C++ pnp_irq函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pnp_irq函数的典型用法代码示例。如果您正苦于以下问题：C++ pnp_irq函数的具体用法？C++ pnp_irq怎么用？C++ pnp_irq使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pnp_irq函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: setup_asuscom

int __init
setup_asuscom(struct IsdnCard *card)
{
	char tmp[64];

	strcpy(tmp, Asuscom_revision);
	printk(KERN_INFO "HiSax: Asuscom ISDNLink driver Rev. %s\n", HiSax_getrev(tmp));
#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_card *pb;
		struct pnp_dev *pd;

		while(adev->card_vendor) {
			if ((pb = pnp_find_card(adev->card_vendor,
						adev->card_device,
						pnp_c))) {
				pnp_c = pb;
				pd = NULL;
				if ((pd = pnp_find_dev(pnp_c,
						       adev->vendor,
						       adev->function,
						       pd))) {
					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)adev->driver_data);
					if (pnp_device_attach(pd) < 0) {
						printk(KERN_ERR "AsusPnP: attach failed\n");
						return 0;
					}
					if (pnp_activate_dev(pd) < 0) {
						printk(KERN_ERR "AsusPnP: activate failed\n");
						pnp_device_detach(pd);
						return 0;
					}
					if (!pnp_irq_valid(pd, 0) || !pnp_port_valid(pd, 0)) {
						printk(KERN_ERR "AsusPnP:some resources are missing %ld/%lx\n",
							pnp_irq(pd, 0), pnp_port_start(pd, 0));
						pnp_device_detach(pd);
						return(0);
					}
					card->para[1] = pnp_port_start(pd, 0);
					card->para[0] = pnp_irq(pd, 0);
					break;
				} else {
					printk(KERN_ERR "AsusPnP: PnP error card found, no device\n");
				}
			}
			adev++;
			pnp_c=NULL;
		} 
		if (!adev->card_vendor) {
			printk(KERN_INFO "AsusPnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	if (asuscom_probe(card->cs, card) < 0)
		return 0;
	return 1;
}

开发者ID:sarnobat，项目名称:knoppix，代码行数:59，代码来源:asuscom.c

示例2: snd_mpu401_pnp

static int __devinit snd_mpu401_pnp(int dev, struct pnp_dev *device,
				 const struct pnp_device_id *id)
{
	if (!pnp_port_valid(device, 0) ||
	    pnp_port_flags(device, 0) & IORESOURCE_DISABLED) {
		snd_printk(KERN_ERR "no PnP port\n");
		return -ENODEV;
	}
	if (pnp_port_len(device, 0) < IO_EXTENT) {
		snd_printk(KERN_ERR "PnP port length is %llu, expected %d\n",
			   (unsigned long long)pnp_port_len(device, 0),
			   IO_EXTENT);
		return -ENODEV;
	}
	port[dev] = pnp_port_start(device, 0);

	if (!pnp_irq_valid(device, 0) ||
	    pnp_irq_flags(device, 0) & IORESOURCE_DISABLED) {
		snd_printk(KERN_WARNING "no PnP irq, using polling\n");
		irq[dev] = -1;
	} else {
		irq[dev] = pnp_irq(device, 0);
	}
	return 0;
}

开发者ID:StephenMacras，项目名称:dsl-n55u-bender，代码行数:25，代码来源:mpu401.c

示例3: idepnp_probe

static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
{
	hw_regs_t hw;
	ide_hwif_t *hwif;
	int index;

	if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
		return -1;

	memset(&hw, 0, sizeof(hw));
	ide_std_init_ports(&hw, pnp_port_start(dev, 0),
				pnp_port_start(dev, 1));
	hw.irq = pnp_irq(dev, 0);
	hw.dma = NO_DMA;

	index = ide_register_hw(&hw, &hwif);

	if (index != -1) {
	    	printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
		pnp_set_drvdata(dev,hwif);
		return 0;
	}

	return -1;
}

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:25，代码来源:ide-pnp.c

示例4: idepnp_probe

static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
{
	hw_regs_t hw;
	ide_hwif_t *hwif;
	int index;

	if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
		return -1;

	ide_setup_ports(&hw, (unsigned long) pnp_port_start(dev, 0),
			generic_ide_offsets,
			(unsigned long) pnp_port_start(dev, 1),
			0, NULL,
//			generic_pnp_ide_iops,
			pnp_irq(dev, 0));

	index = ide_register_hw(&hw, &hwif);

	if (index != -1) {
	    	printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
		pnp_set_drvdata(dev,hwif);
		return 0;
	}

	return -1;
}

开发者ID:wxlong，项目名称:Test，代码行数:26，代码来源:ide-pnp.c

示例5: setup_sedlbauer_isapnp

static int __devinit
setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
{
	struct IsdnCardState *cs = card->cs;
	struct pnp_dev *pnp_d;

	if (!isapnp_present())
		return -1;

	while(ipid->card_vendor) {
		if ((pnp_c = pnp_find_card(ipid->card_vendor,
			ipid->card_device, pnp_c))) {
			pnp_d = NULL;
			if ((pnp_d = pnp_find_dev(pnp_c,
				ipid->vendor, ipid->function, pnp_d))) {
				int err;

				printk(KERN_INFO "HiSax: %s detected\n",
					(char *)ipid->driver_data);
				pnp_disable_dev(pnp_d);
				err = pnp_activate_dev(pnp_d);
				if (err<0) {
					printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
						__func__, err);
					return(0);
				}
				card->para[1] = pnp_port_start(pnp_d, 0);
				card->para[0] = pnp_irq(pnp_d, 0);

				if (!card->para[0] || !card->para[1]) {
					printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
						card->para[0], card->para[1]);
					pnp_disable_dev(pnp_d);
					return(0);
				}
				cs->hw.sedl.cfg_reg = card->para[1];
				cs->irq = card->para[0];
				if (ipid->function == ISAPNP_FUNCTION(0x2)) {
					cs->subtyp = SEDL_SPEED_FAX;
					cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
					*bytecnt = 16;
				} else {
					cs->subtyp = SEDL_SPEED_CARD_WIN;
					cs->hw.sedl.chip = SEDL_CHIP_TEST;
				}

				return (1);
			} else {
				printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
				return(0);
			}
		}
		ipid++;
		pnp_c = NULL;
	} 

	printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
	return -1;
}

开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:59，代码来源:sedlbauer.c

示例6: pnp_is_active

/**
 * pnp_is_active - Determines if a device is active based on its current
 *	resources
 * @dev: pointer to the desired PnP device
 */
int pnp_is_active(struct pnp_dev *dev)
{
	if (!pnp_port_start(dev, 0) && pnp_port_len(dev, 0) <= 1 &&
	    !pnp_mem_start(dev, 0) && pnp_mem_len(dev, 0) <= 1 &&
	    pnp_irq(dev, 0) == -1 && pnp_dma(dev, 0) == -1)
		return 0;
	else
		return 1;
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:14，代码来源:support.c

示例7: serial_pnp_probe

static int
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
	struct uart_8250_port uart;
	int ret, line, flags = dev_id->driver_data;
	struct resource *res = NULL;

	if (flags & UNKNOWN_DEV) {
		ret = serial_pnp_guess_board(dev);
		if (ret < 0)
			return ret;
	}

	memset(&uart, 0, sizeof(uart));
	if (pnp_irq_valid(dev, 0))
		uart.port.irq = pnp_irq(dev, 0);
	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
		res = pnp_get_resource(dev, IORESOURCE_IO, 2);
	else if (pnp_port_valid(dev, 0))
		res = pnp_get_resource(dev, IORESOURCE_IO, 0);
	if (pnp_resource_enabled(res)) {
		uart.port.iobase = res->start;
		uart.port.iotype = UPIO_PORT;
	} else if (pnp_mem_valid(dev, 0)) {
		uart.port.mapbase = pnp_mem_start(dev, 0);
		uart.port.iotype = UPIO_MEM;
		uart.port.flags = UPF_IOREMAP;
	} else
		return -ENODEV;

#ifdef SERIAL_DEBUG_PNP
	printk(KERN_DEBUG
		"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
		       uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
#endif
	if (flags & CIR_PORT) {
		uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
		uart.port.type = PORT_8250_CIR;
	}

	uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
	if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
		uart.port.flags |= UPF_SHARE_IRQ;
	uart.port.uartclk = 1843200;
	uart.port.dev = &dev->dev;

	line = serial8250_register_8250_port(&uart);
	if (line < 0 || (flags & CIR_PORT))
		return -ENODEV;

	pnp_set_drvdata(dev, (void *)((long)line + 1));
	return 0;
}

开发者ID:Babel-builder，项目名称:linux，代码行数:53，代码来源:8250_pnp.c

示例8: snd_card_ad1816a_pnp

static int snd_card_ad1816a_pnp(int dev, struct pnp_card_link *card,
				const struct pnp_card_device_id *id)
{
	struct pnp_dev *pdev;
	int err;

	pdev = pnp_request_card_device(card, id->devs[0].id, NULL);
	if (pdev == NULL)
		return -EBUSY;

	err = pnp_activate_dev(pdev);
	if (err < 0) {
		printk(KERN_ERR PFX "AUDIO PnP configure failure\n");
		return -EBUSY;
	}

	port[dev] = pnp_port_start(pdev, 2);
	fm_port[dev] = pnp_port_start(pdev, 1);
	dma1[dev] = pnp_dma(pdev, 0);
	dma2[dev] = pnp_dma(pdev, 1);
	irq[dev] = pnp_irq(pdev, 0);

	pdev = pnp_request_card_device(card, id->devs[1].id, NULL);
	if (pdev == NULL) {
		mpu_port[dev] = -1;
		snd_printk(KERN_WARNING PFX "MPU401 device busy, skipping.\n");
		return 0;
	}

	err = pnp_activate_dev(pdev);
	if (err < 0) {
		printk(KERN_ERR PFX "MPU401 PnP configure failure\n");
		mpu_port[dev] = -1;
	} else {
		mpu_port[dev] = pnp_port_start(pdev, 0);
		mpu_irq[dev] = pnp_irq(pdev, 0);
	}

	return 0;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:40，代码来源:ad1816a.c

示例9: isapnp_init_one

static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id)
{
	struct ata_host *host;
	struct ata_port *ap;
	void __iomem *cmd_addr, *ctl_addr;
	int irq = 0;
	irq_handler_t handler = NULL;

	if (pnp_port_valid(idev, 0) == 0)
		return -ENODEV;

	if (pnp_irq_valid(idev, 0)) {
		irq = pnp_irq(idev, 0);
		handler = ata_sff_interrupt;
	}

	/* allocate host */
	host = ata_host_alloc(&idev->dev, 1);
	if (!host)
		return -ENOMEM;

	/* acquire resources and fill host */
	cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8);
	if (!cmd_addr)
		return -ENOMEM;

	ap = host->ports[0];

	ap->ops = &isapnp_noalt_port_ops;
	ap->pio_mask = ATA_PIO0;
	ap->flags |= ATA_FLAG_SLAVE_POSS;

	ap->ioaddr.cmd_addr = cmd_addr;

	if (pnp_port_valid(idev, 1)) {
		ctl_addr = devm_ioport_map(&idev->dev,
					   pnp_port_start(idev, 1), 1);
		ap->ioaddr.altstatus_addr = ctl_addr;
		ap->ioaddr.ctl_addr = ctl_addr;
		ap->ops = &isapnp_port_ops;
	}

	ata_sff_std_ports(&ap->ioaddr);

	ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
		      (unsigned long long)pnp_port_start(idev, 0),
		      (unsigned long long)pnp_port_start(idev, 1));

	/* activate */
	return ata_host_activate(host, irq, handler, 0,
				 &isapnp_sht);
}

开发者ID:168519，项目名称:linux，代码行数:52，代码来源:pata_isapnp.c

示例10: cmos_pnp_probe

static int __devinit
cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
	cmos_wake_setup(&pnp->dev);

	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
		return cmos_do_probe(&pnp->dev,
				pnp_get_resource(pnp, IORESOURCE_IO, 0), 8);
	else
		return cmos_do_probe(&pnp->dev,
				pnp_get_resource(pnp, IORESOURCE_IO, 0),
				pnp_irq(pnp, 0));
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:13，代码来源:rtc-cmos.c

示例11: idepnp_probe

static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
    hw_regs_t hw;
    ide_hwif_t *hwif;
    unsigned long base, ctl;

    if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
        return -1;

    base = pnp_port_start(dev, 0);
    ctl = pnp_port_start(dev, 1);

    if (!request_region(base, 8, DRV_NAME)) {
        printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
                DRV_NAME, base, base + 7);
        return -EBUSY;
    }

    if (!request_region(ctl, 1, DRV_NAME)) {
        printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
                DRV_NAME, ctl);
        release_region(base, 8);
        return -EBUSY;
    }

    memset(&hw, 0, sizeof(hw));
    ide_std_init_ports(&hw, base, ctl);
    hw.irq = pnp_irq(dev, 0);
    hw.chipset = ide_generic;

    hwif = ide_find_port();
    if (hwif) {
        u8 index = hwif->index;
        u8 idx[4] = { index, 0xff, 0xff, 0xff };

        ide_init_port_data(hwif, index);
        ide_init_port_hw(hwif, &hw);

        printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
        pnp_set_drvdata(dev, hwif);

        ide_device_add(idx, NULL);

        return 0;
    }

    release_region(ctl, 1);
    release_region(base, 8);

    return -1;
}

开发者ID:274914765，项目名称:C，代码行数:51，代码来源:ide-pnp.c

示例12: generic_NCR5380_pnp_probe

static int generic_NCR5380_pnp_probe(struct pnp_dev *pdev,
			       const struct pnp_device_id *id)
{
	int base, irq;

	if (pnp_activate_dev(pdev) < 0)
		return -EBUSY;

	base = pnp_port_start(pdev, 0);
	irq = pnp_irq(pdev, 0);

	return generic_NCR5380_init_one(&driver_template, &pdev->dev, base, irq,
				       id->driver_data);
}

开发者ID:forgivemyheart，项目名称:linux，代码行数:14，代码来源:g_NCR5380.c

示例13: idepnp_probe

static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
    struct ide_host *host;
    unsigned long base, ctl;
    int rc;
    struct ide_hw hw, *hws[] = { &hw };

#ifdef CONFIG_DEBUG_PRINTK
    printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n");
#else
    ;
#endif

    if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
        return -1;

    base = pnp_port_start(dev, 0);
    ctl = pnp_port_start(dev, 1);

    if (!request_region(base, 8, DRV_NAME)) {
        printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
               DRV_NAME, base, base + 7);
        return -EBUSY;
    }

    if (!request_region(ctl, 1, DRV_NAME)) {
        printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
               DRV_NAME, ctl);
        release_region(base, 8);
        return -EBUSY;
    }

    memset(&hw, 0, sizeof(hw));
    ide_std_init_ports(&hw, base, ctl);
    hw.irq = pnp_irq(dev, 0);

    rc = ide_host_add(&ide_pnp_port_info, hws, 1, &host);
    if (rc)
        goto out;

    pnp_set_drvdata(dev, host);

    return 0;
out:
    release_region(ctl, 1);
    release_region(base, 8);

    return rc;
}

开发者ID:nos1609，项目名称:Chrono_Kernel-1，代码行数:49，代码来源:ide-pnp.c

示例14: cmos_pnp_probe

static int __devinit
cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
		/* Some machines contain a PNP entry for the RTC, but
		 * don't define the IRQ. It should always be safe to
		 * hardcode it in these cases
		 */
		return cmos_do_probe(&pnp->dev,
				pnp_get_resource(pnp, IORESOURCE_IO, 0), 8);
	else
		return cmos_do_probe(&pnp->dev,
				pnp_get_resource(pnp, IORESOURCE_IO, 0),
				pnp_irq(pnp, 0));
}

开发者ID:LouZiffer，项目名称:m900_kernel_cupcake-SDX，代码行数:15，代码来源:rtc-cmos.c

示例15: parport_pc_pnp_probe

static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
{
    struct parport *pdata;
    unsigned long io_lo, io_hi;
    int dma, irq;

    if (pnp_port_valid(dev, 0) && !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED))
    {
        io_lo = pnp_port_start(dev, 0);
    }
    else
        return -EINVAL;

#if 0
        if (pnp_port_valid(dev,1) &&
                !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) {
                io_hi = pnp_port_start(dev,1);
        } else
                io_hi = 0;
#endif

#if 0
        if (pnp_irq_valid(dev,0) &&
                !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
                irq = pnp_irq(dev,0);
        } else
                irq = PARPORT_IRQ_NONE;
#endif

#if 0
        if (pnp_dma_valid(dev,0) &&
                !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) {
                dma = pnp_dma(dev,0);
        } else
                dma = PARPORT_DMA_NONE;
#endif

#if 0
        printk(KERN_INFO "parport: PnPBIOS parport detected.\n");
        if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL)))
                return -ENODEV;

        pnp_set_drvdata(dev,pdata);
#endif
    return 0;
}

开发者ID:nixz，项目名称:covise，代码行数:46，代码来源:genlock.c

示例16: serial_pnp_probe

static int __devinit
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
	struct uart_port port;
	int ret, line, flags = dev_id->driver_data;

	if (flags & UNKNOWN_DEV) {
		ret = serial_pnp_guess_board(dev, &flags);
		if (ret < 0)
			return ret;
	}

	memset(&port, 0, sizeof(struct uart_port));
	if (pnp_irq_valid(dev, 0))
		port.irq = pnp_irq(dev, 0);
	if (pnp_port_valid(dev, 0)) {
		port.iobase = pnp_port_start(dev, 0);
		port.iotype = UPIO_PORT;
	} else if (pnp_mem_valid(dev, 0)) {
		port.mapbase = pnp_mem_start(dev, 0);
		port.iotype = UPIO_MEM;
		port.flags = UPF_IOREMAP;
	} else
		return -ENODEV;

#ifdef SERIAL_DEBUG_PNP
	printk(KERN_DEBUG
		"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
		       port.iobase, port.mapbase, port.irq, port.iotype);
#endif

	port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
	if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
		port.flags |= UPF_SHARE_IRQ;
	port.uartclk = 1843200;
	port.dev = &dev->dev;

	line = serial8250_register_port(&port);
	if (line < 0)
		return -ENODEV;

	pnp_set_drvdata(dev, (void *)((long)line + 1));
	return 0;
}

开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:44，代码来源:8250_pnp.c

示例17: fcpnp_probe

static int __devinit fcpnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
{
	struct fritz_adapter *adapter;
	int retval;

	if (!pdev)
		return(-ENODEV);

	retval = -ENOMEM;
	adapter = new_adapter();
	if (!adapter)
		goto err;

	pnp_set_drvdata(pdev, adapter);

	adapter->type = AVM_FRITZ_PNP;

	pnp_disable_dev(pdev);
	retval = pnp_activate_dev(pdev);
	if (retval < 0) {
		printk(KERN_WARNING "%s: pnp_activate_dev(%s) ret(%d)\n", __func__,
			(char *)dev_id->driver_data, retval);
		goto err_free;
	}
	adapter->io = pnp_port_start(pdev, 0);
	adapter->irq = pnp_irq(pdev, 0);

	printk(KERN_INFO "hisax_fcpcipnp: found adapter %s at IO %#x irq %d\n",
	       (char *) dev_id->driver_data, adapter->io, adapter->irq);

	retval = fcpcipnp_setup(adapter);
	if (retval)
		goto err_free;

	return 0;
	
 err_free:
	delete_adapter(adapter);
 err:
	return retval;
}

开发者ID:1703011，项目名称:asuswrt-merlin，代码行数:41，代码来源:hisax_fcpcipnp.c

示例18: c2_pnp_probe

/* it works in parport_pc's probe function, so why not here?  */
static int c2_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id)
{
  if (pnp_port_valid(dev,0) &&
      !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) {
    io_base = pnp_port_start(dev,0);
  }
  else {
    return -EINVAL;
  }
  if (pnp_irq_valid(dev,0) &&
      !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) {
    irq = pnp_irq(dev,0);
    if (request_irq(irq, c2_interrupt, SA_INTERRUPT, DEVICE_NAME, NULL)) {
      return -EINVAL;
    }
  }
  else {
    return -EINVAL;
  }

  return 0;
}

开发者ID:GBert，项目名称:misc，代码行数:23，代码来源:cygnal_c2.c

示例19: snd_card_es968_pnp

static int __devinit snd_card_es968_pnp(struct snd_card *card, unsigned int n,
					struct pnp_card_link *pcard,
					const struct pnp_card_device_id *pid)
{
	struct snd_es1688 *chip = card->private_data;
	struct pnp_dev *pdev;
	int error;

	pdev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
	if (pdev == NULL)
		return -ENODEV;

	error = pnp_activate_dev(pdev);
	if (error < 0) {
		snd_printk(KERN_ERR "ES968 pnp configure failure\n");
		return error;
	}
	port[n] = pnp_port_start(pdev, 0);
	dma8[n] = pnp_dma(pdev, 0);
	irq[n] = pnp_irq(pdev, 0);

	return snd_es1688_create(card, chip, port[n], mpu_port[n], irq[n],
				 mpu_irq[n], dma8[n], ES1688_HW_AUTO);
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:24，代码来源:es1688.c

示例20: ni_atmio_attach

static int ni_atmio_attach(struct comedi_device *dev,
			   struct comedi_devconfig *it)
{
	struct pnp_dev *isapnp_dev;
	int ret;
	unsigned long iobase;
	int board;
	unsigned int irq;

	/* allocate private area */
	ret = ni_alloc_private(dev);
	if (ret < 0)
		return ret;

	devpriv->stc_writew = &ni_atmio_win_out;
	devpriv->stc_readw = &ni_atmio_win_in;
	devpriv->stc_writel = &win_out2;
	devpriv->stc_readl = &win_in2;

	iobase = it->options[0];
	irq = it->options[1];
	isapnp_dev = NULL;
	if (iobase == 0) {
		ret = ni_isapnp_find_board(&isapnp_dev);
		if (ret < 0)
			return ret;

		iobase = pnp_port_start(isapnp_dev, 0);
		irq = pnp_irq(isapnp_dev, 0);
		devpriv->isapnp_dev = isapnp_dev;
	}

	/* reserve our I/O region */

	printk("comedi%d: ni_atmio: 0x%04lx", dev->minor, iobase);
	if (!request_region(iobase, NI_SIZE, "ni_atmio")) {
		printk(" I/O port conflict\n");
		return -EIO;
	}

	dev->iobase = iobase;

#ifdef DEBUG
	/* board existence sanity check */
	{
		int i;

		printk(" board fingerprint:");
		for (i = 0; i < 16; i += 2) {
			printk(" %04x %02x", inw(dev->iobase + i),
			       inb(dev->iobase + i + 1));
		}
	}
#endif

	/* get board type */

	board = ni_getboardtype(dev);
	if (board < 0)
		return -EIO;

	dev->board_ptr = ni_boards + board;

	printk(" %s", boardtype.name);
	dev->board_name = boardtype.name;

	/* irq stuff */

	if (irq != 0) {
		if (irq > 15 || ni_irqpin[irq] == -1) {
			printk(" invalid irq %u\n", irq);
			return -EINVAL;
		}
		printk(" ( irq = %u )", irq);
		ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS,
				  "ni_atmio", dev);

		if (ret < 0) {
			printk(" irq not available\n");
			return -EINVAL;
		}
		dev->irq = irq;
	}

	/* generic E series stuff in ni_mio_common.c */

	ret = ni_E_init(dev, it);
	if (ret < 0)
		return ret;


	return 0;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:93，代码来源:ni_atmio.c

注：本文中的pnp_irq函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ pnp_port_start函数代码示例发布时间：2022-05-30

C++ pnp_hdr函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19212|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9663|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8660|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ pnp_irq函数代码示例

示例1: setup_asuscom

示例2: snd_mpu401_pnp

示例3: idepnp_probe

示例4: idepnp_probe

示例5: setup_sedlbauer_isapnp

示例6: pnp_is_active

示例7: serial_pnp_probe

示例8: snd_card_ad1816a_pnp

示例9: isapnp_init_one

示例10: cmos_pnp_probe

示例11: idepnp_probe

示例12: generic_NCR5380_pnp_probe

示例13: idepnp_probe

示例14: cmos_pnp_probe

示例15: parport_pc_pnp_probe

示例16: serial_pnp_probe

示例17: fcpnp_probe

示例18: c2_pnp_probe

示例19: snd_card_es968_pnp

示例20: ni_atmio_attach

请发表评论

全部评论

上一篇：

下一篇：

相机标定过程(opencv) + matlab参数导入ope

ashchan/mail-notifr: Mail Notifr - Gmail

TwistedAsylumMC/bedrock-unicode-characte

uber/RIBs: Uber&#39;s cross-platform mob

ajtowf/ng2_play: Angular 2 Play with Mat

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

uber/RIBs: Uber's cross-platform mob