• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ pj_sock_getsockname函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pj_sock_getsockname函数的典型用法代码示例。如果您正苦于以下问题:C++ pj_sock_getsockname函数的具体用法?C++ pj_sock_getsockname怎么用?C++ pj_sock_getsockname使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pj_sock_getsockname函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: PJ_DEF

PJ_DEF(pj_status_t) pj_sock_get_qos_params(pj_sock_t sock,
        pj_qos_params *p_param)
{
    pj_status_t status;
    int val, optlen;
    pj_sockaddr sa;
    int salen = sizeof(salen);

    PJ_ASSERT_RETURN(p_param, PJ_EINVAL);

    pj_bzero(p_param, sizeof(*p_param));

    /* Try SO_NET_SERVICE_TYPE */
    status = sock_get_net_service_type_params(sock, p_param);
    if (status != PJ_ENOTSUP)
        return status;

    /* Fall back to IP_TOS/IPV6_TCLASS */
    status = pj_sock_getsockname(sock, &sa, &salen);
    if (status != PJ_SUCCESS)
        return status;

    optlen = sizeof(val);
    if (sa.addr.sa_family == pj_AF_INET()) {
        status = pj_sock_getsockopt(sock, pj_SOL_IP(), pj_IP_TOS(),
                                    &val, &optlen);
    } else if (sa.addr.sa_family == pj_AF_INET6()) {
        status = pj_sock_getsockopt(sock, pj_SOL_IPV6(), pj_IPV6_TCLASS(),
                                    &val, &optlen);
    } else
        status = PJ_EINVAL;
    if (status == PJ_SUCCESS) {
        p_param->flags |= PJ_QOS_PARAM_HAS_DSCP;
        p_param->dscp_val = (pj_uint8_t)(val >> 2);
    }
开发者ID:pjsip,项目名称:pjproject,代码行数:35,代码来源:sock_qos_darwin.c


示例2: PJ_DEF

/* Get the default IP interface */
PJ_DEF(pj_status_t) pj_getdefaultipinterface(int af, pj_sockaddr *addr)
{
    pj_sock_t fd;
    pj_str_t cp;
    pj_sockaddr a;
    int len;
    pj_uint8_t zero[64];
    pj_status_t status;

    addr->addr.sa_family = (pj_uint16_t)af;

    status = pj_sock_socket(af, pj_SOCK_DGRAM(), 0, &fd);
    if (status != PJ_SUCCESS) {
	return status;
	}
	PJ_LOG(4, ("sock_common.c", "pj_getdefaultipinterface() pj_sock_socket."));

    if (af == PJ_AF_INET) {
	cp = pj_str("1.1.1.1");
    } else {
	cp = pj_str("1::1");
    }
    status = pj_sockaddr_init(af, &a, &cp, 53);
    if (status != PJ_SUCCESS) {
	pj_sock_close(fd);
	return status;
	}
	PJ_LOG(4, ("sock_common.c", "pj_getdefaultipinterface() pj_sockaddr_init."));

    status = pj_sock_connect(fd, &a, pj_sockaddr_get_len(&a));
    if (status != PJ_SUCCESS) {
	pj_sock_close(fd);
	return status;
	}
	PJ_LOG(4, ("sock_common.c", "pj_getdefaultipinterface() pj_sock_connect."));

    len = sizeof(a);
    status = pj_sock_getsockname(fd, &a, &len);
    if (status != PJ_SUCCESS) {
	pj_sock_close(fd);
	return status;
	}
	PJ_LOG(4, ("sock_common.c", "pj_getdefaultipinterface() pj_sock_getsockname."));

    pj_sock_close(fd);

    /* Check that the address returned is not zero */
    pj_bzero(zero, sizeof(zero));
    if (pj_memcmp(pj_sockaddr_get_addr(&a), zero,
		  pj_sockaddr_get_addr_len(&a))==0)
	{
		PJ_LOG(4, ("sock_common.c", "pj_getdefaultipinterface() interface not found."));
		return PJ_ENOTFOUND;
    }

    pj_sockaddr_copy_addr(addr, &a);

    /* Success */
    return PJ_SUCCESS;
}
开发者ID:Antares84,项目名称:asuswrt-merlin,代码行数:61,代码来源:sock_common.c


示例3: PJ_DEF

PJ_DEF(pj_status_t) pj_sock_get_qos_params(pj_sock_t sock,
					   pj_qos_params *p_param)
{
    pj_status_t last_err = PJ_ENOTSUP;
    int val, optlen;
    pj_sockaddr sa;
    int salen = sizeof(salen);
    pj_status_t status;

    pj_bzero(p_param, sizeof(*p_param));

    /* Get DSCP/TOS value */
    status = pj_sock_getsockname(sock, &sa, &salen);
    if (status == PJ_SUCCESS) {
	optlen = sizeof(val);
	if (sa.addr.sa_family == pj_AF_INET()) {
	    status = pj_sock_getsockopt(sock, pj_SOL_IP(), pj_IP_TOS(), 
					&val, &optlen);
	} else if (sa.addr.sa_family == pj_AF_INET6()) {
	    status = pj_sock_getsockopt(sock, pj_SOL_IPV6(),
					pj_IPV6_TCLASS(),
					&val, &optlen);
	} else {
	    status = PJ_EINVAL;
	}

        if (status == PJ_SUCCESS) {
    	    p_param->flags |= PJ_QOS_PARAM_HAS_DSCP;
	    p_param->dscp_val = (pj_uint8_t)(val >> 2);
	} else {
开发者ID:elimelec,项目名称:pjproject,代码行数:30,代码来源:sock_qos_bsd.c


示例4: on_ioqueue_accept

static void on_ioqueue_accept(pj_ioqueue_key_t *key, 
                              pj_ioqueue_op_key_t *op_key,
                              pj_sock_t sock, 
                              int status)
{
    if (sock == PJ_INVALID_SOCKET) {

	if (status != PJ_SUCCESS) {
	    /* Ignore. Could be blocking error */
	    app_perror(".....warning: received error in on_ioqueue_accept() callback",
		       status);
	} else {
	    callback_accept_status = -61;
	    PJ_LOG(3,("", "..... on_ioqueue_accept() callback was given "
			  "invalid socket and status is %d", status));
	}
    } else {
        pj_sockaddr addr;
        int client_addr_len;

        client_addr_len = sizeof(addr);
        status = pj_sock_getsockname(sock, &addr, &client_addr_len);
        if (status != PJ_SUCCESS) {
            app_perror("...ERROR in pj_sock_getsockname()", status);
        }

	callback_accept_key = key;
	callback_accept_op = op_key;
	callback_accept_status = status;
	callback_call_count++;
    }
}
开发者ID:AmoebaLabs,项目名称:pjsip,代码行数:32,代码来源:ioq_tcp.c


示例5: PJ_DEF

PJ_DEF(pj_status_t) pj_activesock_create_udp( pj_pool_t *pool,
					      const pj_sockaddr *addr,
					      const pj_activesock_cfg *opt,
					      pj_ioqueue_t *ioqueue,
					      const pj_activesock_cb *cb,
					      void *user_data,
					      pj_activesock_t **p_asock,
					      pj_sockaddr *bound_addr)
{
    pj_sock_t sock_fd;
    pj_sockaddr default_addr;
    pj_status_t status;

    if (addr == NULL) {
	pj_sockaddr_init(pj_AF_INET(), &default_addr, NULL, 0);
	addr = &default_addr;
    }

    status = pj_sock_socket(addr->addr.sa_family, pj_SOCK_DGRAM(), 0, 
			    &sock_fd);
    if (status != PJ_SUCCESS) {
	return status;
    }

    status = pj_sock_bind(sock_fd, addr, pj_sockaddr_get_len(addr));
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock_fd);
	return status;
    }

    status = pj_activesock_create(pool, sock_fd, pj_SOCK_DGRAM(), opt,
				  ioqueue, cb, user_data, p_asock);
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock_fd);
	return status;
    }

    if (bound_addr) {
	int addr_len = sizeof(*bound_addr);
	status = pj_sock_getsockname(sock_fd, bound_addr, &addr_len);
	if (status != PJ_SUCCESS) {
	    pj_activesock_close(*p_asock);
	    return status;
	}
    }

    return PJ_SUCCESS;
}
开发者ID:0x0B501E7E,项目名称:pjproject,代码行数:48,代码来源:activesock.c


示例6: get_local_interface

static pj_status_t get_local_interface(const pj_sockaddr *server,
				       pj_sockaddr *local_addr)
{
    pj_sock_t sock;
    pj_sockaddr tmp, local;
    int addr_len;
    pj_status_t status;

    status = pj_sock_socket(server->addr.sa_family, pj_SOCK_DGRAM(),
    			    0, &sock);
    if (status != PJ_SUCCESS)
	return status;

    addr_len = pj_sockaddr_get_len(server);
    pj_sockaddr_init(server->addr.sa_family, &local, NULL, 0);
    status = pj_sock_bind(sock, &local, addr_len);
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock);
	return status;
    }

    status = pj_sock_connect(sock, server, addr_len);
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock);
	return status;
    }

    status = pj_sock_getsockname(sock, &tmp, &addr_len);
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock);
	return status;
    }

    pj_sockaddr_cp(local_addr, &tmp);
    
    pj_sock_close(sock);
    return PJ_SUCCESS;
}
开发者ID:batk0,项目名称:pjsip,代码行数:38,代码来源:nat_detect.c


示例7: sock_set_ip_ds

static pj_status_t sock_set_ip_ds(pj_sock_t sock, pj_qos_params *param)
{
    pj_status_t status = PJ_SUCCESS;

    PJ_ASSERT_RETURN(param, PJ_EINVAL);

    if (param->flags & PJ_QOS_PARAM_HAS_DSCP) {
        /* We need to know if the socket is IPv4 or IPv6 */
        pj_sockaddr sa;
        int salen = sizeof(salen);

        /* Value is dscp_val << 2 */
        int val = (param->dscp_val << 2);

        status = pj_sock_getsockname(sock, &sa, &salen);
        if (status != PJ_SUCCESS)
            return status;

        if (sa.addr.sa_family == pj_AF_INET()) {
            /* In IPv4, the DS field goes in the TOS field */
            status = pj_sock_setsockopt(sock, pj_SOL_IP(), pj_IP_TOS(),
                                        &val, sizeof(val));
        } else if (sa.addr.sa_family == pj_AF_INET6()) {
            /* In IPv6, the DS field goes in the Traffic Class field */
            status = pj_sock_setsockopt(sock, pj_SOL_IPV6(),
                                        pj_IPV6_TCLASS(),
                                        &val, sizeof(val));
        } else
            status = PJ_EINVAL;

        if (status != PJ_SUCCESS) {
            param->flags &= ~(PJ_QOS_PARAM_HAS_DSCP);
        }
    }

    return status;
}
开发者ID:pjsip,项目名称:pjproject,代码行数:37,代码来源:sock_qos_darwin.c


示例8: get_local_interface

static pj_status_t get_local_interface(const pj_sockaddr_in *server,
				       pj_in_addr *local_addr)
{
    pj_sock_t sock;
    pj_sockaddr_in tmp;
    int addr_len;
    pj_status_t status;

    status = pj_sock_socket(pj_AF_INET(), pj_SOCK_DGRAM(), 0, &sock);
    if (status != PJ_SUCCESS)
	return status;

    status = pj_sock_bind_in(sock, 0, 0);
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock);
	return status;
    }

    status = pj_sock_connect(sock, server, sizeof(pj_sockaddr_in));
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock);
	return status;
    }

    addr_len = sizeof(pj_sockaddr_in);
    status = pj_sock_getsockname(sock, &tmp, &addr_len);
    if (status != PJ_SUCCESS) {
	pj_sock_close(sock);
	return status;
    }

    local_addr->s_addr = tmp.sin_addr.s_addr;
    
    pj_sock_close(sock);
    return PJ_SUCCESS;
}
开发者ID:zndxlx,项目名称:pjsip_r,代码行数:36,代码来源:nat_detect.c


示例9: get_published_name

/* Generate transport's published address */
static pj_status_t get_published_name(pj_sock_t sock,
				      char hostbuf[],
				      int hostbufsz,
				      pjsip_host_port *bound_name)
{
    pj_sockaddr tmp_addr;
    int addr_len;
    pj_status_t status;

    addr_len = sizeof(tmp_addr);
    status = pj_sock_getsockname(sock, &tmp_addr, &addr_len);
    if (status != PJ_SUCCESS)
	return status;

    bound_name->host.ptr = hostbuf;
    if (tmp_addr.addr.sa_family == pj_AF_INET()) {
	bound_name->port = pj_ntohs(tmp_addr.ipv4.sin_port);

	/* If bound address specifies "0.0.0.0", get the IP address
	 * of local hostname.
	 */
	if (tmp_addr.ipv4.sin_addr.s_addr == PJ_INADDR_ANY) {
	    pj_sockaddr hostip;

	    status = pj_gethostip(pj_AF_INET(), &hostip);
	    if (status != PJ_SUCCESS)
		return status;

	    pj_strcpy2(&bound_name->host, pj_inet_ntoa(hostip.ipv4.sin_addr));
	} else {
	    /* Otherwise use bound address. */
	    pj_strcpy2(&bound_name->host, 
		       pj_inet_ntoa(tmp_addr.ipv4.sin_addr));
	    status = PJ_SUCCESS;
	}

    } else {
	/* If bound address specifies "INADDR_ANY" (IPv6), get the
         * IP address of local hostname
         */
	pj_uint32_t loop6[4] = { 0, 0, 0, 0};

	bound_name->port = pj_ntohs(tmp_addr.ipv6.sin6_port);

	if (pj_memcmp(&tmp_addr.ipv6.sin6_addr, loop6, sizeof(loop6))==0) {
	    status = pj_gethostip(tmp_addr.addr.sa_family, &tmp_addr);
	    if (status != PJ_SUCCESS)
		return status;
	}

	status = pj_inet_ntop(tmp_addr.addr.sa_family, 
			      pj_sockaddr_get_addr(&tmp_addr),
			      hostbuf, hostbufsz);
	if (status == PJ_SUCCESS) {
	    bound_name->host.slen = pj_ansi_strlen(hostbuf);
	}
    }


    return status;
}
开发者ID:avble,项目名称:natClientEx,代码行数:62,代码来源:sip_transport_udp.c


示例10: transport_attach

/*
 * pjsip_udp_transport_attach()
 *
 * Attach UDP socket and start transport.
 */
static pj_status_t transport_attach( pjsip_endpoint *endpt,
				     pjsip_transport_type_e type,
				     pj_sock_t sock,
				     const pjsip_host_port *a_name,
				     unsigned async_cnt,
				     pjsip_transport **p_transport)
{
    pj_pool_t *pool;
    struct udp_transport *tp;
    const char *format, *ipv6_quoteb, *ipv6_quotee;
    unsigned i;
    pj_status_t status;

    PJ_ASSERT_RETURN(endpt && sock!=PJ_INVALID_SOCKET && a_name && async_cnt>0,
		     PJ_EINVAL);

    /* Object name. */
    if (type & PJSIP_TRANSPORT_IPV6) {
	format = "udpv6%p";
	ipv6_quoteb = "[";
	ipv6_quotee = "]";
    } else {
	format = "udp%p";
	ipv6_quoteb = ipv6_quotee = "";
    }

    /* Create pool. */
    pool = pjsip_endpt_create_pool(endpt, format, PJSIP_POOL_LEN_TRANSPORT, 
				   PJSIP_POOL_INC_TRANSPORT);
    if (!pool)
	return PJ_ENOMEM;

    /* Create the UDP transport object. */
    tp = PJ_POOL_ZALLOC_T(pool, struct udp_transport);

    /* Save pool. */
    tp->base.pool = pool;

    pj_memcpy(tp->base.obj_name, pool->obj_name, PJ_MAX_OBJ_NAME);

    /* Init reference counter. */
    status = pj_atomic_create(pool, 0, &tp->base.ref_cnt);
    if (status != PJ_SUCCESS)
	goto on_error;

    /* Init lock. */
    status = pj_lock_create_recursive_mutex(pool, pool->obj_name, 
					    &tp->base.lock);
    if (status != PJ_SUCCESS)
	goto on_error;

    /* Set type. */
    tp->base.key.type = type;

    /* Remote address is left zero (except the family) */
    tp->base.key.rem_addr.addr.sa_family = (pj_uint16_t)
	((type & PJSIP_TRANSPORT_IPV6) ? pj_AF_INET6() : pj_AF_INET());

    /* Type name. */
    tp->base.type_name = "UDP";

    /* Transport flag */
    tp->base.flag = pjsip_transport_get_flag_from_type(type);


    /* Length of addressess. */
    tp->base.addr_len = sizeof(tp->base.local_addr);

    /* Init local address. */
    status = pj_sock_getsockname(sock, &tp->base.local_addr, 
				 &tp->base.addr_len);
    if (status != PJ_SUCCESS)
	goto on_error;

    /* Init remote name. */
    if (type == PJSIP_TRANSPORT_UDP)
	tp->base.remote_name.host = pj_str("0.0.0.0");
    else
	tp->base.remote_name.host = pj_str("::0");
    tp->base.remote_name.port = 0;

    /* Init direction */
    tp->base.dir = PJSIP_TP_DIR_NONE;

    /* Set endpoint. */
    tp->base.endpt = endpt;

    /* Transport manager and timer will be initialized by tpmgr */

    /* Attach socket and assign name. */
    udp_set_socket(tp, sock, a_name);

    /* Register to ioqueue */
    status = register_to_ioqueue(tp);
    if (status != PJ_SUCCESS)
//.........这里部分代码省略.........
开发者ID:avble,项目名称:natClientEx,代码行数:101,代码来源:sip_transport_udp.c


示例11: unregister_test

/*
 * unregister_test()
 * Check if callback is still called after socket has been unregistered or 
 * closed.
 */ 
static int unregister_test(pj_bool_t allow_concur)
{
    enum { RPORT = 50000, SPORT = 50001 };
    pj_pool_t *pool;
    pj_ioqueue_t *ioqueue;
    pj_sock_t ssock;
    pj_sock_t rsock;
    int addrlen;
    pj_sockaddr_in addr;
    pj_ioqueue_key_t *key;
    pj_ioqueue_op_key_t opkey;
    pj_ioqueue_callback cb;
    unsigned packet_cnt;
    char sendbuf[10], recvbuf[10];
    pj_ssize_t bytes;
    pj_time_val timeout;
    pj_status_t status;

    pool = pj_pool_create(mem, "test", 4000, 4000, NULL);
    if (!pool) {
	app_perror("Unable to create pool", PJ_ENOMEM);
	return -100;
    }

    status = pj_ioqueue_create(pool, 16, &ioqueue);
    if (status != PJ_SUCCESS) {
	app_perror("Error creating ioqueue", status);
	return -110;
    }

    // Set concurrency
    TRACE_("set concurrency...");
    status = pj_ioqueue_set_default_concurrency(ioqueue, allow_concur);
    if (status != PJ_SUCCESS) {
	return -112;
    }

    /* Create sender socket */
    status = app_socket(pj_AF_INET(), pj_SOCK_DGRAM(), 0, SPORT, &ssock);
    if (status != PJ_SUCCESS) {
	app_perror("Error initializing socket", status);
	return -120;
    }

    /* Create receiver socket. */
    status = app_socket(pj_AF_INET(), pj_SOCK_DGRAM(), 0, RPORT, &rsock);
    if (status != PJ_SUCCESS) {
	app_perror("Error initializing socket", status);
	return -130;
    }

    /* Register rsock to ioqueue. */
    pj_bzero(&cb, sizeof(cb));
    cb.on_read_complete = &on_read_complete;
    packet_cnt = 0;
    status = pj_ioqueue_register_sock(pool, ioqueue, rsock, &packet_cnt,
				      &cb, &key);
    if (status != PJ_SUCCESS) {
	app_perror("Error registering to ioqueue", status);
	return -140;
    }

    /* Init operation key. */
    pj_ioqueue_op_key_init(&opkey, sizeof(opkey));

    /* Start reading. */
    bytes = sizeof(recvbuf);
    status = pj_ioqueue_recv( key, &opkey, recvbuf, &bytes, 0);
    if (status != PJ_EPENDING) {
	app_perror("Expecting PJ_EPENDING, but got this", status);
	return -150;
    }

    /* Init destination address. */
    addrlen = sizeof(addr);
    status = pj_sock_getsockname(rsock, &addr, &addrlen);
    if (status != PJ_SUCCESS) {
	app_perror("getsockname error", status);
	return -160;
    }

    /* Override address with 127.0.0.1, since getsockname will return
     * zero in the address field.
     */
    addr.sin_addr = pj_inet_addr2("127.0.0.1");

    /* Init buffer to send */
    pj_ansi_strcpy(sendbuf, "Hello0123");

    /* Send one packet. */
    bytes = sizeof(sendbuf);
    status = pj_sock_sendto(ssock, sendbuf, &bytes, 0,
			    &addr, sizeof(addr));

    if (status != PJ_SUCCESS) {
//.........这里部分代码省略.........
开发者ID:AbhaySingh,项目名称:pjproject,代码行数:101,代码来源:ioq_udp.c


示例12: PJ_DEF

/*
 * Restart transport.
 *
 * If option is KEEP_SOCKET, just re-activate ioqueue operation.
 *
 * If option is DESTROY_SOCKET:
 *  - if socket is specified, replace.
 *  - if socket is not specified, create and replace.
 */
PJ_DEF(pj_status_t) pjsip_udp_transport_restart(pjsip_transport *transport,
					        unsigned option,
						pj_sock_t sock,
						const pj_sockaddr_in *local,
						const pjsip_host_port *a_name)
{
    struct udp_transport *tp;
    pj_status_t status;

    PJ_ASSERT_RETURN(transport != NULL, PJ_EINVAL);
    /* Flag must be specified */
    PJ_ASSERT_RETURN((option & 0x03) != 0, PJ_EINVAL);

    tp = (struct udp_transport*) transport;

    if (option & PJSIP_UDP_TRANSPORT_DESTROY_SOCKET) {
	char addr_buf[PJ_INET6_ADDRSTRLEN];
	pjsip_host_port bound_name;

	/* Request to recreate transport */

	/* Destroy existing socket, if any. */
	if (tp->key) {
	    /* This implicitly closes the socket */
	    pj_ioqueue_unregister(tp->key);
	    tp->key = NULL;
	} else {
	    /* Close socket. */
	    if (tp->sock && tp->sock != PJ_INVALID_SOCKET) {
		pj_sock_close(tp->sock);
		tp->sock = PJ_INVALID_SOCKET;
	    }
	}
	tp->sock = PJ_INVALID_SOCKET;

	/* Create the socket if it's not specified */
	if (sock == PJ_INVALID_SOCKET) {
	    status = create_socket(pj_AF_INET(), local, 
				   sizeof(pj_sockaddr_in), &sock);
	    if (status != PJ_SUCCESS)
		return status;
	}

	/* If transport published name is not specified, calculate it
	 * from the bound address.
	 */
	if (a_name == NULL) {
	    status = get_published_name(sock, addr_buf, sizeof(addr_buf),
					&bound_name);
	    if (status != PJ_SUCCESS) {
		pj_sock_close(sock);
		return status;
	    }

	    a_name = &bound_name;
	}

        /* Init local address. */
        status = pj_sock_getsockname(sock, &tp->base.local_addr, 
				     &tp->base.addr_len);
        if (status != PJ_SUCCESS) {
            pj_sock_close(sock);
            return status;
        }

	/* Assign the socket and published address to transport. */
	udp_set_socket(tp, sock, a_name);

    } else {

	/* For KEEP_SOCKET, transport must have been paused before */
	PJ_ASSERT_RETURN(tp->is_paused, PJ_EINVALIDOP);

	/* If address name is specified, update it */
	if (a_name != NULL)
	    udp_set_pub_name(tp, a_name);
    }

    /* Re-register new or existing socket to ioqueue. */
    status = register_to_ioqueue(tp);
    if (status != PJ_SUCCESS) {
	return status;
    }

    /* Restart async read operation. */
    status = start_async_read(tp);
    if (status != PJ_SUCCESS)
	return status;

    /* Everything has been set up */
    tp->is_paused = PJ_FALSE;
//.........这里部分代码省略.........
开发者ID:avble,项目名称:natClientEx,代码行数:101,代码来源:sip_transport_udp.c


示例13: stun_destroy_test

static int stun_destroy_test(void)
{
    enum { LOOP = 500 };
    struct stun_test_session test_sess;
    pj_sockaddr bind_addr;
    int addr_len;
    pj_caching_pool cp;
    pj_pool_t *pool;
    unsigned i;
    pj_status_t status;
    int rc = 0;

    PJ_LOG(3,(THIS_FILE, "  STUN destroy concurrency test"));

    pj_bzero(&test_sess, sizeof(test_sess));

    pj_caching_pool_init(&cp, NULL, 0);
    pool = pj_pool_create(&cp.factory, "testsess", 512, 512, NULL);

    pj_stun_config_init(&test_sess.stun_cfg, &cp.factory, 0, NULL, NULL);

    status = pj_timer_heap_create(pool, 1023, &test_sess.stun_cfg.timer_heap);
    pj_assert(status == PJ_SUCCESS);

    status = pj_lock_create_recursive_mutex(pool, NULL, &test_sess.lock);
    pj_assert(status == PJ_SUCCESS);

    pj_timer_heap_set_lock(test_sess.stun_cfg.timer_heap, test_sess.lock, PJ_TRUE);
    pj_assert(status == PJ_SUCCESS);

    status = pj_ioqueue_create(pool, 512, &test_sess.stun_cfg.ioqueue);
    pj_assert(status == PJ_SUCCESS);

    pj_sock_socket(pj_AF_INET(), pj_SOCK_DGRAM(), 0, &test_sess.server_sock);
    pj_sockaddr_init(pj_AF_INET(), &bind_addr, NULL, 0);
    status = pj_sock_bind(test_sess.server_sock, &bind_addr, pj_sockaddr_get_len(&bind_addr));
    pj_assert(status == PJ_SUCCESS);

    addr_len = sizeof(bind_addr);
    status = pj_sock_getsockname(test_sess.server_sock, &bind_addr, &addr_len);
    pj_assert(status == PJ_SUCCESS);

    test_sess.server_port = pj_sockaddr_get_port(&bind_addr);

    status = pj_event_create(pool, NULL, PJ_TRUE, PJ_FALSE, &test_sess.server_event);
    pj_assert(status == PJ_SUCCESS);

    for (i=0; i<SERVER_THREAD_CNT; ++i) {
	status = pj_thread_create(pool, NULL,
	                          &server_thread_proc, &test_sess,
	                          0, 0, &test_sess.server_threads[i]);
	pj_assert(status == PJ_SUCCESS);
    }

    for (i=0; i<WORKER_THREAD_CNT; ++i) {
	status = pj_thread_create(pool, NULL,
	                          &worker_thread_proc, &test_sess,
	                          0, 0, &test_sess.worker_threads[i]);
	pj_assert(status == PJ_SUCCESS);
    }

    /* Test 1: Main thread calls destroy while callback is processing response */
    PJ_LOG(3,(THIS_FILE, "    Destroy in main thread while callback is running"));
    for (i=0; i<LOOP; ++i) {
	int sleep = pj_rand() % 5;

	PJ_LOG(3,(THIS_FILE, "      Try %-3d of %d", i+1, LOOP));

	/* Test 1: destroy at the same time when receiving response */
	pj_bzero(&test_sess.param, sizeof(test_sess.param));
	test_sess.param.client_sleep_after_start = 20;
	test_sess.param.client_sleep_before_destroy = sleep;
	test_sess.param.server_wait_for_event = PJ_TRUE;
	stun_destroy_test_session(&test_sess);
	PJ_LOG(3,(THIS_FILE,
		  "        stun test a: sleep delay:%d: clients with response: %d",
		  sleep, test_sess.param.client_got_response));

	/* Test 2: destroy at the same time with STUN retransmit timer */
	test_sess.param.server_drop_request = PJ_TRUE;
	test_sess.param.client_sleep_after_start = 0;
	test_sess.param.client_sleep_before_destroy = PJ_STUN_RTO_VALUE;
	test_sess.param.server_wait_for_event = PJ_FALSE;
	stun_destroy_test_session(&test_sess);
	PJ_LOG(3,(THIS_FILE, "        stun test b: retransmit concurrency"));

	/* Test 3: destroy at the same time with receiving response
	 * AND STUN retransmit timer */
	test_sess.param.client_got_response = 0;
	test_sess.param.server_drop_request = PJ_FALSE;
	test_sess.param.client_sleep_after_start = PJ_STUN_RTO_VALUE;
	test_sess.param.client_sleep_before_destroy = 0;
	test_sess.param.server_wait_for_event = PJ_TRUE;
	stun_destroy_test_session(&test_sess);
	PJ_LOG(3,(THIS_FILE,
		  "        stun test c: clients with response: %d",
		  test_sess.param.client_got_response));

	pj_thread_sleep(10);

//.........这里部分代码省略.........
开发者ID:AmoebaLabs,项目名称:pjsip,代码行数:101,代码来源:concur_test.c


示例14: PJ_DEF

/* Get info */
PJ_DEF(pj_status_t) pj_stun_sock_get_info( pj_stun_sock *stun_sock,
					   pj_stun_sock_info *info)
{
    int addr_len;
    pj_status_t status;

    PJ_ASSERT_RETURN(stun_sock && info, PJ_EINVAL);

    /* Copy STUN server address and mapped address */
    pj_memcpy(&info->srv_addr, &stun_sock->srv_addr,
	      sizeof(pj_sockaddr));
    pj_memcpy(&info->mapped_addr, &stun_sock->mapped_addr, 
	      sizeof(pj_sockaddr));

    /* Retrieve bound address */
    addr_len = sizeof(info->bound_addr);
    status = pj_sock_getsockname(stun_sock->sock_fd, &info->bound_addr,
				 &addr_len);
    if (status != PJ_SUCCESS)
	return status;

    /* If socket is bound to a specific interface, then only put that
     * interface in the alias list. Otherwise query all the interfaces 
     * in the host.
     */
    if (pj_sockaddr_has_addr(&info->bound_addr)) {
	info->alias_cnt = 1;
	pj_sockaddr_cp(&info->aliases[0], &info->bound_addr);
    } else {
	pj_sockaddr def_addr;
	pj_uint16_t port = pj_sockaddr_get_port(&info->bound_addr); 
	unsigned i;

	/* Get the default address */
	status = pj_gethostip(stun_sock->af, &def_addr);
	if (status != PJ_SUCCESS)
	    return status;
	
	pj_sockaddr_set_port(&def_addr, port);
	
	/* Enum all IP interfaces in the host */
	info->alias_cnt = PJ_ARRAY_SIZE(info->aliases);
	status = pj_enum_ip_interface(stun_sock->af, &info->alias_cnt, 
				      info->aliases);
	if (status != PJ_SUCCESS)
	    return status;

	/* Set the port number for each address.
	 */
	for (i=0; i<info->alias_cnt; ++i) {
	    pj_sockaddr_set_port(&info->aliases[i], port);
	}

	/* Put the default IP in the first slot */
	for (i=0; i<info->alias_cnt; ++i) {
	    if (pj_sockaddr_cmp(&info->aliases[i], &def_addr)==0) {
		if (i!=0) {
		    pj_sockaddr_cp(&info->aliases[i], &info->aliases[0]);
		    pj_sockaddr_cp(&info->aliases[0], &def_addr);
		}
		break;
	    }
	}
    }

    return PJ_SUCCESS;
}
开发者ID:AmongOthers,项目名称:PJSIP-iOS,代码行数:68,代码来源:stun_sock.c


示例15: pj_stun_detect_nat_type

pj_status_t pj_stun_detect_nat_type(const pj_sockaddr_in *server,
					    pj_stun_config *stun_cfg,
					    void *user_data,
					    pj_stun_nat_detect_cb *cb)
{
    pj_pool_t *pool;
    nat_detect_session *sess;
    pj_stun_session_cb sess_cb;
    pj_ioqueue_callback ioqueue_cb;
    int addr_len;
    pj_status_t status;

    PJ_ASSERT_RETURN(server && stun_cfg, PJ_EINVAL);
    PJ_ASSERT_RETURN(stun_cfg->pf && stun_cfg->ioqueue && stun_cfg->timer_heap,
		     PJ_EINVAL);

    /*
     * Init NAT detection session.
     */
    pool = pj_pool_create(stun_cfg->pf, "natck%p", PJNATH_POOL_LEN_NATCK, 
			  PJNATH_POOL_INC_NATCK, NULL);
    if (!pool)
	return PJ_ENOMEM;

    sess = PJ_POOL_ZALLOC_T(pool, nat_detect_session);
    sess->pool = pool;
    sess->user_data = user_data;
    sess->cb = cb;

    status = pj_grp_lock_create(pool, NULL, &sess->grp_lock);
    if (status != PJ_SUCCESS) {
	/* Group lock not created yet, just destroy pool and return */
	pj_pool_release(pool);
	return status;
    }

    pj_grp_lock_add_ref(sess->grp_lock);
    pj_grp_lock_add_handler(sess->grp_lock, pool, sess, &sess_on_destroy);

    pj_memcpy(&sess->server, server, sizeof(pj_sockaddr_in));

    /*
     * Init timer to self-destroy.
     */
    sess->timer_heap = stun_cfg->timer_heap;
    sess->timer.cb = &on_sess_timer;
    sess->timer.user_data = sess;


    /*
     * Initialize socket.
     */
    status = pj_sock_socket(pj_AF_INET(), pj_SOCK_DGRAM(), 0, &sess->sock);
    if (status != PJ_SUCCESS)
	goto on_error;

    /*
     * Bind to any.
     */
    pj_bzero(&sess->local_addr, sizeof(pj_sockaddr_in));
    sess->local_addr.sin_family = pj_AF_INET();
    status = pj_sock_bind(sess->sock, &sess->local_addr, 
			  sizeof(pj_sockaddr_in));
    if (status != PJ_SUCCESS)
	goto on_error;

    /*
     * Get local/bound address.
     */
    addr_len = sizeof(sess->local_addr);
    status = pj_sock_getsockname(sess->sock, &sess->local_addr, &addr_len);
    if (status != PJ_SUCCESS)
	goto on_error;

    /*
     * Find out which interface is used to send to the server.
     */
    status = get_local_interface(server, &sess->local_addr.sin_addr);
    if (status != PJ_SUCCESS)
	goto on_error;

    PJ_LOG(5,(sess->pool->obj_name, "Local address is %s:%d",
	      pj_inet_ntoa(sess->local_addr.sin_addr), 
	      pj_ntohs(sess->local_addr.sin_port)));

    PJ_LOG(5,(sess->pool->obj_name, "Server set to %s:%d",
	      pj_inet_ntoa(server->sin_addr), 
	      pj_ntohs(server->sin_port)));

    /*
     * Register socket to ioqueue to receive asynchronous input
     * notification.
     */
    pj_bzero(&ioqueue_cb, sizeof(ioqueue_cb));
    ioqueue_cb.on_read_complete = &on_read_complete;

    status = pj_ioqueue_register_sock2(sess->pool, stun_cfg->ioqueue, 
				       sess->sock, sess->grp_lock, sess,
				       &ioqueue_cb, &sess->key);
    if (status != PJ_SUCCESS)
//.........这里部分代码省略.........
开发者ID:zndxlx,项目名称:pjsip_r,代码行数:101,代码来源:nat_detect.c


示例16: create_std_server

/* Instantiate standard server */
static int create_std_server(pj_stun_auth_type auth_type,
			     pj_bool_t responding)
{
    pj_pool_t *pool;
    pj_stun_session_cb sess_cb;
    pj_stun_auth_cred cred;
    pj_status_t status;
    
    /* Create server */
    pool = pj_pool_create(mem, "server", 1000, 1000, NULL);
    server = PJ_POOL_ZALLOC_T(pool, struct server);
    server->pool = pool;
    server->auth_type = auth_type;
    server->responding = responding;

    /* Create STUN session */
    pj_bzero(&sess_cb, sizeof(sess_cb));
    sess_cb.on_rx_request = &server_on_rx_request;
    sess_cb.on_send_msg = &server_send_msg;
    status = pj_stun_session_create(&stun_cfg, "server", &sess_cb, PJ_FALSE, NULL, &server->sess);
    if (status != PJ_SUCCESS) {
	destroy_server();
	return -10;
    }

    /* Configure credential */
    pj_bzero(&cred, sizeof(cred));
    cred.type = PJ_STUN_AUTH_CRED_DYNAMIC;
    cred.data.dyn_cred.get_auth = &server_get_auth;
    cred.data.dyn_cred.get_password = &server_get_password;
    cred.data.dyn_cred.verify_nonce = &server_verify_nonce;
    status = pj_stun_session_set_credential(server->sess, auth_type, &cred);
    if (status != PJ_SUCCESS) {
	destroy_server();
	return -20;
    }

    /* Create socket */
    status = pj_sock_socket(pj_AF_INET(), pj_SOCK_DGRAM(), 0, &server->sock);
    if (status != PJ_SUCCESS) {
	destroy_server();
	return -30;
    }

    /* Bind */
    pj_sockaddr_in_init(&server->addr.ipv4, NULL, 0);
    status = pj_sock_bind(server->sock, &server->addr, pj_sockaddr_get_len(&server->addr));
    if (status != PJ_SUCCESS) {
	destroy_server();
	return -40;
    } else {
	/* Get the bound IP address */
	int namelen = sizeof(server->addr);
	pj_sockaddr addr;

	status = pj_sock_getsockname(server->sock, &server->addr, &namelen);
	if (status != PJ_SUCCESS) {
	    destroy_server();
	    return -43;
	}

	status = pj_gethostip(pj_AF_INET(), &addr);
	if (status != PJ_SUCCESS) {
	    destroy_server();
	    return -45;
	}

	pj_sockaddr_copy_addr(&server->addr, &addr);
    }


    /* Create worker thread */
    status = pj_thread_create(pool, "server", &server_thread, 0, 0, 0, &server->thread);
    if (status != PJ_SUCCESS) {
	destroy_server();
	return -30;
    }

    return 0;
}
开发者ID:Antares84,项目名称:asuswrt-merlin,代码行数:81,代码来源:sess_auth.c


示例17: server_non_ssl

/* SSL socket try to connect to raw TCP socket server, once
 * connection established, SSL socket will try to perform SSL
 * handshake. SSL client socket should be able to close the
 * connection after specified timeout period (set ms_timeout to 
 * 0 to disable timer).
 */
static int server_non_ssl(unsigned ms_timeout)
{
    pj_pool_t *pool = NULL;
    pj_ioqueue_t *ioqueue = NULL;
    pj_timer_heap_t *timer = NULL;
    pj_activesock_t *asock_serv = NULL;
    pj_ssl_sock_t *ssock_cli = NULL;
    pj_activesock_cb asock_cb = { 0 };
    pj_sock_t sock = PJ_INVALID_SOCKET;
    pj_ssl_sock_param param;
    struct test_state state_serv = { 0 };
    struct test_state state_cli = { 0 };
    pj_sockaddr addr, listen_addr;
    pj_status_t status;

    pool = pj_pool_create(mem, "ssl_connect_raw_tcp", 256, 256, NULL);

    status = pj_ioqueue_create(pool, 4, &ioqueue);
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    status = pj_timer_heap_create(pool, 4, &timer);
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    /* SERVER */
    state_serv.pool = pool;
    state_serv.ioqueue = ioqueue;

    status = pj_sock_socket(pj_AF_INET(), pj_SOCK_STREAM(), 0, &sock);
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    /* Init bind address */
    {
	pj_str_t tmp_st;
	pj_sockaddr_init(PJ_AF_INET, &listen_addr, pj_strset2(&tmp_st, "127.0.0.1"), 0);
    }

    status = pj_sock_bind(sock, (pj_sockaddr_t*)&listen_addr, 
			  pj_sockaddr_get_len((pj_sockaddr_t*)&listen_addr));
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    status = pj_sock_listen(sock, PJ_SOMAXCONN);
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    asock_cb.on_accept_complete = &asock_on_accept_complete;
    status = pj_activesock_create(pool, sock, pj_SOCK_STREAM(), NULL, 
				  ioqueue, &asock_cb, &state_serv, &asock_serv);
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    status = pj_activesock_start_accept(asock_serv, pool);
    if (status != PJ_SUCCESS)
	goto on_return;

    /* Update listener address */
    {
	int addr_len;

	addr_len = sizeof(listen_addr);
	pj_sock_getsockname(sock, (pj_sockaddr_t*)&listen_addr, &addr_len);
    }

    /* CLIENT */
    pj_ssl_sock_param_default(&param);
    param.cb.on_connect_complete = &ssl_on_connect_complete;
    param.cb.on_data_read = &ssl_on_data_read;
    param.cb.on_data_sent = &ssl_on_data_sent;
    param.ioqueue = ioqueue;
    param.timer_heap = timer;
    param.timeout.sec = 0;
    param.timeout.msec = ms_timeout;
    pj_time_val_normalize(&param.timeout);
    param.user_data = &state_cli;

    state_cli.pool = pool;
    state_cli.is_server = PJ_FALSE;
    state_cli.is_verbose = PJ_TRUE;

    status = pj_ssl_sock_create(pool, &param, &ssock_cli);
    if (status != PJ_SUCCESS) {
	goto on_return;
    }

    /* Init default bind address */
//.........这里部分代码省略.........
开发者ID:kaaustubh,项目名称:pjsip,代码行数:101,代码来源:ssl_sock.c


示例18: compliance_test_2

/*
 * Repeated connect/accept on the same listener socket.
 */
static int compliance_test_2(pj_bool_t allow_concur)
{
#if defined(PJ_SYMBIAN) && PJ_SYMBIAN!=0
    enum { MAX_PAIR = 1, TEST_LOOP = 2 };
#else
    enum { MAX_PAIR = 4, TEST_LOOP = 2 };
#endif

    struct listener
    {
	pj_sock_t	     sock;
	pj_ioqueue_key_t    *key;
	pj_sockaddr_in	     addr;
	int		     addr_len;
    } listener;

    struct server
    {
	pj_sock_t	     sock;
	pj_ioqueue_key_t    *key;
	pj_sockaddr_in	     local_addr;
	pj_sockaddr_in	     rem_addr;
	int		     rem_addr_len;
	pj_ioqueue_op_key_t  accept_op;
    } server[MAX_PAIR];

    struct client
    {
	pj_sock_t	     sock;
	pj_ioqueue_key_t    *key;
    } client[MAX_PAIR];

    pj_pool_t *pool = NULL;
    char *send_buf, *recv_buf;
    pj_ioqueue_t *ioque = NULL;
    int i, bufsize = BUF_MIN_SIZE;
    pj_ssize_t status;
    int test_loop, pending_op = 0;
    pj_timestamp t_elapsed;
    pj_str_t s;
    pj_status_t rc;

    listener.sock = PJ_INVALID_SOCKET;
    listener.key = NULL;
    
    for (i=0; i<MAX_PAIR; ++i) {
    	server[i].sock = PJ_INVALID_SOCKET;
    	server[i].key = NULL;
    }
    
    for (i=0; i<MAX_PAIR; ++i) {
    	client[i].sock = PJ_INVALID_SOCKET;
    	client[i].key = NULL;	
    }
    
    // Create pool.
    pool = pj_pool_create(mem, NULL, POOL_SIZE, 4000, NULL);


    // Create I/O Queue.
    rc = pj_ioqueue_create(pool, PJ_IOQUEUE_MAX_HANDLES, &ioque);
    if (rc != PJ_SUCCESS) {
        app_perror("...ERROR in pj_ioqueue_create()", rc);
	return -10;
    }


    // Concurrency
    rc = pj_ioqueue_set_default_concurrency(ioque, allow_concur);
    if (rc != PJ_SUCCESS) {
        app_perror("...ERROR in pj_ioqueue_set_default_concurrency()", rc);
	return -11;
    }

    // Allocate buffers for send and receive.
    send_buf = (char*)pj_pool_alloc(pool, bufsize);
    recv_buf = (char*)pj_pool_alloc(pool, bufsize);

    // Create listener socket
    rc = pj_sock_socket(pj_AF_INET(), pj_SOCK_STREAM(), 0, &listener.sock);
    if (rc != PJ_SUCCESS) {
        app_perror("...error creating socket", rc);
        status=-20; goto on_error;
    }

    // Bind listener socket.
    pj_sockaddr_in_init(&listener.addr, 0, 0);
    if ((rc=pj_sock_bind(listener.sock, &listener.addr, sizeof(listener.addr))) != 0 ) {
        app_perror("...bind error", rc);
	status=-30; goto on_error;
    }

    // Get listener address.
    listener.addr_len = sizeof(listener.addr);
    rc = pj_sock_getsockname(listener.sock, &listener.addr, &listener.addr_len);
    if (rc != PJ_SUCCESS) {
        app_perror("...ERROR in pj_sock_getsockname()", rc);
//.........这里部分代码省略.........
开发者ID:vinc6nt,项目名称:p2pnt,代码行数:101,代码来源:ioq_tcp.c


示例19: compliance_test_0

/*
 * Compliance test for success scenario.
 */
static int compliance_test_0(pj_bool_t allow_concur)
{
    pj_sock_t ssock=-1, csock0=-1, csock1=-1;
    pj_sockaddr_in addr, client_addr, rmt_addr;
    int client_addr_len;
    pj_pool_t *pool = NULL;
    char *send_buf, *recv_buf;
    pj_ioqueue_t *ioque = NULL;
    pj_ioqueue_key_t *skey=NULL, *ckey0=NULL, *ckey1=NULL;
    pj_ioqueue_op_key_t accept_op;
    int bufsize = BUF_MIN_SIZE;
    pj_ssize_t status = -1;
    int pending_op = 0;
    pj_timestamp t_elapsed;
    pj_str_t s;
    pj_status_t rc;

    // Create pool.
    pool = pj_pool_create(mem, NULL, POOL_SIZE, 4000, NULL);

    // Allocate buffers for send and receive.
    send_buf = (char*)pj_pool_alloc(pool, bufsize);
    recv_buf = (char*)pj_pool_alloc(pool, bufsize);

    // Create server socket and client socket for connecting
    rc = pj_sock_socket(pj_AF_INET(), pj_SOCK_STREAM(), 0, &ssock);
    if (rc != PJ_SUCCESS) {
        app_perror("...error creating socket", rc);
        status=-1; goto on_error;
    }

    rc = pj_sock_socket(pj_AF_INET(), pj_SOCK_STREAM(), 0, &csock1);
    if (rc != PJ_SUCCESS) {
        app_perror("...error creating socket", rc);
	status=-1; goto on_error;
    

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ pj_sock_socket函数代码示例发布时间:2022-05-30
下一篇:
C++ pj_sock_bind函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap