本文整理汇总了C++中png_memcpy函数的典型用法代码示例。如果您正苦于以下问题：C++ png_memcpy函数的具体用法？C++ png_memcpy怎么用？C++ png_memcpy使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了png_memcpy函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: png_create_read_struct
/* Initialize PNG structure for reading, and allocate any memory needed.
This interface is deprecated in favour of the png_create_read_struct(),
and it will eventually disappear. */
void
png_read_init(png_structp png_ptr)
{
jmp_buf tmp_jmp; /* to save current jump buffer */
png_debug(1, "in png_read_init\n");
/* save jump buffer and error functions */
png_memcpy(tmp_jmp, png_ptr->jmpbuf, sizeof (jmp_buf));
/* reset all variables to 0 */
png_memset(png_ptr, 0, sizeof (png_struct));
/* restore jump buffer */
png_memcpy(png_ptr->jmpbuf, tmp_jmp, sizeof (jmp_buf));
/* initialize zbuf - compression buffer */
png_ptr->zbuf_size = PNG_ZBUF_SIZE;
png_ptr->zbuf = (png_bytep)png_malloc(png_ptr,
(png_uint_32)png_ptr->zbuf_size);
png_ptr->zstream.zalloc = png_zalloc;
png_ptr->zstream.zfree = png_zfree;
png_ptr->zstream.opaque = (voidpf)png_ptr;
switch (inflateInit(&png_ptr->zstream))
{
case Z_OK: /* Do nothing */ break;
case Z_MEM_ERROR:
case Z_STREAM_ERROR: png_error(png_ptr, "zlib memory"); break;
case Z_VERSION_ERROR: png_error(png_ptr, "zlib version"); break;
default: png_error(png_ptr, "Unknown zlib error");
}
png_ptr->zstream.next_out = png_ptr->zbuf;
png_ptr->zstream.avail_out = (uInt)png_ptr->zbuf_size;
png_set_read_fn(png_ptr, NULL, NULL);
}
开发者ID:RaymondLiao，项目名称:elektronika，代码行数:40，代码来源:pngread.c
示例2: png_push_fill_buffer
void PNGAPI
png_push_fill_buffer(png_structp png_ptr, png_bytep buffer, png_size_t length)
{
png_bytep ptr;
ptr = buffer;
if (png_ptr->save_buffer_size)
{
png_size_t save_size;
if (length < png_ptr->save_buffer_size)
save_size = length;
else
save_size = png_ptr->save_buffer_size;
png_memcpy(ptr, png_ptr->save_buffer_ptr, save_size);
length -= save_size;
ptr += save_size;
png_ptr->buffer_size -= save_size;
png_ptr->save_buffer_size -= save_size;
png_ptr->save_buffer_ptr += save_size;
}
if (length && png_ptr->current_buffer_size)
{
png_size_t save_size;
if (length < png_ptr->current_buffer_size)
save_size = length;
else
save_size = png_ptr->current_buffer_size;
png_memcpy(ptr, png_ptr->current_buffer_ptr, save_size);
png_ptr->buffer_size -= save_size;
png_ptr->current_buffer_size -= save_size;
png_ptr->current_buffer_ptr += save_size;
}
}
开发者ID:carrierlxk，项目名称:rcc，代码行数:37，代码来源:pngpread.c
示例3: png_default_read_data
static void PNGAPI
png_default_read_data(png_structp png_ptr, png_bytep data, png_size_t length)
{
int check;
png_byte *n_data;
png_FILE_p io_ptr;
if (png_ptr == NULL)
return;
/* Check if data really is near. If so, use usual code. */
n_data = (png_byte *)CVT_PTR_NOCHECK(data);
io_ptr = (png_FILE_p)CVT_PTR(png_ptr->io_ptr);
if ((png_bytep)n_data == data)
{
#if defined(_WIN32_WCE)
if ( !ReadFile((HANDLE)(png_ptr->io_ptr), data, length, &check, NULL) )
check = 0;
#else
check = fread(n_data, 1, length, io_ptr);
#endif
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t read, remaining, err;
check = 0;
remaining = length;
do
{
read = MIN(NEAR_BUF_SIZE, remaining);
#if defined(_WIN32_WCE)
if ( !ReadFile((HANDLE)(io_ptr), buf, read, &err, NULL) )
err = 0;
#else
err = fread(buf, (png_size_t)1, read, io_ptr);
#endif
png_memcpy(data, buf, read); /* copy far buffer to near buffer */
if (err != read)
break;
else
check += err;
data += read;
remaining -= read;
}
while (remaining != 0);
}
if ((png_uint_32)check != (png_uint_32)length)
png_error(png_ptr, "read Error");
}
开发者ID:3gstudent，项目名称:PNG_stego-test，代码行数:49，代码来源:pngrio.c
示例4: png_default_write_data
void PNGAPI
png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
{
png_uint_32 check;
png_byte *near_data; /* Needs to be "png_byte *" instead of "png_bytep" */
png_FILE_p io_ptr;
if (png_ptr == NULL) return;
/* Check if data really is near. If so, use usual code. */
near_data = (png_byte *)CVT_PTR_NOCHECK(data);
io_ptr = (png_FILE_p)CVT_PTR(png_ptr->io_ptr);
if ((png_bytep)near_data == data)
{
#if defined(_WIN32_WCE)
if ( !WriteFile(io_ptr, near_data, length, &check, NULL) )
check = 0;
#else
check = fwrite(near_data, 1, length, io_ptr);
#endif
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t written, remaining, err;
check = 0;
remaining = length;
do
{
written = MIN(NEAR_BUF_SIZE, remaining);
png_memcpy(buf, data, written); /* copy far buffer to near buffer */
#if defined(_WIN32_WCE)
if ( !WriteFile(io_ptr, buf, written, &err, NULL) )
err = 0;
#else
err = fwrite(buf, 1, written, io_ptr);
#endif
if (err != written)
break;
else
check += err;
data += written;
remaining -= written;
}
while (remaining != 0);
}
if (check != length)
png_error(png_ptr, "Write Error");
}
开发者ID:bjornsallarp，项目名称:ipp-resize，代码行数:48，代码来源:pngwio.c
示例5: png_default_read_data
static void PNGCBAPI
png_default_read_data(png_structp png_ptr, png_bytep data, png_size_t length)
{
png_size_t check;
png_byte *n_data;
png_FILE_p io_ptr;
if (png_ptr == NULL)
return;
/* Check if data really is near. If so, use usual code. */
n_data = (png_byte *)CVT_PTR_NOCHECK(data);
io_ptr = (png_FILE_p)CVT_PTR(png_ptr->io_ptr);
if ((png_bytep)n_data == data)
{
check = fread(n_data, 1, length, io_ptr);
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t read, remaining, err;
check = 0;
remaining = length;
do
{
read = MIN(NEAR_BUF_SIZE, remaining);
err = fread(buf, 1, read, io_ptr);
png_memcpy(data, buf, read); /* copy FAR buffer to near buffer */
if (err != read)
break;
else
check += err;
data += read;
remaining -= read;
}
while (remaining != 0);
}
if ((png_uint_32)check != (png_uint_32)length)
png_error(png_ptr, "read Error");
}
开发者ID:Strongc，项目名称:Tesseract_Ocr，代码行数:47，代码来源:pngrio.c
示例6: png_default_write_data
static void
png_default_write_data(png_structp png_ptr, png_bytep data, png_uint_32 length)
{
png_uint_32 check;
png_byte *n_data;
/* Check if data really is near. If so, use usual code. */
#ifdef _MSC_VER
/* do it this way just to quiet warning */
FP_OFF(n_data) = FP_OFF(data);
if (FP_SEG(n_data) == FP_SEG(data))
#else
/* this works in MSC also but with lost segment warning */
n_data = (png_byte *)data;
if ((png_bytep)n_data == data)
#endif
{
check = fwrite(n_data, 1, (png_size_t)length, (FILE *)(png_ptr->io_ptr));
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t written, remaining, err;
check = 0;
remaining = (png_size_t)length;
do
{
written = MIN(NEAR_BUF_SIZE, remaining);
png_memcpy(buf, data, written); /* copy far buffer to near buffer */
err = fwrite(buf, 1, written, (FILE *)(png_ptr->io_ptr));
if (err != written)
break;
else
check += err;
data += written;
remaining -= written;
}
while (remaining != 0);
}
if (check != length)
{
png_error(png_ptr, "Write Error");
}
}
开发者ID:deepmatrix，项目名称:blaxxun-cc3d，代码行数:44，代码来源:pngwio.c
示例7: png_convert_to_rfc1123
/* Convert the supplied time into an RFC 1123 string suitable for use in
* a "Creation Time" or other text-based time string.
*/
png_charp PNGAPI
png_convert_to_rfc1123(png_structp png_ptr, png_timep ptime)
{
static PNG_CONST char short_months[12][4] =
{"Jan", "Feb", "Mar", "Apr", "May", "Jun",
"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
if (png_ptr->time_buffer == NULL)
{
png_ptr->time_buffer = (png_charp)png_malloc(png_ptr, (png_uint_32)(29*
sizeof(char)));
}
#if defined(_WIN32_WCE)
{
wchar_t time_buf[29];
wsprintf(time_buf, TEXT("%d %S %d %02d:%02d:%02d +0000"),
ptime->day % 32, short_months[(ptime->month - 1) % 12],
ptime->year, ptime->hour % 24, ptime->minute % 60,
ptime->second % 61);
WideCharToMultiByte(CP_ACP, 0, time_buf, -1, png_ptr->time_buffer, 29,
NULL, NULL);
}
#else
#ifdef USE_FAR_KEYWORD
{
char near_time_buf[29];
sprintf(near_time_buf, "%d %s %d %02d:%02d:%02d +0000",
ptime->day % 32, short_months[(ptime->month - 1) % 12],
ptime->year, ptime->hour % 24, ptime->minute % 60,
ptime->second % 61);
png_memcpy(png_ptr->time_buffer, near_time_buf,
29*sizeof(char));
}
#else
sprintf(png_ptr->time_buffer, "%d %s %d %02d:%02d:%02d +0000",
ptime->day % 32, short_months[(ptime->month - 1) % 12],
ptime->year, ptime->hour % 24, ptime->minute % 60,
ptime->second % 61);
#endif
#endif /* _WIN32_WCE */
return ((png_charp)png_ptr->time_buffer);
}
开发者ID:saintsoftware，项目名称:ge3d，代码行数:46，代码来源:png_sub.c
示例8: png_set_PLTE
void PNGAPI
png_set_PLTE(png_structp png_ptr, png_infop info_ptr,
png_const_colorp palette, int num_palette)
{
png_debug1(1, "in %s storage function", "PLTE");
if (png_ptr == NULL || info_ptr == NULL)
return;
if (num_palette < 0 || num_palette > PNG_MAX_PALETTE_LENGTH)
{
if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE)
png_error(png_ptr, "Invalid palette length");
else
{
png_warning(png_ptr, "Invalid palette length");
return;
}
}
/* It may not actually be necessary to set png_ptr->palette here;
* we do it for backward compatibility with the way the png_handle_tRNS
* function used to do the allocation.
*/
png_free_data(png_ptr, info_ptr, PNG_FREE_PLTE, 0);
/* Changed in libpng-1.2.1 to allocate PNG_MAX_PALETTE_LENGTH instead
* of num_palette entries, in case of an invalid PNG file that has
* too-large sample values.
*/
png_ptr->palette = (png_colorp)png_calloc(png_ptr,
PNG_MAX_PALETTE_LENGTH * png_sizeof(png_color));
png_memcpy(png_ptr->palette, palette, num_palette * png_sizeof(png_color));
info_ptr->palette = png_ptr->palette;
info_ptr->num_palette = png_ptr->num_palette = (png_uint_16)num_palette;
info_ptr->free_me |= PNG_FREE_PLTE;
info_ptr->valid |= PNG_INFO_PLTE;
}
开发者ID:robn，项目名称:pioneer-thirdparty，代码行数:43，代码来源:pngset.c
示例9: png_read_tRNS
void
png_read_tRNS(png_structp png_ptr, png_infop info,
png_bytep trans, int num_trans, png_color_16p trans_values)
{
if (!png_ptr || !info)
return;
if (trans)
{
info->trans = trans;
}
else
{
png_memcpy(&(info->trans_values), trans_values,
sizeof(png_color_16));
}
info->num_trans = (png_uint_16)num_trans;
info->valid |= PNG_INFO_tRNS;
}
开发者ID:deepmatrix，项目名称:blaxxun-cc3d，代码行数:19，代码来源:pngrcb.c
示例10: png_read_zTXt
void
png_read_zTXt(png_structp png_ptr, png_infop info,
png_charp key, png_charp text, png_uint_32 text_len, int compression)
{
if (!png_ptr || !info)
return;
if (info->max_text <= info->num_text)
{
if (info->text)
{
png_uint_32 old_max;
old_max = info->max_text;
info->max_text = info->num_text + 16;
{
png_textp old_text;
old_text = info->text;
info->text = (png_textp)png_large_malloc(png_ptr,
info->max_text * sizeof (png_text));
png_memcpy(info->text, old_text,
(png_size_t)(old_max * sizeof (png_text)));
png_large_free(png_ptr, old_text);
}
}
else
{
info->max_text = 16;
info->num_text = 0;
info->text = (png_textp)png_large_malloc(png_ptr,
info->max_text * sizeof (png_text));
}
}
info->text[info->num_text].key = key;
info->text[info->num_text].text = text;
info->text[info->num_text].text_length = text_len;
info->text[info->num_text].compression = compression;
info->num_text++;
}
开发者ID:deepmatrix，项目名称:blaxxun-cc3d，代码行数:41，代码来源:pngrcb.c
示例11: png_set_tIME
void PNGAPI
png_set_tIME(png_structp png_ptr, png_infop info_ptr, png_const_timep mod_time)
{
png_debug1(1, "in %s storage function", "tIME");
if (png_ptr == NULL || info_ptr == NULL ||
(png_ptr->mode & PNG_WROTE_tIME))
return;
if (mod_time->month == 0 || mod_time->month > 12 ||
mod_time->day == 0 || mod_time->day > 31 ||
mod_time->hour > 23 || mod_time->minute > 59 ||
mod_time->second > 60)
{
png_warning(png_ptr, "Ignoring invalid time value");
return;
}
png_memcpy(&(info_ptr->mod_time), mod_time, png_sizeof(png_time));
info_ptr->valid |= PNG_INFO_tIME;
}
开发者ID:robn，项目名称:pioneer-thirdparty，代码行数:21，代码来源:pngset.c
示例12: png_set_tRNS
void
png_set_tRNS(png_structp png_ptr, png_infop info_ptr,
png_bytep trans, int num_trans, png_color_16p trans_values)
{
png_debug1(1, "in %s storage function\n", "tRNS");
if (png_ptr == NULL || info_ptr == NULL)
return;
if (trans != NULL)
info_ptr->trans = trans;
if (trans_values != NULL)
{
png_memcpy(&(info_ptr->trans_values), trans_values,
sizeof(png_color_16));
if (num_trans == 0)
num_trans = 1;
}
info_ptr->num_trans = (png_uint_16)num_trans;
info_ptr->valid |= PNG_INFO_tRNS;
}
开发者ID:AMDmi3，项目名称:analog，代码行数:21，代码来源:pngset.c
示例13: pngtest_read_data
static void
pngtest_read_data(png_structp png_ptr, png_bytep data, png_size_t length)
{
int check;
png_byte *n_data;
png_FILE_p io_ptr;
/* Check if data really is near. If so, use usual code. */
n_data = (png_byte *)CVT_PTR_NOCHECK(data);
io_ptr = (png_FILE_p)CVT_PTR(png_ptr->io_ptr);
if ((png_bytep)n_data == data)
{
READFILE(io_ptr, n_data, length, check);
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t read, remaining, err;
check = 0;
remaining = length;
do
{
read = MIN(NEAR_BUF_SIZE, remaining);
READFILE(io_ptr, buf, 1, err);
png_memcpy(data, buf, read); /* copy far buffer to near buffer */
if(err != read)
break;
else
check += err;
data += read;
remaining -= read;
}
while (remaining != 0);
}
if (check != length)
{
png_error(png_ptr, "read Error");
}
}
开发者ID:50p，项目名称:multitheftauto，代码行数:39，代码来源:pngtest.c
示例14: png_default_write_data
static void
png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
{
png_uint_32 check;
png_byte *near_data; /* Needs to be "png_byte *" instead of "png_bytep" */
FILE *io_ptr;
/* Check if data really is near. If so, use usual code. */
near_data = (png_byte *)CVT_PTR_NOCHECK(data);
io_ptr = (FILE *)CVT_PTR(png_ptr->io_ptr);
if ((png_bytep)near_data == data)
{
check = fwrite(near_data, 1, length, io_ptr);
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t written, remaining, err;
check = 0;
remaining = length;
do
{
written = MIN(NEAR_BUF_SIZE, remaining);
png_memcpy(buf, data, written); /* copy far buffer to near buffer */
err = fwrite(buf, 1, written, io_ptr);
if (err != written)
break;
else
check += err;
data += written;
remaining -= written;
}
while (remaining != 0);
}
if (check != length)
{
png_error(png_ptr, "Write Error");
}
}
开发者ID:axxie，项目名称:MouseImp，代码行数:39，代码来源:pngwio.c
示例15: png_default_write_data
static void
png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
{
png_uint_32 check;
png_byte *near_data;
FILE *io_ptr;
near_data = (png_byte *)CVT_PTR_NOCHECK(data);
io_ptr = (FILE *)CVT_PTR(png_ptr->io_ptr);
if ((png_bytep)near_data == data)
{
check = fwrite(near_data, 1, length, io_ptr);
}
else
{
png_byte buf[NEAR_BUF_SIZE];
png_size_t written, remaining, err;
check = 0;
remaining = length;
do
{
written = MIN(NEAR_BUF_SIZE, remaining);
png_memcpy(buf, data, written);
err = fwrite(buf, 1, written, io_ptr);
if (err != written)
break;
else
check += err;
data += written;
remaining -= written;
}
while (remaining != 0);
}
if (check != length)
{
png_error(png_ptr, "Write Error");
}
}
开发者ID:AMDmi3，项目名称:analog，代码行数:38，代码来源:pngwio.c
示例16: png_set_tRNS
void PNGAPI
png_set_tRNS(png_structp png_ptr, png_infop info_ptr,
png_bytep trans, int num_trans, png_color_16p trans_values)
{
png_debug1(1, "in %s storage function\n", "tRNS");
if (png_ptr == NULL || info_ptr == NULL)
return;
if (trans != NULL)
{
/*
* It may not actually be necessary to set png_ptr->trans here;
* we do it for backward compatibility with the way the png_handle_tRNS
* function used to do the allocation.
*/
#ifdef PNG_FREE_ME_SUPPORTED
png_free_data(png_ptr, info_ptr, PNG_FREE_TRNS, 0);
#endif
png_ptr->trans = info_ptr->trans = png_malloc(png_ptr, num_trans);
memcpy(info_ptr->trans, trans, num_trans);
#ifdef PNG_FREE_ME_SUPPORTED
info_ptr->free_me |= PNG_FREE_TRNS;
#else
png_ptr->flags |= PNG_FLAG_FREE_TRNS;
#endif
}
if (trans_values != NULL)
{
png_memcpy(&(info_ptr->trans_values), trans_values,
sizeof(png_color_16));
if (num_trans == 0)
num_trans = 1;
}
info_ptr->num_trans = (png_uint_16)num_trans;
info_ptr->valid |= PNG_INFO_tRNS;
}
开发者ID:blair，项目名称:orca，代码行数:37，代码来源:pngset.c
示例17: png_read_init_3
void PNGAPI
png_read_init_3(png_structpp ptr_ptr, png_const_charp user_png_ver,
png_size_t png_struct_size)
{
#ifdef PNG_SETJMP_SUPPORTED
jmp_buf tmp_jmp; /* to save current jump buffer */
#endif
int i=0;
png_structp png_ptr=*ptr_ptr;
if(png_ptr == NULL) return;
do
{
if(user_png_ver[i] != png_libpng_ver[i])
{
#ifdef PNG_LEGACY_SUPPORTED
png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH;
#else
png_ptr->warning_fn=NULL;
png_warning(png_ptr,
"Application uses deprecated png_read_init() and should be recompiled.");
break;
#endif
}
} while (png_libpng_ver[i++]);
png_debug(1, "in png_read_init_3\n");
#ifdef PNG_SETJMP_SUPPORTED
/* save jump buffer and error functions */
png_memcpy(tmp_jmp, png_ptr->jmpbuf, png_sizeof (jmp_buf));
#endif
if(png_sizeof(png_struct) > png_struct_size)
{
png_destroy_struct(png_ptr);
*ptr_ptr = (png_structp)png_create_struct(PNG_STRUCT_PNG);
png_ptr = *ptr_ptr;
}
/* reset all variables to 0 */
png_memset(png_ptr, 0, png_sizeof (png_struct));
#ifdef PNG_SETJMP_SUPPORTED
/* restore jump buffer */
png_memcpy(png_ptr->jmpbuf, tmp_jmp, png_sizeof (jmp_buf));
#endif
/* added at libpng-1.2.6 */
#ifdef PNG_SET_USER_LIMITS_SUPPORTED
png_ptr->user_width_max=PNG_USER_WIDTH_MAX;
png_ptr->user_height_max=PNG_USER_HEIGHT_MAX;
#endif
/* initialize zbuf - compression buffer */
png_ptr->zbuf_size = PNG_ZBUF_SIZE;
png_ptr->zbuf = (png_bytep)png_malloc(png_ptr,
(png_uint_32)png_ptr->zbuf_size);
png_ptr->zstream.zalloc = png_zalloc;
png_ptr->zstream.zfree = png_zfree;
png_ptr->zstream.opaque = (voidpf)png_ptr;
switch (inflateInit(&png_ptr->zstream))
{
case Z_OK: /* Do nothing */ break;
case Z_MEM_ERROR:
case Z_STREAM_ERROR: png_error(png_ptr, "zlib memory"); break;
case Z_VERSION_ERROR: png_error(png_ptr, "zlib version"); break;
default: png_error(png_ptr, "Unknown zlib error");
}
png_ptr->zstream.next_out = png_ptr->zbuf;
png_ptr->zstream.avail_out = (uInt)png_ptr->zbuf_size;
png_set_read_fn(png_ptr, png_voidp_NULL, png_rw_ptr_NULL);
}
开发者ID:My-Source，项目名称:root，代码行数:79，代码来源:pngread.c
示例18: png_create_read_struct_2
/* Alternate create PNG structure for reading, and allocate any memory needed. */
png_structp PNGAPI
png_create_read_struct_2(png_const_charp user_png_ver, png_voidp error_ptr,
png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr,
png_malloc_ptr malloc_fn, png_free_ptr free_fn)
{
#endif /* PNG_USER_MEM_SUPPORTED */
png_structp png_ptr;
#ifdef PNG_SETJMP_SUPPORTED
#ifdef USE_FAR_KEYWORD
jmp_buf jmpbuf;
#endif
#endif
int i;
png_debug(1, "in png_create_read_struct\n");
#ifdef PNG_USER_MEM_SUPPORTED
png_ptr = (png_structp)png_create_struct_2(PNG_STRUCT_PNG,
(png_malloc_ptr)malloc_fn, (png_voidp)mem_ptr);
#else
png_ptr = (png_structp)png_create_struct(PNG_STRUCT_PNG);
#endif
if (png_ptr == NULL)
return (NULL);
#if !defined(PNG_1_0_X)
#ifdef PNG_ASSEMBLER_CODE_SUPPORTED
png_init_mmx_flags(png_ptr); /* 1.2.0 addition */
#endif
#endif /* PNG_1_0_X */
/* added at libpng-1.2.6 */
#ifdef PNG_SET_USER_LIMITS_SUPPORTED
png_ptr->user_width_max=PNG_USER_WIDTH_MAX;
png_ptr->user_height_max=PNG_USER_HEIGHT_MAX;
#endif
#ifdef PNG_SETJMP_SUPPORTED
#ifdef USE_FAR_KEYWORD
if (setjmp(jmpbuf))
#else
if (setjmp(png_ptr->jmpbuf))
#endif
{
png_free(png_ptr, png_ptr->zbuf);
png_ptr->zbuf=NULL;
#ifdef PNG_USER_MEM_SUPPORTED
png_destroy_struct_2((png_voidp)png_ptr,
(png_free_ptr)free_fn, (png_voidp)mem_ptr);
#else
png_destroy_struct((png_voidp)png_ptr);
#endif
return (NULL);
}
#ifdef USE_FAR_KEYWORD
png_memcpy(png_ptr->jmpbuf,jmpbuf,png_sizeof(jmp_buf));
#endif
#endif
#ifdef PNG_USER_MEM_SUPPORTED
png_set_mem_fn(png_ptr, mem_ptr, malloc_fn, free_fn);
#endif
png_set_error_fn(png_ptr, error_ptr, error_fn, warn_fn);
i=0;
do
{
if(user_png_ver[i] != png_libpng_ver[i])
png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH;
} while (png_libpng_ver[i++]);
if (png_ptr->flags & PNG_FLAG_LIBRARY_MISMATCH)
{
/* Libpng 0.90 and later are binary incompatible with libpng 0.89, so
* we must recompile any applications that use any older library version.
* For versions after libpng 1.0, we will be compatible, so we need
* only check the first digit.
*/
if (user_png_ver == NULL || user_png_ver[0] != png_libpng_ver[0] ||
(user_png_ver[0] == '1' && user_png_ver[2] != png_libpng_ver[2]) ||
(user_png_ver[0] == '0' && user_png_ver[2] < '9'))
{
#if !defined(PNG_NO_STDIO) && !defined(_WIN32_WCE)
char msg[80];
if (user_png_ver)
{
sprintf(msg, "Application was compiled with png.h from libpng-%.20s",
user_png_ver);
png_warning(png_ptr, msg);
}
sprintf(msg, "Application is running with png.c from libpng-%.20s",
png_libpng_ver);
png_warning(png_ptr, msg);
#endif
#ifdef PNG_ERROR_NUMBERS_SUPPORTED
png_ptr->flags=0;
//.........这里部分代码省略.........
开发者ID:Brukwa，项目名称:VisualBoyAdvance，代码行数:101，代码来源:pngread.c
示例19: png_push_handle_unknown
/* This function is called when we haven't found a handler for this
* chunk. If there isn't a problem with the chunk itself (ie a bad chunk
* name or a critical chunk), the chunk is (currently) silently ignored.
*/
void /* PRIVATE */
png_push_handle_unknown(png_structp png_ptr, png_infop info_ptr, png_uint_32
length)
{
png_uint_32 skip = 0;
if (!(png_ptr->chunk_name[0] & 0x20))
{
#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED
if (png_handle_as_unknown(png_ptr, png_ptr->chunk_name) !=
PNG_HANDLE_CHUNK_ALWAYS
#ifdef PNG_READ_USER_CHUNKS_SUPPORTED
&& png_ptr->read_user_chunk_fn == NULL
#endif
)
#endif
png_chunk_error(png_ptr, "unknown critical chunk");
info_ptr = info_ptr; /* To quiet some compiler warnings */
}
#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED
if (png_ptr->flags & PNG_FLAG_KEEP_UNKNOWN_CHUNKS)
{
#ifdef PNG_MAX_MALLOC_64K
if (length > (png_uint_32)65535L)
{
png_warning(png_ptr, "unknown chunk too large to fit in memory");
skip = length - (png_uint_32)65535L;
length = (png_uint_32)65535L;
}
#endif
png_memcpy((png_charp)png_ptr->unknown_chunk.name,
(png_charp)png_ptr->chunk_name,
png_sizeof(png_ptr->unknown_chunk.name));
png_ptr->unknown_chunk.name[png_sizeof(png_ptr->unknown_chunk.name) - 1]
= '\0';
png_ptr->unknown_chunk.size = (png_size_t)length;
if (length == 0)
png_ptr->unknown_chunk.data = NULL;
else
{
png_ptr->unknown_chunk.data = (png_bytep)png_malloc(png_ptr,
(png_uint_32)length);
png_crc_read(png_ptr, (png_bytep)png_ptr->unknown_chunk.data, length);
}
#ifdef PNG_READ_USER_CHUNKS_SUPPORTED
if (png_ptr->read_user_chunk_fn != NULL)
{
/* Callback to user unknown chunk handler */
int ret;
ret = (*(png_ptr->read_user_chunk_fn))
(png_ptr, &png_ptr->unknown_chunk);
if (ret < 0)
png_chunk_error(png_ptr, "error in user chunk");
if (ret == 0)
{
if (!(png_ptr->chunk_name[0] & 0x20))
if (png_handle_as_unknown(png_ptr, png_ptr->chunk_name) !=
PNG_HANDLE_CHUNK_ALWAYS)
png_chunk_error(png_ptr, "unknown critical chunk");
png_set_unknown_chunks(png_ptr, info_ptr,
&png_ptr->unknown_chunk, 1);
}
}
else
#endif
png_set_unknown_chunks(png_ptr, info_ptr, &png_ptr->unknown_chunk, 1);
png_free(png_ptr, png_ptr->unknown_chunk.data);
png_ptr->unknown_chunk.data = NULL;
}
else
#endif
skip=length;
png_push_crc_skip(png_ptr, skip);
}
开发者ID:111111111，项目名称:AROMA-Installer，代码行数:88，代码来源:pngpread.c
示例20: png_set_sPLT
void PNGAPI
png_set_sPLT(png_structp png_ptr,
png_infop info_ptr, png_const_sPLT_tp entries, int nentries)
/*
* entries - array of png_sPLT_t structures
* to be added to the list of palettes
* in the info structure.
*
* nentries - number of palette structures to be
* added.
*/
{
png_sPLT_tp np;
int i;
if (png_ptr == NULL || info_ptr == NULL)
return;
if (nentries < 0 ||
nentries > INT_MAX-info_ptr->splt_palettes_num ||
(unsigned int)/*SAFE*/(nentries +/*SAFE*/
info_ptr->splt_palettes_num) >=
PNG_SIZE_MAX/png_sizeof(png_sPLT_t))
np=NULL;
else
np = (png_sPLT_tp)png_malloc_warn(png_ptr,
(info_ptr->splt_palettes_num + nentries) *
(png_size_t)png_sizeof(png_sPLT_t));
if (np == NULL)
{
png_warning(png_ptr, "No memory for sPLT palettes");
return;
}
png_memcpy(np, info_ptr->splt_palettes,
info_ptr->splt_palettes_num * png_sizeof(png_sPLT_t));
png_free(png_ptr, info_ptr->splt_palettes);
info_ptr->splt_palettes=NULL;
for (i = 0; i < nentries; i++)
{
png_sPLT_tp to = np + info_ptr->splt_palettes_num + i;
png_const_sPLT_tp from = entries + i;
png_size_t length;
length = png_strlen(from->name) + 1;
to->name = (png_charp)png_malloc_warn(png_ptr, length);
if (to->name == NULL)
{
png_warning(png_ptr,
"Out of memory while processing sPLT chunk");
continue;
}
png_memcpy(to->name, from->name, length);
to->entries = (png_sPLT_entryp)png_malloc_warn(png_ptr,
from->nentries * png_sizeof(png_sPLT_entry));
if (to->entries == NULL)
{
png_warning(png_ptr,
"Out of memory while processing sPLT chunk");
png_free(png_ptr, to->name);
to->name = NULL;
continue;
}
png_memcpy(to->entries, from->entries,
from->nentries * png_sizeof(png_sPLT_entry));
to->nentries = from->nentries;
to->depth = from->depth;
}
info_ptr->splt_palettes = np;
info_ptr->splt_palettes_num += nentries;
info_ptr->valid |= PNG_INFO_sPLT;
info_ptr->free_me |= PNG_FREE_SPLT;
}
开发者ID:robn，项目名称:pioneer-thirdparty，代码行数:84，代码来源:pngset.c
注：本文中的png_memcpy函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论