• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ pop_n_elems函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pop_n_elems函数的典型用法代码示例。如果您正苦于以下问题:C++ pop_n_elems函数的具体用法?C++ pop_n_elems怎么用?C++ pop_n_elems使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pop_n_elems函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: f_bson_buf_find

void f_bson_buf_find(void){
	int size;
	bson b[1];
	bson  sub;
	svalue_t v;
	bson_iterator it;

	size = (sp-1)->u.buf->size;
	bson_init_empty(b);
	bson_init_size( b, size );
	memcpy(b->data, (sp-1)->u.buf->item, size);
	b->finished = 1;

	/* buff不合法 */
	if(bson_size(b) != size){
		pop_n_elems(st_num_arg);
		push_number(0);
		goto free_bson;
	}
	/* 找不到数据 */
	if(!bson_find( &it, b, sp->u.string )){
		pop_n_elems(st_num_arg);
		push_number(0);
		goto free_bson;
	}
	bson_to_v(&it, &v);
	free_buffer((sp-1)->u.buf);
	pop_stack();
	*sp = v;
free_bson:
	bson_destroy( b );
}
开发者ID:carriercomm,项目名称:mudos-1,代码行数:32,代码来源:mg.c


示例2: f_socket_write

void
f_socket_write (void)
{
    int i, fd, port;
    svalue_t *arg;
    char addr[ADDR_BUF_SIZE];
    int num_arg = st_num_arg;

    arg = sp - num_arg + 1;
    if ((num_arg == 3) && (arg[2].type != T_STRING)) {
	bad_arg(3, F_SOCKET_WRITE);
    }
    fd = arg[0].u.number;
    get_socket_address(fd, addr, &port, 0);

    if (VALID_SOCKET("write")) {
	i = socket_write(fd, &arg[1],
			 (num_arg == 3) ? arg[2].u.string : (char *) NULL);
        pop_n_elems(num_arg - 1);
        sp->u.number = i;
    } else {
        pop_n_elems(num_arg - 1);
        sp->u.number = EESECURITY;
    }
}
开发者ID:Yuffster,项目名称:fluffOS,代码行数:25,代码来源:sockets.c


示例3: f_extension

static void f_extension( INT32 args ) {
  int i, found=0;
  struct pike_string *src;
  char *orig, *ptr;

  if(Pike_sp[-1].type != T_STRING)
    SIMPLE_BAD_ARG_ERROR("Caudium.extension", 1, "string");
  src = Pike_sp[-1].u.string;
  if(src->size_shift) {
    Pike_error("Caudium.extension(): Only 8-bit strings allowed.\n");
  }
  orig = src->str;
  for(i = src->len-1; i >= 0; i--) {
    if(orig[i] == 0x2E) {
      found = 1;
      i++;
      break;
    }
  }
  
  if(found) {
    int len = src->len - i;    
    switch(orig[src->len-1]) {
     case '#': case '~':
      /* Remove unix backup extension */
      len--;
    }
    pop_n_elems(args);
    push_string(make_shared_binary_string(orig+i, len));

  } else {
    pop_n_elems(args);
    push_text("");
  }
}
开发者ID:Letractively,项目名称:caudium,代码行数:35,代码来源:caudium.c


示例4: port_listen_fd

/*! @decl int listen_fd(int fd, void|function accept_callback)
 *!
 *! This function does the same as @[bind], except that instead of
 *! creating a new socket and bind it to a port, it expects the file
 *! descriptor @[fd] to be an already open port.
 *!
 *! @note
 *!  This function is only for the advanced user, and is generally used
 *!  when sockets are passed to Pike at exec time.
 *!
 *! @seealso
 *!   @[bind], @[accept]
 */
static void port_listen_fd(INT32 args)
{
  struct port *p = THIS;
  struct svalue *cb = NULL;
  int fd;
  do_close(p);

  get_all_args(NULL, args, "%d.%*", &fd, &cb);

  if(fd<0)
  {
    errno = p->my_errno=EBADF;
    pop_n_elems(args);
    push_int(0);
    return;
  }

  if(fd_listen(fd, 16384) < 0)
  {
    p->my_errno=errno;
    pop_n_elems(args);
    push_int(0);
    return;
  }

  change_fd_for_box (&p->box, fd);
  if(cb) assign_accept_cb (p, cb);
  p->my_errno=0;
  pop_n_elems(args);
  push_int(1);
}
开发者ID:pikelang,项目名称:Pike,代码行数:44,代码来源:socket.c


示例5: f_got_data

static void f_got_data( INT32 args )
{
  struct pf_source *s =
    ((struct callback_prog *)Pike_fp->current_object->storage)->s;

  remove_callbacks( (struct source *)s );

  if( s->str ||
      TYPEOF(Pike_sp[-1]) != PIKE_T_STRING ||
      Pike_sp[-1].u.string->size_shift ||
      Pike_sp[-1].u.string->len == 0)
  {
    s->s.eof = 1;
    pop_n_elems(args);
    push_int(0);
    return;
  }
  s->str = Pike_sp[-1].u.string;
  Pike_sp--;
  pop_n_elems(args-1);
  push_int(0);

  if( s->when_data_cb )
    s->when_data_cb( s->when_data_cb_arg );
}
开发者ID:pikelang,项目名称:Pike,代码行数:25,代码来源:d_source_pikestream.c


示例6: regexp_split

/*! @decl array(string) split(string s)
 *! Works as @[match], but returns an array of the strings that
 *! matched the subregexps. Subregexps are those contained in "( )" in
 *! the regexp. Subregexps that were not matched will contain zero.
 *! If the total regexp didn't match, zero is returned.
 *!
 *! @bugs
 *!   You can currently only have 39 subregexps.
 *!
 *! @bugs
 *!   The current implementation doesn't support searching
 *!   in strings containing the NUL character or any
 *!   wide character.
 *!
 *! @seealso
 *!   @[match]
 */
static void regexp_split(INT32 args)
{
  struct pike_string *s;
  struct regexp *r;

  get_all_args("Regexp.SimpleRegexp->split", args, "%S", &s);

  if(pike_regexec(r=THIS->regexp, s->str))
  {
    int i,j;
    add_ref(s);
    pop_n_elems(args);
    for(j=i=1;i<NSUBEXP;i++)
    {
      if(!r->startp[i] || !r->endp[i])
      {
	push_int(0);
      }else{
	push_string(make_shared_binary_string(r->startp[i],
					      r->endp[i]-r->startp[i]));
	j=i;
      }
    }
    if(j<i-1) pop_n_elems(i-j-1);
    push_array(aggregate_array(j));
    free_string(s);
  }else{
    pop_n_elems(args);
    push_int(0);
  }
}
开发者ID:ajinkya007,项目名称:pike-1,代码行数:48,代码来源:glue.c


示例7: f_compress

void f_compress (void)
{
   unsigned char* buffer;
   unsigned char* input;
   int size;
   buffer_t* real_buffer;
   uLongf new_size;

   if (sp->type == T_STRING) {
      size = SVALUE_STRLEN(sp);
      input = (unsigned char*)sp->u.string;
   } else if (sp->type == T_BUFFER) {
      size = sp->u.buf->size;
      input = sp->u.buf->item;
   } else {
      pop_n_elems(st_num_arg);
      push_undefined();
      return ;
   }

   new_size = size;
   // Make it a little larger as specified in the docs.
   buffer = (unsigned char*)DXALLOC(size * 101 / 100 + 12, TAG_TEMPORARY, "compress");
   compress(buffer, &new_size, input, size);

   // Shrink it down.
   pop_n_elems(st_num_arg);
   real_buffer = allocate_buffer(new_size);
   write_buffer(real_buffer, 0, (char *)buffer, new_size);
   FREE(buffer);
   push_buffer(real_buffer);
}
开发者ID:Yuffster,项目名称:fluffOS,代码行数:32,代码来源:compress.c


示例8: pop_n_elems

/* Note that now, once the master object loads once, there is ALWAYS a
 * master object, so the only way this can fail is if the master object
 * hasn't loaded yet.  In that case, we return (svalue_t *)-1, and the
 * calling routine should let the check succeed. 失败只可能是还没有load进master
  这像是在让master调用函数?   */
svalue_t *apply_master_ob(int  fun, int  num_arg)	/* 将master应用起来? */
{
    if (!master_ob) {
        pop_n_elems(num_arg);	/* 只要master还没有load进来,就将栈清空? */
        return (svalue_t *)-1;
    }

    if (master_applies[fun].func) {		/* 这里会调用不同的函数,函数都在里边? */
#ifdef TRACE
        if (TRACEP(TRACE_APPLY)) {
            do_trace("master apply", master_applies[fun].func->name, "\n");
        }
#endif
        DEBUG_CHECK(master_ob->flags & O_SWAPPED, "Master object swapped!\n");

        call_direct(master_ob, master_applies[fun].index, ORIGIN_DRIVER, num_arg);	/* 像是在调用函数? */

        free_svalue(&apply_ret_value, "apply_master_ob");
        apply_ret_value = *sp--;		/* 从栈中取出返回值 */
        return &apply_ret_value;
    } else {
        pop_n_elems(num_arg);
        return 0;
    }
}
开发者ID:xcw0579,项目名称:mudOS,代码行数:30,代码来源:master.c


示例9: f_reference_allowed

void
f_reference_allowed()
  {
    svalue_t *sv = sp - st_num_arg + 1;
    svalue_t *v;
    object_t *referee = NULL;
    object_t *referrer_obj = command_giver; /* Default to this_player(). */
    const char *referrer_name = NULL;
    int result = 0;
    int num_arg = st_num_arg;

    /* Maybe I could learn how to use this :p 
    CHECK_TYPES(sp-1, T_NUMBER, 1, F_MEMBER_ARRAY); */

    if (sv->type == T_OBJECT && sv->u.ob) {
        referee = sv->u.ob;
    }

    if (st_num_arg > 1) {
        if (sv[1].type == T_STRING && sv[1].u.string) {
            /* We've been passed in a string, now we need to call 
             * find_player() */ 
#ifdef F_FIND_PLAYER
            /* If we have a find_player() efun, then we need to sue 
             * the following method.  This hasn't been tested!
             */ 
             referrer = find_living_object(sv[1].u.string, 1);
#else
            if (simul_efun_ob) {
                push_svalue(&sv[1]);
                v = apply("find_player", simul_efun_ob, 1, ORIGIN_EFUN);

                if (v && v->type == T_OBJECT) {
                    referrer_obj = v->u.ob;
                    referrer_name = sv[1].u.string;
                }
                else {
                    referrer_obj = NULL;
                    referrer_name = sv[1].u.string;
                }
            }
#endif
        }
        if (sv[1].type == T_OBJECT && sv[1].u.ob) { 
            referrer_obj = sv[1].u.ob;
            referrer_name = NULL;
        }
    }

    if (referee && (referrer_obj || referrer_name)) {
        result = reference_allowed(referee, referrer_obj, referrer_name);

        pop_n_elems(num_arg);
        push_number(result);
    } else { 
        pop_n_elems(num_arg);
        push_undefined();
    }
}
开发者ID:Yuffster,项目名称:fluffOS,代码行数:59,代码来源:dwlib.c


示例10: f_tokenize

/*! @decl array(array(string)|string) tokenize(string code)
 *!
 *!   Tokenize a string of Pike tokens.
 *!
 *! @returns
 *!   Returns an array with Pike-level tokens and the remainder (a
 *!   partial token), if any.
 */
static void f_tokenize( INT32 args )
{
  struct array *res;
  struct pike_string *left_s = NULL; /* Make gcc happy. */
  struct pike_string *data;
  int left;
  ONERROR tmp;

  get_all_args("tokenize", args, "%W", &data);

  if(!data->len)
  {
    pop_n_elems(args);
    push_empty_array();
    push_empty_string();
    f_aggregate(2);
    return;
  }

  res = allocate_array_no_init( 0, 128 );
  SET_ONERROR(tmp, do_free_arrayptr, &res);
  
  switch(data->size_shift)
  {
    case 0:
      left = tokenize0(&res, STR0(data), data->len);
      left_s = make_shared_binary_string0(STR0(data)+left, data->len-left);
      break;
    case 1:
      left = tokenize1(&res, STR1(data), data->len);
      left_s = make_shared_binary_string1(STR1(data)+left, data->len-left);
      break;
    case 2:
      left = tokenize2(&res,STR2(data), data->len);
      left_s = make_shared_binary_string2(STR2(data)+left, data->len-left);
      break;
#ifdef PIKE_DEBUG
    default:
      Pike_error("Unknown shift size %d.\n", data->size_shift);
#endif
  }

  UNSET_ONERROR(tmp);
  pop_n_elems(args);
  if (!res->size) {
    free_array(res);
    push_empty_array();
  }
  else
    push_array(res);
  push_string( left_s );
  f_aggregate( 2 );
}
开发者ID:ajinkya007,项目名称:pike-1,代码行数:61,代码来源:pike.c


示例11: image_orient4

void image_orient4(INT32 args)
{
  struct object *o[5];
  struct image *img[5];

  CHECK_INIT();

  pop_n_elems(args);
  _image_orient(THIS,o,img);

  pop_n_elems(1);
  f_aggregate(4);
}
开发者ID:pikelang,项目名称:Pike,代码行数:13,代码来源:orient.c


示例12: free_input

/* Free an input */
static INLINE void free_input(input *inp) {
  ninputs--;
  switch(inp->type) {
  case NBIO_STR:
    DERR(fprintf(stderr, "Freeing string input 0x%x\n", (unsigned int)inp));
    free_string(inp->u.data);
    nstrings--;
    break;
#ifdef USE_MMAP
  case NBIO_MMAP:
    DERR(fprintf(stderr, "Freeing mmap input 0x%x\n", (unsigned int)inp));
    if(inp->u.mmap_storage->data != MAP_FAILED) {
      munmap(inp->u.mmap_storage->data, inp->u.mmap_storage->m_len);
      mmapped -= inp->u.mmap_storage->m_len;
    }
    push_int(0);    push_int(0);    push_int(0);
    apply_low(inp->u.mmap_storage->file, inp->set_nb_off, 3);
    apply_low(inp->u.mmap_storage->file, inp->set_b_off, 0);
    pop_n_elems(2);
    free_object(inp->u.mmap_storage->file);
    free(inp->u.mmap_storage);
    break;
#endif
  case NBIO_OBJ:
    push_int(0);    push_int(0);    push_int(0);
    apply_low(inp->u.file, inp->set_nb_off, 3);
    apply_low(inp->u.file, inp->set_b_off, 0);
    pop_n_elems(2);
    /* FALL THROUGH */
    
  case NBIO_BLOCK_OBJ:
    DERR(fprintf(stderr, "Freeing obj input 0x%x\n", (unsigned int)inp));
    free_object(inp->u.file);
    nobjects--;
    break;
    
  }
  if(THIS->last_input == inp)
    THIS->last_input = NULL;
  THIS->inputs = inp->next;
  if(!THIS->finished && THIS->inputs && THIS->inputs->type == NBIO_OBJ) {
    /* Aha! Set read callback here */
    DERR(fprintf(stderr, "Setting read/close callbacks for input 0x%x\n", (unsigned int)THIS->inputs));
    push_callback(input_read_cb_off);
    push_int(0);
    push_callback(input_close_cb_off);
    apply_low(THIS->inputs->u.file, THIS->inputs->set_nb_off, 3);
    THIS->inputs->mode = READING;    
  }
  free(inp);
}
开发者ID:Letractively,项目名称:caudium,代码行数:52,代码来源:nb_send.c


示例13: f_external_start

void f_external_start (void)
{
	int fd, num_arg = st_num_arg;
	svalue_t *arg = sp - num_arg + 1;

	if (check_valid_socket("external", -1, current_object, "N/A", -1)) {
		fd = external_start(arg[0].u.number, arg + 1,
				arg + 2, arg + 3, (num_arg == 5 ? arg + 4 : 0));
		pop_n_elems(num_arg - 1);
		sp->u.number = fd;
	} else {
		pop_n_elems(num_arg - 1);
		sp->u.number = EESECURITY;
	}
}
开发者ID:Elohim,项目名称:FGmud,代码行数:15,代码来源:external.c


示例14: pipe_read_input_callback

static void pipe_read_input_callback(INT32 args)
{
  struct input *i;
  struct pike_string *s;

  if (args<2 || sp[1-args].type!=T_STRING)
    Pike_error("Illegal argument to pipe->read_input_callback\n");
   
  i=THIS->firstinput;

  if (!i)
    Pike_error("Pipe read callback without any inputs left.\n");

  s=sp[1-args].u.string;

  if(append_buffer(s))
  {
    /* THIS DOES NOT WORK */
    push_int(0);
    push_int(0);
    push_callback(offset_input_close_callback);
    apply_low(i->u.obj,i->set_nonblocking_offset,3);
    pop_stack();
    THIS->sleeping=1;
  }

  low_start();
  pop_n_elems(args-1);
}
开发者ID:ajinkya007,项目名称:pike-1,代码行数:29,代码来源:pipe.c


示例15: f_all

/*! @decl mapping(string:string) all(string map)
 *!
 *! Returns the whole map as a mapping.
 *!
 *! @[map] is the YP-map to search in. This must be the full map name,
 *! you have to use @tt{[email protected]} instead of just @tt{[email protected]}.
 */
static void f_all(INT32 args)
{
  int err, num=0;
  char *retval, *retkey;
  int retlen, retkeylen;
  char *map;
  struct mapping *res_map;
  check_all_args(NULL, args, BIT_STRING, 0);

  map = sp[-1].u.string->str;
  res_map = allocate_mapping( (this->last_size?this->last_size+2:40) );

  if(!(err = yp_first(this->domain, map, &retkey,&retkeylen, &retval,&retlen)))
    do {
      push_string(make_shared_binary_string(retkey, retkeylen));
      push_string(make_shared_binary_string(retval, retlen));
      mapping_insert( res_map, sp-2, sp-1 );
      pop_stack(); pop_stack();

      err = yp_next(this->domain, map, retkey, retkeylen,
		    &retkey, &retkeylen, &retval, &retlen);
      num++;
    } while(!err);

  if(err != YPERR_NOMORE)
  {
    free_mapping( res_map );
    YPERROR( err );
  }

  this->last_size = num;
  pop_n_elems(args);
  push_mapping( res_map );
}
开发者ID:pikelang,项目名称:Pike,代码行数:41,代码来源:yp.c


示例16: f_bindtextdomain

/*! @decl string bindtextdomain(string|void domainname, string|void dirname)
 *!
 *! Binds the path predicate for a message @[domainname] domainname to
 *! the directory name specified by @[dirname].
 *!
 *! If @[domainname] is a non-empty string and has not been bound
 *! previously, bindtextdomain() binds @[domainname] with @[dirname].
 *!
 *! If @[domainname] is a non-empty string and has been bound previously,
 *! bindtextdomain() replaces the old binding with @[dirname].
 *!
 *! The @[dirname] argument can be an absolute or relative pathname
 *! being resolved when @[gettext()], @[dgettext()] or @[dcgettext()]
 *! are called.
 *!
 *! If @[domainname] is zero or an empty string, @[bindtextdomain()]
 *! returns 0.
 *!
 *! User defined domain names cannot begin with the string @expr{"SYS_"@}.
 *! Domain names beginning with this string are reserved for system use.
 *!
 *! @returns
 *!   The return value from @[bindtextdomain()] is a string containing
 *!   @[dirname] or the directory binding associated with @[domainname] if
 *!   @[dirname] is unspecified. If no binding is found, the default locale
 *!   path is returned. If @[domainname] is unspecified or is an empty string,
 *!   @[bindtextdomain()] takes no action and returns a 0.
 *!
 *! @seealso
 *!   @[textdomain], @[gettext], @[setlocale], @[localeconv]
 */
void f_bindtextdomain(INT32 args)
{
  char *returnstring;
  const char *domain = NULL, *dirname = NULL;
  get_all_args (NULL, args, ".%C%C", &domain, &dirname);

  if (!domain || !*domain)
    returnstring = NULL;
  else {
#ifdef BINDTEXTDOMAIN_HANDLES_NULL
    returnstring = bindtextdomain (domain, dirname);
#else
    if (dirname)
      returnstring = bindtextdomain (domain, dirname);
    else
      /* Awkward, but not much we can do. Still better than a
       * coredump.. */
      Pike_error ("Pike has been compiled with a version of libintl "
		  "that doesn't support NULL as directory name.\n");
#endif
  }

  pop_n_elems(args);
  if(returnstring == NULL)
    push_int(0);
  else
    push_text(returnstring);
}
开发者ID:pikelang,项目名称:Pike,代码行数:59,代码来源:gettext.c


示例17: f__xpm_trim_rows

/*! @decl array(string) _xpm_trim_rows(array(string) rows)
 */
void f__xpm_trim_rows( INT32 args )
{
  struct array *a;
  int i,j=0;
  get_all_args("_xpm_trim_rows", args, "%a", &a );
  for(i=0; i<a->size; i++)
  {
    int len,start;
    struct pike_string *s = a->item[i].u.string;
    if(a->item[i].type != T_STRING)
      Pike_error("Array must be array(string).\n");
    if(s->len > 4)
    {
      for(start=0; start<s->len; start++)
        if(s->str[start] == '/' || s->str[start] == '"')
          break;
      if(s->str[start] == '/')
        continue;
      for(len=start+1; len<s->len; len++)
        if(s->str[len] == '"')
          break;
      if(len>=s->len || s->str[len] != '"')
        continue;
      free_string(a->item[j].u.string);
      a->item[j++].u.string=make_shared_binary_string(s->str+start+1,len-start-1);
    }
  }
  pop_n_elems(args-1);
}
开发者ID:ajinkya007,项目名称:pike-1,代码行数:31,代码来源:_xpm.c


示例18: f_crypt_md5

static void f_crypt_md5(INT32 args)
{
  char salt[8];
  char *ret, *saltp ="";
  char *choice =
    "cbhisjKlm4k65p7qrJfLMNQOPxwzyAaBDFgnoWXYCZ0123tvdHueEGISRTUV89./";
 
  if (args < 1)
    SIMPLE_TOO_FEW_ARGS_ERROR("crypt_md5", 1);

  if (Pike_sp[-args].type != T_STRING)
    SIMPLE_BAD_ARG_ERROR("crypt_md5", 1, "string");

  if (args > 1)
  {
    if (Pike_sp[1-args].type != T_STRING)
      SIMPLE_BAD_ARG_ERROR("crypt_md5", 2, "string");

    saltp = Pike_sp[1-args].u.string->str;
  } else {
    unsigned int i, r;
   for (i = 0; i < sizeof(salt); i++) 
    {
      r = my_rand();
      salt[i] = choice[r % (size_t) strlen(choice)];
    }
    saltp = salt;
  }

  ret = (char *)crypt_md5(Pike_sp[-args].u.string->str, saltp);

  pop_n_elems(args);
  push_string(make_shared_string(ret));
}
开发者ID:ajinkya007,项目名称:societyserver,代码行数:34,代码来源:md5_pike.c


示例19: f_parse_headers

static void f_parse_headers( INT32 args )
{
  struct mapping *headermap;
  struct pike_string *headers;
  unsigned char *ptr;
  int len = 0, parsed = 0;
  get_all_args("Caudium.parse_headers", args, "%S", &headers);
  headermap = allocate_mapping(1);
  ptr = (unsigned char *)headers->str;
  len = headers->len;
  /*
   * FIXME:
   * What do we do if memory allocation fails halfway through
   * allocating a new mapping? Should we return that half-finished
   * mapping or rather return NULL? For now it's the former case.
   * /Grendel
   *
   * If memory allocation fails, just bail out with error()
   */
  while(len > 0 &&
        (parsed = get_next_header(ptr, len, headermap)) >= 0 ) {
    ptr += parsed;
    len -= parsed;
  }
  if(parsed == -1) {
    Pike_error("Caudium.parse_headers(): Out of memory while parsing.\n");
  }
  pop_n_elems(args);
  push_mapping(headermap);
}
开发者ID:Letractively,项目名称:caudium,代码行数:30,代码来源:caudium.c


示例20: f_async_write

void f_async_write(){
    function_to_call_t *cb = get_cb();
    process_efun_callback(3, cb, F_ASYNC_WRITE);
    cb->f.fp->hdr.ref++;
    add_write(check_valid_path((sp-3)->u.string, current_object, "write_file", 1), (sp-2)->u.string, strlen((sp-2)->u.string), (sp-1)->u.number, cb);
    pop_n_elems(4);
}
开发者ID:Hobbitron,项目名称:tmi2_fluffos_v3,代码行数:7,代码来源:async.c



注:本文中的pop_n_elems函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ pop_number函数代码示例发布时间:2022-05-30
下一篇:
C++ pop_heap函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap