本文整理汇总了C++中postMessage函数的典型用法代码示例。如果您正苦于以下问题:C++ postMessage函数的具体用法?C++ postMessage怎么用?C++ postMessage使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了postMessage函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: switch
void crashutils::onSelect(entry *selectedEntry, int selItemIndex)
{
//...
switch (selectedEntry->type)
{
case 1: postMessage(MSG_SELECT_SVTX, (param)selectedEntry, (param)selItemIndex); break;
case 3: postMessage(MSG_SELECT_WGEO, (param)selectedEntry); break;
case 7: postMessage(MSG_SELECT_ZDAT, (param)selectedEntry); break;
case 11: postMessage(MSG_SELECT_GOOL, (param)selectedEntry); break;
}
}
开发者ID:Almamu,项目名称:crashutils,代码行数:11,代码来源:crashutils.cpp
示例2: while
//---------------------------------------------------------------------------
void __fastcall TMessGen::Timer2Timer(TObject *Sender)
{
TBytes ab;
int length;
UnicodeString host = IdUDPClient1->Host;
WORD port = IdUDPClient1->Port;
Timer2->Enabled = 0;
ab.Length = 1000;
try {
while ((length = IdUDPClient1->ReceiveBuffer(ab, host, port, 100)) > 0) {
BYTE *data = new BYTE[length];
for (int i = 0; i <length; ++i) {
data[i] = ab[i];
}
// message("RX: %s:%d [%d]: %d/%d (%d) %s",
// AnsiString(IdUDPClient1->Host).c_str(), IdUDPClient1->Port, length,
// data[0], data[1], *(WORD*)(data+2), data + 8);
switch (data[1]) {
case 0: // registration response
// message(" Registration response");
break;
case 2: // response
// message(" %04X/%d %s", *(DWORD*)(data+32), *(DWORD*)(data+32+4), data+32+8);
postMessage(*(DWORD*)(data+32), *(DWORD*)(data+32+4));
break;
case 90:
// message(" Setup has been changed");
postMessage(2, 0);
break;
case 98:
// message(" Message: %s", data+32);
break;
case 99:
// message(" Error %d[%08X]", *(DWORD*)(data+32), *(DWORD*)(data+32));
break;
default:
// message("Unknown message type %d/%d", data[1]);
break;
}
}
}
catch (...) {
// message("Connection broken");
}
Timer2->Enabled = 1;
}
开发者ID:selwynjackson,项目名称:MessageGenerator,代码行数:49,代码来源:MessageGeneratorMain.cpp
示例3: msgWork
void msgWork(const Pothos::Packet &inPkt)
{
//calculate conversion and buffer sizes (round up)
const size_t numSyms = (inPkt.payload.length + _mod - 1)/_mod;
//create a new packet for output symbols
Pothos::Packet outPkt;
auto outPort = this->output(0);
outPkt.payload = outPort->getBuffer(numSyms);
//perform conversion
auto in = inPkt.payload.as<const unsigned char*>();
auto out = outPkt.payload.as<unsigned char*>();
switch (_order)
{
case MSBit: ::bitsToSymbolsMSBit(_mod, in, out, numSyms); break;
case LSBit: ::bitsToSymbolsLSBit(_mod, in, out, numSyms); break;
}
//copy and adjust labels
for (const auto &label : inPkt.labels)
{
outPkt.labels.push_back(label.toAdjusted(1, _mod));
}
//post the output packet
outPort->postMessage(outPkt);
}
开发者ID:pothosware,项目名称:pothos-comms,代码行数:28,代码来源:BitsToSymbols.cpp
示例4: QLatin1String
// Logging functions
void MainWindow::postInfoMessage(const QString& msg)
{
static const QString colour = QLatin1String("#3A87AD");
static const QString leader = QLatin1String("Info");
postMessage(colour, leader, msg);
}
开发者ID:DuFace,项目名称:DailyProgrammer,代码行数:8,代码来源:mainwindow.cpp
示例5: work
void work(void)
{
auto inPort = this->input(0);
auto outPort = this->output(0);
inPort->setReserve(_mod);
//handle packet conversion if applicable
if (inPort->hasMessage())
{
auto msg = inPort->popMessage();
if (msg.type() == typeid(Pothos::Packet))
this->msgWork(msg.extract<Pothos::Packet>());
else outPort->postMessage(msg);
return; //output buffer used, return now
}
//calculate work size
const size_t numSyms = std::min(inPort->elements() / _mod, outPort->elements());
if (numSyms == 0) return;
//perform conversion
auto in = inPort->buffer().as<const unsigned char *>();
auto out = outPort->buffer().as<unsigned char *>();
switch (_order)
{
case MSBit: ::bitsToSymbolsMSBit(_mod, in, out, numSyms); break;
case LSBit: ::bitsToSymbolsLSBit(_mod, in, out, numSyms); break;
}
//produce/consume
inPort->consume(numSyms * _mod);
outPort->produce(numSyms);
}
开发者ID:pothosware,项目名称:pothos-comms,代码行数:33,代码来源:BitsToSymbols.cpp
示例6: setRemoteClock
bool Round::RemoteNode::postMessage(uHTTP::HTTPRequest *httpReq, NodeResponse *nodeRes, Error *error) {
// HTTP Request
JSONObject *rootObj = NULL;
if (!postMessage(httpReq, &rootObj, error))
return false;
if (!rootObj->isDictionary()) {
RPC::JSON::ErrorCodeToError(RPC::JSON::ErrorCodeParserError, error);
return false;
}
JSONDictionary *jsonDict = dynamic_cast<JSONDictionary *>(rootObj);
if (!jsonDict) {
RPC::JSON::ErrorCodeToError(RPC::JSON::ErrorCodeParserError, error);
return false;
}
nodeRes->set(jsonDict);
// Update local clock
clock_t remoteTs;
if (nodeRes->getTimestamp(&remoteTs)) {
setRemoteClock(remoteTs);
}
return true;
}
开发者ID:cybergarage,项目名称:round-cc,代码行数:29,代码来源:RemoteNode.cpp
示例7: postMessage
//==============================================================================
void MainContentComponent::handleIncomingMidiMessage (MidiInput* /*source*/, const MidiMessage &message)
{
// This is called on the MIDI thread
if (message.isNoteOnOrOff())
postMessage (new MidiCallbackMessage (message));
}
开发者ID:Neknail,项目名称:JUCE,代码行数:8,代码来源:MainComponent.cpp
示例8: msgWork
void msgWork(const Pothos::Packet &inPkt)
{
//calculate conversion and buffer sizes (round up)
const size_t numBytes = ((inPkt.payload.length + _reserveBytes - 1)/_reserveBytes)*_reserveBytes;
const size_t numSyms = (numBytes*8)/_mod;
//create a new packet for output symbols
Pothos::Packet outPkt;
auto outPort = this->output(0);
if (outPort->elements() >= numSyms)
{
outPkt.payload = outPort->buffer();
outPkt.payload.length = numSyms;
outPort->popBuffer(numSyms);
}
else outPkt.payload = Pothos::BufferChunk(outPort->dtype(), numSyms);
//perform conversion
auto in = inPkt.payload.as<const unsigned char*>();
auto out = outPkt.payload.as<unsigned char*>();
switch (_order)
{
case MSBit: ::bytesToSymbolsMSBit(_mod, in, out, numBytes); break;
case LSBit: ::bytesToSymbolsLSBit(_mod, in, out, numBytes); break;
}
//copy and adjust labels
for (const auto &label : inPkt.labels)
{
outPkt.labels.push_back(label.toAdjusted(8, _mod));
}
//post the output packet
outPort->postMessage(outPkt);
}
开发者ID:xloem,项目名称:pothos,代码行数:35,代码来源:BytesToSymbols.cpp
示例9: yield
void TaoClientTask::requestShutdown()
{
// Need to put a Mutex on the call stack
// Pass the shut down to itself
OsServerTask::requestShutdown();
yield();
if (mpConnectionSocket)
{
TaoMessage msg = TaoMessage(TaoMessage::REQUEST_PROVIDER,
TaoMessage::SHUTDOWN,
0,
0,
(TaoObjHandle)mpConnectionSocket,
0,
"");
postMessage(msg);
}
if(mpTransport)
{
osPrintf("---- TaoClientTask::initInstance: stoping transport\n");
mpTransport->stopListening(); // shut down the transport task
mpTransport->requestShutdown(); // shut down the transport task
}
}
开发者ID:ATHLSolutions,项目名称:sipxecs,代码行数:29,代码来源:TaoClientTask.cpp
示例10: postMessage
void WindowButton::onMenuUp()
{
m_Flags &= ~DEPRESSED;
// post message to listeners
postMessage( WB_MENUUP, StringHash( name() ), 0 );
}
开发者ID:BlackYoup,项目名称:medusa,代码行数:7,代码来源:WindowButton.cpp
示例11: sqrt
void context_plugin_camera_trans::onSmoothTrans(point *apr)
{
doTrans = true;
aprX = ((float)apr->X/0x1000)*8;
aprY = ((float)apr->Y/0x1000)*8;
aprZ = ((float)apr->Z/0x1000)*8;
dirX = (aprX - contextCamera->location.X);
dirY = (aprY - contextCamera->location.Y);
dirZ = (aprZ - contextCamera->location.Z);
float scale = (float) sqrt((dirX*dirX) + (dirY*dirY) + (dirZ*dirZ));
dirX /= scale;
dirY /= scale;
dirZ /= scale;
// 50 = n = number of times a constant
// 'accel' needs to increasingly accumulate and then
// decreasingly decumulate speed such that accumulation
// of position with that updated speed each time will
// reach 'scale'; approx 50 frames for a camera jump
int n = 15;
accel = (scale)/(n*n);
max = accel*((n*(n+1))/2);
speed = 0;
phase = false;
postMessage(GSM_INVALIDATE);
}
开发者ID:Almamu,项目名称:crashutils,代码行数:33,代码来源:camera_trans.cpp
示例12: postMessage
//HANDLED BY context_plugin_section_select
void context_plugin_zone_select::onPoint(int x, int y)
{
if (contextScene->getViewMode() & (SCENE_VIEWMODE_WGEOSINGLE
| SCENE_VIEWMODE_SVTXSINGLE
| SCENE_VIEWMODE_SPRITESINGLE))
return;
bool zoneSel = false;
zone_outline *curOutline;
for (int lp=0; lp<zoneOutlineCount; lp++)
{
curOutline = &zoneOutline[lp];
zoneSel = comp_geom::pointInPolygon2d(x, y, curOutline->outline, curOutline->pointCount);
if (zoneSel)
break;
}
if (zoneSel)
{
entry *zone = curOutline->zone;
postMessage(MSG_SELECT_ZONE, (param)zone);
}
}
开发者ID:Almamu,项目名称:crashutils,代码行数:26,代码来源:zone_select.cpp
示例13: MpStreamFeeder
OsStatus MprFromStream::realize(UtlString* pBuffer,
int flags,
StreamHandle &handle,
OsNotification* pEvent)
{
OsStatus status = OS_INVALID ;
// Create and Initialize Feeder
MpStreamFeeder* pFeeder = new MpStreamFeeder(pBuffer, flags) ;
if (pEvent != NULL)
pFeeder->setEventHandler(pEvent) ;
// Realize
status = pFeeder->realize() ;
// If not successful, cleanup.
if (status == OS_SUCCESS)
{
STREAMDESC* pDesc = new STREAMDESC ;
pDesc->handle = (void*) miStreamCount++ ;
pDesc->pFeeder = pFeeder ;
mStreamList.push(pDesc) ;
handle = pDesc->handle ;
}
else
{
MpFlowGraphMsg msg(SOURCE_DESTROY, this, pFeeder, 0, 0, 0);
postMessage(msg);
}
return status ;
}
开发者ID:ciuc,项目名称:sipxecs,代码行数:32,代码来源:MprFromStream.cpp
示例14: TEST
TEST(chatpresenter, test_postingMessages)
{
Poco::SharedPtr<MockChatService> m(new MockChatService);
Mvp::Presenter::TextChatPresenter presenter(m.get());
Poco::SharedPtr<MockChatView> v(new MockChatView());
EXPECT_CALL(*v, initialize());
ON_CALL(*m, getParticipants())
.WillByDefault(Return(contacts));
ON_CALL(*m, messageHistory(_))
.WillByDefault(Return(messages));
EXPECT_CALL(*m, chatName());
EXPECT_CALL(*v, setChatTitle(_));
EXPECT_CALL(*m, messageHistory(_));
EXPECT_CALL(*m, isConsumer());
EXPECT_CALL(*v, enableControls(_));
EXPECT_CALL(*v, showLeaveAction(_));
EXPECT_CALL(*m, getParticipants());
EXPECT_CALL(*v, setParticipants(_));
presenter.setView(v.get());
EXPECT_CALL(*v, showView());
presenter.showView();
EXPECT_CALL(*m, postMessage(_));
v->triggerPostMessage();
}
开发者ID:goodinges,项目名称:Ciao-Chat,代码行数:29,代码来源:test-textchatpresenter.cpp
示例15: Java_org_skia_viewer_ViewerActivity_onSurfaceChanged
extern "C" JNIEXPORT void JNICALL Java_org_skia_viewer_ViewerActivity_onSurfaceChanged(
JNIEnv* env, jobject activity, jlong handle, jobject surface) {
auto skiaAndroidApp = (SkiaAndroidApp*)handle;
Message message(kSurfaceChanged);
message.fNativeWindow = ANativeWindow_fromSurface(env, surface);
skiaAndroidApp->postMessage(message);
}
开发者ID:VarcoDevs,项目名称:skia,代码行数:7,代码来源:surface_glue_android.cpp
示例16: work
void work(void)
{
auto inputPort = this->input(0);
auto outputPort = this->output(0);
while (inputPort->hasMessage())
{
auto m = inputPort->popMessage();
outputPort->postMessage(m);
}
const auto &buffer = inputPort->buffer();
if (buffer.length != 0)
{
outputPort->postBuffer(buffer);
inputPort->consume(inputPort->elements());
for (size_t i = 0; i < inputPort->elements(); i++)
{
if (std::generate_canonical<double, 10>(_gen) <= _probability)
{
Pothos::Label label;
label.index = i;
label.width = buffer.dtype.size();
if (not _ids.empty()) label.id = _ids.at(_randomId(_gen));
outputPort->postLabel(label);
}
}
}
}
开发者ID:m0x72,项目名称:pothos,代码行数:30,代码来源:SporadicLabeler.cpp
示例17: postMessage
void MessagePort::postMessage(RefPtr<SerializedScriptValue>&& message, MessagePort* port, ExceptionCode& ec)
{
MessagePortArray ports;
if (port)
ports.append(port);
postMessage(WTFMove(message), &ports, ec);
}
开发者ID:emutavchi,项目名称:WebKitForWayland,代码行数:7,代码来源:MessagePort.cpp
示例18: work
void work(void)
{
if (once) return;
once = true;
auto out0 = this->output("out0");
out0->postMessage(42);
}
开发者ID:johnson325,项目名称:pothos,代码行数:7,代码来源:TestTopology.cpp
示例19: work
void work(void)
{
auto outputPort = this->output(0);
//message production
if (_enableMessages)
{
outputPort->postMessage(Pothos::Object());
}
//buffer production
if (_enableBuffers)
{
size_t bytes = outputPort->elements();
if (_bufferMTU != 0) bytes = std::min(bytes, _bufferMTU);
outputPort->produce(bytes);
//label production
if (_enableLabels)
{
Pothos::Label label;
label.index = 0;
outputPort->postLabel(label);
}
}
}
开发者ID:xloem,项目名称:pothos-blocks,代码行数:26,代码来源:InfiniteSource.cpp
示例20: localTag
OsStatus XCpCall::connect(const UtlString& sipCallId,
SipDialog& sipDialog,
const UtlString& toAddress,
const UtlString& fromAddress,
const UtlString& locationHeader,
CP_CONTACT_ID contactId,
SIP_TRANSPORT_TYPE transport,
CP_FOCUS_CONFIG focusConfig,
const UtlString& replacesField,
CP_CALLSTATE_CAUSE callstateCause,
const SipDialog* pCallbackSipDialog)
{
if (sipCallId.isNull() || toAddress.isNull() || fromAddress.isNull())
{
return OS_FAILED;
}
m_focusConfig = focusConfig;
UtlString localTag(m_sipTagGenerator.getNewTag());
sipDialog = SipDialog(sipCallId, localTag, NULL);
AcConnectMsg connectMsg(sipCallId, toAddress, localTag, fromAddress, locationHeader, contactId,
transport, replacesField, callstateCause, pCallbackSipDialog);
return postMessage(connectMsg);
}
开发者ID:Jaroslav23,项目名称:sipxtapi,代码行数:25,代码来源:XCpCall.cpp
注:本文中的postMessage函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论