);
    connect(fswtchParamT[i], SIGNAL(currentIndexChanged(int)), this, SLOT(customFunctionEdited()));

    fswtchParamArmT[i] = new QComboBox(this);
    fswtchParamArmT[i]->setProperty("index", i);
    fswtchParamArmT[i]->setEditable(true);
    paramLayout->addWidget(fswtchParamArmT[i]);

    connect(fswtchParamArmT[i], SIGNAL(currentIndexChanged(int)), this, SLOT(customFunctionEdited()));
    connect(fswtchParamArmT[i], SIGNAL(editTextChanged ( const QString)), this, SLOT(customFunctionEdited()));

    fswtchBLcolor[i] = new QSlider(this);
    fswtchBLcolor[i]->setProperty("index", i);
    fswtchBLcolor[i]->setMinimum(0);
    fswtchBLcolor[i]->setMaximum(100);
    fswtchBLcolor[i]->setSingleStep(1);
    fswtchBLcolor[i]->setOrientation(Qt::Horizontal);
    paramLayout->addWidget(fswtchBLcolor[i]);
    connect(fswtchBLcolor[i], SIGNAL(sliderReleased()), this, SLOT(customFunctionEdited()));

#ifdef PHONON
    playBT[i] = new QPushButton(this);
    playBT[i]->setProperty("index", i);
    playBT[i]->setIcon(playIcon);
    paramLayout->addWidget(playBT[i]);
    connect(playBT[i], SIGNAL(pressed()), this, SLOT(playMusic()));
#endif

    QHBoxLayout *repeatLayout = new QHBoxLayout();
    gridLayout->addLayout(repeatLayout, i+1, 4);
    fswtchRepeat[i] = new RepeatComboBox(this, model.funcSw[i].repeatParam);
    repeatLayout->addWidget(fswtchRepeat[i], i+1);
    connect(fswtchRepeat[i], SIGNAL(modified()), this, SLOT(onChildModified()));

    fswtchEnable[i] = new QCheckBox(this);
    fswtchEnable[i]->setProperty("index", i);
    fswtchEnable[i]->setText(tr("ON"));
    fswtchEnable[i]->setFixedWidth( 80 );
    repeatLayout->addWidget(fswtchEnable[i], i+1);
    connect(fswtchEnable[i], SIGNAL(stateChanged(int)), this, SLOT(customFunctionEdited()));
  }

  // Push rows upward
  addDoubleSpring(gridLayout, 5, num_fsw+1);

  disableMouseScrolling();

  lock = false;
}
开发者ID:mcules,项目名称:opentx,代码行数:101,代码来源:customfunctions.cpp


示例5: QMainWindow

EditorMainWindow::EditorMainWindow(QWidget *parent)
	: QMainWindow(parent)
{
	camera_ = 0;

	ui.setupUi(this);
	QApplication::connect(ui.action_Open, SIGNAL(triggered()), this, SLOT(openRequested()));
	QApplication::connect(ui.action_Save, SIGNAL(triggered()), this, SLOT(saveRequested()));
	QApplication::connect(ui.actionDerive_map, SIGNAL(triggered()), this, SLOT(deriveMap()));
	QApplication::connect(ui.action_Quit, SIGNAL(triggered()), QApplication::instance(), SLOT(quit()));
	QApplication::connect(ui.actionZoom_In, SIGNAL(triggered()), this, SLOT(zoominRequested()));
	QApplication::connect(ui.actionZoom_Out, SIGNAL(triggered()), this, SLOT(zoomoutRequested()));
	QApplication::connect(ui.horizontalScrollBar, SIGNAL(valueChanged(int)), this, SLOT(horzScroll(int)));
	QApplication::connect(ui.verticalScrollBar, SIGNAL(valueChanged(int)), this, SLOT(vertScroll(int)));
	QApplication::connect(ui.actionRotate_Left, SIGNAL(triggered()), this, SLOT(rotateLeft()));
	QApplication::connect(ui.actionRotate_Right, SIGNAL(triggered()), this, SLOT(rotateRight()));
	QApplication::connect(ui.actionTilt_Up, SIGNAL(triggered()), this, SLOT(tiltUp()));
	QApplication::connect(ui.actionTilt_Down, SIGNAL(triggered()), this, SLOT(tiltDown()));
	QApplication::connect(ui.actionUndo, SIGNAL(triggered()), this, SLOT(undo()));
	QApplication::connect(ui.actionRedo, SIGNAL(triggered()), this, SLOT(redo()));

	QApplication::connect(new QShortcut(QKeySequence(Qt::CTRL + Qt::Key_S),this), SIGNAL(activated()), this, SLOT(saveRequested()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::CTRL + Qt::Key_O),this), SIGNAL(activated()), this, SLOT(openRequested()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_Z),this), SIGNAL(activated()), this, SLOT(zoominRequested()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_X),this), SIGNAL(activated()), this, SLOT(zoomoutRequested()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::CTRL + Qt::Key_Left),this), SIGNAL(activated()), this, SLOT(rotateLeft()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::CTRL + Qt::Key_Right),this), SIGNAL(activated()), this, SLOT(rotateRight()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::CTRL + Qt::Key_Up),this), SIGNAL(activated()), this, SLOT(tiltUp()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::CTRL + Qt::Key_Down),this), SIGNAL(activated()), this, SLOT(tiltDown()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_Left),this), SIGNAL(activated()), this, SLOT(panLeft()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_Right),this), SIGNAL(activated()), this, SLOT(panRight()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_Up),this), SIGNAL(activated()), this, SLOT(panUp()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_Down),this), SIGNAL(activated()), this, SLOT(panDown()));

	ui.action_Save->setEnabled(false);
	ui.editorGLWidget->setEnabled(false);

	QToolButton* party_button = new QToolButton();
	party_button->setText("Parties");
	party_button->setCheckable(true);
	party_button->setChecked(false);
	handlers_.push_back(new TerrainHandler(*this, "party", false, tool_buttons_.size()));
	QApplication::connect(party_button, SIGNAL(pressed()), handlers_.back(), SLOT(terrainSelected()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_P),this), SIGNAL(activated()), handlers_.back(), SLOT(terrainSelected()));
	ui.tilesToolBar->addWidget(party_button);
	tool_buttons_.push_back(party_button);

	QToolButton* height_button = new QToolButton();
	height_button->setText("Height");
	height_button->setCheckable(true);
	height_button->setChecked(true);
	handlers_.push_back(new TerrainHandler(*this, "", false, tool_buttons_.size()));
	QApplication::connect(height_button, SIGNAL(pressed()), handlers_.back(), SLOT(terrainSelected()));
	QApplication::connect(new QShortcut(QKeySequence(Qt::Key_H),this), SIGNAL(activated()), handlers_.back(), SLOT(terrainSelected()));
	ui.tilesToolBar->addWidget(height_button);
	tool_buttons_.push_back(height_button);

	QToolButton* picker_button = new QToolButton();
	picker_button->setText("Picker");
	picker_button->setCheckable(true);
	handlers_.push_back(new TerrainHandler(*this, "", true, tool_buttons_.size()));
	QApplication::connect(picker_button, SIGNAL(pressed()), handlers_.back(), SLOT(terrainSelected()));
	ui.tilesToolBar->addWidget(picker_button);
	tool_buttons_.push_back(picker_button);

	std::vector<std::string> terrain_ids;
	hex::base_terrain::get_terrain_ids(terrain_ids);
	for(int n = 0; n != terrain_ids.size(); ++n) {
		QToolButton* b = new QToolButton();
		b->setText(hex::base_terrain::get(terrain_ids[n])->name().c_str());
		b->setCheckable(true);
		handlers_.push_back(new TerrainHandler(*this, terrain_ids[n], false, tool_buttons_.size()));
		QApplication::connect(b, SIGNAL(pressed()), handlers_.back(), SLOT(terrainSelected()));
		ui.tilesToolBar->addWidget(b);
		tool_buttons_.push_back(b);
	}

	terrain_ids.clear();
	hex::terrain_feature::get_feature_ids(terrain_ids);
	for(int n = 0; n != terrain_ids.size(); ++n) {
		QToolButton* b = new QToolButton();
		b->setText(hex::terrain_feature::get(terrain_ids[n])->name().c_str());
		b->setCheckable(true);
		handlers_.push_back(new TerrainHandler(*this, terrain_ids[n], true, tool_buttons_.size()));
		QApplication::connect(b, SIGNAL(pressed()), handlers_.back(), SLOT(terrainSelected()));
		ui.tilesToolBar->addWidget(b);
		tool_buttons_.push_back(b);
	}
}
开发者ID:BrittzXD,项目名称:silvertree,代码行数:89,代码来源:editormainwindow.cpp


示例6: m_pStyle

  m_pStyle(0)
{
	parentButton = new QToolButton(this);
	parentButton->setMaximumSize( QSize( 22, 22 ) );
	parentButton->setCheckable( true );
	parentButton->setText( tr("P", "P as in Parent"));
	parentButton->setToolTip( tr("Use parent style's alignment instead of overriding it"));
	GroupAlignLayout->addWidget( parentButton );
	resize(minimumSizeHint());
	parentButton->hide();
}

void SMAlignSelect::setStyle(int i)
{
	disconnect(this, SIGNAL(State(int)), this, SLOT(styleChanged()));
	disconnect(parentButton, SIGNAL(pressed()), this, SLOT(pbPressed()));
	setFont(false);
	m_hasParent = false;
	m_pStyle = 0;
	parentButton->hide();
	AlignSelect::setStyle(i);
}

void SMAlignSelect::setStyle(int i, bool isParentValue)
{
	disconnect(this, SIGNAL(State(int)), this, SLOT(styleChanged()));
	disconnect(parentButton, SIGNAL(pressed()), this, SLOT(pbPressed()));
	m_hasParent = true;
	m_pStyle = i;
	setFont(!isParentValue);
	if (isParentValue)
开发者ID:Fahad-Alsaidi,项目名称:scribus,代码行数:31,代码来源:smalignselect.cpp


示例7: pressed

void ResetWidgetPushButton::myPressed()
{
    emit pressed(m_name);
}
开发者ID:anchowee,项目名称:QtCreator,代码行数:4,代码来源:resetwidget.cpp


示例8: m_pOSGView

Motion::Motion(GraphicsView* view, QWidget* parent)
	: m_pOSGView(view), QWidget(parent)
{
	ui.setupUi(this);

	addSphere();

	connect(ui.radioButton, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_2, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_3, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_4, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_5, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_6, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_7, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_8, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_9, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_10, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_11, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_12, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_13, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_14, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_15, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_16, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_17, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_18, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_19, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_20, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_21, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_22, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_23, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_24, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_25, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_26, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
	connect(ui.radioButton_27, SIGNAL(pressed()), this, SLOT(slotRadioChanged()));
}
开发者ID:Ezio47,项目名称:OSGEarth,代码行数:35,代码来源:motion.cpp


示例9: loadEvents

Calendar::Calendar()
{
    eventListCounter = 0;
    loadEvents();

    actualDate = new QDate;
    *actualDate = QDate::currentDate();                      //get's information about current date and sets proper label
    int actualDay, actualMonth, actualYear;
    actualDate->getDate(&actualDay, &actualMonth, &actualYear);

    // essential variables initialization

    actualDate->getDate(&year,&month,&day);
    QDate dayOfWeek(year,month,1);      //gets information about first day of selected month and year
    whatDay = dayOfWeek.dayOfWeek();

    // end of essential variables initialization

    actualWeek = actualDate->weekNumber();

    // future note: array are better than days[0], days[1], days[2]... :P

    days = new Day*[7];

    days[0] = new Day("Monday");
    days[1] = new Day("Tuesday");
    days[2] = new Day("Wednesday");
    days[3] = new Day("Thursday");
    days[4] = new Day("Friday");
    days[5] = new Day("Saturday");
    days[6] = new Day("Sunday");


    daysLayout = new QHBoxLayout;

    navigationLayout = new QHBoxLayout;            // horizontal layout for navigation elements

    // creating elements for navigation box
    navigationLeft = new QPushButton("<<");
    navigationRight = new QPushButton(">>");
    dateLabel = new QLabel();                       // QLabel initialization

    navigationLayout->addWidget(navigationLeft);
    navigationLayout->addWidget(dateLabel);
    navigationLayout->addWidget(navigationRight);

    mainLayout = new QVBoxLayout;                  // vertical layout for navigation and days boxes
    mainLayout->addLayout(navigationLayout);
    mainLayout->addLayout(daysLayout);
    this->setLayout(mainLayout);

    QString initialDateLabel = dateToString(actualYear, actualMonth, actualDay);
    dateLabel->setText("<center>" + initialDateLabel + "</center>");
    sortButtons();
    connect(navigationLeft,SIGNAL(pressed()),this,SLOT(navigationLeftClicked()));   //connects navigation buttons with action (changing day's range or month)
    connect(navigationRight,SIGNAL(pressed()),this,SLOT(navigationRightClicked()));


/* Signal mapper is used to send parameter to slot method. The parameter here is
 * integer which reprenets offset of certain days of week. */

    QSignalMapper* signalMapper = new QSignalMapper(this);              // signal mapping is needed to parametrize slot :(

    connect(days[0], SIGNAL(pressed()), signalMapper, SLOT(map()));
    connect(days[1], SIGNAL(pressed()), signalMapper, SLOT(map()));
    connect(days[2], SIGNAL(pressed()), signalMapper, SLOT(map()));
    connect(days[3], SIGNAL(pressed()), signalMapper, SLOT(map()));
    connect(days[4], SIGNAL(pressed()), signalMapper, SLOT(map()));
    connect(days[5], SIGNAL(pressed()), signalMapper, SLOT(map()));
    connect(days[6], SIGNAL(pressed()), signalMapper, SLOT(map()));

    signalMapper->setMapping(days[0], 0);
    signalMapper->setMapping(days[1], 1);
    signalMapper->setMapping(days[2], 2);
    signalMapper->setMapping(days[3], 3);
    signalMapper->setMapping(days[4], 4);
    signalMapper->setMapping(days[5], 5);
    signalMapper->setMapping(days[6], 6);

    connect(signalMapper, SIGNAL(mapped(int)), this, SLOT(scheduleDay(int)));

    colorTask();
}
开发者ID:togetherCoding,项目名称:Calendar,代码行数:83,代码来源:calendar.cpp


示例10: QPushButton

ResetWidgetPushButton::ResetWidgetPushButton(QWidget *parent) : QPushButton(parent)
{
    connect(this, SIGNAL(pressed()), this, SLOT(myPressed()));
}
开发者ID:anchowee,项目名称:QtCreator,代码行数:4,代码来源:resetwidget.cpp


示例11: QWidget

QgsMapStylingWidget::QgsMapStylingWidget( QgsMapCanvas* canvas, QWidget *parent )
    : QWidget( parent )
    , mMapCanvas( canvas )
    , mBlockAutoApply( false )
    , mCurrentLayer( nullptr )
    , mVectorStyleWidget( nullptr )
{
  QBoxLayout* layout = new QVBoxLayout();
  layout->setContentsMargins( 0, 0, 0, 0 );
  this->setLayout( layout );

  mAutoApplyTimer = new QTimer( this );
  mAutoApplyTimer->setSingleShot( true );
  connect( mAutoApplyTimer, SIGNAL( timeout() ), this, SLOT( apply() ) );

  mStackedWidget = new QStackedWidget( this );
  mMapStyleTabs = new QTabWidget( this );
  mMapStyleTabs->setDocumentMode( true );
  mNotSupportedPage = mStackedWidget->addWidget( new QLabel( "Not supported currently" ) );
  mVectorPage = mStackedWidget->addWidget( mMapStyleTabs );

  // create undo widget
  mUndoWidget = new QgsUndoWidget( this->mMapStyleTabs, mMapCanvas );
  mUndoWidget->setObjectName( "Undo Styles" );

  mLayerTitleLabel = new QLabel();
  mLayerTitleLabel->setAlignment( Qt::AlignHCenter );
  layout->addWidget( mLayerTitleLabel );
  layout->addWidget( mStackedWidget );
  mButtonBox = new QDialogButtonBox( QDialogButtonBox::Apply );
  mLiveApplyCheck = new QCheckBox( "Live update" );
  mLiveApplyCheck->setChecked( true );

  mUndoButton = new QToolButton( this );
  mUndoButton->setIcon( QgsApplication::getThemeIcon( "mActionUndo.png" ) );
  mRedoButton = new QToolButton( this );
  mRedoButton->setIcon( QgsApplication::getThemeIcon( "mActionRedo.png" ) );

  connect( mUndoButton, SIGNAL( pressed() ), mUndoWidget, SLOT( undo() ) );
  connect( mRedoButton, SIGNAL( pressed() ), mUndoWidget, SLOT( redo() ) );

  QHBoxLayout* bottomLayout = new QHBoxLayout( );
  bottomLayout->addWidget( mUndoButton );
  bottomLayout->addWidget( mRedoButton );
  bottomLayout->addWidget( mButtonBox );
  bottomLayout->addWidget( mLiveApplyCheck );
  layout->addLayout( bottomLayout );

  mLabelingWidget = new QgsLabelingWidget( 0, mMapCanvas, this );
  mLabelingWidget->setDockMode( true );
  connect( mLabelingWidget, SIGNAL( widgetChanged() ), this, SLOT( autoApply() ) );

  // Only labels for now but styles and diagrams will come later
  QScrollArea* stylescroll = new QScrollArea;
  stylescroll->setWidgetResizable( true );
  stylescroll->setFrameStyle( QFrame::NoFrame );
  QScrollArea* labelscroll = new QScrollArea;
  labelscroll->setWidgetResizable( true );
  labelscroll->setFrameStyle( QFrame::NoFrame );
  labelscroll->setWidget( mLabelingWidget );

  mStyleTabIndex = mMapStyleTabs->addTab( stylescroll, QgsApplication::getThemeIcon( "propertyicons/symbology.png" ), "Styles" );
  mLabelTabIndex = mMapStyleTabs->addTab( labelscroll, QgsApplication::getThemeIcon( "labelingSingle.svg" ), "Labeling" );
  mMapStyleTabs->addTab( mUndoWidget, QgsApplication::getThemeIcon( "labelingSingle.svg" ), "History" );
//  int diagramTabIndex = mMapStyleTabs->addTab( new QWidget(), QgsApplication::getThemeIcon( "propertyicons/diagram.png" ), "Diagrams" );
//  mMapStyleTabs->setTabEnabled( styleTabIndex, false );
//  mMapStyleTabs->setTabEnabled( diagramTabIndex, false );
  mMapStyleTabs->setCurrentIndex( mStyleTabIndex );

  connect( mMapStyleTabs, SIGNAL( currentChanged( int ) ), this, SLOT( updateCurrentWidgetLayer( int ) ) );

  connect( mLiveApplyCheck, SIGNAL( toggled( bool ) ), mButtonBox->button( QDialogButtonBox::Apply ), SLOT( setDisabled( bool ) ) );

  connect( mButtonBox->button( QDialogButtonBox::Apply ), SIGNAL( clicked() ), this, SLOT( apply() ) );

  mButtonBox->button( QDialogButtonBox::Apply )->setEnabled( false );

}
开发者ID:danylaksono,项目名称:QGIS,代码行数:78,代码来源:qgsmapstylingwidget.cpp


示例12: QWidget

MainWidget::MainWidget(const QString &token, const QString &user_id, QWidget *parent)
    : QWidget(parent), m_token(token), m_user_id(user_id), m_playState(false)
{
    m_removeCurrent = false;
    m_player = new QMediaPlayer;
    m_player->setVolume(100);

    m_mediaWebPlaylist = new QMediaPlaylist(m_player);
    m_mediaWebPlaylist->setObjectName("web");
    m_player->setPlaylist(m_mediaWebPlaylist);

    loadUserPlaylist();
    this->resize(800, 600);
    this->setWindowTitle("VK Music Player");


    QDir dir("./cache/");
    if(!dir.exists())
        dir.mkpath(".");

    QGridLayout* mainLayout = new QGridLayout;

    m_currentLabel = new QLabel;
    m_currentLabel->setFont(QFont("Arial", 16));
    m_currentLabel->setSizePolicy(QSizePolicy::Ignored, QSizePolicy::Ignored);
    mainLayout->addWidget(m_currentLabel, 0, 0, 1, 9, Qt::AlignCenter);

    ImageButton *prevButton = new ImageButton("prevbutton.png");
    mainLayout->addWidget(prevButton, 2, 3, 1, 1, Qt::AlignTop | Qt::AlignRight);

    m_playPauseButton = new ImageButton("playbutton.png");
    mainLayout->addWidget(m_playPauseButton, 2, 4, 1, 1, Qt::AlignTop);

    ImageButton *nextButton = new ImageButton("nextbutton.png");
    mainLayout->addWidget(nextButton, 2, 5, 1, 1, Qt::AlignTop | Qt::AlignLeft);

    m_playlistWidget = new PlaylistWidget;
    mainLayout->addWidget(m_playlistWidget, 3, 0, 3, 9);

    m_seekslider = new QSlider;
    m_seekslider->setOrientation(Qt::Horizontal);
    mainLayout->addWidget(m_seekslider, 1, 0, 1, 7);

    m_volumeSlider = new QSlider;
    m_volumeSlider->setOrientation(Qt::Horizontal);
    m_volumeSlider->setMaximum(100);
    m_volumeSlider->setValue(100);
    m_volumeSlider->setSingleStep(1);
    mainLayout->addWidget(m_volumeSlider, 1, 7, 1, 2);

    m_timeLabel = new QLabel;
    m_timeLabel->setText("0:00");
    mainLayout->addWidget(m_timeLabel, 2, 0, 1, 2, Qt::AlignTop);

    m_volumeLabel = new QLabel;
    m_volumeLabel->setText(QString::number(m_player->volume())+"%");
    mainLayout->addWidget(m_volumeLabel, 2, 7, 1, 2, Qt::AlignTop | Qt::AlignHCenter);

    m_cacheCurrent = new QCheckBox(tr("&Save"));
    mainLayout->addWidget(m_cacheCurrent, 2, 7, 1, 2, Qt::AlignBottom | Qt::AlignRight);

    m_searchEdit = new QLineEdit;
    m_searchEdit->setPlaceholderText(tr("Search"));
    mainLayout->addWidget(m_searchEdit, 2, 0, 1, 8, Qt::AlignBottom);

    this->setLayout(mainLayout);

    connect(this, SIGNAL(playlistReady()),
            SLOT(fillPlaylistWidget_slot()));
    connect(this, SIGNAL(playStateChanged(bool)),
            SLOT(playStateChanged_slot(bool)));

    connect(m_playPauseButton, SIGNAL(pressed()), this, SLOT(playOrPause()));

    connect(nextButton, &ImageButton::pressed,
            [=](){
                m_playlistWidget->setCurrent(m_playlistWidget->getCurrentId()+1);
                m_player->play();
                emit playStateChanged(true);
            });

    connect(prevButton, &ImageButton::pressed,
            [=](){
                m_playlistWidget->setCurrent(m_playlistWidget->getCurrentId()-1);
                m_player->play();
                emit playStateChanged(true);
            });


    connect(m_player, SIGNAL(mediaStatusChanged(QMediaPlayer::MediaStatus)),
            this, SLOT(mediaStatusChanged_slot(QMediaPlayer::MediaStatus)));

    connect(m_playlistWidget, SIGNAL(currentChanged(PlaylistMember*)),
            this, SLOT(currentChanged_slot(PlaylistMember*)));

    connect(m_player, SIGNAL(positionChanged(qint64)),
            this, SLOT(updateSlider(qint64)));

    connect(m_player, &QMediaPlayer::volumeChanged,
            [=](int v){ m_volumeLabel->setText(QString::number(v)+"%"); });
//.........这里部分代码省略.........
开发者ID:MastAKK,项目名称:VkMusicPlayer,代码行数:101,代码来源:mainwidget.cpp


示例13: red_active

// constructor
MyWindow::MyWindow(int w, int h) : 
  red_active(false),
  red_set(*(new Polygon_set)),
  blue_set(*(new Polygon_set)),
  res_set(*(new Polygon_set))										  
{
  widget = new CGAL::Qt_widget(this); //Constructs a widget which is a child of this window


  /* Sets the central widget for this main window to w.
   * The central widget is surrounded by the left, top, right and bottom dock areas.
   * The menu bar is above the top dock area
   */
  setCentralWidget(widget);

  file_name= QString::null;

  //create a timer for checking if somthing changed
  QTimer *timer = new QTimer( this ); // constructs a timer whose parent is this window

  connect( timer, SIGNAL(timeout()),
           this, SLOT(timer_done()) );  // connects the timer to the window
  timer->start( 200, FALSE ); // Starts the timer with a msec milliseconds timeout

  // file menu
  QPopupMenu * file = new QPopupMenu( this );
  menuBar()->insertItem( "&File", file );
  file->insertItem("&New", this, SLOT(new_instance()), CTRL+Key_N);
  file->insertItem("New &Window", this, SLOT(new_window()), CTRL+Key_W);
  file->insertSeparator();
  file->insertItem("&Open Linear Polygon file", this, SLOT(open_linear_polygon_file()),CTRL+Key_O);
  file->insertItem("&Open DXF file", this, SLOT(open_dxf_file()),CTRL+Key_D);
  file->insertSeparator();
  //file->insertItem("&Save",this ,SLOT(save_file()),CTRL+Key_S);
  //file->insertItem("&Save as",this ,SLOT(save_file_as()));
  file->insertSeparator();
  file->insertItem("Print", widget, SLOT(print_to_ps()), CTRL+Key_P);
  file->insertSeparator();
  file->insertItem( "&Close", this, SLOT(close()), CTRL+Key_X );
  file->insertItem( "&Quit", qApp, SLOT( closeAllWindows() ), CTRL+Key_Q );

  // help menu
  QPopupMenu * help = new QPopupMenu( this );
  menuBar()->insertItem( "&Help", help );
  help->insertItem("How To", this, SLOT(howto()), Key_F1);
  help->insertSeparator();
  help->insertItem("&About", this, SLOT(about()), CTRL+Key_A );
  help->insertItem("About &Qt", this, SLOT(aboutQt()) );

  //the standard toolbar
  stoolbar = new CGAL::Qt_widget_standard_toolbar (widget, this, "ST");

  radiotoolbar = new QToolBar(this, "polygon type");
  blue_pgn = new QRadioButton ("Blue", radiotoolbar);
  blue_pgn->toggle();
  red_pgn = new QRadioButton("Red", radiotoolbar);
  radio_group = new QVButtonGroup(this,"Radios");
  radio_group->insert(blue_pgn);
  radio_group->insert(red_pgn);
  radio_group->setRadioButtonExclusive(true);


  connect(blue_pgn, SIGNAL(toggled (bool)),
	  this, SLOT(radio_selected()));
  connect(red_pgn, SIGNAL(toggled (bool)),
	  this, SLOT(radio_selected()));


  //layers
  //widget->attach(&testlayer);

  //the new tools toolbar
  newtoolbar = new Tools_toolbar(widget, this);

  // voronoi toolbar
  bops_toolbar = new QToolBar(this, "Boolean operations");

  QIconSet set0(QPixmap( (const char**)intersection_xpm ),
		QPixmap( (const char**)intersection_xpm ));

  intersection_but = new QToolButton(bops_toolbar, "Boolean operations");
  intersection_but->setAutoRaise(TRUE);

  intersection_but->setIconSet(set0);
  intersection_but->setTextLabel("Intersection ");
  connect(intersection_but,SIGNAL(pressed()),
	  this, SLOT(perform_intersection()));

  QIconSet set1(QPixmap( (const char**)union_xpm ),
		QPixmap( (const char**)union_xpm ));

  bops_toolbar->addSeparator();
  union_but = new QToolButton(bops_toolbar, "Boolean operations");
  union_but->setAutoRaise(TRUE);

  union_but->setIconSet(set1);
  union_but->setTextLabel("Union ");
  connect(union_but,SIGNAL(pressed()),
	  this, SLOT(perform_union()));
//.........这里部分代码省略.........
开发者ID:ooici-dm,项目名称:CGAL-Mesh,代码行数:101,代码来源:boolean_operations_2.cpp


示例14: setParent

ClientSettings::ClientSettings(ClientInterface* par)
{
    m_parent = par;
    setParent(par);
    setWhatsThis(tr("Ici, vous pouvez régler bon nombre d'options du logiciel."));

    setWindowFlags(Qt::Dialog|Qt::CustomizeWindowHint|Qt::WindowTitleHint|Qt::WindowCloseButtonHint|Qt::WindowContextHelpButtonHint);

    m_settings = allocateSettings(this);

    QVBoxLayout* la = new QVBoxLayout;
    QVBoxLayout* la2 = new QVBoxLayout;
    QHBoxLayout* hla= new QHBoxLayout;
    setLayout(hla);
    hla->addLayout(la);
    hla->addLayout(la2);

    {
        QGroupBox *gb = new QGroupBox(tr("Général"));
        la->addWidget(gb);
        QVBoxLayout* v_la = new QVBoxLayout;
        gb->setLayout(v_la);

        {
            QHBoxLayout* h_la = new QHBoxLayout;
            v_la->addLayout(h_la);

            m_nickname = new QLineEdit(m_settings->value(PARAM_NICK).toString(), this);
            m_nickname->setMaxLength(MAX_NICKNAME_LENGHT);
            m_nickname->setWhatsThis(tr("Entrez ici le pseudo que vous utiliserez sur le chat. A contrario de la commande /pseudo, ce pseudo sera automatiquement appliqué à chaque connexion."));
            h_la->addWidget(new QLabel(tr("Pseudo :")));
            h_la->addWidget(m_nickname);
        }

    }

    {
        QGroupBox *gb = new QGroupBox(tr("Interface"));
        la->addWidget(gb);
        QVBoxLayout* v_la = new QVBoxLayout;
        gb->setLayout(v_la);
        {
        QHBoxLayout* h_la = new QHBoxLayout;
        v_la->addLayout(h_la);
        m_selectInterface = new QPushButton("...", this);
        m_selectInterface->setWhatsThis(tr("Parcourir le disque dur..."));
        connect(m_selectInterface, SIGNAL(pressed()), this, SLOT(selectInterface()));
        m_interfacePath = new QLineEdit(m_settings->value(PARAM_INTERFACE, DEFAULT_INTERFACE).toString(), this);
        connect(m_interfacePath, SIGNAL(returnPressed()), this, SLOT(openInterface()));
        h_la->addWidget(m_interfacePath);
        h_la->addWidget(m_selectInterface);
        }

        {
        QHBoxLayout* h_la = new QHBoxLayout;
        v_la->addLayout(h_la);

        m_saveInterface = new QPushButton(tr("Sauvegarder"), this);
        m_saveInterface->setWhatsThis(tr("Sauvegarder une interface."));
        connect(m_saveInterface, SIGNAL(pressed()), this, SLOT(saveInterface()));
        h_la->addWidget(m_saveInterface);

        m_openInterface = new QPushButton(tr("Charger"), this);
        m_openInterface->setWhatsThis(tr("Charger l'interface marquée plus haut."));
        connect(m_openInterface, SIGNAL(pressed()), this, SLOT(openInterface()));
        h_la->addWidget(m_openInterface);
        }
    }

    {
        QGroupBox *gb = new QGroupBox(tr("Thème"));
        la->addWidget(gb);
        QVBoxLayout* v_la = new QVBoxLayout;
        gb->setLayout(v_la);
        QHBoxLayout* h_la = new QHBoxLayout;
        v_la->addLayout(h_la);
        m_selectCSS = new QPushButton("...", this);
        m_selectCSS->setWhatsThis(tr("Parcourir le disque dur..."));
        connect(m_selectCSS, SIGNAL(pressed()), this, SLOT(selectCSS()));
        m_CSSPath = new QLineEdit(m_settings->value(PARAM_CSS).toString(), this);
        connect(m_CSSPath, SIGNAL(returnPressed()), this, SLOT(openCSS()));
        h_la->addWidget(m_CSSPath);
        h_la->addWidget(m_selectCSS);

        m_openCSS = new QPushButton(tr("Charger"), this);
        m_openCSS->setWhatsThis(tr("Charger la feuille de style indiquée plus haut."));
        connect(m_openCSS, SIGNAL(pressed()), this, SLOT(openCSS()));
        v_la->addWidget(m_openCSS);
    }

    {
        QGroupBox *gb = new QGroupBox(tr("Paramètres de connexion"));
        gb->setWhatsThis(tr("Ces options ne sont disponibles que lorsque vous n'êtes pas connecté à un serveur."));
        la->addWidget(gb);
        QVBoxLayout* v_la = new QVBoxLayout;
        gb->setLayout(v_la);

        v_la->addWidget(new QLabel(tr("Addresse IP et port du serveur :")));

        QHBoxLayout* h_la = new QHBoxLayout;
//.........这里部分代码省略.........
开发者ID:DPSLynix,项目名称:celendel,代码行数:101,代码来源:ClientSettings.cpp


示例15: setupUi


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ prev函数代码示例发布时间:2022-05-30
下一篇:
C++ pressanykey函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap