C++ pm_qos_update_request函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中pm_qos_update_request函数的典型用法代码示例。如果您正苦于以下问题：C++ pm_qos_update_request函数的具体用法？C++ pm_qos_update_request怎么用？C++ pm_qos_update_request使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了pm_qos_update_request函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: snddev_icodec_close_tx

static int snddev_icodec_close_tx(struct snddev_icodec_state *icodec)
{
	struct snddev_icodec_drv_state *drv = &snddev_icodec_drv;

	pm_qos_update_request(&drv->tx_pm_qos_req,
			      msm_cpuidle_get_deep_idle_latency());

	if (drv->snddev_vreg)
		vreg_mode_vote(drv->snddev_vreg, 0, SNDDEV_HIGH_POWER_MODE);

	/* Disable ADIE */
	if (icodec->adie_path) {
		adie_codec_proceed_stage(icodec->adie_path,
					ADIE_CODEC_DIGITAL_OFF);
		adie_codec_close(icodec->adie_path);
		icodec->adie_path = NULL;
	}

	afe_close(icodec->data->copp_id);

	clk_disable_unprepare(drv->tx_bitclk);
	clk_disable_unprepare(drv->tx_osrclk);

	msm_snddev_tx_mclk_free();

	/* Reuse pamp_off for TX platform-specific setup  */
	if (icodec->data->pamp_off)
		icodec->data->pamp_off();

	icodec->enabled = 0;

	pm_qos_update_request(&drv->tx_pm_qos_req, PM_QOS_DEFAULT_VALUE);
	return 0;
}

开发者ID:SerenityS，项目名称:android_kernel_pantech_ef39s_jb，代码行数:34，代码来源:snddev_icodec.c

示例2: sr_classp5_recal_work

/**
 * sr_classp5_recal_work() - work which actually does the recalibration
 * @work: pointer to the work
 *
 * on a periodic basis, we come and reset our calibration setup
 * so that a recalibration of the OPPs take place. This takes
 * care of aging factor in the system.
 */
static void sr_classp5_recal_work(struct work_struct *work)
{
	unsigned long delay;

	/* try lock only to avoid deadlock with suspend handler */
	if (!mutex_trylock(&omap_dvfs_lock)) {
		pr_err("%s: Can't acquire lock, delay recalibration\n",
		       __func__);
		schedule_delayed_work(&recal_work, msecs_to_jiffies
				      (SRP5_SAMPLING_DELAY_MS *
				       SRP5_STABLE_SAMPLES));
		return;
	}

	/*
	 * Deny Idle during recalibration due to the following reasons:
	 * - HW loop is enabled when we enter this function
	 * - HW loop may be triggered at any moment of time from idle
	 * - As result we may have race between SmartReflex disabling/enabling
	 * from CPU Idle and from recalibration function
	 */
	pm_qos_update_request(&recal_qos, 0);

	delay = msecs_to_jiffies(CONFIG_OMAP_SR_CLASS1_P5_RECALIBRATION_DELAY);

	if (voltdm_for_each(sr_classp5_voltdm_recal, NULL))
		pr_err("%s: Recalibration failed\n", __func__);

	/* Enable CPU Idle */
	pm_qos_update_request(&recal_qos, PM_QOS_DEFAULT_VALUE);

	next_recal_time = jiffies + delay;
	schedule_delayed_work(&recal_work, delay);
	mutex_unlock(&omap_dvfs_lock);
}

开发者ID:SciAps，项目名称:android-kernel，代码行数:43，代码来源:smartreflex-class1_p5.c

示例3: fimg2d_pm_qos_update_bus

void fimg2d_pm_qos_update_bus(struct fimg2d_control *ctrl,
				enum fimg2d_qos_status status)
{
	enum fimg2d_qos_level idx;
	int ret = 0;
	unsigned long qflags;

	g2d_spin_lock(&ctrl->qoslock, qflags);
	if ((ctrl->qos_lv >= G2D_LV0) && (ctrl->qos_lv < G2D_LV_END))
		idx = ctrl->qos_lv;
	else
		goto err;
	g2d_spin_unlock(&ctrl->qoslock, qflags);

	if (status == FIMG2D_QOS_ON) {
		if (ctrl->pre_qos_lv != ctrl->qos_lv) {
			pm_qos_update_request(&ctrl->exynos5_g2d_mif_qos,
					g2d_qos_table[idx].freq_mif);
			pm_qos_update_request(&ctrl->exynos5_g2d_int_qos,
					g2d_qos_table[idx].freq_int);
			fimg2d_debug("idx:%d, freq_mif:%d, freq_int:%d, ret:%d\n",
					idx, g2d_qos_table[idx].freq_mif,
					g2d_qos_table[idx].freq_int, ret);
		}
	} else if (status == FIMG2D_QOS_OFF) {
		pm_qos_update_request(&ctrl->exynos5_g2d_mif_qos, 0);
		pm_qos_update_request(&ctrl->exynos5_g2d_int_qos, 0);
	}

	return;
err:
	fimg2d_debug("invalid qos_lv:%d\n", ctrl->qos_lv);
}

开发者ID:ShedrockN4，项目名称:wiliteneo，代码行数:33，代码来源:fimg2d_drv.c

示例4: exynos5_busfreq_int_target

static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
			      u32 flags)
{
	int err = 0;
	struct platform_device *pdev = container_of(dev, struct platform_device,
						    dev);
	struct busfreq_data_int *data = platform_get_drvdata(pdev);
	struct opp *opp;
	unsigned long old_freq, freq;
	unsigned long volt;

	rcu_read_lock();
	opp = devfreq_recommended_opp(dev, _freq, flags);
	if (IS_ERR(opp)) {
		rcu_read_unlock();
		dev_err(dev, "%s: Invalid OPP.\n", __func__);
		return PTR_ERR(opp);
	}

	freq = opp_get_freq(opp);
	volt = opp_get_voltage(opp);
	rcu_read_unlock();

	old_freq = data->curr_freq;

	if (old_freq == freq)
		return 0;

	dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt);

	mutex_lock(&data->lock);

	if (data->disabled)
		goto out;

	if (freq > exynos5_int_opp_table[0].clk)
		pm_qos_update_request(&data->int_req, freq * 16 / 1000);
	else
		pm_qos_update_request(&data->int_req, -1);

	if (old_freq < freq)
		err = exynos5_int_setvolt(data, volt);
	if (err)
		goto out;

	err = clk_set_rate(data->int_clk, freq * 1000);

	if (err)
		goto out;

	if (old_freq > freq)
		err = exynos5_int_setvolt(data, volt);
	if (err)
		goto out;

	data->curr_freq = freq;
out:
	mutex_unlock(&data->lock);
	return err;
}

开发者ID:SeKwonLee，项目名称:Hongik_NECSST_Tizen2.2_kernel，代码行数:60，代码来源:exynos5_bus.c

示例5: usbnet_unlock_perf

static void usbnet_unlock_perf(void)
{
	pr_info("[USBNET] %s\n", __func__);

	pm_qos_update_request(&usbnet_req_freq, (s32)PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE);
	pm_qos_update_request(&usbnet_req_cpus, (s32)PM_QOS_MIN_ONLINE_CPUS_DEFAULT_VALUE);
}

开发者ID:Austs5，项目名称:enrc2b-kernel-BLADE，代码行数:7，代码来源:usbnet.c

示例6: proactive_pm_qos_command

int proactive_pm_qos_command(struct exynos_context *platform, gpu_pmqos_state state)
{
	DVFS_ASSERT(platform);

	if (!platform->devfreq_status)
		return 0;

	switch (state) {
		case GPU_CONTROL_PM_QOS_INIT:
			pm_qos_add_request(&proactive_mif_min_qos, PM_QOS_BUS_THROUGHPUT, 0);
			pm_qos_add_request(&proactive_apollo_min_qos, PM_QOS_CLUSTER0_FREQ_MIN, 0);
			pm_qos_add_request(&proactive_atlas_min_qos, PM_QOS_CLUSTER1_FREQ_MIN, 0);
			if (!platform->pmqos_int_disable)
				pm_qos_add_request(&proactive_int_min_qos, PM_QOS_DEVICE_THROUGHPUT, 0);
			break;
		case GPU_CONTROL_PM_QOS_DEINIT:
			pm_qos_remove_request(&proactive_mif_min_qos);
			pm_qos_remove_request(&proactive_apollo_min_qos);
			pm_qos_remove_request(&proactive_atlas_min_qos);
			if (!platform->pmqos_int_disable)
				pm_qos_remove_request(&proactive_int_min_qos);
			break;
		case GPU_CONTROL_PM_QOS_RESET:
			pm_qos_update_request(&proactive_mif_min_qos, 0);
			pm_qos_update_request(&proactive_apollo_min_qos, 0);
			pm_qos_update_request(&proactive_atlas_min_qos, 0);
		default:
			break;
	}

	return 0;
}

开发者ID:HRTKernel，项目名称:Hacker_Kernel_SM-G92X_MM_Beta，代码行数:32，代码来源:gpu_pmqos.c

示例7: esa_update_qos

static void esa_update_qos(void)
{
#ifdef CONFIG_PM_DEVFREQ
	int mif_qos_new;
#ifdef CONFIG_SND_ESA_SA_EFFECT
	int int_qos_new = 0;
#endif
	if (!si.fw_ready)
		mif_qos_new = 0;
	else if (esa_check_ip_exist(ADEC_AAC))
		mif_qos_new = CA5_MIF_FREQ_HIGH;
	else
		mif_qos_new = CA5_MIF_FREQ_NORM;

#ifdef CONFIG_SND_ESA_SA_EFFECT
	if (si.effect_on) {
		mif_qos_new = CA5_MIF_FREQ_BOOST;
		int_qos_new = CA5_INT_FREQ_BOOST;
	}

	if (si.int_qos != int_qos_new) {
		si.int_qos = int_qos_new;
		pm_qos_update_request(&si.ca5_int_qos, si.int_qos);
		pr_debug("%s: int_qos = %d\n", __func__, si.int_qos);
	}
#endif
	if (si.mif_qos != mif_qos_new) {
		si.mif_qos = mif_qos_new;
		pm_qos_update_request(&si.ca5_mif_qos, si.mif_qos);
		pr_debug("%s: mif_qos = %d\n", __func__, si.mif_qos);
	}
#endif
}

开发者ID:MikeForeskin，项目名称:Vindicator-S6，代码行数:33，代码来源:seiren.c

示例8: cfb_boost

static void cfb_boost(struct work_struct *w)
{
    cancel_delayed_work_sync(&unboost);
    pm_qos_update_request(&core_req, 1);
    pm_qos_update_request(&freq_req, boost_freq);
    queue_delayed_work(cfb_wq, &unboost, msecs_to_jiffies(boost_time));
}

开发者ID:Ntemis，项目名称:LG_X3_P880_v20a，代码行数:7，代码来源:input-cfboost.c

示例9: fimg2d_open

static int fimg2d_open(struct inode *inode, struct file *file)
{
	struct fimg2d_context *ctx;
	unsigned long flags, count;

	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
	if (!ctx) {
		fimg2d_err("not enough memory for ctx\n");
		return -ENOMEM;
	}
	file->private_data = (void *)ctx;

	g2d_spin_lock(&ctrl->bltlock, flags);
	fimg2d_add_context(ctrl, ctx);
	count = atomic_read(&ctrl->nctx);
	g2d_spin_unlock(&ctrl->bltlock, flags);

#ifdef CONFIG_ARM_EXYNOS_IKS_CPUFREQ
	if (count == 1) {
		/* mif lock : 800MHz */
		pm_qos_update_request(&exynos5_g2d_mif_qos, 800000);
		pm_qos_update_request(&exynos5_g2d_cpu_qos, 400000);
	} else
		fimg2d_debug("count:%ld, pm_qos_update_request() is already called\n", count);
#endif
	return 0;
}

开发者ID:cyaniris，项目名称:sgs4duos_kernel，代码行数:27，代码来源:fimg2d_drv.c

示例10: fimg2d_release

static int fimg2d_release(struct inode *inode, struct file *file)
{
	struct fimg2d_context *ctx = file->private_data;
	int retry = POLL_RETRY;
	unsigned long flags, count;

	fimg2d_debug("ctx %p\n", ctx);
	while (retry--) {
		if (!atomic_read(&ctx->ncmd))
			break;
		mdelay(POLL_TIMEOUT);
	}

	g2d_spin_lock(&ctrl->bltlock, flags);
	fimg2d_del_context(ctrl, ctx);
	count = atomic_read(&ctrl->nctx);
	g2d_spin_unlock(&ctrl->bltlock, flags);

#ifdef CONFIG_ARM_EXYNOS_IKS_CPUFREQ
	if (!count) {
		pm_qos_update_request(&exynos5_g2d_mif_qos, 0);
		pm_qos_update_request(&exynos5_g2d_cpu_qos, 0);
	} else
		fimg2d_debug("count:%ld, pm_qos_update_request() is already called\n", count);
#endif
	kfree(ctx);
	return 0;
}

开发者ID:cyaniris，项目名称:sgs4duos_kernel，代码行数:28，代码来源:fimg2d_drv.c

示例11: tegra_camera_power_off

static int tegra_camera_power_off(struct tegra_camera_dev *dev)
{
	int ret = 0;
	int val = 0;

	dev_dbg(dev->dev, "%s++\n", __func__);

	/* Disable external power */
	if (dev->reg) {
		ret = regulator_disable(dev->reg);
		if (ret) {
			dev_err(dev->dev,
				"%s: disable csi regulator failed.\n",
				__func__);
			return ret;
		}
	}
	dev->power_on = 0;
	tegra_camera_on = dev->power_on;

	val = PAD_CIL_PDVREG(0x0);
	tegra_vi_csi_writel(val, CSI_CIL_PAD_CONFIG);

	if (camera_boost){
		pr_info("%s: clean camera freq boost\n", __func__);
		pm_qos_update_request(&boost_cpu_freq_req, (s32)PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE);
		pm_qos_update_request(&boost_cpu_num_req, (s32)PM_QOS_MIN_ONLINE_CPUS_DEFAULT_VALUE);
	}
	
	return ret;
}

开发者ID:Austs5，项目名称:enrc2b-kernel-BLADE，代码行数:31，代码来源:tegra_camera.c

示例12: tegra_camera_power_on

static int tegra_camera_power_on(struct tegra_camera_dev *dev)
{
	int ret = 0;

	dev_dbg(dev->dev, "%s++\n", __func__);

	/* Enable external power */
	if (dev->reg) {
		ret = regulator_enable(dev->reg);
		if (ret) {
			dev_err(dev->dev,
				"%s: enable csi regulator failed.\n",
				__func__);
			return ret;
		}
	}

	dev->power_on = 1;
	tegra_camera_on = dev->power_on;

	if (camera_boost){
		pr_info("%s: set camera boost freq = %d cpus = %d\n", __func__, camera_boost_freq, camera_boost_cpus);
		pm_qos_update_request(&boost_cpu_freq_req, (s32)camera_boost_freq);
		pm_qos_update_request(&boost_cpu_num_req, (s32)camera_boost_cpus);
	}
	
	return ret;
}

开发者ID:Austs5，项目名称:enrc2b-kernel-BLADE，代码行数:28，代码来源:tegra_camera.c

示例13: omap_mbox_startup

static int omap_mbox_startup(struct omap_mbox *mbox)
{
	int ret = 0;
	struct omap_mbox_queue *mq;

	mutex_lock(&mbox_configured_lock);
	if (!mbox_configured++) {
		pm_qos_update_request(&mbox_qos_request,
					SET_MPU_CORE_CONSTRAINT);
		if (likely(mbox->ops->startup)) {
			ret = mbox->ops->startup(mbox);
			if (unlikely(ret))
				goto fail_startup;
		} else
			goto fail_startup;
	}

	if (!mbox->use_count++) {
		mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
		if (!mq) {
			ret = -ENOMEM;
			goto fail_alloc_txq;
		}
		mbox->txq = mq;

		mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
		if (!mq) {
			ret = -ENOMEM;
			goto fail_alloc_rxq;
		}
		mbox->rxq = mq;
		mq->mbox = mbox;
		ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
							mbox->name, mbox);
		if (unlikely(ret)) {
			pr_err("failed to register mailbox interrupt:%d\n",
									ret);
			goto fail_request_irq;
		}
	}
	mutex_unlock(&mbox_configured_lock);
	return 0;

fail_request_irq:
	mbox_queue_free(mbox->rxq);
fail_alloc_rxq:
	mbox_queue_free(mbox->txq);
fail_alloc_txq:
	if (mbox->ops->shutdown)
		mbox->ops->shutdown(mbox);
	mbox->use_count--;
fail_startup:
	if (!--mbox_configured)
		pm_qos_update_request(&mbox_qos_request,
					 CLEAR_MPU_CORE_CONSTRAINT);
	mutex_unlock(&mbox_configured_lock);
	return ret;
}

开发者ID:markhayes0338，项目名称:android-tuna，代码行数:58，代码来源:mailbox.c

示例14: bluetooth_pm_sleep

void bluetooth_pm_sleep(void)
{
	unsigned long irq_flags;

	//printk("+++ %s\n", __func__);

	spin_lock_irqsave(&rw_lock, irq_flags);

	/* already asleep, this is an error case */
	if (test_bit(BT_ASLEEP, &flags)) {
		spin_unlock_irqrestore(&rw_lock, irq_flags);
		printk("--- %s, already asleep return\n", __func__);
		return;
	}

//BT_S : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT
	uart_off_jiffies = jiffies;

	if(check_uart_control_available(uart_on_jiffies, uart_off_jiffies) == false)
	{
		mod_timer(&uart_control_timer, jiffies + msecs_to_jiffies(UART_CONTROL_BLOCK_TIME));
		spin_unlock_irqrestore(&rw_lock, irq_flags);
		printk("--- %s - UART control unavailable Return\n", __func__);
		return;
	}
//BT_E : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT

	set_bit(BT_ASLEEP, &flags);

	spin_unlock_irqrestore(&rw_lock, irq_flags);

	printk("%s, going to sleep...\n", __func__);

	//printk("%s, WAKE_UNLOCK_START\n", __func__);

	wake_unlock(&bsi->wake_lock);

	//printk("%s, WAKE_UNLOCK_END\n", __func__);

#ifdef UART_CONTROL_MSM
	/*Deactivating UART */
	hsuart_power(0);
#endif /*UART_CONTROL_MSM*/

#ifdef QOS_REQUEST_MSM
	if(bsi->dma_qos_request == REQUESTED) {
		pm_qos_update_request(&bsi->dma_qos, 0x7FFFFFF);
	}
#endif /* QOS_REQUEST_MSM */

#ifdef QOS_REQUEST_TEGRA
	pm_qos_update_request(&bsi->resume_cpu_freq_req,
				PM_QOS_DEFAULT_VALUE);
#endif/*QOS_REQUEST_TEGRA*/

	//printk("--- %s\n", __func__);
}

开发者ID:bju2000，项目名称:kernel_lge_msm8994，代码行数:57，代码来源:bluetooth-pm.c

示例15: secos_booster_start

int secos_booster_start(enum secos_boost_policy policy)
{
	int ret = 0;
	int freq;

	current_core = mc_active_core();

	/* migrate to big Core */
	if ((policy != MAX_PERFORMANCE) && (policy != MID_PERFORMANCE)
			&& (policy != MIN_PERFORMANCE)) {
		pr_err("%s: wrong secos boost policy:%d\n", __func__, policy);
		ret = -EINVAL;
		goto error;
	}

	/* cpufreq configuration */
	if (policy == MAX_PERFORMANCE)
		freq = max_cpu_freq;
	else if (policy == MID_PERFORMANCE)
		freq = MID_CPUFREQ;
	else
		freq = 0;
	pm_qos_update_request(&secos_booster_qos, freq); /* KHz */

	if (!cpu_online(DEFAULT_BIG_CORE)) {
		pr_debug("%s: %d core is offline\n", __func__, DEFAULT_BIG_CORE);
		udelay(100);
		if (!cpu_online(DEFAULT_BIG_CORE)) {
			pr_debug("%s: %d core is offline\n", __func__, DEFAULT_BIG_CORE);
			pm_qos_update_request(&secos_booster_qos, 0);
			ret = -EPERM;
			goto error;
		}
		pr_debug("%s: %d core is online\n", __func__, DEFAULT_BIG_CORE);
	}
	ret = mc_switch_core(DEFAULT_BIG_CORE);
	if (ret) {
		pr_err("%s: mc switch failed : err:%d\n", __func__, ret);
		pm_qos_update_request(&secos_booster_qos, 0);
		goto error;
	}

	/* Change schedule policy */
	mc_set_schedule_policy(DEFAULT_BIG_CORE);

	/* Restore origin performance policy after default boost time */
	hrtimer_cancel(&timer);
	hrtimer_start(&timer, ns_to_ktime((u64)DEFAULT_SECOS_BOOST_TIME * NSEC_PER_MSEC),
			HRTIMER_MODE_REL);

error:
	return ret;
}

开发者ID:TheTypoMaster，项目名称:android_kernel_samsung_exynos5433，代码行数:53，代码来源:sec_os_booster.c

示例16: fimg2d_pm_qos_update_cpu

void fimg2d_pm_qos_update_cpu(struct fimg2d_control *ctrl,
				enum fimg2d_qos_status status)
{
	enum fimg2d_qos_level idx;
	unsigned long qflags;

	g2d_spin_lock(&ctrl->qoslock, qflags);
	if ((ctrl->qos_lv >= G2D_LV0) && (ctrl->qos_lv < G2D_LV_END))
		idx = ctrl->qos_lv;
	else
		goto err;
	g2d_spin_unlock(&ctrl->qoslock, qflags);

	if (status == FIMG2D_QOS_ON) {
		if (ctrl->pre_qos_lv != ctrl->qos_lv) {
#ifdef CONFIG_SCHED_HMP
			g2d_spin_lock(&ctrl->qoslock, qflags);
			if (idx == 0 && !ctrl->boost) {
				set_hmp_boost(true);
				ctrl->boost = true;
				fimg2d_debug("turn on hmp booster\n");
			}
			g2d_spin_unlock(&ctrl->qoslock, qflags);
#endif

			pm_qos_update_request(&ctrl->exynos5_g2d_cluster1_qos,
					g2d_qos_table[idx].freq_cpu);
			pm_qos_update_request(&ctrl->exynos5_g2d_cluster0_qos,
					g2d_qos_table[idx].freq_kfc);
			fimg2d_debug("idx:%d, freq_cpu:%d, freq_kfc:%d\n",
					idx, g2d_qos_table[idx].freq_cpu,
					g2d_qos_table[idx].freq_kfc);
		}
	} else if (status == FIMG2D_QOS_OFF) {
		pm_qos_update_request(&ctrl->exynos5_g2d_cluster1_qos, 0);
		pm_qos_update_request(&ctrl->exynos5_g2d_cluster0_qos, 0);

#ifdef CONFIG_SCHED_HMP
		g2d_spin_lock(&ctrl->qoslock, qflags);
		if (ctrl->boost) {
			set_hmp_boost(false);
			ctrl->boost = false;
			fimg2d_debug("turn off hmp booster\n");
		}
		g2d_spin_unlock(&ctrl->qoslock, qflags);
#endif
	}

	return;
err:
	fimg2d_debug("invalid qos_lv:%d\n", ctrl->qos_lv);
}

开发者ID:ShedrockN4，项目名称:wiliteneo，代码行数:52，代码来源:fimg2d_drv.c

示例17: usbnet_unlock_perf

static void usbnet_unlock_perf(void)
{
	pr_info("[USBNET] %s\n", __func__);

#ifdef CONFIG_PERFLOCK
	if (is_perf_lock_active(&usbnet_perf_lock))
		perf_unlock(&usbnet_perf_lock);
#endif
	pm_qos_update_request(&usbnet_req_freq, (s32)PM_QOS_CPU_FREQ_MIN_DEFAULT_VALUE);
	pm_qos_update_request(&usbnet_req_cpus, (s32)PM_QOS_MIN_ONLINE_CPUS_DEFAULT_VALUE);

	is_usbnet_perf_locked = 0;
}

开发者ID:HuChundong，项目名称:Endeavor3.1.10，代码行数:13，代码来源:usbnet.c

示例18: gpu_pm_qos_command

static int gpu_pm_qos_command(struct exynos_context *platform, gpu_pmqos_state state)
{
#ifdef CONFIG_BUS_DEVFREQ
	switch (state) {
	case GPU_CONTROL_PM_QOS_INIT:
		pm_qos_add_request(&exynos5_g3d_mif_qos, PM_QOS_BUS_THROUGHPUT, 0);
		pm_qos_add_request(&exynos5_g3d_int_qos, PM_QOS_DEVICE_THROUGHPUT, 0);
		pm_qos_add_request(&exynos5_g3d_cpu_kfc_min_qos, PM_QOS_KFC_FREQ_MIN, 0);
		pm_qos_add_request(&exynos5_g3d_cpu_egl_max_qos, PM_QOS_CPU_FREQ_MAX, PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE);
#if SLSI_INTEGRATION
#if defined(SET_MINLOCK)
		pm_qos_add_request(&exynos5_g3d_cpu_egl_min_qos, PM_QOS_CPU_FREQ_MIN, 0);

		platform->custom_cpu_max_lock = 0;
#endif
#endif
		break;
	case GPU_CONTROL_PM_QOS_DEINIT:
		pm_qos_remove_request(&exynos5_g3d_mif_qos);
		pm_qos_remove_request(&exynos5_g3d_int_qos);
		pm_qos_remove_request(&exynos5_g3d_cpu_kfc_min_qos);
		pm_qos_remove_request(&exynos5_g3d_cpu_egl_max_qos);
#if SLSI_INTEGRATION
#if defined(SET_MINLOCK)
		pm_qos_remove_request(&exynos5_g3d_cpu_egl_min_qos);
#endif
#endif
		break;
	case GPU_CONTROL_PM_QOS_SET:
		if (platform->step < 0)
			return -1;
		pm_qos_update_request(&exynos5_g3d_mif_qos, platform->table[platform->step].mem_freq);
		pm_qos_update_request(&exynos5_g3d_int_qos, platform->table[platform->step].int_freq);
		pm_qos_update_request(&exynos5_g3d_cpu_kfc_min_qos, platform->table[platform->step].cpu_freq);

#if SLSI_INTEGRATION
#if defined(SET_MINLOCK)
		if (platform->custom_cpu_max_lock)
			pm_qos_update_request(&exynos5_g3d_cpu_egl_max_qos, platform->custom_cpu_max_lock);
		else
#endif
#endif
			pm_qos_update_request(&exynos5_g3d_cpu_egl_max_qos, platform->table[platform->step].cpu_max_freq);

		break;
	case GPU_CONTROL_PM_QOS_RESET:
		pm_qos_update_request(&exynos5_g3d_mif_qos, 0);
		pm_qos_update_request(&exynos5_g3d_int_qos, 0);
		pm_qos_update_request(&exynos5_g3d_cpu_kfc_min_qos, 0);
		pm_qos_update_request(&exynos5_g3d_cpu_egl_max_qos, PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE);
	default:
		break;
	}
#endif /* CONFIG_BUS_DEVFREQ */
	return 0;
}

开发者ID:djmax81，项目名称:android_kernel_samsung_exynos5433_LL，代码行数:56，代码来源:gpu_control.c

示例19: pxav3_access_constrain

static void pxav3_access_constrain(struct sdhci_host *host, unsigned int ac)
{
        struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
        struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;

        if (!pdata)
                return;
        if (ac)
		pm_qos_update_request(&pdata->qos_idle,
				PM_QOS_CPUIDLE_BLOCK_AXI_VALUE);
        else
		pm_qos_update_request(&pdata->qos_idle,
				PM_QOS_CPUIDLE_BLOCK_DEFAULT_VALUE);
}

开发者ID:TeamRegular，项目名称:android_kernel_samsung_lt02-common，代码行数:14，代码来源:sdhci-pxav3.c

示例20: sec_gpu_pwr_clk_state_set

/* gpu gpu setmode clock and power*/
int sec_gpu_pwr_clk_state_set(sec_gpu_state state)
{
	int err = 0;
	mutex_lock(&lock);
	switch (state) {
	case GPU_PWR_CLK_STATE_ON:
	{
#if defined(CONFIG_ARM_EXYNOS5410_BUS_DEVFREQ)
		pm_qos_update_request(&exynos5_g3d_int_qos, 200000);
		if (sec_gpu_setting_clock < MIF_THRESHHOLD_VALUE_CLK)
			pm_qos_update_request(&exynos5_g3d_mif_qos, 267000);
		else
			pm_qos_update_request(&exynos5_g3d_mif_qos, 800000);

		if (sec_gpu_setting_clock >= sec_gpu_top_clock) {
#ifdef CONFIG_ARM_EXYNOS_IKS_CPUFREQ
			pm_qos_update_request(&exynos5_g3d_cpu_qos, 600000);
#else
			pm_qos_update_request(&exynos5_g3d_cpu_qos, 800000);
#endif
		}
#endif
		err = gpu_power_enable();
		if (err) {
			mutex_unlock(&lock);
			return err;
		}
		err = sec_gpu_clock_enable();
		if (err) {
			mutex_unlock(&lock);
			return err;
		}
		sec_gpu_power_on = true;
	}
	break;
	case GPU_PWR_CLK_STATE_OFF:
	{
		sec_gpu_power_on = false;
		sec_gpu_clock_disable();
		err = gpu_power_disable();
		if (err) {
			mutex_unlock(&lock);
			return err;
		}
#if defined(CONFIG_ARM_EXYNOS5410_BUS_DEVFREQ)
		pm_qos_update_request(&exynos5_g3d_cpu_qos, 0);
		pm_qos_update_request(&exynos5_g3d_int_qos, 0);
		pm_qos_update_request(&exynos5_g3d_mif_qos, 0);
#endif
	}
	break;
	default:
		PVR_DPF((PVR_DBG_ERROR, "Error setting sec_gpu_state_set: %d", state));
	break;
	}

	mutex_unlock(&lock);
	return err;
}

开发者ID:Tambralinga，项目名称:odroidNetworking，代码行数:60，代码来源:sec_control_pwr_clk.c

注：本文中的pm_qos_update_request函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ pm_relax函数代码示例发布时间：2022-05-30

C++ pm_qos_request函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19214|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9663|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8661|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ pm_qos_update_request函数代码示例

示例1: snddev_icodec_close_tx

示例2: sr_classp5_recal_work

示例3: fimg2d_pm_qos_update_bus

示例4: exynos5_busfreq_int_target

示例5: usbnet_unlock_perf

示例6: proactive_pm_qos_command

示例7: esa_update_qos

示例8: cfb_boost

示例9: fimg2d_open

示例10: fimg2d_release

示例11: tegra_camera_power_off

示例12: tegra_camera_power_on

示例13: omap_mbox_startup

示例14: bluetooth_pm_sleep

示例15: secos_booster_start

示例16: fimg2d_pm_qos_update_cpu

示例17: usbnet_unlock_perf

示例18: gpu_pm_qos_command

示例19: pxav3_access_constrain

示例20: sec_gpu_pwr_clk_state_set

请发表评论

全部评论

上一篇：

下一篇：

PacktPublishing/Python-Machine-Learning-

sussillo/hfopt-matlab: A parallel, cpu-b

鲁东大学一米网:Win7系统USB驱动器RAM的操

ant-design/ant-design: An enterprise-cla

emersion/go-ostatus: An OStatus library

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053