• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ pm_qos_remove_request函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pm_qos_remove_request函数的典型用法代码示例。如果您正苦于以下问题：C++ pm_qos_remove_request函数的具体用法？C++ pm_qos_remove_request怎么用？C++ pm_qos_remove_request使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pm_qos_remove_request函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: k3v2_release_freq_lock_work

/*****************************************************************************
Description    : 1s frequency control release timer timeout, this function will be triggered. It will
                       release the minimal CPU and DDR frequency lock.	This function run in the frequency 
                       control work quenue.
Prototype      : void k3v2_release_freq_lock_work(struct work_struct *work)
Input  Param   :
Output  Param  :
Return  Value  :
******************************************************************************/
static void k3v2_release_freq_lock_work(struct work_struct *work)
{
    freq_lock_control_t *fl_control_ptr =
        container_of(work, freq_lock_control_t, release_lock_work);
    lfprintf("k3v2_release_freq_lock_work call enter.\n");
#ifdef DEBUG_WIFI_FREQ_LOCK
    pre_release_jiffies = jiffies;
#endif
    if(NULL == fl_control_ptr){
        printk("k3v2_release_freq_lock_work  NULL point error!\n");     
        return;
    }

    mutex_lock(&fl_control_ptr->lock_freq_mtx);
    if(LR_SHOULD_DROP_MAGIC == fl_control_ptr->release_work_state ){
        lfprintf("k3v2_release_freq_lock_work work has been drop, not do lock release, return here.\n");
        fl_control_ptr->release_work_state = LR_DISABLE_MAGIC;
        return;
    }
    
    if(FREQ_LOCK_ENABLE == fl_control_ptr->lock_mod){
#ifdef CONFIG_CPU_FREQ_GOV_K3HOTPLUG        
        /*lock freq timer timeout, do frequency lock release process here.*/
        pm_qos_remove_request(&fl_control_ptr->cpu_qos_request);
        if(fl_control_ptr->lock_level >= START_DDR_FREQ_LOCK_LEVEL){
            pm_qos_remove_request(&fl_control_ptr->ddr_qos_request);
        }
#endif
        fl_control_ptr->release_work_state = LR_DISABLE_MAGIC;
        fl_control_ptr->lock_mod = FREQ_LOCK_DISABLE;
    }
    mutex_unlock(&fl_control_ptr->lock_freq_mtx);
    
}
开发者ID:Jimbo77，项目名称:Sneaky_Kernel，代码行数:43，代码来源:k3v2_freq_ctl.c


示例2: gpu_pm_qos_command

static int gpu_pm_qos_command(struct exynos_context *platform, gpu_pmqos_state state)
{
#ifdef CONFIG_BUS_DEVFREQ
	switch (state) {
	case GPU_CONTROL_PM_QOS_INIT:
		pm_qos_add_request(&exynos5_g3d_mif_qos, PM_QOS_BUS_THROUGHPUT, 0);
		pm_qos_add_request(&exynos5_g3d_int_qos, PM_QOS_DEVICE_THROUGHPUT, 0);
		pm_qos_add_request(&exynos5_g3d_cpu_qos, PM_QOS_KFC_FREQ_MIN, 0);
		break;
	case GPU_CONTROL_PM_QOS_DEINIT:
		pm_qos_remove_request(&exynos5_g3d_mif_qos);
		pm_qos_remove_request(&exynos5_g3d_int_qos);
		pm_qos_remove_request(&exynos5_g3d_cpu_qos);
		break;
	case GPU_CONTROL_PM_QOS_SET:
		if (platform->step < 0)
			return -1;
		pm_qos_update_request(&exynos5_g3d_mif_qos, platform->table[platform->step].mem_freq);
		pm_qos_update_request(&exynos5_g3d_int_qos, platform->table[platform->step].int_freq);
		pm_qos_update_request(&exynos5_g3d_cpu_qos, platform->table[platform->step].cpu_freq);
		break;
	case GPU_CONTROL_PM_QOS_RESET:
		pm_qos_update_request(&exynos5_g3d_mif_qos, 0);
		pm_qos_update_request(&exynos5_g3d_int_qos, 0);
		pm_qos_update_request(&exynos5_g3d_cpu_qos, 0);
	default:
		break;
	}
#endif /* CONFIG_BUS_DEVFREQ */
	return 0;
}
开发者ID:cm-3470，项目名称:android_kernel_samsung_degaslte，代码行数:31，代码来源:gpu_control.c


示例3: fimg2d_remove

static int fimg2d_remove(struct platform_device *pdev)
{

#ifdef CONFIG_ARM_EXYNOS_IKS_CPUFREQ
	pm_qos_remove_request(&exynos5_g2d_cpu_qos);
	pm_qos_remove_request(&exynos5_g2d_mif_qos);
#endif

	misc_deregister(&fimg2d_dev);

#ifdef CONFIG_PM_RUNTIME
	pm_runtime_disable(&pdev->dev);
#else
	fimg2d_clk_off(ctrl);
#endif
	fimg2d_clk_release(ctrl);
	free_irq(ctrl->irq, NULL);

	if (ctrl->mem) {
		iounmap(ctrl->regs);
		release_resource(ctrl->mem);
		kfree(ctrl->mem);
	}

#ifdef BLIT_WORKQUE
	destroy_workqueue(ctrl->work_q);
#endif
	mutex_destroy(&ctrl->drvlock);
	kfree(ctrl);
	return 0;
}
开发者ID:cyaniris，项目名称:sgs4duos_kernel，代码行数:31，代码来源:fimg2d_drv.c


示例4: tegra_auto_hotplug_debug_init

static int __init tegra_auto_hotplug_debug_init(void)
{
    if (!tegra3_cpu_lock)
        return -ENOENT;

    hp_debugfs_root = debugfs_create_dir("tegra_hotplug", NULL);
    if (!hp_debugfs_root)
        return -ENOMEM;

    pm_qos_add_request(&min_cpu_req, PM_QOS_MIN_ONLINE_CPUS,
                       PM_QOS_DEFAULT_VALUE);
    pm_qos_add_request(&max_cpu_req, PM_QOS_MAX_ONLINE_CPUS,
                       PM_QOS_DEFAULT_VALUE);

    if (!debugfs_create_file(
                "min_cpus", S_IRUGO, hp_debugfs_root, NULL, &min_cpus_fops))
        goto err_out;

    if (!debugfs_create_file(
                "max_cpus", S_IRUGO, hp_debugfs_root, NULL, &max_cpus_fops))
        goto err_out;

    if (!debugfs_create_file(
                "stats", S_IRUGO, hp_debugfs_root, NULL, &hp_stats_fops))
        goto err_out;

    return 0;

err_out:
    debugfs_remove_recursive(hp_debugfs_root);
    pm_qos_remove_request(&min_cpu_req);
    pm_qos_remove_request(&max_cpu_req);
    return -ENOMEM;
}
开发者ID:AndroidDeveloperAlliance，项目名称:ZenKernel_Grouper，代码行数:34，代码来源:cpu-tegra3.c


示例5: fimg2d_pm_qos_remove

void fimg2d_pm_qos_remove(struct fimg2d_control *ctrl)
{
#if defined(CONFIG_ARM_EXYNOS_IKS_CPUFREQ) || \
	defined(CONFIG_ARM_EXYNOS_MP_CPUFREQ) || \
	defined(CONFIG_FIMG2D_USE_BUS_DEVFREQ)
	struct fimg2d_platdata *pdata;

#ifdef CONFIG_OF
	pdata = ctrl->pdata;
#else
	pdata = to_fimg2d_plat(ctrl->dev);
#endif
#endif

#if defined(CONFIG_ARM_EXYNOS_IKS_CPUFREQ) || \
	defined(CONFIG_ARM_EXYNOS_MP_CPUFREQ)
	if (pdata->cpu_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_cpu_qos);
	if (pdata->kfc_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_kfc_qos);
#endif

#ifdef CONFIG_FIMG2D_USE_BUS_DEVFREQ
	if (pdata->mif_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_mif_qos);
	if (pdata->int_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_int_qos);
#endif
}
开发者ID:4pao，项目名称:android_kernel_hardkernel_odroidxu3，代码行数:29，代码来源:fimg2d_drv.c


示例6: proactive_pm_qos_command

int proactive_pm_qos_command(struct exynos_context *platform, gpu_pmqos_state state)
{
	DVFS_ASSERT(platform);

	if (!platform->devfreq_status)
		return 0;

	switch (state) {
		case GPU_CONTROL_PM_QOS_INIT:
			pm_qos_add_request(&proactive_mif_min_qos, PM_QOS_BUS_THROUGHPUT, 0);
			pm_qos_add_request(&proactive_apollo_min_qos, PM_QOS_CLUSTER0_FREQ_MIN, 0);
			pm_qos_add_request(&proactive_atlas_min_qos, PM_QOS_CLUSTER1_FREQ_MIN, 0);
			if (!platform->pmqos_int_disable)
				pm_qos_add_request(&proactive_int_min_qos, PM_QOS_DEVICE_THROUGHPUT, 0);
			break;
		case GPU_CONTROL_PM_QOS_DEINIT:
			pm_qos_remove_request(&proactive_mif_min_qos);
			pm_qos_remove_request(&proactive_apollo_min_qos);
			pm_qos_remove_request(&proactive_atlas_min_qos);
			if (!platform->pmqos_int_disable)
				pm_qos_remove_request(&proactive_int_min_qos);
			break;
		case GPU_CONTROL_PM_QOS_RESET:
			pm_qos_update_request(&proactive_mif_min_qos, 0);
			pm_qos_update_request(&proactive_apollo_min_qos, 0);
			pm_qos_update_request(&proactive_atlas_min_qos, 0);
		default:
			break;
	}

	return 0;
}
开发者ID:HRTKernel，项目名称:Hacker_Kernel_SM-G92X_MM_Beta，代码行数:32，代码来源:gpu_pmqos.c


示例7: tegra_auto_hotplug_exit

void tegra_auto_hotplug_exit(void)
{
    destroy_workqueue(hotplug_wq);
#ifdef CONFIG_DEBUG_FS
    debugfs_remove_recursive(hp_debugfs_root);
    pm_qos_remove_request(&min_cpu_req);
    pm_qos_remove_request(&max_cpu_req);
#endif
}
开发者ID:AndroidDeveloperAlliance，项目名称:ZenKernel_Grouper，代码行数:9，代码来源:cpu-tegra3.c


示例8: gpu_pm_qos_command

static int gpu_pm_qos_command(struct exynos_context *platform, gpu_pmqos_state state)
{
#ifdef CONFIG_BUS_DEVFREQ
	switch (state) {
	case GPU_CONTROL_PM_QOS_INIT:
		pm_qos_add_request(&exynos5_g3d_mif_qos, PM_QOS_BUS_THROUGHPUT, 0);
		pm_qos_add_request(&exynos5_g3d_int_qos, PM_QOS_DEVICE_THROUGHPUT, 0);
		pm_qos_add_request(&exynos5_g3d_cpu_kfc_min_qos, PM_QOS_KFC_FREQ_MIN, 0);
		pm_qos_add_request(&exynos5_g3d_cpu_egl_max_qos, PM_QOS_CPU_FREQ_MAX, PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE);
#if SLSI_INTEGRATION
#if defined(SET_MINLOCK)
		pm_qos_add_request(&exynos5_g3d_cpu_egl_min_qos, PM_QOS_CPU_FREQ_MIN, 0);

		platform->custom_cpu_max_lock = 0;
#endif
#endif
		break;
	case GPU_CONTROL_PM_QOS_DEINIT:
		pm_qos_remove_request(&exynos5_g3d_mif_qos);
		pm_qos_remove_request(&exynos5_g3d_int_qos);
		pm_qos_remove_request(&exynos5_g3d_cpu_kfc_min_qos);
		pm_qos_remove_request(&exynos5_g3d_cpu_egl_max_qos);
#if SLSI_INTEGRATION
#if defined(SET_MINLOCK)
		pm_qos_remove_request(&exynos5_g3d_cpu_egl_min_qos);
#endif
#endif
		break;
	case GPU_CONTROL_PM_QOS_SET:
		if (platform->step < 0)
			return -1;
		pm_qos_update_request(&exynos5_g3d_mif_qos, platform->table[platform->step].mem_freq);
		pm_qos_update_request(&exynos5_g3d_int_qos, platform->table[platform->step].int_freq);
		pm_qos_update_request(&exynos5_g3d_cpu_kfc_min_qos, platform->table[platform->step].cpu_freq);

#if SLSI_INTEGRATION
#if defined(SET_MINLOCK)
		if (platform->custom_cpu_max_lock)
			pm_qos_update_request(&exynos5_g3d_cpu_egl_max_qos, platform->custom_cpu_max_lock);
		else
#endif
#endif
			pm_qos_update_request(&exynos5_g3d_cpu_egl_max_qos, platform->table[platform->step].cpu_max_freq);

		break;
	case GPU_CONTROL_PM_QOS_RESET:
		pm_qos_update_request(&exynos5_g3d_mif_qos, 0);
		pm_qos_update_request(&exynos5_g3d_int_qos, 0);
		pm_qos_update_request(&exynos5_g3d_cpu_kfc_min_qos, 0);
		pm_qos_update_request(&exynos5_g3d_cpu_egl_max_qos, PM_QOS_CPU_FREQ_MAX_DEFAULT_VALUE);
	default:
		break;
	}
#endif /* CONFIG_BUS_DEVFREQ */
	return 0;
}
开发者ID:djmax81，项目名称:android_kernel_samsung_exynos5433_LL，代码行数:56，代码来源:gpu_control.c


示例9: bluetooth_pm_sleep_stop

/**
 * Stops the Sleep-Mode Protocol on the Host.
 */
static void bluetooth_pm_sleep_stop(void)
{
	unsigned long irq_flags;

	spin_lock_irqsave(&rw_lock, irq_flags);

	if (!test_bit(BT_PROTO, &flags)) {
		spin_unlock_irqrestore(&rw_lock, irq_flags);
		return;
	}

	printk("%s\n", __func__);	

	del_timer(&tx_timer);

//BT_S : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT
	uart_off_jiffies = 0;
	uart_on_jiffies = 0;

	del_timer(&uart_control_timer);
//BT_E : [CONBT-1475] LGC_BT_COMMON_IMP_KERNEL_UART_HCI_COMMAND_TIMEOUT

	clear_bit(BT_PROTO, &flags);

	if (test_bit(BT_ASLEEP, &flags)) {
		clear_bit(BT_ASLEEP, &flags);
	} 
#ifdef UART_CONTROL_MSM		
	else{
		/*Deactivate UART*/
		//hsuart_power(0); //block uart power off
	}
#endif/*UART_CONTROL_MSM*/
	atomic_inc(&open_count);

	spin_unlock_irqrestore(&rw_lock, irq_flags);

#ifdef QOS_REQUEST_MSM
	if(bsi->dma_qos_request == REQUESTED) {
		pm_qos_remove_request(&bsi->dma_qos);
		bsi->dma_qos_request = NOT_REQUESTED;
	}
#endif /* QOS_REQUEST_MSM */	

#ifdef QOS_REQUEST_TEGRA
			if (bsi->resume_min_frequency)
				pm_qos_remove_request(&bsi->resume_cpu_freq_req);
#endif/*QOS_REQUEST_TEGRA*/		
	
	if (disable_irq_wake(bsi->host_wake_irq))
		printk("%s, Couldn't disable hostwake IRQ wakeup mode\n", __func__);
	free_irq(bsi->host_wake_irq, NULL);
	
	wake_lock_timeout(&bsi->wake_lock, HZ / 2);
}
开发者ID:bju2000，项目名称:kernel_lge_msm8994，代码行数:58，代码来源:bluetooth-pm.c


示例10: cfboost_exit

static void __exit cfboost_exit(void)
{
	/* stop input events */
	input_unregister_handler(&cfb_input_handler);
	/* cancel pending work requests */
	cancel_work_sync(&boost);
	cancel_delayed_work_sync(&unboost);
	/* clean up */
	destroy_workqueue(cfb_wq);
	pm_qos_remove_request(&freq_req);
	pm_qos_remove_request(&core_req);
}
开发者ID:thypon，项目名称:bowser-kernel，代码行数:12，代码来源:input-cfboost.c


示例11: kbase_platform_dvfs_term

void kbase_platform_dvfs_term(void)
{
	if (mali_dvfs_wq)
		destroy_workqueue(mali_dvfs_wq);

#if defined(CONFIG_ARM_EXYNOS5420_BUS_DEVFREQ)
	pm_qos_remove_request(&exynos5_g3d_mif_qos);
	pm_qos_remove_request(&exynos5_g3d_int_qos);
	pm_qos_remove_request(&exynos5_g3d_cpu_qos);
#endif

	mali_dvfs_wq = NULL;
}
开发者ID:saiyamd，项目名称:P900-kernel-source，代码行数:13，代码来源:mali_kbase_dvfs.c


示例12: sec_gpu_pwr_clk_deinit

/* gpu power clock deinit */
int sec_gpu_pwr_clk_deinit(void)
{
	int ret = -1;
	gpu_clks_put();
	ret = gpu_regulator_disable();
	if (ret)
		PVR_DPF((PVR_DBG_ERROR, "gpu_regulator_disable error[%d]", ret));
#if defined(CONFIG_ARM_EXYNOS5410_BUS_DEVFREQ)
	pm_qos_remove_request(&exynos5_g3d_cpu_qos);
	pm_qos_remove_request(&exynos5_g3d_int_qos);
	pm_qos_remove_request(&exynos5_g3d_mif_qos);
#endif
	return ret;
}
开发者ID:Tambralinga，项目名称:odroidNetworking，代码行数:15，代码来源:sec_control_pwr_clk.c


示例13: fimg2d_pm_qos_remove

void fimg2d_pm_qos_remove(struct fimg2d_control *ctrl)
{
	struct fimg2d_platdata *pdata = to_fimg2d_plat(ctrl->dev);

#ifdef CONFIG_ARM_EXYNOS_IKS_CPUFREQ
	if (pdata->cpu_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_cpu_qos);
#endif
#ifdef CONFIG_FIMG2D_USE_BUS_DEVFREQ
	if (pdata->mif_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_mif_qos);
	if (pdata->int_min)
		pm_qos_remove_request(&ctrl->exynos5_g2d_int_qos);
#endif
}
开发者ID:lssjbrolli，项目名称:android_kernel_samsung_klimtlte，代码行数:15，代码来源:fimg2d_drv.c


示例14: mv_otg_remove

int mv_otg_remove(struct platform_device *pdev)
{
	struct mv_otg *mvotg = platform_get_drvdata(pdev);

	device_init_wakeup(&pdev->dev, 0);

	sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);

	if (mvotg->qwork) {
		flush_workqueue(mvotg->qwork);
		destroy_workqueue(mvotg->qwork);
	}

	if (mvotg->pdata->extern_attr
		& (MV_USB_HAS_VBUS_DETECTION | MV_USB_HAS_IDPIN_DETECTION))
		pxa_usb_unregister_notifier(mvotg->pdata->id, &mvotg->notifier);

	mv_otg_disable(mvotg);

	clk_unprepare(mvotg->clk);

	pm_qos_remove_request(&mvotg->qos_idle);

	usb_remove_phy(&mvotg->phy);

	return 0;
}
开发者ID:GalaxyTab4，项目名称:maxicm_kernel_samsung_degaswifi，代码行数:27，代码来源:phy-mv-usb.c


示例15: ath9k_deinit_device

void ath9k_deinit_device(struct ath_softc *sc)
{
	struct ieee80211_hw *hw = sc->hw;
	int i = 0;

	ath9k_ps_wakeup(sc);

	wiphy_rfkill_stop_polling(sc->hw->wiphy);
	ath_deinit_leds(sc);

	for (i = 0; i < sc->num_sec_wiphy; i++) {
		struct ath_wiphy *aphy = sc->sec_wiphy[i];
		if (aphy == NULL)
			continue;
		sc->sec_wiphy[i] = NULL;
		ieee80211_unregister_hw(aphy->hw);
		ieee80211_free_hw(aphy->hw);
	}

	ieee80211_unregister_hw(hw);
	pm_qos_remove_request(&ath9k_pm_qos_req);
	ath_rx_cleanup(sc);
	ath_tx_cleanup(sc);
	ath9k_deinit_softc(sc);
	kfree(sc->sec_wiphy);
}
开发者ID:Smackbox，项目名称:linux-2.6-sgt，代码行数:26，代码来源:init.c


示例16: debugfs_remove_request

static void debugfs_remove_request(int users)
{
	struct debugfs_pm_qos_user *user = NULL;
	int i;

	if (users > pm_qos_users) {
		pr_info("[DDR DEVFREQ DEBUGFS] no such user\n");
		return;
	}

	users--;
	user = pm_qos_user[users];

	pm_qos_remove_request(&user->req);
	kfree(user);
	pm_qos_user[users] = NULL;

	for (i = users + 1; i < PM_QOS_USERS; i++) {
		pm_qos_user[i - 1] = pm_qos_user[i];
		pm_qos_user[i] = NULL;
	}

	pm_qos_users--;
	return;
}
开发者ID:XMelancholy，项目名称:android_kernel_huawei_h60，代码行数:25，代码来源:hisi_ddr_devfreq_debugfs.c


示例17: sdhci_pxav3_remove

static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
{
	struct sdhci_host *host = platform_get_drvdata(pdev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = pltfm_host->priv;
	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;

	sdhci_remove_host(host, 1);
	if (pdata && pdata->flags & PXA_FLAG_EN_PM_RUNTIME)
		pm_runtime_disable(&pdev->dev);

	if (pdata)
		pm_qos_remove_request(&pdata->qos_idle);

	clk_disable_unprepare(pltfm_host->clk);
	clk_put(pltfm_host->clk);

	if (pdata && pdata->cd_type == PXA_SDHCI_CD_GPIO &&
			gpio_is_valid(pdata->ext_cd_gpio))
		mmc_gpio_free_cd(host->mmc);

	sdhci_pltfm_free(pdev);
	kfree(pxa);

	platform_set_drvdata(pdev, NULL);

	return 0;
}
开发者ID:TeamRegular，项目名称:android_kernel_samsung_lt02-common，代码行数:28，代码来源:sdhci-pxav3.c


示例18: omap_mcpdm_dai_shutdown

static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
				  struct snd_soc_dai *dai)
{
	struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
	int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
	int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
	int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;

	mutex_lock(&mcpdm->mutex);

	if (!dai->active) {
		if (omap_mcpdm_active(mcpdm)) {
			omap_mcpdm_stop(mcpdm);
			omap_mcpdm_close_streams(mcpdm);
			mcpdm->config[0].link_mask = 0;
			mcpdm->config[1].link_mask = 0;
		}
	}

	if (mcpdm->latency[stream2])
		pm_qos_update_request(&mcpdm->pm_qos_req,
				      mcpdm->latency[stream2]);
	else if (mcpdm->latency[stream1])
		pm_qos_remove_request(&mcpdm->pm_qos_req);

	mcpdm->latency[stream1] = 0;

	mutex_unlock(&mcpdm->mutex);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:29，代码来源:omap-mcpdm.c


示例19: usb_load

static void usb_load(struct work_struct *work)
{
	int cpu;
	unsigned int num_irqs = 0;
	static unsigned int old_num_irqs = UINT_MAX;

	for_each_online_cpu(cpu)
		num_irqs += kstat_irqs_cpu(IRQ_DB8500_USBOTG, cpu);

	if ((num_irqs > old_num_irqs) &&
	    (num_irqs - old_num_irqs) > USB_LIMIT) {
		prcmu_qos_update_requirement(PRCMU_QOS_ARM_OPP,
					     "usb", 125);
		if (!usb_pm_qos_is_latency_0) {
			usb_pm_qos_latency =
			pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY, 0);
			usb_pm_qos_is_latency_0 = true;
		}
	} else {
		prcmu_qos_update_requirement(PRCMU_QOS_ARM_OPP,
						"usb", 25);
		if (usb_pm_qos_is_latency_0) {
			pm_qos_remove_request(usb_pm_qos_latency);
			usb_pm_qos_is_latency_0 = false;
		}
	}
	old_num_irqs = num_irqs;

	schedule_delayed_work_on(0,
				 &work_usb_workaround,
				 msecs_to_jiffies(USB_PROBE_DELAY));
}
开发者ID:Krabappel2548，项目名称:u8500_kernel_sources，代码行数:32，代码来源:musb_db8500.c


示例20: msm_mctl_release

static int msm_mctl_release(struct msm_cam_media_controller *p_mctl)
{
	int rc = 0;
	struct msm_sync *sync = &(p_mctl->sync);

	v4l2_subdev_call(p_mctl->ispif_sdev, core, ioctl,
		VIDIOC_MSM_ISPIF_RELEASE, NULL);

	if (p_mctl->isp_sdev && p_mctl->isp_sdev->isp_release)
		p_mctl->isp_sdev->isp_release(&p_mctl->sync);

	v4l2_subdev_call(p_mctl->csid_sdev, core, ioctl,
		VIDIOC_MSM_CSID_RELEASE, NULL);

	v4l2_subdev_call(p_mctl->csiphy_sdev, core, ioctl,
		VIDIOC_MSM_CSIPHY_RELEASE, NULL);

	if (p_mctl->sync.actctrl.a_power_down)
		p_mctl->sync.actctrl.a_power_down(sync->sdata->actuator_info);

	if (p_mctl->sync.sctrl.s_release)
		p_mctl->sync.sctrl.s_release();

	rc = msm_camio_sensor_clk_off(sync->pdev);
	if (rc < 0)
		pr_err("%s: msm_camio_sensor_clk_off failed:%d\n",
			 __func__, rc);

	pm_qos_update_request(&p_mctl->pm_qos_req_list,
				PM_QOS_DEFAULT_VALUE);
	pm_qos_remove_request(&p_mctl->pm_qos_req_list);
	wake_unlock(&p_mctl->sync.wake_lock);

	return rc;
}
开发者ID:LiquidSmooth-Devices，项目名称:Deathly_Kernel_D2，代码行数:35，代码来源:msm_mctl.c



注：本文中的pm_qos_remove_request函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ pm_qos_request函数代码示例发布时间：2022-05-30
下一篇：
C++ pm_qos_add_request函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap